A decade of progress in liver regenerative medicine

Amelioration activity of the high bioaccessible chrysanthemum (Gongju) phenolics on alcohol-induced oxidative injury in AML-12 cells

The main bioavailable phenolics from of Gongju (GJ) and their mechanism for hepato-protection remain unclear. To select the GJ phenolics with high bioavailability, chrysanthemum digestion and Caco-2 cells were used and their hepato-protective potential were examined by using AML-12 cells. The digestive recovery and small intestinal transit rate of the main phenolic compounds ranged from 28.52 to 69.53% and 6.57% ∼ 15.50%, respectively. Among them, chlorogenic acid, 3,5-dicaffeoylquinic acid, and 1,5-dicaffeoylquinic acid, showed higher small intestinal transit rates and digestive recoveries. Furthermore, we found that by increasing intracellular Catalase (CAT) and Superoxide dismutase (SOD) viability and lowering Malondialdehyde (MDA) level (P < 0.05), 3,5-dicaffeoylquinic acid significantly mitigated the oxidative damage of AML-12 liver cells more than the other two phenolics. Our results demonstrated that 3,5-dicaffeoylquninic acid was the primary phenolic compounds in GJ that effectively reduced liver damage, providing a theoretical basis for the development of GJ as a potentially useful resource for hepatoprotective diet.

Tissue chips as headway model and incitement technology

Tissue on a chip or organ-on-chip (OOC) is a technology that's dignified to form a transformation in drug discovery through the use of advanced platforms. These are 3D in-vitro cell culture models that mimic micro-environment of human organs or tissues on artificial microstructures built on a portable microfluidic chip without involving sacrificial humans or animals. This review article aims to offer readers a thorough and insightful understanding of technology. It begins with an in-depth understanding of chip design and instrumentation, underlining its pivotal role and the imperative need for its development in the modern scientific landscape. The review article explores into the myriad applications of OOC technology, showcasing its transformative impact on fields such as radiobiology, drug discovery and screening, and its pioneering use in space research. In addition to highlighting these diverse applications, the article provides a critical analysis of the current challenges that OOC technology faces. It examines both the biological and technical limitations that hinder its progress and efficacy and discusses the potential advancements and innovations that could drive the OOC technology forward. Through this comprehensive review, readers will gain a deep appreciation of the significance, capabilities, and evolving landscape of OOC technology.

In silico screening and in vivo experimental validation of 15-PGDH inhibitors from traditional Chinese medicine promoting liver regeneration

The enzyme 15-hydroxyprostaglandin dehydrogenase (15-PGDH), which acts as a negative regulator of prostaglandin E2 (PGE2) levels and activity, represents a promising pharmacological target for promoting liver regeneration. In this study, we collected data on 15-PGDH homologous family proteins, their inhibitors, and traditional Chinese medicine (TCM) compounds. Leveraging machine learning and molecular docking techniques, we constructed a prediction model for virtual screening of 15-PGDH inhibitors from TCM compound library and successfully screened genistein as a potential 15-PGDH inhibitor. Through further validation, it was discovered that genistein considerably enhances liver regeneration by inhibiting 15-PGDH, resulting in a significant increase in the PGE2 level. Genistein's effectiveness suggests its potential as a novel therapeutic agent for liver diseases, highlighting this study's contribution to expanding the clinical applications of TCM.

DLM-GelMA/tumor slice sandwich structured tumor on a chip for drug efficacy testing

The in vitro recapitulation of tumor microenvironment is of great interest to preclinical screening of drugs. Compared with culture of cell lines, tumor organ slices can better preserve the complex tumor architecture and phenotypic activity of native cells, but are limited by their exposure to fluid shear and gradual degradation under perfusion culture. Here, we established a decellularized liver matrix (DLM)-GelMA "sandwich" structure and a perfusion-based microfluidic platform to support long-term culture of tumor slices with excellent structural integrity and cell viability over 7 days. The DLM-GelMA was able to secrete cytokines and growth factors while providing shear protection to the tumor slice via the sandwich structure, leading to the preservation of the tumor microenvironment where immune cells (CD3, CD8, CD68), tumor-associated fibroblasts (α-SMA), and extracellular matrix components (collagen I, fibronectin) were well maintained. Furthermore, this chip presented anti-tumor efficacy at cisplatin (20 μM) on tumor patients, demonstrating our platform's efficacy to design patient-specific treatment regimens. Taken together, the successful development of this DLM-GelMA sandwich structure on the chip could faithfully reflect the tumor microenvironment and immune response, accelerating the screening process of drug molecules and providing insights for practical medicine.

3D Printing of a Vascularized Mini-Liver Based on the Size-Dependent Functional Enhancements of Cell Spheroids for Rescue of Liver Failure

The emerging stem cell-derived hepatocyte-like cells (HLCs) are the alternative cell sources of hepatocytes for treatment of highly lethal acute liver failure (ALF). However, the hostile local environment and the immature cell differentiation may compromise their therapeutic efficacy. To this end, human adipose-derived mesenchymal stromal/stem cells (hASCs) are engineered into different-sized multicellular spheroids and co-cultured with 3D coaxially and hexagonally patterned human umbilical vein endothelial cells (HUVECs) in a liver lobule-like manner to enhance their hepatic differentiation efficiency. It is found that small-sized hASC spheroids, with a diameter of ≈50 µm, show superior pro-angiogenic effects and hepatic differentiation compared to the other counterparts. The size-dependent functional enhancements are mediated by the Wnt signaling pathway. Meanwhile, co-culture of hASCs with HUVECs, at a HUVECs/hASCs seeding density ratio of 2:1, distinctly promotes hepatic differentiation and vascularization both in vitro and in vivo, especially when endothelial cells are patterned into hollow hexagons. After subcutaneous implantation, the mini-liver, consisting of HLC spheroids and 3D-printed interconnected vasculatures, can effectively improve liver regeneration in two ALF animal models through amelioration of local oxidative stress and inflammation, reduction of liver necrosis, as well as increase of cell proliferation, thereby showing great promise for clinical translation.

Using Liver Organoids as Models to Study the Pathobiology of Rare Liver Diseases

Liver organoids take advantage of several important features of pluripotent stem cells that self-assemble in a three-dimensional culture matrix and reproduce many aspects of the complex organization found within their native tissue or organ counterparts. Compared to other 2D or 3D in vitro models, organoids are widely believed to be genetically stable or docile structures that can be programmed to virtually recapitulate certain biological, physiological, or pathophysiological features of original tissues or organs in vitro. Therefore, organoids can be exploited as effective substitutes or miniaturized models for the study of the developmental mechanisms of rare liver diseases, drug discovery, the accurate evaluation of personalized drug responses, and regenerative medicine applications. However, the bioengineering of organoids currently faces many groundbreaking challenges, including a need for a reasonable tissue size, structured organization, vascularization, functional maturity, and reproducibility. In this review, we outlined basic methodologies and supplements to establish organoids and summarized recent technological advances for experimental liver biology. Finally, we discussed the therapeutic applications and current limitations.

Preventing acute liver injury via hepatocyte-targeting nano-antioxidants

Acute liver injury (ALI) is a severe liver disease that is characterized by sudden and massive hepatocyte necrosis and deterioration of liver functions. Oxidative stress is increasingly recognized as a key factor in the induction and progression of ALI. Scavenging excessive reactive oxygen species (ROS) with antioxidants has become a promising therapeutic option, but intrinsically hepatocyte-targeting antioxidants with excellent bioavailability and biocompatibility are yet to be developed. Herein, self-assembling nanoparticles (NPs) composed of amphiphilic polymers are introduced to encapsulate organic Selenium compound L-Se-methylselenocysteine (SeMC) and form SeMC NPs, which protect the viabilities and functions of cultured hepatocytes in drug- or chemical-induced acute hepatotoxicity models via efficient ROS removal. After further functionalization with the hepatocyte-targeting ligand glycyrrhetinic acid (GA), the resultant GA-SeMC NPs exhibit enhanced hepatocyte uptake and liver accumulation. In mouse models of ALI induced by acetaminophen (APAP) or carbon tetrachloride (CCl4 ), treatment with GA-SeMC NPs significantly decrease the levels of hepatic lipid peroxidation, tissue vacuolization and serum liver transaminases, while prominently increase that of endogenous antioxidant enzymes. Our study therefore presents a liver-targeting drug delivery strategy for the prevention and treatment of hepatic diseases.

A biomimetic renal fibrosis progression model on-chip evaluates anti-fibrotic effects longitudinally in a dynamic fibrogenic niche

Although renal fibrosis can advance chronic kidney disease and progressively lead to end-stage renal failure, no effective anti-fibrotic drugs have been clinically approved. To aid drug development, we developed a biomimetic renal fibrosis progression model on-chip to evaluate anti-fibrotic effects of natural killer cell-derived extracellular vesicles and pirfenidone (PFD) across different fibrotic stages. First, the dynamic interplay between fibroblasts and kidney-derived extracellular matrix (ECM) resembling the fibrogenic niche on-chip demonstrated that myofibroblasts induced by stiff ECM in 3 days were reversed to fibroblasts by switching to soft ECM, which was within 2, but not 7 days. Second, PFD significantly down-regulated the expression of α-SMA in NRK-49F in medium ECM, as opposed to stiff ECM. Third, a study in rats showed that early administration of PFD significantly inhibited renal fibrosis in terms of the expression levels of α-SMA and YAP. Taken together, both on-chip and animal models indicate the importance of early anti-fibrotic intervention for checking the progression of renal fibrosis. Therefore, this renal fibrosis progression on-chip with a feature of recapitulating dynamic biochemical and biophysical cues can be readily used to assess anti-fibrotic candidates and to explore the tipping point when the fibrotic fate can be rescued for better medical intervention.

Whole Liver Derived Acellular Extracellular Matrix for Bioengineering of Liver Constructs: An Updated Review

Biomaterial templates play a critical role in establishing and bioinstructing three-dimensional cellular growth, proliferation and spatial morphogenetic processes that culminate in the development of physiologically relevant in vitro liver models. Various natural and synthetic polymeric biomaterials are currently available to construct biomimetic cell culture environments to investigate hepatic cell-matrix interactions, drug response assessment, toxicity, and disease mechanisms. One specific class of natural biomaterials consists of the decellularized liver extracellular matrix (dECM) derived from xenogeneic or allogeneic sources, which is rich in bioconstituents essential for the ultrastructural stability, function, repair, and regeneration of tissues/organs. Considering the significance of the key design blueprints of organ-specific acellular substrates for physiologically active graft reconstruction, herein we showcased the latest updates in the field of liver decellularization-recellularization technologies. Overall, this review highlights the potential of acellular matrix as a promising biomaterial in light of recent advances in the preparation of liver-specific whole organ scaffolds. The review concludes with a discussion of the challenges and future prospects of liver-specific decellularized materials in the direction of translational research.

Toward Transplantation of Liver Organoids: From Biology and Ethics to Cost-effective Therapy

Liver disease is a common cause of morbidity and mortality, and many patients would benefit from liver transplantation. However, because of a shortage of suitable donor livers, even of those patients who are placed on the donor liver waiting list, many do not survive the waiting time for transplantation. Therefore, alternative treatments for end-stage liver disease need to be explored. Recent advances in organoid technology might serve as a solution to overcome the donor liver shortage in the future. In this overview, we highlight the potential of organoid technology for cell therapy and tissue engineering approaches. Both organoid-based approaches could be used as treatment for end-stage liver disease patients. Additionally, organoid-based cell therapy can also be used to repair liver grafts ex vivo to increase the supply of transplantable liver tissue. The potential of both approaches to become clinically available is carefully assessed, including their clinical, ethical, and economic implications. We provide insight into what aspects should be considered further to allow alternatives to donor liver transplantation to be successfully clinically implemented.

Generation and metabolomic characterization of functional ductal organoids with biliary tree networks in decellularized liver scaffolds

Developing functional ductal organoids (FDOs) is essential for liver regenerative medicine. We aimed to construct FDOs with biliary tree networks in rat decellularized liver scaffolds (DLSs) with primary cholangiocytes isolated from mouse bile ducts. The developed FDOs were dynamically characterized by functional assays and metabolomics for bioprocess clarification. FDOs were reconstructed in DLSs retaining native structure and bioactive factors with mouse primary cholangiocytes expressing enriched biomarkers. Morphological assessment showed that biliary tree-like structures gradually formed from day 3 to day 14. The cholangiocytes in FDOs maintained high viability and expressed 11 specific biomarkers. Basal-apical polarity was observed at day 14 with immunostaining for E-cadherin and acetylated α-tubulin. The rhodamine 123 transport assay and active collection of cholyl-lysyl-fluorescein exhibited the specific functions of bile secretion and transportation at day 14 compared to those in monolayer and hydrogel culture systems. The metabolomics analysis with 1075 peak pairs showed that serotonin, as a key molecule of the tryptophan metabolism pathway linked to biliary tree reconstruction, was specifically expressed in FDOs during the whole period of culture. Such FDOs with biliary tree networks and serotonin expression may be applied for disease modeling and drug screening, which paves the way for future clinical therapeutic applications.

Cellular therapies in liver and pancreatic diseases

Over the past two decades, developments in regenerative medicine in gastroenterology have been greatly enhanced by the application of stem cells, which can self-replicate and differentiate into any somatic cell. The discovery of induced pluripotent stem cells has opened remarkable perspectives on tissue regeneration, including their use as a bridge to transplantation or as supportive therapy in patients with organ failure. The improvements in DNA manipulation and gene editing strategies have also allowed to clarify the physiopathology and to correct the phenotype of several monogenic diseases, both in vivo and in vitro. Further progress has been made with the development of three-dimensional cultures, known as organoids, which have demonstrated morphological and functional complexity comparable to that of a miniature organ. Hence, owing to its protean applications and potential benefits, cell and organoid transplantation has become a hot topic for the management of gastrointestinal diseases. In this review, we describe current knowledge on cell therapies in hepatology and pancreatology, providing insight into their future applications in regenerative medicine.

3D-printed PLA/Gel hybrid in liver tissue engineering: Effects of architecture on biological functions

The liver is one of the vital organs in the body, and the gold standard of treatment for liver function impairment is liver transplantation, which poses many challenges. The specific three-dimensional (3D) structure of liver, which significantly impacts the growth and function of its cells, has made biofabrication with the 3D printing of scaffolds suitable for this approach. In this study, to investigate the effect of scaffold geometry on the performance of HepG2 cells, poly-lactic acid (PLA) polymer was used as the input of the fused deposition modeling (FDM) 3D-printing machine. Samples with simple square and bioinspired hexagonal cross-sectional designs were printed. One percent and 2% of gelatin coating were applied to the 3D printed PLA to improve the wettability and surface properties of the scaffold. Scanning electron microscopy pictures were used to analyze the structural properties of PLA-Gel hybrid scaffolds, energy dispersive spectroscopy to investigate the presence of gelatin, water contact angle measurement for wettability, and weight loss for degradation. In vitro tests were performed by culturing HepG2 cells on the scaffold to evaluate the cell adhesion, viability, cytotoxicity, and specific liver functions. Then, high-precision scaffolds were printed and the presence of gelatin was detected. Also, the effect of geometry on cell function was confirmed in viability, adhesion, and functional tests. The albumin and urea production of the Hexagonal PLA scaffold was about 1.22 ± 0.02-fold higher than the square design in 3 days. This study will hopefully advance our understanding of liver tissue engineering toward a promising perspective for liver regeneration.

Establishment of acute liver failure model in Tibetan miniature pig and verified by dual plasma molecular adsorption system

BACKGROUND

Acute liver failure (ALF) is a severe liver disease with high morbidity and mortality rates. Animal models are important for research on ALF. This study aimed to establish a reproducible, Tibetan miniature pig model of D-galactosamine-induced ALF and verify it using a dual plasma molecular adsorption system (DPMAS).

METHODS

Tibet miniature pigs were randomly divided into four groups (A, B, C, D) after catheterization. D-galactosamine (D-gal) at 0.45, 0.40, 0.35, and 0.35 g/kg body weight, respectively, was injected through the catheter. Group D was treated with DPMAS 48 h after D-gal administration. Vital signs and blood index values were recorded every 12 h after D-gal administration. H&E, TUNEL, Ki67, and Masson staining tests were performed.

RESULTS

After D-gal administration, Tibetan miniature pigs developed different degrees of debilitation, loss of appetite, and jaundice. Survival times of groups A, B, C, and D were 39.7 ± 5.9, 53.0 ± 12.5,61.3 ± 8.1, and 61 ± 7 h, respectively. Blood levels of ALT, AST, TBIL, ammonia, PT, and inflammation factors significantly increased compared with baseline levels in the different groups (Ps < 0.05). Pathological results revealed a clear liver cell necrosis positive correlation with D-gal dose. However, DPMAS did not increase the survival time in ALF, ammonia, or liver cell necrosis.

CONCLUSION

We successfully established a reproducible Tibetan miniature pig model of d-galactosamine-induced ALF, and we believe that a dosage of 0.35 g/kg is optimal.

Engineered human liver based on pullulan-dextran hydrogel promotes mice survival after liver failure

Liver tissue engineering approaches aim to support drug testing, assistance devices, or transplantation. However, their suitability for clinical application remains unsatisfactory. Herein, we demonstrate the beneficial and biocompatible use of porous pullulan-dextran hydrogel for the self-assembly of hepatocytes and biliary-like cells into functional 3D microtissues. Using HepaRG cells, we obtained 21 days maintenance of engineered liver polarity, functional detoxification and excretion systems, as well as glycogen storage in hydrogel. Implantation on two liver lobes in mice of hydrogels containing 3800 HepaRG 3D structures of 100 ​μm in diameter, indicated successful engraftment and no signs of liver toxicity after one month. Finally, after acetaminophen-induced liver failure, when mice were transplanted with engineered livers on left lobe and peritoneal cavity, the survival rate at 7 days significantly increased by 31.8% compared with mice without cell therapy. These findings support the clinical potential of pullulan-dextran hydrogel for liver failure management.

Surface grafting of sericin onto thermoplastic polyurethanes to improve cell adhesion and function

Thermoplastic polyurethane (TPU) membrane has super physical-mechanical properties and biocompatibility, but the surface is inert and lack of active groups which limit its application in cell culture. Silk sericin (SS) can improve cell adhesion, proliferation, growth and metabolism. In this paper, SS was grafted onto the surface of TPU membrane by -NH₂ bridge to build a high efficiency cell culture membrane. The FT-IR spectrum results indicated SS was grafted by chemical bond. According to the SEM and AFM results, we found that the grafting of SS reduced the water contact angle by 43.31% and increased the surface roughness by about four times. When TPU-SS was used for HepG2 cell culture, the cell adhesion rate of TPU-SS was significantly higher than that of the general TCPS cell culture plate, and the cell proliferation rate was close to that of TCPS. FDA/EB staining showed that HepG2 cells remained a better cellular growth behavior. HepG2 cells had higher cell vitality including the albumin secretion and the intracellular total protein synthesis. Grafting SS maintained the stability of cell and significantly decreased the cytotoxicity by decreased LDH release. In conclusion, SS grafting is beneficial to cell culture in vitro, and provides a key material for bioartificial liver culture system.

Liver-on-a-chip: Considerations, advances, and beyond

The liver is the largest internal organ in the human body with largest mass of glandular tissue. Modeling the liver has been challenging due to its variety of major functions, including processing nutrients and vitamins, detoxification, and regulating body metabolism. The intrinsic shortfalls of conventional two-dimensional (2D) cell culture methods for studying pharmacokinetics in parenchymal cells (hepatocytes) have contributed to suboptimal outcomes in clinical trials and drug development. This prompts the development of highly automated, biomimetic liver-on-a-chip (LOC) devices to simulate native liver structure and function, with the aid of recent progress in microfluidics. LOC offers a cost-effective and accurate model for pharmacokinetics, pharmacodynamics, and toxicity studies. This review provides a critical update on recent developments in designing LOCs and fabrication strategies. We highlight biomimetic design approaches for LOCs, including mimicking liver structure and function, and their diverse applications in areas such as drug screening, toxicity assessment, and real-time biosensing. We capture the newest ideas in the field to advance the field of LOCs and address current challenges.

Construction of polysaccharide scaffold-based perfusion bioreactor supporting liver cell aggregates for drug screening

Rebuilding a suitable microenvironment of liver cells is the key challenge to enhancing the expression of hepatic functions for drug screening in vitro. To improve the microenvironment by providing the specific adhesive ligands for hepatocytes in the three-dimensional dynamic culture, a perfusion bioreactor with a pectin/alginate blend porous scaffold was constructed in this study. The galactosyl component in the main chain of pectin was able to be specifically recognized by the asialoglycoprotein receptor on the surface of hepatocytes, and subsequently promoted the adhesion and aggregation of hepatocytes co-cultured with hepatic non-parenchymal cells. The bioreactor was optimized for 4 h of dynamic inoculation followed by perfusion at a flow rate of 2 mL/min, which provided adequate oxygen supply and good mass transfer to the liver cells. During dynamic cultured in the bioreactor for 14 days, more multicellular aggregates were formed and were evenly distributed in the pectin/alginate blend scaffolds. The expressions of intercellular interaction and hepatic functions of the hepatocytes in aggregates were significantly enhanced in the three-dimensional dynamic group. Furthermore, the bioreactor not only markedly upregulated the cell polarity markers expression of hepatocytes but also enhanced their metabolic capacity to acetaminophen, isoniazid, and tolbutamide, which exhibited a significant concentration-dependent manner. Therefore, the pectin/alginate blend scaffold-based perfusion bioreactor appeared to be a promising candidate in the field of drug development and liver regeneration research.

Mesenchymal Stromal Cell on Liver Decellularised Extracellular Matrix for Tissue Engineering

Background: In end-stage chronic liver disease, transplantation represents the only curative option. However, the shortage of donors results in the death of many patients. To overcome this gap, it is mandatory to develop new therapeutic options. In the present study, we decellularised pig livers and reseeded them with allogeneic porcine mesenchymal stromal cells (pMSCs) to understand whether extracellular matrix (ECM) can influence and/or promote differentiation into hepatocyte-like cells (HLCs). Methods: After decellularisation with SDS, the integrity of ECM-scaffolds was examined by histological staining, immunofluorescence and scanning electron microscope. DNA quantification was used to assess decellularisation. pMSCs were plated on scaffolds by static seeding and maintained in in vitro culture for 21 days. At 3, 7, 14 and 21 days, seeded ECM scaffolds were evaluated for cellular adhesion and growth. Moreover, the expression of specific hepatic genes was performed by RT-PCR. Results: The applied decellularisation/recellularisation protocol was effective. The number of seeded pMSCs increased over the culture time points. Gene expression analysis of seeded pMSCs displayed a weak induction due to ECM towards HLCs. Conclusions: These results suggest that ECM may address pMSCs to differentiate in hepatocyte-like cells. However, only contact with liver-ECM is not enough to induce complete differentiation.

Recombinant Spidroin Microgel as the Base of Cell-Engineered Constructs Mediates Liver Regeneration in Rats

Aim: In this study, we seek to check if recombinant spidroin rS1/9 is applicable for cell-engineering construct development. Novel technologies of cell and tissue engineering are relevant for chronic liver failure management. Liver regeneration may represent one of the possible treatment options if a cell-engineered construct (CEC) is used. Nowadays, one can see the continuous study of various matrices to create an appropriate CEC. Materials and Methods: We have adhered allogenic liver cells and multipotent mesenchymal bone marrow stem cells (MMSC BM) to a microgel with recombinant spidroin rS1/9. Then we have studied the developed implantable CEC in a rat model (n = 80) of chronic liver failure achieved by prolonged poisoning with carbon tetrachloride. Results: Our results demonstrate that the CECs change the values of biochemical tests and morphological parameters in chronic liver failure in rats. Conclusion: We consider there to be a positive effect from the microgel-based CECs with recombinant spidroin rS1/9 in the treatment of chronic liver failure.

Unraveling the Complexity of Liver Disease One Cell at a Time

The human liver is a complex organ made up of multiple specialized cell types that carry out key physiological functions. An incomplete understanding of liver biology limits our ability to develop therapeutics to prevent chronic liver diseases, liver cancers, and death as a result of organ failure. Recently, single-cell modalities have expanded our understanding of the cellular phenotypic heterogeneity and intercellular cross-talk in liver health and disease. This review summarizes these findings and looks forward to highlighting new avenues for the application of single-cell genomics to unravel unknown pathogenic pathways and disease mechanisms for the development of new therapeutics targeting liver pathology. As these technologies mature, their integration into clinical data analysis will aid in patient stratification and in developing treatment plans for patients suffering from liver disease.

Advances in Organ-on-a-Chip Materials and Devices

The organ-on-a-chip (OoC) paves a way for biomedical applications ranging from preclinical to clinical translational precision. The current trends in the in vitro modeling is to reduce the complexity of human organ anatomy to the fundamental cellular microanatomy as an alternative of recreating the entire cell milieu that allows systematic analysis of medicinal absorption of compounds, metabolism, and mechanistic investigation. The OoC devices accurately represent human physiology in vitro; however, it is vital to choose the correct chip materials. The potential chip materials include inorganic, elastomeric, thermoplastic, natural, and hybrid materials. Despite the fact that polydimethylsiloxane is the most commonly utilized polymer for OoC and microphysiological systems, substitute materials have been continuously developed for its advanced applications. The evaluation of human physiological status can help to demonstrate using noninvasive OoC materials in real-time procedures. Therefore, this Review examines the materials used for fabricating OoC devices, the application-oriented pros and cons, possessions for device fabrication and biocompatibility, as well as their potential for downstream biochemical surface alteration and commercialization. The convergence of emerging approaches, such as advanced materials, artificial intelligence, machine learning, three-dimensional (3D) bioprinting, and genomics, have the potential to perform OoC technology at next generation. Thus, OoC technologies provide easy and precise methodologies in cost-effective clinical monitoring and treatment using standardized protocols, at even personalized levels. Because of the inherent utilization of the integrated materials, employing the OoC with biomedical approaches will be a promising methodology in the healthcare industry.

HOXA13 promotes liver regeneration through regulation of BMP-7

In-depth knowledge of liver regeneration could facilitate the development of therapies for liver injury and liver failure. As a member of the homeobox superfamily, HOXA13 plays an important role in regulating tumorigenesis and development. However, the exact role of HOXA13 in liver regeneration remains unclear. In this study, we confirmed that HOXA13 promotes hepatocyte proliferation both in vivo and in vitro. HOXA13 was upregulated during liver regeneration, and its overexpression further accelerated hepatocyte proliferation and liver function recovery during liver regeneration. Furthermore, we found that HOXA13 promoted hepatocyte proliferation and liver regeneration by upregulating bone morphogenetic protein-7 (BMP-7) mRNA. These findings provide a new potential target for the treatment of liver failure.

The Potential Clinical Use of Stem/Progenitor Cells and Organoids in Liver Diseases

The liver represents the most important metabolic organ of the human body. It is evident that an imbalance of liver function can lead to several pathological conditions, known as liver failure. Orthotropic liver transplantation (OLT) is currently the most effective and established treatment for end-stage liver diseases and acute liver failure (ALF). Due to several limitations, stem-cell-based therapies are currently being developed as alternative solutions. Stem cells or progenitor cells derived from various sources have emerged as an alternative source of hepatic regeneration. Therefore, hematopoietic stem cells (HSCs), mesenchymal stromal cells (MSCs), endothelial progenitor cells (EPCs), embryonic stem cells (ESCs) and induced pluripotent stem cells (iPSCs) are also known to differentiate into hepatocyte-like cells (HPLCs) and liver progenitor cells (LPCs) that can be used in preclinical or clinical studies of liver disease. Furthermore, these cells have been shown to be effective in the development of liver organoids that can be used for disease modeling, drug testing and regenerative medicine. In this review, we aim to discuss the characteristics of stem-cell-based therapies for liver diseases and present the current status and future prospects of using HLCs, LPCs or liver organoids in clinical trials.

In vitro safety and efficacy evaluation of a novel hybrid bioartificial liver system with simulated liver failure serum

BACKGROUND

Acute liver failure (ALF), which can potentially be treated with an artificial liver, is a fatal condition. The purpose of this study was to evaluate the safety and effectiveness of a novel hybrid bioartificial liver system (NHBLS) using simulated liver failure serum in vitro.

METHODS

The bioreactor in experimental group was cultivated with primary porcine hepatocytes, whereas in control group was not. Next, the simulated liver failure serum was treated using the NHBLS for 10 h. Changes in albumin (ALB), total bilirubin (TBIL), ammonia (Amm), total bile acid (TBA), creatinine (Cr), and blood urea nitrogen (BUN) were measured before treatment (0 h) and every 2 h during treatment. In addition, changes in NHBLS pressures, alanine aminotransferase (ALT), aspartate aminotransferase (AST), and lidocaine metabolism were also recorded.

RESULTS

The NHBLS worked steadily without unexpected occurrences during the treatment. Blood culture showed no bacterial growth after 7 days, and the endotoxin level was less than 0.5 EU. The TBIL, TBA, Cr, and BUN levels in both groups were markedly lower than those at 0 h (p < 0.05). The Amm level in experimental group was significantly lower than that in control group (p < 0.05). NHBLS pressures were also stable, and the hepatocytes in the bioreactor functioned well.

CONCLUSIONS

The preparation method for the simulated liver failure serum was optimized successfully, and the safety and effectiveness of the NHBLS in vitro were verified. Furthermore, the NHBLS significantly reduced the levels of Amm which can lead to hepatic encephalopathy.

Scavenging ROS to Alleviate Acute Liver Injury by ZnO-NiO@COOH

Currently, the incidence of acute liver injury (ALI) is increasing year by year, and infection with coronavirus disease 2019 (COVID-19) can also induce ALI, but there are still no targeted therapeutic drugs. ZnO-NiO particles is mainly used to clean up reactive oxygen species (ROS) in industrial wastewater, and it is insoluble in water. Its excellent properties are discovered and improved by adding shuttle-based bonds to make it more water-soluble. ZnO-NiO@COOH particles are synthetically applied to treat ALI. The p-n junction in ZnO-NiO@COOH increases the surface area and active sites, thereby creating large numbers of oxygen vacancies, which can quickly adsorb ROS. The content in tissues and serum levels of L-glutathione (GSH) and the GSH/oxidized GSH ratio are measured to assess the capacity of ZnO-NiO@COOH particles to absorb ROS. The ZnO-NiO@COOH particles significantly reduce the expression levels of inflammatory factors (i.e., IL-1, IL-6, and TNF-α), macrophage infiltration, and granulocyte activation. ZnO-NiO@COOH rapidly adsorb ROS in a short period of time to block the generation of inflammatory storms and gain time for the follow-up treatment of ALI, which has important clinical significance.

Development of digital organ-on-a-chip to assess hepatotoxicity and extracellular vesicle-based anti-liver cancer immunotherapy

Organ-on-a-chip systems have been increasingly recognized as attractive platforms to assess toxicity and to develop new therapeutic agents. However, current organ-on-a-chip platforms are limited by a “single pot” design, which inevitably requires holistic analysis and limits parallel processing. Here, we developed a digital organ-on-a-chip by combining a microwell array with cellular microspheres, which significantly increased the parallelism over traditional organ-on-a-chip for drug development. Up to 127 uniform liver cancer microspheres in this digital organ-on-a-chip format served as individual analytical units, allowing for analysis with high consistency and quick response. Our platform displayed evident anti-cancer efficacy at a concentration of 10 μM for sorafenib, and had greater alignment than the “single pot” organ-on-a-chip with a previous in vivo study. In addition, this digital organ-on-a-chip demonstrated the treatment efficacy of natural killer cell-derived extracellular vesicles for liver cancer at 50 μg/mL. The successful development of this digital organ-on-a-chip platform provides high-parallelism and a low-variability analytical tool for toxicity assessment and the exploration of new anticancer modalities, thereby accelerating the joint endeavor to combat cancer.

Graphic abstract

Supramolecular Adhesive Hydrogels for Tissue Engineering Applications

Tissue engineering is a promising and revolutionary strategy to treat patients who suffer the loss or failure of an organ or tissue, with the aim to restore the dysfunctional tissues and enhance life expectancy. Supramolecular adhesive hydrogels are emerging as appealing materials for tissue engineering applications owing to their favorable attributes such as tailorable structure, inherent flexibility, excellent biocompatibility, near-physiological environment, dynamic mechanical strength, and particularly attractive self-adhesiveness. In this review, the key design principles and various supramolecular strategies to construct adhesive hydrogels are comprehensively summarized. Thereafter, the recent research progress regarding their tissue engineering applications, including primarily dermal tissue repair, muscle tissue repair, bone tissue repair, neural tissue repair, vascular tissue repair, oral tissue repair, corneal tissue repair, cardiac tissue repair, fetal membrane repair, hepatic tissue repair, and gastric tissue repair, is systematically highlighted. Finally, the scientific challenges and the remaining opportunities are underlined to show a full picture of the supramolecular adhesive hydrogels. This review is expected to offer comparative views and critical insights to inspire more advanced studies on supramolecular adhesive hydrogels and pave the way for different fields even beyond tissue engineering applications.

Ectopic expansion and vascularization of engineered hepatic tissue based on heparinized acellular liver matrix and mesenchymal stromal cell spheroids

Engineered liver organogenesis is not yet a viable therapeutic option, but ectopic liver histogenesis may be possible. Accumulating evidence has suggested that cell-cell interactions and cell-matrix interactions play an important role in determining the properties of engineered hepatic tissue in vitro and in vivo. In the current study, we utilized heparinized decellularized liver scaffolds and bone marrow mesenchymal stromal cell spheroids to fabricate engineered hepatic tissue, which was subsequently implanted into the omentum of Sprague-Dawley rats with or without liver injury. The survival, liver-specific functions, differentiation level and regenerative potential of the implanted hepatocyte-like cells in this ectopic liver system were evaluated, together with the vascularization status and therapeutic potential of the engineered hepatic tissue. We demonstrated that these hepatic grafts could survive and possess hepatocyte specific function in this ectopic liver system but could also efficiently anastomose with host vascular networks. Furthermore, we found that hepatocyte-like cells within grafts expanded more than 9-fold over the course of 4 weeks in immunocompetent rats with injured livers. Immunostaining revealed that these hepatocyte-like cells could self-organize into cord-like structures in vivo. In addition, these hepatic grafts exhibited therapeutic potential in liver injury induced by CCl₄. To our knowledge, this is the first report demonstrating the generation of long-term vascularized hepatic parenchyma at ectopic sites based on decellularized liver scaffolds and stem cells. These results provide an economic and feasible method for engineering hepatic tissue from construction to transplantation. This methodology may be applicable in clinical medicine, especially metabolic liver diseases. STATEMENT OF SIGNIFICANCE: In this manuscript, we presented an optimized method for the hepatic engineered tissue (HET) from construction to transplantation. The core of this method is utilizing the combination of heparinized decellularized liver scaffolds and stem cell spheroids, which could provide necessary cell-cell and cell-extracellular matrix interactions for HET in vitro and in vivo. We proved that these hepatic grafts could possess hepatocyte specific function and exhibit strong proliferative activity in ectopic liver system, but also able to anastomose with the host vascular networks efficiently and be compatible with the host immune system. This methodology may be possible one day to apply in clinical medicine, especially metabolic liver diseases.

Optimizing the Decellularized Porcine Liver Scaffold Protocol

There are few existing methods for shortening the decellularization period for a human-sized whole-liver scaffold. Here, we describe a protocol that enables effective decellularization of the liver obtained from pigs weigh 120 ± 4.2 kg within 72 h. Porcine livers (approx. 1.5 kg) were decellularized for 3 days using a combination of chemical and enzymatic decellularization agents. After trypsin, sodium deoxycholate, and Triton X-100 perfusion, the porcine livers were completely translucent. Our protocol was efficient to promote cell removal, the preservation of extracellular matrix (ECM) components, and vascular tree integrity. In conclusion, our protocol is efficient to promote human-sized whole-liver scaffold decellularization and thus useful to generate bioengineered livers to overcome the shortage of organs.

Bioinspired Artificial Liver System with hiPSC-Derived Hepatocytes for Acute Liver Failure Treatment

Bioartificial liver (BAL) system has become a promising alternative to traditional liver transplantation in rescuing acute liver failure (ALF) patients. Herein, inspired by natural microstructure of hepatic lobules, a novel biomimetic bioartificial liver system (BBALS) is developed by integrating human induced pluripotent stem cell-derived hepatocytes (hiPSC-Heps) -laden microparticles and semipermeable microtubes into a microfluidic platform. As the working units are hepatic lobules-like semipermeable microtubes surrounding with serum-free suspension differentiated hiPSC-Heps microcarriers, the BBALS is endowed with functional cell aggregates and effective circulation system. Thus, the BBALS possesses high cell viability, favorable function regeneration, and effective substances exchange. Based on these features, a 3D liver chip with multiple parallel BBALS units is created for filtering the plasma of ALF rabbits, which validates the research significance and application potential of the proposed BBALS. Moreover, the novel integrated BBALS is applied to treat ALF rabbits and shows great advantages in increasing survival, generating serum proteins, and decreasing inflammation. These properties point to the broad prospects of BBALS in treating related diseases and improving traditional clinical methods.

Regenerative Medicine of Liver: Promises, Advances and Challenges

Liver tissue engineering is a rapidly developing field which combines the novel use of liver cells, appropriate biochemical factors, and engineering principles, in order to replace or regenerate damaged liver tissue or the organ. The aim of this review paper is to critically investigate different possible methods to tackle issues related with liver diseases/disorders mainly using regenerative medicine. In this work the various regenerative treatment options are discussed, for improving the prognosis of chronic liver disorders. By reviewing existing literature, it is apparent that the current popular treatment option is liver transplantation, although the breakthroughs of stem cell-based therapy and bioartificial liver technology make them a promising alternative.

Design and Usability Evaluations of a 3D-Printed Implantable Drug Delivery Device for Acute Liver Failure in Preclinical Settings

Acute liver failure (ALF) requiring liver transplantation is a disease that occurs due to rapid hepatocellular dysfunction. As liver transplantation has various limitations, including donor scarcity, high cost, and immuno-incompatibility, continuous local delivery of biopharmaceuticals to the liver tissue can be a promising ALF treatment option. Here, the in vivo safety and usability of a 3D-printed implantable drug delivery device for effective ALF treatment is evaluated. The implantable reservoir consists of a 3D-printed container and a semipermeable membrane for repeated administrations of drugs, specifically to the liver tissue. The physical stability and function of the 3D-printed reservoir are confirmed by the mechanical properties and in vitro drug release test, respectively. In mice implanted with the reservoir system, mortality, weight changes, clinical signs, hematological and serum biochemical changes, and organ weight changes are not observed, suggesting no foreign body reaction. The usability of the reservoir system is further evaluated using an ALF model of 70% hepatectomized mice treated with N-acetylcysteine through the system, showing cell-specific regeneration and significant liver injury alleviation. Overall, the 3D-printed reservoir system is safe for studying the therapeutic potential of ALF treatment, and it can be used for the delivery of various active pharmaceutical ingredients.

An extracorporeal bioartificial liver embedded with 3D-layered human liver progenitor-like cells relieves acute liver failure in pigs

Clinical advancement of the bioartificial liver is hampered by the lack of expandable human hepatocytes and appropriate bioreactors and carriers to encourage hepatic cells to function during extracorporeal circulation. We have recently developed an efficient approach for derivation of expandable liver progenitor-like cells from human primary hepatocytes (HepLPCs). Here, we generated immortalized and functionally enhanced HepLPCs by introducing FOXA3, a hepatocyte nuclear factor that enables potentially complete hepatic function. When cultured on macroporous carriers in an air-liquid interactive bioartificial liver (Ali-BAL) support device, the integrated cells were alternately exposed to aeration and nutrition and grew to form high-density three-dimensional constructs. This led to highly efficient mass transfer and supported liver functions such as albumin biosynthesis and ammonia detoxification via ureagenesis. In a porcine model of drug overdose-induced acute liver failure (ALF), extracorporeal Ali-BAL treatment for 3 hours prevented hepatic encephalopathy and led to markedly improved survival (83%, n = 6) compared to ALF control (17%, n = 6, P = 0.02) and device-only (no-cell) therapy (0%, n = 6, P = 0.003). The blood ammonia concentrations, as well as the biochemical and coagulation indices, were reduced in Ali-BAL-treated pigs. Ali-BAL treatment attenuated liver damage, ameliorated inflammation, and enhanced liver regeneration in the ALF porcine model and could be considered as a potential therapeutic avenue for patients with ALF.

Decellularized xenogeneic scaffolds in transplantation and tissue engineering: Immunogenicity versus positive cell stimulation

Seriously compromised function of some organs can only be restored by transplantation. Due to the shortage of human donors, the need to find another source of organs is of primary importance. Decellularized scaffolds of non-human origin are being studied as highly potential biomaterials for tissue engineering. Their biological nature and thus the ability to provide a naturally-derived environment for human cells to adhere and grow highlights their great advantage in comparison to synthetic scaffolds. Nevertheless, since every biomaterial implanted in the body generates immune reaction, studying the interaction of the scaffold with the surrounding tissues is necessary. This review aims to summarize current knowledge on the immunogenicity of semi-xenografts involved in transplantation. Moreover, positive aspects of the interaction between xenogeneic scaffold and human cells are discussed, focusing on specific roles of proteins associated with extracellular matrix in cell adhesion and signalling.

Boston Ivy-Inspired Disc-Like Adhesive Microparticles for Drug Delivery

Microparticles with strong adherence are expected as efficient drug delivery vehicles. Herein, we presented an ingenious hydrogel microparticle recapitulating the adhesion mechanism of Boston ivy tendrils adhesive discs (AD) for durable drug delivery. The particles were achieved by replicating a silica colloidal crystal aggregates assembled in a droplet template after rapid solvent extraction. Due to their unique shape, the nanostructure, and the sticky hydrogel component, such novel microparticles exhibited prominent adhesive property to the wet tissue environment. It was demonstrated that the bioinspired microcarriers loading with dexamethasone had a good therapeutic effect for ulcerative colitis due to the strong adhesion ability for prolonging the maintenance of drug availability. These virtues make the biomimetic microparticles potentially ideal for many practical clinical applications, such as drug delivery, bioimaging, and biodiagnostics.

Hollow Fiber and Nanofiber Membranes in Bioartificial Liver and Neuronal Tissue Engineering

To date, the creation of biomimetic devices for the regeneration and repair of injured or diseased tissues and organs remains a crucial challenge in tissue engineering. Membrane technology offers advanced approaches to realize multifunctional tools with permissive environments well-controlled at molecular level for the development of functional tissues and organs. Membranes in fiber configuration with precisely controlled, tunable topography, and physical, biochemical, and mechanical cues, can direct and control the function of different kinds of cells toward the recovery from disorders and injuries. At the same time, fiber tools also provide the potential to model diseases in vitro for investigating specific biological phenomena as well as for drug testing. The purpose of this review is to present an overview of the literature concerning the development of hollow fibers and electrospun fiber membranes used in bioartificial organs, tissue engineered constructs, and in vitro bioreactors. With the aim to highlight the main biomedical applications of fiber-based systems, the first part reviews the fibers for bioartificial liver and liver tissue engineering with special attention to their multifunctional role in the long-term maintenance of specific liver functions and in driving hepatocyte differentiation. The second part reports the fiber-based systems used for neuronal tissue applications including advanced approaches for the creation of novel nerve conduits and in vitro models of brain tissue. Besides presenting recent advances and achievements, this work also delineates existing limitations and highlights emerging possibilities and future prospects in this field.

Biomaterial-based cell delivery strategies to promote liver regeneration

Chronic liver disease and cirrhosis is a widespread and untreatable condition that leads to lifelong impairment and eventual death. The scarcity of liver transplantation options requires the development of new strategies to attenuate disease progression and reestablish liver function by promoting regeneration. Biomaterials are becoming an increasingly promising option to both culture and deliver cells to support in vivo viability and long-term function. There is a wide variety of both natural and synthetic biomaterials that are becoming established as delivery vehicles with their own unique advantages and disadvantages for liver regeneration. We review the latest developments in cell transplantation strategies to promote liver regeneration, with a focus on the use of both natural and synthetic biomaterials for cell culture and delivery. We conclude that future work will need to refine the use of these biomaterials and combine them with novel strategies that recapitulate liver organization and function in order to translate this strategy to clinical use.

A bioartificial liver support system integrated with a DLM/GelMA-based bioengineered whole liver for prevention of hepatic encephalopathy via enhanced ammonia reduction

Although bioartificial liver support systems (BLSSs) play an essential role in maintaining partial liver functions and detoxification for liver failure patients, hepatocytes are unanimously seeded in biomaterials, which lack the hierarchal structures and mechanical cues of native liver tissues. To address this challenge, we developed a new BLSS by combining a decellularized liver matrix (DLM)/GelMA-based bioengineered whole liver and a perfusion-based, oxygenated bioreactor. The novel bioengineered whole liver was fabricated by integrating photocrosslinkable gelatin (GelMA) and hepatocytes into a DLM. The combination of GelMA and the DLM not only provided a biomimetic extracellular microenvironment (ECM) for enhanced cell immobilization and growth with elevated hepatic functions (e.g., albumin secretion and CYP activities), but also provided biomechanical support to maintain the native structure of the liver. In addition, the perfusion-based, oxygenated bioreactor helped deliver oxygen to the interior tissues of the bioengineered liver, which was of importance for long-term culture. Most importantly, this new bioengineered whole liver decreased ammonia concentration by 45%, whereas direct seeding of hepatocytes in a naked DLM showed no significant reduction. Thus, the developed BLSS integrated with the DLM/GelMA-based bioengineered whole liver can potentially help elevate liver functions and prevent HE in liver failure patients while waiting for liver transplantation.

Tissue-Engineered Bile Ducts for Disease Modeling and Therapy

Recent biotechnical advances in the in vitro culture of cholangiocytes and generation of bioengineered biliary tissue have a high potential for creating biliary tissue to be used for disease modeling, drug screening, and transplantation. For the past few decades, scientists have searched for a source of cholangiocytes, focused on primary cholangiocytes or cholangiocytes derived from hepatocytes or stem cells. At the same time, the development of scaffolds for biliary tissue engineering for transplantation and modeling of cholangiopathies has been explored. In this review, we provide an overview on the current understanding of cholangiocytes sources, the effect of signaling molecules, and transcription factors on cell differentiation, along with the effects of extracellular matrix molecules and scaffolds on bioengineered biliary tissues, and their application in disease modeling and drug screening. Impact statement Over the past few decades, biliary tissue engineering has acquired significant attention, but currently a number of factors hinder this field to eventually generate bioengineered bile ducts that mimic in vivo physiology and are suitable for transplantation. In this review, we present the latest advances with respect to cell source selection, influence of growth factors and scaffolds, and functional characterization, as well as applications in cholangiopathy modeling and drug screening. This review is suited for a broad spectrum of readers, including fundamental liver researchers and clinicians with interest in the current state and application of bile duct engineering and disease modeling.

Stem cell therapy and tissue engineering strategies using cell aggregates and decellularized scaffolds for the rescue of liver failure

Liver failure is a lethal condition with hepatocellular dysfunction, and liver transplantation is presently the only effective treatment. However, due to the limited availability of donors and the potential immune rejection, novel therapeutic strategies are actively sought to restore the normal hepatic architectures and functions, especially for livers with inherited metabolic dysfunctions or chronic diseases. Although the conventional cell therapy has shown promising results, the direct infusion of hepatocytes is hampered by limited hepatocyte sources, poor cell viability, and engraftment. Hence, this review mainly highlights the role of stem cells and progenitors as the alternative cell source and summarizes the potential approaches based on tissue engineering to improve the delivery efficiency of cells. Particularly, the underlying mechanisms for cell therapy using stem cells and progenitors are discussed in two main aspects: paracrine effect and cell differentiation. Moreover, tissue-engineering approaches using cell aggregates and decellularized liver scaffolds for bioengineering of functional hepatic constructs are discussed and compared in terms of the potential to replicate liver physiological structures. In the end, a potentially effective strategy combining the premium advantages of stem cell aggregates and decellularized liver scaffolds is proposed as the future direction of liver tissue engineering and regeneration.

Regenerative medicine for the hepatobiliary system: A review

Liver transplantation, the only proven treatment for end-stage liver disease and acute liver failure, is hampered by the scarcity of donors. Regenerative medicine provides an alternative therapeutic approach. Tremendous efforts dedicated to liver regenerative medicine include the delivery of transplantable cells, microtissues, and bioengineered whole livers via tissue engineering and the maintenance of partial liver function via extracorporeal support. This brief review summarizes the current status of regenerative medicine for the hepatobiliary system. For liver regenerative medicine, the focus is on strategies for expansion of transplantable hepatocytes, generation of hepatocyte-like cells, and therapeutic potential of engineered tissues in liver disease models. For biliary regenerative medicine, the discussion concentrates on the methods for generation of cholangiocyte-like cells and strategies in the treatment of biliary disease. Significant advances have been made in large-scale and long-term expansion of liver cells. The development of tissue engineering and stem cell induction technology holds great promise for the future treatment of hepatobiliary diseases. The application of regenerative medicine in liver still lacks extensive animal experiments. Therefore, a large number of preclinical studies are necessary to provide sufficient evidence for their therapeutic effectiveness. Much remains to be done for the treatment of hepatobiliary diseases with regenerative medicine.

Biomimetic Design for Bio-Matrix Interfaces and Regenerative Organs

The urgent demand for transplanted organs has motivated the development of regenerative medicine to biomimetically reconstruct the structure and function of natural tissues or organs. The prerequisites for constructing multicellular organs include specific cell sources, suitable scaffolding material, and interconnective biofunctional interfaces. As some of the most complex systems in nature, human organs, tissues, and cellular units have unique "bio-matrix" physicochemical interfaces. Human tissues support a large number of cells with distinct biofunctional interfaces for compartmentalization related to metabolism, material exchange, and physical barriers. These naturally shaped biofunctional interfaces support critical metabolic functions that drive adaptive human behavior. In contrast, mutations and disorders during organogenesis can disrupt these interfaces as a consequence of disease and trauma. To replicate the appropriate structure and physiological function of tissues and organs, the biomaterials used in these approaches should have properties that mimic those of natural biofunctional interfaces. In this review, the focus is on the biomimetic design of functional interfaces and hierarchical structures for four regenerative organs, liver, kidney, lung, heart, and the immune system. Research on these organs provides understanding of cell-matrix interactions for hierarchically bioinspired material engineering, and guidance for the design of bioartificial organs. Finally, we provide perspectives on future challenges in biofunctional interface designs and discuss the obstacles that remain toward the generation of functional bioartificial organs.

Engineering liver microtissues for disease modeling and regenerative medicine

The burden of liver diseases is increasing worldwide, accounting for two million deaths annually. In the past decade, tremendous progress has been made in the basic and translational research of liver tissue engineering. Liver microtissues are small, three-dimensional hepatocyte cultures that recapitulate liver physiology and have been used in biomedical research and regenerative medicine. This review summarizes recent advances, challenges, and future directions in liver microtissue research. Cellular engineering approaches are used to sustain primary hepatocytes or produce hepatocytes derived from pluripotent stem cells and other adult tissues. Three-dimensional microtissues are generated by scaffold-free assembly or scaffold-assisted methods such as macroencapsulation, droplet microfluidics, and bioprinting. Optimization of the hepatic microenvironment entails incorporating the appropriate cell composition for enhanced cell-cell interactions and niche-specific signals, and creating scaffolds with desired chemical, mechanical and physical properties. Perfusion-based culture systems such as bioreactors and microfluidic systems are used to achieve efficient exchange of nutrients and soluble factors. Taken together, systematic optimization of liver microtissues is a multidisciplinary effort focused on creating liver cultures and on-chip models with greater structural complexity and physiological relevance for use in liver disease research, therapeutic development, and regenerative medicine.

Creating rat hepatocyte organoid as an in vitro model for drug testing

BACKGROUND

Liver organoids have recently been applied as models for liver disease and drug screening, especially when combined with liver-on-a-chip technologies. Compared to hepatocyte-like cells, primary hepatocytes have high functionality but cannot maintain their function when cultured in vitro. Mesenchymal stem cells (MSCs) enhance hepatocyte function and maintain hepatocyte metabolism when co-cultured with hepatocytes. MSCs can help induced pluripotent stem cells to generate an organoid structure via the MSC-based traction force triggered by extracellular matrix (ECM) proteins. In this study, primary hepatocytes were co-cultured with MSCs on a liver-derived ECM to generate liver organoids within a short duration.

AIM

To create hepatocyte organoids by co-culturing primary hepatocytes with MSCs on a porcine liver extracellular matrix (PLECM) gel.

METHODS

Perfusion and enzymatic hydrolysis were used to form the PLECM gel. Rat hepatocytes and human MSCs were mixed and plated on pre-solidified PLECM gel in a 48-well plate for 48 h to generate organoids. Generated organoids were evaluated through hematoxylin and eosin, periodic acid-Schiff, immuno-histological, and immunofluorescence staining, and quantitative PCR for alb, CYP450 gene markers, and urea cycle genes. Culture medium was collected to detect albumin (ALB) and urea production on days 2, 4, 6, 8, 14, and 20.

RESULTS

The whole porcine liver was perfused and enzymatically hydrolyzed to form a PLECM gel. The structural components and basement membrane composition of the ECM, such as collagen type I, collagen type IV, fibronectin, and laminin, were demonstrated to be retained. Through interaction of human MSCs with the liver-derived ECM, primary hepatocytes and human MSCs assembled together into a 3D construction and generated primary hepatocyte organoids for 48 h. The mRNAs of the gene alb, the CYP450 gene markers cyp1a1, cyp1a2, and cyp3a2 as well as urea cycle genes arg-1, asl, ass-1, cps-1, nags were highly expressed in hepatocyte organoids. Long-term survival of the primary hepatocyte organoids, as well as stable functionality, was demonstrated via ALB and urea production in vitro.

CONCLUSION

Our new method of creating primary hepatocyte organoids by co-culturing hepatocytes with MSCs on liver-derived ECM hydrogels could be used to develop models for liver disease and for drug screening.

Microfluidic organ-on-a-chip models of human liver tissue

The liver is the largest internal organ of the body with complex microarchitecture and function that plays critical roles in drug metabolism. Hepatotoxicity and drug-induced liver injury (DILI) caused by various drugs is the main reason for late-stage drug failures. Moreover, liver diseases are among the leading causes of death in the world, with the number of new cases arising each year. Although animal models have been used to understand human drug metabolism and toxicity before clinical trials, tridimensional microphysiological systems, such as liver-on-a-chip (Liver Chip) platforms, could better recapitulate features of human liver physiology and pathophysiology and thus, are often more predictive of human outcome. Liver Chip devices have shown promising results in mimicking in vivo condition by recapitulating the sinusoidal structure of the liver, maintaining high cell viability and cellular phenotypes, and emulating native liver functions. Here, we first review the cellular constituents and physiology of the liver and then critically discuss the state-of-the-art chip-based liver models and their applications in drug screening, disease modeling, and regenerative medicine. We finally address the pending issues of existing platforms and touch upon future directions for developing new, advanced on-chip models.