A multifaceted coating on titanium dictates osteoimmunomodulation and osteo/angio-genesis towards ameliorative osseointegration

Construction of Magnesium Phosphate Chemical Conversion Coatings with Different Microstructures on Titanium to Enhance Osteogenesis and Angiogenesis

Titanium (Ti) and its alloys are widely used as hard tissue substitutes in dentistry and orthopedics, but their low bioactivity leads to undesirable osseointegration defects in the early osteogenic phase. Surface modification is an important approach to overcome these problems. In the present study, novel magnesium phosphate (MgP) coatings with controllable structures were fabricated on the surface of Ti using the phosphate chemical conversion (PCC) method. The effects of the microstructure on the physicochemical and biological properties of the coatings on Ti were researched. The results indicated that accelerators in PCC solution were important factors affecting the microstructure and properties of the MgP coatings. In addition, the coated Ti exhibited excellent hydrophilicity, high bonding strength, and good corrosion resistance. Moreover, the biological results showed that the MgP coatings could improve the spread, proliferation, and osteogenic differentiation of mouse osteoblast cells (MC3T3-E1) and vascular differentiation of human umbilical vein endothelial cells (HUVECs), indicating that the coated Ti samples had a great effect on promoting osteogenesis and angiogenesis. Overall, this study provided a new research idea for the surface modification of conventional Ti to enhance osteogenesis and angiogenesis in different bone types for potential biomedical applications.

Multifaceted Materials for Enhanced Osteogenesis and Antimicrobial Properties on Bioplastic Polyetheretherketone Surfaces: A Review

Implant-associated infections and the increasing number of bone implants loosening and falling off after implantation have become urgent global challenges, hence the need for intelligent alternative solutions to combat implant loosening and falling off. The application of polyetheretherketone (PEEK) in biomedical and medical therapy has aroused great interest, especially because its elastic modulus close to bone provides an effective alternative to titanium implants, thereby preventing the possibility of bone implants loosening and falling off due to the mismatch of elastic modulus. In this Review, we provide a comprehensive overview of recent advances in surface modifications to prevent bone binding deficiency and bacterial infection after implantation of bone implants, starting with inorganics for surface modification, followed by organics that can effectively promote bone integration and antimicrobial action. In addition, surface modifications derived from cells and related products of biological activity have been proposed, and there is increasing evidence of clinical potential. Finally, the advantages and future challenges of surface strategies against medical associated poor osseointegration and infection are discussed, with promising prospects for developing novel osseointegration and antimicrobial PEEK materials.

Signaling pathways of dental implants' osseointegration: a narrative review on two of the most relevant; NF-κB and Wnt pathways

INTRODUCTION

Cell signaling pathways are the biological reactions that control cell functions and fate. They also directly affect the body reactions to implanted biomaterials. It is well-known that dental implants success depends on a successful integration with the alveolar bone: "osseointegration" which events comprise early and later responses to the implanted biomaterials. The early events are mainly immune-inflammatory responses to the implant considered by its microenvironment as a foreign body. Later reactions are osteogenic aiming to regulate bone formation and remodeling. All these events are controlled by the cell signaling pathways in an incredible harmonious coordination.

AIM

The number of pathways having a role in osseointegration is so big to be reviewed in a single article. So the aim of this review was to study only two of the most relevant ones: the inflammatory Nuclear Factor Kappa B (NF-κB) pathway regulating the early osseointegration events and the osteogenic Wnt pathway regulating later events.

METHODS

We conducted a literature review using key databases to provide an overview about the NF-κB and Wnt cell signaling pathways and their mutual relationship with dental implants. A simplified narrative approach was conducted to explain these cell signaling pathways, their mode of activation and how they are related to the cellular events of osseointegration.

RESULTS AND CONCLUSION

NF-κB and Wnt cell signaling pathways are important cross-talking pathways that are affected by the implant's material and surface characteristics. The presence of the implant itself in the bone alters the intracellular events of both pathways in the adjacent implant's cellular microenvironment. Both pathways have a great role in the success or failure of osseointegration. Such knowledge can offer a new hope to treat failed implants and enhance osseointegration in difficult cases. This is consistent with advances in Omics technologies that can change the paradigm of dental implant therapy.

Impact of surface biofunctionalization strategies on key effector cells response in polyacrylamide hydrogels for bone regeneration

Despite the clinical prevalence of various bone defect repair materials, a full understanding of their influence on bone repair and regeneration remains elusive. This study focuses on poly(acrylamide) (PAAm) hydrogels, popular 2D model substrates, which have regulable mechanical properties within physiological. However, their bio-inert nature requires surface biofunctionalization to enhance cell-material interactions and facilitate the study of bone repair mechanisms. We utilized PAAm hydrogels of varying stiffness (18, 76 and 295 kPa), employed sulfosuccinimidyl-6-(4'-azido-2'-nitropheny-lamino) hexanoate (sulfo-SANPAH) and N-(3-dimethylaminopropyl)-N-ethylcarbodiimide hydrochloride/N-hydroxysuccinimidyl acrylate (EDC/NHS) as crosslinkers, and cultured macrophages, endothelial cells, and bone mesenchymal stem cells on these hydrogels. Our findings indicated that sulfo-SANPAH's crosslinking efficiency surpassed that of EDC/NHS, irrespective of pore size and stiffness. Importantly, we observed that the stiffness and surface biofunctionalization method of hydrogels significantly impacted cell adhesion and proliferation. The collagen-modified hydrogels by EDC/NHS strategy failed to support the normal biological behavior of bone mesenchymal stem cells and hindered endothelial cell spreading. In contrast, these modified hydrogels by the sulfo-SANPAH method showed good cytocompatibility with the three types of cells. This study underscores the critical role of appropriate conjugation strategies for PAAm hydrogels, providing valuable insights for hydrogel surface modification in bone repair and regeneration research.

3D Printed Porous Zirconia Biomaterials based on Triply Periodic Minimal Surfaces Promote Osseointegration In Vitro by Regulating Osteoimmunomodulation and Osteo/Angiogenesis

The triply periodic minimal surface (TPMS) is a highly useful structure for bone tissue engineering owing to its nearly nonexistent average surface curvature, high surface area-to-volume ratio, and exceptional mechanical energy absorption properties. However, limited literature is available regarding bionic zirconia implants using the TPMS structure for bone regeneration. Herein, we employed the digital light processing (DLP) technology to fabricate four types of zirconia-based TPMS structures: P-cell, S14, IWP, and Gyroid. For cell proliferation, the four porous TPMS structures outperformed the solid zirconia group (P-cell > S14 > Gyroid > IWP > ZrO2). In vitro assessments on the biological responses and osteogenic properties of the distinct porous surfaces identified the IWP and Gyroid structures as promising candidates for future clinical applications of porous zirconia implants because of their superior osteogenic capabilities (IWP > Gyroid > S14 > P-cell > ZrO2) and mechanical properties (ZrO2 > IWP > Gyroid > S14 > P-cell). Furthermore, the physical properties of the IWP/Gyroid surface had more substantial effects on bone immune regulation by reducing macrophage M1 phenotype polarization while increasing M2 phenotype polarization compared with the solid zirconia surface. Additionally, the IWP and Gyroid groups exhibited enhanced immune osteogenesis and angiogenesis abilities. Collectively, these findings highlight the substantial impact of topology on bone/angiogenesis and immune regulation in promoting bone integration.

An oxidized dextran-composite self-healing coated magnesium scaffold reduces apoptosis to induce bone regeneration

Self-healing coatings have shown promise in controlling the degradation of scaffolds and addressing coating detachment issues. However, developing a self-healing coating for magnesium (Mg) possessing multiple biological functions in infectious environments remains a significant challenge. In this study, a self-healing coating was developed for magnesium scaffolds using oxidized dextran (OD), 3-aminopropyltriethoxysilane (APTES), and nano-hydroxyapatite (nHA) doped micro-arc oxidation (MHA), named OD-MHA/Mg. The results demonstrated that the OD-MHA coating effectively addresses coating detachment issues and controls the degradation of Mg in an infectious environment through self-healing mechanisms. Furthermore, the OD-MHA/Mg scaffold exhibits antibacterial, antioxidant, and anti-apoptotic properties, it also promotes bone repair by upregulating the expression of osteogenesis genes and proteins. The findings of this study indicate that the OD-MHA coated Mg scaffold possessing multiple biological functions presents a promising approach for addressing infectious bone defects. Additionally, the study showcases the potential of polysaccharides with multiple biological functions in facilitating tissue healing even in challenging environments.

Surface Functionalization of Titanium-Based Implants with a Nanohydroxyapatite Layer and Its Impact on Osteoblasts: A Systematic Review

This study aims to evaluate the influence of a nanohydroxyapatite layer applied to the surface of titanium or titanium alloy implants on the intricate process of osseointegration and its effect on osteoblast cell lines, compared to uncoated implants. Additionally, the investigation scrutinizes various modifications of the coating and their consequential effects on bone and cell line biocompatibility. On the specific date of November 2023, an exhaustive electronic search was conducted in esteemed databases such as PubMed, Web of Science, and Scopus, utilizing the meticulously chosen keywords ((titanium) AND ((osteoblasts) and hydroxyapatite)). Methodologically, the systematic review meticulously adhered to the PRISMA protocol. Initially, a total of 1739 studies underwent scrutiny, with the elimination of 741 duplicate records. A further 972 articles were excluded on account of their incongruence with the predefined subjects. The ultimate compilation embraced 26 studies, with a predominant focus on the effects of nanohydroxyapatite coating in isolation. However, a subset of nine papers delved into the nuanced realm of its modifiers, encompassing materials such as chitosan, collagen, silver particles, or gelatine. Across many of the selected studies, the application of nanohydroxyapatite coating exhibited a proclivity to enhance the osseointegration process. The modifications thereof showcased a positive influence on cell lines, manifesting in increased cellular spread or the attenuation of bacterial activity. In clinical applications, this augmentation potentially translates into heightened implant stability, thereby amplifying the overall procedural success rate. This, in turn, renders nanohydroxyapatite-coated implants a viable and potentially advantageous option in clinical scenarios where non-modified implants may not suffice.

A dual-functional strontium-decorated titanium implants that guides the immune response for osseointegration of osteoporotic rats

Due to the dynamic imbalance between osteogenesis and osteoclasis and the abnormal inflammatory microenvironment in situ, osteoporosis hampers the early osseointegration between implants and bones. To improve osseointegration with the osteoporosis, we first coated the titanium implants (Ti) with polydopamine (PDA) coating (Ti-PDA), followed by modification with strontium (Sr) to prepare the Ti-PDA-Sr implants. An osteoporotic rat model with femoral bone defect was verified to estimate the osseointegration of the implants. The Ti-PDA-Sr implants exhibited good biocompatibility with continuous release of Sr ions for up to 21 days. Ti-PDA-Sr implants promoted the osteogenesis of BMSCs and the polarization of BMMs to M2 phenotype compared to that of Ti and Ti-PDA implants, revealing the double-regulated effects in bone induction and immune regulation. According to the Micro-CT and histopathology results, Ti-PDA-Sr implants exhibited the most stable osseointegration between bone tissues and implants. According to the immunohistochemistry results, the Ti-PDA-Sr implants differentiated the BMMs to M2 phenotype, alleviating the abnormal inflammation in osteoporosis and preventing the consistent bone destruction between the implants and bone tissues. This study provides a practical and effective strategy in preparing bi-functional implants that can promote osseointegration with osteoporosis.

Investigation of In Vitro Cytocompatibility of Zinc-Containing Coatings Developed on Medical Magnesium Alloys

In a neutral solution, we investigated the effects of Na2[ZnEDTA] concentrations at 0, 6, 12, 18, and 24 g/L on surface morphology, chemical composition, degradation resistance, and in vitro cytocompatibility of micro-arc oxidation (MAO) coatings developed on WE43 (Mg-Y-Nd-Zr) magnesium alloys. The results show that the enhanced Na2[ZnEDTA] concentration increased the Zn amount but slightly decreased the degradation resistance of MAO-treated coatings. Among the zinc-containing MAO samples, the fabricated sample in the base solution added 6 g/L Na2[ZnEDTA] exhibits the smallest corrosion current density (6.84 × 10-7 A·cm-2), while the sample developed in the solution added 24 g/L Na2[ZnEDTA] and contains the highest Zn content (3.64 wt.%) but exhibits the largest corrosion current density (1.39 × 10-6 A·cm-2). Compared to untreated WE43 magnesium alloys, zinc-containing MAO samples promote initial cell adhesion and spreading and reveal enhanced cell viability. Coating degradation resistance plays a more important role in osseogenic ability than Zn content. Among the untreated WE43 magnesium alloys and the treated MAO samples, the sample developed in the base solution with 6 g/L Na2[ZnEDTA] reveals the highest ALP expression at 14 d. Our results indicate that the MAO samples formed in the solution with Na2[ZnEDTA] promoted degradation resistance and osseogenesis differentiation of the WE43 magnesium alloys, suggesting potential clinic applications.

Spatiotemporal Immunomodulation and Biphasic Osteo-Vascular Aligned Electrospun Membrane for Diabetic Periosteum Regeneration

Under diabetic conditions, blood glucose fluctuations and exacerbated immunopathological inflammatory environments pose significant challenges to periosteal regenerative repair strategies. Responsive immune regulation in damaged tissues is critical for the immune microenvironment, osteogenesis, and angiogenesis stabilization. Considering the high-glucose microenvironment of such acute injury sites, a functional glucose-responsive immunomodulation-assisted periosteal regeneration composite material-PLA（Polylactic Acid）/COLI(Collagen I）/Lipo(Liposome）-APY29 (PCLA)-is constructed. Aside from stimulating osteogenic differentiation, owing to the presence of surface self-assembled type I collagen in the scaffolds, PCLA can directly respond to focal area high-glucose microenvironments. The PCLA scaffolds trigger the release of APY29-loaded liposomes, shifting the macrophages toward the M2 phenotype, inhibiting the release of inflammatory cytokines, improving the bone immune microenvironment, and promoting osteogenic differentiation and angiogenesis. Bioinformatics analyses show that PCLA enhances bone repair by inhibiting the inflammatory signal pathway regulating the polarization direction and promoting osteogenic and angiogenic gene expression. In the calvarial periosteal defect model of diabetic rats, PCLA scaffolds induce M2 macrophage polarization and improve the inflammatory microenvironment, significantly accelerating periosteal repair. Overall, the PCLA scaffold material regulates immunity in fluctuating high-glucose inflammatory microenvironments, achieves relatively stable and favorable osteogenic microenvironments, and facilitates the effective design of functionalized biomaterials for bone regeneration therapy in patients with diabetes.

Protective effects of curcumin against osteoporosis and its molecular mechanisms: a recent review in preclinical trials

Osteoporosis (OP) is one of the most common metabolic skeletal disorders and is commonly seen in the elderly population and postmenopausal women. It is mainly associated with progressive loss of bone mineral density, persistent deterioration of bone microarchitecture, and increased fracture risk. To date, drug therapy is the primary method used to prevent and treat osteoporosis. However, long-term drug therapy inevitably leads to drug resistance and specific side effects. Therefore, researchers are constantly searching for new monomer compounds from natural plants. As a candidate for the treatment of osteoporosis, curcumin (CUR) is a natural phenolic compound with various pharmacological and biological activities, including antioxidant, anti-apoptotic, and anti-inflammatory. This compound has gained research attention for maintaining bone health in various osteoporosis models. We reviewed preclinical and clinical studies of curcumin in preventing and alleviating osteoporosis. These results suggest that if subjected to rigorous pharmacological and clinical trials, naturally-derived curcumin could be used as a complementary and alternative medicine for the treatment of osteoporosis by targeting osteoporosis-related mechanistic pathways. This review summarizes the mechanisms of action and potential therapeutic applications of curcumin in the prevention and mitigation of osteoporosis and provides reference for further research and development of curcumin.

Manufacture of titanium alloy materials with bioactive sandblasted surfaces and evaluation of osseointegration properties

Titanium alloys are some of the most important orthopedic implant materials currently available. However, their lack of bioactivity and osteoinductivity limits their osseointegration properties, resulting in suboptimal osseointegration between titanium alloy materials and bone interfaces. In this study, we used a novel sandblasting surface modification process to manufacture titanium alloy materials with bioactive sandblasted surfaces and systematically characterized their surface morphology and physicochemical properties. We also analyzed and evaluated the osseointegration between titanium alloy materials with bioactive sandblasted surfaces and bone interfaces by in vitro experiments with co-culture of osteoblasts and in vivo experiments with a rabbit model. In our in vitro experiments, the proliferation, differentiation, and mineralization of the osteoblasts on the surfaces of the materials with bioactive sandblasted surfaces were better than those in the control group. In addition, our in vivo experiments showed that the titanium alloy materials with bioactive sandblasted surfaces were able to promote the growth of trabecular bone on their surfaces compared to controls. These results indicate that the novel titanium alloy material with bioactive sandblasted surface has satisfactory bioactivity and osteoinductivity and exhibit good osseointegration properties, resulting in improved osseointegration between the material and bone interface. This work lays a foundation for subsequent clinical application research into titanium alloy materials with bioactive sandblasted surfaces.

Osteoporosis remission via an anti-inflammaging effect by icariin activated autophagy

The pace of bone formation slows down with aging, which leads to the development of osteoporosis. In addition to senescent bone marrow mesenchymal stem cells (S-BMSCs), senescent macrophages (S-MΦs) present in the bone marrow produce numerous inflammatory cytokines that contribute to the inflammaged microenvironment and are involved in the development of osteoporosis. Although autophagy activation has shown a significant anti-aging effect, its influence on inflammaging and its role in osteoporosis treatment remain unclear. Traditional Chinese herbal medicine contains bioactive components that exhibit remarkable advantages in bone regeneration. We have demonstrated that icariin (ICA), a bioactive component of traditional Chinese herbal medicine, activates autophagy, exerts a significant anti-inflammaging effect on S-MΦs, and rejuvenates osteogenesis of S-BMSCs, thereby alleviating bone loss in osteoporotic mice. The transcriptomic analysis further reveals that the TNF-α signaling pathway, which is significantly associated with the level of autophagy, regulates this effect. Moreover, the expression of senescence-associated secretory phenotype (SASP) is significantly reduced after ICA treatment. In summary, our findings suggest that bioactive components/materials targeting autophagy can effectively modulate the inflammaging of S-MΦs, offering an innovative treatment strategy for osteoporosis remission and various age-related comorbidities.

A novel implant surface modification mode of Fe3O4-containing TiO2 nanorods with sinusoidal electromagnetic field for osteoblastogenesis and angiogenesis

Implants made of Ti and its alloys are widely utilized in orthopaedic surgeries. However, insufficient osseointegration of the implants often causes complications such as aseptic loosening. Our previous research discovered that disordered titanium dioxide nanorods (TNrs) had satisfactory antibacterial properties and biocompatibility, but TNrs harmed angiogenic differentiation, which might retarded the osseointegration process of the implants. Magnetic nanomaterials have a certain potential in promoting osseointegration, electromagnetic fields within a specific frequency and intensity range can facilitate angiogenic and osteogenic differentiation. Therefore, this study used Fe₃O₄ to endow magnetism to TNrs and explored the regulation effects of Ti, TNrs, and Fe₃O₄-TNrs under 1 ​mT 15 ​Hz sinusoidal electromagnetic field (SEMF) on osteoblastogenesis, osseointegration, angiogenesis, and its mechanism. We discovered that after the addition of SEMF treatment to VR-EPCs cultured on Fe₃O₄-TNrs, the calcineurin/NFAT signaling pathway was activated, which then reversed the inhibitory effect of Fe₃O₄-TNrs on angiogenesis. Besides, Fe₃O₄-TNrs with SEMF enhanced osteogenic differentiation and osseointegration. Therefore, the implant modification mode of Fe₃O₄-TNrs with the addition of SEMF could more comprehensively promote osseointegration and provided a new idea for the modification of implants.

Rapid formation of 3D: Decellularized extracellular matrix spheroids for enhancing bone formation

Bone marrow mesenchymal stem cell sheet-derived spheroids (BMSCs spheroids) have been widely studied as native bioactive scaffolds. However, the abundant cells in BMSCs spheroids cause immunogenicity and make them difficult to store. This paper aimed to construct a new bioactive scaffold called 3D-decellularized extracellular matrix spheroids (ECM spheroids) via decellularization of BMSCs spheroids to enhance bone formation. Hematoxylin and eosin staining (HE), nuclear and cytoskeletal fluorescence, immunofluorescence (IF), and scanning electron microscopy (SEM) were utilized to detect the characteristics and components of ECM spheroids. Furthermore, the biological properties of migration, adhesion, and recellularization of cells in ECM spheroids were assessed in vitro, and bone formation was evaluated in rat calvarial defects. The results showed that both the nuclei and cytoskeleton in ECM spheroids were greatly altered and one of the major components of FN was intact. The migration, adhesion, and recellularization potential were improved in vitro. Meanwhile, ECM spheroids promoted osteogenesis in rat skull defects after 3 months (p < .01). In conclusion, ECM spheroids were successfully prepared and proven to promote cell migration, adhesion, and proliferation. Bone formation in vivo was also accelerated. We believe that ECM spheroids can be used as bioactive and biocompatible 3D scaffolds in the future.

Matrix stiffness-induced platelet activation determines immunomodulation of macrophages

Although various bone defect repair materials have been used clinically, the influence of the material properties on bone repair and regeneration as well as the underlying mechanisms are not fully understood. We hypothesize that the material stiffness affects initial platelet activation during hemostasis phase, which in turn mediates subsequent osteoimmunomodulation of macrophages, finally determining clinical outcomes. To verify the hypothesis, the present work used polyacrylamide hydrogels with different stiffness (10, 70, and 260 kPa) as model materials to investigate matrix stiffness induced platelet activation behavior and its mediation on osteoimmunomodulation of macrophages. The results showed that the matrix stiffness was positively related with activation degree of platelets. However, the extracts of platelets incubated on middle-stiff matrix polarized macrophages to pro-healing M2 phenotype when compared with that on soft and stiff matrixes. ELISA results showed when compared with that on soft and stiff matrixes, the platelets incubated on middle-stiff matrix released more TGF-β and PGE₂, both of which could polarize macrophages to M2 phenotype. The M2 macrophages could promote angiogenesis of endothelial cells and osteogenesis of bone marrow mesenchymal stem cells, two important and coupled processes involved in bone repair and regeneration. These findings suggest bone repair materials with 70 kPa stiffness can mediate proper platelet activation, which can polarize macrophages to pro-healing M2 phenotype, potentially contributing to bone repair and regeneration.

Long-term in vivo observations show biocompatibility and performance of ZX00 magnesium screws surface-modified by plasma-electrolytic oxidation in Göttingen miniature pigs

Bioabsorbable magnesium implants for orthopedic fixation of bone have recently become available for different fields of indication. While general questions of biocompatibility have been answered, tailoring suitable degradation kinetics for specific applications as well as long-term tissue integration remain the focus of current research. The aim of this study was the evaluation of the long-term degradation behavior and osseointegration of Mg-Ca-Zn (ZX00MEO) based magnesium implants with plasma-electrolytic oxidation (PEO) surface modification (ZX00MEO-PEO) in comparison to non-surface modified implants in vivo and in vitro. Besides a general evaluation of the biological performance of the alloy over a prolonged period, the main hypothesis was that PEO surface modification significantly reduces implant degradation rate and improves tissue interaction. In vitro, the microstructure and surface of the bioabsorbable screws were characterized by SEM/EDS, cytocompatibility and degradation testing facilitating hydrogen gas evolution, carried out following ISO 10993-5/-12 and ASTM F3268-18a/ASTM G1-03 (E1:2017). In vivo, screws were implanted in the frontal bone of Minipigs for 6, 12, and 18 months, following radiological and histomorphometric analysis. A slower and more uniform degradation and improved cytocompatibility could be shown for the ZX00MEO-PEO group in vitro. A significant reduction of degradation rate and enhanced bone formation around the ZX00MEO-PEO screws in vivo was confirmed. Proficient biocompatibility and tissue integration could generally be shown in vivo regardless of surface state. The tested magnesium alloy shows generally beneficial properties as an implant material, while PEO-surface modification further improves the bioabsorption behavior both in vitro and in vivo. STATEMENT OF SIGNIFICANCE: Devices from bioabsorbable Magnesium have recently been introduced to orthopedic applications. However, the vast degradation of Magnesium within the human body still gives limitations. While reliable in-vivo data on most promising surface treatments such as Plasma-electrolytic-Oxidation is generally scarce, long-time results in large animals are to this date completely missing. To overcome this lack of evidence, we studied a Magnesium-Calzium-Zinc-alloy with surface enhancement by PEO for the first time ever over a period of 18 months in a large animal model. In-vitro, surface-modified screws showed significantly improved cytocompatibility and reduction of degradation confirmed by hydrogen gas evolution testing, while in-vivo radiological and histological evaluation generally showed good biocompatibility and bioabsorption as well as significantly enhanced reduction of degradation and faster bone regeneration in the PEO-surface-modified group.

Sequentially activating macrophages M1 and M2 phenotypes by lipopolysaccharide-containing Mg-Fe layered double hydroxides coating on the Ti substrate

As cells of innate immunity, macrophages are a class of innate immune cells existing in almost all tissues and play a crucial role in bone repair. However, it remains a challenge to modulate the sequential activation of the deferent phenotypes in macrophage when designing the titanium (Ti) implants. In this study, the Mg-Fe layered double hydroxides (LDHs) was coated on Ti substrate through hydrothermal treatment. Further on lipopolysaccharide (LPS) was introduced onto the LDHs through adsorption and ions exchange. The adsorption efficiency of the coating on LPS reached 72.8% in 24 h due to the anion exchange and electrostatic interactions between the LPS and the LDH layers in deionized water. The LDHs-LPS coating released a large amount of LPS in the early stage, which induced macrophages into M1 phenotype via activating TLR-4 → MyD88 and TLR-4 → Ticam-1/2 signal pathways. Subsequently, the M1 macrophages were transformed into M2 phenotype by regulating the integrin α5β1 of cells by the nanostructures, wetting angle and Mg²⁺ of the coating. The LDHs-LPS coating endows Ti with the ability of stage immunomodulation, indicating the positive osteoimmunomodulatory property.

Harnessing electromagnetic fields to assist bone tissue engineering

Bone tissue engineering (BTE) emerged as one of the exceptional means for bone defects owing to it providing mechanical supports to guide bone tissue regeneration. Great advances have been made to facilitate the success of BTE in regenerating bone within defects. The use of externally applied fields has been regarded as an alternative strategy for BTE. Electromagnetic fields (EMFs), known as a simple and non-invasive therapy, can remotely provide electric and magnetic stimulation to cells and biomaterials, thus applying EMFs to assist BTE would be a promising strategy for bone regeneration. When combined with BTE, EMFs improve cell adhesion to the material surface by promoting protein adsorption. Additionally, EMFs have positive effects on mesenchymal stem cells and show capabilities of pro-angiogenesis and macrophage polarization manipulation. These advantages of EMFs indicate that it is perfectly suitable for representing the adjuvant treatment of BTE. We also summarize studies concerning combinations of EMFs and diverse biomaterial types. The strategy of combining EMFs and BTE receives encouraging outcomes and holds a promising future for effectively treating bone defects.

Biomimetic Hydroxyapatite Composite Coatings with a Variable Morphology Mediated by Silk Fibroin and Its Derived Peptides Enhance the Bioactivity on Titanium

Various modifications performed on titanium alloy surfaces are shown to improve osteointegration and promote the long-term success of implants. In this work, a bioactive nanostructured hydroxyapatite (HA) composite coating with a variable morphology mediated by silk fibroin (SF) and its derived peptides (Cs) was prepared. Numerous experimental techniques were used to characterize the constructed coatings in terms of morphology, roughness, hydrophilicity, protein adsorption, in vitro biomineralization, and adhesion strength. The mixed protein layer with different contents of SF and Cs exhibited different secondary structures at different temperatures, effectively mediating the electrodeposited HA layer with different characteristics and finally forming proteins/HA composite coatings with versatile morphologies. The addition of Cs significantly improved the hydrophilicity and protein adsorption capacity of the composite coatings, while the electrodeposition of the HA layer effectively enhanced the adhesion between the composite coatings and Ti surface. In the in vitro mineralization experiments, all the composite coatings exhibited excellent apatite formation ability. Moreover, the composite coatings showed excellent cell growth and proliferation activity. Osteogenic induction experiments revealed that the coating could significantly increase the expression of specific osteogenic markers, including ALP, Col-I, Runx-2, and OCN. Overall, the proposed modification of the Ti implant surface by protein/HA coatings had good potential for clinical applications in enhancing bone induction and osteogenic activity of implants.

Free or fixed state of nHAP differentially regulates hBMSC morphology and osteogenesis through the valve role of ITGA7

Nano-hydroxyapatite (nHAP) has been widely used in bone repair as an osteo-inductive and naturally-occurring material. However, the optimal applied form of nHAP and the underlying mechanisms involved remain unclear. Herein, to investigate into these, a range of corresponding models were designed, including three applied forms of nHAP (Free, Coating and 3D) that belong to two states (Free or fixed). The results indicate that when fixed nHAP was applied in the 3D form, optimal osteogenesis was induced in human bone marrow stem cells (hBMSCs) with increased bone volume via integrin α7 (ITGA7)-mediated upregulation of the PI3K-AKT signaling pathway, while contrary results were observed with free nHAP. Ectopic osteogenesis experiments in mice subcutaneous transplantation model further confirmed the different tendencies of ITGA7 expression and osteogenesis of hBMSCs in free and fixed states of nHAP. Our results revealed that the two states of nHAP play a different regulatory role in cell morphology and osteogenesis through the valve role of ITGA7, providing cues for better application of nanoparticles and a potential new molecular target in bone tissue engineering.

•

Free and fixed states of nHAP differentially regulate cell morphology and osteogenesis of hBMSCs.

•

3D fixed nHAP promoted cell volume expansion and osteogenesis, whereas the opposite results were observed in free nHAP.

•

ITGA7 plays an important role in osteogenesis under different nHAP applied forms.

Exosome-Functionalized Ti6Al4V Scaffolds Promoting Osseointegration by Modulating Endogenous Osteogenesis and Osteoimmunity

Periprosthetic bone defects are the most serious problem of revision total hip arthroplasty, which can easily lead to insufficient osteointegration between the prosthesis and host bone. Bone marrow mesenchymal stem cells (BMSCs) and a moderate inflammatory response at the prosthesis-bone interface play an important role in osteointegration. Here, we developed microarc oxide titanium implant loaded engineered exosomes (S-Exos) to promote osseointegration at the prosthesis-bone interface. First, Smurf1-shRNA was transferred into the BMSCs using a viral vector to prepare S-Exos, which were subsequently immobilized to the microarc oxide titanium implant surface with positively charged polyethyleneimine. The immobilized S-Exos could be slowly and uniformly released and subsequently phagocytosed by BMSCs and macrophages. Once the S-Exos were phagocytosed, they could simultaneously activate the BMP/Smad signaling pathway in the BMSCs and promote macrophage M2 polarization, both of which enhance osseointegration. Specifically, this S-Exos coating exhibits a dual effect of promoting osseointegration, including the osseointegration of BMSCs by activating the BMP/Smad signaling pathway and the macrophage M2 polarization promoting osseointegration. In summary, the construction of S-Exos modified microarc oxide titanium implants could provide a new method for promoting osteointegration between the prosthesis and host bone in revision total hip arthroplasty.

Titanium Implant Surface Effects on Adherent Macrophage Phenotype: A Systematic Review

Immunomodulatory biomaterials have the potential to stimulate an immune response able to promote constructive and functional tissue remodeling responses as opposed to persistent inflammation and scar tissue formation. As such, the controlled activation of macrophages and modulation of their phenotype through implant surface modification has emerged as a key therapeutic strategy.

METHODS

Online databases were searched for in vitro studies between January 1991 and June 2020 which examined the effect of titanium implant surface topography on the adherent macrophage phenotype at either the gene or protein level.

RESULTS

Thirty-nine studies were subsequently included for review. Although there was significant heterogeneity between studies, treatment of titanium surfaces increased the surface roughness or hydrophilicity, and hence increased macrophage attachment but decreased cell spreading. Physical coating of the titanium surface also tended to promote the formation of cell clusters. Titanium and titanium-zirconium alloy with a micro- or nano-scale rough topography combined with a hydrophilic surface chemistry were the most effective surfaces for inducing an anti-inflammatory phenotype in adherent macrophages, as indicated by significant changes in cytokine gene expression and or cytokine secretion profiles.

CONCLUSIONS

The published data support the hypothesis that incorporation of specific topographical and physiochemical surface modifications to titanium can modulate the phenotypic response of adherent macrophages.

Biocompatible Nano-Hydroxyapatites Regulate Macrophage Polarization

Research on regulation of the immune microenvironment based on bioactive materials is important to osteogenic regeneration. Hydroxyapatite (HAP) is believed to be a promising scaffold material for dental and orthopedic implantation due to its ideal biocompatibility and high osteoconductivity. However, any severe inflammation response can lead to loosening and fall of implantation, which cause implant failures in the clinic. Morphology modification has been widely studied to regulate the host immune environment and to further promote bone regeneration. Here, we report the preparation of nHAPs, which have uniform rod-like shape and different size (200 nm and 400 nm in length). The morphology, biocompatibility, and anti-inflammatory properties were evaluated. The results showed that the 400 nm nHAPs exhibited excellent biocompatibility and osteoimmunomodulation, which can not only induce M2-phenotype macrophages (M2) polarization to decrease the production of inflammatory cytokines, but also promote the production of osteogenic factor. The reported 400 nm nHAPs are promising for osteoimmunomodulation in bone regeneration, which is beneficial for clinical application of bone defects.

Rapid mineralization of graphene-based 3D porous scaffolds by semi-dry electrodeposition for photothermal treatment of tumor-induced bone defects

Graphene-based three-dimensional (3D) porous scaffolds have been extensively investigated in the photothermal treatment of tumor-induced bone defects due to their photothermal and osteogenic capacity. However, scaffold processing destroys conjugated graphene structure and reduces its photothermal conversion efficiency. In this study, a graphene-based 3D scaffold (GS) with intact conjugated structure was prepared by chemical vapor deposition (CVD). GS was rapidly mineralized biomimetically by a newly developed semi-dry electrochemical deposition method to form a hydroxyapatite (HA) incorporated graphene scaffold (HA-GS). The simulation of the charged particle dynamics provides a better understanding of the mechanism of semi-dry electrodeposition. This scaffold exhibits high photothermal sensitivity that generates sufficient thermal energy for photothermal therapy even under near-infrared irradiation (980 nm) with extremely low power density (0.2 W/cm²). Moreover, osteogenic activity was improved by HA-GS compared with GS. Compared with the blank GS, the HA-GS scaffold deposited with HA also showed regulation of macrophage-derived chemokine (MDC) and remodeled the immune microenvironment of the wound after photothermal therapy. In vivo experiments further verified that HA-GS can ablate osteosarcoma through a photothermal effect. These results suggest that the as-prepared HA-GS may be adopted as a promising multifunctional bone scaffold against tumor-induced bone defect. STATEMENT OF SIGNIFICANCE: The hydroxyapatite (HA) incorporated graphene scaffold (HA-GS) scaffold was prepared by semi-dry electrodeposition first time. The prepared HA-GS has a high photothermal conversion efficiency (it can rise to 48 ^oC under the 5 min irradiation of 980 nm near-infrared laser at 0.2 W/cm²). The mineralized layer prepared by semi-dry electrodeposition is not only osteoinductive, but also reduces the inflammatory response after photothermal therapy. This modulates the immune microenvironment at the bone tumor invasion site, thereby promoting defect repair.

The application of biomaterials in osteogenesis: A bibliometric and visualized analysis

Osteogenesis serves an important role in bone tissue repairing. Novel biomaterials are widely prevalent as materials for orthopedic implants due to their biocompatibility and osteogenetic ability. The purpose of this study was to comprehensively analyze hotspots and future trend of biomaterials research in osteogenesis based on bibliometric and visualized analysis. A total of 1,523 papers about biomaterials research in osteogenesis between 2000 and 2021 were included in this study. During the above 20 years, China’s leading position in the global biomaterials research in osteogenesis was obvious, and it was also the country that most frequently participates in international cooperation. Chinese Academy of Sciences was the most productive institution and the leader of research cooperation. Acta Biomaterialia and Biomaterials have published the largest number of articles in the field of biomaterials research in osteogenesis. Meanwhile, Acta Biomaterialia and Biomaterials were also the two journals with the highest total citation frequency. Wu CT, Chang J, Kaplan DL, and Xiao Y all made important contributions in the field of biomaterials research in osteogenesis. At present, there are five research hotspots in the field of biomaterials research in osteogenesis: 1) the immunomodulatory role of biomaterial-related inflammatory; 2) mechanisms of osteogenesis in biomaterials; 3) 3D printing and clinical application of biomaterials; 4) bone tissue engineering for biomaterial osteogenesis; and 5) regenerative medicine for biomaterial osteogenesis. The results of this study showed that mechanisms of osteogenesis in biomaterials, bone tissue engineering for biomaterial osteogenesis, and regenerative medicine for biomaterial osteogenesis will remain research hotspots in the future. International cooperation was also expected to expand and deepen the field of biomaterials research in osteogenesis.

Advances in the superhydrophilicity-modified titanium surfaces with antibacterial and pro-osteogenesis properties: A review

In recent years, the rate of implant failure has been increasing. Microbial infection was the primary cause, and the main stages included bacterial adhesion, biofilm formation, and severe inhibition of implant osseointegration. Various biomaterials and their preparation methods have emerged to produce specific implants with antimicrobial or bactericidal properties to reduce implant infection caused by bacterial adhesion and effectively promote bone and implant integration. In this study, we reviewed the research progress of bone integration promotion and antibacterial action of superhydrophilic surfaces based on titanium alloys. First, the adverse reactions caused by bacterial adhesion to the implant surface, including infection and bone integration deficiency, are briefly introduced. Several commonly used antibacterial methods of titanium alloys are introduced. Secondly, we discuss the antibacterial properties of superhydrophilic surfaces based on ultraviolet photo-functionalization and plasma treatment, in contrast to the antibacterial principle of superhydrophobic surface morphology. Thirdly, the osteogenic effects of superhydrophilic surfaces are described, according to the processes of osseointegration: osteogenic immunity, angiogenesis, and osteogenic related cells. Finally, we discuss the challenges and prospects for the development of this superhydrophilic surface in clinical applications, as well as the prominent strategies and directions for future research.

Osteoimmunomodulation role of exosomes derived from immune cells on osseointegration

Despite the high success rate of biomedical implants adopted clinically, implant failures caused by aseptic loosening still raise the risk of secondary surgery and a substantial economic burden to patients. Improving the stable combination between the implant and the host bone tissue, achieving fast and high-quality osseointegration can effectively reduce the probability of aseptic loosening. Accumulating studies have shown that the osteoimmunomodulation mediated by immune cells mainly dominated by macrophages plays a pivotal role in osseointegration by releasing active factors to improve the inflammatory microenvironment. However, the mechanism by which osteoimmunomodulation mediates osseointegration remains unclear. Recent studies have revealed that exosomes released by macrophages play a central role in mediating osteoimmunomodulation. The exosomes can be internalized by various cells participating in de novo bone formation, such as endothelial cells and osteoblasts, to intervene in the osseointegration robustly. Therefore, macrophage-derived exosomes with multifunctionality are expected to significantly improve the osseointegration microenvironment, which is promising in reducing the occurrence of aseptic loosening. Based on this, this review summarizes recent studies on the effects of exosomes derived from the immune cells on osseointegration, aiming to provide a theoretical foundation for improving the clinical success rate of biomedical implants and achieving high-quality and high-efficiency osseointegration.

Targeting regulation of stem cell exosomes: Exploring novel strategies for aseptic loosening of joint prosthesis

Periprosthetic osteolysis is a major long-term complication of total joint replacement. A series of biological reactions caused by the interaction of wear particles at the prosthesis bone interface and surrounding bone tissue cells after artificial joint replacement are vital reasons for aseptic loosening. Disorder of bone metabolism and aseptic inflammation induced by wear particles are involved in the occurrence and development of aseptic loosening of the prosthesis. Promoting osteogenesis and angiogenesis and mediating osteoclasts and inflammation may be beneficial in preventing the aseptic loosening of the prosthesis. Current research about the prevention and treatment of aseptic loosening of the prosthesis focuses on drug, gene, and stem cell therapy and has not yet achieved satisfactory clinical efficacy or has not been used in clinical practice. Exosomes are a kind of typical extracellular vehicle. In recent years, stem cell exosomes (Exos) have been widely used to regulate bone metabolism, block inflammation, and have broad application prospects in tissue repair and cell therapy.

Nervous System-Driven Osseointegration

Implants are essential therapeutic tools for treating bone fractures and joint replacements. Despite the in-depth study of osseointegration for more than fifty years, poor osseointegration caused by aseptic loosening remains one of the leading causes of late implant failures. Osseointegration is a highly sophisticated and spatiotemporal process in vivo involving the immune response, angiogenesis, and osteogenesis. It has been unraveled that the nervous system plays a pivotal role in skeletal health via manipulating neurotrophins, neuropeptides, and nerve cells. Herein, the research related to nervous system-driven osseointegration was systematically analyzed and reviewed, aiming to demonstrate the prominent role of neuromodulation in osseointegration. Additionally, it is indicated that the implant design considering the role of neuromodulation might be a promising way to prevent aseptic loosening.

Biocompatible silane adhesion layer on titanium implants improves angiogenesis and osteogenesis

Silane adhesion layer strategy has been widely used to covalently graft biomolecules to the titanium implant surface, thereby conferring the implant bioactivity to ameliorate osseointegration. However, few researchers pay attention to the effects of silanization parameters on biocompatibility and biofunctionality of the silane adhesion layers. Accordingly, the present study successfully fabricated the silane adhesion layers with different thickness, intactness, and surface morphologies by introducing 3-aminopropyltriethoxysilane on the alkali-treated titanium surface in time-varied processing of silanization. The regulatory effects of the silane adhesion layers on angiogenesis and osteogenesis were assessed in vitro. Results showed that the prolonged silanization processing time increased the thickness and intactness of the silane adhesion layer and significantly improved its biocompatibility. Notably, the silane adhesion layer prepared after 12 h of silanization exhibited a brain-like surface morphology and benefited the adhesion and proliferation of endothelial cells (ECs) and osteoblasts (OBs). Moreover, the layer promoted angiogenesis via stimulating vascular endothelial growth factor (VEGF) secretion and nitric oxide (NO) production of ECs. Simultaneously, it improved osteogenesis by enhancing alkaline phosphatase (ALP) activity, collagen secretion, and extracellular matrix mineralization of OBs. This work systematically investigated the biocompatibility and biofunctionality of the modified silane adhesion layers, thus providing valuable references for their application in covalently grafting biomolecules on the titanium implant surface.

Resveratrol promotes osteogenesis and angiogenesis through mediating immunology of senescent macrophages

Orthopedic implants have been used clinically to restore the functions of the compromised bone tissues, but there is still a relatively high risk of failure for elderly people. A critical reason is pro-inflammatory immune microenvironment created by senescent macrophages with homeostasis imbalance impairs osteogenesis and angiogenesis, two major processes involved in implant osseointegration. The present work proposes to use resveratrol as an autophagy inducing agent to upregulate the autophagy level of senescent macrophages to restore homeostasis, consequently generating a favorable immune microenvironment. The results show 0.1-1 µM of resveratrol can induce autophagy of senescent macrophages, promote cell viability and proliferation, reduce intracellular reactive oxygen species (ROS) level, and polarize the cells to pro-healing M2 phenotype. The immune microenvironment created by senescent macrophages upon resveratrol stimulation can promote osteogenesis and angiogenesis, as manifested by upregulated proliferation, alkaline phosphatase activity, type I collagen secretion, and extracellular matrix mineralization of senescent osteoblasts as well as nitric oxide production, migration, and in vitro angiogenesis of senescent endothelial cells. In addition, resveratrol-loaded silk fibroin coatings can be fabricated on titanium surface through electrophoretic co-deposition and the coatings show beneficial effects on the functions of senescent macrophages. Our results suggest resveratrol can be used as surface additive of titanium implants to promote osseointegration of elderly people though regulating immunology of senescent macrophages.

Cell osteogenic bioactivity mediated precisely by varying scaled micro-pits on ordered micro/nano hierarchical structures of titanium

Hierarchical surface structures with micro–nano scale play a crucial role in regulation of cell proliferation and osteogenic differentiation. It has been proven that cells are extremely sensitive to the nanoscaled structure and show multifarious phenotypes. Though a vital function of microstructure on osseointegration has been confirmed, the cell performances response to different microscaled structure is needed to be further dissected and in depth understood. In this work, the ordered micro–nano hierarchical structures with varying micro-scaled pits were precisely fabricated on titanium successfully by the combination of electrochemical, chemical etching and anodization as well. In vitro systematical assessments indicated that the micro–nano multilevel structures on titanium exhibited excellent cells adhesion and spreading ability, as well as steerable proliferation and osteogenic differentiation behaviors. It is shown that smaller micro-pits and lower roughness of the hierarchical structures enabled faster cell propagation. Despite cell growth was delayed on micro–nano titanium with relatively larger cell-match-size micro-pits and roughness, osteogenic-specific genes were significantly elevated. Furthermore, the alkaline phosphatase activity, collagen secretion and extracellular matrix mineralization of MC3T3-E1 on multi-scaled titanium were suppressed by a large margin after adding IWP-2 (an inhibitor of Wnt/β-catenin signal pathway), indicating this pathway played a crucial part in cell osteogenic differentiation modulated by micro–nano structures.

Versatile-in-All-Trades: Multifunctional Boron-Doped Calcium-Deficient Hydroxyapatite Directs Immunomodulation and Regeneration

Osseointegration of implants depends on several intertwined factors: osteogenesis, angiogenesis, and immunomodulation. Lately, novel reinforcements allowing faster bonding with osseous tissue have been explored intensively. In this study, we hypothesized the use of boron as a major multifunctional ion to confer versatility to calcium-deficient hydroxyapatite (cHA) synthesized by a wet precipitation/microwave reflux method. By synthesis of boron-doped calcium-deficient hydroxyapatite (BcHA), we expected to obtain an osteoimmunomodulatory and regenerative nanoreinforcement. BcHA was found to possess a pure HA phase, a greater surface area (66.41 m²/g, p = 0.028), and cumulative concentrations of Ca (207.87 ± 6.90 mg/mL, p < 0.001) and B (112.70 ± 11.79 mg/mL, p < 0.001) released in comparison to cHA. Osteogenic potential of BcHA was analyzed using human fetal osteoblasts. BcHA resulted in a drastic increase in the ALP activity (1.11 ± 0.11 mmol/gDNA·min, p < 0.001), biomineralization rate, and osteogenic gene expressions compared to cHA. BcHA angiogenic potential was investigated using human umbilical cord vein endothelial cells. Significantly, the highest VEGF-A release (1111.14 ± 87.82 in 4 h, p = 0.009) and angiogenic gene expressions were obtained for BcHA-treated samples. These samples were also observed to induce a more prominent and highly branched tube network. Finally, inflammatory and inflammasome responses toward BcHA were elucidated using human monocyte-derived macrophages differentiated from THP-1s. BcHA exhibited lower CAS-1 release (50.18 ± 5.52 μg/g_DNA μg/gDNA) and higher IL-10 release (126.97 ± 15.05 μg/g_DNA) than cHA. In addition, BcHA treatment led to increased expression of regenerative genes such as VEGF-A, RANKL, and BMP-2. In vitro results demonstrated that BcHA has tremendous osteogenic, angiogenic, and immunomodulatory potential to be employed as a "versatile-in-all-trades" modality in various bone tissue engineering applications.

Potential bioactive coating system for high-performance absorbable magnesium bone implants

Magnesium alloys are considered the most suitable absorbable metals for bone fracture fixation implants. The main challenge in absorbable magnesium alloys is their high corrosion/degradation rate that needs to be controlled. Various coatings have been applied to magnesium alloys to slow down their corrosion rates to match their corrosion rate to the regeneration rate of the bone fracture. In this review, a bioactive coating is proposed to slow down the corrosion rate of magnesium alloys and accelerate the bone fracture healing process. The main aim of the bioactive coatings is to enhance the direct attachment of living tissues and thereby facilitate osteoconduction. Hydroxyapatite, collagen type I, recombinant human bone morphogenetic proteins 2, simvastatin, zoledronate, and strontium are six bioactive agents that show high potential for developing a bioactive coating system for high-performance absorbable magnesium bone implants. In addition to coating, the substrate itself can be made bioactive by alloying magnesium with calcium, zinc, copper, and manganese that were found to promote bone regeneration.

•

Bioactive-coated magnesium implant could accelerate bone fracture healing time to match with magnesium degradation.

•

Hydroxyapatite, collagen type I, recombinant human bone morphogenetic proteins 2, simvastatin, zoledronate, and strontium are high potential bioactive coating materials.

•

The incorporation of Ca, Zn, Cu, Sr, and Mn in Mg base-metal could further enhance bone formation.

3D-printed bioactive ceramic scaffolds with biomimetic micro/nano-HAp surfaces mediated cell fate and promoted bone augmentation of the bone–implant interface in vivo

Calcium phosphate bio-ceramics are osteo-conductive, but it remains a challenge to promote the induction of bone augmentation and capillary formation. The surface micro/nano-topography of materials can be recognized by cells and then the cell fate are mediated. Traditional regulation methods of carving surface structures on bio-ceramics employ mineral reagents and organic additives, which might introduce impurity phases and affect the biological results. In a previous study, a facile and novel method was utilized with ultrapure water as the unique reagent for hydrothermal treatment, and a uniform hydroxyapatite (HAp) surface layer was constructed on composite ceramics (β-TCP/CaSiO₃) in situ. Further combined with 3D printing technology, biomimetic hierarchical structure scaffolds were fabricated with interconnected porous composite ceramic scaffolds as the architecture and micro/nano-rod hybrid HAp as the surface layer. The obtained HAp surface layer favoured cell adhesion, alleviated the cytotoxicity of precursor scaffolds, and upregulated the cellular differentiation of mBMSCs and gene expression of HUVECs in vitro. In vivo studies showed that capillary formation, bone augmentation and new bone matrix formation were upregulated after the HAp surface layer was obtained, and the results confirmed that the fabricated biomimetic hierarchical structure scaffold could be an effective candidate for bone regeneration.

•

Simple and practical process to construct surface structure layer in situ with little impurities.

•

Combined with the 3D printing technology to fabricate architecture of the pre-treated matrix.

•

Study the angiogenesis and osteogenesis (for mesenchymal stem cells) separately.

•

Improving tissue growth in vivo: capillary formation, bone-augmentation and new bone matrix formation.

Ipriflavone suppresses NLRP3 inflammasome activation in host response to biomaterials and promotes early bone healing

AIM

Emerging studies have shown that immune response to biomaterial implants plays a central role in bone healing. Ipriflavone is clinically used for osteoporosis. However, the mechanism of ipriflavone in immune response to implants in early stages of osseointegration remains unclear. In this study, we aimed to investigate the potential role of ipriflavone in early bone healing process and uncover the underlying mechanism.

MATERIALS AND METHODS

We carried out histological examination as well as analysis of proinflammatory cytokines and NLRP3 inflammasome activation in a tibial implantation mouse model with intra-peritoneal injection of ipriflavone. In addition, we explored the mechanism of ipriflavone in the regulation of NLRP3 inflammasome activation in macrophages.

RESULTS

In vivo, ipriflavone ameliorated host inflammatory response related to NLRP3 inflammasome activation at implantation sites, characterized by reductions of inflammatory cell infiltration and proinflammatory cytokine interleukin-1β levels. Ipriflavone treatment also showed beneficial effects on early osseointegration. Further investigations of the molecular mechanism showed that the suppression of NLRP3 inflammasome acts upstream of NLRP3 oligomerization through abrogating the production of reactive oxygen species.

CONCLUSIONS

These results revealed an anti-inflammatory role of ipriflavone in NLRP3 inflammasome activation through improving mitochondrial function. This study provides a new strategy for the development of immune-regulated biomaterials and treatment options for NLRP3-related diseases.

Inhibition of Inflammatory Response and Promotion of Osteogenic Activity of Zinc-Doped Micro-Arc Titanium Oxide Coatings

An early and sustained immune response can lead to chronic inflammation after the implant is placed in the body. The implantable materials with immunomodulatory effects can reduce the body's immune response and promote the formation of ideal osseointegration between the implants and bone tissue. In this study, zinc-coated titanium micro-arc oxide coating was prepared on titanium surface by micro-arc oxidation. The physical properties, anti-inflammation, and osteogenesis of the material were evaluated. We have physically characterized the surface structure of the coatings by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and atomic force microscopy (AFM) and detected the release of Zn²⁺ from the coating surface by inductively coupled optical plasma emission spectrometry (ICP-OES). The BMSCs were inoculated on the surface of the coating, and the biocompatibility of the coating was evaluated by CCK-8 analysis and living and dead cell staining. The osteogenic effect of the layer on BMSCs was evaluated by alkaline phosphatase (ALP) assays, osteocalcin (OCN) immunofluorescence, and quantitative polymerase chain reaction (q-PCR). The survival status of RAW264.7 on the coating surface and the mRNA expression of the associated proinflammatory markers, tumor necrosis factor-α (TNF-α), cluster of differentiation 86 (CD86), and inducible nitric oxide (INOS) were detected by CCK-8 analysis and q-PCR. In parallel, the cell counting kit-8 (CCK-8) analysis and q-PCR screened and evaluated the effective concentration of Zn²⁺ anti-inflammatory in vitro. The results show that the coating has good physical characterization, and Zn is uniformly bound to the surface of titanium and shows stable release and good biocompatibility to BMSCs, downregulating the expression of inflammation-related genes promoting the bone formation of BMSCs. We have successfully prepared zinc-coated micro-arc titanium oxide coating on the titanium surface, which has good osteogenesis and great anti-inflammatory potential and provides a new way for osseointegration in the implant.

Exosomes derived from magnesium ion-stimulated macrophages inhibit angiogenesis

Angiogenesis, an essential prerequisite to osteogenesis in bone repair and regeneration, can be mediated by immunoregulation of macrophages. Magnesium and its alloys are promising biodegradable bone implant materials and can affect immunoregulation of macrophages by the degradation products (magnesium ions. Nevertheless, the mechanism of macrophage-derived exosomes stimulated by Mg ions in immunoregulation is still not well understood. Herein, 10-50 mM magnesium ions are shown to inhibit the macrophage viability and proliferation in a dose-dependent manner, but a high concentration results in macrophage apoptosis. The exosomes secreted by macrophages from magnesium ion stimulation inhibit angiogenesis of endothelial cells, as manifested by the suppressed cell viability, proliferation, migration, and tube formation, which arise at least partially from exosome-mediated downregulation of endothelial nitric oxide and the vascular endothelial growth factor. The findings reported in this paper suggest that the bio-functionality of biodegradable magnesium alloys must be considered from the perspective of immunoregulation of macrophage-derived exosomes. Our results also suggest potential cancer therapy by inhibiting tumor-associated angiogenesis.

Differential Nanoscale Topography Dedicates Osteocyte-Manipulated Osteogenesis via Regulation of the TGF-β Signaling Pathway

Osteocytes function as the master orchestrator of bone remodeling activity in the telophase of osseointegration. However, most contemporary studies focus on the manipulation of osteoblast and/or osteoclast functionality via implant surface engineering, which neglects the pivotal role of osteocytes in de novo bone formation. It is confirmative that osteocyte processes extend directly to the implant surface, but whether the surface physicochemical properties can affect the functionality of osteocytes and determine the fate of the osseointegration in the final remodeling stage remains to be determined. Titania nanotube arrays (NTAs) with distinct diameters were fabricated to investigate the relationship between the nanoscale topography and the functionality of osteocytes. In vitro results pinpointed that NTA with a diameter of 15 nm (NTA-15) significantly promote osteogenesis of osteocytes via the enhancement of spreading, proliferation, and mineralization. The osteocyte transcriptome of each group further revealed that the TGF-β signaling pathway plays a pivotal role in osteocyte-mediated osteogenesis. The in vivo study definitely mirrored the aforementioned results, that NTA-15 significantly promotes bone formation around the implant. Consequently, nanoscaled topography-induced osteocyte functionality is important in late osseointegration. This suggests that surface designs targeting osteocytes may, therefore, be a potential approach to solving the aseptic loosening of the implant, and thus strengthen osseointegration.

Regulating Macrophage Polarization in High Glucose Microenvironment Using Lithium-Modified Bioglass-Hydrogel for Diabetic Bone Regeneration

Diabetes mellitus is a chronic metabolic disease with a proinflammatory microenvironment, causing poor vascularization and bone regeneration. Due to the lack of effective therapy and one-sided focus on the direct angiogenic properties of biomaterials and osteogenesis stimulation, the treatment of diabetic bone defect remains challenging and complex. In this study, using gelatin methacryloyl (GelMA) as a template, a lithium (Li) -modified bioglass-hydrogel for diabetic bone regeneration is developed. It exhibits a sustained ion release for better bone regeneration under diabetic microenvironment. The hydrogel is shown to be mechanically adaptable to the complex shape of the defect. In vitro, Li-modified bioglass-hydrogel promoted cell proliferation, direct osteogenesis, and regulated macrophages in high glucose (HG) microenvironment, with the secretion of bone morphogenetic protein-2 and vascular endothelial growth factor to stimulate osteogenesis and neovascularization indirectly. In vivo, composite hydrogels containing GelMA and Li-MBG (GM/M-Li) release Li ions to relieve inflammation, providing an anti-inflammatory microenvironment for osteogenesis and angiogenesis. Applying Li-modified bioglass-hydrogel, significantly enhances bone regeneration in a diabetic rat bone defect. Together, both remarkable in vitro and in vivo outcomes in this study present an opportunity for diabetic bone regeneration on the basis of HG microenvironment.

Simultaneous incorporation of gallium oxide and tantalum microparticles into micro-arc oxidation coating of titanium possessing antibacterial effect and stimulating cellular response

Orthopedic implants with both osteogenesis and antibacterial functions are particularly promising for bone repair and substitutes. In this study, a micro-arc oxidation (MAO) coating containing titanium dioxide (TiO₂), gallium oxide (Ga₂O₃) and tantalum oxide (Ta₂O₅) on the titanium surface (MGT) was fabricated by dispersing Ga₂O₃ and Ta microparticles in the electrolyte. The results showed that the simultaneous incorporation of Ga₂O₃ and Ta microparticles into the MAO coating resulted in optimized surface performance (e.g., micro-topography, roughness, wettability, surface energy, and protein absorption) of MGT compared with pure titanium (pTi). In addition, MGT exhibited outstanding corrosion resistance owing to the presence of both Ga₂O₃ and Ta microparticles, which exhibit excellent corrosion resistance and their microparticles were incorporated into the micropores of the coating. Moreover, MGT with good cytocompatibility and optimized surface resulted in improved cellular responses (e.g., proliferation and osteogenic differentiation) of rat bone mesenchymal stem cells, which was attributed to Ta microparticles with outstanding osteogenic bioactivity. Furthermore, the excellent antibacterial effect of MGT was attributed to the slow release of Ga³⁺ from the coating. Thus, the simultaneous incorporation of Ga₂O₃ and Ta microparticles into the MAO coating of MGT exhibited excellent cytocompatibility, osteogenic bioactivity, antibacterial functions, and corrosion resistance, suggesting that MGT possesses great potential for bone repair applications.