Physicochemical characterisation of the ubiquitous bracken fern as useful biomaterial for preconcentration of heavy metals

Removal of mercury(II) ions in aqueous solution using the peel biomass of Pachira aquatica Aubl: kinetics and adsorption equilibrium studies

Mercury is a highly toxic substance that is a health hazard to humans. This study aims to investigate powders obtained from the peel of the fruit of Pachira aquatica Aubl, in its in natura and/or acidified form, as an adsorbent for the removal of mercury ions in aqueous solution. The materials were characterized by Fourier transform infrared spectroscopy and thermogravimetric analysis. The infrared spectra showed bands corresponding to the axial deformation of carbonyls from carboxylic acids, the most important functional group responsible for fixing the metal species to the adsorbent material. The thermograms displayed mass losses related to the decomposition of three major components, i.e., hemicellulose, cellulose, and lignin. The adsorption process was evaluated using cold-vapor atomic fluorescence spectrometry (CV AFS) and cold-vapor atomic absorption spectrometry (CV AAS). Three isotherm models were employed. The adsorption isotherm model, Langmuir-Freundlich, best represented the adsorption process, and the maximum adsorption capacity was predicted to be 0.71 and 0.58 mg g(-1) at 25 °C in nature and acidified, respectively. Adsorption efficiencies were further tested on real aqueous wastewater samples, and removal of Hg(II) was recorded as 69.6 % for biomass acidified and 76.3 % for biomass in nature. Results obtained from sorption experiments on real aqueous wastewater samples revealed that recovery of the target metal ions was very satisfactory. The pseudo-second-order model showed the best correlation to the experimental data. The current findings showed that the investigated materials are potential adsorbents for mercury(II) ion removal in aqueous solution, with acidified P. aquatica Aubl being the most efficient adsorbent.

Enhanced selective metal adsorption on optimised agroforestry waste mixtures

The aim of this work is to ascertain the potentials of different agroforestry wastes to be used as biosorbents in the removal of a mixture of heavy metals. Fern (FE), rice husk (RI) and oak leaves (OA) presented the best removal percentages for Cu(II) and Ni(II), Mn(II) and Zn(II) and Cr(VI), respectively. The performance of a mixture of these three biosorbents was evaluated, and an improvement of 10% in the overall removal was obtained (19.25mg/g). The optimum mixture proportions were determined using simplex-centroid mixture design method (FE:OA:RI=50:13.7:36.3). The adsorption kinetics and isotherms of the optimised mixture were fit by the pseudo-first order kinetic model and Langmuir isotherm. The adsorption mechanism was studied, and the effects of the carboxylic, hydroxyl and phenolic groups on metal-biomass binding were demonstrated. Finally, the recoveries of the metals using biomass were investigated, and cationic metal recoveries of 100% were achieved when acidic solutions were used.

Experimental evidences for a new model in the description of the adsorption-coupled reduction of Cr(VI) by protonated banana skin

This work reports experimental evidences, not previously considered, to evaluate the Cr(VI) removal by protonated banana skin biomass. Variations in the number of hydroxyl groups, quantified by potentiometric titrations, and CO2 evolution during experiments, were attributed mainly to the oxidation of hydroxylic entities present in the studied material. The results indicate that these groups together with the carboxylic moieties are the main functionalities involved on the adsorption-coupled reduction process. The column experiment carried out provides a new approach to obtain the maximum reduction capacity of the material (3.72 mmol g(-1)). Moreover, we hereby propose a model that reports the first evidence for the instant bound of Cr(III) species to the material used, formed after the reduction of Cr(VI) present in solution. The removal process was quantified carrying out experiments under various pHs, biomass doses and Cr(VI) concentrations, and the mechanism underlying chromium removal was identified.

Adsorptive behaviour of mercury on algal biomass: competition with divalent cations and organic compounds

Biosorption processes constitute an effective technique for mercury elimination. Sorption properties of native and acid-treated Sargassum muticum have been studied. Effect of pH, initial mercury concentration and contact time studies provided fundamental information about the sorption process. This information was used as the reference values to analyse mercury sorption under competition conditions. Saline effect has shown little influence in sorption, when only electrostatic modifications took place upon salt addition. On the contrary, if mercury speciation dramatically changed owing to the addition of an electrolyte, such as in the case of chloride salt, very large modifications in mercury sorption were observed. Competition with other divalent cations or organic compounds has shown little or none effect on mercury, indicating that a different mechanism is taking place during the removal of these pollutants. Finally, continuous flow experiments have clearly shown that a reduction process is also taking place during mercury removal. This fact is not obvious to elucidate under batch sorption experiments. Scanning Electron Microscopy analysis of the surface of the materials show deposits of mercury(I) and metallic mercury which is indicative of the reduction process proposed.

A dynamic proof of mercury elimination from solution through a combined sorption-reduction process

Physico-chemical factors affecting mercury elimination from solution using fern as sorbent have been analysed. It was demonstrated that interaction of mercury with this biomass follows two processes, adsorption by the functional groups in the biopolymers of the cell wall and reduction by easily oxidized compounds of the biomass. Batch experiments have been done to analyse the effect of pH, ionic strength of the media or competition with other metals. Ionic strength did not show a significant influence in the process, but mercury speciation with the formation of negatively charge complexes represented an important drawback in metal elimination. Continuous flow conditions were also analysed since many industrial applications will require them. These studies allowed distinguishing the two processes: mercury sorption was observed but also reduction of this metal occurs. Reduction to mercury (I) and metallic mercury has been confirmed by scanning electron microscopy analysis of the column filling after the continuous flow experiments.