Degradation of dimethyl-sulfoxide-containing wastewater using airlift bioreactor by polyvinyl-alcohol-immobilized cell beads

Genomic Island-Mediated Horizontal Transfer of the Erythromycin Resistance Gene erm(X) among Bifidobacteria

Antibiotic resistance is a serious medical issue driven by antibiotic misuse. Bifidobacteria may serve as a reservoir for antibiotic resistance genes (ARGs) that have the potential risk of transfer to pathogens. The erythromycin resistance gene erm(X) is an ARG with high abundance in bifidobacteria, especially in Bifidobacterium longum species. However, the characteristics of the spread and integration of the gene erm(X) into the bifidobacteria genome are poorly understood. In this study, 10 tetW-positive bifidobacterial strains and 1 erm(X)-positive bifidobacterial strain were used to investigate the transfer of ARGs. Conjugation assays found that the erm(X) gene could transfer to five other bifidobacterial strains. Dimethyl sulfoxide (DMSO) and vorinostat significantly promoted the transfer of the erm(X) from strain Bifidobacterium catenulatum subsp. kashiwanohense DSM 21854 to Bifidobacterium longum subsp. suis DSM 20211. Whole-genome sequencing and comparative genomic analysis revealed that the erm(X) gene was located on the genomic island BKGI1 and that BKGI1 was conjugally mobile and transferable. To our knowledge, this is the first report that a genomic island-mediated gene erm(X) transfer in bifidobacteria. Additionally, BKGI1 is very unstable in B. catenulatum subsp. kashiwanohense DSM 21854 and transconjugant D2TC and is highly excisable and has an intermediate circular formation. In silico analysis showed that the BKGI1 homologs were also present in other bifidobacterial strains and were especially abundant in B. longum strains. Thus, our results confirmed that genomic island BKGI1 was one of the vehicles for erm(X) spread. These findings suggest that genomic islands play an important role in the dissemination of the gene erm(X) among Bifidobacterium species. IMPORTANCE Bifidobacteria are a very important group of gut microbiota, and the presence of these bacteria has many beneficial effects for the host. Thus, bifidobacteria have attracted growing interest owing to their potential probiotic properties. Bifidobacteria have been widely exploited by the food industry as probiotic microorganisms, and some species have a long history of safe use in food and feed production. However, the presence of antibiotic resistance raises the risk of its application. In this study, we analyzed the transfer of the erythromycin resistance gene erm(X) and revealed that the molecular mechanism behind the spread of the gene erm(X) was mediated by genomic island BKGI1. To the best of our knowledge this is the first report to describe the transfer of the gene erm(X) via genomic islands among bifidobacteria. This may be an important way to disseminate the gene erm(X) among bifidobacteria.

Effective separation of water-DMSO through solvent resistant membrane distillation (SR-MD)

The treatment of organic waste or wastewater with high organic solvent content has been challenging in industries as it cannot be done effectively using conventional wastewater treatment technologies such as biodegradation and advanced oxidation process. Solvent resistant membrane distillation (SR-MD) was proposed as an energy-efficient alternative to treat these waste streams but its application is hampered by the lack of solvent-resistant membranes, and there is a research gap in studying the feeds with water-solvent mixtures. In this work, ceramic tubular membranes with different pore sizes and structures were molecularly grafted with 1H,1H,2H,2H-perfluorodecyltriethoxysilane to obtain hydrophobic ceramic membranes for SR-MD. The modified membranes exhibited excellent hydrophobicity and solvent resistant properties, and they were tested for SR-MD performance with a wide range of dimethyl sulfoxide (DMSO) feed concentrations, from 3.5 to 85 wt%. The membranes exhibited a high DMSO rejection of >98% and the separation factor of >170, with permeation flux >4.4 kg m^-2 h^-1 when the DMSO concentration in feed was below 65 wt%. The separation performance was found strongly dependent on the evaporation step and the vapour-liquid equilibrium near the interface. The DMSO rejection was also comparable to pervaporation while the permeation flux was much higher at the feed concentration of 50 wt%. This study establishes the strategy of using SR-MD as a promising membrane process in treating complex industrial wastes with high organic solvent content.

Biological treatment of DMSO-containing wastewater from semiconductor industry under aerobic and methanogenic conditions

This study evaluated biological treatment of dimethyl sulfoxide (DMSO)-containing wastewater from semiconductor industry under aerobic and anaerobic conditions. DMSO concentration as higher as 1.5 g/L did not inhibit DMSO degradation efficiency in aerobic membrane bioreactor (MBR), while specific DMSO degradation rate at different initial DMSO-to-biomass (S₀/X₀) ratios from batch tests seemed to follow the Haldane-type kinetics. According to the microbial community analysis, Proteobacteria decreased from 88.2% to 26% as influent DMSO concentration increased, while Bacteroidetes, Parcubacteria, Saccharibacteria increased. Within the Bacteroidetes class, Flavobacterium and Laribacter genus significantly increased from less than 0.05%-26.8% and 13.4%, respectively, which might both be related to the DMS degradation. Hyphomicrobium and Thiobacillus, known as aerobic DMSO and DMS degraders, instead, decreased at higher DMSO conditions. Under methanogenic conditions, batch results implied DMSO concentrations higher than 3 g/L could be inhibitory, while DMSO and COD removal achieved 100% and 93%, respectively, using a pilot-scale anaerobic fluidized bed membrane bioreactor (AFMBR) with influent DMSO below 1.5 g/L. Results of terminal restriction fragment length polymorphism (TRFLP) analysis targeting on mcrA functional gene revealed that Methanomethylovorans sp. was dominant in AFMBR after 54 days of operation, indicating its importance on degrading DMS and mathanethiol (MT).

Cytocompatible Fabrication of Yeast Cells/Fabrics Composite Sheet for Bioethanol Production

Entrapment of living cells into a polymer network has significant potential in various fields such as biomass conversion and tissue engineering. A crucial challenge for this strategy is to provide a mild enough condition to preserve cell viability. Here, a facile and cytocompatible method to entrap living yeast cells into a poly(ethylene glycol) (PEG) network grafting from polypropylene nonwoven fabrics via visible-light-induced surface living graft crosslinking polymerization is reported. Due to the mild reaction conditions and excellent biocompatibility of PEG, the immobilized yeast cells could maintain their viability and proliferate well. The obtained composite sheet has excellent long-term stability and shows no significant efficiency loss after 25 cycles of repeated batch bioethanol fermentation. The immobilized yeast cells exhibit 18.0% higher bioethanol fermentation efficiency than free cells. This strategy for immobilization of living cells with high viability has significant potential application.

Analysis of the Metabolites of Indole Degraded by an Isolated Acinetobacter pittii L1

Indole and its derivatives are typical nitrogen heterocyclic compounds and have been of immense concern since they are known for the risk of their toxic, recalcitrant, and carcinogenic properties for human and ecological environment. In this study, a Gram-negative bacterial strain of eliminating indole was isolated from a coking wastewater. The strain was confirmed as Acinetobacter pittii L1 based on the physiological and biochemical characterization and 16S ribosomal DNA (rDNA) gene sequence homology. 400 mg/L indole could be completely removed within 48 h by the strain on the optimum condition of 37°C, pH 7.4, and 150 rpm. The organic nitrogen was converted to NH₃-N and then to NO₃^- and the organic carbon was partially transferred to CO₂ during the indole biodegradation. The metabolic pathways were proposed to explain the indole degradation based on the liquid chromatography tandem mass spectrometry (LC-MS/MS) analysis of indigo, 4-(3-Hydroxy-1H-pyrrol-2-yl)-2-oxo-but-3-enoic acid, and isatin. The toxicity of the biodegradation products was evaluated using the Microtox test, which revealed that the metabolites were more toxic than indole. Our research holds promise for the potential application of Acinetobacter pittii L1 for NHCs degradation, production of indigoids, and soil remediation as well as treatment of indole containing wastewater.

Degradation of dimethyl sulfoxide through fluidized-bed Fenton process

Dimethyl sulfoxide (DMSO), one of the most widely used solvent, was subjected to fluidized-bed Fenton oxidation in this study. Fenton oxidation is considered one of the cheapest advanced oxidation processes due to high availability of Fenton's reagents Fe(2+) and H2O2, wherein, Fe(2+) catalyzes hydroxyl radical production from H2O2. Fluidized-bed Fenton process is a modified approach which is also used to address the production of large amount of iron oxide sludge in conventional Fenton process. Parametric study is included in this research using initial conditions of pH 2-7, 0.5-7.25 mM Fe(2+), 5-87.5mM H2O2, and 5-50mM DMSO. Fluidized-bed Fenton oxidation of 5mM DMSO using 68.97 g/L SiO2 carrier at initial conditions of pH 3, 5mM Fe(2+), and 32.5mM H2O2 resulted to 95.22% DMSO degradation, 34.38% TOC removal and 0.304 mM sulfate/mM DMSO0 production in 2h. The study shows that the intermediate product which was most difficult to oxidize and contributed most to the residual TOC was methanesulfonate.

Factors affecting degradation of dimethyl sulfoxide (DMSO) by fluidized-bed Fenton process

In this study, the target compound is dimethyl sulfoxide (DMSO), which is used as a photoresist stripping solvent in the semiconductor and thin-film transistor liquid crystal display (TFT-LCD) manufacturing processes. The effects of the operating parameters (pH, Fe(2+) and H2O2 concentrations) on the degradation of DMSO in the fluidized-bed Fenton process were examined. This study used the Box-Behnken design (BBD) to investigate the optimum conditions of DMSO degradation. The highest DMSO removal was 98 % for pH 3, when the H2O2 to Fe(2+) molar ratio was 12. At pH 2 and 4, the highest DMSO removal was 82 %, when the H2O2 to Fe(2+) molar ratio was 6.5. The correlation of DMSO removal showed that the effect of the parameters on DMSO removal followed the order Fe(2+) > H2O2 > pH. From the BBD prediction, the optimum conditions were pH 3, 5 mM of Fe(2+), and 60 mM of H2O2. The difference between the experimental value (98 %) and the predicted value (96 %) was not significant. The removal efficiencies of DMSO, chemical oxygen demand (COD), total organic carbon (TOC), and iron in the fluidized-bed Fenton process were higher than those in the traditional Fenton process.

Combined hydrolysis acidification and bio-contact oxidation system with air-lift tubes and activated carbon bioreactor for oilfield wastewater treatment

This paper investigated the enhancement of the COD reduction of an oilfield wastewater treatment process by installing air-lift tubes and adding an activated carbon bioreactor (ACB) to form a combined hydrolysis acidification and bio-contact oxidation system with air-lift tubes (HA/air-lift BCO) and an ACB. Three heat-resistant bacterial strains were cultivated and subsequently applied in above pilot plant test. Installing air-lift tubes in aerobic tanks reduced the necessary air to water ratio from 20 to 5. Continuous operation of the HA/air-lift BCO system for 2 months with a hydraulic retention time of 36 h, a volumetric load of 0.14 kg COD/(m(3)d) (hydrolysis-acidification or anaerobic tank), and 0.06 kg COD/(m(3)d) (aerobic tanks) achieved an average reduction of COD by 60%, oil and grease by 62%, total suspended solids by 75%, and sulfides by 77%. With a COD load of 0.56 kg/(m(3)d), the average COD in the ACB effluent was 58 mg/L.

"Fish-in-net", a novel method for cell immobilization of Zymomonas mobilis

BACKGROUND

Inorganic mesoporous materials exhibit good biocompatibility and hydrothermal stability for cell immobilization. However, it is difficult to encapsulate living cells under mild conditions, and new strategies for cell immobilization are needed. We designed a "fish-in-net" approach for encapsulation of enzymes in ordered mesoporous silica under mild conditions. The main objective of this study is to demonstrate the potential of this approach in immobilization of living cells.

METHODOLOGY/PRINCIPAL FINDINGS

Zymomonas mobilis cells were encapsulated in mesoporous silica-based materials under mild conditions by using a "fish-in-net" approach. During the encapsulation process, polyethyleneglycol was used as an additive to improve the immobilization efficiency. After encapsulation, the pore size, morphology and other features were characterized by various methods, including scanning electron microscopy, nitrogen adsorption-desorption analysis, transmission electron microscopy, fourier transform infrared spectroscopy, and elemental analysis. Furthermore, the capacity of ethanol production by immobilized Zymomonas mobilis and free Zymomonas mobilis was compared.

CONCLUSIONS/SIGNIFICANCE

In this study, Zymomonas mobilis cells were successfully encapsulated in mesoporous silica-based materials under mild conditions by the "fish-in-net" approach. Encapsulated cells could perform normal metabolism and exhibited excellent reusability. The results presented here illustrate the enormous potential of the "fish-in-net" approach for immobilization of living cells.

Biodegradation of high concentration of nitrobenzene by Pseudomonas corrugata embedded in peat-phosphate esterified polyvinyl alcohol

Efficiency on biodegradation of high concentration of nitrobenzene (NB) by peat-phosphate esterified polyvinyl alcohol-embedded NB-degrading bacteria Pseudomonas corrugata was conducted compared to free bacteria cells. Its biodegradation kinetics, reuse ability, degradation effect in the absence of the essential element needed for the growth of bacteria and degradation efficiency of the raw water from the contaminated site were also invested. Results show that the degradation rate when the concentration of NB was at 600, 750, and 900 mg/L reached 91.02, 83.23, and 55.9 %, which was higher than that observed in free bacteria at the same concentration levels. Biodegradation kinetics of the material could be well described by first- and zero-order kinetics when the concentration of NB was at 300, 450 mg/L and 600, 750, 900 mg/L, respectively. Stable degradation activity (stayed at a level of approximately 70 %) was displayed during the 11th repeat-batch experiment. The affect of absence of phosphorus in the medium can be abated ascribed to the addition of peat, which contributes with organic matter and other elements such as nitrogen and phosphorus necessary to maintain metabolically active the microorganisms. Effective biodegradation of the raw water from the experimental site revealed that the material can be a potential candidate for treating NB-contaminated wastewater in the practical setting.

Degradation of N-heterocyclic indole by a novel endophytic fungus Phomopsis liquidambari

A broad-spectrum endophytic Phomopsis liquidambari, was used to degrade environmental pollutant indole. In the condition of using indole as sole carbon and nitrogen source, the optimum concentration of indole supplied was determined to be 100 mg L(-1), with 41.7% ratio of indole degradation within 120 h. Exogenous addition of plant litter significantly increased indole degradation to 99.1% within 60 h. Indole oxidation to oxindole and isatin were the key steps limiting indole degradation. Plant litter addition induced fungus to produce laccase and LiP to non-specific oxidize indole. The results of fungal metabolites pathway through HPLC-MS and NMR analysis showed that indole was firstly oxidized to oxindole and isatin, and deoxidated to indolenie-2-dione, then hydroxylated to 2-dioxindole, which pyridine ring were cleaved through C-N position and changed to 2-aminobenzoic acid. Such metabolic pathway was similar with bacterial degradation of indole-3-acetic acid in plant.