Biodiesel synthesis and conformation of lipase from Burkholderia cepacia in room temperature ionic liquids and organic solvents

Molecular simulations guide immobilization of lipase on nest-like ZIFs with regulatable hydrophilic/hydrophobic surface

The catalytic performance of immobilized lipase is greatly influenced by functional support, which attracts growing interest for designing supports to achieve their promotive catalytic activity. Many lipases bind strongly to hydrophobic surfaces where they undergo interfacial activation. Herein, the behavioral differences of lipases with distinct lid structures on interfaces of varying hydrophobicity levels were firstly investigated by molecular simulations. It was found that a reasonable hydrophilic/hydrophobic surface could facilitate the lipase to undergo interfacial activation. Building on these findings, a novel "nest"-like superhydrophobic ZIFs (ZIFN) composed of hydrophobic ligands was prepared for the first time and used to immobilize lipase from Aspergillus oryzae (AOL@ZIFN). The AOL@ZIFN exhibited 2.0-folds higher activity than free lipase in the hydrolysis of p-Nitrophenyl palmitate (p-NPP). Especially, the modification of superhydrophobic ZIFN with an appropriate amount of hydrophilic tannic acid can significantly improve the activity of the immobilized lipase (AOL@ZIFN-TA). The AOL@ZIFN-TA exhibited 30-folds higher activity than free lipase, and still maintained 82% of its initial activity after 5 consecutive cycles, indicating good reusability. These results demonstrated that nanomaterials with rational arrangement of the hydrophilic/hydrophobic surface could facilitate the lipase to undergo interfacial activation and improve its activity, displaying the potential of the extensive application.

Ionic Liquids in Metal, Photo-, Electro-, and (Bio) Catalysis

Ionic liquids (ILs) have unique physicochemical properties that make them advantageous for catalysis, such as low vapor pressure, non-flammability, high thermal and chemical stabilities, and the ability to enhance the activity and stability of (bio)catalysts. ILs can improve the efficiency, selectivity, and sustainability of bio(transformations) by acting as activators of enzymes, selectively dissolving substrates and products, and reducing toxicity. They can also be recycled and reused multiple times without losing their effectiveness. ILs based on imidazolium cation are preferred for structural organization aspects, with a semiorganized layer surrounding the catalyst. ILs act as a container, providing a confined space that allows modulation of electronic and geometric effects, miscibility of reactants and products, and residence time of species. ILs can stabilize ionic and radical species and control the catalytic activity of dynamic processes. Supported IL phase (SILP) derivatives and polymeric ILs (PILs) are good options for molecular engineering of greener catalytic processes. The major factors governing metal, photo-, electro-, and biocatalysts in ILs are discussed in detail based on the vast literature available over the past two and a half decades. Catalytic reactions, ranging from hydrogenation and cross-coupling to oxidations, promoted by homogeneous and heterogeneous catalysts in both single and multiphase conditions, are extensively reviewed and discussed considering the knowledge accumulated until now.

Enhanced enzymatic performance of immobilized lipase on metal organic frameworks with superhydrophobic coating for biodiesel production

Inspired by the interfacial catalysis of lipase, Herein, the hydrophobic ZIF-L coated with polydimethylsiloxane (PDMS) were prepared by chemical vapor deposition (CVD) and used to immobilize lipase from Aspergillus oryzae (AOL) for biodiesel production. The results showed that the PDMS coating enhanced the stability of ZIF-8 and ZIF-L in PBS. Immobilization efficiency of AOL on PDMS-modified ZIF-L was 96% under optimized conditions. The resultant immobilized lipase (AOL@PDMS-ZIF-L) exhibited higher activity recovery (430%) than AOL@ZIF-L. Meanwhile, compared with free lipase, the AOL@PDMS-ZIF-L exhibited better storage stability and thermal stability. After 150 days of storage, the free lipase retained only 20% of its original activity of hydrolyzing p-NPP, while the AOL@PDMS-ZIF-L still retained 90% of its original activity. The biodiesel yield catalyzed from soybean oil by free lipase was only 69%, However, the biodiesel yield by AOL@PDMS-ZIF-L reached 94%, and could still be maintained at 85% even after 5 consecutive cycles. It is believed that this convenient and versatile strategy has great promise in the important fields of immobilized lipase on MOF for biodiesel production.

Co-Immobilization of Rhizopus oryzae and Candida rugosa Lipases onto mMWCNTs@4-arm-PEG-NH2-A Novel Magnetic Nanotube-Polyethylene Glycol Amine Composite-And Its Applications for Biodiesel Production

This article describes the successful synthesis of a novel nanocomposite of superparamagnetic multi-walled nanotubes with a four-arm polyethylene glycol amine polymer (mMWCNTs@4-arm-PEG-NH2). This composite was then employed as a support for the covalent co-immobilization of Rhizopus oryzae and Candida rugosa lipases under appropriate conditions. The co-immobilized lipases (CIL-mMWCNTs@4-arm-PEG-NH2) exhibited maximum specific activity of 99.626U/mg protein, which was 34.5-fold superior to that of free ROL, and its thermal stability was greatly improved. Most significantly, CIL-mMWCNTs@4-arm-PEG-NH2 was used to prepare biodiesel from waste cooking oil under ultrasound conditions, and within 120 min, the biodiesel conversion rate reached 97.64%. This was due to the synergy effect between ROL and CRL and the ultrasound-assisted enzymatic process, resulting in an increased biodiesel yield in a short reaction time. Moreover, after ten reuse cycles, the co-immobilized lipases still retained a biodiesel yield of over 78.55%, exhibiting excellent operational stability that is attractive for practical applications. Consequently, the combined use of a novel designed carrier, the co-immobilized lipases with synergy effect, and the ultrasound-assisted enzymatic reaction exhibited potential prospects for future applications in biodiesel production and various industrial applications.

Improvement of lipase biochemical properties via a two-step immobilization method: Adsorption onto silicon dioxide nanoparticles and entrapment in a polyvinyl alcohol/alginate hydrogel

In this study, the factors affecting lipase adsorption onto SiO₂ nanoparticles including SiO₂ nanoparticles amounts (8, 19 and 30 mg/mL), lipase concentrations (30, 90 and 150 μg/mL), adsorption temperatures (5, 20 and 35 °C) and adsorption times (1, 12.5 and 24 h) were optimized using central composite design. The optimal conditions were determined as a SiO₂ nanoparticles amount of 8.5-14 mg/ml, a lipase concentration of 106-116 μg/mL, an adsorption temperature of 20 °C and an adsorption time of 12.5 h, which resulted in a specific activity and immobilization efficiency of 20,000 (U/g protein) and 60 %, respectively. The lipase adsorbed under optimal conditions (SiO₂-lipase) was entrapped in a PVA/Alg hydrogel, successfully. FESEM and FTIR confirmed the two-step method of lipase immobilization. The entrapped SiO₂-lipase retained 76.5 % of its initial activity after 30 days of storage at 4 °C while adsorbed and free lipase retained only 43.4 % and 13.7 %, respectively. SiO₂-lipase activity decreased to 34.43 % after 10 cycles of use, while the entrapped SiO₂-lipase retained about 64.59 % of its initial activity. Compared to free lipase, the K_m values increased and decreased for SiO₂-lipase and entrapped SiO₂-lipase, respectively. V_max value increased for both SiO₂-lipase and entrapped SiO₂-lipase.

Lipase activation by molecular bioimprinting: The role of interactions between fatty acids and enzyme active site

Bioimprinting is an easy, sustainable and low-cost technique that promotes a printing of potential substrates on enzyme structure, inducing a more selective and stable conformation. Bioimprinting promotes conformational changes in enzymes, resulting in better catalytic performance. In this work, the effect of bioimprinting of Burkholderia cepacia lipase (BCL) and porcine pancreatic extracts (PPE) with four different fatty acids (lauric acid (C12:0), myristic acid (C14:0), palmitic acid (C16:0), and stearic acid (C18:0)) was investigated. The results demonstrated that the better bioimprinting effect was in BCL with lauric acid in esterification reaction, promoting BCL activation in which relative enzyme activity was 70 times greater than nonimprinted BCL. Bioimprinting results were influenced by the carbon chain length of fatty acids imprinted in the BCL, in which the effects were weaker with the chain increase. Molecular docking was performed to better understand the bioimprinting method. The results of these simulations showed that indeed all fatty acids were imprinted in the active site of BCL. However, lauric acid presented the highest imprinting preference in the active site of BCL, resulting in the highest relative activity. Furthermore, Fourier transform infrared (FTIR) analysis confirmed important variations in secondary structure of bioimprinting BCL with lauric acid, in which there was a reduction in the α-helix content and an increase in the β-sheet content that facilitated substrate access to the active site of BCL and led higher rigidity, resulting in high activity. Bioimprinted BCL with lauric acid showed excellent operational stability in esterification reaction, maintaining its original relative activity after five successive cycles. Thus, the results show that bioimprinting of BCL with lauric acid is a successful strategy due to its high catalytic activity and reusability.

Catalytic esterification performance of protease in micro-aqueous system

OBJECTIVE

To evaluate the catalytic esterification performance of proteases in micro-aqueous systems and to study the suitable conditions for maintaining protease activity.

RESULTS

It was found that the protease showed better enzyme catalytic activity in the micro-aqueous phase containing 4% boric acid-borax buffer than that of the pure organic phase. The protease activity was easily activated by 0.20 M boric acid-borax buffer, and the enzyme activity was still high for a long time in alkaline environment (pH 8.40-9.60) and under the temperature of 40-55 °C. Experiments using protease and Candida lipase to synthesize sucrose-6-ethyl ester showed that protease had better esterification activity than Candida lipase in the micro-aqueous phase.

Amano Lipase PS from Burkholderia cepacia- Evaluation of the Effect of Substrates and Reaction Media on the Catalytic Activity

:

Lipases in the native or immobilized form have commonly been used as catalysts in the chemical and pharmaceutical industry. One of the widely available enzyme catalysts on the market is lipase from Burkholderia cepacia (BCLs), previously called Pseudomonas cepacia (PCLs). This enzyme is applied, among others, in the stereoselective acylation of molecules to achieve chiral pure enantiomers of drugs or their building blocks. In this study, Amano lipase PS (APS-BCL), which is a commercial lipase from Burkholderia cepacia (BC) was tested. The lipolytic activity of APS-BCL by hydrolysis of vegetable oils and enantioselective activity of APS-BCL by the kinetic resolution of (R,S)-1-phenylethanol with using isopropenyl acetate as an acyl donor were evaluated. An effect of reaction media with different logP values (t-butyl methyl ether, dichloromethane, diisopropyl ether, toluene, cyclohexane, n-hexane, isooctane and n-heptane) on the enantioselective activity of lipase was also studied. The high value of the enantiomeric ratio (E =308.5) with the utilization of isopropenyl acetate was achieved. Whereas, the best reaction medium turned out to be diisopropyl ether, C =47.9%, eep =98%, ees =90%, after 24 h of incubation. Moreover, the influence of ω6/ω9 polyunsaturated fatty acids (PUFAs) ratio in commercial (peanut, camelina, rape, pumpkin seed, walnut, sesame, avocado, rice, corn, black cumin, hemp, safflower, grape seed) oils was investigated for the lipase activity. For the first time, the cut-off limit of ω6/ω9 ratio was proposed. The ratio equal to or higher than 2.3 allows achieving higher lipolytic activity.

Enhancement of biochemical aspects of lipase adsorbed on halloysite nanotubes and entrapped in a polyvinyl alcohol/alginate hydrogel: strategies to reuse the most stable lipase

Entrapment of halloysite nanotubes (HNTs) loaded with enzyme, into a polymer matrix (PVA/Alg), is a way to produce an environment surrounding the adsorbed enzyme molecules which improves the enzyme properties such as storage and operational stability. Hence, in this study, we optimised the factors affecting lipase adsorption onto halloysite nanotubes including halloysite amounts (5, 42.5 and 80 mg), lipase concentrations (30, 90 and 150 µg/ml), temperatures (5, 20 and 35 °C) and adsorption times (30, 165 and 300 min). The optimal conditions were determined as an halloysite amount of 50 to 80 mg, a lipase concentration of 30 to 57 μg/ml, an adsorption temperature of 20 °C and an adsorption time of 165 min, which resulted in a specific activity and adsorption efficiency of 15,000 (U/g protein) and 70%, respectively. Then, lipase adsorbed under optimal conditions was entrapped in a PVA/Alg hydrogel. The formation mechanism of immobilized lipase was investigated by FESEM and FTIR. Subsequent entrapment of adsorbed lipase improved the lipase storage and operational stability. K_m, V_max, K_cat and K_cat/K_m values showed an increase in the entrapped HNT-lipase performance in comparison with the free and adsorbed lipase.

Continuous flow reactor based with an immobilized biocatalyst for the continuous enzymatic transesterification of crude coconut oil

Here, we have assessed the use of one packed bed or two packed bed reactors in series in which Burkholderia cepacia lipase (BCL) was immobilized on protic ionic liquid (PIL)-modified silica and used as a biocatalyst for the transesterification of crude coconut oil. Reaction parameters including volumetric flow, temperature, and molar ratio were evaluated. The conversion of transesterification reaction products (ethyl esters) was determined using gas chromatography and the quantities of intermediate products (diglyceride and monoglyceride [MG]) were assessed using high-performance liquid chromatography. Packed bed reactors in series produced ethyl esters with the greatest efficiency, achieving 65.27% conversion after 96 H at a volumetric flow rate of 0.50 mL Min^-1 at 40 °C and a 1:9 molar ratio of oil to ethanol. Further, within the first 24 H of the reaction, increased MG (54.5%) production was observed. Molecular docking analyses were performed to evaluate the catalytic step of coconut oil transesterification in the presence of BCL. Molecular docking analysis showed that triglycerides have a higher affinity energy (-5.7 kcal mol^-1 ) than the smallest MG (-6.0 kcal mol^-1 ), therefore, BCL catalyzes the conversion of triglycerides rather than MG, which is consistent with experimental results.

Lipases: Sources, Production, Purification, and Applications

Background and Sources: Lipase enzyme is a naturally occurring enzyme found in the stomach and pancreatic juice. Its function is to digest fats and lipids, helping to maintain correct gallbladder function. Lipase is the one such widely used and versatile enzyme. These enzymes are obtained from animals, plants and as well as from several microorganisms and are sufficiently stable. These are considered as nature's catalysts, but commercially, only microbial lipases are being used significantly. Applications: They found enormous application in the industries of fat and oil processing, oleochemical industry, food industry, detergents, pulp and paper industry, detergents, environment management, tea processing, biosensors and cosmetics and perfumery. Various recent patents related to lipases have been revised in this review. Conclusion: Lipases are very peculiar as they have the ability to hydrolyse fats into fatty acids and glycerols at the water-lipid interface and can reverse the reaction in non-aqueous media. This natural ability makes it the most widely used enzyme in various industrial applications. This article deals with the immense versatility of lipase enzymes along with the recent advancements done in the various fields related to their purification and mass production in industries.

Purification and characterization of a glucose-tolerant β-glucosidase from black plum seed and its structural changes in ionic liquids

The objective of this study was to characterize a plant origin β-glucosidase from black plum seeds and identify its conformational changes in twenty-six imidazolium- and amino acid-based ionic liquids (ILs). The results revealed that the purified 60 kDa enzyme was monomeric in nature, maximally active at 55 °C and pH 5.0, and nearly completely inhibited by Hg²⁺ and Ag⁺. Attractive peculiarities of the relative low kinetic and higher glucose inhibition constants (K_m = 0.58 mM [pNPG]; K_i = 193.5 mM [glucose]) demonstrated its potential applications in food industry. Circular dichroism studies showed that the secondary structural changes of the enzyme depended not only on the anions, but also on the cations of the assayed ILs. Interestingly, no corresponding relations were observed between the changes in enzyme structure induced by ILs and its catalytic activities, suggesting that the influences of ILs on enzymatic processes don't rely simply on enzyme conformational changes.

Ionic Liquids: Efficient Media for the Lipase-Catalyzed Michael Addition

Recently, ionic liquids (ILs) have been regarded as ideal media for non-aqueous bio-catalysis. In this work, the synthesis of warfarin by the lipase-catalyzed Michael addition in IL media and the parameters that affected the warfarin yield were investigated. Experimental results demonstrated that the chemical structures of the ILs were a major factor for influencing the warfarin yield. The ILs containing the NTf₂^– anion were suitable reaction media due to the high chemical stability of this anion. The incorporation of the hydroxyl group on the IL cation significantly improved the lipase activity due to the H₂O-mimicking property of this group. The lipase activity decreased by increasing the alkyl chain length on the IL cation due to the non-polar domain formation of the IL cation at the active site entrance of lipase. The ILs and lipase could be reused no less than five times without reduction in the warfarin yield.

Burkholderia cepacia lipase immobilized on heterofunctional magnetic nanoparticles and its application in biodiesel synthesis

Biodiesel production using immobilized lipase as a biocatalyst is a promising process. The performance of immobilized lipase is mainly determined by supporting materials and immobilization method. To avoid the shortcomings of adsorption and covalent bonding methods, in this study, we developed a novel heterofunctional carrier of being strengthened anion exchange and weakened covalent binding to avoid activity loss and improve operational stability of the immobilized lipase. 2,3-epoxypropyltrimethylammonium chloride with epoxy and quaternary ammonium group and glutaraldehyde were grafted onto aminated magnetic nanoparticles (AMNPs) to generate a new matrix, named GEAMNP. Then Burkholderia cepacia lipase (BCL) was immobilized on GEAMNP via anion exchange and covalent bonding. The transesterification between soybean oil and methanol was used to test the activities. Activity recovery of the immobilized BCL was up to 147.4% and the corresponding transesterification activity was 1.5-fold than that of BCL powder. The immobilized lipase was further used for biodiesel production to confirm its feasibility. The fatty acid methyl esters conversion yield could reach 96.8% in the first 12 h. Furthermore, the immobilized lipase, BCL-GEAMNP showed markedly improved operational stability, better reusability and higher esters than BCL-GAMNP, where MNPs were only modified with (3-aminopropyl) triethoxysilane and glutaraldehyde.

Carbon nanotube filled with magnetic iron oxide and modified with polyamidoamine dendrimers for immobilizing lipase toward application in biodiesel production

Superparamagnetic multi-walled carbon nanotubes (mMWCNTs) were prepared by filling multi-walled carbon nanotubes (MWCNTs) with iron oxide, and further modified by linking polyamidoamine (PAMAM) dendrimers (mMWCNTs-PAMAM) on the surface. Then, mMWCNTs-PAMAM was employed as the carrier and successfully immobilized Burkholderia cepacia lipase (BCL) via a covalent method (BCL-mMWCNTs-G3). The maximum activity recovery of the immobilized lipase was 1,716% and the specific activity increased to 77,460 U/g-protein, 17-fold higher than that of the free enzyme. The immobilized lipase displayed significantly enhanced thermostability and pH-resistance, and could efficiently catalyze transesterification to produce biodiesel at a conversion rate of 92.8%. Moreover, it possessed better recycling performance. After 20 cycles of repeated used, it still retained ca. 90% of its original activity, since the carbon nanotube-enzyme conjugates could be easily separated from the reaction mixture by using a magnet. This study provides a new perspective for biotechnological applications by adding a magnetic property to the unique intrinsic properties of nanotubes.

X-Ray Crystallography as a Tool to Determine Three-Dimensional Structures of Commercial Enzymes Subjected to Treatment in Pressurized Fluids

The study of enzyme function often involves a multi-disciplinary approach. Several techniques are documented in the literature towards determining secondary and tertiary structures of enzymes, and X-ray crystallography is the most explored technique for obtaining three-dimensional structures of proteins. Knowledge of three-dimensional structures is essential to understand reaction mechanisms at the atomic level. Additionally, structures can be used to modulate or improve functional activity of enzymes by the production of small molecules that act as substrates/cofactors or by engineering selected mutants with enhanced biological activity. This paper presentes a short overview on how to streamline sample preparation for crystallographic studies of treated enzymes. We additionally revise recent developments on the effects of pressurized fluid treatment on activity and stability of commercial enzymes. Future directions and perspectives on the the role of crystallography as a tool to access the molecular mechanisms underlying enzymatic activity modulation upon treatment in pressurized fluids are also addressed.

Enzymatic Hydrolytic Resolution of Racemic Ibuprofen Ethyl Ester Using an Ionic Liquid as Cosolvent

The aim of this study was to develop an ionic liquid (IL) system for the enzymatic resolution of racemic ibuprofen ethyl ester to produce (S)-ibuprofen. Nineteen ILs were selected for use in buffer systems to investigate the effects of ILs as cosolvents for the production of (S)-ibuprofen using thermostable esterase (EST10) from Thermotoga maritima. Analysis of the catalytic efficiency and conformation of EST10 showed that [OmPy][BF₄] was the best medium for the EST10-catalyzed production of (S)-ibuprofen. The maximum degree of conversion degree (47.4%), enantiomeric excess of (S)-ibuprofen (96.6%) and enantiomeric ratio of EST10 (177.0) were achieved with an EST10 concentration of 15 mg/mL, racemic ibuprofen ethyl ester concentration of 150 mM, at 75 °C , with a reaction time of 10 h. The reaction time needed to achieve the highest yield of (S)-ibuprofen was decreased from 24 h to 10 h. These results are relevant to the proposed application of ILs as solvents for the EST10-catalyzed production of (S)-ibuprofen.

Surfactant-activated lipase hybrid nanoflowers with enhanced enzymatic performance

Increasing numbers of materials have been extensively used as platforms for enzyme immobilization to improve catalytic performance. However, activity of the most of the enzymes was declined after immobilization. Here, we develop a surfactant-activated lipase-inorganic flowerlike hybrid nanomaterials with rational design based on interfacial activation and self-assembly. The resulting surfactant-activated lipase-inorganic hybird nanoflower (activated hNF-lipase) exhibited 460% and 200% higher activity than native lipase and conventional lipase-inorganic hybird nanoflower (hNF-lipase). Furthermore, the activated hNF-lipase displayed good reusability due to its monodispersity and mechanical properties, and had excellent long-time stability. The superior catalytic performances were attributed to both the conformational modulation of surfactants and hierarchical structure of nanoflowers, which not only anchored lipases in an active form, but also decreased the enzyme-support negative interaction and mass-transfer limitations. This new biocatalytic system is promising to find widespread use in applications related to biomedicine, biosensor, and biodiesel.

A review on green trend for oil extraction using subcritical water technology and biodiesel production

It became a global agenda to develop clean alternative fuels which were domestically available, environmentally acceptable and technically feasible. Thus, biodiesel was destined to make a substantial contribution to the future energy demands of the domestic and industrial economies. Utilization of the non edible vegetable oils as raw materials for biodiesel production had been handled frequently for the past few years. The oil content of these seeds could be extracted by different oil extraction methods, such as mechanical extraction, solvent extraction and by subcritical water extraction technology SWT. Among them, SWT represents a new promising green extraction method. Therefore this review covered the current used non edible oil seeds for biodiesel production as well as giving a sharp focus on the efficiency of using the SWT as a promising extraction method. In addition the advantages and the disadvantages of the different biodiesel production techniques would be covered.

Protein Stabilization and Enzyme Activation in Ionic Liquids: Specific Ion Effects

There are still debates on whether the hydration of ions perturbs the water structure, and what is the degree of such disturbance; therefore, the origin of Hofmeister effect on protein stabilization continues being questioned. For this reason, it is suggested to use the 'specific ion effect' instead of other misleading terms such as Hofmeister effect, Hofmeister series, lyotropic effect, and lyotropic series. In this review, we firstly discuss the controversial aspect of inorganic ion effects on water structures, and several possible contributors to the specific ion effect of protein stability. Due to recent overwhelming attraction of ionic liquids (ILs) as benign solvents in many enzymatic reactions, we further evaluate the structural properties and molecular-level interactions in neat ILs and their aqueous solutions. Next, we systematically compare the specific ion effects of ILs on enzyme stability and activity, and conclude that (a) the specificity of many enzymatic systems in diluted aqueous IL solutions is roughly in line with the traditional Hofmeister series albeit some exceptions; (b) however, the specificity follows a different track in concentrated or neat ILs because other factors (such as hydrogen-bond basicity, nucelophilicity, and hydrophobicity, etc) are playing leading roles. In addition, we demonstrate some examples of biocatalytic reactions in IL systems that are guided by the empirical specificity rule.

Influence of ionic liquids on lipase activity and stability in alcoholysis reactions

Lipase activity and stability in ionic liquids containing N,N-dialkylimidazolium cations and different anions were investigated in alcoholysis reactions.

Displaying Lipase B from Candida antarctica in Pichia pastoris Using the Yeast Surface Display Approach: Prospection of a New Anchor and Characterization of the Whole Cell Biocatalyst

Yeast Surface Display (YSD) is a strategy to anchor proteins on the yeast cell wall which has been employed to increase enzyme stability thus decreasing production costs. Lipase B from Candida antarctica (LipB) is one of the most studied enzymes in the context of industrial biotechnology. This study aimed to assess the biochemical features of this important biocatalyst when immobilized on the cell surface of the methylotrophic yeast Pichia pastoris using the YSD approach. For that purpose, two anchors were tested. The first (Flo9) was identified after a prospection of the P. pastoris genome being related to the family of flocculins similar to Flo1 but significantly smaller. The second is the Protein with Internal Repeats (Pir1) from P. pastoris. An immunolocalization assay showed that both anchor proteins were able to display the reporter protein EGFP in the yeast outer cell wall. LipB was expressed in P. pastoris fused either to Flo9 (FLOLIPB) or Pir1 (PIRLIPB). Both constructions showed hydrolytic activity towards tributyrin (>100 U/mg_dcw and >80 U/mg_dcw, respectively), optimal hydrolytic activity around 45°C and pH 7.0, higher thermostability at 45°C and stability in organic solvents when compared to a free lipase.

Efficient mono-acylation of fructose by lipase-catalyzed esterification in ionic liquid co-solvents

Fructose monoesters are eco-friendly nonionic surfactants in various applications. Selective preparation of mono-acylated fructose is challenging due to the multiple hydroxyl sites available for acylation both chemically and enzymatically. Ionic liquids (ILs) have profound impacts not only on the reaction media but also on the catalytic properties of enzymes in the acylation process. In this study, utilizing an IL co-solvent system, selective synthesis of mono-acylated fructose with lauric acid catalyzed by immobilized Candida antarctica lipase B (CALB) was investigated. The imidazolium-based ILs selected as co-solvents with 2-methyl-2-butanol (2M2B) markedly improved the ratios of monolauroyl fructose in the presence of 60% [BMIM][TfO] (v/v) and 20% [BMIM][BF4] (v/v), in which the mono-acylated fructose was 85% and 78% respectively. Based on a Ping-Pong Bi-Bi model, a kinetic equation was fitted, by which the kinetic parameters revealed that the affinity between fructose and acyl-enzyme intermediate was enhanced. The inhibition effect of fructose on free enzyme was weakened in the presence of IL co-solvents. The conformation of CALB binding substrates also changed in the co-solvent system as demonstrated by Fourier transform infrared spectra. These results demonstrated that the variation of CALB kinetic characteristics was a crucial factor for the selectivity of mono-acylation in ILs/2M2B co-solvents.