Biohydrogen production from sugarcane bagasse by integrating dark- and photo-fermentation

The inhibition mechanism of co-cultured probiotics on biofilm formation of Klebsiella pneumoniae

AIMS

Klebsiella pneumoniae, an important opportunistic pathogen of nosocomial inflection, is known for its ability to form biofilm. The purpose of the current study is to assess how co- or mono-cultured probiotics affect K. pneumoniae's ability to produce biofilms and investigate the potential mechanisms by using a polyester nonwoven chemostat and a Caco-2 cell line.

METHODS AND RESULTS

Compared with pure cultures of Lactobacillus rhamnosus and Lactobacillus sake, the formation of K. pneumoniae biofilm was remarkably inhibited by the mixture of L. rhamnosus, L. sake, and Bacillus subtilis at a ratio of 5:5:1 by means of qPCR and FISH assays. In addition, Lactobacillus in combination with B. subtilis could considerably reduce the adherence of K. pneumoniae to Caco-2 cells by using inhibition, competition, and displacement assays. According to the RT-PCR assay, the adsorption of K. pneumoniae to Caco-2 cells was effectively inhibited by the co-cultured probiotics, leading to significant reduction in the expression of proinflammatory cytokines induced by K. pneumoniae. Furthermore, the HPLC and RT-PCR analyses showed that the co-cultured probiotics were able to successfully prevent the expression of the biofilm-related genes of K. pneumoniae by secreting plenty of organic acids as well as the second signal molecule (c-di-GMP), resulting in inhibition on biofilm formation.

CONCLUSION

Co-culture of L. sake, L. rhamnosus, and B. subtilis at a ratio of 5:5:1 could exert an antagonistic effect on the colonization of pathogenic K. pneumoniae by down-regulating the expression of biofilm-related genes. At the same time, the co-cultured probiotics could effectively inhibit the adhesion of K. pneumoniae to Caco-2 cells and block the expression of proinflammatory cytokines induced by K. pneumoniae.

Production of biological hydrogen from Quinoa residue using dark fermentation and estimation of its microbial diversity

Although they are one of the world's environmental problems, agricultural wastes or residues are carbohydrate-rich and low-cost, so they are used as raw materials for the manufacture of biohydrogen (bio-H2). Among biological hydrogen manufacture methods, the dark fermentation method is suitable for processing waste or residues. In this regard, no study has been found in the literature on determining the potential of biological hydrogen manufacture from quinoa residue by the dark fermentation method. This work was carried out in a dark room at 36 ± 1 °C under different operating conditions in anaerobic batch bio-reactors fed with thermally pretreated anaerobic mixed bacteria + raw quinoa or quinoa extract liquid + nutrients. In the study, gas analyses were performed and biohydrogen production was detected in all the bio-reactors. Besides, taxonomic content analyses and organic acid analyses were executed. Maximum bio-H2 production was found as follows: at pH 4.5, 14,543.10-4 mL in the bio-reactor fed with 1.00 g quinoa/L and 1880.10-4 mL in the bio-reactor fed with 0.50 g quinoa extract/L, and at pH 4.0, 61,537.10-4 mL in the bio-reactor fed with 1.00 g quinoa/L and 1511.10-4 mL in the bio-reactor fed with 0.75 g quinoa extract/L. In the bio-reactors fed with raw quinoa residue, Clostridium butyricum and Hathewaya histolytica were detected as the most dominant bacteria at pH 4.5 and 4.0, respectively, whereas in the bio-reactors fed with quinoa extract liquid, Fonticella tunisiensis were detected as the most dominant bacteria at both pH 4.5 and pH 4.0.

Mixed culture biotechnology and its versatility in dark fermentative hydrogen production

Over the years, extensive research has gone into fermentative hydrogen production using pure and mixed cultures from waste biomass with promising results. However, for up-scaling of hydrogen production mixed cultures are more appropriate to overcome the operational difficulties such as a metabolic shift in response to environmental stress, and the need for a sterile environment. Mixed culture biotechnology (MCB) is a robust and stable alternative with efficient waste and wastewater treatment capacity along with co-generation of biohydrogen and platform chemicals. Mixed culture being a diverse group of bacteria with complex metabolic functions would offer a better response to the environmental variations encountered during biohydrogen production. The development of defined mixed cultures with desired functions would help to understand the microbial community dynamics and the keystone species for improved hydrogen production. This review aims to offer an overview of the application of MCB for biohydrogen production.

The comprehensive characterization of Prosopis juliflora pods as a potential bioenergy feedstock

The production of renewable and sustainable biofuels using inevitable wastes is a promising alternative to the alarming depletion of fossil fuels. Significantly, the sustainable biorefinery of lignocellulosic waste, as an alternative fuel source, is a prognosticating approach to tackle many agricultural/forestry residues and offers a circular economy as well as environmental benefits. But, the heterogeneity of lignocellulosic biomass is one of the major bottlenecks in lignocellulosic biorefinery. Thus the characterization of lignocellulosic biomass is essential to understanding the feedstock's nature, composition and suitability for biofuel production. The present study taps evergreen spiny non-edible pods of Prosopis juliflora (Pj) as an energy feedstock. Proximate, ultimate and biochemical characterization of Pj pods were conducted, and thermal behaviour and calorific values were determined. Cellulose and hemicellulose were isolated and characterized by reliable methods. The overall characterization has revealed the Pj pods as a potential feedstock for bioenergy. The collected Pj pods contain (% w/w) moisture 7.89 ± 0.002, volatile matter 87.67 ± 0.002, ash 0.21 ± 0.002, fixed carbon 4.23 ± 0.002 with a calorific value of 17.62 kg/MJ. The CHNS content was (w/w %) carbon 41.77, nitrogen 3.58, sulfur 26.3 and hydrogen 6.55. The biochemical composition analysis yields (% w/w) on a dry basis; cellulose 26.6 ± 0.18, hemicellulose 30.86 ± 0.27, lignin 4.71 ± 0.12, protein 11.63 ± 0.12 and starch 1.1 ± 0.06 and extractives 30.56 ± 0.008. The isolated cellulose and hemicellulose were analyzed and confirmed by CP/MAS &¹H NMR, FTIR, TG-DSC, SEM, XRD, and TGA. The present results revealed that the tested biomass, Prosopis juliflora, could be used as a feedstock in biorefinery for bioenergy.

Recent Advances in Biomass Pretreatment Technologies for Biohydrogen Production

Hydrogen is an economical source of clean energy that has been utilized by industry for decades. In recent years, demand for hydrogen has risen significantly. Hydrogen sources include water electrolysis, hydrocarbon steam reforming, and fossil fuels, which emit hazardous greenhouse gases and therefore have a negative impact on global warming. The increasing worldwide population has created much pressure on natural fuels, with a growing gap between demand for renewable energy and its insufficient supply. As a result, the environment has suffered from alarming increases in pollution levels. Biohydrogen is a sustainable energy form and a preferable substitute for fossil fuel. Anaerobic fermentation, photo fermentation, microbial and enzymatic photolysis or combinations of such techniques are new approaches for producing biohydrogen. For cost-effective biohydrogen production, the substrate should be cheap and renewable. Substrates including algal biomass, agriculture residue, and wastewaters are readily available. Moreover, substrates rich in starch and cellulose such as plant stalks or agricultural waste, or food industry waste such as cheese whey are reported to support dark- and photo-fermentation. However, their direct utilization as a substrate is not recommended due to their complex nature. Therefore, they must be pretreated before use to release fermentable sugars. Various pretreatment technologies have been established and are still being developed. This article focuses on pretreatment techniques for biohydrogen production and discusses their efficiency and suitability, including hybrid-treatment technology.

Research and economic perspectives on an integrated biorefinery approach for the simultaneous production of polyhydroxyalkanoates and biohydrogen

Alarming environmental impacts have been resulted across the globe due to the recovery and consumption of fossil fuels. The elevated global carbon footprint has paved the way to an alternative to combat the prevalent pollution. On the other hand, the fossil-based plastics produced from the byproducts of petroleum remain intact in the environment leading to pollution. Fossil abated bioproducts are in high demand due to the increase in pollution. This call to utilize feedstock for simultaneous production of biologically useful products through carbon capture utilisation where the leftover carbon-rich substrate is converted into usable chemicals like bioplastics, methanol, urea and various other industrially essential components. The present review extensively focuses on the research and economic perspectives of an integrated biorefinery and addresses technical breaches, bottlenecks, and efficient strategies for the simultaneous production of biohydrogen and polyhydroxyalkanoates.

Integrated biohydrogen production via lignocellulosic waste: Opportunity, challenges & future prospects

Hydrogen production through biological route is the cleanest, renewable and potential way to sustainable energy generation. Productions of hydrogen via dark and photo fermentations are considered to be more sustainable and economical approach over numerous existing biological modes. Nevertheless, both the biological modes suffer from certain limitations like low yield and production rate, and because of these practical implementations are still far away. Therefore, the present review provides an assessment and feasibility of integrated biohydrogen production strategy by combining dark and photo-fermentation as an advanced biochemical processing while using lignocellulosics biomass to improve and accelerate the biohydrogen production technology in a sustainable manner. This review also evaluates practical viability of the integrated approach for biohydrogen production along with the analysis of the key factors which significantly influence to elevate this technology on commercial ground with the implementation of various environment friendly and innovative approaches.

Food Waste: A Promising Source of Sustainable Biohydrogen Fuel

Annually, approximately 1.3 billion tons of food is lost worldwide, accounting for one-third of annual food production. Therefore, turning food waste into energy is of enormous environmental significance because of its sustainable nature. Nutrients and organic acids present in food waste can be used to produce (bio)products such as biohydrogen through biological processes. However, our understanding of the production of biohydrogen from food waste through photofermentation and dark fermentation is still restricted. This comprehensive study aims to review the potential of food waste for biohydrogen production using microbial mediators, including a brief overview of process parameters that affect the (bio)hydrogen production pathway.

Prospects for the Improvement of Bioethanol and Biohydrogen Production from Mixed Starch-Based Agricultural Wastes

The need for fossil fuel alternatives keeps increasing. Bioethanol and biohydrogen have emerged as significant renewable options. However, these bioprocess routes have presented various challenges, which constantly impede commercialization. Most of these bottlenecks are hinged on feedstock logistics, low biofuel yield and enormous process costs. Meanwhile, a large output of renewable energy can be generated from mixed starch-based agricultural wastes due to their intrinsic bioenergy characteristics. This study, therefore, focuses on the production of bioethanol and biohydrogen from mixed starch-based agricultural wastes. The content further highlights the current challenges of their individual processes and elucidates the prospects for improvement, through an integrated biofuel approach. The use of mixed starch-based agricultural wastes as substrates for integrated bioethanol and biohydrogen production was proposed. Furthermore, the use of mixture-based experimental design for the determination of optimal values of critical factors influencing biofuel production emerges as a viable prospect for profitable bioethanol production from the starch-based biomass. Additionally, biohydrogen production from effluents of the mixed starch-based waste bioethanol looked promising. Thus, the study proposed valuable insights towards achieving a cost-effective biofuel technology.

Bio-hydrogen and bio-methane potential analysis for production of bio-hythane using various agricultural residues

The present study targeted towards the feasibility of various agricultural residues for bio-hythane production by anaerobic digestion (AD) process without pre-treatment. Biochemical methane potential (BMP) analysis was carried out for mixed fruit waste (MFW), mixed vegetable waste (MVW), sugarcane bagasse (SB), rice husk (RH), and wheat straw (WS). The analysis of gas was carried out in gas chromatography with a thermal conductivity detector (GC-TCD). The BMP test results in the study for SB, MFW, and MVW reveal that the average percentage value of bio-hythane production was 53.64%, 43.54%, and 40.92% and that of RH and WS was 16.74% and 29.75%, respectively. The result also shows that agricultural biomass, such as WS and RH produces less % of bio-hythane due to the presence of lignocellulosic components. The main contribution of this study is to highlight the bio-hythane potential with reference to the bio-methane and bio-hydrogen productions from the agricultural residues.

Development of novel strategies for higher fermentative biohydrogen recovery along with novel metabolites from organic wastes: The present state of the art

Depletion of fossil fuels and environmental concern has compelled us to search for alternative fuel. Hydrogen is considered as a dream fuel as it has high energy content (142 kJ g^-1 ) and is not chemically bound to carbon. At present, fossil fuel-based methods for producing hydrogen require high-energy input, which makes the processes expensive. The major processes for biohydrogen production are biophotolysis, microbial electrolysis, dark fermentation, and photofermentation. Fermentative hydrogen production has the additional advantages of potentially using various waste streams from different industries as feedstock. Novel strategies to enhance the productivity of fermentative hydrogen production include optimization in pretreatment methods, integrated fermentation systems (sequential and combined fermentation), use of nanoparticles as additives, metabolic engineering of microorganisms, improving the light utilization efficiency, developing more efficient photobioreactors, etc. More focus has been given to produce biohydrogen in a biorefinery approach in which, along with hydrogen gas, other metabolites (ethanol, butyric acid, 1,3-propanediol, etc.) are also produced, which have direct/indirect industrial applications. In present review, various emerging technologies that highlight biohydrogen production methods as effective and sustainable methods on a large scale have been critically reviewed. The possible future developments are also outlined.

Purple phototrophic bacteria for resource recovery: Challenges and opportunities

Sustainable development is driving a rapid focus shift in the wastewater and organic waste treatment sectors, from a "removal and disposal" approach towards the recovery and reuse of water, energy and materials (e.g. carbon or nutrients). Purple phototrophic bacteria (PPB) are receiving increasing attention due to their capability of growing photoheterotrophically under anaerobic conditions. Using light as energy source, PPB can simultaneously assimilate carbon and nutrients at high efficiencies (with biomass yields close to unity (1 g COD_biomass·g COD_removed^-1)), facilitating the maximum recovery of these resources as different value-added products. The effective use of infrared light enables selective PPB enrichment in non-sterile conditions, without competition with other phototrophs such as microalgae if ultraviolet-visible wavelengths are filtered. This review reunites results systematically gathered from over 177 scientific articles, aiming at producing generalized conclusions. The most critical aspects of PPB-based production and valorisation processes are addressed, including: (i) the identification of the main challenges and potentials of different growth strategies, (ii) a critical analysis of the production of value-added compounds, (iii) a comparison of the different value-added products, (iv) insights into the general challenges and opportunities and (v) recommendations for future research and development towards practical implementation. To date, most of the work has not been executed under real-life conditions, relevant for full-scale application. With the savings in wastewater discharge due to removal of organics, nitrogen and phosphorus as an important economic driver, priorities must go to using PPB-enriched cultures and real waste matrices. The costs associated with artificial illumination, followed by centrifugal harvesting/dewatering and drying, are estimated to be 1.9_, 0.3-2.2 and 0.1-0.3 $·kg_{dry biomass}^-1. At present, these costs are likely to exceed revenues. Future research efforts must be carried out outdoors, using sunlight as energy source. The growth of bulk biomass on relatively clean wastewater streams (e.g. from food processing) and its utilization as a protein-rich feed (e.g. to replace fishmeal, 1.5-2.0 $·kg^-1) appears as a promising valorisation route.

Sustainable valorization of sugar industry waste: Status, opportunities, and challenges

Sugarcane processing in sugar industry results in generation of vast amounts of wastes, which can be valorized to biofuels and value-added chemicals based on the concept of circular bioeconomy. For successful commercialization, economic and technological bottlenecks must be clearly identified. In this review, the state of the art of various valorization routes are discussed for each waste stream. Subsequently, studies quantifying the environmental impacts and performing techno-economic assessment are reviewed. The scope and bottlenecks involved in the commercialization of these routes are identified and discussed. The review shows that electricity production from bagasse has matured as a technology but the production of value-added chemicals is still lagging. Here, downstream separation and purification are the major hurdles needing technological innovation. Moreover, indirect environmental and human health benefits due to waste valorization are not adequately accounted for. Further, strong trade-offs between economic and environmental performance exist, necessitating systematic and region-specific decision-making framework.

Delta-Integration of Single Gene Shapes the Whole Metabolomic Short-Term Response to Ethanol of Recombinant Saccharomyces cerevisiae Strains

In yeast engineering, metabolic burden is often linked to the reprogramming of resources from regular cellular activities to guarantee recombinant protein(s) production. Therefore, growth parameters can be significantly influenced. Two recombinant strains, previously developed by the multiple δ-integration of a glucoamylase in the industrial Saccharomyces cerevisiae 27P, did not display any detectable metabolic burden. In this study, a Fourier Transform InfraRed Spectroscopy (FTIR)-based assay was employed to investigate the effect of δ-integration on yeast strains’ tolerance to the increasing ethanol levels typical of the starch-to-ethanol industry. FTIR fingerprint, indeed, offers a holistic view of the metabolome and is a well-established method to assess the stress response of microorganisms. Cell viability and metabolomic fingerprints have been considered as parameters to detecting any physiological and/or metabolomic perturbations. Quite surprisingly, the three strains did not show any difference in cell viability but metabolomic profiles were significantly altered and different when the strains were incubated both with and without ethanol. A LC/MS untargeted workflow was applied to assess the metabolites and pathways mostly involved in these strain-specific ethanol responses, further confirming the FTIR fingerprinting of the parental and recombinant strains. These results indicated that the multiple δ-integration prompted huge metabolomic changes in response to short-term ethanol exposure, calling for deeper metabolomic and genomic insights to understand how and, to what extent, genetic engineering could affect the yeast metabolome.

Waste based hydrogen production for circular bioeconomy: Current status and future directions

The present fossil fuel-based energy sector has led to significant industrial growth. On the other hand, the dependence on fossil fuels leads to adverse impact on the environment through releases of greenhouse gases. In this scenario, one possible substitute is biohydrogen, an eco-friendly energy carrier as high-energy produces. The substrates rich in organic compounds like organic waste/wastewater are very useful for improved hydrogen generation through the dark fermentation. Thus, this review article, initially, the status of biohydrogen production from organic waste and various strategies to enhance the process efficiency are concisely discussed. Then, the practical confines of biohydrogen processes are thoroughly discussed. Also, alternate routes such as multiple process integration approach by adopting biorefinery concept to increase overall process efficacy are considered to address industrial-level applications. To conclude, future perspectives besides with possible ways of transforming dark fermentation effluent to biofuels and biochemicals, which leads to circular bioeconomy, are discussed.

Novel integration of biohydrogen production with fungal biodiesel production process

An integration of bio-H₂ with fungal biodiesel production process was investigated. Highest cumulative H₂ production of 3.3 ± 0.20 L L^-1 was observed during media optimization using mixture design. Using optimized media composition, continuous H₂ production at 0.2 h^-1 dilution rate, showed highest H₂ production rate, H₂ yield and biomass yield of 1020 ± 23 mL L^-1 h^-1, 2.8 ± 0.1 mols mol^-1 reducing sugar and 1.2 ± 0.06 g L^-1, respectively. Using the spent media generated from the dark fermentation, oleaginous yeast cultivation was done. Highest biomass and total lipid yield of 6.4 ± 0.20 g L^-1 and 0.46 ± 0.04 g g^-1 was observed at initial 15% v/v inoculums strength, pH of 5, 1.5 L min^-1 aeration rate and 25 °C temperature of cultivation, respectively. Energy recovery improved by 90.3% in integrated process when compared with single stage hydrogen production.

Potential use and the energy conversion efficiency analysis of fermentation effluents from photo and dark fermentative bio-hydrogen production

Effluent of bio-hydrogen production system also can be adopted to produce methane for further fermentation, cogeneration of hydrogen and methane will significantly improve the energy conversion efficiency. Platanus Orientalis leaves were taken as the raw material for photo- and dark-fermentation bio-hydrogen production. The resulting concentrations of acetic, butyric, and propionic acids and ethanol in the photo- and dark-fermentation effluents were 2966mg/L and 624mg/L, 422mg/L and 1624mg/L, 1365mg/L and 558mg/L, and 866mg/L and 1352mg/L, respectively. Subsequently, we calculated the energy conversion efficiency according to the organic contents of the effluents and their energy output when used as raw material for methane production. The overall energy conversion efficiencies increased by 15.17% and 22.28%, respectively, when using the effluents of photo and dark fermentation. This two-step bio-hydrogen and methane production system can significantly improve the energy conversion efficiency of anaerobic biological treatment plants.

Production of bioethanol from multiple waste streams of rice milling

This work describes the feasibility of using rice milling by-products as feedstock for bioethanol. Starch-rich residues (rice bran, broken, unripe and discolored rice) were individually fermented (20%w/v) through Consolidated Bioprocessing by two industrial engineered yeast secreting fungal amylases. Rice husk (20%w/v), mainly composed by lignocellulose, was pre-treated at 55°C with alkaline peroxide, saccharified through optimized dosages of commercial enzymes (Cellic® CTec2) and fermented by the recombinant strains. Finally, a blend of all the rice by-products, formulated as a mixture (20%w/v) according to their proportions at milling plants, were co-processed to ethanol by optimized pre-treatment, saccharification and fermentation by amylolytic strains. Fermenting efficiency for each by-product was high (above 88% of the theoretical) and further confirmed on the blend of residues (nearly 52g/L ethanol). These results demonstrated for the first time that the co-conversion of multiple waste streams is a promising option for second generation ethanol production.

Visible light-assisted efficient degradation of dye pollutants with biomass-supported TiO2 hybrids

The objective of this work was to develop a novel organic-inorganic hybrid nanomaterial from agricultural biomass waste for environmental applications. The sugarcane bagasse (SB) supported TiO₂ hybrids were firstly synthesized via a sol-gel method. A series of characterizations were carried out to reveal the structures and components of obtained hybrids. Due to organic-inorganic hybrid (OIH) effect and element doping, the SB-TiO₂ hybrid can expand its optical absorbance ranging from ultraviolet to visible light. The optimal hybrid catalyst prepared with SB doping amount of 2g in 100mL titanic gel and calcined at 200°C was able to degradate 95.0% methyl orange (MO) in 5h under visible light. This study will pave a new and facile pathway for novel visible light driven photocatalysts based on TiO₂ modified by agricultural biomass waste.

Photo-fermentative hydrogen production from crop residue: A mini review

Photofermentative hydrogen production from crop residues, if feasible, can lead to complete conversion of organic substances to hydrogen (and carbon dioxide). This mini review lists the studies on photofermentative hydrogen production using crop residues as feedstock. Pretreatment methods, substrate structure, mechanism of photosynthetic bacteria growth and metabolism were discussed. Photofermentative hydrogen production from pure culture, consortia and mutants, and the geometry, light sources, mass transfer resistances and the operational strategies of the photo-bioreactor were herein reviewed. Future studies of regulation mechanism of photosynthetic bacteria, such as highly-efficient strain breeding and gene reconstruction, and development of new-generation photo-bioreactor were suggested.

Photofermentative production of hydrogen and poly-β-hydroxybutyrate from dark fermentation products

The aim of this work is to investigate the hydrogen and poly-β-hydroxybutyrate (PHB) production during the photofermentative treatment of the effluent from a dark fermentation reactor fed with the organic fraction of municipal solid waste. Two different inocula, an adapted culture of Rhodobacter sphaeroides AV1b and a mixed consortium of purple non sulphur bacteria have been investigated under the same operational conditions. Different hydrogen productivities of 364 and 559NmL H₂ L^-1 were observed for the Rhodobacter sphaeroides and the mixed culture consortium tests, respectively: the consortium of PNSB resulted 1.5-fold more productive than the pure culture. On the other hand, Rhodobacter sphaeroides culture showed a higher PHB productivity (155mg PHB g COD^-1) than the mixed culture (55mg PHB g COD^-1). In all the tests, the concomitant H₂ and PHB production was associated to a dissolved COD removal higher than 80%.

Biohydrogen production from sugarcane bagasse hydrolysate: effects of pH, S/X, Fe2+, and magnetite nanoparticles

Batch dark fermentation experiments were conducted to investigate the effects of initial pH, substrate-to-biomass (S/X) ratio, and concentrations of Fe²⁺ and magnetite nanoparticles on biohydrogen production from sugarcane bagasse (SCB) hydrolysate. By applying the response surface methodology, the optimum condition of steam-acid hydrolysis was 0.64% (v/v) H₂SO₄ for 55.7 min, which obtained a sugar yield of 274 mg g^-1. The maximum hydrogen yield (HY) of 0.874 mol (mol glucose^-1) was detected at the optimum pH of 5.0 and S/X ratio of 0.5 g chemical oxygen demand (COD, g VSS^-1). The addition of Fe²⁺ 200 mg L^-1 and magnetite nanoparticles 200 mg L^-1 to the inoculum enhanced the HY by 62.1% and 69.6%, respectively. The kinetics of hydrogen production was estimated by fitting the experimental data to the modified Gompertz model. The inhibitory effects of adding Fe²⁺ and magnetite nanoparticles to the fermentative hydrogen production were examined by applying Andrew's inhibition model. COD mass balance and full stoichiometric reactions, including soluble metabolic products, cell synthesis, and H₂ production, indicated the reliability of the experimental results. A qPCR-based analysis was conducted to assess the microbial community structure using Enterobacteriaceae, Clostridium spp., and hydrogenase-specific gene activity. Results from the microbial analysis revealed the dominance of hydrogen producers in the inoculum immobilized on magnetite nanoparticles, followed by the inoculum supplemented with Fe²⁺ concentration. Graphical abstract ᅟ.

Hydrogen production by the hyperthermophilic bacterium Thermotoga maritima part I: effects of sulfured nutriments, with thiosulfate as model, on hydrogen production and growth

BACKGROUND

Thermotoga maritima and T. neapolitana are hyperthermophile bacteria chosen by many research teams to produce bio-hydrogen because of their potential to ferment a wide variety of sugars with the highest theoretical H₂/glucose yields. However, to develop economically sustainable bio-processes, the culture medium formulation remained to be optimized. The main aim of this study was to quantify accurately and specifically the effect of thiosulfate, used as sulfured nutriment model, on T. maritima growth, yields and productivities of hydrogen. The results were obtained from batch cultures, performed into a bioreactor, carefully controlled, and specifically designed to prevent the back-inhibition by hydrogen.

RESULTS

Among sulfured nutriments tested, thiosulfate, cysteine, and sulfide were found to be the most efficient to stimulate T. maritima growth and hydrogen production. In particular, under our experimental conditions (glucose 60 mmol L^-1 and yeast extract 1 g L^-1), the cellular growth was limited by thiosulfate concentrations lower than 0.06 mmol L^-1. Under these conditions, the cellular yield on thiosulfate (Y X/Thio) could be determined at 3617 mg mmol^-1. In addition, it has been shown that the limitations of T. maritima growth by thiosulfate lead to metabolic stress marked by a significant metabolic shift of glucose towards the production of extracellular polysaccharides (EPS). Finally, it has been estimated that the presence of thiosulfate in the T. maritima culture medium significantly increased the cellular and hydrogen productivities by a factor 6 without detectable sulfide production.

CONCLUSIONS

The stimulant effects of thiosulfate at very low concentrations on T. maritima growth have forced us to reconsider its role in this species and more probably also in all thiosulfato-reducer hyperthermophiles. Henceforth, thiosulfate should be considered in T. maritima as (1) an essential sulfur source for cellular materials when it is present at low concentrations (about 0.3 mmol g^-1 of cells), and (2) as both sulfur source and detoxifying agent for H₂ when thiosulfate is present at higher concentrations and, when, simultaneously, the pH₂ is high. Finally, to improve the hydrogen production in bio-processes using Thermotoga species, it should be recommended to incorporate thiosulfate in the culture medium.

Concomitant biohydrogen and poly-β-hydroxybutyrate production from dark fermentation effluents by adapted Rhodobacter sphaeroides and mixed photofermentative cultures

This work aimed at investigating concomitant production of biohydrogen and poly-β-hydroxybutyrate (PHB) by photofermentation (PF) using dark fermentation effluents (DFE). An adapted culture of Rhodobacter sphaeroides AV1b (pH 6.5, 24±2°C) achieved H2 and PHB yields of 256 (±2) NmLH2/g Chemical Oxygen Demand (COD) and 273.8mgPHB/gCOD (32.5±3% of the dry cells weight (DCW)), respectively. When a diluted (1:2) DFE medium was applied to the adapted pure and mixed photofermentative culture, the respective H2 yields were 164.0 (±12) and 71.3 (±6) NmLH2/gCOD and the PHB yields were 212.1 (±105.2) and 50.7 (±2.7) mgPHB/gCOD added, corresponding to 24 (±0.7) and 6.3 (±0) % DCW, respectively. The concomitant H2 and PHB production from the PF process gave a good DFE post treatment achieving up to 80% COD removal from the initial DFE.

Enhanced biohydrogen and subsequent biomethane production from sugarcane bagasse using nano-titanium dioxide pretreatment

Nano-titanium dioxide (nanoTiO2) under ultraviolet irradiation (UV) followed by dilute sulfuric acid hydrolysis of sugarcane bagasse was used to enhance the production of biohydrogen and biomethane in a consecutive dark fermentation and anaerobic digestion. Different concentrations of 0.001, 0.01, 0.1 and 1g nanoTiO2/L under different UV times of 30, 60, 90 and 120min were used. Sulfuric acid (2%v/v) at 121°C was used for 15, 30 and 60min to hydrolyze the pretreated bagasse. For acidic hydrolysis times of 15, 30 and 60min, the highest total free sugar values were enhanced by 260%, 107%, and 189%, respectively, compared to samples without nanoTiO2 pretreatment. The highest hydrogen production samples for the same acidic hydrolysis times showed 88%, 127%, and 25% enhancement. The maximum hydrogen production of 101.5ml/g VS (volatile solids) was obtained at 1g nanoTiO2/L and 120min UV irradiation followed by 30min acid hydrolysis.

Preparation and adsorption behaviour of cationic nanoparticles for sugarcane fibre modification

Cationic nanoparticles with a core–shell structure and high zeta potential were prepared by two-step semi-batch emulsion polymerization and pre-emulsification technology using the cationic emulsifier hexadecyl trimethyl ammonium chloride (CTAC).

Characterisation of water hyacinth with microwave-heated alkali pretreatment for enhanced enzymatic digestibility and hydrogen/methane fermentation

Microwave-heated alkali pretreatment (MAP) was investigated to improve enzymatic digestibility and H2/CH4 production from water hyacinth. SEM revealed that MAP deconstructed the lignocellulose matrix and swelled the surfaces of water hyacinth. XRD indicated that MAP decreased the crystallinity index from 16.0 to 13.0 because of cellulose amorphisation. FTIR indicated that MAP effectively destroyed the lignin structure and disrupted the crystalline cellulose to reduce crystallinity. The reducing sugar yield of 0.296 g/gTVS was achieved at optimal hydrolysis conditions (microwave temperature = 190°C, time = 10 min, and cellulase dosage = 5 wt%). The sequentially fermentative hydrogen and methane yields from water hyacinth with MAP and enzymatic hydrolysis were increased to 63.9 and 172.5 mL/gTVS, respectively. The energy conversion efficiency (40.0%) in the two-stage hydrogen and methane cogeneration was lower than that (49.5%) in the one-stage methane production (237.4 mL/gTVS) from water hyacinth with MAP and enzymatic hydrolysis.

Integrative approach to produce hydrogen and polyhydroxybutyrate from biowaste using defined bacterial cultures

Biological production of hydrogen (H2) and polyhydroxybutyrate (PHB) from pea-shell slurry (PSS) was investigated using defined mixed culture (MMC4, composed of Enterobacter, Proteus, Bacillus spp.). Under batch culture, 19.0LH2/kg of PSS (total solid, TS, 2%w/v) was evolved. Using effluent from the H2 producing stage, Bacillus cereus EGU43 could produce 12.4% (w/w) PHB. Dilutions of PSS hydrolysate containing glucose (0.5%, w/v) resulted in 45-75LH2/kg TS fed and 19.1% (w/w) of PHB content. Under continuous culture, MMC4 immobilized on coconut coir (CC) lead to an H2 yield of 54L/kg TS fed and a PHB content of 64.7% (w/w). An improvement of 2- and 3.7-fold in H2 and PHB yields were achieved in comparison to control. This integrative approach using defined set of bacterial strains can prove effective in producing biomolecules from biowastes.