Removal of dorzolamide from biomedical wastewaters with adsorption onto graphite oxide/poly(acrylic acid) grafted chitosan nanocomposite

Bentonite clay reinforced alginate grafted composite hydrogel with remarkable sorptive performance toward removal of methylene green

The rapid industrial progress in today's world has led to an alarming increase in water pollution caused by various contaminants such as synthetic dyes. To address this issue, a new hydrogel sorbent, BC-r-Na-Alg-g-p(NIPAm-co-AAc), was developed by combining bentonite clay, sodium alginate, and poly(N-isopropyl acrylamide-co-acrylic acid) through one-pot free radical polymerization at 60 °C. The developed sorbent was characterized using several analytical techniques including SEM, FTIR, TGA, UTM, and swelling studies. The swelling capacity of the sorbent was observed to increase remarkably with an increase in pH, reaching a maximum of 9664 % at pH 11. In batch mode sorption experiments, the sorbent's performance toward methylene green (MG) was investigated by analysing the effects of contact time, pH, temperature, and concentration. The experimental data were fitted to pseudo-second-order kinetic and Langmuir isotherm models, indicating chemisorption as the dominant interaction mode between the anionic sorbent and cationic MG. However, physisorption may also occur to a lesser extent, indicated by the significant R2 of the pseudo-first-order kinetic and Freundlich isotherm models. Additionally, the sorbent exhibited very little decrease (approximately 5 %) in sorptive performance for six sorption-desorption cycles. Overall, the facile fabrication, excellent swelling (9664 %), promising sorption performance (2573 mg.g-1), and good recyclability (6 cycles) make the developed sorbent a potential candidate for various industrial applications.

High-effective, convenient and environmental-friendly MOFs-chitosan-glyoxal composite film for ceftizoxime adsorption: Behavior and mechanisms

In this work, a novel PCN-222-chitosan-glyoxal (PCN@CSG2) composite film was constructed by loading PCN-222 in chitosan substrate, and used for ceftizoxime adsorption. The results demonstrated that the PCN@CSG not only had excellent adsorption properties for ceftizoxime, but also maintained excellent structural properties in harsh environments (strong acids and alkalis), making it have good recycling performance. Specifically, the adsorption kinetics and isotherms investigation demonstrated that the adsorption process followed the pseudo-second-order kinetic model and Freundlich isotherm model respectively, indicating that it was a multilayer process mainly controlled by chemisorption. The PCN@CSG possesses excellent absorptive capacity of 561.7 mg·g-1 and reaches equilibrium rapidly within 60 min, which is attributed to the structural advantages of PCN-222 and chitosan. The amino, carboxyl and hydroxyl functional groups of PCN-222 provide numbers of active sites and cationic chitin greatly promoted the electrostatic adsorption with negative ceftizoxime. In addition, the PCN@CSG has the advantages of renewable and environment-friendly for the biodegradation of chitosan. After five consecutive adsorption-desorption cycles, the removal rate was still higher than 90 %, confirming the excellent reusability of PCN@CSG. This work provided a great prospect for the design and application of shaped-MOFs composite materials for the removal of cephalosporins in environmental water.

Removal of emergent pollutants: A review on recent updates and future perspectives on polysaccharide-based composites vis-à-vis traditional adsorbents

There is a growing incidence in the presence of emergent pollutants like the pesticides and pharmaceuticals in water bodies. The matter of environmental concern is their synthetic and persistent nature which has resulted in induced toxicity/damaging effect to the vital functioning of the different organs in the aquatic community. Traditional adsorbents have exhibited limitations like low stability and minimum reuse ability. Composites of such adsorbents with polysaccharides have demonstrated distinct features like improved surface area, porosity, adsorptivity; improved reusability and structural integrity; improved mechanical strength, thermal stability when applied for the removal of the emergent pollutants. The biocompatibility and biodegradability of such fabricated composites is established; thereby making the water treatment process cost effective, sustainable and environmentally friendly. The present review has dealt with an in-depth, up-dated literature compilation of traditional as well as polysaccharide based composite adsorbents and addressed their performance evaluation for the removal of pharmaceuticals and pesticides from wastewater. A comparative study has revealed the merits of polysaccharide based composites and discussions have been made with a focus on future research directions in the related area.

A review of novel green adsorbents as a sustainable alternative for the remediation of chromium (VI) from water environments

The presence of heavy metal, chromium (VI), in water environments leads to various diseases in humans, such as cancer, lung tumors, and allergies. This review comparatively examines the use of several adsorbents, such as biosorbents, activated carbon, nanocomposites, and polyaniline (PANI), in terms of the operational parameters (initial chromium (VI) concentration (C_o), temperature (T), pH, contact time (t), and adsorbent dosage) to achieve the Langmuir's maximum adsorption capacity (q_m) for chromium (VI) adsorption. The study finds that the use of biosorbents (fruit bio-composite, fungus, leave, and oak bark char), activated carbons (HCl-treated dry fruit waste, polyethyleneimine (PEI) and potassium hydroxide (KOH) PEI-KOH alkali-treated rice waste-derived biochar, and KOH/hydrochloric acid (HCl) acid/base-treated commercial), iron-based nanocomposites, magnetic manganese-multiwalled carbon nanotubes nanocomposites, copper-based nanocomposites, graphene oxide functionalized amino acid, and PANI functionalized transition metal are effective in achieving high Langmuir's maximum adsorption capacity (q_m) for chromium (VI) adsorption, and that operational parameters such as initial concentration, temperature, pH, contact time, and adsorbent dosage significantly affect the Langmuir's maximum adsorption capacity (q_m). Magnetic graphene oxide functionalized amino acid showed the highest experimental and pseudo-second-order kinetic model equilibrium adsorption capacities. The iron oxide functionalized calcium carbonate (IO@CaCO₃) nanocomposites showed the highest heterogeneous adsorption capacity. Additionally, Syzygium cumini bark biosorbent is highly effective in treating tannery industrial wastewater with high levels of chromium (VI).

Contemporary updates on bioremediation applications of graphene and its composites

Graphene, a 2D single-layered carbon sp² hybrid substance set in a honeycomb network, is widespread in many carbon-based materials. Due to its extraordinary optical, electrical, thermal, mechanical, and magnetic competences as well as its significant specific surface area, it has attracted a lot of interest recently. Synthesizing graphene refers to any process for creating or extracting the material, depending on the desired purity, size, and efflorescence of the finished good. Numerous methods have been employed for graphene synthesis categorized as top-down procedures and bottom-up procedures. Graphene finds its implementations in various industries such as electronics, energy, chemical, transport, defence, and biomedical areas such as accurate biosensing. It has been widely used in water treatment as a binder for organic contaminants and heavy metals. Many researches have fixated on creating various modified graphene, graphene oxide composites, graphene nanoparticle composites and semiconductor hybrids of graphene for contaminant removal from water. In this review, we have tried to address various production methods for graphene and its composites along with their advantages and disadvantages. Furthermore, we have presented a summary on graphene's outstanding immobilization of a variety of contaminants like toxic heavy metals, organic dyes, inorganic pollutants and pharmaceutical wastes. Additionally, a development of graphene-based microbial fuel cell (MFC) has been evaluated in an effort to produce ecological wastewater treatment and bioelectricity.

Preparation of Molybdenum Disulfide with Different Nanostructures and Its Adsorption Performance for Copper (Ⅱ) Ion in Water

The environmental problems in the world are attracting increasing amounts of attention, and heavy metal pollution in the water has become one of the focuses of the ecological environment. Molybdenum disulfide (MoS₂) has excellent adsorption performance because of its extremely high specific surface area and unique active site structure, which has attracted an increasing amount of attention in the field of heavy metal disposal in various types of water. In this paper, two sorts of MoS₂ nanoparticles, spherical and lamellar, were synthesized by different chemical methods. Their morphology and structure were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and a Raman spectrometer. The adsorption properties of two sorts of MoS₂ nanoparticles for copper (Ⅱ) ions in water were investigated by changing the pH value, adsorption time, initial concentration of solution, adsorption temperature, etc. Finally, the adsorption mechanism was analyzed by kinetic, isothermal, and thermodynamic models. The results show that two microstructures of MoS₂ nanoparticles can be used as efficient adsorption materials for removing heavy metal ions from water, although there are differences in adsorption capacity between them, which expands the theoretical basis of heavy metal adsorption in a water environment.

Chitosan-Grafted Polyacrylic Acid-Doped Copper Oxide Nanoflakes Used as a Potential Dye Degrader and Antibacterial Agent: In Silico Molecular Docking Analysis

This study examined the catalytic and bactericidal properties of polymer-doped copper oxide (CuO). For this purpose, a facile co-precipitation method was used to synthesize CuO nanostructures doped with CS-g-PAA. Various concentrations (2, 4, and 6%) of dopants were systematically incorporated into a fixed amount of CuO. The prepared samples were analyzed by different optical, structural, and morphological characterizations. Field emission scanning electron microscopy and transmission electron microscopy micrographs indicated that doping transformed CuO's agglomerated rod-like surface morphology to form nanoflakes. UV-vis spectroscopy revealed that the optical spectra of the samples exhibit a redshift after doping, leading to a decrease in band gap energy from 3.3 to 2.5 eV. The purpose of the study was to test the catalytic activity of pristine and CS-g-PAA doped CuO for the degradation of methylene blue in acidic, basic, and neutral conditions using NaBH4 as a reducing agent in an aqueous medium. Furthermore, antibacterial activity was evaluated against Gram-positive and Gram-negative bacteria, namely, Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). Overall, enhanced bactericidal performance was observed upon doping CS-g-PAA into CuO, i.e., 4.25-6.15 and 4.40-8.15 mm against S. aureus and 1.35-4.20 and 2.25-5.25 mm against E. coli at the lowest and highest doses, respectively. The relevant catalytic and bactericidal action mechanisms of samples are also proposed in the study. Moreover, in silico molecular docking studies illustrated the role of these prepared nanomaterials as possible inhibitors of FabH and FabI enzymes of the fatty acid biosynthetic pathway.

Natural Polymers and Their Nanocomposites Used for Environmental Applications

The aim of this review is to bring together the main natural polymer applications for environmental remediation, as a class of nexus materials with advanced properties that offer the opportunity of integration in single or simultaneous decontamination processes. By identifying the main natural polymers derived from agro-industrial sources or monomers converted by biotechnology into sustainable polymers, the paper offers the main performances identified in the literature for: (i) the treatment of water contaminated with heavy metals and emerging pollutants such as dyes and organics, (ii) the decontamination and remediation of soils, and (iii) the reduction in the number of suspended solids of a particulate matter (PM) type in the atmosphere. Because nanotechnology offers new horizons in materials science, nanocomposite tunable polymers are also studied and presented as promising materials in the context of developing sustainable and integrated products in society to ensure quality of life. As a class of future smart materials, the natural polymers and their nanocomposites are obtained from renewable resources, which are inexpensive materials with high surface area, porosity, and high adsorption properties due to their various functional groups. The information gathered in this review paper is based on the publications in the field from the last two decades. The future perspectives of these fascinating materials should take into account the scale-up, the toxicity of nanoparticles, and the competition with food production, as well as the environmental regulations.

Graphene Oxide-Chitosan Composites for Water Treatment from Copper Cations

This paper considers modern sorption materials for wastewater treatment. The literature data on wastewater treatment with materials based on graphene and chitosan are presented. The production and application of composite sorbents is discussed. It is shown that a promising application of graphene oxide (GO) as a filler enhances the mechanical and sorption properties of the polymer matrix. The biopolymer chitosan (Ch) is a challenging matrix for GO, having unique sorption, chelate-forming, ion-exchange, and complex-forming properties. Composite adsorbents based on graphene oxide and chitosan have a high extraction efficiency of heavy and radioactive metals, dyes, and pharmaceutical compounds dorzolamide and tetracycline. GO-Ch composites with various ratios of chitosan and graphene oxide (2–7%) were formed by drop granulation. The composites obtained were investigated in terms of the ability to extract copper cations from the effluents, and it was shown that the composite having the content of GO:Ch = 55.5:44.5% (by mass in dry granules) had the best sorption and mechanical properties. This sample had high purification efficiency from copper cations (96%) and the required mechanical properties (attrition ≤ 0.4%, grindability ≤ 4%). For this sample, the influence of various factors (pH, sorbent dosage, temperature, and time of sorption) on sorption processes were studied. The best conditions for the sorption processes by the GO-Ch sorbent were determined. The sorbent dosage was 20 g/L, the sorption time was 20 min, and the temperature was 20 ± 2 °C, pH = 7. The adsorption isotherm was plotted and the maximum sorption capacity of copper cations A = 58.5 mg/g was determined. Microstructural and infrared (IR) spectroscopy studies of GO-Ch composites showed the presence of a porous surface and OH- and C=O functional groups. A mechanism for the extraction of copper cations due to physical sorption of the porous surface by GO-Ch composites, and due to chemisorption processes by functional groups, was proposed. The sorption properties for methylene blue and iodine absorption, and the specific surface area of the GO-Ch samples, were determined. The spent sorbent is proposed to be used as a soil improver.

Understanding the factors affecting adsorption of pharmaceuticals on different adsorbents - A critical literature update

Remediation of emerging pharmaceutically active compounds (PhACs) as micropollutants in wastewater is of foremost importance as they can cause extremely detrimental effects on life upon bioaccumulation and generation of drug-resistance microorganisms. Presently used physicochemical treatments, such as electrochemical oxidation, nanofiltration and reverse osmosis, are not feasible owing to high operating costs, incomplete removal of contaminants along with toxic by-products formation. Adsorption with the utilization of facile and efficient nanoparticulate adsorbents having distinctive properties of high surface area, excellent adsorption capacity, ability to undergo surface engineering and good regeneration displays great potential in this aspect along with the incorporation of nanotechnology for effective treatment. The application of such nanosorbents provides optimal performance under a wide range of physicochemical conditions, decreased secondary pollution with reduced mechanical stress along with excellent organic compound sequestration capacity, which in turn improves the quality of potable water in a sustainable way compared to current treatments. The present review intends to consolidate the range of factors that affect the process of adsorption of different PhACs on to various nanosorbents and also highlights the adsorption mechanism aiding in the retrieval.

Adsorptive Removal of Azithromycin Antibiotic from Aqueous Solution by Azolla Filiculoides-Based Activated Porous Carbon

Due to the shortage of freshwater availability, reclaimed water has become an important source of irrigation water. Nevertheless, emergent contaminants such as antibiotics in reclaimed water can cause potential health risks because antibiotics are nonbiodegradable. In this paper, we report the adsorptive removal of azithromycin (AZM) antibiotics using activated porous carbon prepared from Azolla filiculoides (AF) (AFAC). The influence of the adsorption process variables, such as temperature, pH, time, and adsorbent dosage, is investigated and described. The prepared AFAC is very effective in removing AZM with 87% and 98% removal after the treatment of 75 min, at 303 and 333 K, respectively. The Langmuir, Temkin, Freundlich, and Dubinin–Radushkevich isotherm models were used to analyze the adsorption results. The Freundlich isotherm was best to describe the adsorption isotherm. The adsorption process follows second-order pseudo kinetics. The adsorption was endothermic (ΔH°= 32.25 kJ/mol) and spontaneous (ΔS° = 0.128 kJ/mol·K). Increasing the temperature from 273 to 333 K makes the process more spontaneous (ΔG° = −2.38 and −8.72 KJ/mol). The lower mean square energy of 0.07 to 0.845 kJ/mol confirms the process’ physical nature. The results indicate that AFAC can be a potential low-cost adsorbent of AZM from aqueous solutions.

Nano-adsorbents an effective candidate for removal of toxic pharmaceutical compounds from aqueous environment: A critical review on emerging trends

Advancements in medical research has resulted in the modernization of healthcare facilities, subsequently leading to a higher level of production and usage of pharmaceuticals to sustain better quality of life. Pharmaceutical active compounds (PhACs) possess high genotoxicity and eco-toxicity thus presenting numerous side effects to living beings on long-term exposure. The fate and toxicity of PhACs were explored in detail, aiming to elucidate their occurrence and transmission in wastewater treatment systems (WWTPs). Adsorption of pharmaceutical compounds using Nano-adsorbents has gained momentum in recent years owing to their low-cost, high surface area and effectiveness. This review has been conducted in order to widen the utilization of Nano adsorbents in the adsorption of pharmaceutical compounds with a focus on the aqueous environment. The synthesis routes and properties of Nano-adsorbents for removal of PhACs were assessed in a comprehensive way. The recovery and reuse ability of nano-adsorbents also forms an integral part of its application in the removal of PhACs and has hence been delineated.

Utilization of MWCNTs/Al2O3 as adsorbent for ciprofloxacin removal: equilibrium, kinetics and thermodynamic studies

In the present study, the adsorption behavior of ciprofloxacin (CIP) from aqueous solution onto MWCNTs/Al₂O₃ was studied using batch experiments. Physical characterization of MWCNTs/Al₂O₃ was determined by SEM, XRD, and BET. The effective parameters investigated included: initial CIP concentration, contact time, MWCNTs/Al₂O₃ mass, and temperature. Based on experimental results and correlation coefficients, the rate of CIP adsorption followed the pseudo-second-model kinetics. Complete compatibility of the adsorption isotherm process was achieved with the Langmuir model, and the maximum adsorption capacity reached 41.73 mg/g under the optimized conditions (pH = 7, MWCNTs/Al₂O₃ dose = 1.2 g/L, contact time = 60 min, initial concentration = 10 mg/L, and temperature= 45 °C). The adsorption capacities based on the Langmuir model at different temperatures, 273, 288, 303, and 318 K, were equal to 72.18, 75.92, 79.65, and 83.47 mg/g, respectively. The determined parameters of the thermodynamic studies demonstrated the endothermic and spontaneous nature of the biosorption. The mean free energy was estimated from D-R isotherm model to be 0.316-0.707 KJ/mol, which clearly proved that the adsorption experiment followed a physical process. The data suggest that MWCNTs/Al₂O₃ could be used as a highly effective adsorbent material with a high capacity for the removal of antibiotics from water and wastewater.

Adsorption, degradation, and mineralization of emerging pollutants (pharmaceuticals and agrochemicals) by nanostructures: a comprehensive review

This review discusses a fresh pool of research findings reported on the multiple roles played by metal-based, magnetic, graphene-type, chitosan-derived, and sonicated nanoparticles in the treatment of pharmaceutical- and agrochemical-contaminated waters. Some main points from this review are as follows: (i) there is an extensive number of nanoparticles with diverse physicochemical and morphological properties which have been synthesized and then assessed in their respective roles in the degradation and mineralization of many pharmaceuticals and agrochemicals, (ii) the exceptional removal efficiencies of graphene-based nanomaterials for different pharmaceuticals and agrochemicals molecules support arguably well a high potential of these nanomaterials for futuristic applications in remediating water pollution issues, (iii) the need for specific surface modifications and functionalization of parent nanostructures and the design of economically feasible production methods of such tunable nanomaterials tend to hinder their widespread applicability at this stage, (iv) supplementary research is also required to comprehensively elucidate the life cycle ecotoxicity characteristics and behaviors of each type of engineered nanostructures seeded for remediation of pharmaceuticals and agrochemicals in real contaminated media, and last but not the least, (v) real wastewaters are extremely complex in composition due to the mix of inorganic and organic species in different concentrations, and the presence of such mixed species have different radical scavenging effects on the sonocatalytic degradation and mineralization of pharmaceuticals and agrochemicals. Moreover, the formulation of viable full-scale implementation strategies and reactor configurations which can use multifunctional nanostructures for the effective remediation of pharmaceuticals and agrochemicals remains a major area of further research.

Microencapsulation of Fluticasone Propionate and Salmeterol Xinafoate in Modified Chitosan Microparticles for Release Optimization

Chitosan (CS) is a natural polysaccharide, widely studied in the past due to its unique properties such as biocompatibility, biodegradability and non-toxicity. Chemical modification of CS is an effective pathway to prepare new matrices with additional functional groups and improved properties, such as increment of hydrophilicity and swelling rate, for drug delivery purposes. In the present study, four derivatives of CS with trans-aconitic acid (t-Acon), succinic anhydride (Succ), 2-hydroxyethyl acrylate (2-HEA) and acrylic acid (AA) were prepared, and their successful grafting was confirmed by FTIR and ¹H-NMR spectroscopies. Neat chitosan and its grafted derivatives were fabricated for the encapsulation of fluticasone propionate (FLU) and salmeterol xinafoate (SX) drugs, used for chronic obstructive pulmonary disease (COPD), via the ionotropic gelation technique. Scanning electron microscopy (SEM) micrographs demonstrated that round-shaped microparticles (MPs) were effectively prepared with average sizes ranging between 0.4 and 2.2 μm, as were measured by dynamic light scattering (DLS), while zeta potential verified in all cases their positive charged surface. FTIR spectroscopy showed that some interactions take place between the drugs and the polymeric matrices, while X-ray diffraction (XRD) patterns exhibited that both drugs were encapsulated in MPs’ interior with a lower degree of crystallinity than the neat drugs. In vitro release studies of FLU and SX exposed a great amelioration in the drugs’ dissolution profile from all modified CS’s MPs, in comparison to those of neat drugs. The latter fact is attributed to the reduction in crystallinity of the active substances in the MPs’ interior.

Biomass Schiff base polymer-derived N-doped porous carbon embedded with CoO nanodots for adsorption and catalytic degradation of chlorophenol by peroxymonosulfate

The development of highly active and multifunctional carbocatalysts modified with heteroatoms or metal species is crucial for practical environmental remediation applications. In this study, nitrogen-doped porous carbon embedded with highly dispersed CoO nanodots (CoO-N-C) was successfully prepared from a biomass-derived Schiff base polymer for the first time. The morphology analysis shows that CoO nanodots were embedded in the N doped carbon layer with size of ∼6.5 nm. CoO-N-C catalyst exhibited excellent 4-CP adsorption efficiency as well as excellent catalytic performance in the activation of peroxymonosulfate (PMS) for 4-CP degradation. Total organic carbon (TOC) removal was close to 99.7% and involved a combination of adsorption and degradation processes. Singlet oxygen (¹O₂) was found to be the dominant oxidative species for 4-CP degradation. The underlying mechanism of these processes were elucidated, and it was found that the introduction of CoO nanodots in CoO-N-C not only enhanced radical catalytic processes, but also significantly enhanced the non-radical catalytic processes of PMS activation. This derived from the synergistic effect between the embedded CoO nanodots and doped nitrogen for the increase of electron density on carbon surface of catalyst, thereby accelerating the electron transfer process for PMS activation and improving the catalytic performance.

Magnetic Template Anion Polyacrylamide-Polydopamine-Fe3O4 Combined with Ultraviolet/H2O2 for the Rapid Enrichment and Degradation of Diclofenac Sodium from Aqueous Environment

In this study, a novel system was set up by preparing a magnetic flocculant combining with ultraviolet/H₂O₂ to realize the rapid enrichment and degradation of diclofenac sodium (DCFS). For the magnetic flocculant, template anion polyacrylamide (TAPAM) with anion micro-block structure was prepared. Thereafter, polydopamine was used to modify TAPAM, Fe₃O₄ nanoparticles was grafted to the modified TAPAM by chelation, named template anion polyacrylamide-polydopamine-Fe₃O₄ (TAPAM-PDA-Fe₃O₄). Furthermore, the TAPAM-PDA-Fe₃O₄ preparation protocol was optimized by the response surface method (RSM). In the DCFS enrichment section, the rapid separation of flocs from water was realized by an external magnetic field and it indicated that the π–π stacking effect was dominant in neutral/alkaline condition, whereas charge neutralization was favored in acidic conditions. Meanwhile, a DCFS enrichment kinetic curve was much fitted by the pseudo-second-order kinetic model and DCFS enrichment isothermal curve was close to the Freundlich isothermal model, indicating the dependence of DCFS quantity enriched by TAPAM-PDA-Fe₃O₄ and a multilayer heterogeneous enrichment process. The degradation experiment confirmed that DCFS was effectively degraded by ultraviolet/H₂O₂/TAPAM-PDA-Fe₃O₄ and the maximum value of DCFS degradation efficiency reached 98.1%. Furthermore, the regeneration experiment showed that the enrichment and degradation efficiency of DCFS could maintain a relatively high level in the initial three recycles.

Self-assembly of sponge-like kaolin/chitosan/reduced graphene oxide composite hydrogels for adsorption of Cr(VI) and AYR

The assembly of graphene oxide with biomass or polymers to form 3D hydrogels with excellent mechanical properties has become a research hotspot. In this work, the sponge-like kaolin/chitosan (CS)/reduced graphene oxide (rGO) composite was prepared for adsorption by simple self-assembly without cross-linking agent. The morphology, composition, surface properties, and pore size of as-prepared materials were characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), zeta potential analyzer, Brunauer-Emmett-Teller surface area measurement (BET), and scanning electron microscopy (SEM). The effects of raw material ratio, contact time, temperature, pH, ionic strength, and recycling times on adsorption performance were investigated in detail. The results indicate that the composite has good absorption capacity for Cr(VI) and alizarin yellow R (AYR). Besides, composite hydrogel also exhibits excellent flexibility and good repeatability, which confirms its great potential as an adsorbent to remove pollutants in the water environment.

Synthesis of Three-Dimensional Graphene-Based Hybrid Materials for Water Purification: A Review

Graphene-based nanostructures and nanomaterials have been widely used for the applications in materials science, biomedicine, tissue engineering, sensors, energy, catalysis, and environmental science due to their unique physical, chemical, and electronic properties. Compared to two-dimensional (2D) graphene materials, three-dimensional (3D) graphene-based hybrid materials (GBHMs) exhibited higher surface area and special porous structure, making them excellent candidates for practical applications in water purification. In this work, we present recent advances in the synthesis and water remediation applications of 3D GBHMs. More details on the synthesis strategies of GBHMs, the water treatment techniques, and the adsorption/removal of various pollutants from water systems with GBHMs are demonstrated and discussed. It is expected that this work will attract wide interests on the structural design and facile synthesis of novel 3D GBHMs, and promote the advanced applications of 3D GBHMs in energy and environmental fields.

Chitosan-based sorbent for efficient removal and extraction of ciprofloxacin and norfloxacin from aqueous solutions

Nanosheets prepared from magnesium oxide, chitosan and graphene oxide (MgO/Chit/GO) were hydrothermally synthesized and used as a sorbent for removal of ciprofloxacin and norfloxacin from aqueous solutions. Residual antibiotics in sample were determined by HPLC/UV instrument. The sorbent was characterized by FTIR, XRD, BET, SEM, and TEM. Its high adsorption capacity is attributed to the high surface area (294 m².g^-1) as compared to bare MgO/chit or bare GO. The pore size of the mesoporous sorbent typically is 15 Å. The adsorption isotherms for the two model antibiotics studied (norfloxacin, ciprofloxacin) can be described with the Langmuir model, and the maximum adsorption capacities are 1111 and 1000 mg.g^-1 for ciprofloxacin and norfloxacin, respectively. The analysis of the kinetic data revealed that the synthesized sorbent followed pseudo-second-order kinetics and the maximum equilibrium was at over 120 and 150 min for ciprofloxacin and norfloxacin, respectively. Therefore, it is introduced as an economical, eco- friendly, and high-performance sorbent for removal of antibiotics from aqueous solutions. Graphical abstract Schematic presentation of dispersion of magnesium oxide/chitosan/graphene oxide (MgO/chit/GO) nanosheets in waste water for removal of ciprofloxacin and norfloxacin as water pollutants.

Nanomaterials and Chemical Modifications for Enhanced Key Wood Properties: A Review

This work briefly reviews the research milestones in the area of wood chemical modification, focusing on acetylated and furfurylated wood which have been scaled up, and exploits the solutions that nanotechnology can offer to wood protection as an alternative green innovative approach in improving key wood properties, namely the dimensional stability when subjected to a fluctuating moisture content and a susceptibility to biodegradability by microorganisms. Recently, nanomaterials were found to be able applicable in wood science. The target is to improve some special physicochemical characteristics of wood in order to resist extreme conditions (climate, bacteria, etc.), giving an enhanced potentiality. It is well-established that the wood cell wall shows a porosity of molecular scale dimensions; this is caused by the partial filling of spaces between the microfibrils of the cellulose mainly by polyoses and lignin. The small-sized nanoparticles can deeply and effectively penetrate into the wood, altering its surface chemistry, improving its properties, and therefore, resulting in a hyper-performance product.

Synthesis and response of pineapple peel carboxymethyl cellulose-g-poly (acrylic acid-co-acrylamide)/graphene oxide hydrogels

Developing biomaterials derived from the renewable resources is an effective and sustainable approach to address environmental and resource issues. Herein, hydrogels were synthesized by grafting copolymerization of acrylic acid and acrylamide onto pineapple peel carboxymethyl cellulose with incorporation of graphene oxide (GO). The structure, swelling, and multiple responses to salt, pH and organic solvents were investigated. The incorporation of GO resulted in a higher cross-linking density of the network and thus decreased the swelling ability. Expansion of the hydrogels occurred at high pH, whereas shrinkage occurred at low pH or in salt solutions and organic solvents/water mixtures, exhibiting multiple responses to pH, salt and organic solvents. Moreover, the hydrogels showed a selective adsorption behavior to various dyes and the incorporation of GO enhanced the adsorption performance. The above results may allude several potential applications of the hydrogels, such as adsorption, smart actuators and drug release fields.

Chitin/Chitosan: Versatile Ecological, Industrial, and Biomedical Applications

Chitin is a linear polysaccharide of N-acetylglucosamine, which is highly abundant in nature and mainly produced by marine crustaceans. Chitosan is obtained by hydrolytic deacetylation. Both polysaccharides are renewable resources, simply and cost-effectively extracted from waste material of fish industry, mainly crab and shrimp shells. Research over the past five decades has revealed that chitosan, in particular, possesses unique and useful characteristics such as chemical versatility, polyelectrolyte properties, gel- and film-forming ability, high adsorption capacity, antimicrobial and antioxidative properties, low toxicity, and biocompatibility and biodegradability features. A plethora of chemical chitosan derivatives have been synthesized yielding improved materials with suggested or effective applications in water treatment, biosensor engineering, agriculture, food processing and storage, textile additives, cosmetics fabrication, and in veterinary and human medicine. The number of studies in this research field has exploded particularly during the last two decades. Here, we review recent advances in utilizing chitosan and chitosan derivatives in different technical, agricultural, and biomedical fields.

Synthesis of novel modified magnetic chitosan particles and their adsorption performance toward Cr(VI)

Novel adsorbents, poly([2-(methacryloxy)ethyl]trimethylammonium chloride) modified magnetic chitosan particles (DMCPs), were synthesized via free radical polymerization and applied to adsorb Cr(VI) from aqueous solution. The effects of pH (2-11), Cr(VI) concentration (10-200 mg/L) and contact time (0-420 min) on the adsorption performance were evaluated. The results showed that the adsorption capacity of DMCPs was much larger than that of magnetic chitosan particles (MCPs) in the examined pH range and decreased with Cl^- concentration increasing, indicating that electrostatic interaction and ion exchange are the governing mechanisms of Cr(VI) adsorption by DMCPs. The Langmuir isotherm model and pseudo-second-order kinetic model fitted the experimental data well. The maximum adsorption capacity of DMCPs is 153.85 mg/g. Besides, Cr(VI)-loaded DMCPs could be easily separated and efficiently regenerated. Therefore, DMCPs are promising candidates for Cr(VI) adsorption owing to their excellent performance in a wide pH range, easy separation and good reusability.

A Novel Adsorbent Magnetic Graphene Oxide Modified with Chitosan for the Simultaneous Reduction of Mycotoxins

A novel magnetic graphene oxide modified with chitosan (MGO-CTS) was synthesised as an adsorbent aimed to examine the simultaneous removal of mycotoxins. The composite was characterised by various procedures, namely Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and a scanning electron microscope (SEM). The adsorption evaluation was considered via pH effects, initial mycotoxin concentration, adsorption time and temperature. Adsorption isotherm data and kinetics experiments were acquired at the optimum pH 5 fit Freundlich isotherm as well as pseudo-second-order kinetic models. The thermodynamic results indicated that the adsorption of the mycotoxins was spontaneous, endothermic and favourable.

Review on recent progress in chitosan-based hydrogels for wastewater treatment application

Recently, chitosan has been used as a raw material for synthesis of hydrogels in a wide range of potential and practical applications like wastewater treatment, drug delivery, and tissue engineering. This review represents an overview of the application of chitosan-based hydrogels for wastewater treatment and helps researchers to better understand the potential of these adsorbents for wastewater treatment. It covers recently used and prospected methods for synthesis and modification of these hydrogels. Chitosan-based hydrogels are modified physically and chemically through crosslinking, grafting, impregnation, incorporating of hard fillers, blending, interpenetrating, and ion-imprinting methods to improve adsorption and mechanical properties. Understanding of these methods provides useful information in the design of efficient chitosan-based hydrogels and the select of appropriate pollutants for removal. This review provides a brief outlook on future prospects of chitosan-based hydrogels for wastewater application.

Synthesis and characterization of the removal of organic pollutants in effluents

The use of a large number of organic pollutants results in the accumulation of effluents at the places of production and the environment. These substances are, therefore, dangerous for living organisms and can cause heavy environmental damage. Hence, to cure these problems certain methods were used for the elimination of organic effluents. Indeed, the methods of elimination through magnetic adsorption and/or separation prove to be effective in the treatment of certain wastes, but the effectiveness of each one of these methods depends on several characteristics and also present limitations according to the pollutants they adsorb. This review examines on the one hand the capacity of certain elements of these methods in the elimination of certain pollutants and on the other hand the advantages and limits of these methods. Elements like biochars, biosorbents and composite materials are used due to their very strong porosity which makes it possible for them to develop an important contact surface with the external medium, at low costs, and the possibility of producing them from renewable sources. The latter still run up however against the problems of formation of mud and regeneration. Depollution by magnetic separation is also used due to its capacity to mitigate the disadvantages of certain methods which generally lead to the formation of mud and overcoming also the difficulties like obtaining an active material and at the same time being able to fix the pollutants present in the effluents to treat and sensitize them to external magnetic fields.

Removal of emerging contaminants from the environment by adsorption

Emerging contaminants (EC's) are pollutants of growing concern. They are mainly organic compounds such as: pesticides, pharmaceuticals and personal care products, hormones, plasticizers, food additives, wood preservatives, laundry detergents, surfactants, disinfectants, flame retardants, and other organic compounds that were found recently in natural wastewater stream generated by human and industrial activities. A majority of ECs does not have standard regulations and could lead to lethal effects on human and aquatic life even at small concentrations. The conventional primary and secondary water treatment plants do not remove or degrade these toxic pollutants efficiently and hence need cost effective tertiary treatment method. Adsorption is a promising method worldwide for EC removal since it is low initial cost for implementation, highly-efficient and has simple operating design. Research has shown that the application of different adsorbents such as, activated carbons(ACs), modified biochars (BCs), nanoadsorbents (carbon nanotubes and graphene), composite adsorbents, and other are being used for EC's removal from water and wastewater. The current review intends to investigate adsorption process as an efficient method for the treatment of ECs. The mechanism of adsorption has also been discussed.

Polyaniline-based adsorbents for removal of hexavalent chromium from aqueous solution: a mini review

Hexavalent chromium (Cr(VI)) is a common hazardous contaminant in the environment and carcinogenic or mutagenic to aquatic animals and human beings. Therefore, the removal and detoxification of Cr(VI) have been attracting increasing attention of researchers. Among various conducting polymers, polyaniline (PANI)-based adsorbents have shown an excellent performance on the removal of Cr(VI) because of their redox properties, eased synthesis, and favorable biocompatibility. In this review, the characteristics of various PANI-based adsorbents were described, including PANI-modified nanofiber mats and membranes, PANI/bio-adsorbents, PANI/magnetic adsorbents, PANI/carbon adsorbents, PANI-modified clay composites, and PANI-inorganic hybrid composites. The mechanisms for the detoxification and adsorption of Cr(VI) were also discussed. The results indicated the potential applications of PANI-based adsorbents for the removal of Cr(VI). Graphical abstract ᅟ.

The role of graphene oxide and graphene oxide-based nanomaterials in the removal of pharmaceuticals from aqueous media: a review

In this review paper, the ill effects of pharmaceuticals (PhAs) on the environment and their adsorption on graphene oxide (GO) and graphene oxide-based (GO-based) nanomaterials have been summarised and discussed. The adsorption of prominent PhAs discussed herein includes beta-blockers (atenolol and propranolol), antibiotics (tetracycline, ciprofloxacin and sulfamethoxazole), pharmaceutically active compounds (carbamazepine) and analgesics such as diclofenac. The adsorption of PhAs strictly depends upon the experimental conditions such as pH, adsorbent and adsorbate concentrations, temperature, ionic strength, etc. To understand the adsorption mechanism and feasibility of the adsorption process, the adsorption isotherms, thermodynamics and kinetic studies were also considered. Except for some cases, GO and its derivatives show excellent adsorption capacities for PhAs, which is crucial for their applications in the environmental pollution cleanup.