Enhanced bioelectricity generation by improving pyocyanin production and membrane permeability through sophorolipid addition in Pseudomonas aeruginosa-inoculated microbial fuel cells

Engineering extracellular electron transfer pathways of electroactive microorganisms by synthetic biology for energy and chemicals production

The excessive consumption of fossil fuels causes massive emission of CO2, leading to climate deterioration and environmental pollution. The development of substitutes and sustainable energy sources to replace fossil fuels has become a worldwide priority. Bio-electrochemical systems (BESs), employing redox reactions of electroactive microorganisms (EAMs) on electrodes to achieve a meritorious combination of biocatalysis and electrocatalysis, provide a green and sustainable alternative approach for bioremediation, CO2 fixation, and energy and chemicals production. EAMs, including exoelectrogens and electrotrophs, perform extracellular electron transfer (EET) (i.e., outward and inward EET), respectively, to exchange energy with the environment, whose rate determines the efficiency and performance of BESs. Therefore, we review the synthetic biology strategies developed in the last decade for engineering EAMs to enhance the EET rate in cell-electrode interfaces for facilitating the production of electricity energy and value-added chemicals, which include (1) progress in genetic manipulation and editing tools to achieve the efficient regulation of gene expression, knockout, and knockdown of EAMs; (2) synthetic biological engineering strategies to enhance the outward EET of exoelectrogens to anodes for electricity power production and anodic electro-fermentation (AEF) for chemicals production, including (i) broadening and strengthening substrate utilization, (ii) increasing the intracellular releasable reducing equivalents, (iii) optimizing c-type cytochrome (c-Cyts) expression and maturation, (iv) enhancing conductive nanowire biosynthesis and modification, (v) promoting electron shuttle biosynthesis, secretion, and immobilization, (vi) engineering global regulators to promote EET rate, (vii) facilitating biofilm formation, and (viii) constructing cell-material hybrids; (3) the mechanisms of inward EET, CO2 fixation pathway, and engineering strategies for improving the inward EET of electrotrophic cells for CO2 reduction and chemical production, including (i) programming metabolic pathways of electrotrophs, (ii) rewiring bioelectrical circuits for enhancing inward EET, and (iii) constructing microbial (photo)electrosynthesis by cell-material hybridization; (4) perspectives on future challenges and opportunities for engineering EET to develop highly efficient BESs for sustainable energy and chemical production. We expect that this review will provide a theoretical basis for the future development of BESs in energy harvesting, CO2 fixation, and chemical synthesis.

Filamentous marine Gram-positive Nocardiopsis dassonvillei biofilm as biocathode and its electron transfer mechanism

This study investigated electrochemical characteristics of Gram-positive, Nocardiopsis dassonvillei B17 facultative bacterium in bioelectrochemical systems. The results demonstrated that anodic and cathodic reaction rates were catalyzed by this bacterium, especially by utilization of aluminium alloy as a substrate. Cyclic voltammogram results depicted an increase of peak current and surface area through biofilm development, confirming its importance on catalysis of redox reactions. Phenazine derivatives were detected and their electron mediating behavior was evaluated exogenously. A symmetrical redox peak in the range of -59 to -159 mV/SHE was observed in cyclic voltammogram of bacterial solution supplemented with 12 μM phenazine, a result consistent with cyclic voltammogram of a 5-d biofilm, confirming its importance as an electron mediator in extracellular electron transfer. Furthermore, the dependency of bacterial catalysis and polarization potential were studied. These results suggested that B17 biofilm behaved as a biocathode and transferred electrons to bacterial cells through a mechanism associated with electron mediators.

Carbon dioxide reduction to high-value chemicals in microbial electrosynthesis system: Biological conversion and regulation strategies

Large emissions of atmospheric carbon dioxide (CO2) are causing climatic and environmental problems. It is crucial to capture and utilize the excess CO2 through diverse methods, among which the microbial electrosynthesis (MES) system has become an attractive and promising technology to mitigate greenhouse effects while reducing CO2 to high-value chemicals. However, the biological conversion and metabolic pathways through microbial catalysis have not been clearly elucidated. This review first introduces the main acetogenic bacteria for CO2 reduction and extracellular electron transfer mechanisms in MES. It then intensively analyzes the CO2 bioconversion pathways and carbon chain elongation processes in MES, together with energy supply and utilization. The factors affecting MES performance, including physical, chemical, and biological aspects, are summarized, and the strategies to promote and regulate bioconversion in MES are explored. Finally, challenges and perspectives concerning microbial electrochemical carbon sequestration are proposed, and suggestions for future research are also provided. This review provides theoretical foundation and technical support for further development and industrial application of MES for CO2 reduction.

Enhancement of Electricity Production in Microbial Fuel Cells Using a Biosurfactant-Producing Co-Culture

Microbial fuel cells are bio-electrochemical devices that enable the conversion of chemical energy into bioelectricity. In this manuscript, the use of biosurfactants (Tween 80 and surfactin) and the effect of coculturing E. coli and L. plantarum were used to investigate the generation of bioelectricity coming from an H-type microbial fuel cell. In this setup, E. coli acts as an electron donor while L. plantarum acts as an in situ biosurfactant producer. It was observed that the use of exogenous surfactants enhanced electricity production compared to conventional E. coli cultures. The utilization of Tween 80 and surfactin increased the power generation from 204 µW m-2 to 506 µW m-2 and 577 µW m-2, respectively. Furthermore, co-culturing E. coli and L. plantarum also resulted in a higher power output compared to pure cultures (132.8% more when compared to using E. coli alone and 68.1% more when compared to using L. plantarum alone). Due to the presence of surfactants, the internal resistance of the cell was reduced. The experimental evidence collected here clearly indicates that the production of endogenous surfactants, as well as the addition of exogenous surfactants, will enhance MFC electricity production.

Sludge source-redox mediators obtainment and availability for enhancing bioelectrogenesis and acidogenesis: Deciphering characteristics and mechanisms

Anaerobic biological treatment was regarded as one of promising options for realizing concurrent WAS reduction, stabilization and bioenergy/bioresource recycle. But the relatively low treatment efficiency limited its spreading application toward larger scale considerably in China. Aimed at such barrier, this study offered a novel enhancing strategy for achieving high-efficiency of bioenergy/bioresource recycle from WAS anaerobic treatment via improving bioelectrogenesis/acidogenesis using sludge source-redox mediators (SSRMs). SSRMs not only facilitated bioeletrogenesis with an increasing efficiency of 36% for voltage output and 39% for bioelectricity bioconversion, but also enhanced acidogenesis of WAS with a mean elevating efficiency of 37.5% of volatile fatty acids (VFAs) production within 5 d Mechanistic investigations indicated that SSRMs had a potential influence on improving the protein and carbohydrate metabolisms-related genes' expression for enhancing bioelectrogenesis and acidogenesis. Moreover, SSRMs exerted roles of electrochemical "catalysts" or as terminal electron acceptors with affecting functional proteins of complexes of Ⅰ and Ⅳ in electron transfer chains for improving electron transfer efficiency. Meanwhile, the core members' abundance, microbial diversity and community distributive evenness were prompted concurrently for carrying out superior bioelectrogenesis and acidogenesis. A schematic illustration was established for demonstrating the mechanism of SSRMs for enhancing bioelectrogenesis and acidogenesis via changing microbial metabolism functions, enhancing electron transfer efficiency, and regulating functional genes' expression of functional proteins (up-regulating cytochrome c oxidase and down-regulating-NADH dehydrogenase). This study provided an effective enhancing strategy for facilitating WAS bioconversion to bioenergy/bioresource with well-process sustainability.

The two faces of pyocyanin - why and how to steer its production?

The ambiguous nature of pyocyanin was noted quite early after its discovery. This substance is a recognized Pseudomonas aeruginosa virulence factor that causes problems in cystic fibrosis, wound healing, and microbiologically induced corrosion. However, it can also be a potent chemical with potential use in a wide variety of technologies and applications, e.g. green energy production in microbial fuel cells, biocontrol in agriculture, therapy in medicine, or environmental protection. In this mini-review, we shortly describe the properties of pyocyanin, its role in the physiology of Pseudomonas and show the ever-growing interest in it. We also summarize the possible ways of modulating pyocyanin production. We underline different approaches of the researchers that aim either at lowering or increasing pyocyanin production by using different culturing methods, chemical additives, physical factors (e.g. electromagnetic field), or genetic engineering techniques. The review aims to present the ambiguous character of pyocyanin, underline its potential, and signalize the possible further research directions.

An electricity-generating bacterium separated from oil sludge microbial fuel cells and its environmental adaptability

Electricity-generating bacteria as biocatalysts for microbial fuel cells (MFCs), their species, and power generation performance determine the pollution control and power generation performance of MFCs. And there are few studies on the types and performance of electricity-generating bacteria isolated from oily sludge microbial fuel cells. For improving the power generation performance of oily sludge MFCs, an electricity-generating bacterium was isolated from the oily sludge. More importantly, the adaptability of nitrogen to phosphorus ratio, temperature, and pH of the electricity-generating bacteria were adjusted by a controlled variable method. The results of this study showed that the electricity-generating bacterium was identified as Bacillus cereus, with a rod-shaped cell, about 0.5-1.0 μm in length. The optimal nitrogen-phosphorus ratio, temperature, and pH of MFCs were 4.67:1, 25 ℃, and pH = 7, respectively. Its maximum power density, COD, and oil removal rate was up to 65 mW·m^-3, 90.51%, and 87.76%, respectively. The study of this functional bacterium will provide beneficial assistance for the improvement of oil removal and power generation performance of oily sludge MFCs.

The Influence of Hydrodynamic Conditions in a Laboratory-Scale Bioreactor on Pseudomonas aeruginosa Metabolite Production

Hydrodynamic conditions are critical in bioprocessing because they influence oxygen availability for cultured cells. Processes in typical laboratory bioreactors need optimization of these conditions using mixing and aeration control to obtain high production of the desired bioproduct. It could be done by experiments supported by computational fluid dynamics (CFD) modeling. In this work, we characterized parameters such as mixing time, power consumption and mass transfer in a 2 L bioreactor. Based on the obtained results, we chose a set of nine process parameters to test the hydrodynamic impact on a selected bioprocess (mixing in the range of 0-160 rpm and aeration in the range of 0-250 ccm). Therefore, we conducted experiments with P. aeruginosa culture and assessed how various hydrodynamic conditions influenced biomass, pyocyanin and rhamnolipid production. We found that a relatively high mass transfer of oxygen (k_La = 0.0013 s^-1) connected with intensive mixing (160 rpm) leads to the highest output of pyocyanin production. In contrast, rhamnolipid production reached maximal efficiency under moderate oxygen mass transfer (k_La = 0.0005 s^-1) and less intense mixing (in the range of 0-60 rpm). The results indicate that manipulating hydrodynamics inside the bioreactor allows control of the process and may lead to a change in the metabolites produced by bacterial cells.

Maximizing electron flux, microbial diversity and gene abundance in MFC powered electro-Fenton system by optimizing co-addition of lysozyme and 2-bromoethanesulfonate

In this study, a microbial fuel cell powered electro-Fenton system (MFCⓅEFs) was established in order to overcome the shortcomings of low electron flux and unexpected methane production, while simultaneously treating excess sludge (ES, substrate) and refractory syringic acid (SA). A strategy of co-adding lysozyme (LZ, as ES degradation catalyst) and 2-bromoethanesulfonate (BES, as methane inhibitor) into ES was optimized in MFCⓅEFs to maximize electron flux, microbial community diversity and functional gene abundance. The removal of sludge total chemical oxygen demand (TCOD) achieved 81.69% in 25 d under an optimal co-addition strategy (40.41 mg/gSS of LZ, 27.03 mmol/L of BES, adding on 22.8 h of the7th day), with a simultaneous high degradation of SA (99.30% in 25 h). Correspondingly, a maximum power density of 3.35 W/m³ was achieved (only 0.62 W/m³ from the control), which effectively realizes in-situ micro-electricity generation and utilization for bioelectric Fenton processes. Moreover, 42.25% of the total charges were employed for bio-electricity generation. The electricigens of Pseudomonas, Acinetobacter and Chlorobium showed effective enrichment, while the abundance of methanogenesis archaea was extremely decreased. Functional genes associated with methanogenesis including mtaA, hdra, and mcrA were effectively inhibited. The life cycle assessment along with an optimized co-addition strategy illustrated a beneficial environmental effect, particularly in terms of ecosystem quality and climate change. Above all, an enhanced synchronous degradation of excess sludge and refractory pollutants had been realized in a green and environmentally friendly way.

Genome-Scale Mutational Analysis of Cathode-Oxidizing Thioclava electrotropha ElOx9T

Extracellular electron transfer (EET) – the process by which microorganisms transfer electrons across their membrane(s) to/from solid-phase materials – has implications for a wide range of biogeochemically important processes in marine environments. Though EET is thought to play an important role in the oxidation of inorganic minerals by lithotrophic organisms, the mechanisms involved in the oxidation of solid particles are poorly understood. To explore the genetic basis of oxidative EET, we utilized genomic analyses and transposon insertion mutagenesis screens (Tn-seq) in the metabolically flexible, lithotrophic Alphaproteobacterium Thioclava electrotropha ElOx9^T. The finished genome of this strain is 4.3 MB, and consists of 4,139 predicted ORFs, 54 contain heme binding motifs, and 33 of those 54 are predicted to localize to the cell envelope or have unknown localizations. To begin to understand the genetic basis of oxidative EET in ElOx9^T, we constructed a transposon mutant library in semi-rich media which was comprised of >91,000 individual mutants encompassing >69,000 unique TA dinucleotide insertion sites. The library was subjected to heterotrophic growth on minimal media with acetate and autotrophic oxidative EET conditions on indium tin oxide coated glass electrodes poised at –278 mV vs. SHE or un-poised in an open circuit condition. We identified 528 genes classified as essential under these growth conditions. With respect to electrochemical conditions, 25 genes were essential under oxidative EET conditions, and 29 genes were essential in both the open circuit control and oxidative EET conditions. Though many of the genes identified under electrochemical conditions are predicted to be localized in the cytoplasm and lack heme binding motifs and/or homology to known EET proteins, we identified several hypothetical proteins and poorly characterized oxidoreductases that implicate a novel mechanism(s) for EET that warrants further study. Our results provide a starting point to explore the genetic basis of novel oxidative EET in this marine sediment microbe.

Evaluation of extracellular electron transfer in Pseudomonas aeruginosa by co-expression of intermediate genes in NAD synthetase production pathway

Pseudomonas aeruginosa (PA) is an electrogenic bacterium, in which extracellular electron transfer (EET) is mediated by microbially-produced phenazines, especially pyocyanin. Increasing EET rate in electrogenic bacteria is key for the development of biosensors and bioelectrofermentation processes. In this work, the production of pyocyanin, Nicotinamide Adenine Dinucleotide (NAD) and NAD synthetase by the electrogenic strain PA-A4 is determined using a Microbial Fuel Cell (MFC). Effects of metabolic inhibition and enhancement of pyocyanin and NAD synthetase on NAD/NADH levels and electrogenicity was demonstrated by short chronoamperometry measurements (0-48 h). Combined overexpression of two intermediate NAD synthetase production genes-nicotinic acid mononucleotide adenyltransferase (nadD) and quinolic acid phosphoribosyltransferase (nadC) genes, which are distant on the PA genomic map, enabled co-transcription and increased NAD synthetase activity. The resulting PA-A4 nadD + nadC shows increases in pyocyanin concentration, NAD synthetase activity, NAD/NADH levels, and MFC potential, all significantly higher than its wild type. Extracellular respiratory mechanisms in PA are linked with NAD metabolism, and targeted increased yield of NAD could directly lead to enhanced EET. A previous attempt at enhancing NAD synthetase for electrogenicity by targeting the terminal NAD synthetase gene (nadE) in standard P. aeruginosa PA01 had earlier been reported. Our work however, poses another route to electrogenicity enhancement in PA using; a combination of nadD and nadC. Further experiments are needed to understand specific intracellular mechanisms governing how over-expression of nadD and nadC induced activity of NadE protein. These findings significantly advance the knowledge of the versatility of NAD biosynthetic genes in PA electrogenicity.

Accelerating effect of pyocyanin on microbiologically influenced corrosion of 304 stainless steel by the Pseudomonas aeruginosa biofilm

In this study, the influence of exogenous pyocyanin (PYO) on the microbiologically influenced corrosion (MIC) of 304 stainless steel by Pseudomonas aeruginosa was investigated. Under sterile condition, the additional PYO in the culture medium had no effect on the corrosion of 304 stainless steel. In contrast, P. aeruginosa biofilm inoculated in the media with additional PYO resulted in more severe pitting corrosion. EIS and cyclic potentiodynamic polarization results indicated that exogenous PYO promoted the electron transfer efficiency between the P. aeruginosa biofilm and the stainless steel surface. X-ray photoelectron spectroscopy (XPS) and transmission electron microscope (TEM) results further demonstrated that the P. aeruginosa led the breakdown of passive film predominantly by accelerating the bioreductive dissolution of iron oxides.

Bioelectricity generation from human urine and simultaneous nutrient recovery: Role of Microbial Fuel Cells

Urine is a 'valuable waste' that can be exploited to generate bioelectricity and recover key nutrients for producing NPK-rich biofertilizers. In recent times, improved and innovative waste management technologies have emerged to manage the rapidly increasing environmental pollution and to accomplish the goal of sustainable development. Microbial fuel cells (MFCs) have attracted the attention of environmentalists worldwide to treat human urine and produce power through bioelectrochemical reactions in presence of electroactive bacteria growing on the anode. The bacteria break down the complex organic matter present in urine into simpler compounds and release the electrons which flow through an external circuit generating current at the cathode. Many other useful products are harvested at the end of the process. So, in this review, an attempt has been made to synthesize the information on MFCs fuelled with urine to generate bioelectricity and recover value-added resources (nutrients), and their modifications to enhance productivity. Moreover, configuration and mode of system operation, and factors enhancing the performance of MFCs have been also presented.

The influence of nanomaterials on pyocyanin production by Pseudomonas aeruginosa

Pseudomonas aeruginosa is a bacterium producing industrially utile metabolites, such as rhamnolipids, biopolymers, and pigments. Pyocyanin, the most studied example of pigments, is a virulence factor that also shows the potential for application in, e.g., agriculture, anticancer therapy, and energy production. Therefore, potential inhibitors and stimulants of pyocyanin production by P. aeruginosa should be studied, and nanomaterials may cause both effects. The study aimed to examine the influence of zinc oxide and multi-walled carbon nanotubes (pristine or dispersed with alginic acid) on pyocyanin production by P. aeruginosa. First, the influence of different concentrations of nanomaterials (500.00–0.06 µg/mL) on culture optical density and biofilm formation was studied. These results helped select concentrations for further tests, i.e., growth curves and fluorescence measurements. Pyocyanin production was assessed by the chloroform–hydrochloric acid method. SEM analysis was conducted to assess the influence of nanomaterials on the cell's integrity and biofilm structure. Pristine multi-walled carbon nanotubes exhibited a stimulative effect on pigment production when applied in high concentrations (500.00 µg/mL), while dispersed material enhanced the production in lowered dosages (125.00 µg/mL). On the other hand, high concentrations of zinc oxide inhibited pyocyanin production, while minor increased bioproduct production. The research indicates the potential to use nanomaterials as the modulators of pyocyanin production and other metabolites.

Extracellular Electron Transfer by Pseudomonas aeruginosa in Biocorrosion: A Review

Microorganisms with extracellular electron transfer (EET) capability have gained significant attention for their different biotechnological applications, like biosensors, bioremediation, and microbial fuel cells. Current research affirmed that microbial EET potentially promotes corrosion of iron structures, termed microbiologically influenced corrosion (MIC). The sulfate-reducing (SRB) and nitrate-reducing (NRB) bacteria are the most investigated among the different MIC-promoting bacteria. Unlike extensively studied SRB corrosion, NRB corrosion has received less attention from researchers. Hence, this review focuses on EET by Pseudomonas aeruginosa, a pervasive bacterium competent for developing biofilms in marine habitats and oil pipelines. A comprehensive discussion on the fundamentals of EET mechanisms in MIC is provided first. After that, the review offers state-of-the-art insights into the latest research on the EET-assisted MIC by Pseudomonas aeruginosa. The role of electron transfer mediators has also been discussed to understand the mechanisms involved in a better way. This review will be beneficial to open up new opportunities for developing strategies for combating biocorrosion.

Sustainable strategy on microbial fuel cell to treat the wastewater for the production of green energy

Microbial fuel cell (MFC) is one of the promising alternative energy systems where the catalytic conversion of chemical energy into electrical energy takes places with the help of microorganisms. The basic configuration of MFC consists of three major components such as electrodes (anode and cathode), catalyst (microorganism) and proton transport/exchange membrane (PEM). MFC classified into four types based on the substrate utilized for the catalytic energy conversion process such as Liquid-phase MFC, Solid-phase MFC, Plant-MFC and Algae-MFC. The core performance of MFC is organic substrate oxidation and electron transfer. Microorganisms and electrodes are the key factors that decide the efficiency of MFC system for electricity generation. Microorganism catalysis degradation of organic matters and assist the electron transfer to anode surface, the conductivity of anode material decides the rate of electron transport to cathode through external circuit where electrons are reduced with hydrogen and form water with oxygen. Not limited to electricity generation, MFC also has diverse applications in different sectors including wastewater treatment, biofuel (biohydrogen) production and used as biosensor for detection of biological oxygen demand (BOD) of wastewater and different contaminants concentration in water. This review explains different types of MFC systems and their core performance towards energy conversion and waste management. Also provides an insight on different factors that significantly affect the MFC performance and different aspects of application of MFC systems in various sectors. The challenges of MFC system design, operations and implementation in pilot scale level and the direction for future research are also described in the present review.

A review on recent advancements in bioenergy production using microbial fuel cells

The generation of energy and its efficient use in industries and agriculture are critical to any country's growth. A country like India, which is still developing, faces a major challenge in terms of generating adequate electricity. With the current crisis and environmental concerns, the government must look past carbon-based energy sources and into long-term energy sources. Microbial fuel cells (MFCs) are a form of technology that can be used to both treat wastewater and generate electricity on a large scale. Researchers play a critical role in making this technology practical and effective enough to be implemented. However, since the charge of building microbial fuel cells is superior than the cost of fossil fuels, it is unlikely that power production will continually be aggressive with existing energy generation approaches. However, improvements in power densities and lower material expenses could render microbial fuel cells a viable option for energy making in the future. Following a thorough literature review, the analysis resumes the role of micro-organisms and substrates in the anode chamber. Microbial fuel cells are discussed in terms of their forms, materials, mechanism, and activity. This analysis discusses the various factors that influence microbial fuel cells, as well as contemporary challenges and applications in the development of sustainable electrical power.

Microbial fuel cell enhanced pollutants removal in a solid-phase biological denitrification reactor: System performance, bioelectricity generation and microbial community analysis

A novel electrochemical system of microbial fuel cell (MFC) coupled solid-phase denitrification biofilm reactor (DBR) system was established to explore the effect of simultaneous power generation and pollutant removal under different HRTs (Ⅰ:48 h; Ⅱ :24 h). The average removal rates of methyl orange, Cr (VI) and NO₃^--N in test group were 93.0, 98.6 and 95.5% within 60 days, while those were 53.1, 72.1 and 72.7% in control. The maximum power density was 61.2 (Ⅰ) and 16.1 mW/m² (Ⅱ), while average output voltage was 122 (Ⅰ) and 83.6 mV (Ⅱ). Components 1 and 2 in soluble microbial products were identified, and the humic-like and fulvic acid-like substances varied through different layers. Pseudomonas produced electricity in anode, while denitrified in denitrification layer. Importantly, symbiotic cooperation was absolutely dominant in network analysis of both anodic and denitrifying biofilms. MFC significantly improved DBR's ability to treatment co-polluted wastewater.

Interaction of an acidic sophorolipid biosurfactant with phosphatidylcholine model membranes

Sophorolipids (SLs) constitute a group of unique biosurfactants (BS) in the light of their outstanding properties, among which their antimicrobial activities stand out. SLs can exist mainly in an acidic and a lactonic form, both of which display inhibitory activity. Given the amphipathic nature of SLs it is feasible that these antimicrobial actions are the result of the perturbation of the physicochemical properties of targeted membranes. Thus, in this work we have carried out a biophysical study to unveil the molecular details of the interaction of an acidic SL with a model phospholipid membrane made of 1,2-dipalmitoy-sn-glycero-3-phosphocholine (DPPC). Using differential scanning calorimetry it was found that SL altered the phase behaviour of DPPC at low molar fractions, producing fluid phase immiscibility with the result of formation of biosurfactant-enriched domains within the phospholipid bilayer. Fourier-transform infrared spectroscopy showed that SL interacted with DPPC increasing ordering of the phospholipid acyl chain palisade and hydration of the lipid/water interface. Small angle X-ray scattering showed that SL did not modify bilayer thickness in the biologically relevant L_α fluid phase. SL was found to induce contents leakage in 1-palmitoy-2-oleoy-sn-glycero-3-phosphocholine (POPC) unilamellar liposomes, at sublytic concentrations below the cmc. This SL-induced membrane permeabilization at concentrations below the onset for membrane solubilization can be the result of the formation of laterally segregated domains, which might contribute to provide a molecular basis for the reported antimicrobial actions of SLs.

Biocatalyst physiology and interplay: a protagonist of MFC operation

Microbial fuel cells (MFC) have been foreseen as a sustainable renewable energy resource to meet future energy demand. In the past, several studies have been executed in both benchtop and pilot scale to produce electrical energy from wastewater. The key role players in this technology that leads to the operation are microbes, mainly bacteria. The dominant among them is termed as "exoelectrogens" that have the capability to produce and transport electron by utilizing waste source. The current review focuses on such electrogenic bacteria's involvement for enhanced power generation of MFC. The pathway of electron transfer in their cell along and its conduction to the extracellular environment of the MFC system are critically discussed. The interaction of the microbes in various MFC operational conditions, including the role of substrate and solid electron acceptors, i.e., anode, external resistance, temperature, and pH, was also discussed in depth along with biotechnological advancement and future research perspective.

Identification of enriched hyperthermophilic microbial communities from a deep-sea hydrothermal vent chimney under electrolithoautotrophic culture conditions

Deep-sea hydrothermal vents are extreme and complex ecosystems based on a trophic chain. We are still unsure of the identities of the first colonizers of these environments and their metabolism, but they are thought to be (hyper)thermophilic autotrophs. Here we investigate whether the electric potential observed across hydrothermal chimneys could serve as an energy source for these first colonizers. Experiments were performed in a two-chamber microbial electrochemical system inoculated with deep-sea hydrothermal chimney samples, with a cathode as sole electron donor, CO2 as sole carbon source, and nitrate, sulfate, or oxygen as electron acceptors. After a few days of culturing, all three experiments showed growth of electrotrophic biofilms consuming the electrons (directly or indirectly) and producing organic compounds including acetate, glycerol, and pyruvate. Within the biofilms, the only known autotroph species retrieved were members of Archaeoglobales. Various heterotrophic phyla also grew through trophic interactions, with Thermococcales growing in all three experiments as well as other bacterial groups specific to each electron acceptor. This electrotrophic metabolism as energy source driving initial microbial colonization of conductive hydrothermal chimneys is discussed.

Enhanced mechanism of extracellular electron transfer between semiconducting minerals anatase and Pseudomonas aeruginosa PAO1 in euphotic zone

Focusing the marine euphotic zone, which is the pivotal region for interaction of solar light-mineral-microorganism and the elements cycle, we have conducted the research on the mechanism of semiconducting minerals promoting extracellular electron transfer with microorganisms in depth. Therein, anatase which is one of the most representative semiconducting minerals in marine euphotic zone was selected. The mineralogical characterization of anatase was identified by ESEM, AFM, EDS, Raman, XRD, and its semiconducting characteristics was determined by UV-Vis and Mott-Schottky plots. Determined by the electrochemical measurement of I-t curves, the photocurrent density of anatase was more prominent than dark current density. Pseudomonas aeruginosa PAO1 was widely distributed in the euphotic zone, and its mutants of operons deficient in biosynthesis pyocyanin (Δphz1Δphz2) and pili deficient (ΔpilA) were employed in this study. I-t curves indicated that both direct and indirect extracellular electron transfer processes occurred between anatase and PAO1. The indirect electron transfer depending on pyocyanin secreted by PAO1 was the main electron transfer mode. This work demonstrated the light-driven extracellular electron transfer and further revealed the photo-catalyzed mechanisms between anatase and PAO1 in marine euphotic zone.

Evaluation of surface active and antimicrobial properties of alkyl D-lyxosides and alkyl L-rhamnosides as green surfactants

The use of carbohydrates, as a part of surface-active compounds, has been studied due to their biodegradability and nontoxic profile. A series of alkyl glycosides containing d-lyxose and l-rhamnose with alkyl chains of 8-12 carbon atoms were investigated. The effects of structural variations on their physico-chemical and biological properties have been evaluated for a detailed understanding of their properties. Alkyl glycosides were tested on their toxicity against bacterial cells of the genus Pseudomonas (MTT assay), microbiological adhesion to hydrocarbons (MATH assay), cell surface hydrophobicity (Congo red assay), cell membrane permeability (crystal violet assay), and bacterial biofilm formation. Furthermore, their antifungal activity against two pathogenic microorganisms Candida albicans and Aspergillus niger was investigated using the disc diffusion method. Toxicological studies revealed that compounds could reduce the metabolic activity of bacterial cells only moderately but they increased the hydrophobicity of cell surface in Pseudomonas strains. In addition, alkyl glycosides changed the permeability of the cell membranes to the level of 30-40% for this strain. The compounds with an even number of carbon atoms in their alkyl chain promoted stronger bacterial biofilm formation on the glass surface. All studied derivatives demonstrated very strong antifungal activity against fungus A. niger but very small effect against C. albicans. Overall, the results showed that long-chain alkyl glycosides could be considered as inexpensive, biocompatible, nontoxic agents, and serve for the surface design to avoid bacterial adhesion as an alternative solution to antibiotic treatment.

Metabolic engineering of E. coli for pyocyanin production

Pyocyanin is a secondary metabolite from Pseudomonas aeruginosa that belongs to the class of phenazines, which are aromatic nitrogenous compounds with numerous biological functions. Besides its antifungal and antimicrobial activities, pyocyanin is a remarkable redox-active molecule with potential applications ranging from the pharma industry to the development of microbial fuel cells. Nevertheless, pyocyanin production has been restricted to P. aeruginosa strains, limiting its practical applicability. In this study, the pyocyanin biosynthetic pathway was engineered for the first time for high level production of this compound in a heterologous host. Escherichia coli cells harboring the nine-gene pathway divided into two plasmids were able to produce and secrete pyocyanin at higher levels than some Pseudomonas aeruginosa strains. The influence of culture and induction parameters were evaluated, and the optimized conditions led to an increase of 3.5-fold on pyocyanin accumulation. Pathway balancing was achieved by testing a set of plasmids with different copy numbers to optimize the expression levels of pyocyanin biosynthetic genes, resulting in a fourfold difference in product titer among the engineered strains. Further improvements were achieved by co-expression of Vitreoscilla hemoglobin Vhb, which relieved oxygen limitations and led to a final titer of 18.8 mg/L pyocyanin. These results show promise to use E. coli for phenazines production, and the engineered strain developed here has the potential to be used in electro-fermentation systems where pyocyanin plays a role as electron-shuttle.

Improving the catalytic performance of Pichia pastoris whole-cell biocatalysts by fermentation process

Whole-cell biocatalysts have a wide range of applications in many fields. However, the transport of substrates is tricky when applying whole-cell biocatalysts for industrial production. In this research, P. pastoris whole-cell biocatalysts were constructed for rebaudioside A synthesis. Sucrose synthase was expressed intracellularly while UDP-glycosyltransferase was displayed on the cell wall surface simultaneously. As an alternative method, a fermentation process is applied to relieve the substrate transport-limitation of P. pastoris whole-cell biocatalysts. This fermentation process was much simpler, more energy-saving, and greener than additional operating after collecting cells to improve the catalytic ability of whole-cell biocatalysts. Compared with the general fermentation process, the protein production capacity of cells did not decrease. Meanwhile, the activity of whole-cell biocatalysts was increased to 262%, which indicates that the permeability and space resistance were improved to relieve the transport-limitations. Furthermore, the induction time was reduced from 60 h to 36 h. The fermentation process offered significant advantages over traditional permeabilizing reagent treatment and ultrasonication treatment based on the high efficiency and simplicity.

Fermentation process was applied to relieve the substrate transport-limitation of P. pastoris whole-cell biocatalysts, which was much simpler, more energy-saving and greener than c traditional permeabilizing reagent and ultrasonication treatment.

Anode Modification as an Alternative Approach to Improve Electricity Generation in Microbial Fuel Cells

Sustainable production of electricity from renewable sources by microorganisms is considered an attractive alternative to energy production from fossil fuels. In recent years, research on microbial fuel cells (MFCs) technology for electricity production has increased. However, there are problems with up-scaling MFCs due to the fairly low power output and high operational costs. One of the approaches to improving energy generation in MFCs is by modifying the existing anode materials to provide more electrochemically active sites and improve the adhesion of microorganisms. The aim of this review is to present the effect of anode modification with carbon compounds, metallic nanomaterials, and polymers and the effect that these modifications have on the structure of the microbiological community inhabiting the anode surface. This review summarizes the advantages and disadvantages of individual materials as well as possibilities for using them for environmentally friendly production of electricity in MFCs.

Microbial extracellular electron transfer and strategies for engineering electroactive microorganisms

Electroactive microorganisms (EAMs) are ubiquitous in nature and have attracted considerable attention as they can be used for energy recovery and environmental remediation via their extracellular electron transfer (EET) capabilities. Although the EET mechanisms of Shewanella and Geobacter have been rigorously investigated and are well characterized, much less is known about the EET mechanisms of other microorganisms. For EAMs, efficient EET is crucial for the sustainable economic development of bioelectrochemical systems (BESs). Currently, the low efficiency of EET remains a key factor in limiting the development of BESs. In this review, we focus on the EET mechanisms of different microorganisms, (i.e., bacteria, fungi, and archaea). In addition, we describe in detail three engineering strategies for improving the EET ability of EAMs: (1) enhancing transmembrane electron transport via cytochrome protein channels; (2) accelerating electron transport via electron shuttle synthesis and transmission; and (3) promoting the microbe-electrode interface reaction via regulating biofilm formation. At the end of this review, we look to the future, with an emphasis on the cross-disciplinary integration of systems biology and synthetic biology to build high-performance EAM systems.

Insights into Advancements and Electrons Transfer Mechanisms of Electrogens in Benthic Microbial Fuel Cells

Benthic microbial fuel cells (BMFCs) are a kind of microbial fuel cell (MFC), distinguished by the absence of a membrane. BMFCs are an ecofriendly technology with a prominent role in renewable energy harvesting and the bioremediation of organic pollutants through electrogens. Electrogens act as catalysts to increase the rate of reaction in the anodic chamber, acting in electrons transfer to the cathode. This electron transfer towards the anode can either be direct or indirect using exoelectrogens by oxidizing organic matter. The performance of a BMFC also varies with the types of substrates used, which may be sugar molasses, sucrose, rice paddy, etc. This review presents insights into the use of BMFCs for the bioremediation of pollutants and for renewable energy production via different electron pathways.

Joint effect of surfactants and cephalexin on the formation of Escherichia coli filament

Both antibiotics and surfactants commonly exist in natural environment and have generated great concerns due to their biological influence on the ecosystem. A major concern lies in the capacity of antibiotics to induce bacterial filaments formation, which has potential health risks. However, their joint effect is not clear so far. Here, we studied the joint effect of cephalexin (Cex), a typical antibiotic, and differently charged surfactants on the formation of E. coli filaments. Three kinds of surfactants characterized by different charges were used: cationic surfactant (CTAB), anionic surfactant (SDS) and nonionic surfactant (Tween). Data showed that Cex alone caused the formation of E. coli filaments, elongating their maximum profile from ca. 2 μm (a single E. coli cell) to tens of micrometers (an E. coli filament). A joint use of surfactants with Cex could produce even longer E. coli filaments, elongating the maximum length of the bacteria to larger than 100 μm. The capacity order of different surfactants under their optimum concentrations to produce elongated E. coli filaments was Tween > SDS > CTAB. The E. coli filaments were characterized with a normal DNA distribution and a good cell membrane integrity. We measured the stiffness of bacterial cell wall by atomic force microscopy and correlated the elongation capacity of the E. coli filaments to the stiffness of cell wall. Zeta potential measurement indicated that inserting into or being bound to the cell surface in a large quantity was tested not to be the major way that surfactants interacted with bacteria.

A 96-well high-throughput, rapid-screening platform of extracellular electron transfer in microbial fuel cells

Microbial extracellular electron transfer (EET) stimulates a plethora of intellectual concepts leading to potential applications that offer environmentally sustainable advances in the fields of biofuels, wastewater treatment, bioremediation, desalination, and biosensing. Despite its vast potential and remarkable research efforts to date, bacterial electrogenicity is arguably the most underdeveloped technology used to confront the aforementioned challenges. Severe limitations are placed in the intrinsic energy and electron transfer processes of naturally occurring microorganisms. Significant boosts in this technology can be achieved with the growth of synthetic biology tools that manipulate microbial electron transfer pathways and improve their electrogenic potential. In particular, electrogenic Pseudomonas aeruginosa has been studied with the utility of its complete genome being sequenced coupled with well-established techniques for genetic manipulation. To optimize power density production, a high-throughput, rapid and highly sensitive test array for measuring the electrogenicity of hundreds of genetically engineered P. aeruginosa mutants is needed. This task is not trivial, as the accurate and parallel quantitative measurements of bacterial electrogenicity require long measurement times (~tens of days), continuous introduction of organic fuels (~tends of milliliters), architecturally complex and often inefficient devices, and labor-intensive operation. The overall objective of this work was to enable rapid (<30 min), sensitive (>100-fold improvement), and high-throughput (>96 wells) characterization of bacterial electrogenicity from a single 5 μL culture suspension. This project used paper as a substratum that inherently produces favorable conditions for easy, rapid, and sensitive control of an electrogenic microbial suspension. From 95 isogenic P. aeruginosa mutant, an hmgA mutant generated the highest power density (39 μW/cm²), which is higher than that of wild-type P. aeruginosa and even the strongly electrogenic organism, Shewanella oneidensis (25 μW/cm²). In summary, this work will serve as a springboard for the development of novel paradigms for genetic networks that will help develop mutations or over-expression and synthetic biology constructs to identify genes in P. aeruginosa and other organisms that enhance electrogenic performance in microbial fuel cells (MFCs).

Biosurfactants and Synthetic Surfactants in Bioelectrochemical Systems: A Mini-Review

Bioelectrochemical systems (BESs) are ruled by a complex combination of biological and abiotic factors. The interplay of these factors determines the overall efficiency of BES in generating electricity and treating waste. The recent progress in bioelectrochemistry of BESs and electrobiotechnology exposed an important group of compounds, which have a significant contribution to operation and efficiency: surface-active agents, also termed surfactants. Implementation of the interfacial science led to determining several effects of synthetic and natural surfactants on BESs operation. In high pH, these amphiphilic compounds prevent the cathode electrodes from biodeterioration. Through solubilization, their presence leads to increased catabolism of hydrophobic compounds. They interfere with the surface of the electrodes leading to improved biofilm formation, while affecting its microarchitecture and composition. Furthermore, they may act as quorum sensing activators and induce the synthesis of electron shuttles produced by electroactive bacteria. On the other hand, the bioelectrochemical activity can be tailored for new, improved biosurfactant production processes. Herein, the most recent knowledge on the effects of these promising compounds in BESs is discussed.

Strategies for improving the electroactivity and specific metabolic functionality of microorganisms for various microbial electrochemical technologies

Electroactive microorganisms, which possess extracellular electron transfer (EET) capabilities, are the basis of microbial electrochemical technologies (METs) such as microbial fuel and electrolysis cells. These are considered for several applications ranging from the energy-efficient treatment of waste streams to the production of value-added chemicals and fuels, bioremediation, and biosensing. Various aspects related to the microorganisms, electrodes, separators, reactor design, and operational or process parameters influence the overall functioning of METs. The most fundamental and critical performance-determining factor is, however, the microorganism-electrode interactions. Modification of the electrode surfaces and microorganisms for optimizing their interactions has therefore been the major MET research focus area over the last decade. In the case of microorganisms, primarily their EET mechanisms and efficiencies along with the biofilm formation capabilities, collectively considered as microbial electroactivity, affect their interactions with the electrodes. In addition to electroactivity, the specific metabolic or biochemical functionality of microorganisms is equally crucial to the target MET application. In this article, we present the major strategies that are used to enhance the electroactivity and specific functionality of microorganisms pertaining to both anodic and cathodic processes of METs. These include simple physical methods based on the use of heat and magnetic field along with chemical, electrochemical, and growth media amendment approaches to the complex procedure-based microbial bioaugmentation, co-culture, and cell immobilization or entrapment, and advanced toolkit-based biofilm engineering, genetic modifications, and synthetic biology strategies. We further discuss the applicability and limitations of these strategies and possible future research directions for advancing the highly promising microbial electrochemistry-driven biotechnology.

Harnessing biocompatible chemistry for developing improved and novel microbial cell factories

White biotechnology relies on the sophisticated chemical machinery inside living cells for producing a broad range of useful compounds in a sustainable and environmentally friendly way. However, despite the impressive repertoire of compounds that can be generated using white biotechnology, this approach cannot currently fully replace traditional chemical production, often relying on petroleum as a raw material. One challenge is the limited number of chemical transformations taking place in living organisms. Biocompatible chemistry, that is non‐enzymatic chemical reactions taking place under mild conditions compatible with living organisms, could provide a solution. Biocompatible chemistry is not a novel invention, and has since long been used by living organisms. Examples include Fenton chemistry, used by microorganisms for degrading plant materials, and manganese or ketoacids dependent chemistry used for detoxifying reactive oxygen species. However, harnessing biocompatible chemistry for expanding the chemical repertoire of living cells is a relatively novel approach within white biotechnology, and it could potentially be used for producing valuable compounds which living organisms otherwise are not able to generate. In this mini review, we discuss such applications of biocompatible chemistry, and clarify the potential that lies in using biocompatible chemistry in conjunction with metabolically engineered cell factories for cheap substrate utilization, improved cell physiology, efficient pathway construction and novel chemicals production.

Organic matter and ammonia removal by a novel integrated process of constructed wetland and microbial fuel cells

A novel approach, combining a microbial fuel cell (MFC) with an integrated vertical flow constructed wetland (IVCW), was developed, and its ability to simultaneously produce electrical energy while treating swine wastewater was verified. The system combined the singular water flow path of a traditional vertical flow constructed wetland (upflow and downflow)-microbial fuel cell (CW-MFC), which demonstrates better characteristics in the aerobic, anoxic, and anaerobic regions. It not only enhanced the anti-pollution load ability and the organic compound removal effect, but also improved the gradient difference in the redox potential of the system. The results showed that the structure and substrate distribution in the device could both improve swine wastewater treatment and increase bioelectricity generation capabilities. The average chemical oxygen demand (COD) and ammonia nitrogen (NH4 +-N) removal efficiencies were as high as 79.65% and 77.5%, respectively. Long-term and stable bioelectricity generation was achieved under continuous flow conditions. The peak values of the output voltage and power density were 713 mV and 456 mW m-3. The activated carbon layer at the bottom of this system provided a larger surface for the growth of microbes. It showed significant promotion of the relative abundance of electrochemically active bacteria, which might result in the increase of bioelectricity generation in integrated vertical flow constructed wetland-microbial fuel cells (IVCW-MFCs). The electrochemically active bacteria, Geobacter and Desulfuromonas, were detected in the anodic biofilm by high-throughput sequencing analysis.

Biological synthesis of high-conductive pili in aerobic bacterium Pseudomonas aeruginosa

Bioelectrical nanowires as ecomaterials have great potential on environmental applications. A wide range of bacteria can express type IV pili (T4P), which are long protein fibers assembled from PilA. The T4P of Geobacter sulfurreducens are well known as "microbial nanowires," yet T4P of Pseudomonas aeruginosa (PaT4P) was believed to be poorly conductive. P. aeruginosa is an aerobic and electrochemically active bacterium. Its T4P have been known to be responsible for surface attachment, twitching motility and biofilm formation. Here, we show that PaT4P can be highly conductive while assembled by a truncated P. aeruginosa PilA (PaPilA) containing only N-terminus 61 amino acids. Furthermore, increasing the number of aromatic amino acids in the PaPilA_1-61 significantly enhances the conductivity of pili and the bioelectricity output of P. aeruginosa in microbial fuel cell system, suggesting a potential application of PaT4P as a conductive nanomaterial. The N-terminal region of PilA from diverse eubacteria is highly conserved, implying a general way to synthesize highly conductive microbial nanowires and to increase the bioelectricity output of microbial fuel cell.

Enhanced Rhodococcus pyridinivorans HR-1 anode performance by adding trehalose lipid in microbial fuel cell

In this study, a trehalose lipid was added to a Rhodococcus pyridinivorans-inoculated MFC to improve the power output by enhancing electron transfer. Upon trehalose lipid additions of different concentrate from 0 to 20 mg/L, the maximum power density increased from 54.7 mW/m² to 324.4 mW/m² (5.93 times) while the corresponding current density was 3.66 times increased from 0.35 A/m² to 1.28 A/m². Cyclic voltammetry analysis revealed that the addition of trehalose lipid increased the electron transfer performance, while electrochemical impedance spectroscopy results proved a decrease in internal resistance. It was demonstrated that adding bio-surfactant in MFC was a novel way to enhance power output performance.

Microbial fuel cells as an alternative energy source: current status

Microbial fuel cell (MFC) technology is an emerging area for alternative renewable energy generation and it offers additional opportunities for environmental bioremediation. Recent scientific studies have focused on MFC reactor design as well as reactor operations to increase energy output. The advancement in alternative MFC models and their performance in recent years reflect the interests of scientific community to exploit this technology for wider practical applications and environmental benefit. This is reflected in the diversity of the substrates available for use in MFCs at an economically viable level. This review provides an overview of the commonly used MFC designs and materials along with the basic operating parameters that have been developed in recent years. Still, many limitations and challenges exist for MFC development that needs to be further addressed to make them economically feasible for general use. These include continued improvements in fuel cell design and efficiency as well scale-up with economically practical applications tailored to local needs.

Effect of impaired twitching motility and biofilm dispersion on performance of Pseudomonas aeruginosa-powered microbial fuel cells

Pseudomonas aeruginosa is a metabolically voracious bacterium that is easily manipulated genetically. We have previously shown that the organism is also highly electrogenic in microbial fuel cells (MFCs). Polarization studies were performed in MFCs with wild-type strain PAO1 and three mutant strains (pilT, bdlA and pilT bdlA). The pilT mutant was hyperpiliated, while the bdlA mutant was suppressed in biofilm dispersion chemotaxis. The double pilT bdlA mutant was expected to have properties of both mutations. Polarization data indicate that the pilT mutant showed 5.0- and 3.2-fold increases in peak power compared to the wild type and the pilT bdlA mutant, respectively. The performance of the bdlA mutant was surprisingly the lowest, while the pilT bdlA electrogenic performance fell between the pilT mutant and wild-type bacteria. Measurements of biofilm thickness and bacterial viability showed equal viability among the different strains. The thickness of the bdlA mutant, however, was twice that of wild-type strain PAO1. This observation implicates the presence of dead or dormant bacteria in the bdlA mutant MFCs, which increases biofilm internal resistance as confirmed by electrochemical measurements.