1
|
Ye J, Zhang T, Hao Y, Tan W, Su H, Wang Y, Feng Q, Xu L. Effects of Co 3O 4 modified with MoS 2 on microbial fuel cells performance. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2024; 367:121966. [PMID: 39068783 DOI: 10.1016/j.jenvman.2024.121966] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/28/2024] [Revised: 06/03/2024] [Accepted: 07/17/2024] [Indexed: 07/30/2024]
Abstract
In this study, Co3O4@MoS2 is prepared as anodic catalytic material for microbial fuel cells (MFCs). As the mass fraction of MoS2 is 20%, the best performance of Co3O4@MoS2 composite catalytic material is achieved, and the addition of MoS2 enhances both the electrical conductivity and catalytic performance of the composite catalyst. Through the structural characterization of Co3O4@MoS2 composite catalytic material, nanorod-like Co3O4 and lamellar MoS2 interweaved and stacked each other, and the agglomeration of Co3O4 is weakened. Among the four groups of single-chamber MFCs constructed, the Co3O4@MoS2-MFC shows the best power production performance with a maximum stable output voltage of to 539 mV and a maximum power density of up to 2221 mW/m2. Additionally, the ammonia nitrogen removal rate of the MFCs loaded with catalysts is enhanced by about 10% compared with the blank carbon cloth MFC. Overall, the findings suggest that Co3O4@MoS2 composite catalysts can significantly improve the performance of MFCs, making them more effective for both energy production and wastewater treatment.
Collapse
Affiliation(s)
- Jingyi Ye
- State Key Laboratory of Coal Mine Disaster Dynamics and Control, Chongqing University, Chongqing, 400044, China.
| | - Teng Zhang
- State Key Laboratory of Coal Mine Disaster Dynamics and Control, Chongqing University, Chongqing, 400044, China.
| | - Yu Hao
- Science and Technology Department, Chongqing Vocational Institute of Engineering, Chongqing, 402260, China.
| | - Wenwen Tan
- State Key Laboratory of Coal Mine Disaster Dynamics and Control, Chongqing University, Chongqing, 400044, China.
| | - Huaren Su
- State Key Laboratory of Coal Mine Disaster Dynamics and Control, Chongqing University, Chongqing, 400044, China.
| | - Yong Wang
- State Key Laboratory of Coal Mine Disaster Dynamics and Control, Chongqing University, Chongqing, 400044, China.
| | - Qi Feng
- State Key Laboratory of Coal Mine Disaster Dynamics and Control, Chongqing University, Chongqing, 400044, China.
| | - Longjun Xu
- State Key Laboratory of Coal Mine Disaster Dynamics and Control, Chongqing University, Chongqing, 400044, China.
| |
Collapse
|
2
|
de Rosset A, Tyszkiewicz N, Wiśniewski J, Pudełko-Malik N, Rutkowski P, Młynarz P, Pasternak G. Bioelectrochemical synthesis of rhamnolipids and energy production and its correlation with nitrogen in air-cathode microbial fuel cells. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2024; 365:121514. [PMID: 38908152 DOI: 10.1016/j.jenvman.2024.121514] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/06/2024] [Revised: 05/17/2024] [Accepted: 06/16/2024] [Indexed: 06/24/2024]
Abstract
Microbial fuel cells (MFCs) have been recently proven to synthesise biosurfactants from waste products. In classic bioreactors, the efficiency of biosynthesis process can be controlled by the concentration of nitrogen content in the electrolyte. However, it was not known whether a similar control mechanism could be applied in current-generating conditions. In this work, the effect of nitrogen concentration on biosurfactant production from waste cooking oil was investigated. The concentration of NH4Cl in the electrolyte ranged from 0 to 1 g L-1. The maximum power density equal to 17.5 W m-3 was achieved at a concentration of 0.5 g L-1 (C/N = 2.32) and was accompanied by the highest surface tension decrease (to 54.6 mN m-1) and an emulsification activity index of 95.4%. Characterisation of the biosurfactants produced by the LC-MS/MS method showed the presence of eleven compounds belonging to the mono- and di-rhamnolipids group, most likely produced by P. aeruginosa, which was the most abundant (19.6%) in the community. Importantly, we have found a strong correlation (R = -0.96) of power and biosurfactant activity in response to C/N ratio. This study shows that nitrogen plays an important role in the current-generating metabolism of waste cooking oil. To the best of our knowledge, this is the first study where the nitrogen optimisation was investigated to improve the synthesis of biosurfactants and power generation in a bioelectrochemical system.
Collapse
Affiliation(s)
- Aleksander de Rosset
- Department of Process Engineering and Technology of Polymer and Carbon Materials, Faculty of Chemistry, Wroclaw University of Science and Technology, Wroclaw, 50-370, Poland
| | - Natalia Tyszkiewicz
- Department of Process Engineering and Technology of Polymer and Carbon Materials, Faculty of Chemistry, Wroclaw University of Science and Technology, Wroclaw, 50-370, Poland; Department of Biochemistry, Molecular Biology and Biotechnology, Faculty of Chemistry, Wroclaw University of Science and Technology, Wroclaw, 50-370, Poland
| | - Jerzy Wiśniewski
- Department of Biochemistry, Molecular Biology and Biotechnology, Faculty of Chemistry, Wroclaw University of Science and Technology, Wroclaw, 50-370, Poland
| | - Natalia Pudełko-Malik
- Department of Biochemistry, Molecular Biology and Biotechnology, Faculty of Chemistry, Wroclaw University of Science and Technology, Wroclaw, 50-370, Poland
| | - Piotr Rutkowski
- Department of Process Engineering and Technology of Polymer and Carbon Materials, Faculty of Chemistry, Wroclaw University of Science and Technology, Wroclaw, 50-370, Poland
| | - Piotr Młynarz
- Department of Biochemistry, Molecular Biology and Biotechnology, Faculty of Chemistry, Wroclaw University of Science and Technology, Wroclaw, 50-370, Poland
| | - Grzegorz Pasternak
- Department of Process Engineering and Technology of Polymer and Carbon Materials, Faculty of Chemistry, Wroclaw University of Science and Technology, Wroclaw, 50-370, Poland.
| |
Collapse
|
3
|
Bernal-Jácome LA, Izar-Landeta JM, Flores-Ramírez R, González-Salazar LF, Vargas-Berrones KX. Nonylphenol ethoxylate degradation in detergents during shelf time, a new exposure pathway, and a perspective on their substitution. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2024:10.1007/s11356-024-33260-7. [PMID: 38607492 DOI: 10.1007/s11356-024-33260-7] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/12/2024] [Accepted: 04/05/2024] [Indexed: 04/13/2024]
Abstract
Detergents are highly produced pollutants with environmental problems like foam generation and toxic effects in biota. Nonylphenol ethoxylates (NPEs) are efficient, economical, and versatile surfactants, used in detergents for more than 40 years due to their detergency capacity. In the environment, NPE biodegrades into the metabolite nonylphenol (NP), classified as an endocrine disruptor. The identification and quantification of 4-NP in a designed detergent and 30 commercially available detergents were performed to prove the degradation of NPE into 4-NP during storage time. This investigation introduces the first evidence of NPE degradation during storage in commercially available detergents, demonstrating a novel exposure pathway in humans that has not been explored before, representing potential human health risks. Therefore, simple, easy, low-cost, and available approaches to remove and substitute NP is paramount. Alkyl polyglucoside (APG) was assessed as a substitute, and the feasibility of this substitution was proven according to physical and chemical properties, cleaning performance, and antimicrobial properties. NPE substitution in detergents is demonstrated as a viable strategy to minimize exposure risks in humans and the environment.
Collapse
Affiliation(s)
- Luis Armando Bernal-Jácome
- Centro de Investigación y Estudios de Posgrado Edificio P. Facultad de Ingeniería, Zona Universitaria, Dr. Manuel Nava #8, C.P. 78290, San Luis Potosí, S.L.P, México
| | - Juan Manuel Izar-Landeta
- Instituto Tecnológico Superior de Rioverde, Carretera Rioverde-San Ciro Km 4.5, CP, 79610, Rioverde, San Luis Potosi, México
| | - Rogelio Flores-Ramírez
- CONACYT Research Fellow, Coordinación Para La Innovación y Aplicación de La Ciencia y La Tecnología (CIACYT), Avenida Sierra Leona No. 550, Colonia Lomas Segunda Sección, CP 78210, San Luis Potosí, SLP, México
| | - Luis Fernando González-Salazar
- Centro de Investigación Aplicada en Ambiente y Salud, Avenida Sierra Leona No. 550, Colonia Lomas Segunda Sección, CP 78210, San Luis Potosí, SLP, México
| | - Karla Ximena Vargas-Berrones
- Instituto Tecnológico Superior de Rioverde, Carretera Rioverde-San Ciro Km 4.5, CP, 79610, Rioverde, San Luis Potosi, México.
| |
Collapse
|
4
|
Selim ME, Khalifa ME, Agizah FA, Mostafa EM, Awad FS. Enhanced reduction of COD in water associated with natural gas production using iron-based nanoparticles. RSC Adv 2024; 14:11633-11642. [PMID: 38605901 PMCID: PMC11005025 DOI: 10.1039/d4ra00888j] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/03/2024] [Accepted: 03/22/2024] [Indexed: 04/13/2024] Open
Abstract
The natural gas production industry faces the problem of the proper disposal of produced water and its treatment with significantly advanced technologies to meet the minimum quality standard for irrigation activities, commercial purposes, and consumption by living organisms. This study describes an effective method for reducing the COD (chemical oxygen demand) content in formation water using different metal oxide nanoparticles such as iron oxide (FO), iron zinc oxide (FZO), and iron vanadium oxide (FVO) nanoparticles. These nanoparticles were synthesized and fully characterized using powder X-ray diffraction (XRD) analysis, Fourier transform infrared (FT-IR) spectroscopy, field emission scanning electron microscopy (SEM), energy dispersive X-ray (EDX) analysis, dynamic light scattering particle size (DLS) analysis and zeta potential analysis. The experimental results revealed that the maximum reduction of COD content was 42.18% using FVO nanoparticles with a dose of 3 g L-1 at 25 °C and pH = 6. Compared to commercial products [Redoxy and Oxy(OXYSORB)], the synthesized FO, FZO, and FVO nanoparticles demonstrated their superiority by achieving excellent results in decreasing the COD content of wastewater associated with natural gas production by more than 86%. This study introduces a promising technique for decreasing the COD content using metal oxide nanoparticles, which are eco-friendly, bio-safe, cheap, and nontoxic materials, and improving the quality of wastewater associated with natural gas production for its safe disposal through sewage and treatment plants.
Collapse
Affiliation(s)
- Moataz Elsaeed Selim
- Chemistry Department, Faculty of Science, Mansoura University Mansoura 35516 Egypt +201000166374
| | - Magdi E Khalifa
- Chemistry Department, Faculty of Science, Mansoura University Mansoura 35516 Egypt +201000166374
| | | | - Eman M Mostafa
- Production Department, Egyptian Petroleum Research Institute Cairo Egypt
| | - Fathi S Awad
- Chemistry Department, Faculty of Science, Mansoura University Mansoura 35516 Egypt +201000166374
- Chemistry Department, Faculty of Science, New Mansoura University New Mansoura City 35712 Egypt
| |
Collapse
|
5
|
Yin M, Fu B, Xu T, Cao X, Huang X, Zhang X. Spatially-assembled binary carbon anode synergizing directional electron transfer and enriched microbe accommodation for wastewater treatment and energy conversion: From simulation to experiments. WATER RESEARCH 2024; 252:121104. [PMID: 38295458 DOI: 10.1016/j.watres.2024.121104] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/11/2023] [Revised: 01/01/2024] [Accepted: 01/02/2024] [Indexed: 02/02/2024]
Abstract
Bioelectrochemical systems (BESs) hold prospects in wastewater energy and resource recovery. Anode optimization is important for simultaneous enhancement of wastewater energy conversion and effluent quality in BESs. In this study, a multi-physics model coupling fluid flow, organic degradation and electrochemical process was constructed to guide the design and optimization of BES anodes. Based on the multi-physics simulation, spatially-assembled binary carbon anodes composed of three-dimensional carbon mesh skeleton and granular activated carbon were proposed and established. The granular activated carbon conducive to microbe accommodation played a vital role in improving effluent water quality, while the carbon mesh skeleton favoring electron collection and transfer could enhance the bioelectricity output. With an average chemical oxygen demand (COD) removal rate of 0.442 kg m-3 d-1, a maximum power density of 20.6 W m-3 was achieved in the optimized composite anode BES, which was 25% and 154% higher than carbon mesh skeleton BES and granular activated carbon BES. Electroactive bacteria were enriched in composite anodes and performed important functions related to microbial metabolism and energy production. The spatially-assembled binary carbon anode with low carbon mesh packing density was more cost-effective with a daily energy output per anode cost of 221 J d-1 RMB-1. This study not only provides a cost-efficient alternative anode to simultaneously improve organic degradation and power generation performance, but also demonstrates the potential of multi-physics simulation in offering theoretical support and prediction for BES configuration design as well as optimization.
Collapse
Affiliation(s)
- Mengxi Yin
- State Key Joint Laboratory of Environment Simulation and Pollution Control, State Environment Protection Key Laboratory of Microorganism Application and Risk Control, School of Environment, Tsinghua University, Beijing 100084, China
| | - Boya Fu
- State Key Joint Laboratory of Environment Simulation and Pollution Control, State Environment Protection Key Laboratory of Microorganism Application and Risk Control, School of Environment, Tsinghua University, Beijing 100084, China
| | - Ting Xu
- State Key Joint Laboratory of Environment Simulation and Pollution Control, State Environment Protection Key Laboratory of Microorganism Application and Risk Control, School of Environment, Tsinghua University, Beijing 100084, China
| | - Xiaoxin Cao
- Guizhou Zhuxin Water Environment Industries Company, Guiyang 550000, China
| | - Xia Huang
- State Key Joint Laboratory of Environment Simulation and Pollution Control, State Environment Protection Key Laboratory of Microorganism Application and Risk Control, School of Environment, Tsinghua University, Beijing 100084, China
| | - Xiaoyuan Zhang
- State Key Joint Laboratory of Environment Simulation and Pollution Control, State Environment Protection Key Laboratory of Microorganism Application and Risk Control, School of Environment, Tsinghua University, Beijing 100084, China.
| |
Collapse
|
6
|
Larzillière V, de Fouchécour F, Bureau C, Bouchez T, Moscoviz R. Urban wastewater oxidation by bioelectrochemical systems: To what extent does the inoculum matter? Bioelectrochemistry 2024; 155:108577. [PMID: 37738859 DOI: 10.1016/j.bioelechem.2023.108577] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/22/2023] [Revised: 09/16/2023] [Accepted: 09/17/2023] [Indexed: 09/24/2023]
Abstract
Bioelectrochemical systems offer an environmental-friendly alternative to activated sludge for future wastewater treatment but have not yet reached technological maturity. This study aims to assess the long-term influence of the inoculation strategy on real urban wastewater treatment by bioelectrochemical systems, focusing on both process performances and biofilm assembly dynamics. Four inoculation strategies were investigated in triplicates during six consecutive batches to treat primary clarifier effluent at lab scale. At the studied anodic potential (0.05 vs SHE), no long-term impact of the inoculation strategy on the performances was observed. Indeed, after three batches, electrochemical (88.0 ± 3.9 % coulombic efficiencies) and treatment performances (30.8 ± 3.9 % COD removals) converged for all inoculation strategies. Consistently, the microbial compositions of the different biofilms converged, with selection being the main assembly process. For larger scale bioelectrochemical reactors, the use of wastewater as both substrate and inoculum would be the most convenient choice, since the other inoculation strategies only displayed short-term effects.
Collapse
Affiliation(s)
- Valentin Larzillière
- SUEZ, Centre International de Recherche Sur l'Eau et l'Environnement (CIRSEE), 78230 Le Pecq, France.
| | | | | | | | - Roman Moscoviz
- SUEZ, Centre International de Recherche Sur l'Eau et l'Environnement (CIRSEE), 78230 Le Pecq, France
| |
Collapse
|
7
|
Ishaq A, Said MIM, Azman SB, Houmsi MR, Isah AS, Jagun ZT, Mohammad SJ, Bello AAD, Abubakar UA. The influence of various chemical oxygen demands on microbial fuel cells performance using leachate as a substrate. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2024:10.1007/s11356-024-32090-x. [PMID: 38285261 DOI: 10.1007/s11356-024-32090-x] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/19/2023] [Accepted: 01/16/2024] [Indexed: 01/30/2024]
Abstract
Microbial fuel cells (MFCs), hailed as a promising technology, hold the potential to combat various wastewater pollutants while simultaneously converting their chemical energy into electricity through biocatalysts. This study explores the applicability of a dual compartment MFC (DC-MFC) under varying conditions, targeting the removal of chemical oxygen demand (COD) from landfill leachate and electricity generation. In this setup, anaerobic sludge from a wastewater treatment plant serves as the inoculum in the anode compartment of the MFC, with a Nafion117 membrane acting as the separator between MFC units. The cathode compartments are filled with distilled water and continually aerated for 24 h to enhance air supply. The study assesses the MFC's performance across different COD concentrations, focusing on COD removal, power generation, and Coulombic efficiency. The findings reveal that COD removal efficiency is notably enhanced at higher concentrations of organic matter. Specifically, at a COD concentration of 3325.0 mg L-1, the MFC exhibited the highest COD removal efficiency (89%) and maximum power density (339.41 mWm-2), accompanied by a Coulombic efficiency of 25.5%. However, as the initial substrate concentration increased to 3825 mg L-1, the efficiency decreased to 72%, with a Coulombic efficiency of 13.56% and a power density of 262.34 mWm-2. Optical density levels increased due to bacterial growth at ambient temperature and neutral pH, reflecting the dynamic microbial response within the system.
Collapse
Affiliation(s)
- Aliyu Ishaq
- Department of Water & Environmental Engineering, School of Civil Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, 81300, Bahru, Johor, Malaysia
- Department of Water Resources and Environmental Engineering, Ahmadu Bello University, Kaduna, 1045, Zaria, Nigeria
| | - Mohd Ismid Mohd Said
- Department of Water & Environmental Engineering, School of Civil Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, 81300, Bahru, Johor, Malaysia
| | - Shamila Binti Azman
- Department of Water & Environmental Engineering, School of Civil Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, 81300, Bahru, Johor, Malaysia
| | - Mohammed Rajab Houmsi
- New Era and Development in Civil Engineering Research Group, Scientific Research Center, AlAyen University, Thi-Qar, Nasiriyah, 64001, Iraq
| | - Abubakar Sadiq Isah
- Department of Water Resources and Environmental Engineering, Ahmadu Bello University, Kaduna, 1045, Zaria, Nigeria
| | - Zainab Toyin Jagun
- Department of Real Estate, School of Built Environment Engineering And Computing, Leeds Beckett University, City Campus, Leeds, UK.
| | - Shamsuddeen Jumande Mohammad
- Department of Water Resources and Environmental Engineering, Ahmadu Bello University, Kaduna, 1045, Zaria, Nigeria
| | - Al Amin Danladi Bello
- Department of Water Resources and Environmental Engineering, Ahmadu Bello University, Kaduna, 1045, Zaria, Nigeria
| | - Umar Alfa Abubakar
- School of Engineering, Technology, and Design, Canterbury Christ Church University, North Holmes Road, Canterbury, Kent, CT1 1QU, UK
| |
Collapse
|
8
|
Barakat NAM, Gamal S, Ghouri ZK, Fadali OA, Abdelraheem OH, Hashem M, Moustafa HM. Graphitized mango seed as an effective 3D anode in batch and continuous mode microbial fuel cells for sustainable wastewater treatment and power generation. RSC Adv 2024; 14:3163-3177. [PMID: 38249675 PMCID: PMC10797328 DOI: 10.1039/d3ra05084j] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/27/2023] [Accepted: 12/08/2023] [Indexed: 01/23/2024] Open
Abstract
Herein, we explored the utilization of graphitized mango seeds as 3D-packed anodes in microbial fuel cells (MFCs) powered by sewage wastewater. Mango seeds were graphitized at different temperatures (800 °C, 900 °C, 1000 °C, and 1100 °C) and their effectiveness as anodes was evaluated. Surface morphology analysis indicated that the proposed anode was characterized by layered branches and micro-sized deep holes, facilitating enhanced biofilm formation and microorganism attachment. Maximum power densities achieved in the MFCs utilizing the mango seed-packed anodes graphitized at 1100 °C and 1000 °C were 2170.8 ± 90 and 1350.6 ± 125 mW m-2, respectively. Furthermore, the weight of the graphitized seed anode demonstrated a positive correlation with the generated power density and cell potential. Specifically, MFCs fabricated with 9 g and 6 g anodes achieved maximum power densities of 2170.8 ± 90 and 1800.5 ± 40 mW m-2, respectively. A continuous mode air cathode MFC employing the proposed graphitized mango anode prepared at 1100 °C and operated at a flow rate of 2 L h-1 generated a stable current density of approximately 12 A m-2 after 15 hours of operation, maintaining its stability for 75 hours. Furthermore, a chemical oxygen demand (COD) removal efficiency of 85% was achieved in an assembled continuous mode MFC. Considering that the proposed MFC was driven by sewage wastewater without the addition of external microorganisms, atmospheric oxygen was used as the electron acceptor through an air cathode mode, agricultural biomass waste was employed for the preparation of the anode, and a higher power density was achieved (2170.8 mW m-2) compared to reported values; it is evident that the proposed graphitized mango seed anode exhibits high efficiency for application in MFCs.
Collapse
Affiliation(s)
- Nasser A M Barakat
- Chemical Engineering Department, Faculty of Engineering, Minia University El-Minia 61516 Egypt +20862364420 +20862348005
| | - Shimaa Gamal
- Chemical Engineering Department, Faculty of Engineering, Minia University El-Minia 61516 Egypt +20862364420 +20862348005
| | - Zafar Khan Ghouri
- School of Computing, Engineering and Digital Technologies, Teesside University UK
| | - Olfat A Fadali
- Chemical Engineering Department, Faculty of Engineering, Minia University El-Minia 61516 Egypt +20862364420 +20862348005
| | - Omnia H Abdelraheem
- Sciences Engineering Department, Faculty of Engineering, Beni-Suef University Beni-Suef 62511 Egypt
| | - Mohamed Hashem
- Dental Health Department, College of Applied Medical Sciences, King Saud University Riyadh 11433 Saudi Arabia
| | - Hager M Moustafa
- Chemical Engineering Department, Faculty of Engineering, Minia University El-Minia 61516 Egypt +20862364420 +20862348005
| |
Collapse
|
9
|
Yang P, Gao Y, Wang N, Zhu Y, Xue L, Han Y, Liu J, He W, Feng Y. The restricted mass transfer inside the anode pore channel affects the electroactive biofilms formation, community composition and the power production in microbial electrochemical systems. THE SCIENCE OF THE TOTAL ENVIRONMENT 2023; 898:165448. [PMID: 37442459 DOI: 10.1016/j.scitotenv.2023.165448] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/07/2023] [Revised: 06/26/2023] [Accepted: 07/08/2023] [Indexed: 07/15/2023]
Abstract
Porous anodes improve system performance in microbial electrochemical systems by increasing the specific surface area for electroactive bacteria. In this study, multilayer anodes with different pore diameters were constructed to assess the impact of pore size and depth on anode performance. This layered structure makes detecting electroactive biofilms more accessible layer by layer, which is the first study to examine electroactive biofilms' molecular biology and electrochemical properties at different depths in pores with varied pore sizes. The millimeter-scale pores inside the bioanode have a limited effect in increasing power. The larger the pore diameter, the higher the maximum power density (Pmax) obtained. The Pmax of anodes with 4 mm pore (1.91 ± 0.15 W m-2) was 1.4 times higher than that of the non-perforated (1.37 ± 0.07 W m-2) and 0.5 mm pore anodes (1.39 ± 0.04 W m-2). Electricigens can colonize into pore channels for at least 10 mm with a pore diameter ≥3 mm and current densities >0.05 A m-2. However, in the pores channel with 0.5 mm diameter, electricigens can only colonize to a depth of 2 mm. The biofilm thickness, electricity output, metabolic activity, and biocommunity changed with pore depth and were restricted by the limited mass transfer. The Geobacter sp. was the dominant species in inter-pore biofilms, with 43.8 %-78.6 % in abundance and decreased in quantity as pore depth increased. The inter-pore biofilms on the outer layer contributed a current density of 0.17 ± 0.003 A m-2, while that of the inner layer was only 0.02 ± 0.01 A m-2. Further studies found that the pore edge mass transfer effect can contribute up to 75 % of the current. The mass transfer process at the pore edge region could be a multidirectional mass transfer rather than a pore channel mass transfer.
Collapse
Affiliation(s)
- Pinpin Yang
- School of Environmental Science and Engineering, Academy of Ecology and Environment, Tianjin University, No 92 Weijin Road, Nankai District, 300072 Tianjin, China
| | - Yaqian Gao
- School of Environmental Science and Engineering, Academy of Ecology and Environment, Tianjin University, No 92 Weijin Road, Nankai District, 300072 Tianjin, China
| | - Naiyu Wang
- School of Environmental Science and Engineering, Academy of Ecology and Environment, Tianjin University, No 92 Weijin Road, Nankai District, 300072 Tianjin, China
| | - Yujie Zhu
- State Key Laboratory of Urban Water Resource and Environment, School of Environment, Harbin Institute of Technology, Harbin 150090, China
| | - Lefei Xue
- School of Environmental Science and Engineering, Academy of Ecology and Environment, Tianjin University, No 92 Weijin Road, Nankai District, 300072 Tianjin, China
| | - Yu Han
- School of Environmental Science and Engineering, Academy of Ecology and Environment, Tianjin University, No 92 Weijin Road, Nankai District, 300072 Tianjin, China
| | - Jia Liu
- School of Environmental Science and Engineering, Academy of Ecology and Environment, Tianjin University, No 92 Weijin Road, Nankai District, 300072 Tianjin, China
| | - Weihua He
- State Key Laboratory of Urban Water Resource and Environment, School of Environment, Harbin Institute of Technology, Harbin 150090, China.
| | - Yujie Feng
- School of Environmental Science and Engineering, Academy of Ecology and Environment, Tianjin University, No 92 Weijin Road, Nankai District, 300072 Tianjin, China
| |
Collapse
|
10
|
Vargas-Berrones K, Ocampo-Perez R, Rodríguez-Torres I, Medellín-Castillo NA, Flores-Ramírez R. Molecularly imprinted polymers (MIPs) as efficient catalytic tools for the oxidative degradation of 4-nonylphenol and its by-products. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2023; 30:90741-90756. [PMID: 37462867 DOI: 10.1007/s11356-023-28653-z] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/05/2022] [Accepted: 07/02/2023] [Indexed: 08/24/2023]
Abstract
Water pollution is a current global concern caused by emerging pollutants like nonylphenol (NP). This endocrine disruptor cannot be efficiently removed with traditional wastewater treatment plants (WTPs). Therefore, this work aimed to evaluate the adsorption influence of molecularly imprinted polymers (MIPs) on the oxidative degradation (ozone and ultraviolet irradiations) of 4-nonylphenol (4-NP) and its by-products as a coadjuvant in WTPs. MIPs were synthesized and characterized; the effect of the degradation rate under system operating conditions was studied by Box-Behnken response surface design of experiments. The variables evaluated were 4-NP concentration, ozone exposure time, pH, and MIP amount. Results show that the MIPs synthesized by co-precipitation and bulk polymerizations obtained the highest retention rates (> 90%). The maximum adsorption capacities for 4-NP were 201.1 mg L-1 and 500 mg L-1, respectively. The degradation percentages under O3 and UV conditions reached 98-100% at 120 s of exposure at different pHs. The degradation products of 4-NP were compounds with carboxylic and ketonic acids, and the MIP adsorption was between 50 and 60%. Our results present the first application of MIPs in oxidation processes for 4-NP, representing starting points for the use of highly selective materials to identify and remove emerging pollutants and their degradation by-products in environmental matrices.
Collapse
Affiliation(s)
- Karla Vargas-Berrones
- Instituto Tecnológico Superior de Rioverde, Ma del Rosario, San Ciro de Acosta-Rioverde 165, CP 79610, Rioverde, SLP, Mexico
| | - Raul Ocampo-Perez
- Centro de Investigación Y Estudios de Posgrado, Facultad de Ciencias Químicas, Universidad Autónoma de San Luis Potosí, 78260, San Luis Potosí, Mexico
| | - Israel Rodríguez-Torres
- Instituto de Metalurgia-Facultad de Ingeniería, Universidad Autónoma de San Luis Potosí, Av. Sierra Leona 550, Lomas 2a Sección, 78210, San Luis Potosí, San Luis Potosí, Mexico
| | - Nahúm A Medellín-Castillo
- Facultad de Ingeniería, Universidad Autónoma de San Luis Potosí, Av. Manuel Nava No. 8, 78290, San Luis Potosí, SLP, Mexico
| | - Rogelio Flores-Ramírez
- Coordinación Para La Innovación Y Aplicación de La Ciencia Y La Tecnología (CIACYT), Colonia Lomas Segunda Sección, Avenida Sierra Leona No. 550, CP 78210, San Luis Potosí, SLP, Mexico.
| |
Collapse
|
11
|
Zhao Y, Duan L, Hermanowicz SW. Influence of water transport characteristics on membrane internal conductive structure in forward osmosis microbial fuel cell. J Mol Liq 2023. [DOI: 10.1016/j.molliq.2023.121704] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 04/05/2023]
|
12
|
Jiang J, Lopez-Ruiz JA, Bian Y, Sun D, Yan Y, Chen X, Zhu J, May HD, Ren ZJ. Scale-up and techno-economic analysis of microbial electrolysis cells for hydrogen production from wastewater. WATER RESEARCH 2023; 241:120139. [PMID: 37270949 DOI: 10.1016/j.watres.2023.120139] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/09/2023] [Revised: 05/22/2023] [Accepted: 05/26/2023] [Indexed: 06/06/2023]
Abstract
Microbial electrolysis cells (MECs) have demonstrated high-rate H2 production while concurrently treating wastewater, but the transition in scale from laboratory research to systems that can be practically applied has encountered challenges. It has been more than a decade since the first pilot-scale MEC was reported, and in recent years, many attempts have been made to overcome the barriers and move the technology to the market. This study provided a detailed analysis of MEC scale-up efforts and summarized the key factors that should be considered to further develop the technology. We compared the major scale-up configurations and systematically evaluated their performance from both technical and economic perspectives. We characterized how system scale-up impacts the key performance metrics such as volumetric current density and H2 production rate, and we proposed methods to evaluate and optimize system design and fabrication. In addition, preliminary techno-economic analysis indicates that MECs can be profitable in many different market scenarios with or without subsidies. We also provide perspectives on future development needed to transition MEC technology to the marketplace.
Collapse
Affiliation(s)
- Jinyue Jiang
- Department of Civil and Environmental Engineering, Princeton University, Princeton, NJ 08544, USA; The Andlinger Center for Energy and the Environment, Princeton University, Princeton, NJ 08544, USA
| | - Juan A Lopez-Ruiz
- Pacific Northwest National Laboratory, Institute for Integrated Catalysis, Energy and Environment Directorate, 902 Battelle Blvd., Richland, WA 99352, USA
| | - Yanhong Bian
- Department of Civil and Environmental Engineering, Princeton University, Princeton, NJ 08544, USA; The Andlinger Center for Energy and the Environment, Princeton University, Princeton, NJ 08544, USA
| | - Dongya Sun
- Department of Civil and Environmental Engineering, Princeton University, Princeton, NJ 08544, USA; The Andlinger Center for Energy and the Environment, Princeton University, Princeton, NJ 08544, USA
| | - Yuqing Yan
- Department of Civil and Environmental Engineering, Princeton University, Princeton, NJ 08544, USA; The Andlinger Center for Energy and the Environment, Princeton University, Princeton, NJ 08544, USA
| | - Xi Chen
- Department of Civil and Environmental Engineering, Princeton University, Princeton, NJ 08544, USA; The Andlinger Center for Energy and the Environment, Princeton University, Princeton, NJ 08544, USA
| | - Junjie Zhu
- Department of Civil and Environmental Engineering, Princeton University, Princeton, NJ 08544, USA; The Andlinger Center for Energy and the Environment, Princeton University, Princeton, NJ 08544, USA
| | - Harold D May
- The Andlinger Center for Energy and the Environment, Princeton University, Princeton, NJ 08544, USA
| | - Zhiyong Jason Ren
- Department of Civil and Environmental Engineering, Princeton University, Princeton, NJ 08544, USA; The Andlinger Center for Energy and the Environment, Princeton University, Princeton, NJ 08544, USA.
| |
Collapse
|
13
|
Aleid GM, Alshammari AS, Alomari AD, A. Almukhlifi H, Ahmad A, Yaqoob AA. Dual Role of Sugarcane Waste in Benthic Microbial Fuel to Produce Energy with Degradation of Metals and Chemical Oxygen Demand. Processes (Basel) 2023. [DOI: 10.3390/pr11041060] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 04/05/2023] Open
Abstract
One of the most advanced systems of microbial fuel cells is the benthic microbial fuel cell (BMFC). Despite several developments, this strategy still has a number of significant flaws, such as instable organic substrate. Waste material (sugarcane) is used as a substrate in this work to address the organic substrate instability. The process was operated continuously for 70 days. A level of 300 mV was achieved after 33 days of operation, while the degradation efficiencies of Pb (II), Cd (II), and Cr (III) were more than 90%. More than 90% of the removed chemical oxygen demand (COD) was also recorded. The measured power density was 3.571 mW/m2 at 1000 external resistance with 458 internal resistance. This demonstrates that electrons are effectively transported throughout the operation. The Bacillus strains are the most dominant bacterial community on the surface of the anode. This research’s mechanism, which involves metal ion degradation, is also explained. Finally, parameter optimization indicated that pH 7 works efficiently. In addition to that, there are some future perspectives and concluding remarks enclosed.
Collapse
Affiliation(s)
- Ghada Mohamed Aleid
- B.Sc. Department, Preparatory Year College, University of Ha’il, Hail 55475, Saudi Arabia
| | - Anoud Saud Alshammari
- Department of Physics and Chemistry, Northern Border University, Rafha 76313, Saudi Arabia
| | - Asma D. Alomari
- Chemistry Department, Al-Qunfudah University College, Umm Al-Qura University, Al-Qunfudah 28821, Saudi Arabia
| | - Hanadi A. Almukhlifi
- Department of Chemistry, Faculty of Science, University of Tabuk, Tabuk 71491, Saudi Arabia
| | - Akil Ahmad
- Department of Chemistry, College of Science and Humanities in Al-Kharj, Prince Sattam bin Abdulaziz University, Al-Kharj 11942, Saudi Arabia
| | | |
Collapse
|
14
|
Madondo NI, Rathilal S, Bakare BF, Tetteh EK. Effect of Electrode Spacing on the Performance of a Membrane-Less Microbial Fuel Cell with Magnetite as an Additive. Molecules 2023; 28:molecules28062853. [PMID: 36985825 PMCID: PMC10058918 DOI: 10.3390/molecules28062853] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/10/2023] [Revised: 03/14/2023] [Accepted: 03/20/2023] [Indexed: 03/30/2023] Open
Abstract
A microbial fuel cell (MFC) is a bioelectrochemical system that can be employed for the generation of electrical energy under microbial activity during wastewater treatment practices. The optimization of electrode spacing is perhaps key to enhancing the performance of an MFC. In this study, electrode spacing was evaluated to determine its effect on the performance of MFCs. The experimental work was conducted utilizing batch digesters with electrode spacings of 2.0 cm, 4.0 cm, 6.0 cm, and 8.0 cm. The results demonstrate that the performance of the MFC improved when the electrode spacing increased from 2.0 to 6.0 cm. However, the efficiency decreased after 6.0 cm. The digester with an electrode spacing of 6.0 cm enhanced the efficiency of the MFC, which led to smaller internal resistance and greater biogas production of 662.4 mL/g VSfed. The electrochemical efficiency analysis demonstrated higher coulombic efficiency (68.7%) and electrical conductivity (177.9 µS/cm) for the 6.0 cm, which was evident from the enrichment of electrochemically active microorganisms. With regards to toxic contaminant removal, the same digester also performed well, revealing removals of over 83% for chemical oxygen demand (COD), total solids (TS), total suspended solids (TSS), and volatile solids (VS). Therefore, these results indicate that electrode spacing is a factor affecting the performance of an MFC, with an electrode spacing of 6.0 cm revealing the greatest potential to maximize biogas generation and the degradability of wastewater biochemical matter.
Collapse
Affiliation(s)
- Nhlanganiso Ivan Madondo
- Green Engineering Research Group, Department of Chemical Engineering, Faculty of Engineering and the Built Environment, Durban University of Technology, Steve Biko Campus, S4 Level 1, Durban 4000, South Africa
| | - Sudesh Rathilal
- Green Engineering Research Group, Department of Chemical Engineering, Faculty of Engineering and the Built Environment, Durban University of Technology, Steve Biko Campus, S4 Level 1, Durban 4000, South Africa
| | - Babatunde Femi Bakare
- Environmental Pollution and Remediation Research Group, Department of Chemical Engineering, Faculty of Engineering, Mangosuthu University of Technology, P.O. Box 12363, Durban 4026, South Africa
| | - Emmanuel Kweinor Tetteh
- Green Engineering Research Group, Department of Chemical Engineering, Faculty of Engineering and the Built Environment, Durban University of Technology, Steve Biko Campus, S4 Level 1, Durban 4000, South Africa
| |
Collapse
|
15
|
Application of Magnetite-Nanoparticles and Microbial Fuel Cell on Anaerobic Digestion: Influence of External Resistance. Microorganisms 2023; 11:microorganisms11030643. [PMID: 36985216 PMCID: PMC10055030 DOI: 10.3390/microorganisms11030643] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/31/2023] [Revised: 02/20/2023] [Accepted: 02/27/2023] [Indexed: 03/06/2023] Open
Abstract
In this paper, the application of magnetite-nanoparticles and a microbial fuel cell (MFC) was studied on the anaerobic digestion (AD) of sewage sludge. The experimental set-up included six 1 L biochemical methane potential (BMP) tests with different external resistors: (a) 100 Ω, (b) 300 Ω, (c) 500 Ω, (d) 800 Ω, (e) 1000 Ω, and (f) a control with no external resistor. The BMP tests were carried out using digesters with a working volume of 0.8 L fed with 0.5 L substrate, 0.3 L inoculum, and 0.53 g magnetite-nanoparticles. The results suggested that the ultimate biogas generation reached 692.7 mL/g VSfed in the 500 Ω digester, which was substantially greater than the 102.6 mL/g VSfed of the control. The electrochemical efficiency analysis also demonstrated higher coulombic efficiency (81.2%) and maximum power density (30.17 mW/ m2) for the 500 Ω digester. The digester also revealed a higher maximum voltage generation of 0.431 V, which was approximately 12.7 times the 0.034 V of the lowest-performing MFC (100 Ω digester). In terms of contaminants removed, the best-performing digester was the digester with 500 Ω, which reduced contaminants by more than 89% on COD, TS, VS, TSS and color. In terms of cost-benefit analysis, this digester produced the highest annual energy profit (48.22 ZAR/kWh or 3.45 USD/kWh). This infers the application of magnetite-nanoparticles and MFC on the AD of sewage sludge is very promising for biogas production. The digester with an external resistor of 500 Ω showed a high potential for use in bioelectrochemical biogas generation and contaminant removal for sewage sludge.
Collapse
|
16
|
Jiad MM, Abbar AH. Treatment of Petroleum Refinery Wastewater by Electrofenton process using a Low Cost Porous Graphite Air-diffusion Cathode with a Novel Design. Chem Eng Res Des 2023. [DOI: 10.1016/j.cherd.2023.03.021] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/18/2023]
|
17
|
Saran C, Purchase D, Saratale GD, Saratale RG, Romanholo Ferreira LF, Bilal M, Iqbal HMN, Hussain CM, Mulla SI, Bharagava RN. Microbial fuel cell: A green eco-friendly agent for tannery wastewater treatment and simultaneous bioelectricity/power generation. CHEMOSPHERE 2023; 312:137072. [PMID: 36336023 DOI: 10.1016/j.chemosphere.2022.137072] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/15/2022] [Revised: 10/27/2022] [Accepted: 10/28/2022] [Indexed: 06/16/2023]
Abstract
This review paper emphasised on the origin of hexavalent chromium toxicity in tannery wastewater and its remediation using novel Microbial Fuel Cell (MFC) technology, including electroactive bacteria, which are known as exoelectrogens, to simultaneously treat wastewater and its action in the production of bioenergy and the mechanism of Cr6+ reduction. Also, there are various parameters like electrode, pH, mode of operation, time of operation, and type of exchange membrane used for promising results shown in enhancing MFC production and remediation of Cr6+. Destructive anthropological activities, such as leather making and electroplating industries are key sources of hexavalent chromium contamination in aquatic repositories. When Cr6+ enters the food chain and enters the human body, it has the potential to cause cancer. MFC is a green innovation that generates energy economically through the reduction of toxic Cr6+ to less toxic Cr3+. The organic substrates utilized at the anode of MFC act as electrons (e-) donors. This review also highlighted the utilization of cheap substrates to make MFCs more economically suitable and the energy production at minimum cost.
Collapse
Affiliation(s)
- Christina Saran
- Laboratory of Bioremediation and Metagenomics Research (LBMR), Department of Environmental Microbiology (DEM), Babasaheb Bhimrao Ambedkar University (A Central University), Vidya Vihar, Raebareli Road, Lucknow, (U.P.), India, 226 025
| | - Diane Purchase
- Department of Natural Sciences, Faculty of Science and Technology, Middlesex University, The Burroughs, Hendon, London, NW4 4BT, England, United Kingdom
| | - Ganesh Dattatraya Saratale
- Department of Food Science and Biotechnology, Dongguk University, Seoul, Ilsandong-gu, Goyang-si, Gyeonggi-do, 10326, Republic of Korea
| | - Rijuta Ganesh Saratale
- Research Institute of Integrative Life Sciences, Dongguk University-Seoul, Ilsandong-gu, Goyang-si, Gyeonggido 10326, Republic of Korea
| | - Luiz Fernando Romanholo Ferreira
- Waste and Effluent Treatment Laboratory, Institute of Technology and Research (ITP), Tiradentes University, Farolândia, Aracaju, SE, 49032-490, Brazil; Graduate Program in Process Engineering, Tiradentes University (UNIT), Av. Murilo Dantas, 300, Farolândia, 49032-490, Aracaju, Sergipe, Brazil
| | - Muhammad Bilal
- Institute of Chemical Technology and Engineering, Faculty of Chemical Technology, Poznan University of Technology, Berdychowo 4, PL-60695 Poznan, Poland
| | - Hafiz M N Iqbal
- Tecnologico de Monterrey, School of Engineering and Sciences, Campus Monterrey, Ave. Eugenio Garza Sada 2501, Monterrey, N.L., CP 64849, Mexico
| | - Chaudhery Mustansar Hussain
- Department of Chemistry and Environmental Science, New Jersey Institute of Technology, Newark, NJ, 07102, USA
| | - Sikandar I Mulla
- Department of Biochemistry, School of Allied Health Sciences, REVA University, Bangalore, India
| | - Ram Naresh Bharagava
- Laboratory of Bioremediation and Metagenomics Research (LBMR), Department of Environmental Microbiology (DEM), Babasaheb Bhimrao Ambedkar University (A Central University), Vidya Vihar, Raebareli Road, Lucknow, (U.P.), India, 226 025.
| |
Collapse
|
18
|
Sonawane JM, Mahadevan R, Pandey A, Greener J. Recent progress in microbial fuel cells using substrates from diverse sources. Heliyon 2022; 8:e12353. [PMID: 36582703 PMCID: PMC9792797 DOI: 10.1016/j.heliyon.2022.e12353] [Citation(s) in RCA: 9] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/09/2022] [Revised: 11/09/2022] [Accepted: 12/07/2022] [Indexed: 12/23/2022] Open
Abstract
Increasing untreated environmental outputs from industry and the rising human population have increased the burden of wastewater and other waste streams on the environment. The most prevalent wastewater treatment methods include the activated sludge process, which requires aeration and is, therefore, energy and cost-intensive. The current trend towards a circular economy facilitates the recovery of waste materials as a resource. Along with the amount, the complexity of wastewater is increasing day by day. Therefore, wastewater treatment processes must be transformed into cost-effective and sustainable methods. Microbial fuel cells (MFCs) use electroactive microbes to extract chemical energy from waste organic molecules to generate electricity via waste treatment. This review focuses use of MFCs as an energy converter using wastewater from various sources. The different substrate sources that are evaluated include industrial, agricultural, domestic, and pharmaceutical types. The article also highlights the effect of operational parameters such as organic load, pH, current, and concentration on the MFC output. The article also covers MFC functioning with respect to the substrate, and the associated performance parameters, such as power generation and wastewater treatment matrices, are given. The review also illustrates the success stories of various MFC configurations. We emphasize the significant measures required to fill in the gaps related to the effect of substrate type on different MFC configurations, identification of microbes for use as biocatalysts, and development of biocathodes for the further improvement of the system. Finally, we shortlisted the best performing substrates based on the maximum current and power, Coulombic efficiency, and chemical oxygen demand removal upon the treatment of substrates in MFCs. This information will guide industries that wish to use MFC technology to treat generated effluent from various processes.
Collapse
Affiliation(s)
- Jayesh M. Sonawane
- Department of Chemical Engineering and Applied Chemistry, University of Toronto M5S 3E5, Canada
- Département de Chimie, Faculté des Sciences et de génie, Université Laval, Québec City, QC, Canada
| | - Radhakrishnan Mahadevan
- Department of Chemical Engineering and Applied Chemistry, University of Toronto M5S 3E5, Canada
| | - Ashok Pandey
- Centre for Innovation and Translational Research, CSIR-Indian Institute of Toxicology Research, Lucknow, 226 001, India
- Centre for Energy and Environmental Sustainability, Lucknow, 226 029, India
| | - Jesse Greener
- Département de Chimie, Faculté des Sciences et de génie, Université Laval, Québec City, QC, Canada
- CHU de Québec, Centre de recherche, Université Laval, 10 rue de l'Espinay, Québec, QC, Canada
| |
Collapse
|
19
|
Li S, Gao M, Dong H, Jiang Y, Liang W, Jiang J, Ho SH, Li F. Deciphering the fate of antibiotic resistance genes in norfloxacin wastewater treated by a bio-electro-Fenton system. BIORESOURCE TECHNOLOGY 2022; 364:128110. [PMID: 36252757 DOI: 10.1016/j.biortech.2022.128110] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/07/2022] [Revised: 10/04/2022] [Accepted: 10/07/2022] [Indexed: 06/16/2023]
Abstract
The misuse of antibiotics has increased the prevalence of antibiotic resistance genes (ARGs), considered a class of critical environmental contaminants due to their ubiquitous and persistent nature. Previous studies reported the potentiality of bio-electro-Fenton processes for antibiotic removal and ARGs control. However, the production and fate of ARGs in bio-electro-Fenton processes triggered by microbial fuel cells are rare. In this study, the norfloxacin (NFLX) average residual concentrations within two days were 2.02, 6.07 and 14.84 mg/L, and the average removal efficiency of NFLX was 79.8 %, 69.6 % and 62.9 % at the initial antibiotic concentrations of 10, 20 and 40 mg/L, respectively. The most prevalent resistance gene type in all processes was the fluoroquinolone antibiotic gene. Furthermore, Proteobacteria was the dominant ARG-carrying bacteria. Overall, this study can provide theoretical support for the efficient treatment of high antibiotics-contained wastewater by bio-electro-Fenton systems to better control ARGs from the perspective of ecological security.
Collapse
Affiliation(s)
- Shengnan Li
- College of Environmental Science and Engineering, Nankai University, 38 Tongyan Road, Jinnan District, Tianjin 300350, China; State Key Laboratory of Urban Water Resource and Environment, School of Environment, Harbin Institute of Technology, Harbin, Heilongjiang Province 150090, China
| | - Mingsi Gao
- College of Environmental Science and Engineering, Nankai University, 38 Tongyan Road, Jinnan District, Tianjin 300350, China
| | - Heng Dong
- College of Environmental Science and Engineering, Nankai University, 38 Tongyan Road, Jinnan District, Tianjin 300350, China
| | - Yuxin Jiang
- College of Environmental Science and Engineering, Nankai University, 38 Tongyan Road, Jinnan District, Tianjin 300350, China
| | - Wanting Liang
- College of Environmental Science and Engineering, Nankai University, 38 Tongyan Road, Jinnan District, Tianjin 300350, China
| | - Jiwei Jiang
- College of Environmental Science and Engineering, Nankai University, 38 Tongyan Road, Jinnan District, Tianjin 300350, China
| | - Shih-Hsin Ho
- State Key Laboratory of Urban Water Resource and Environment, School of Environment, Harbin Institute of Technology, Harbin, Heilongjiang Province 150090, China
| | - Fengxiang Li
- College of Environmental Science and Engineering, Nankai University, 38 Tongyan Road, Jinnan District, Tianjin 300350, China.
| |
Collapse
|
20
|
Rossi R, Logan BE. Impact of reactor configuration on pilot-scale microbial fuel cell performance. WATER RESEARCH 2022; 225:119179. [PMID: 36206685 DOI: 10.1016/j.watres.2022.119179] [Citation(s) in RCA: 12] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/22/2022] [Revised: 08/02/2022] [Accepted: 09/27/2022] [Indexed: 06/16/2023]
Abstract
Different microbial fuel cell (MFC) configurations have been successfully operated at pilot-scale levels (>100 L) to demonstrate electricity generation while accomplishing domestic or industrial wastewater treatment. Two cathode configurations have been primarily used based on either oxygen transfer by aeration of a liquid catholyte or direct oxygen transfer using air-cathodes. Analysis of several pilot-scale MFCs showed that air-cathode MFCs outperformed liquid catholyte reactors based on power density, producing 233% larger area-normalized power densities and 181% higher volumetric power densities. Reactors with higher electrode packing densities improved performance by enabling larger power production while minimizing the reactor footprint. Despite producing more power than the liquid catholyte MFCs, and reducing energy consumption for catholyte aeration, pilot MFCs based on air-cathode configuration failed to produce effluents with chemical oxygen demand (COD) levels low enough to meet typical threshold for discharge. Therefore, additional treatment would be required to further reduce the organic matter in the effluent to levels suitable for discharge. Scaling up MFCs must incorporate designs that can minimize electrode and solution resistances to maximize power and enable efficient wastewater treatment.
Collapse
Affiliation(s)
- Ruggero Rossi
- Department of Civil and Environmental Engineering, The Pennsylvania State University, University Park, PA 16802, USA.
| | - Bruce E Logan
- Department of Civil and Environmental Engineering, The Pennsylvania State University, University Park, PA 16802, USA
| |
Collapse
|
21
|
Zhao Y, Duan L. Research on Measuring Pure Membrane Electrical Resistance under the Effects of Salinity Gradients and Diffusion Boundary Layer and Double Layer Resistances. MEMBRANES 2022; 12:membranes12080816. [PMID: 36005731 PMCID: PMC9412548 DOI: 10.3390/membranes12080816] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/03/2022] [Revised: 08/17/2022] [Accepted: 08/17/2022] [Indexed: 06/02/2023]
Abstract
Forward osmosis membranes are an emerging technology with great potential applicability in energy-efficient wastewater treatments and the differentiation between two solutions. Such solutions often differ in their concentrations or compositions. In this study, the membrane electrical resistances of three different membranes, including cation or anion-exchange membranes and forward osmosis membranes, were analyzed by Luggin capillary coupled with AC impedance spectroscopy (EIS) so as to obtain the real membrane and ion transfer impedance values near the membrane interface. The results reveal that the membrane impedance obtained by both the DC and AC approaches decreased as the lowest external solution concentration increased. Furthermore, the relationship between the membrane conductivity and the internal salt solution concentration was also investigated. It can be seen that the external ion concentration is directly proportional to the free ion concentration in the membrane, and the free ion concentration in the membrane is closely related to the membrane electrical resistance.
Collapse
Affiliation(s)
- Yang Zhao
- State Key Joint Laboratory of Environment Simulation and Pollution Control, School of Environment, Tsinghua University, Beijing 100084, China
| | - Liang Duan
- Chinese Research Academy of Environmental Sciences, Beijing 100012, China
| |
Collapse
|
22
|
Al Rasbi AWYA, Devi MG, Chandrasekhar G. Synthesis and application of silica and calcium carbonate nanoparticles in the reduction of organics from refinery wastewater. J INDIAN CHEM SOC 2022. [DOI: 10.1016/j.jics.2022.100519] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/26/2022]
|
23
|
Experimental Study of Power Generation and COD Removal Efficiency by Air Cathode Microbial Fuel Cell Using Shewanella baltica 20. ENERGIES 2022. [DOI: 10.3390/en15114152] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
Microbial fuel cells (MFCs) are a kind of bioreactor for generating electricity, facilitated by exoelectrogens while treating wastewater. The present article focuses on the performance of an air cathode plexiglass MFC in terms of chemical oxygen demand (COD) removal efficiency and power output by performing two sets of experiments. The proton exchange membrane and electrode materials were Nafion 117 and carbon felts, whereas, for stable biofilm formation on the anode surface, a pure culture of Shewanella baltica 20 was used. Firstly, sterile Luria-Bertani (LB) media containing lactate, ranging from 20 to 100 mM, was continuously fed to an MFC, and a maximum power density of 55 mW/m2 was observed. Similarly, artificial wastewater with COD ranging from 3250 mg/L to 10,272 mg/L was supplied to the MFC in the second set of experiments. In this case, the maximum power density and COD removal efficiency were 12 mW/m2 and 57%, respectively. In both cases, the hydraulic retention time (HRT) was 1.5 h. It was found that electricity generation depends on the characteristics of the wastewater. These initial findings confirm that the design aspects of an MFC, i.e., surface area to volume ratio, and external resistance with respect to the quality of influent need to be optimised to improve the MFC’s performance.
Collapse
|
24
|
Kong Z, Zhou Y, Fu Z, Zhang Y, Yan R. Mechanism of stable power generation and nitrogen removal in the ANAMMOX-MFC treating low C/N wastewater. CHEMOSPHERE 2022; 296:133937. [PMID: 35167835 DOI: 10.1016/j.chemosphere.2022.133937] [Citation(s) in RCA: 10] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/10/2021] [Revised: 01/14/2022] [Accepted: 02/07/2022] [Indexed: 06/14/2023]
Abstract
This study investigated the mechanism of enhanced power generation and nitrogen removal in an ANAMMOX-MFC reactor through subsequent acetate addition. Data showed that nearly 99% total nitrogen removal (≤1 mg L-1) and 1.41 W m-3 power generation were achieved synchronously under low COD/N (∼1.5) after the subsequent addition of acetate (100 mgCOD·L-1). The columbic efficiency of the system has increased by 15 times (from 0.64% to 9.48%) after adding acetate. Batch tests showed that the denitrification and ANAMMOX progress occurred synchronously before acetate addition the nitrogen removal rate was accelerated. A distinct shift of bacterial community driven by acetate addition was discovered. The high throughput sequencing analysis indicated acetate addition stimulated the enrichment of denitrifiers, such as Aquimonas, Bradyrhizobium, Thauera, and the potential exoelectrogens changing from Comamonas to Pseudomonas. Functional genes forecasts based on KEGG database and COG database showed that the expressions of TCA functional genes were highly promoted in ANAMMOX-MFC, which demonstrated the enhanced electron transfer pathway driven by acetate addition under low COD/N ratio.
Collapse
Affiliation(s)
- Zhiyuan Kong
- Key Laboratory of Environmental Pollution Control and Waste Resource Recycle, School of Ecology and Environment, Inner Mongolia University, Hohhot, 010031, China; Key Laboratory of Water and Sediment Sciences of Ministry of Education, State Key Laboratory of Water Environment Simulation, School of Environment, Beijing Normal University, Beijing, 100875, China
| | - Yongheng Zhou
- Key Laboratory of Environmental Pollution Control and Waste Resource Recycle, School of Ecology and Environment, Inner Mongolia University, Hohhot, 010031, China
| | - Zhimin Fu
- Key Laboratory of Environmental Pollution Control and Waste Resource Recycle, School of Ecology and Environment, Inner Mongolia University, Hohhot, 010031, China.
| | - Yuancan Zhang
- Key Laboratory of Environmental Pollution Control and Waste Resource Recycle, School of Ecology and Environment, Inner Mongolia University, Hohhot, 010031, China
| | - Rong Yan
- Key Laboratory of Environmental Pollution Control and Waste Resource Recycle, School of Ecology and Environment, Inner Mongolia University, Hohhot, 010031, China
| |
Collapse
|
25
|
Effect of an Electromagnetic Field on Anaerobic Digestion: Comparing an Electromagnetic System (ES), a Microbial Electrolysis System (MEC), and a Control with No External Force. Molecules 2022; 27:molecules27113372. [PMID: 35684310 PMCID: PMC9182473 DOI: 10.3390/molecules27113372] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/24/2022] [Revised: 05/09/2022] [Accepted: 05/20/2022] [Indexed: 11/17/2022] Open
Abstract
This study examined the application of an electromagnetic field to anaerobic digestion by using an electromagnetic system (ES), a microbial electrolysis cell (MEC), and a control with no external force. The experimental work was performed by carrying out biochemical methane potential (BMP) tests using 1 L biodigesters. The bioelectrochemical digesters were supplied with 0.4 V for 30 days at 40 °C. The electromagnetic field of the ES was generated by coiling copper wire to form a solenoid in the BMP system, whereas the MEC consisted of zinc and copper electrodes inside the BMP system. The best performing system was the MEC, with a yield of 292.6 mL CH4/g chemical oxygen demand removed (CODremoved), methane content of 86%, a maximum current density of 23.3 mA/m2, a coulombic efficiency of 110.4%, and an electrical conductivity of 180 µS/cm. Above 75% removal of total suspended solids (TSS), total organic carbon (TOC), phosphate, and ammonia nitrogen (NH3-N) was also recorded. However, a longer exposure (>8 days) to higher magnetic intensity (6.24 mT) on the ES reduced its overall performance. In terms of energy, the MEC produced the greatest annual energy profit (327.0 ZAR/kWh or 23.36 USD/kWh). The application of an electromagnetic field in anaerobic digestion, especially a MEC, has the potential to maximize the methane production and the degradability of the wastewater organic content.
Collapse
|
26
|
Indigenous bio-bed technology with electrical cells for Nitrogen removal from river Water. Chem Eng Res Des 2022. [DOI: 10.1016/j.cherd.2022.05.020] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/19/2022]
|
27
|
Ni J, Steinberger-Wilckens R, Jiang S, Xu M, Wang Q. Novel study on microbial fuel cells via a comprehensive bibliometric and dynamic approach. REVIEWS ON ENVIRONMENTAL HEALTH 2022; 37:13-27. [PMID: 33975416 DOI: 10.1515/reveh-2020-0123] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/13/2020] [Accepted: 04/06/2021] [Indexed: 06/12/2023]
Abstract
Microbial fuel cells (MFCs) are eco-friendly and useful bioelectrical devices that harness the natural metabolisms of microbes to produce electrical power directly from organic materials. In this study, a bibliometric analysis is conducted to evaluate MFC research from 2001 to 2018 on the basis of the Science Citation Index Expanded database. Overall, MFC research has experienced a dramatic increase over last 18 years, with an exponential growth in the accumulated number of publications. Most publications are closely related to the industrialization and commoditization of MFCs, along with environmental issues, which are currently the biggest global challenges in MFC studies. A small proportion (4.34%) of the scientific journals published more than half (54.34%) of the total articles in the MFC field. Articles from the top 10 countries/regions accounted for the majority (83.16%) of the total articles, clearly indicating that advanced MFC technologies are currently dominated by these countries/regions. Moreover, an increasing number of MFC researchers are considering two-chamber and three-chamber MFC reactions. In particular, they are focusing on environmental technology instead of merely improving the efficiency of electricity generation. Materials research in the MFC field is still a popular area worldwide, and many researchers have focused on novel and eco-friendly cathode and anode developments. Meanwhile, only a few MFC studies are concerned with biological research.
Collapse
Affiliation(s)
- Jin Ni
- Department of Environmental Engineering, University of Science and Technology Beijing, Beijing, China
- School of Chemical Engineering, College of Engineering and Physical Sciences, University of Birmingham, Birmingham, UK
| | - Robert Steinberger-Wilckens
- School of Chemical Engineering, College of Engineering and Physical Sciences, University of Birmingham, Birmingham, UK
| | - Shanxue Jiang
- State Environmental Protection Key Laboratory of Food Chain Pollution Control, Beijing Technology and Business University, Beijing, China
- Key Laboratory of Cleaner Production and Integrated Resource Utilization of China National Light Industry, Beijing Technology and Business University, Beijing, China
| | - Mingyue Xu
- Department of Environmental Engineering, University of Science and Technology Beijing, Beijing, China
| | - Qunhui Wang
- Department of Environmental Engineering, University of Science and Technology Beijing, Beijing, China
| |
Collapse
|
28
|
Study on the Effect of Water Flux in Osmotic Microbial Fuel Cells on Membrane Water Content and Resistance. WATER 2022. [DOI: 10.3390/w14060848] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/06/2023]
Abstract
Osmotic microbial fuel cells (OsMFCs) can integrate forward osmosis into microbial fuel cells (MFCs), which are able to perform organic elimination, bioenergy production, and high-class water abstraction from wastewater. However, it is not well understood how the unique feature of OsMFCs, i.e., water flux, helps improve current generation. Based on experimental studies and the Springer model theory, a new method for representing water transmission in OsMFC membranes is put forward that considers water transmission by electro-osmosis resulting from proton flux through the membrane and by osmosis resulting from osmotic pressure grades of water. In this research, osmotic water transmission is associated with the permeable differential pressure resulting from the ionic differential concentration in the membrane, and electro-osmotic water transmission is found to be proportional to the current density employed but irrelevant to the composition gradients. The net water transmission in OsMFC depends on the operation time and increases accordingly with higher current density and composition gradients. Furthermore, the membrane’s proton conductibility and water-transmission capabilities are significantly affected by the moisture content, which decreases from the negative electrode to the positive electrode in the OsMFC system. Increasing water flux with higher osmotic pressure and current density is therefore able to diminish the resistance of the membrane.
Collapse
|
29
|
Joel Koffi N, Okabe S. Effect of poised cathodic potential on anodic ammonium nitrogen removal from domestic wastewater by air-cathode microbial fuel cells. BIORESOURCE TECHNOLOGY 2022; 348:126807. [PMID: 35124217 DOI: 10.1016/j.biortech.2022.126807] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/08/2021] [Revised: 01/27/2022] [Accepted: 01/28/2022] [Indexed: 06/14/2023]
Abstract
Performances of anodic ammonia oxidation have been investigated for various bioelectrochemical systems at a wide range of poised anodic potentials in the literature. The effect of poised cathodic potential on ammonium nitrogen (NH4+-N) and total nitrogen (TN, sum of NH4+-N, NO2--N, and NO3--N) removal from domestic wastewater by single chamber air-cathode microbial fuel cells (MFCs) was investigated. Poising the air-cathode potential at +0.7 V vs. SHE significantly increased current generation (from 11 ± 1 mA to 22.8 ± 5 mA) and oxygen permeation into the MFC through the air-cathode (from 75.4 ± 1.2 g-O2/m3/d to 151 ± 3.7 g-O2/m3/d), which consequently resulted in a high NH4+-N removal rate of 150 ± 13 g-NH4+-N/m3/d and TN removal rate of 63 ± 16 g-TN/m3/d. These high NH4+-N and TN removal rates could be attributed to the enhancement of dual respiratory pathways: the electrode-assisted anodic and aerobic NH4+ oxidation.
Collapse
Affiliation(s)
- N'dah Joel Koffi
- Division of Environmental Engineering, Faculty of Engineering, Hokkaido University, North-13, West-8, Kita-ku, Sapporo, Hokkaido 060-8628, Japan
| | - Satoshi Okabe
- Division of Environmental Engineering, Faculty of Engineering, Hokkaido University, North-13, West-8, Kita-ku, Sapporo, Hokkaido 060-8628, Japan.
| |
Collapse
|
30
|
Mohyudin S, Farooq R, Jubeen F, Rasheed T, Fatima M, Sher F. Microbial fuel cells a state-of-the-art technology for wastewater treatment and bioelectricity generation. ENVIRONMENTAL RESEARCH 2022; 204:112387. [PMID: 34785206 DOI: 10.1016/j.envres.2021.112387] [Citation(s) in RCA: 20] [Impact Index Per Article: 10.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/18/2021] [Revised: 10/17/2021] [Accepted: 11/12/2021] [Indexed: 06/13/2023]
Abstract
Wastewater treatment and electricity generation have been the major concerns for the last few years. The scarcity of fossil fuels has led to the development of unconventional energy resources that are pollution-free. Microbial fuel cell (MFC) is an environmental and eco-friendly technology that harvests energy through the oxidation of organic substrates and transform into the electric current with the aid of microorganisms as catalysts. This review presents power output and colour removal values by designing various configurations of MFCs and highlights the importance of materials for the fabrication of anode and cathode electrodes playing vital roles in the formation of biofilm and redox reactions taking place in both chambers. The electron transfer mechanism from microbes towards the electrode surface and the generation of electric current are also highlighted. The effect of various parameters affecting the cell performance such as type and amount of substrate, pH and temperature maintained within the chambers have also been discussed. Although this technology presents many advantages, it still needs to be used in combination with other processes to enhance power output.
Collapse
Affiliation(s)
- Sidra Mohyudin
- Department of Chemistry, Government College Women University, Faisalabad, 38000, Pakistan
| | - Robina Farooq
- Department of Chemistry, Government College Women University, Faisalabad, 38000, Pakistan; Department of Chemistry, COMSATS University, Islamabad, Lahore, Pakistan
| | - Farhat Jubeen
- Department of Chemistry, Government College Women University, Faisalabad, 38000, Pakistan
| | - Tahir Rasheed
- Interdisciplinary Research Center for Advanced Materials, King Fahd University of Petroleum and Minerals (KFUPM), Dhahran, 31261, Saudi Arabia.
| | - Masoom Fatima
- Department of Chemistry, Government College Women University, Faisalabad, 38000, Pakistan; Department of Biology and Environmental Science, Allama Iqbal Open University, Islamabad, 44000, Pakistan
| | - Farooq Sher
- Department of Engineering, School of Science and Technology, Nottingham Trent University, Nottingham, NG11 8NS, United Kingdom.
| |
Collapse
|
31
|
Sundramurthy VP, Nithya TG, Masi C, Gomadurai C, M. Abda E. Recent advances and prospects for industrial waste management and product recovery for environmental appliances. PHYSICAL SCIENCES REVIEWS 2021. [DOI: 10.1515/psr-2021-0063] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/15/2022]
Abstract
Abstract
Any material when utilized for a required period of time and segment, the leftover residues of those materials are known as waste. Enormous waste is generated during such wear and tear process of materials depending on the usage and functions in a routine lifestyle. Those generated waste when overloaded beyond the capacity of natural recycling processes, would influence the environment and human health. Hence, the waste generated from used materials should be managed according to the environmental impact. Even though wastes are also sometimes rich in organic compounds, nutrients, and energy resources, they are not experimented and managed appropriately. Recently, different feasible techniques are invented and followed to recover and reuse the efficient resources that can create and support sustainable livelihood by creating green economy effects by reducing waste. In this chapter, the emphasis has been given to providing an overview of recent advancements on bio-based waste management and product recoveries such as microbes mediated approaches, biorefineries for waste valorization, and bioenergy from industrial waste.
Collapse
Affiliation(s)
- Venkatesa Prabhu Sundramurthy
- Department of Chemical Engineering , Center of Excellence for Bioprocess and Biotechnology, Addis Ababa Science and Technology University , Addis Ababa , Ethiopia
| | - Thirumullaivoyal G. Nithya
- Department of Biotechnology , College of Science and Humanities, SRM Institute of Science and Technology , Kattankulathur , Tamil Nadu , 603203 , India
| | - Chandran Masi
- Department of Biotechnology , Addis Ababa Science and Technology University , Akaki Kality , Addis Ababa , P.O. Box: 16417 , Ethiopia
| | - Chinnasamy Gomadurai
- Department of Chemical Engineering , Kongu Engineering College , Perundurai , Erode , Tamil Nadu , 638060 , India
| | - Ebrahim M. Abda
- Department of Biotechnology , Addis Ababa Science and Technology University , Akaki Kality , Addis Ababa , P.O. Box: 16417 , Ethiopia
| |
Collapse
|
32
|
Yang N, Zhou Q, Zhan G, Liu Y, Luo H, Li D. Comparative evaluation of simultaneous nitritation/denitritation and energy recovery in air-cathode microbial fuel cells (ACMFCs) treating low C/N ratio wastewater. THE SCIENCE OF THE TOTAL ENVIRONMENT 2021; 788:147652. [PMID: 34023598 DOI: 10.1016/j.scitotenv.2021.147652] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/20/2021] [Revised: 04/25/2021] [Accepted: 05/05/2021] [Indexed: 06/12/2023]
Abstract
Air-cathode microbial fuel cells (ACMFCs) can extract available electrons from the low C/N ratio wastewater (LCNW) for pollutant degradation and power generation. However, the multiple effects of operating parameters and their relationship between the performances and parameters are still lacking. In this study, several ACMFCs for simultaneous nitritation/denitritation (SND) and energy recovery were constructed and evaluated in terms of chemical oxygen demand (COD), NH4+-N, C/N ratio, phosphate buffer solution (PBS), and external resistance (Rext), and several derived parameters (e.g., organic loading rate (OLR), nitrogen loading rate (NLR)). Results indicated that ACMFCs could be used to treat LCNW successfully with high pollutant removal rates and sustainable current generation. Maximum removal efficiencies of 94% COD, 92% NH4+-N, and 92% total nitrogen (TN) were achieved. A maximum power density of 1400 mW m-2 and columbic efficiency of 69.2% were also obtained at a low C/N ratio of 1.7-2.6. Low C/N ratios promoted SND by balancing nitritation and denitritation. The microbial community and their predicated function results showed considerable nitrifiers and denitrificans were enriched in the ACMFCs, contributing to SND and power recovery. Further analyses showed that the NH4+-N could inhibit SND, but PBS and Rext had no obvious effects on this outcome. Co-occurrence network analysis demonstrated that power is positively correlated with COD and Rext; strong correlations between organic removal and COD, and between nitrogen removal and ammonia, conductivity, and C/N ratio were also noted. Overall, the appropriate control of such parameters is necessary to achieve efficient SND in ACMFCs for LCNW treatment.
Collapse
Affiliation(s)
- Nuan Yang
- CAS Key Laboratory of Environmental and Applied Microbiology, Environmental Microbiology Key Laboratory of Sichuan Province, Chengdu Institute of Biology, Chinese Academy of Sciences, Chengdu 610041, China; Biogas Institute of Ministry of Agriculture and Rural Affairs, Sichuan Institute of Rural Human Settlements, Chengdu 610041, China; MOE Key Laboratory for Water Quality and Conservation of the Pearl River Delta, Institute of Environmental Research at Greater Bay, Guangzhou University, Guangzhou 510006, China
| | - Qinmao Zhou
- CAS Key Laboratory of Environmental and Applied Microbiology, Environmental Microbiology Key Laboratory of Sichuan Province, Chengdu Institute of Biology, Chinese Academy of Sciences, Chengdu 610041, China; University of Chinese Academy of Sciences, 100049 Beijing, China
| | - Guoqiang Zhan
- CAS Key Laboratory of Environmental and Applied Microbiology, Environmental Microbiology Key Laboratory of Sichuan Province, Chengdu Institute of Biology, Chinese Academy of Sciences, Chengdu 610041, China
| | - Yiliang Liu
- CAS Key Laboratory of Environmental and Applied Microbiology, Environmental Microbiology Key Laboratory of Sichuan Province, Chengdu Institute of Biology, Chinese Academy of Sciences, Chengdu 610041, China
| | - Huiqin Luo
- CAS Key Laboratory of Environmental and Applied Microbiology, Environmental Microbiology Key Laboratory of Sichuan Province, Chengdu Institute of Biology, Chinese Academy of Sciences, Chengdu 610041, China; School of Civil Engineering, Architecture and Environment, Xihua University, Chengdu 610039, China
| | - Daping Li
- CAS Key Laboratory of Environmental and Applied Microbiology, Environmental Microbiology Key Laboratory of Sichuan Province, Chengdu Institute of Biology, Chinese Academy of Sciences, Chengdu 610041, China.
| |
Collapse
|
33
|
A Review on the Treatment of Petroleum Refinery Wastewater Using Advanced Oxidation Processes. Catalysts 2021. [DOI: 10.3390/catal11070782] [Citation(s) in RCA: 26] [Impact Index Per Article: 8.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/23/2022] Open
Abstract
The petroleum industry is one of the most rapidly developing industries and is projected to grow faster in the coming years. The recent environmental activities and global requirements for cleaner methods are pushing the petroleum refining industries for the use of green techniques and industrial wastewater treatment. Petroleum industry wastewater contains a broad diversity of contaminants such as petroleum hydrocarbons, oil and grease, phenol, ammonia, sulfides, and other organic composites, etc. All of these compounds within discharged water from the petroleum industry exist in an extremely complicated form, which is unsafe for the environment. Conventional treatment systems treating refinery wastewater have shown major drawbacks including low efficiency, high capital and operating cost, and sensitivity to low biodegradability and toxicity. The advanced oxidation process (AOP) method is one of the methods applied for petroleum refinery wastewater treatment. The objective of this work is to review the current application of AOP technologies in the treatment of petroleum industry wastewater. The petroleum wastewater treatment using AOP methods includes Fenton and photo-Fenton, H2O2/UV, photocatalysis, ozonation, and biological processes. This review reports that the treatment efficiencies strongly depend on the chosen AOP type, the physical and chemical properties of target contaminants, and the operating conditions. It is reported that other mechanisms, as well as hydroxyl radical oxidation, might occur throughout the AOP treatment and donate to the decrease in target contaminants. Mainly, the recent advances in the AOP treatment of petroleum wastewater are discussed. Moreover, the review identifies scientific literature on knowledge gaps, and future research ways are provided to assess the effects of these technologies in the treatment of petroleum wastewater.
Collapse
|
34
|
Yamane T, Yoshida N, Sugioka M. Estimation of total energy requirement for sewage treatment by a microbial fuel cell with a one-meter air-cathode assuming Michaelis-Menten COD degradation. RSC Adv 2021; 11:20036-20045. [PMID: 35479885 PMCID: PMC9033653 DOI: 10.1039/d1ra03061b] [Citation(s) in RCA: 10] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/19/2021] [Accepted: 05/30/2021] [Indexed: 12/18/2022] Open
Abstract
Calculations of chemical oxygen demand (COD) degradation in sewage by a microbial fuel cell (MFC) were used to estimate the total energy required for treatment of the sewage. Mono-exponential regression (MER) and the Michaelis-Menten equation (MME) were used to describe the MFC's COD removal rate (CRR). The tubular MFC used in this study (ϕ 5.0 × 100 cm) consisted of an air core surrounding a carbon-based cathode, an anion exchange membrane, and graphite non-woven fabric immersed in sewage. The MFC generated 0.26 A m-2 of the electrode area and 0.32 W m-3 of the sewage water, and 3.9 W h m-3 in a chemostat reactor supplemented continuously with sewage containing 180 mg L-1 of COD with a hydraulic retention time (HRT) of 12 h. The COD removal and coulombic efficiency (CE) were 46% and 19%, respectively, and the energy generation efficiency (EGE) was 0.054 kW h kg-1-COD. The CRR and current in the MFC were strongly dependent on the COD, which could be controlled by varying the HRT. The MER model predicted first-order rate constants of 0.054 and 0.034 for reactors with and without MFC, respectively. The difference in these values indicated that using MFC significantly increased the COD removal. The results of fitting the experimental data to the MME suggested that the total COD can be separated into nondegradable CODs (C n) and degradable CODs (C d) via MFC. The values of CRR for C d and CE suggest that MFC pretreatment for 12 hours prior to aeration results in a 75% decrease in net energy consumption while reducing sewage COD from 180 to 20 mg L-1.
Collapse
Affiliation(s)
- Taiki Yamane
- Department of Civil and Environmental Engineering, Nagoya Institute of Technology (Nitech) Gokiso-Cho, Showa-Ku Nagoya Aichi Japan
| | - Naoko Yoshida
- Department of Civil and Environmental Engineering, Nagoya Institute of Technology (Nitech) Gokiso-Cho, Showa-Ku Nagoya Aichi Japan
| | - Mari Sugioka
- Department of Civil and Environmental Engineering, Nagoya Institute of Technology (Nitech) Gokiso-Cho, Showa-Ku Nagoya Aichi Japan
| |
Collapse
|
35
|
Rahman S, Al-Mamun A, Jafary T, Alhimali H, Baawain MS. Effect of internal and external resistances on desalination in microbial desalination cell. WATER SCIENCE AND TECHNOLOGY : A JOURNAL OF THE INTERNATIONAL ASSOCIATION ON WATER POLLUTION RESEARCH 2021; 83:2389-2403. [PMID: 34032617 DOI: 10.2166/wst.2021.145] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
The green and cost-effective nature of the microbial desalination cell (MDC) make it a promising alternative for future sustainable desalination. However, MDC suffers from a low desalination rate that inhibits it being commercialized. External resistance (Rext) is one of the factors that significantly affect the desalination rate in MDCs, which is still under debate. This research, for the first time, investigated the impact of Rext on MDCs with different internal resistance (Rint) of the system to discover the optimal range of Rext for efficient MDC performance. The results showed that the effect of Rext on desalination rate (2.52 mg/h) was quite low when the Rint of MDC was high (200 Ω). However, operating the MDC with a low Rint (67 Ω) significantly improved the desalination rate (9.85 mg/h) and current generation. When MDC was operated with a low Rint the effect of variable Rext on desalination and current generation was noticeable. Therefore, low Rint (67 Ω) MDC was used to select the optimum Rext when the optimal range was found to be Rext ≪ Rint, Rext < Rint, Rext ≈ Rint (ranging from 1-69 Ω) to achieve the highest desalination rates (10.41-8.59 mg/h). The results showed the superior effect of Rint on desalination rate before selecting the optimal range of Rext in the outer circuit.
Collapse
Affiliation(s)
- Sadik Rahman
- Department of Civil and Architectural Engineering, Sultan Qaboos University, P.O. Box 33, Al-Khoud 123, Muscat, Sultanate of Oman E-mail: ;
| | - Abdullah Al-Mamun
- Department of Civil and Architectural Engineering, Sultan Qaboos University, P.O. Box 33, Al-Khoud 123, Muscat, Sultanate of Oman E-mail: ;
| | - Tahereh Jafary
- Process Engineering Department, International Maritime College, Sohar, Sultanate of Oman
| | - Halima Alhimali
- Department of Civil and Architectural Engineering, Sultan Qaboos University, P.O. Box 33, Al-Khoud 123, Muscat, Sultanate of Oman E-mail: ;
| | | |
Collapse
|
36
|
Liu T, Nadaraja AV, Friesen J, Gill K, Lam MI, Roberts DJ. Narrow pH tolerance found for a microbial fuel cell treating winery wastewater. J Appl Microbiol 2021; 131:2280-2293. [PMID: 33843137 DOI: 10.1111/jam.15102] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/29/2020] [Revised: 03/11/2021] [Accepted: 03/31/2021] [Indexed: 11/30/2022]
Abstract
AIMS The use of microbial fuel cells (MFC) to treat winery wastewater is promising; however, an initial acidic pH, fluctuating chemical oxygen demand (COD) levels and a lack of natural buffering in these wastewaters make providing a suitable buffer system at an ideal buffer to COD ratio. METHODS AND RESULTS A lab scale MFC was designed, inoculated with anaerobic winery sludge and fed with synthetic winery wastewater. It was observed that at pH 6·5, the MFC performed best, the maximum output voltage was 0·63 ± 0·01 V for 60 ± 3 h, and the COD removal efficiency reached 77 ± 7%. The electrogens were affected by pH much more than the bulk COD degrading organisms. Fluorescent in situ hybridization suggested Betaproteobacteria played a significant role in electron transfer. CONCLUSIONS A ratio of 1 mmol l-1 phosphate buffer to 100 mg l-1 COD was ideal to maintain a stable pH for MFCs treating synthetic winery wastewater. SIGNIFICANCE AND IMPACT OF THE STUDY The results find the narrow pH tolerance for MFCs treating winery wastewater and demonstrate the significance of pH and buffer to COD ratio for steady performance of MFCs.
Collapse
Affiliation(s)
- T Liu
- School of Engineering, The University of British Columbia Okanagan, Kelowna, BC, Canada
| | - A V Nadaraja
- School of Engineering, The University of British Columbia Okanagan, Kelowna, BC, Canada
| | - J Friesen
- School of Engineering, The University of British Columbia Okanagan, Kelowna, BC, Canada
| | - K Gill
- School of Engineering, The University of British Columbia Okanagan, Kelowna, BC, Canada
| | - M I Lam
- School of Engineering, The University of British Columbia Okanagan, Kelowna, BC, Canada
| | - D J Roberts
- School of Engineering, The University of British Columbia Okanagan, Kelowna, BC, Canada.,Faculty of Science and Engineering, University of Northern British Columbia, Prince George, BC, Canada
| |
Collapse
|
37
|
Jain S, Mungray AK. Comparative study of different hydro-dynamic flow in microbial fuel cell stacks. Chin J Chem Eng 2021. [DOI: 10.1016/j.cjche.2020.10.016] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
|
38
|
Cheng D, Ngo HH, Guo W, Chang SW, Nguyen DD, Liu Y, Liu Y, Deng L, Chen Z. Evaluation of a continuous flow microbial fuel cell for treating synthetic swine wastewater containing antibiotics. THE SCIENCE OF THE TOTAL ENVIRONMENT 2021; 756:144133. [PMID: 33279188 DOI: 10.1016/j.scitotenv.2020.144133] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/21/2020] [Revised: 11/01/2020] [Accepted: 11/20/2020] [Indexed: 06/12/2023]
Abstract
Microbial fuel cell (MFC) systems are promising technologies for wastewater treatment and renewable energy generation simultaneously. Performance of a double-chamber microbial fuel cell (MFC) to treat synthetic swine wastewater containing sulfonamide antibiotics (SMs) was evaluated in this study. The MFC was operated in continuous modes at different conditions. Results indicated that the current was successfully generated during the operation. The performance of MFC under the sequential anode-cathode operating mode is better than that under the single continuous running mode. Specifically, higher removal efficiency of chemical oxygen demand (>90%) was achieved under the sequential anode-cathode operating mode in comparison with that in the single continuous mode (>80%). Nutrients were also be removed in the MFC's cathode chamber with the maximum removal efficiency of 66.6 ± 1.4% for NH4+-N and 32.1 ± 2.8% for PO43--P. Meanwhile, SMs were partly removed in the sequential anode-cathode operating with the value in a range of 49.4%-59.4% for sulfamethoxazole, 16.8%-19.5% for sulfamethazine and 14.0%-16.3% for sulfadiazine, respectively. SMs' inhibition to remove other pollutants in both electrodes of MFC was observed after SMs exposure, suggesting that SMs exert toxic effects on the microorganisms. A positive correlation was found between the higher NH4+-N concentration used in this study and the removal efficiency of SMs in the cathode chamber. In short, although the continuous flow MFC is feasible for treating swine wastewater containing antibiotics, its removal efficiency of antibiotics requires to be further improved.
Collapse
Affiliation(s)
- Dongle Cheng
- Centre for Technology in Water and Wastewater, School of Civil and Environmental Engineering, University of Technology Sydney, Sydney, NWS 2007, Australia
| | - Huu Hao Ngo
- Centre for Technology in Water and Wastewater, School of Civil and Environmental Engineering, University of Technology Sydney, Sydney, NWS 2007, Australia; NTT Institute of Hi-Technology, Nguyen Tat Thanh University, Ho Chi Minh City, Viet Nam.
| | - Wenshan Guo
- Centre for Technology in Water and Wastewater, School of Civil and Environmental Engineering, University of Technology Sydney, Sydney, NWS 2007, Australia
| | - Soon Woong Chang
- Department of Environmental Energy Engineering, Kyonggi University, 442-760, Republic of Korea
| | - Dinh Duc Nguyen
- Department of Environmental Energy Engineering, Kyonggi University, 442-760, Republic of Korea; Institution of Research and Development, Duy Tan University, Da Nang, Viet Nam
| | - Yiwen Liu
- Centre for Technology in Water and Wastewater, School of Civil and Environmental Engineering, University of Technology Sydney, Sydney, NWS 2007, Australia
| | - Yi Liu
- Department of Environmental Science and Engineering, Fudan University, Shanghai 200438, PR China
| | - Lijuan Deng
- Centre for Technology in Water and Wastewater, School of Civil and Environmental Engineering, University of Technology Sydney, Sydney, NWS 2007, Australia
| | - Zhuo Chen
- Environmental Simulation and Pollution Control State Key Joint Laboratory, State Environmental Protection Key Laboratory of Microorganism Application and Risk Control (SMARC), School of Environment, Tsinghua University, Beijing 100084, PR China
| |
Collapse
|
39
|
Vemuri B, Xia L, Chilkoor G, Jawaharraj K, Sani RK, Amarnath A, Kilduff J, Gadhamshetty V. Anaerobic wastewater treatment and reuse enabled by thermophilic bioprocessing integrated with a bioelectrochemical/ultrafiltration module. BIORESOURCE TECHNOLOGY 2021; 321:124406. [PMID: 33272823 DOI: 10.1016/j.biortech.2020.124406] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/31/2020] [Revised: 11/06/2020] [Accepted: 11/07/2020] [Indexed: 06/12/2023]
Abstract
The current study aimed to develop an anaerobic wastewater treatment and reuse module enabled by thermophilic bioprocessing, a microbial fuel cell (MFC) and ultrafiltration (UF) treatment. A previously unexplored consortium based on Thermoanaerobacterium thermosaccharolyticum and Arcobacter sp. was used to remove ~73% of chemical oxygen demand (COD) from wastewater under anaerobic conditions (CODi = 200 mg/L). The subsequent MFC and UF treatment removed the COD remnants to meet the secondary treatment standards and reuse criteria. The energy efficiency of polyethersulfone UF membranes was improved by modifying their surfaces with coatings based on self-polymerized dopamine, mixtures of dopamine and poly(2-dimethylamino) ethyl methacrylate methyl, and dopamine analog norepinephrine. The resulting hydrophilic, anti-fouling layers were found to reduce interactions between rejected species and the membrane surface. Finally, this study presents a comparative treatment performance and energy efficiency of the wastewater treatment and reuse modules arranged in six different configurations.
Collapse
Affiliation(s)
- Bhuvan Vemuri
- Civil and Environmental Engineering, South Dakota Mines, Rapid City, SD 57701, USA
| | - Lichao Xia
- Civil and Environmental Engineering, Rensselaer Polytechnic Institute, 110 8th Street, Troy, NY 12180, USA; School of Environmental Science and Engineering, Sun Yat-sen University, Guangzhou, 510006, China
| | - Govinda Chilkoor
- Civil and Environmental Engineering, South Dakota Mines, Rapid City, SD 57701, USA
| | - Kalimuthu Jawaharraj
- Civil and Environmental Engineering, South Dakota Mines, Rapid City, SD 57701, USA; BuG ReMeDEE Consortium, South Dakota Mines, Rapid City, SD 57701, USA
| | - Rajesh Kumar Sani
- BuG ReMeDEE Consortium, South Dakota Mines, Rapid City, SD 57701, USA; Department of Biological and Chemical Engineering, South Dakota Mines, Rapid City, SD 57701, USA
| | - Ammi Amarnath
- Energy Efficiency & Demand Response Program, Electric Power Research Institute, 3420 Hillview Avenue, Palo Alto, CA 94304, USA
| | - James Kilduff
- Civil and Environmental Engineering, Rensselaer Polytechnic Institute, 110 8th Street, Troy, NY 12180, USA
| | - Venkataramana Gadhamshetty
- Civil and Environmental Engineering, South Dakota Mines, Rapid City, SD 57701, USA; BuG ReMeDEE Consortium, South Dakota Mines, Rapid City, SD 57701, USA; 2D-materials for Biofilm Engineering, Science and Technology Center, South Dakota Mines, 501 E. St. Joseph Street, Rapid City, SD 5770, USA.
| |
Collapse
|
40
|
Ni J, Steinberger‐Wilckens R, Wang Q. Simultaneous Domestic Wastewater Treatment and Electricity Generation in Microbial Fuel Cell with Mn(IV) Oxide Addition. ChemistrySelect 2021. [DOI: 10.1002/slct.202004680] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
Affiliation(s)
- Jin Ni
- Department of Environmental Engineering University of Science and Technology Beijing 30 Xueyuan Rd, Haidian District Beijing 100083 China
- School of Chemical Engineering College of Engineering and Physical Sciences University of Birmingham Edgbaston Birmingham B15 2TT United Kingdom
| | - Robert Steinberger‐Wilckens
- School of Chemical Engineering College of Engineering and Physical Sciences University of Birmingham Edgbaston Birmingham B15 2TT United Kingdom
| | - Qunhui Wang
- Department of Environmental Engineering University of Science and Technology Beijing 30 Xueyuan Rd, Haidian District Beijing 100083 China
| |
Collapse
|
41
|
Rossi R, Logan BE. Impact of external resistance acclimation on charge transfer and diffusion resistance in bench-scale microbial fuel cells. BIORESOURCE TECHNOLOGY 2020; 318:123921. [PMID: 32768279 DOI: 10.1016/j.biortech.2020.123921] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/07/2020] [Revised: 07/23/2020] [Accepted: 07/24/2020] [Indexed: 06/11/2023]
Abstract
Reducing the external resistance (Rext) for microbial fuel cell (MFC) acclimation can substantially alter the anode performance in terms of charge transfer (RCT), diffusion (Rd) and total anode resistance (RAn). Electrochemical impedance spectroscopy (EIS) was used to quantify anode impedance at different set potentials. Reducing Rext from 50 Ω to 20 Ω during acclimation reduced RCT by 31% (from 6.12 ± 0.09 mΩ m2 to 4.21 ± 0.03 mΩ m2) and Rd by 18% (from 3.4 ± 0.2 mΩ m2 to 2.8 ± 0.1 mΩ m2) at a set anode potential of -115 mV during EIS. Overall RAn decreased by 27%, to 5.13 ± 0.02 mΩ m2 for acclimation at 20 Ω, enabling the anode to achieve 38% higher current densities of 29 ± 1 A m-2. The results show a clear dependence of acclimation procedures and external resistance on kinetic and diffusion components of anode impedance that can impact overall bioelectrochemical performance.
Collapse
Affiliation(s)
- Ruggero Rossi
- Department of Civil and Environmental Engineering, Penn State University, University Park, PA 16802, USA
| | - Bruce E Logan
- Department of Civil and Environmental Engineering, Penn State University, University Park, PA 16802, USA.
| |
Collapse
|
42
|
Ali J, Wang L, Waseem H, Song B, Djellabi R, Pan G. Turning harmful algal biomass to electricity by microbial fuel cell: A sustainable approach for waste management. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2020; 266:115373. [PMID: 32827985 DOI: 10.1016/j.envpol.2020.115373] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/23/2020] [Revised: 06/22/2020] [Accepted: 08/04/2020] [Indexed: 06/11/2023]
Abstract
Effective utilization of harmful algal biomass from eutrophic lakes is required for sustainable waste management and circular bioeconomy. In this study, Microcystis aeruginosa derived biomass served as an electron donor in the microbial fuel cell (MFC) for waste treatment and electricity generation. Bioelectrochemical performance of MFC fed with microalgae (MFC-Algae) was compared with MFC fed with a commercial substrate (MFC-Acetate). Complete removal of microcystin-LR (MC-LR) and high chemical oxygen demand (COD) removal efficiency (67.5 ± 1%) in MFC-Algae showed that harmful algal biomass could be converted into bioelectricity. Polarization curves revealed that MFC-Algae delivered the maximum power density (83 mW/m2) and current density (672 mA/m2), which was 43% and 45% higher than that of MFC-Acetate respectively. Improved electrochemical performance and substantial coulombic efficiency (7.6%) also verified the potential use of harmful algal biomass as an alternate MFC substrate. Diverse microbial community profiles showed the substrate-dependent electrogenic activities in each MFC. Biodegradation pathway of MC-LR by anodic microbes was also explored in detail. Briefly, a sustainable approach for on-site waste management of harmful algal biomass was presented, which was deprived of transportation and special pretreatments. It is anticipated that current findings will help to pave the way for practical applications of MFC technology.
Collapse
Affiliation(s)
- Jafar Ali
- Research Center for Eco-environmental Sciences, Chinese Academy of Sciences, 18 Shuangqing Road, Beijing, 100085, PR China; University of Chinese Academy of Sciences, Beijing, 100049, PR China; Fujian Provincial Key Laboratory of Soil Environmental Health and Regulation, College of Resources and Environment, Fujian Agriculture and Forestry University, Fuzhou, 350002, China; Department of Biotechnology, University of Sialkot, Punjab, 51310, Pakistan
| | - Lei Wang
- Research Center for Eco-environmental Sciences, Chinese Academy of Sciences, 18 Shuangqing Road, Beijing, 100085, PR China
| | - Hassan Waseem
- Department of Biotechnology, University of Sialkot, Punjab, 51310, Pakistan
| | - Bo Song
- Research Center for Eco-environmental Sciences, Chinese Academy of Sciences, 18 Shuangqing Road, Beijing, 100085, PR China; University of Chinese Academy of Sciences, Beijing, 100049, PR China
| | - Ridha Djellabi
- Key Laboratory of Drinking Water Science and Technology, Research Center for Eco- Environmental Sciences, Chinese Academy of Sciences, Beijing, 100085, PR China
| | - Gang Pan
- Research Center for Eco-environmental Sciences, Chinese Academy of Sciences, 18 Shuangqing Road, Beijing, 100085, PR China; Centre of Integrated Water-Energy-Food Studies, School of Animal, Rural and Environmental Sciences, Nottingham Trent University, Brackenhurst Campus, Southwell NG25 0QF, United Kingdom.
| |
Collapse
|
43
|
Varjani S, Joshi R, Srivastava VK, Ngo HH, Guo W. Treatment of wastewater from petroleum industry: current practices and perspectives. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2020; 27:27172-27180. [PMID: 30868465 DOI: 10.1007/s11356-019-04725-x] [Citation(s) in RCA: 39] [Impact Index Per Article: 9.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/13/2019] [Accepted: 02/26/2019] [Indexed: 06/09/2023]
Abstract
Petroleum industry is one of the fastest growing industries, and it significantly contributes to economic growth in developing countries like India. The wastewater from a petroleum industry consist a wide variety of pollutants like petroleum hydrocarbons, mercaptans, oil and grease, phenol, ammonia, sulfide, and other organic compounds. All these compounds are present as very complex form in discharged water of petroleum industry, which are harmful for environment directly or indirectly. Some of the techniques used to treat oily waste/wastewater are membrane technology, photocatalytic degradation, advanced oxidation process, electrochemical catalysis, etc. In this review paper, we aim to discuss past and present scenario of using various treatment technologies for treatment of petroleum industry waste/wastewater. The treatment of petroleum industry wastewater involves physical, chemical, and biological processes. This review also provides scientific literature on knowledge gaps and future research directions to evaluate the effect(s) of various treatment technologies available.
Collapse
Affiliation(s)
- Sunita Varjani
- Gujarat Pollution Control Board, Gandhinagar, Gujarat, 382010, India.
| | - Rutu Joshi
- School of Biological Sciences and Biotechnology, Indian Institute of Advanced Research, Gandhinagar, Gujarat, 382007, India
| | - Vijay Kumar Srivastava
- Sankalchand Patel Vidyadham, Sankalchand Patel University, Visnagar, Gujarat, 384315, India
| | - Huu Hao Ngo
- Centre for Technology in Water and Wastewater, School of Civil and Environmental Engineering, University of Technology Sydney, Sydney, NSW, 2007, Australia
| | - Wenshan Guo
- Centre for Technology in Water and Wastewater, School of Civil and Environmental Engineering, University of Technology Sydney, Sydney, NSW, 2007, Australia
| |
Collapse
|
44
|
Influence of Humidity on Performance of Single Chamber Air-Cathode Microbial Fuel Cells with Different Separators. Processes (Basel) 2020. [DOI: 10.3390/pr8070861] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022] Open
Abstract
The maximum performance of microbial fuel cells (MFCs) is significantly affected by the reduction reactions in the cathode, but their optimum condition is not fully understood yet. The air-cathode MFC operations with different separators (Nafion 117 and polypropylene (PP80) were evaluated at various relative humidity (RH) at the cathode chamber. Air cathode MFCs with a Nafion 117 separator at RH of 90 ± 2% produced the highest cell voltage of 0.35 V (600 Ω) and power density of 116 mW/m2. With a PP80 separator, the maximum power generation of 381 mW/m2 was obtained at a relatively lower RH of 30 ± 2%. The cyclic voltammogram and Tafel analysis indicated that the best performance of cathodic oxygen reduction reactions could be observed at 90% RH for Nafion and 50% RH for the PP80 separator. Additionally, the RH conditions also affected the anodic reactions and oxygen mass transfer rates to the anode chamber through the cathode and separators. This study suggests that the optimum RH condition at the cathode is important in order to obtain a high performance of MFC operations and needs to be controlled at different optimum levels depending on the characteristics of the separators.
Collapse
|
45
|
Guo Y, Wang J, Shinde S, Wang X, Li Y, Dai Y, Ren J, Zhang P, Liu X. Simultaneous wastewater treatment and energy harvesting in microbial fuel cells: an update on the biocatalysts. RSC Adv 2020; 10:25874-25887. [PMID: 35518611 PMCID: PMC9055303 DOI: 10.1039/d0ra05234e] [Citation(s) in RCA: 31] [Impact Index Per Article: 7.8] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/14/2020] [Accepted: 07/03/2020] [Indexed: 01/17/2023] Open
Abstract
The development of microbial fuel cell (MFC) makes it possible to generate clean electricity as well as remove pollutants from wastewater. Extensive studies on MFC have focused on structural design and performance optimization, and tremendous advances have been made in these fields. However, there is still a lack of systematic analysis on biocatalysts used in MFCs, especially when it comes to pollutant removal and simultaneous energy recovery. In this review, we aim to provide an update on MFC-based wastewater treatment and energy harvesting research, and analyze various biocatalysts used in MFCs and their underlying mechanisms in pollutant removal as well as energy recovery from wastewater. Lastly, we highlight key future research areas that will further our understanding in improving MFC performance for simultaneous wastewater treatment and sustainable energy harvesting.
Collapse
Affiliation(s)
- Yajing Guo
- Tianjin Key Lab. of Indoor Air Environmental Quality Control, School of Environmental Science and Engineering, Tianjin University Tianjin 300354 PR China
| | - Jiao Wang
- Tianjin Key Lab. of Indoor Air Environmental Quality Control, School of Environmental Science and Engineering, Tianjin University Tianjin 300354 PR China
| | - Shrameeta Shinde
- Department of Microbiology, Miami University Oxford OH 45056 USA
| | - Xin Wang
- Department of Microbiology, Miami University Oxford OH 45056 USA
| | - Yang Li
- Tianjin Key Lab. of Indoor Air Environmental Quality Control, School of Environmental Science and Engineering, Tianjin University Tianjin 300354 PR China
| | - Yexin Dai
- Tianjin Key Lab. of Indoor Air Environmental Quality Control, School of Environmental Science and Engineering, Tianjin University Tianjin 300354 PR China
| | - Jun Ren
- Tianjin Key Lab. of Indoor Air Environmental Quality Control, School of Environmental Science and Engineering, Tianjin University Tianjin 300354 PR China
| | - Pingping Zhang
- College of Food Science and Engineering, Tianjin Agricultural University Tianjin 300384 PR China
| | - Xianhua Liu
- Tianjin Key Lab. of Indoor Air Environmental Quality Control, School of Environmental Science and Engineering, Tianjin University Tianjin 300354 PR China
| |
Collapse
|
46
|
Wu Y, Cai Y, Lu YX, Zhang LM, Yang XL, Song HL, Yang YL. Bioelectrochemically-assisted nitrogen removal in osmotic membrane bioreactor. WATER SCIENCE AND TECHNOLOGY : A JOURNAL OF THE INTERNATIONAL ASSOCIATION ON WATER POLLUTION RESEARCH 2020; 82:330-338. [PMID: 32941174 DOI: 10.2166/wst.2020.184] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
Nitrogen removal in osmosis membrane bioreactor (OMBR) is important to its applications but remains a challenge. In this study, a bioelectrochemically-assisted (BEA) operation was integrated into the feed side of OMBRs to enhance nitrogen removal, and sodium acetate was served as a draw solute and supplementary carbon source for the growth of denitrifying bacteria due to reversed-solute. The effects of operation mode and influent ammonium (NH4 +) concentration were systematically examined. Compared to a conventional OMBR, the integrated BEA-OMBR achieved higher total nitrogen removal efficiency of 98.13%, and chemical oxygen demand removal efficiency of 95.83% with the influent NH4 +-N concentration of 39 mg L-1. The sequencing analyses revealed that ammonia-oxidizing bacteria (0-0.04%), nitrite-oxidizing bacteria (0-0.16%), and denitrifying bacteria (1.98-8.65%) were in abundance of the microbial community in the feed/anode side of integrated BEA-OMBR, and thus BEA operation increased the diversity of the microbial community in OMBR. Future research will focus on improving nitrogen removal from a high ammonium strength wastewater by looping anolyte effluent to the cathode. These findings have demonstrated that BEA operation can be an effective approach to improve nitrogen removal in OMBRs toward sustainable wastewater treatment.
Collapse
Affiliation(s)
- You Wu
- School of Environment, Nanjing Normal University, Jiangsu Engineering Lab of Water and Soil Eco-remediation, Wenyuan Road 1, Nanjing 210023, China E-mail:
| | - Yun Cai
- School of Environment, Nanjing Normal University, Jiangsu Engineering Lab of Water and Soil Eco-remediation, Wenyuan Road 1, Nanjing 210023, China E-mail:
| | - Yu-Xiang Lu
- School of Environment, Nanjing Normal University, Jiangsu Engineering Lab of Water and Soil Eco-remediation, Wenyuan Road 1, Nanjing 210023, China E-mail:
| | - Li-Min Zhang
- School of Environment, Nanjing Normal University, Jiangsu Engineering Lab of Water and Soil Eco-remediation, Wenyuan Road 1, Nanjing 210023, China E-mail: ; Green Economy Development Institute, Nanjing University of Finance and Economics, Nanjing 210023, China
| | - Xiao-Li Yang
- School of Civil Engineering, Southeast University, Nanjing 210096, China
| | - Hai-Liang Song
- School of Environment, Nanjing Normal University, Jiangsu Engineering Lab of Water and Soil Eco-remediation, Wenyuan Road 1, Nanjing 210023, China E-mail:
| | - Yu-Li Yang
- School of Environment, Nanjing Normal University, Jiangsu Engineering Lab of Water and Soil Eco-remediation, Wenyuan Road 1, Nanjing 210023, China E-mail:
| |
Collapse
|
47
|
Mu C, Wang L, Wang L. Performance of lab-scale microbial fuel cell coupled with unplanted constructed wetland for hexavalent chromium removal and electricity production. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2020; 27:25140-25148. [PMID: 32347498 DOI: 10.1007/s11356-020-08982-z] [Citation(s) in RCA: 20] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/12/2020] [Accepted: 04/22/2020] [Indexed: 06/11/2023]
Abstract
The microbial fuel cell coupled constructed wetland (CW-MFC) was used for treatment sewage and simultaneously generating electricity. The main aim of this study was to explore the optimal conditions for the treatment of hexavalent chromium (Cr (VI)) wastewater by the CW-MFC system. The performance of CW-MFC in removing Cr (VI) and chemical oxygen demands (COD) contained in wastewater and its electricity generation were studied. Electrode spacing, Cr (VI) and COD concentration, and hydraulic retention time (HRT) had certain effects on the performance of CW-MFC. For the electrode spacing of 10 cm, the highest power density of 458.2 mW/m3 could be obtained with the influent concentration of Cr (VI) (60 mg/L) and COD (500 mg/L). The highest Cr (VI) and COD removal rate were obtained with the HRT of 3 days. Compared with CW system, the electrical energy generated in CW-MFC was beneficial to improving the removal efficiency of COD and Cr (VI). Thus, the results confirmed that CW-MFC is a promising technology to remove Cr (VI) from wastewater and achieve bioelectricity production simultaneously.
Collapse
Affiliation(s)
- Chunxia Mu
- College of Environmental Science and Engineering, Ocean University of China, Qingdao, 266100, China
| | - Lin Wang
- College of Environmental Science and Engineering, Ocean University of China, Qingdao, 266100, China.
| | - Li Wang
- School of Energy Science and Engineering, Harbin Institute of Technology, Harbin, 150001, China
| |
Collapse
|
48
|
Cao M, Feng Y, Wang N, Li Y, Li N, Liu J, He W. Electrochemical regulation on the metabolism of anode biofilms under persistent exogenous bacteria interference. Electrochim Acta 2020. [DOI: 10.1016/j.electacta.2020.135922] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/23/2022]
|
49
|
Ang WL, Mohammad AW, Johnson D, Hilal N. Unlocking the application potential of forward osmosis through integrated/hybrid process. THE SCIENCE OF THE TOTAL ENVIRONMENT 2020; 706:136047. [PMID: 31864996 DOI: 10.1016/j.scitotenv.2019.136047] [Citation(s) in RCA: 19] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/24/2019] [Revised: 12/02/2019] [Accepted: 12/08/2019] [Indexed: 06/10/2023]
Abstract
Study of forward osmosis (FO) has been increasing steadily over recent years with applications mainly focusing on desalination and wastewater treatment processes. The working mechanism of FO lies in the natural movement of water between two streams with different osmotic pressure, which makes it useful in concentrating or diluting solutions. FO has rarely been operated as a stand-alone process. Instead, FO processes often appear in a hybrid or integrated form where FO is combined with other treatment technologies to achieve better overall process performance and cost savings. This article aims to provide a comprehensive review on the need for hybridization/integration for FO membrane processes, with emphasis given to process enhancement, draw solution regeneration, and pretreatment for FO fouling mitigation. In general, integrated/hybrid FO processes can reduce the membrane fouling propensity; prepare the solution suitable for subsequent value-added uses and production of renewable energy; lower the costs associated with energy consumption; enhance the quality of treated water; and enable the continuous operation of FO through the regeneration of draw solution. The future potential of FO lies in the success of how it can be hybridized or integrated with other technologies to minimize its own shortcomings, while enhancing the overall performance.
Collapse
Affiliation(s)
- Wei Lun Ang
- Centre for Sustainable Process Technology (CESPRO), Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia; Chemical Engineering Programme, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia.
| | - Abdul Wahab Mohammad
- Centre for Sustainable Process Technology (CESPRO), Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia; Chemical Engineering Programme, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia
| | - Daniel Johnson
- Centre for Water Advanced Technologies and Environmental Research (CWATER), College of Engineering, Swansea University, Swansea SA1 8EN, UK
| | - Nidal Hilal
- Centre for Water Advanced Technologies and Environmental Research (CWATER), College of Engineering, Swansea University, Swansea SA1 8EN, UK; NYUAD Water Research Center, New York University Abu Dhabi, Abu Dhabi, United Arab Emirates
| |
Collapse
|
50
|
Investigation and Improvement of Scalable Oxygen Reducing Cathodes for Microbial Fuel Cells by Spray Coating. Processes (Basel) 2019. [DOI: 10.3390/pr8010011] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/21/2022] Open
Abstract
This contribution describes the effect of the quality of the catalyst coating of cathodes for wastewater treatment by microbial fuel cells (MFC). The increase in coating quality led to a strong increase in MFC performance in terms of peak power density and long-term stability. This more uniform coating was realized by an airbrush coating method for applying a self-developed polymeric solution containing different catalysts (MnO2, MoS2, Co3O4). In addition to the possible automation of the presented coating, this method did not require a calcination step. A cathode coated with catalysts, for instance, MnO2/MoS2 (weight ratio 2:1), by airbrush method reached a peak and long-term power density of 320 and 200–240 mW/m2, respectively, in a two-chamber MFC. The long-term performance was approximately three times higher than a cathode with the same catalyst system but coated with the former paintbrush method on a smaller cathode surface area. This extraordinary increase in MFC performance confirmed the high impact of catalyst coating quality, which could be stronger than variations in catalyst concentration and composition, as well as in cathode surface area.
Collapse
|