Enhancing the power generation in microbial fuel cells with effective utilization of goethite recovered from mining mud as anodic catalyst

Simultaneous removal of chlorobenzene and Cr(VI) from groundwater using microbial fuel cell with low-cost Si modified ferrihydrite electrodes

Aromatic chlorinated compounds and Cr(VI) in groundwater pose significant challenges due to their resistance. This study explores microbial fuel cells using low-cost Si-modified ferrihydrite (SiFh) electrodes for simultaneous chlorobenzene and Cr(VI) removal. The voltage output of MFC assembled with SiFh modified electrode was approximately 1.63 times higher than the bare electrode, achieving 1.23 times higher in chlorobenzene degradation efficiency. CF-SiFh loaded MFC had the highest power generation and best EET efficiency, which was positive to greatest and fastest chlorobenzene removal. Microbial community analysis identified the dominance of Cupriavidus and Pandoraea in chlorobenzene oxidation, while Lentimicrobiaceae and Rhodobacteraceae were key genera that may facilitate direct and indirect electron transfer within the biofilms. Cr species analysis in solution and solids confirmed it was reduced to Cr(OH)3 or CrxFe1-x(OH)3 coprecipitates at cathode. MFCs with SiFh-modified electrodes thus offer a promising technology for simultaneous chlorinated compound and Cr(VI) removal, promising in contaminated groundwater remediation.

Promotion of direct electron transfer between Shewanella putrefaciens CN32 and carbon fiber electrodes via in situ growth of α-Fe2O3 nanoarray

The iron transport system plays a crucial role in the extracellular electron transfer process of Shewanella sp. In this study, we fabricated a vertically oriented α-Fe2O3 nanoarray on carbon cloth to enhance interfacial electron transfer in Shewanella putrefaciens CN32 microbial fuel cells. The incorporation of the α-Fe2O3 nanoarray not only resulted in a slight increase in flavin content but also significantly enhanced biofilm loading, leading to an eight-fold higher maximum power density compared to plain carbon cloth. Through expression level analyses of electron transfer-related genes in the outer membrane and core genes in the iron transport system, we propose that the α-Fe2O3 nanoarray can serve as an electron mediator, facilitating direct electron transfer between the bacteria and electrodes. This finding provides important insights into the potential application of iron-containing oxide electrodes in the design of microbial fuel cells and other bioelectrochemical systems, highlighting the role of α-Fe2O3 in promoting direct electron transfer.

Scalable architecture of low-cost household microbial fuel cell for domestic wastewater treatment and simultaneous energy recovery

Researchers are still trying to achieve desirable results while treating actual wastewater at the field size when scaling up a microbial fuel cell (MFC). This pilot-scale project aimed to create a decentralised system for treating domestic wastewater and concurrent energy generation that may be used as a model for the decentralisation process. In this investigation, a cylindrical-shaped earthen membrane was utilized. The arrangement was deployed on-site at a residence for the treatment of domestic wastewater as well as simultaneous generation of power. From August until November 2021, the 36 L pilot-scale setup was operational for a period of 92 days. The setup's performance was affected by seasonal temperature variations during the operation period. The system's performance was measured in terms of COD, nitrate, and NH₃-N removal, with the highest results being 93.52 %, 84.93 %, and 74.78 %, respectively. The pilot-scale setup achieved the highest current of 43.7 mA, and the output voltage of the setup was boosted to 4.1 V using a power management system. The sustainable operation of pilot household MFC showed a positive indication for field application with a low-cost solution.

MoS2 nanosheets embedded in α-FeOOH as an efficient cathode for enhanced MFC-electro-Fenton performance in wastewater treatment

Microbial fuel cell-electro-Fenton system (MEF) has attracted attention due to refractory organic pollutants removal, where H₂O₂ is in-situ produced without external energy supply. Enhancement of H₂O₂ production and the activation of H₂O₂ to ·OH are the keys to improve degradation performance. Development of bifunctional catalytic cathode is a viable strategy. Herein, the α-FeOOH/MoS₂ nanocomposites was fabricated by a novel facile hydrothermal method based on molybdenite-exfoliated MoS₂ nanosheets suspension, which was used as modified cathode in a MEF system. The obtained α-FeOOH/1 wt%MoS₂ cathode exhibited highest power density of 292.38 mW/m², which was about 3.7 and 1.7 times higher than that of graphite plate and α-FeOOH, respectively. Doping of MoS₂ nanosheets significantly enhanced electrocatalytic activity of the cathode and promoted in-situ H₂O₂ generation. Meanwhile, the exposed reductive Mo⁴⁺ on the surface of MoS₂ could greatly facilitate the conversion cycle of Fe(III)/Fe(II), leading to the efficient activation of H₂O₂ into ·OH. The MEF with α-FeOOH/1 wt%MoS₂ cathode exhibited excellent degradation and mineralization performance for MB, rhodamine B and tetracycline hydrochloride at optimized reaction condition. Furthermore, the MEF can simultaneously achieve MB oxidation and Cr(VI) reduction, and the corresponding removal ratio can reach up to 91.45% and 100%, respectively. Based on simple preparation method as well as recyclability and excellent catalytic property, the α-FeOOH/MoS₂ composite catalyst is considered as a promising MEF cathode for efficient wastewater treatment.

Integrating Human Waste with Microbial Fuel Cells to Elevate the Production of Bioelectricity

Due to the continuous depletion of natural resources currently used for electricity generation, it is imperative to develop alternative energy sources. Human waste is nowadays being explored as an efficient source to produce bio-energy. Human waste is renewable and can be used as a source for an uninterrupted energy supply in bioelectricity or biofuel. Annually, human waste such as urine is produced in trillions of liters globally. Hence, utilizing the waste to produce bioenergy is bio-economically suitable and ecologically balanced. Microbial fuel cells (MFCs) play a crucial role in providing an effective mode of bioelectricity production by implementing the role of transducers. MFCs convert organic matter into energy using bio-electro-oxidation of material to produce electricity. Over the years, MFCs have been explored prominently in various fields to find a backup for providing bioenergy and biofuel. MFCs involve the role of exoelectrogens which work as transducers to convert the material into electricity by catalyzing redox reactions. This review paper demonstrates how human waste is useful for producing electricity and how this innovation would be beneficial in the long term, considering the current scenario of increasing demand for the supply of products and shortages of natural resources used to produce biofuel and bioelectricity.

Enhancement in Cathodic Redox Reactions of Single-Chambered Microbial Fuel Cells with Castor Oil-Emitted Powder as Cathode Material

Microbial fuel cell (MFC) would be a standalone solution for clean, sustainable energy and rural electrification. It can be used in addition to wastewater treatment for bioelectricity generation. Materials chosen for the membrane and electrodes are of low cost with suitable conducting ions and electrical properties. The prime objective of the present work is to enhance redox reactions by using novel and low-cost cathode catalysts synthesized from waste castor oil. Synthesized graphene has been used as an anode, castor oil-emitted carbon powder serves as a cathode, and clay material acts as a membrane. Three single-chambered MFC modules developed were used in the current study, and continuous readings were recorded. The maximum voltage achieved was 0.36 V for a 100 mL mixture of domestic wastewater and cow dung for an anodic chamber of 200 mL. The maximum power density obtained was 7280 mW/m². In addition, a performance test was evaluated for another MFC with inoculums slurry, and a maximum voltage of 0.78 V and power density of 34.4093 mW/m² with an anodic chamber of 50 mL was reported. The present study’s findings show that such cathode catalysts can be a suitable option for practical applications of microbial fuel cells.

Modeling and optimization strategies towards performance enhancement of microbial fuel cells

Considering the complexity associated with bioelectrochemical processes, the performance of a microbial fuel cell (MFC) is governed by input operating parameters. For scaled-up applications, a MFC system needs to be modeled from engineering perspectives in terms of optimum operating conditions to get higher performance and energy recovery. Several conceptual numerical models to advanced computational simulation approaches have been developed to represent simple-form of a complex MFC system. Application of mathematical and computation models are explored to establish the relationship between operating input-variables and power output. The present review discusses about the complexity of system, modeling strategies used and reality of such modeling for scaling-up applications of MFCs. Additionally, the selection of an appropriate mathematical model reduces the computational duration and provides better understanding of the system process. It also explores the possibility and progress towards commercialization of MFCs and thus the need of development of model-based optimization and process-control approaches.

Endogenous inorganic carbon buffers accumulation and self-buffering capacity enhancement of air-cathode microbial fuel cells through anolyte recycling

Anolyte acidification is inevitable in the operation of buffer-free microbial fuel cells (MFCs), which restricts the proliferation and metabolism of electroactive bacteria, and results in electric-power deterioration. The anodic metabolic end-products, inorganic carbons (IC), which are composed of H₂CO₃ (dissolved CO₂), HCO₃^-, and CO₃^2-, are ideal endogenous buffers, whereas the naturally accumulated IC are far from enough to prevent anolyte acidification. In this work, different volume ratios of the anolytes (10%, 30%, and 50%) were recycled to increase the IC concentrations of the single-chamber air-cathode buffer-free MFCs. Under anolyte recycling running mode, IC accumulation agreed with the SGompertz model and the fitting IC-asymptotic concentrations (IC_AC) grew exponentially to 18.5 mM, 24.4 mM, and 32.8 mM as the anolyte recycling ratio increased from 10% to 30% and 50%. Self-buffering running can be realized when the anolyte recycling ratio exceeds 50% for the MFC feeding on 1 g·L^-1 of acetate. The electric power for the 50% recycling scenario increased from the baseline control of 272.4 mW·m^-2 to 628.5 mW·m^-2. The coulombic efficiency (CE) was also apparently improved. This paper for the first time clarifies the accumulation law of endogenous IC buffers under anolyte partially recycling mode and their self-buffering effects.

Suppressing methanogens and enriching electrogens in bioelectrochemical systems

Suppression of methanogens is considered as one of the main challenges in achieving the practical application of several types of bioelectrochemical system (BES). Feasibility of mixed culture as an inoculum in BES is mainly restricted by methanogenic population. Methanogens compete with electrogens (in bioanodes) or acetogens (in biocathodes) for substrate which results in diminishing Coulombic efficiency. Selection of particular inoculum pretreatment method affects the microbial diversity in anodic/cathodic microenvironments and hence the performance of BES. This review discusses various physical, chemical and biological pretreatment methods for suppressing the growth of methanogens. Selective microbial enrichment in anodic/cathodic biofilm can be promoted with bioaugmentation and/or applied external potential approach to harvest maximum Coulombs from the substrate. For field application of BES, physical pretreatment methods can be proposed with intermittent addition of chemical inhibitors and conversion of methane to electricity in order to make the process inexpensive along with recovering the maximum energy.

Engineering of Microbial Electrodes

This chapter provides an overview of the current state-of-the-art in the engineering of microbial electrodes for application in microbial electrosynthesis. First, important functional aspects and requirements of basic materials for microbial electrodes are introduced, including the meaningful benchmarking of electrode performance, a comparison of electrode materials, and methods to improve microbe-electrode interaction. Suitable current collectors and composite materials that combine different functionalities are also discussed. Subsequently, the chapter focuses on the design of macroscopic electrode structures. Aspects such as mass transfer and electrode topology are touched upon, and a comparison of the performance of microbial electrodes relevant for practical application is provided. The chapter closes with an overall conclusion and outlook, highlighting the future prospects and challenges for the engineering of microbial electrodes toward practical application in the field of microbial electrosynthesis. Graphical Abstract.

A review into the use of ceramics in microbial fuel cells

Microbial fuel cells (MFCs) offer great promise as a technology that can produce electricity whilst at the same time treat wastewater. Although significant progress has been made in recent years, the requirement for cheaper materials has prevented the technology from wider, out-of-the-lab, implementation. Recently, researchers have started using ceramics with encouraging results, suggesting that this inexpensive material might be the solution for propelling MFC technology towards real world applications. Studies have demonstrated that ceramics can provide stability, improve power and treatment efficiencies, create a better environment for the electro-active bacteria and contribute towards resource recovery. This review discusses progress to date using ceramics as (i) the structural material, (ii) the medium for ion exchange and (iii) the electrode for MFCs.

Enhancing the tribological performance of PEEK exposed to water-lubrication by filling goethite (α-FeOOH) nanoparticles

Addition of α-FeOOH nanoparticles into PEEK matrix promotes the formation of a lubricating tribo-film on the sliding counterface exposed to water-lubrication and thereby, the tribological performance is greatly improved.