Anaerobic ammonium-oxidizing bacteria gain antibiotic resistance during long-term acclimatization

A review of microplastics on anammox: Influences and mechanisms

Microplastics (MPs) are prevalent in diverse environmental settings, posing a threat to plants and animals in the water and soil and even human health, and eventually converged in wastewater treatment plants (WWTPs), threatening the stable operation of anaerobic ammonium oxidation (anammox). Consequently, a comprehensive summary of their impacts on anammox and the underlying mechanisms must be provided. This article reviews the sources and removal efficiency of MPs in WWTPs, as well as the influencing factors and mechanisms on anammox systems. Numerous studies have demonstrated that MPs in the environment can enter WWTPs via domestic wastewater, rainwater, and industrial wastewater discharges. More than 90% of these MPs are found to accumulate in the sludge following their passage through the treatment units of the WWTPs, affecting the characteristics of the sludge and the efficiency of the microorganisms treating the wastewater. The key parameters of MPs, encompassing concentration, particle size, and type, exert a notable influence on the nitrogen removal efficiency, physicochemical characteristics of sludge, and microbial community structure in anammox systems. It is noteworthy that extracellular polymer secretion (EPS) and reactive oxygen stress (ROS) are important impact mechanisms by which MPs exposure affects anammox systems. In addition, the influence of MPs exposure on the microbial community structure of anammox cells represents a crucial mechanism that demands attention. Future research endeavors will delve into additional crucial parameters of MPs, such as shape and aging, to investigate their effects and mechanisms on anammox. Furthermore, the effective mitigation strategies will also be developed. The paper provides a fresh insight to reveal the influences of MPs exposure on the anammox process and its influence mechanisms, and lays the groundwork for further exploration into the influence of MPs on anammox and potential mitigation strategies.

Response mechanism of a highly efficient partial nitritation-anammox (PN/A) process under antibiotic stress: Extracellular polymers, microbial community, and functional genes

The Partial nitritation-Anammox (PN/A) process can be restricted when treating high ammonia nitrogen wastewater containing antibiotics. This study aims to explore the response mechanism of the PN/A process under antibiotic stress. Results showed the PN/A process achieved a nitrogen removal rate higher than 1.01 ± 0.03 kg N/m3/d under long-term sulfamethazine stress. The increase of extracellular polymers from 22.52 to 43.96 mg/g VSS was conducive to resisting antibiotic inhibitory. The increase of Denitratisoma and SM1A02 abundance as well as functional genes nirS and nirK indicated denitrifiers should play an important role in the stability of the PN/A system under sulfamethazine stress. In addition, antibiotic-resistant genes (ARGs) sul1 and intI1 significantly increased by 8.78 and 5.12 times of the initial values to maintain the resistance of PN/A process to sulfamethazine stress. This study uncovers the response mechanism of the PN/A process under antibiotic stress, offering a scientific basis and guidance for further application in the future.

Effects of antibiotics on microbial nitrogen cycling and N2O emissions: A review

Sulfonamides, quinolones, tetracyclines, and macrolides are the most prevalent classes of antibiotics used in both medical treatment and agriculture. The misuse of antibiotics leads to their extensive dissemination in the environment. These antibiotics can modify the structure and functionality of microbial communities, consequently impacting microbial-mediated nitrogen cycling processes including nitrification, denitrification, and anammox. They can change the relative abundance of nirK/norB contributing to the emission of nitrous oxide, a potent greenhouse gas. This review provides a comprehensive examination of the presence of these four antibiotic classes across different environmental matrices and synthesizes current knowledge of their effects on the nitrogen cycle, including the underlying mechanisms. Such an overview is crucial for understanding the ecological impacts of antibiotics and for guiding future research directions. The presence of antibiotics in the environment varies widely, with significant differences in concentration and type across various settings. We conducted a comprehensive review of over 70 research articles that compare various aspects including processes, antibiotics, concentration ranges, microbial sources, experimental methods, and mechanisms of influence. Antibiotics can either inhibit, have no effect, or even stimulate nitrification, denitrification, and anammox, depending on the experimental conditions. The influence of antibiotics on the nitrogen cycle is characterized by dose-dependent responses, primarily inhibiting nitrification, denitrification, and anammox. This is achieved through alterations in microbial community composition and diversity, carbon source utilization, enzyme activities, electron transfer chain function, and the abundance of specific functional enzymes and antibiotic resistance genes. These alterations can lead to diminished removal of reactive nitrogen and heightened nitrous oxide emissions, potentially exacerbating the greenhouse effect and related environmental issues. Future research should consider diverse reaction mechanisms and expand the scope to investigate the combined effects of multiple antibiotics, as well as their interactions with heavy metals and other chemicals or organisms.

A review on the antibiotic florfenicol: Occurrence, environmental fate, effects, and health risks

Florfenicol, as a replacement for chloramphenicol, can tightly bind to the A site of the 23S rRNA in the 50S subunit of the 70S ribosome, thereby inhibiting protein synthesis and bacterial proliferation. Due to the widespread use in aquaculture and veterinary medicine, florfenicol has been detected in the aquatic environment worldwide. Concerns over the effects and health risks of florfenicol on target and non-target organisms have been raised in recent years. Although the ecotoxicity of florfenicol has been widely reported in different species, no attempt has been made to review the current research progress of florfenicol toxicity, hormesis, and its health risks posed to biota. In this study, a comprehensive literature review was conducted to summarize the effects of florfenicol on various organisms including bacteria, algae, invertebrates, fishes, birds, and mammals. The generation of antibiotic resistant bacteria and spread antibiotic resistant genes, closely associated with hormesis, are pressing environmental health issues stemming from overuse or misuse of antibiotics including florfenicol. Exposure to florfenicol at μg/L-mg/L induced hormetic effects in several algal species, and chromoplasts might serve as a target for florfenicol-induced effects; however, the underlying molecular mechanisms are completely lacking. Exposure to high levels (mg/L) of florfenicol modified the xenobiotic metabolism, antioxidant systems, and energy metabolism, resulting in hepatotoxicity, renal toxicity, immunotoxicity, developmental toxicity, reproductive toxicity, obesogenic effects, and hormesis in different animal species. Mitochondria and the associated energy metabolism are suggested to be the primary targets for florfenicol toxicity in animals, albeit further in-depth investigations are warranted for revealing the long-term effects (e.g., whole-life-cycle impacts, multigenerational effects) of florfenicol, especially at environmental levels, and the underlying mechanisms. This will facilitate the evaluation of potential hormetic effects and construction of adverse outcome pathways for environmental risk assessment and regulation of florfenicol.

Existence of antibiotic pollutant in agricultural soil: Exploring the correlation between microbiome and pea yield

Due to sewage irrigation, manure fertilizer application or other agricultural activities, antibiotics have been introduced into farmland as an emerging contaminant, existing with other agrochemicals. However, the potential influences of antibiotics on the efficiency of agrochemicals and crops health are still unclear. In this work, the effect of antibiotics on fertilization efficiency and pea yield was evaluated, and the mechanism was explored in view of soil microbiome. Nitrogen utilization and pea yield were decreased by antibiotics. In specific, the weight of seeds decreased 9.5 % by 5 mg/kg antibiotics and decreased 25.1 % by 50 mg/kg antibiotics. For N nutrient in pea, antibiotics resulted in 62.5 %-63.7 % decrease in amino acid content and 8.3 %-35.3 % decrease in inorganic-N content. Further research showed that antibiotics interfered with N cycle in soil, inhibiting urea decomposition and denitrification process by reducing function genes ureC, nirK and norB in soil, thus decreasing N availability. Meanwhile, antibiotics destroyed the enzyme function in N assimilation. This work evaluated the environmental risk of antibiotics from fertilization efficiency and N utilization in crop. Antibiotics could not only affect N cycle, limiting the decomposition of N fertilizer, but also affect N utilization in plants, thus affecting the yield and even the quality of leguminous crops.

Effects of antimicrobials in anammox mediated systems: critical review

Anammox-mediated systems are thought to be cost-effective and efficient technologies for removing nitrogen from wastewater by converting nitrite and ammonium into dinitrogen gas. However, there are inhibitory substances that reduce the effectiveness and efficiency of these processes, preventing their widespread application. Antimicrobial agents are among these substances that have been observed to inhibit anammox-mediated processes. Therefore, this review provides a comprehensive overview of the effects of various antimicrobials on the anammox-based systems with emphasis on the effects in different reactor configurations, sludge types and microbial population of anammox-based systems. In addition, this review also discusses the mechanisms by which nitrifying bacteria are inhibited by the antimicrobials. Gaps in knowledge based on this review as well as future research needs have also been suggested. This review gives a better knowledge of antimicrobial effects on anammox-based systems and provides some guidance on the type of system to use to treat antimicrobial-containing wastewater using anammox-based processes.

Acylated homoserine lactones regulate the response of methane metabolism and nitrogen metabolism to florfenicol in anaerobic fermentation

Antimicrobial agents enter the ecological environment through animal excreta and disrupt metabolism in environmental microorganisms. Quorum sensing (QS) can help bacteria adapt to their surroundings. To explore how acyl-homoserine lactone (AHL) can adjust the influence of florfenicol on nitrogen cycling and methane metabolism in anaerobic fermentation, a small indoor thermostatic anaerobic fermentation model was established by adding exogenous acylated homoserine lactone (AHL) signal molecules with florfenicol as the stress factor. Through bacterial function prediction by PICRUST, we found that the addition of AHL further increased the promotion of methanogenesis_by_CO₂_reduction_with_H₂ and hydrogenotrophic methanogenesis by florfenicol. Before the third sampling, florfenicol significantly inhibited the enrichment of the denitrification pathway microbiota, whereas the addition of AHL significantly promoted the enrichment of the denitrification pathway microbiota. Functional annotation showed that florfenicol exposure stress significantly affected nitrogen and methane metabolism, and the addition of AHLs reduced the response of functional genes to florfenicol. All nitrogen cycling enzymes with significantly different abundances in treatment groups were substantially associated with methane-metabolizing enzymes. Glutamate metabolism is significant in the process of anaerobic fermentation, and is a correlation point between nitrogen and methane metabolism. In our experiment, AHL was the influencing factor at the highest latitude that directly regulates the metabolism of NO₃^--N and the degradation process of florfenicol. The addition of AHL curbed the inhibitory effect of florfenicol on some functional microbiota, improved the stability of fermentation microbiota, and weakened the impact of antibiotic residues by improving its degradation efficiency.

Responses of anammox to long-term p-nitrophenol stress: From apparent and microscopic phenomena to mechanism simulation

p-Nitrophenol is usually present in ammonia-rich wastewaters produced by some chemical plants. In this work, the response of anammox process to long-term p-nitrophenol stress was investigated. The changes in the efficiency, sludge characteristics, and microorganisms of the anammox system under different levels of p-nitrophenol stress were examined, and the potential stress mechanisms of p-nitrophenol on anammox were further speculated. The results showed that 10-50 mg/L p-nitrophenol had no obvious impact on nitrogen removal efficiency, but stimulated the secretion of more extracellular polymeric substances. 60 mg/L p-nitrophenol caused the nitrogen removal efficiency to decrease by 64.5% in 5 days. Long-term exposure to p-nitrophenol led to 8.6% reduction in Candidatus_Kuenenia abundance and 18.4%-35.9% decrease in the expression level of anammox bacterial functional genes. Molecular simulation indicated that p-nitrophenol could bind to key enzymes of anammox. This study provides new insights into the treatment of wastewater containing p-nitrophenol or phenol by anammox.

Deciphering antibiotic resistance genes and microbial community of anammox consortia under sulfadiazine and chlortetracycline stress

The responses of anammox consortia to typical antibiotics sulfadiazine (SDZ) and chlortetracycline (CTC) were evaluated on the aspects of general performance, microbial activity, diversity and abundance of antibiotic resistance genes (ARGs), and microbial host of ARGs in anammox system. Results showed the anammox consortia had a stable performance and great resistance to 10 mg/L of SDZ, while 1 mg/L of CTC induced an unrecoverable inhibitory influence on nitrogen removal performance and anammox activity without any special treatment. The absolute abundances of anammox functional genes (nirS, hzsA and hdh) were stimulated by the acclimation to SDZ stress, however, they were much lower than the initial levels under CTC stress. In anammox consortia, ARGs comprised 18 types (94 subtypes) derived from over 20 genera. Strikingly, the anammox bacteria (AnAOB) "Ca. Brocadia" occupied 46.81% of the SDZ resistance genes (sul1 and sul2) and 38.63% of CTC resistance genes (tetX, tetG and rpsJ), and thus were identified as the dominant antibiotic resistance bacteria (ARB). Therefore, harboring the corresponding ARGs by AnAOB could be the primary protective mechanism to interpret the resistance of anammox consortia to antibiotics stress. Meanwhile, co-occurring of ARGs in anammox consortia suggested the synergistic cooperation of different ARGs could be an essential strategy to alleviate the SDZ and CTC stress. The present study proposed a new interpretation of possible mechanism that cause antibiotic resistance of anammox consortia.

How anammox process resists the multi-antibiotic stress: Resistance gene accumulation and microbial community evolution

The effects of multiple antibiotics on the anaerobic ammonia oxidation (anammox) process were investigated. The resistance of the anammox system to high-concentration antibiotics was also demonstrated through gradual acclimation experiments. Inhibition of the anammox process (R₁) occurred when the concentrations of erythromycin (ERY), sulfamethoxazole (SMX) and tetracycline (TC) were 0.1, 5.0 and 0.1 mg L^-1, respectively. The nitrogen removal efficiency (NRE) of R₁ was reduced from 97.2% to 60.7% within 12 days and then recovered to 88.9 ± 9.5% when the nitrogen loading declined from 4.52 ± 0.69 to 2.11 ± 0.58 kg N m^-3 d^-1. Even when the concentrations of ERY, SMX and TC were as high as 1.0, 15.0 and 1.0 mg L^-1, respectively, R₁ maintained stable operation. The increases in the abundance of antibiotic resistance genes (ARGs) and in extracellular polymeric substances (EPS) content showed that the anammox process alleviated stress from multiple antibiotics mainly by producing ARGs and secreting EPS. The molecular docking simulation results illustrated the potential binding sites between ammonium transporter and different antibiotics. The upregulation of functional gene expression and the stable abundance of Candidatus Kuenenia in R₁ compared with that in the control suggested that the R₁ reactor generally maintained more stable long-term operation. This work provides a new understanding of the application of the anammox process to treat wastewater containing multiple antibiotics.

The influence of antibiotics on the anammox process - a review

Anaerobic ammonium oxidation (anammox) is one of the most promising processes for the treatment of ammonium-rich wastewater. It is more effective, cheaper, and more environmentally friendly than the conventional process currently in use for nitrogen removal. Unfortunately, anammox bacteria are sensitive to various substances, including heavy metals and organic matter commonly found in the wastewater treatment plants (WWTPs). Of these deleterious substances, antibiotics are recognized to be important. For decades, the increasing consumption of antibiotics has led to the increased occurrence of antibiotics in the aquatic environment, including wastewater. One of the most important issues related to antibiotic pollution is the generation and transfer of antibiotic resistance bacteria (ARB) and antibiotic resistance genes (ARGs). Here, we will discuss the effect of short- and long-term exposure of the anammox process to antibiotic pollutants; with a special focus on the activity of the anammox bacteria, biomass properties, community structures, the presence of antibiotic resistance genes and combined effect of antibiotics with other substances commonly found in wastewater. Further, the defense mechanisms according to which bacteria adapt against antibiotic stress are speculated upon. This review aims to facilitate a better understanding of the influence of antibiotics and other co-pollutants on the anammox process and to highlight future avenues of research to target gaps in the knowledge.

Nitrogen Removal from Mature Landfill Leachate via Anammox Based Processes: A Review

Mature landfill leachate is a complex and highly polluted effluent with a large amount of ammonia nitrogen, toxic components and low biodegradability. Its COD/N and BOD5/COD ratios are low, which is not suitable for traditional nitrification and denitrification processes. Anaerobic ammonia oxidation (anammox) is an innovative biological denitrification process, relying on anammox bacteria to form stable biofilms or granules. It has been extensively used in nitrogen removal of mature landfill leachate due to its high efficiency, low cost and sludge yield. This paper reviewed recent advances of anammox based processes for mature landfill leachate treatment. The state of the art anammox process for mature landfill leachate is systematically described, mainly including partial nitrification–anammox, partial nitrification–anammox coupled denitrification. At the same time, the microbiological analysis of the process operation was given. Anaerobic ammonium oxidation (anammox) has the merit of saving the carbon source and aeration energy, while its practical application is mainly limited by an unstable influent condition, operational control and seasonal temperature variation. To improve process efficiency, it is suggested to develop some novel denitrification processes coupled with anammox to reduce the inhibition of anammox bacteria by mature landfill leachate, and to find cheap new carbon sources (methane, waste fruits) to improve the biological denitrification efficiency of the anammox system.

Environmental heterogeneity determines the response patterns of microbially mediated N-reduction processes to sulfamethoxazole in river sediments

The widespread occurrence of antibiotics in aquatic ecosystems leads to potential ecological risks to organisms, in turn affecting microbially mediated processes. Here, we investigated the response of dominant N-reduction processes to the frequently detected antibiotic sulfamethoxazole (SMX) along the Chaobai River with regional environmental heterogeneity, including denitrification, anaerobic ammonium oxidation (anammox), dissimilatory nitrate reduction to ammonium (DNRA), and nitrous oxide (N₂O) release. We found two divergent SMX response patterns for denitrification in contrasting scenarios of geochemical properties. In the context of low nitrate and carbon, SMX weakened denitrification with a slightly stimulation first. Whereas SMX directly inhibited denitrification when nitrate and carbon were sufficient. High SMX concentration suppressed anammox (26-72%) and DNRA activities (48-84%) via restraining the activities of anammox and DNRA bacteria. Notably, SMX increased the contribution of denitrification to N-reduction at the expense of DNRA to N-reduction, leading to a shift in nitrogen conversion towards denitrification. Additionally, SMX stimulated N₂O emission (up to 91%) due to superior restraint on process of N₂O reduction to N₂ and an incline for N-reduction towards denitrification, thereby exacerbating greenhouse effect. Our results advance the understanding of how nitrogen cycling is affected by SMX in aquatic ecosystems with environmental heterogeneity.

Combining electrochemical nitrate reduction and anammox for treatment of nitrate-rich wastewater: A short review

Treatment of nitrate-rich wastewater is important but challenging for the conventional biological denitrification process. Here, we propose combining the electrochemical reduction and anaerobic ammonium oxidation (anammox) processes together for treatment of nitrate-rich wastewater. This article reviews the mechanism and current research status of electrochemical reduction of nitrate to ammonium as well as the mechanism and applicability of the anammox process. This article discusses the principles, superiorities and challenges of this combined process. The feasibility of the combined process depends on the efficiency of electrochemical nitrate reduction to ammonium and the conditions in the anammox process to use the reduced ammonium as the substrate to achieve deep nitrogen removal. The article provides a feasible strategy for using the electrochemical reduction and anammox combined process to treat nitrate-rich wastewater.

Response of anammox granules to the simultaneous exposure to macrolide and aminoglycoside antibiotics: Linking performance to mechanism

Antibiotic pollution is becoming increasingly severe due to its extensive use. The potential application of the anaerobic ammonium oxidation (anammox) process in the treatment of wastewater containing antibiotics has attracted much attention. As common antibiotics, spiramycin (SPM) and streptomycin (STM) are widely used to treat human and animal diseases. However, their combined effects on the anammox process remain unknown. Therefore, this study systematically evaluated the response of the anammox process to both antibiotics. The half maximal inhibitory concentrations of SPM and STM were determined. The continuous-flow anammox system could adapt to SPM and STM at low concentrations, while antibiotics at high concentrations exhibited inhibitory effects. When the concentrations reached 5 mg L^-1 SPM and 50 mg L^-1 STM, the nitrogen removal efficiency dramatically decreased and then rapidly recovered within 8 days. Correspondingly, the abundances of dominant bacteria and genes also changed with antibiotic concentrations. In general, the anammox process showed a stable performance and a high resistance to SPM and STM, suggesting that acclimatization by elevating the concentrations was beneficial for the anammox process to obtain resistance to different antibiotics with high concentrations. This study provides guidance for the stable operation of anammox-based biological treatment of antibiotics containing wastewater.

Short- and long-term effects of copper on anammox under gradually increased copper concentrations

This study aims to determine both short- and long-term response of enriched anammox culture to Cu. Assessment of short-term inhibition is based both on total applied Cu concentration and potential bioavailable fractions like intracellular, surface-bound, soluble and free Cu ion. The half maximal inhibitory concentration (IC50) values for total applied, soluble, intracellular and cell-associated concentrations were determined as 4.57 mg/L, 1.97 mg/L, 0.71 mg/L, 1.11 mg/L, respectively. Correlation between the surface-bound fraction of Cu and inhibition response was weak, suggesting that Cu sorbed to biomass was not directly responsible for the effects on anammox activity. There was a disparity between the results of short- and long-term experiments in terms of inhibition threshold concentration (i.e. short-term IC50 = 4.57 mg/L vs long-term IC50 = 6.74 mg/L). Candidatus Kuenenia (59.8%) and Candidatus Brocadia (40.2%) were the two main anammox genera within the initial biomass sample. One of the most interesting finding of the study is the demonstration that a complete wash-out of C. Brocadia genus at an applied Cu concentration of 6.5 mg/L. This strongly indicates that C. Brocadia were not able to tolerate high copper concentrations and all nitrogen conversion was carried out by C. Kuenenia during the Cu exposure period.

Role of Ammonia Oxidation in Organic Micropollutant Transformation during Wastewater Treatment: Insights from Molecular, Cellular, and Community Level Observations

Organic micropollutants (OMPs) are a threat to aquatic environments, and wastewater treatment plants may act as a source or a barrier of OMPs entering the environment. Understanding the fate of OMPs in wastewater treatment processes is needed to establish efficient OMP removal strategies. Enhanced OMP biotransformation has been documented during biological nitrogen removal and has been attributed to the cometabolic activity of ammonia-oxidizing bacteria (AOB) and, specifically, to the ammonia monooxygenase (AMO) enzyme. Yet, the exact mechanisms of OMP biotransformation are often unknown. This critical review aims to fundamentally and quantitatively evaluate the role of ammonia oxidation in OMP biotransformation during wastewater treatment processes. OMPs can be transformed by AOB via direct and indirect enzymatic reactions: AMO directly transforms OMPs primarily via hydroxylation, while biologically produced reactive nitrogen species (hydroxylamine (NH₂OH), nitrite (NO₂^-), and nitric oxide (NO)) can chemically transform OMPs through nitration, hydroxylation, and deamination and can contribute significantly to the observed OMP transformations. OMPs containing alkyl, aliphatic hydroxyl, ether, and sulfide functional groups as well as substituted aromatic rings and aromatic primary amines can be biotransformed by AMO, while OMPs containing alkyl groups, phenols, secondary amines, and aromatic primary amines can undergo abiotic transformations mediated by reactive nitrogen species. Higher OMP biotransformation efficiencies and rates are obtained in AOB-dominant microbial communities, especially in autotrophic reactors performing nitrification or nitritation, than in non-AOB-dominant microbial communities. The biotransformations of OMPs in wastewater treatment systems can often be linked to ammonium (NH₄⁺) removal following two central lines of evidence: (i) Similar transformation products (i.e., hydroxylated, nitrated, and desaminated TPs) are detected in wastewater treatment systems as in AOB pure cultures. (ii) Consistency in OMP biotransformation (r_bio, μmol/g VSS/d) to NH₄⁺ removal (r_NH4+, mol/g VSS/d) rate ratios (r_bio/r_NH4+) is observed for individual OMPs across different systems with similar r_NH4+ and AOB abundances. In this review, we conclude that AOB are the main drivers of OMP biotransformation during wastewater treatment processes. The importance of biologically driven abiotic OMP transformation is quantitatively assessed, and functional groups susceptible to transformations by AMO and reactive nitrogen species are systematically classified. This critical review will improve the prediction of OMP transformation and facilitate the design of efficient OMP removal strategies during wastewater treatment.

Effects of norfloxacin on nitrate reduction and dynamic denitrifying enzymes activities in groundwater

The impact of antibiotics on denitrification has attracted widespread attention recently. Norfloxacin, as a representative of fluoroquinolone antibiotics, is extensively detected in groundwater. However, whether the release of norfloxacin into the groundwater poses potential risks to denitrification remains unclear. In this study, effect of norfloxacin on denitrification was investigated. The results showed that increasing norfloxacin from 0 to 100 μg/L decreased nitrate removal rate from 0.68 to 0.44 mg/L/h, but enhanced N2O emission by 177 folds. Additionally, 100 μg/L of norfloxacin decreased nitrite accumulation by 50.6%. Corresponding inhibition of norfloxacin on bacterial growth, carbon source utilization, electron transport system activity and genes expression was revealed. Furthermore, denitrifying enzyme dynamic monitoring results showed that norfloxacin inhibited nitrate reductase activity, and enhanced nitrite reductase activity to some extent in denitrification process, which was consistent with the variations of nitrate and nitrite. Meanwhile, sensitivity analysis demonstrated that nitrate reductase was more easily affected by norfloxacin than nitrite reductase. Overall, this study suggests that multiple regulation of denitrifying enzyme activity contributes to evaluating the comprehensive effects of antibiotics on groundwater denitrification.

Effect of sulfamethoxazole and oxytetracycline on enhanced biological phosphorus removal and bacterial community structure

The individual and combined effects of sulfamethoxazole (SMX) and oxytetracycline (OTC) on an enhanced biological phosphorus removal (EBPR) system was investigated. OTC at 5 mg/L resulted in filamentous bulking with a collapse of EBPR system. P removal decreased to 44.8% and COD was mostly removed during the aerobic phase. SMX and OTC had antagonistic effects in EBPR system. The inhibitory effect of SMX and SMX + OTC on P removal, COD removal, glycogen transformation and extracellular polymeric substances content was reversible with prolonged operation, accompanied with increase of polyphosphate accumulating organisms. The presence of nitrification inhibitor allylthiourea, high pH and low tetX abundance limited the removal of SMX and OTC. The bacterial community structure, antibiotic resistance genes abundances and genes functions were also investigated by metagenomic analysis. The results of this study offer insights into the individual and combined environmental risks of SMX and OTC, and their impact on EBPR.

Interrelationships between tetracyclines and nitrogen cycling processes mediated by microorganisms: A review

Due to their broad-spectrum antibacterial activity and low cost, tetracyclines (TCs) are a class of antibiotics widely used for human and veterinary medical purposes and as a growth-promoting agent for aquaculture. Interrelationships between TCs and nitrogen cycling have attracted scientific attention due to the complicated processes mediated by microorganisms. TCs negatively impact the nitrogen cycling; however, simultaneous degradation of TCs during nitrogen cycling mediated by microorganisms can be achieved. This review encapsulates the background and distribution of TCs in the environment. Additionally, the main nitrogen cycling process mediated by microorganisms were retrospectively examined. Furthermore, effects of TCs on the nitrogen cycling processes, namely nitrification, denitrification, and anammox, have been summarized. Finally, the pathway and microbial mechanism of degradation of TCs accompanied by nitrogen cycling processes were reviewed, along with the scope for prospective studies.

Exogenous extracellular polymeric substances as protective agents for the preservation of anammox granules

The preservation of anammox granules is of great significance for the rapid start-up of the anammox process and improvement of performance stability. Therefore, it is necessary to explore an economical and stable preservation strategy. Exogenous extracellular polymeric substances (EPS) were used as protective agents for the preservation of anammox granules in this study. In brief, EPS from anammox sludge (A-EPS) and denitrifying sludge (D-EPS) were added to preserve anammox sludge at 4 °C and room temperature (15-20 °C). The results showed that A-EPS addition at 4 °C was the optimal condition for the preservation of anammox granules. After 90 days of preservation, the specific anammox activity (SAA) of the anammox granules remained at 92.7 ± 2.2 mg N g^-1 VSS day^-1 (remaining ratio of 33.4%), while that of the sludge with D-EPS addition at the same temperature was only 77.1 ± 3.2 mg N g^-1 VSS day^-1 (remaining ratio of 27.8%). The nitrogen removal efficiency of the experimental group with D-EPS at room temperature was 85.9%, and that of the A-EPS group reached 90.6% under the same temperature conditions. The abundance of the functional genes hzsA, hdh and nirS of the sludge (4 °C; A-EPS addition) after recovery were 138.5%, 317.1%, and 375.9%, respectively, of those of sludge from the D-EPS-added group at the same temperature. RDA revealed the contribution of proteins to the preservation process. Overall, this study provides an economical and robust strategy for the preservation of anammox granules.

A critical review on the effects of antibiotics on anammox process in wastewater

Anaerobic ammonium oxidation (anammox) has recently become of significant interest due to its capability for cost-effective nitrogen elimination from wastewater. However, anaerobic ammonia-oxidizing bacteria (AnAOB) are sensitive to environmental changes and toxic substances. In particular, the presence of antibiotics in wastewater, which is considered unfavorable to the anammox process, has become a growing concern. Therefore, it is necessary to evaluate the effects of these inhibitors to acquire information on the applicability of the anammox process. Hence, this review summarizes our knowledge of the effects of commonly detected antibiotics in water matrices, including fluoroquinolone, macrolide, β-lactam, chloramphenicol, tetracycline, sulfonamide, glycopeptide, and aminoglycoside, on the anammox process. According to the literature, the presence of antibiotics in wastewater could partially or completely inhibit anammox reactions, in which antibiotics targeting protein synthesis or DNA replication (excluding aminoglycoside) were the most effective against the AnAOB strains.

Deciphering correlation between chromaticity and activity of anammox sludge

The red color is the most striking character of anaerobic ammonium-oxidizing bacteria (AnAOB) which has been used to estimate the anammox activity roughly. However, the quantitative relationship between the color and activity of anammox sludge still remains unknown. In this study, the chromaticity, activity and their correlation were systematically investigated at different steady-state nitrogen loading rates. The chromaticity of anammox sludge was digitalized by the CIE L*a*b* color space. The results revealed that the average chroma value was found to be significantly correlated with specific anammox activity (r = 0.940, p < 0.01) and the cluster centers of chromaticity coordinates (a*, b*) of anammox sludge were established to define the typical working states of anammox system. The visible spectra of anammox sludge were proved to originate from the cytochrome c. The correlation between chroma and heme c concentration of anammox sludge was consistent with the fully-reduced cytochrome c and the chroma was determined by both content and redox ratio of cytochrome c. The chromaticity of anammox sludge was able to be linked with the anammox activity via reduced cytochrome c content. The gene abundance of cytochrome c synthetase linked the chromaticity with AnAOB quantity via total cytochrome c content, while the enzyme activity of octaheme hydrazine dehydrogenase linked the chromaticity with AnAOB activity via reduced cytochrome c ratio. Moreover, the redundancy analysis proved that heme c, as the key component of cytochrome c, was the most important explanatory variable accounting for the maximum 69.6% of the total variation of the anammox community, which correlated positively with the relative abundance of dominant AnAOB (Candidatus Kuenenia). This work aimed at demonstrating the chromaticity of anammox sludge could be developed as an alternative intuitive anammox activity indicator which will promote the monitoring and optimization of anammox process.

Effect and ameliorative mechanisms of polyoxometalates on the denitrification under sulfonamide antibiotics stress

The environmental risks of the sulfonamide antibiotics have attracted much attention recently. In this study, the inhibition effects of sulfadiazine (SDZ) on denitrification electron transfer system (ETS) and ameliorative mechanisms of phosphomolybdic acid (PMo12) were first explored. When denitrification was under 2 mg/L SDZ stress, experiments indicated that PMo12 enhanced NO3--N reduction efficiency and rate from 68.30% to 100.00% and 124.22 to 184.59 N/g VSS/h, respectively. Electron transfer rate and consumption efficiency in denitrification ETS were enhanced to ameliorate SDZ inhibition, which was due to the more secreted riboflavin and cytochrome c and the increased denitrifying enzymes activity with PMo12 mediation. In addition, the microbial growth inhibition and cell membrane damage were ameliorated due to the more EPS surrounding microbe with PMo12 mediation. Higher diversity of denitrifying microbe with PMo12 mediation also promoted denitrification under SDZ stress. This work provided promising strategy to ameliorate antibiotics inhibition in the wastewater bio-treatment.

Application of the Anammox in China-A Review

Anaerobic ammonia oxidation (anammox) has been one of the most innovative discoveries for the treatment of wastewater with high ammonia nitrogen concentrations. The process has significant advantages for energy saving and sludge reduction, also capital costs and greenhouse gases emissions are reduced. Recently, the use of anammox has rapidly become mainstream in China. This study reviews the engineering applications of the anammox process in China, including various anammox-based technologies, selection of anammox reactors and attempts to apply them to different wastewater treatment plants. This review discusses the control and implementation of stable reactor operation and analyzes challenges facing mainstream anammox applications. Finally, a unique and novel perspective on the development and application of anammox in China is presented.

Performance of Anammox Processes for Wastewater Treatment: A Critical Review on Effects of Operational Conditions and Environmental Stresses

The anaerobic ammonium oxidation (anammox) process is well-known as a low-energy consuming and eco-friendly technology for treating nitrogen-rich wastewater. Although the anammox reaction was widely investigated in terms of its application in many wastewater treatment processes, practical anammox application at the pilot and industrial scales is limited because nitrogen removal efficiency and anammox activity are dependent on many operational factors such as temperature, pH, dissolved oxygen concentration, nitrogen loading, and organic matter content. In practical application, anammox bacteria are possibly vulnerable to non-essential compounds such as sulfides, toxic metal elements, alcohols, phenols, and antibiotics that are potential inhibitors owing to the complexity of the wastewater stream. This review systematically summarizes up-to-date studies on the effect of various operational factors on nitrogen removal performance along with reactor type, mode of operation (batch or continuous), and cultured anammox bacterial species. The effect of potential anammox inhibition factors such as high nitrite concentration, high salinity, sulfides, toxic metal elements, and toxic organic compounds is listed with a thorough interpretation of the synergistic and antagonistic toxicity of these inhibitors. Finally, the strategy for optimization of anammox processes for wastewater treatment is suggested, and the importance of future studies on anammox applications is indicated.

Tetracycline-induced effects on the nitrogen transformations in sediments: Roles of adsorption behavior and bacterial activity

Nitrification and denitrification are the most important nitrogen transformation processes in the environment. Recently, due to widespread use, antibiotics have been reported to lead to environmental risks. Tetracycline (TC) is one of the most extensively used antibiotics in many areas. However, its reported effects on nitrogen transformations were conflicting in previous studies. In this study, the effects of TC on nitrogen transformations in sediment were investigated by analyzing TC transport and bacterial activity. It was found that the adsorption of TC onto the sediment was favorable and spontaneous, with adsorption capacity 54.3 mg/kg. The adsorption kinetics of TC onto the sediment and the isotherm fitted the Elvoich and Freundlich models, respectively, indicating that the adsorption was a chemisorption process, including electrostatic interactions and chemical bonding between TC and the sediment. TC showed no effect on nitrification in the sediment, but significantly inhibited the reduction of nitrate and nitrite during denitrification, consistent with observations made for the model denitrifier Paracoccus denitrificans under TC stress. Mechanistic study indicated that TC at 130 μg/g-cell inhibited 50.7% of P. denitrificans growth and 61.6% of cell viability. Meanwhile, the catalytic activities of the key denitrifying enzymes, nitrate reductase (NAR) and nitrite reductase (NIR), decreased to 29.1% and 68.0% of the control levels when the TC concentration was 130 μg/g-cell, suggesting that NAR was more sensitive to the TC than NIR, which contributed to a delay in nitrite accumulation.

Interactions between tetracycline and extracellular polymeric substances in anammox granular sludge

The effects of antibiotics on extracellular polymeric substances (EPS) using tetracycline as the model chemical were analyzed in terms of molecular property and structure. Results showed that three components, tryptophan, tryptophan type-proteins and polysaccharides in EPS of granular sludge from anaerobic ammonium oxidation (anammox) reactor can interacted with tetracycline, detected by the static quenching via the endogenous fluorescence quenching and transient fluorescence spectroscopy. Thermodynamic experiment confirmed that their interaction was dominated by the hydrophobic force. Combined with the synchronous fluorescence spectroscopy, it was found that tetracycline facilitated the extension degree of peptide chains in tryptophan type-proteins, leading to the enhancement of hydrodynamic diameter of the macromolecules in EPS when binding with tetracycline. EPS in AnGS demonstrated the resistance ability to tetracycline by converting from gel to sol state in rheological term. With the increase of tetracycline concentration, the stability of elastic structures in EPS declined, influencing the AnGS stability.

Deciphering the microbial and genetic responses of anammox biogranules to the single and joint stress of zinc and tetracycline

The feasibility of using anaerobic ammonium oxidation (anammox) process to treat wastewaters containing antibiotics and heavy metals was evaluated in this study. The nitrogen removal performance and characteristic parameters were monitored during the whole experimental period of 258 d. The single and joint effects of zinc and tetracycline on the microbial community were studied in upflow anaerobic sludge blanket (UASB) reactors. The anammox performance remained at levels comparable with the initial state at the lower inhibitor concentrations (zinc, 0-2.26 mg L^-1; tetracycline, 0-0.5 mg L^-1). When the concentrations of zinc and tetracycline increased to 3.39 mg L^-1 in R₁ and 1.0 mg L^-1 in R₂, an obvious deterioration in performance was observed. Dual inhibitors with a total concentration of ≥3 mg L^-1 caused dramatic decreases in the nitrogen removal efficiency of R₃. The quantification results showed that the abundances of eight antibiotic resistance genes (ARGs), czcA and intI1 in the experimental reactors generally increased under stress from metals or/and antibiotics, with final values higher than in the control, while the functional gene abundances were lower. Moreover, most genes exhibited significant correlations. Microbial community analysis indicated that Planctomycetes (represented by Candidatus Kuenenia) was inhibited by both zinc and tetracycline, but still held the dominant position. Furthermore, Caldilinea (belonging to Chloroflexi) maintained a higher abundance during the inhibitory period, implying its potential resistance to both inhibitors. These findings suggested that anammox could be inhibited by metals and antibiotics, but it has the potential to remove nitrogen from wastewaters containing both of them within the concentration threshold.

Changes in nitrogen removal and microbiota of anammox biofilm reactors under tetracycline stress at environmentally and industrially relevant concentrations

Anammox-related processes are often applied for the wastewater treatment which contains both ammonium and antibiotics. Herein, the long-term effects of tetracycline (TC), at environmentally and industrially relevant concentrations, on the performance, anammox activity and microbial community of anammox reactors were investigated for 518 days. The control reactor (without TC exposure) was stable for nitrogen removal during the long-term operation (a nitrogen removal rate of 0.56 ± 0.05 kg-N·m^-3·d^-1). In the TC-added reactor, the nitrogen removal efficiency increased slightly at low TC levels (1-100 μg/L), whereas poor anammox performance occurred at high TC concentration (1000 μg/L). Furthermore, the concentrations of extracellular polymeric substances (EPS) were much higher at 10 μg/L than those in the control reactor (P < 0.01), whereas rapidly decreased at 1000 μg-TC/L. Furthermore, the reactor performance was highly consistent with the variations of the heme c contents. Consistently, exposure to TC changed the abundance of anammox bacteria, e.g., an increase in Candidatus Jettenia abundance occurred from 2.20 ± 0.97% (0-10 μg/L) to 12.13 ± 1.66% (100 μg/L). Similarly, the genus Denitratisoma, the most predominant denitrification bacteria, also had a higher abundance at a TC concentration of 100 μg/L (15.60 ± 6.42%) than other TC concentrations (5.40 ± 2.50% and 7.65 ± 0.55% at concentrations of 10 and 1000 μg/L, respectively). The results can explain why the exposure of anammox bacteria to a lower TC concentration (100 μg/L) resulted in a better nitrogen removal rate. In contrast, exposure to a high TC level (1000 μg/L) led to a decline in the abundance of anammox bacteria and denitrifiers (1.53 ± 0.64% and 8.18 ± 0.63%, respectively) but an increased abundance in the nitrifier population (8.07 ± 1.21%; P < 0.01). Therefore, this study can aid in the design and operation of anammox-based processes treating sewage and industrial wastewater.

Response of Anammox biofilm to antibiotics in trace concentration: Microbial activity, diversity and antibiotic resistance genes

Long-term impacts of two antibiotics-norfloxacin (NOR) and erythromycin (ERY) in trace concentration (1ug L^-1) on Anammox biofilm were investigated. The specific Anammox activity (SAA) and dehydrogenase activity (DHA) of Anammox biofilm were detected by batch experiments, the microbial diversity was analyzed using high-throughput sequencing technology and the antibiotic resistance genes (ARGs) were measured by qPCR. Results showed that long-term NOR feeding decreased 30% SAA and 39.6% DHA, and also decreased the abundance of the OTUs related to autotrophic nitrogen removal, while ERY had slight impact on Anammox. Only two ARGs targeted to ERY (ermB, mphA) were detected in the two Anammox systems while those targeted to NOR (qnrA, qnrB, qnrD, and qnrS) were not detected. The relative expression of ermB to 16S rRNA increased from 2.08±0.32×10^-4 to 3.53±1.18×10^-4, and that of mphA increased to 5.00±0.48×10^-4 from 4.48±1.32×10^-5. The induced ARGs in the Anammox system help it resist the ERY shock.

Cell surface characterization and trace metal adsorptive properties of anaerobic ammonium-oxidizing (anammox) consortia

Interactions between metals and anaerobic ammonium oxidizing consortia substantially affect the quality of wastewater treatment plant effluent. In this study, we conducted acid-base titrations to ascertain the surface reactivity and proton adsorptive capacity of anammox consortia. A combination of titration data modeling and infrared spectroscopy suggested the presence of carboxyl, amine, and hydroxyl groups. Cd adsorption experiments demonstrate that 1 g of dry biomass could bind an equivalent of 7.12 × 10^-6 mol/L of Cd. Density functional theory calculations further reveal that carboxyl and hydroxyl groups are able to form stable Cd complexes. Furthermore, considerable carboxyl and hydroxyl groups promote bacterial aggregation, and thus solid-liquid separation. The results of this study highlight the potential role of anammox consortia in adsorbing metal cations, and thus help to improve the understanding of the universally significant contribution of anammox consortia at the detoxification of metal cations in wastewater treatment systems.

Increased salinity improves the thermotolerance of mesophilic anammox consortia

While the application of anammox-based process for mesophilic sidestream treatment is at present the state of the art and mainstream treatment at ambient temperature is also in development, the feasibility of thermophilic anammox process is still unclear. This study investigated the effects of salinity on the thermotolerance of mesophilic anammox sludge. In batch activity tests, 45 °C seems to be the critical temperature for the tolerance of mesophilic anammox consortia without acclimatization or amendments. The optimal anammox activity at 40, 42.5, and 45 °C can be achieved with the amendment of salt at 5-8, 8-10, and ~12 g NaCl L^-1, respectively. However, this improvement effect was limited at 50 °C or when the shock duration was longer than 24 h even at 45 °C. In continuous-flow bioreactors, mesophilic anammox consortia could gradually adapt to 40-50 °C under a transition of 2.5 °C, and the performance was enhanced by an increase in salinity, which may be associated with the increase in extracellular polymeric substances. A nitrogen removal rate of 0.53 kgN m^-3 d^-1 was finally obtained at 50 °C. Overall, these interesting results facilitate further opportunities for thermophilic anammox process.

Approaches and processes for ammonia removal from side-streams of municipal effluent treatment plants

The main objective of this review article is to provide a comprehensive view on various conventional and emerging side-stream ammonia removal treatment options for municipal wastewater treatment plants (WWTPs). Optimization of wastewater treatment facilities from an energy and emissions stand-point necessitates consideration of the impact of the various internal side-streams. Side-streams from anaerobic sludge digesters in particular have the potential to be a significant ammonium load to the mainstream treatment process. However, the literature suggests that managing side-streams through their treatment in the mainstream process is not the most energy efficient approach, nor does it allow for practical recovery of nutrients. Furthermore, as effluent criteria become more stringent in some jurisdictions and sludge hydrolysis pre-treatment for digesters more common, an understanding of treatment options for ammonia in digester supernatant becomes more important. Given these considerations, a variety of side-stream treatment processes described in the literature are reviewed.

Performance of the nitrogen removal, bioactivity and microbial community responded to elevated norfloxacin antibiotic in an Anammox biofilm system

Antibiotic pollution in nitrogen contained wastewater is an urgent issue. In this study, the nitrogen removal, biofilm property and microbial community of Anammox system were investigated with elevated norfloxacin (NOR) feeding. Batch experiments were carried out to detect the specific anammox activity (SAA) in each phase. Anammox system could resist NOR in 0.001-50 mg L^-1, in which the nitrogen removal was firstly limited to 0.220 from the initial 0.345 by NOR suppression and then regained to 0.354 kg m^-3 d^-1 after acclimatization. SAA decreased to 7.56 from the initial 10.84 and then climbed up to 11.01 mg g^-1 SS, while the relative abundance of Candidatus Kuenenia decreased to 11.33% and then picked up to 25.28% from the initial 20.74%. The suppression threshold on Anammox was calculated as 50-100 mg L^-1 NOR, the NRR, SAA and Candidatus Kuenenia abundance all recovered to almost the initial level when NOR feeding was terminated.

Influence of sulfadimethoxine (SDM) and sulfamethazine (SM) on anammox bioreactors: Performance evaluation and bacterial community characterization

The specific inhibitory effects of sulfonamides on anaerobic ammonium oxidation (anammox) process remain unknown. This study investigated the inhibitory characteristics of sulfadimethoxine (SDM) and sulfamethazine (SM) in two anammox bioreactors with NH₄⁺-N (160 mg/L) and NO₂^--N (210 mg/L) in influent. Results indicate that anammox bacteria in both bioreactors adapted to low antibiotic concentrations (less than 3 mg/L). At concentrations between 5 and 7 mg/L, SDM inhibited the growth of anammox bacteria and resulted in a decrease of Candidatus Brocadia abundance from 2.57% to 0.39%. In contrast, at concentrations of 5-9 mg/L, SM inhibited the denitrification process more severely than SDM, resulting in higher accumulation of nitrite and nitrate. The purpose of this study was to elucidate the inhibitory effects of sulfonamides on the anammox process and to provide a reference for the stable operation of anammox bioreactors for the treatment of sulfonamide-containing wastewater.

Inhibitive effects of chlortetracycline on performance of the nitritation-anaerobic ammonium oxidation (anammox) process and strategies for recovery

The short- and long-term effects of chlortetracycline (CTC) on the nitritation- anaerobic ammonium oxidation (anammox) process were evaluated. The half maximal inhibitory concentration of CTC in the batch tests of the nitritation-anammox process was 278.91mg/L at an exposure time of 12hr. The long-term effects of CTC on the process were examined in a continuous-flow nitritation-anammox reactor. Within 14days, the nitrogen removal rate significantly decreased from 0.61 to 0.25kgN/m³/day with 60 mg/L CTC in the influent. The performance suppressed by CTC barely recovered, even after CTC was removed from the influent. Furthermore, the inhibition of CTC also reduced the relative abundance of ammonium oxidizing bacteria (AOB) and anaerobic ammonium oxidizing bacteria (AnAOB) in the reactor, resulting in both a decreased amount of and an imbalance between AOB and AnAOB. When fresh anammox sludge was reseeded into the nitritation-anammox reactor, the nitrogen removal rate recovered to 0.09 ± 0.03 kg N/m³/day.

The occurrence, maintenance, and proliferation of antibiotic resistance genes (ARGs) in the environment: influencing factors, mechanisms, and elimination strategies

Here, we review the possible reasons responsible for the occurrence, maintenance and proliferation of antibiotic resistance genes (ARGs) in the environment, as well as the corresponding mechanisms of their development, diffusion and transfer. Additionally, elimination strategies are also discussed. The factors that influence the development of ARGs are selection pressure, including that from antibiotics, metal and multiple other factors, co-resistance and cross-resistance, microbial consortium structure, nutrients in the environment and oxidative stress responses. Process parameters, transport pathways, and elimination strategies to reduce the health risk caused by ARGs are also reviewed in detail. Moreover, knowledge gaps and future opportunities of ARGs are addressed.

Enhanced effects of maghemite nanoparticles on the flocculent sludge wasted from a high-rate anammox reactor: Performance, microbial community and sludge characteristics

Magnetic nanoparticles (NPs) have been widely applied in environmental remediation, biomass immobilization and wastewater treatment, but their potential impact on anaerobic ammonium oxidation (anammox) biomass remains unknown. In this study, the short-term and long-term impacts of maghemite NPs (MHNPs) on the flocculent sludge wasted from a high-rate anammox reactor were investigated. Batch assays showed that the presence of MHNPs up to 200 mg L^-1 did not affect anammox activity, reactive oxygen species production, or cell membrane integrity. Moreover, long-term addition of 1-200 mg L^-1 MHNPs had no adverse effects on reactor performance. Notably, the specific anammox activity, the abundance of hydrazine synthase structural genes and the content of extracellular polymeric substance were increased with elevated MHNP concentrations. Meanwhile, the community structure was shifted to higher abundance of Candidatus Kuenenia indicated by high-throughput sequencing. Therefore, MHNPs could be applied to enhance anammox flocculent sludge due to their favorable biocompatibility.

Susceptibility, resistance and resilience of anammox biomass to nanoscale copper stress

The increasing use of engineered nanoparticles (NPs) poses an emerging challenge to biological wastewater treatment. The long-term impact of CuNPs on anaerobic ammonium oxidation (anammox) process was firstly investigated in this study. The nitrogen removal capacity of anammox reactor was nearly deprived within 30days under the stress of 5.0mgL^-1 CuNPs and the relative abundance of anammox bacteria (Ca. Kuenenia) was decreased from 29.59% to 17.53%. Meanwhile, copper resistance genes associated with the Cus, Cop and Pco systems were enriched to eliminate excess intracellular copper. After the withdrawal of CuNPs from the influent, the nitrogen removal capacity of anammox biomass recovered completely within 70days. Overall, anammox biomass showed susceptibility, resistance and resilience to the stress of CuNPs. Therefore, the potential impacts of ENPs on anammox-based processes should be of great concern.

Bacterial community shift and incurred performance in response to in situ microbial self-assembly graphene and polarity reversion in microbial fuel cell

In this work, bacterial community shift and incurred performance of graphene modified bioelectrode (GM-BE) in microbial fuel cell (MFC) were illustrated by high throughput sequencing technology and electrochemical analysis. The results showed that Firmicutes occupied 48.75% in graphene modified bioanode (GM-BA), while Proteobacteria occupied 62.99% in graphene modified biocathode (GM-BC), both were dominant bacteria in phylum level respectively. Typical exoelectrogens, including Geobacter, Clostridium, Pseudomonas, Geothrix and Hydrogenophaga, were counted 26.66% and 17.53% in GM-BA and GM-BC. GM-BE was tended to decrease the bacterial diversity and enrich the dominant species. Because of the enrichment of exoelectrogens and excellent electrical conductivity of graphene, the maximum power density of MFC with GM-BA and GM-BC increased 33.1% and 21.6% respectively, and the transfer resistance decreased 83.8% and 73.6% compared with blank bioelectrode. This study aimed to enrich the microbial study in MFC and broaden the development and application for bioelectrode.

A pilot-scale study on the start-up of partial nitrification-anammox process for anaerobic sludge digester liquor treatment

Treatment of sludge digester liquor was successfully accomplished using a pilot-scale partial nitrification-anammox (PN/A) reactor with a nitrogen removal rate (NRR) of 1.23kgN/m³/d. A stable and efficient PN process was attained by controlling the concentration of free ammonia (0.7-8.4mg/L) and free nitrous acid (0.02-1.0mg/L). The application of hydroxylamine played a vital role in the reactivation of anammox bacteria. The bacteria exhibited improved granule properties at a specific input power between 0.065 and 0.097kW/m³, and achieved a specific anammox activity (SAA) of 1.01kgN/kgVSS/d on day 148. From day 0 to 120, the heme c content in the granules increased from 0.42±0.1 to 5.77±1.0µmol/gVSS, with a corresponding increase in NRRs and SAAs. High-throughput sequencing techniques revealed that the dominant anammox bacterial genus was Candidatus Brocadia. These conclusions provide valuable information for the full-scale treatment of sludge digester liquor.

Inhibitory effects of sulfamethoxazole on denitrifying granule properties: Short- and long-term tests

The broad-spectrum antibiotic sulfamethoxazole (SMX) was chosen to assess its short- and long-term effects on denitrifying granules. The SMX concentration and pre-exposure time in batch testing influenced the denitrifying granule activity. In the continuous-flow experiments, no inhibitory effects on the upflow anaerobic sludge blanket performance were observed at SMX concentrations up to 100mgL^-1, probably because of functional redundancy and long-term acclimation. The specific denitrifying activity first decreased to a minimum of 49.3% and then recovered to a level comparable to the initial level as the SMX concentration increased. The changing trend of the extracellular polymer content was consistent with the specific denitrifying activity throughout the process, and relatively high EPS loss ratios (maximum loss of 61.8%) were observed. Additionally, the diameter of the denitrifying granules monophonically increased to a final value of 35.0%. This research provided the application of denitrifying granules to treat wastewater that contained antibiotic.

Short-term performance of enhanced biological phosphorus removal (EBPR) system exposed to erythromycin (ERY) and oxytetracycline (OTC)

The effects of Erythromycin (ERY) and oxytetracycline (OTC), including individual and combinative effect, on enhanced biological phosphorus removal (EBPR) system within a short-term (24h) were evaluated in this study. Results showed that the P-removal efficiency decreased to 34.6% and 0.0% under the effect of ERY (10mg/L) and OTC (10mg/L) for 24h. OTC concentration higher than 5mg/L was sufficient to cause serious adverse impact on the EBPR performance. While the performance of EBPR system will be impacted by ERY above 10mg/L. OTC, due to its special antibacterial action to the gram-negative bacteria which most PAOs belong to, has more serious negative effect on the EBPR performance than ERY does. Moreover, in the combined antibiotics test, neither synergistic nor antagonistic effect was detected between ERY and OTC. Finally, ERY (10mg/L) and OTC (10mg/L) could inhibit the microorganisms' activity, while couldn't induce serious microorganisms death within 24h.

Successful start-up of the anammox process: Influence of the seeding strategy on performance and granule properties

Successful start-up of the anaerobic ammonium oxidation (anammox) process in up-flow sludge blanket reactor was achieved by seeding denitrifying (R0) or mixed denitrifying-anammox granular sludge at a 3:1 volume ratio (R1). The results demonstrated that R1 was successfully started-up on day 40 and had a nitrogen removal rate (NRR) of 0.55kgNm(-3)d(-1). By contrast, it took 98days to start up R0 (0.54kgNm(-3)d(-1)). R0 and R1 achieved maximum NRRs of 5.70 and 12.02kgNm(-3)d(-1), respectively. The biogranules from R1 generally possessed greater specific anammox activity (SAA), higher extracellular polymeric substance (EPS) and heme c content, larger granules and greater settling velocity. Quantitative PCR (qPCR) and high-throughput sequencing techniques were used to monitor the evolution of the bacterial community. These results demonstrated the feasibility of seeding mixed denitrifying-anammox granular sludge to start-up an anammox reactor.

Assessment of anaerobic bacterial diversity and its effects on anaerobic system stability and the occurrence of antibiotic resistance genes

This study evaluated the link between anaerobic bacterial diversity and, the biodegradation of antibiotic combinations and assessed how amending antibiotic combination and increasing concentration of antibiotics in a stepwise fashion influences the development of resistance genes in anaerobic reactors. The biodegradation, sorption and occurrence of the known antibiotic resistance genes (ARGs) of erythromycin and tetracycline were investigated using the processes of UV-HPLC and qPCR analysis respectively. Ion Torrent sequencing was used to detect microbial community changes in response to the addition of antibiotics. The overall results indicated that changes in the structure of a microbial community lead to changes in biodegradation capacity, sorption of antibiotics combinations and occurrence of ARGs. The enhanced biodegradation efficiency appeared to generate variations in the structure of the bacterial community. The results suggested that controlling the ultimate Gram-negative bacterial community, especially Acinetobacter-related populations, may promote the successful biodegradation of antibiotic combinations and reduce the occurrence of ARGs.

Insight into the short- and long-term effects of Cu(II) on denitrifying biogranules

This study aimed to investigate the short- and long-term effects of Cu(2+) on the activity and performance of denitrifying bacteria. The short-term effects of various concentrations of Cu(2+) on the denitrifying bacteria were evaluated using batch assays. The specific denitrifying activity (SDA) decreased from 14.3 ± 2.2 (without Cu(2+)) to 6.1 ± 0.1 mg N h(-1)g(-1) VSS (100 mg Cu(2+)L(-1)) when Cu(2+) increased from 0 to 100 mg L(-1) with an increment of 10 mg Cu(2+)L(-1). A non-competitive inhibition model was used to calculate the 50% inhibition concentration (IC50) of Cu(2+) on denitrifying sludge (30.6 ± 2.5 mg L(-1)). Monod and Luong models were applied to investigate the influence of the initial substrate concentration, and the results suggested that the maximum substrate removal rate would be reduced with Cu(2+) supplementation. Pre-exposure to Cu(2+) could lead to an 18.2-46.2% decrease in the SDA and decreasing percentage of the SDA increased with both exposure time and concentration. In the continuous-flow test, Cu(2+) concentration varied from 1 to 75 mg L(-1); however, no clear deterioration was observed in the reactor, and the reactor was kept stable, with the total nitrogen removal efficiency and total organic carbon efficiency greater than 89.0 and 85.0%, respectively. The results demonstrated the short-term inhibition of Cu(2+) upon denitrification, and no notable adversity was observed during the continuous-flow test after long-term acclimation.

Evaluation of the inhibitory effects of heavy metals on anammox activity: A batch test study

This study evaluated the interactive effect of Cu(II) and Zn(II) on anaerobic ammonium oxidation (anammox) activity using response surface methodology with a central composite design. A regression model equation was developed and validated to predict the normalized anammox activity (NAA) of anammox granules exposed to various heavy metal concentrations. The joint inhibitory effect tended to exacerbate initially and reversed as the concentrations increased and then moderated again. The most severe inhibition, resulting in a NAA of 20.1%, occurred at Cu(II) and Zn(II) concentrations of 16.3 and 20.0mgL(-1), respectively. Notably, the cumulative toxicity was mitigated with the aid of intermittent exposure acclimatization. Additionally, pre-exposure to Cu(II) in the absence of substrates strongly inhibited anammox activity. However, the presence of NO2(-) significantly enhanced Cu(II) inhibition. Therefore, such conditions should be avoided to minimize the disturbance of the anammox process.