Enhancement of microalgae production by embedding hollow light guides to a flat-plate photobioreactor

Blue-light irradiation induced partial nitrification

The role of ray radiation from the sunlight acting on organisms has long-term been investigated. However, how the light with different wavelengths affects nitrification and the involved nitrifiers are still elusive. Here, we found more than 60 % of differentially expressed genes (DEGs) in nitrifiers were observed under irradiation of blue light with wavelengths of 440-480 nm, which were 13.4 % and 20.3 % under red light and white light irradiation respectively. Blue light was more helpful to achieve partial nitrification rather than white light or red light, where ammonium oxidization by ammonia-oxidizing archaea (AOA) with the increased relative abundance from 8.6 % to 14.2 % played a vital role. This was further evidenced by the enhanced TCA cycle, reactive oxygen species (ROS) scavenge and DNA repair capacity in AOA under blue-light irradiation. In contrast, nitrite-oxidizing bacteria (NOB) was inhibited severely to achieve partial nitrification, and the newly discovered encoded blue light photoreceptor proteins made them more sensitive to blue light and hindered cell activity. Ammonia-oxidizing bacteria (AOB) expressed genes for DNA repair capacity under blue-light irradiation, which ensured their tiny impact by light irradiation. This study provided valuable insights into the photosensitivity mechanism of nitrifiers and shed light on the diverse regulatory by light with different radiation wavelengths in artificial systems, broadening our comprehension of the nitrogen cycle on earth.

Lighting the way to sustainable development: Physiological response and light control strategy in microalgae-based wastewater treatment under illumination

The Sustainable Development Goals link pollutant control with carbon dioxide reduction. Toward the goal of pollutant and carbon reduction, microalgae-based wastewater treatment (MBWT), which can simultaneously remove pollutants and convert carbon dioxide into biomass with value-added metabolites, has attracted considerable attention. The photosynthetic organism microalgae and the photobioreactor are the functional body and the operational carrier of the MBWT system, respectively; thus, light conditions profoundly influence its performance. Therefore, this review takes the general rules of how light influences the performance of MBWT systems as a starting point to elaborate the light-influenced mechanisms in microalgae and the light control strategies for photobioreactors from the inside out. Wavelength, light intensity and photoperiod solely or interactively affect biomass accumulation, pollutant removal, and value-added metabolite production in MBWT. Physiological processes, including photosynthesis, photooxidative damage, light-regulated gene expression, and nutrient uptake, essentially explain the performance influence of MBWT and are instructive for specific microalgal strain improvement strategies. In addition, light causes unique reactions in MBWT systems as it interacts with components such as photooxidative damage enhancers present in types of wastewater. In order to provide guidance for photobioreactor design and light control in a large-scale MBWT system, wavelength transformation, light transmission, light source distribution, and light-dark cycle should be considered in addition to adjusting the light source characteristics. Finally, based on current research vacancies and challenges, future research orientation should focus on the improvement of microalgae and photobioreactor, as well as the integration of both.

Phycobiliproteins from microalgae: research progress in sustainable production and extraction processes

Phycobiliproteins (PBPs), one of the functional proteins from algae, are natural pigment-protein complex containing various amino acids and phycobilins. It has various activities, such as anti-inflammatory and antioxidant properties. And are potential for applications in food, cosmetics, and biomedicine. Improving their metabolic yield is of great interest. Microalgaes are one of the important sources of PBPs, with high growth rate and have the potential for large-scale production. The key to large-scale PBPs production depends on accumulation and recovery of massive productive alga in the upstream stage and the efficiency of microalgae cells breakup and extract PBPs in the downstream stage. Therefore, we reviewed the status quo in the research and development of PBPs production, summarized the advances in each stage and the feasibility of scaled-up production, and demonstrated challenges and future directions in this field.

Design a novel internally illuminated mirror photobioreactor to improve microalgae production through homogeneous light distribution

In this study, a novel internally illuminated mirror photobioreactor (IIM-PBR) was designed to improve microalgae biomass production through providing a homogenous light distribution in cultivation medium. The performance of the IIM-PBR was compared with internally illuminated control photobioreactor (IIC-PBR) and externally illuminated control photobioreactor (EIC-PBR) in terms of cell growth, wastewater treatment and bioproducts generation. Compared with the IIC-PBR and EIC-PBR, the IIM-PBR increased microalgae growth rate up to 60 % and 30%, respectively. Municipal wastewater treatment revealed that the IIM-PBR could significantly improve nutrients removal as the final removal efficiencies of 90%, 95% and 90% were obtained for nitrate, phosphate and COD, respectively. Moreover, the IIM-PBR increased the total bioproducts production by 89% and 46% compared to in the IIC-PBR and EIC-PBR, respectively. Based on the energy consumption calculation, the mirror's light-reflective properties of the IIM-PBR resulted in a significant reduction of total energy consumption (∼10 times).

Trends in microalgal-based systems as a promising concept for emerging contaminants and mineral salt recovery from municipal wastewater

In the context of climate change leading to water scarcity for many people in the world, the treatment of municipal wastewater becomes a necessity. However, the reuse of this water requires secondary and tertiary treatment processes to reduce or eliminate a load of dissolved organic matter and various emerging contaminants. Microalgae have shown hitherto high potential applications of wastewater bioremediation thanks to their ecological plasticity and ability to remediate several pollutants and exhaust gases from industrial processes. However, this requires appropriate cultivation systems allowing their integration into wastewater treatment plants at appropriate insertion costs. This review aims to present different open and closed systems currently used in the treatment of municipal wastewater by microalgae. It provides an exhaustive approach to wastewater treatment systems using microalgae, integrating the most suitable used microalgae species and the main pollutants present in the treatment plants, with an emphasis on emerging contaminants. The remediation mechanisms as well as the capacity to sequester exhaust gases were also described. The review examines constraints and future perspectives of microalgae cultivation systems in this line of research.

Utilization of dark fermentation effluent for algal cultivation in a modified airlift photobioreactor for biomass and biocrude production

Developing an efficient photobioreactor (PBR) and reducing freshwater dependence are among the significant challenges for generating 3rd generation biomass feedstock. Addressing these, the present study focused on developing a modified airlift (MoAL) PBR. Its performance was further evaluated and compared with the traditional airlift PBR by cultivating microalgae in dark fermentation spent wash. Lower mixing time and higher interfacial mass transfer coefficient was observed in the MoAL PBR having a perforated draft tube. Experimentally, the MoAL exhibited the maximum biomass concentration of 3.18 g L^-1, which was 30% higher than that of the conventional airlift PBR. The semi-continuous operation of the MoAL (with water recycling) achieved the maximum biomass productivity of 0.83 g L^-1 d^-1, two folds superior to that of batch culture. The comprehensive biomass characterization (proximate, ultimate, and thermochemical) further confirmed its potential for bioenergy application. Considering that, hydrothermal liquefaction of the biomass resulted in a maximum biocrude yield of 31% w/w with a higher heating value (HHV) of 36.6 MJ kg^-1. In addition, the biocrude comprised 66.6% w/w lighter fraction (<343 °C), including 21.5% w/w of heavy naphtha, 20.5% w/w of kerosene, and 24.6% w/w of diesel. The results can help develop sustainable technology for simultaneous wastewater remediation and biocrude production.

Integrating wind-driven agitating blade into a floating photobioreactor to enhance fluid mixing and microalgae growth

Aiming at optimizing the poor fluid mixing state in the traditional horizontal floating photobioreactors and reducing the high energy consumption and operational cost induced by electric-driven mixing, a novel floating photobioreactor with an embedded wind-driven agitating blade (WDAB-FPBR) was proposed in this study, which can effectively utilize both wind and wave energy for fluid mixing. The results show that the selected wind-driven agitating blade contributed to a decrement of 75.3% in mixing time and an increment of 87.5% in mass transfer coefficient, and meanwhile strengthened the fluid velocity along the light gradient. Owing to the enhanced fluid flow and mixing properties, an even distribution of algae cells was achieved in the WDAB floating photobioreactor, which resulted in an improvement of 140% in the photosynthesis efficiency of microalgae. From this, the biomass yield and carbon removal ratio showed an increment of 88.9% and 73.9%, respectively.

Recent progress on converting CO2 into microalgal biomass using suspended photobioreactors

Inhomogeneous light distribution and poor CO₂ transfer capacity are two critical concerns impeding microalgal photosynthesis in practical suspended photobioreactors (PBRs). To provide valuable guidance on designing high-performance PBRs, recent progress on enhancing light and CO₂ availabilities is systematically summarized in this review. Particularly, for the first time, the strategies on elevating light availability are classified and discussed from the perspectives of increasing incident light intensity, introducing internal illumination, optimizing flow field, regulating biomass concentrations, and enlarging illumination surface areas. Meanwhile, the strategies on enhancing CO₂ light availability are outlined from the aspects of generating smaller bubbles, extending bubbles residence time, and facilitating CO₂ dissolution using extra additives. Given the microalgal biomass production using current PBRs are still suffering from low productivity and economic feasibility, the possible future directions for PBRs implementation and development are presented. Altogether, this review is beneficial to furthering development of PBRs as a practical technology.

Microalgal Biomass as Feedstock for Bacterial Production of PHA: Advances and Future Prospects

The search for biodegradable plastics has become the focus in combating the global plastic pollution crisis. Polyhydroxyalkanoates (PHAs) are renewable substitutes to petroleum-based plastics with the ability to completely mineralize in soil, compost, and marine environments. The preferred choice of PHA synthesis is from bacteria or archaea. However, microbial production of PHAs faces a major drawback due to high production costs attributed to the high price of organic substrates as compared to synthetic plastics. As such, microalgal biomass presents a low-cost solution as feedstock for PHA synthesis. Photoautotrophic microalgae are ubiquitous in our ecosystem and thrive from utilizing easily accessible light, carbon dioxide and inorganic nutrients. Biomass production from microalgae offers advantages that include high yields, effective carbon dioxide capture, efficient treatment of effluents and the usage of infertile land. Nevertheless, the success of large-scale PHA synthesis using microalgal biomass faces constraints that encompass the entire flow of the microalgal biomass production, i.e., from molecular aspects of the microalgae to cultivation conditions to harvesting and drying microalgal biomass along with the conversion of the biomass into PHA. This review discusses approaches such as optimization of growth conditions, improvement of the microalgal biomass manufacturing technologies as well as the genetic engineering of both microalgae and PHA-producing bacteria with the purpose of refining PHA production from microalgal biomass.

A comprehensive review on the use of algal-bacterial systems for wastewater treatment with emphasis on nutrient and micropollutant removal

The scarcity of water resources and environmental pollution have highlighted the need for sustainable wastewater treatment. Existing conventional treatment systems are energy-intensive and not always able to meet stringent disposal standards. Recently, algal-bacterial systems have emerged as environmentally friendly sustainable processes for wastewater treatment and resource recovery. The algal-bacterial systems work on the principle of the symbiotic relationship between algae and bacteria. This paper comprehensively discusses the most recent studies on algal-bacterial systems for wastewater treatment, factors affecting the treatment, and aspects of resource recovery from the biomass. The algal-bacterial interaction includes cell-to-cell communication, substrate exchange, and horizontal gene transfer. The quorum sensing (QS) molecules and their effects on algal-bacterial interactions are briefly discussed. The effect of the factors such as pH, temperature, C/N/P ratio, light intensity, and external aeration on the algal-bacterial systems have been discussed. An overview of the modeling aspects of algal-bacterial systems has been provided. The algal-bacterial systems have the potential for removing micropollutants because of the diverse possible interactions between algae-bacteria. The removal mechanisms of micropollutants - sorption, biodegradation, and photodegradation, have been reviewed. The harvesting methods and resource recovery aspects have been presented. The major challenges associated with algal-bacterial systems for real scale implementation and future perspectives have been discussed. Integrating wastewater treatment with the algal biorefinery concept reduces the overall waste component in a wastewater treatment system by converting the biomass into a useful product, resulting in a sustainable system that contributes to the circular bioeconomy.

Design and applications of photobioreactors- a review

There has been increasing attention in recent years on the use of photobioreactors for various biotechnological applications, especially for the cultivation of microalgae. Photobioreactors-based production of photosynthetic microorganisms furnish several advantages as minimising toxicity and providing improved conditions. However, the designing and scaling-up of photobioreactors (PBRs) remain a challenge. Due to huge capital investment and operating cost, there is a deficiency of suitable PBRs for development of photosynthetic microorganisms on large-scale. It is, therefore, highly desirable to understand the current state-of-the-art PBRs, their advantages and limitations so as to classify different PBRs as per their most suited applications. This review provides a holistic overview of the discreet features of diverse PBR designs and their purpose in microalgae growth and biohydrogen production and also summarizes the recent development in use of hybrid PBRs to increase their working efficiency and overall economics of their operation for the production of value-added products.

How Interfacial Properties Affect Adhesion: An Analysis from the Interactions between Microalgal Cells and Solid Substrates

Microalgal biofilm, a stable community of many algal cells attached to a solid substrate, plays a significant role in the efficient accumulation of renewable energy feedstocks, wastewater treatment, and carbon reduction. The adhesion tendency of microalgal cells on solid substrates is the basis for controlling the formation and development of microalgal biofilm. To promote the adhesion of microalgal cells on solid substrates, it is necessary to clarify which surface properties have to be changed in the most critical factors affecting the adhesion. However, there have been few systematic discussions on what surface properties influence the adhesion tendency of algal cells on solid substrates. In this study, the essential principle of microalgal cell adhesion onto solid substrates was explored from the perspective of the interaction energy between microalgal cells and solid substrates. The influence of surface properties between microalgal cells and solid substrates on interaction energies was discussed via extended Derjaguin-Landau-Verwey-Overbeek (eDLVO) theory and a sensitivity analysis. The results showed that surface properties, including surface potential (ξ) and surface free energy components, significantly affect the adhesion tendency of microalgal cells on different solid substrates. When the solid surface possesses positive charges (ξ > 0), reducing ξ or the electron donor components of the solid substrate (γ_s^-) is an effective measure to promote microalgal cell adhesion onto the solid substrate. When the solid surface possesses negative charges (ξ < 0), an increase in either γ_s^- or the absolute value of ξ should be avoided in the process of microalgae adhesion. Overall, this research provides a direction for the selection of solid substrates and a direction for surface modification to facilitate the adhesion tendency of microalgal cells on solid substrates under different scenarios.

Revealing the synergistic effects of cells, pigments, and light spectra on light transfer during microalgae growth: A comprehensive light attenuation model

As the sole energy for photosynthesis, light decrease rapidly with path due to absorption by pigments and scattering by cells in microalgal suspensions. By comprehensively considering cell concentrations, pigment components, and light spectra, a modified Cornet model for light transmission in microalgal suspensions is established. The developed model better fits experimental data with a higher adjusted R², which is 5% higher than the model that is based only on cell concentration. The attenuation of blue light is the most severe, followed by red and green light. Among the three main pigments, total carotenoids contribute the most to the absorption of blue and green light (with contribution coefficients of 89.26 ± 4.53% and 46.04 ± 3.77%, respectively), and chlorophyll a contributes the most to the absorption of red light (with a contribution coefficient of 75.33 ± 5.08%). This study provides a better understanding and prediction of light transmission during microalgal cultivation.

Global sensitivity and uncertainty analysis of a microalgae model for wastewater treatment

The results of a global sensitivity and uncertainty analysis of a microalgae model applied to a Membrane Photobioreactor (MPBR) pilot plant were assessed. The main goals of this study were: (I) to identify the sensitivity factors of the model through the Morris screening method, i.e. the most influential factors; (II) to calibrate the influential factors online or offline; and (III) to assess the model's uncertainty. Four experimental periods were evaluated, which encompassed a wide range of environmental and operational conditions. Eleven influential factors (e.g. maximum specific growth rate, light intensity and maximum temperature) were identified in the model from a set of 34 kinetic parameters (input factors). These influential factors were preferably calibrated offline and alternatively online. Offline/online calibration provided a unique set of model factor values that were used to match the model results with experimental data for the four experimental periods. A dynamic optimization of these influential factors was conducted, resulting in an enhanced set of values for each period. Model uncertainty was assessed using the uncertainty bands and three uncertainty indices: p-factor, r-factor and ARIL. Uncertainty was dependent on both the number of influential factors identified in each period and the model output analyzed (i.e. biomass, ammonium and phosphate concentration). The uncertainty results revealed a need to apply offline calibration methods to improve model performance.

Enhancing microalgae production by installing concave walls in plate photobioreactors

In order to optimize light distribution for promoting biomass growth rate of Chlorella pyrenoidosa, concave walls were installed in plate photobioreactors (PBR) to generate rotational flow field of microalgal solution circulated from top inlets to bottom outlets. Flow vortices in four corners of concave-wall PBR resulted in decreased mixing time and increased mass transfer coefficient. The CO₂ bio-fixation by C. pyrenoidosa increased by 27% and chlorophyll-a concentration enhanced by 18.5% in concave-wall PBR compared to those in control (flat-wall) PBR. The concave walls diverge light rays to enhance frontal light exposure and supply more light photons into interior regions of PBRs. The promotion in light distribution and vortex flow field with concave walls enhanced light and nutrients utilization by microalgal cells, leading to an increased biomass growth rate by 21%.

Challenges in microalgal biofuel production: A perspective on techno economic feasibility under biorefinery stratagem

Rapidly exhausting fossil fuels combined with the ever-increasing demand for energy led to an ongoing search for alternative energy sources to meet the transportation, manufacturing, domestic and other energy demands of the grown population. Microalgae are at the forefront of alternative energy research due to their significant potential as a renewable feedstock for biofuels. However, microalgae platforms have not found a way into industrial-scale bioenergy production due to various technical and economic constraints. The present review provides a detailed overview of the challenges in microalgae production processes for bioenergy purposes with supporting techno-economic assessments related to microalgae cultivation, harvesting and downstream processes required for crude oil or biofuel production. In addition, biorefinery approaches that can valorize the by-products or co-products in microalgae production and enhance the techno-economics of the production process are discussed.

Kinetic modeling of autotrophic microalgae mainline processes for sewage treatment in phosphorus-replete and -deplete culture conditions

A kinetic model of autotrophic microalgal growth in sewage was developed to determine the biokinetic processes involved, including carbon-, nitrogen- and phosphorus-limited microalgal growth, dependence on light intensity, temperature and pH, light attenuation and gas exchange to the atmosphere. A new feature was the differentiation between two metabolic pathways of phosphorus consumption according to the availability of extracellular phosphorus. Two scenarios were differentiated: phosphorus-replete and -deplete culture conditions. In the former, the microalgae absorbed phosphorus to grow and store polyphosphate. In the latter the microalgae used the stored polyphosphate as a phosphorus source for growth. Calibration and validation were performed with experimental data from a pilot-scale membrane photobioreactor (MPBR) fed with the permeate obtained from an anaerobic membrane bioreactor (AnMBR) pilot plant fed with real urban wastewater. 12 of the model parameters were calibrated. Despite the dynamics involved in the operating and environmental conditions, the model was able to reproduce the overall process performance with a single set of model parameters values. Four periods of different environmental and operational conditions were accurately simulated. Regarding the former, light and temperature ranged 10-406 μmol·m^-2·s^-1 and 19.7-32.1 °C, respectively. Concerning the later, the photobioreactors widths were 0.25 and 0.10 m, and the biomass and hydraulic retention times ranged 3-4.5 and 1.5-2.5 days, respectively. The validation of the model resulted in an overall correlation coefficient (R²) of 0.9954. The simulation results showed the potential of the model to predict the dynamics of the different components: the relative proportions of microalgae, nitrogen and phosphorus removal, polyphosphate storage and consumption, and soluble organic matter concentration, as well as the influence of environmental parameters on the microalgae's biokinetic processes. The proposed model could provide an effective tool for the industry to predict microalgae production and comply with the discharge limits in areas declared sensitive to eutrophication.

Boosting photo-biochemical conversion and carbon dioxide bio-fixation of Chlorella vulgaris in an optimized photobioreactor with airfoil-shaped deflectors

Aiming at ameliorating the poor hydrodynamic regimes and uneven light distribution in the conventional airlift flat-plate photobioreactor (AFP-PBR), a novel PBR with static airfoil-shaped deflectors (ASD-PBR) is proposed in this study to boost the microalgal biomass manipulation and hence the photo-biochemical conversion. The ASD module accelerated the circulation of microalgal suspension from the center to two sides with the help of bubbling so that the microalgal cells got more opportunities to access the light source. Compared with the control PBR, the solution velocity along the incident light direction increased by 114.8% in the newly-proposed ASD-PBR. Furthermore, the ASD module also served as a static mixer, which resulted in an increment of 11.5% in mass transfer coefficient and a decrement of 21.4% in mixing time. The amended hydrodynamic characteristics eventually contributed to an improvement of 18.3% and 10.9% in the maximum algal biomass yield and CO₂ fixation rate, respectively.

Enhancing CO2 photo-biochemical conversion in a newly-designed attached photobioreactor characterized by stacked horizontal planar waveguide modules

Aiming at alleviating the adverse effects on attached microalgae biofilm growth caused by heterogeneous spatial light distributions within the attached cultivation photobioreactors (PBRs), an innovative PBR integrated with stacked horizontal planar waveguide modules (SHPW-PBR) was proposed in this work. Different from the conventional PBR, the emergent light from the external LED light bars were guided and evenly redistributed within the SHPW-PBR by the planar waveguides and hence provided light energy for microalgae cells photoautotrophic growth. In comparison with the control PBR, the average light intensity illuminating the attached Chlorella vulgaris biofilm in the SHPW-PBR was elevated by 204.11% and contributed to a 145.20% improvement on areal C. vulgaris biofilm production. Thereafter, responses of attached C. vulgaris biofilm growth in the SHPW-PBR to various light intensities were evaluated and the maximum areal C. vulgaris biofilm density reached 90.43 g m^-2 under the light intensity of 136 μmol m^-2 s^-1 after 9 days cultivation. Furthermore, the SHPW-PBR can be easily scaled-up by increasing the quantity of the stacked planar waveguide modules and thus shows great potential in biofilm-based biomass production.

Bio-processing of algal bio-refinery: a review on current advances and future perspectives

Microalgae biomass contains various useful bio-active components. Microalgae derived biodiesel has been researched for almost two decades. However, sole biodiesel extraction from microalgae is time-consuming and is not economically feasible due to competitive fossil fuel prices. Microalgae also contains proteins and carbohydrates in abundance. Microalgae are likewise utilized to extract high-value products such as pigments, anti-oxidants and long-chain polyunsaturated fatty acids which are useful in cosmetic, pharmaceutical and nutraceutical industry. These compounds can be extracted simultaneously or sequentially after biodiesel extraction to reduce the total expenditure involved in the process. This approach of bio-refinery is necessary to promote microalgae in the commercial market. Researchers have been keen on utilizing the bio-refinery approach to exploit the valuable components encased by microalgae. Apart from all the beneficial components housed by microalgae, they also help in reducing the anthropogenic CO2 levels of the atmosphere while utilizing saline or wastewater. These benefits enable microalgae as a potential source for bio-refinery approach. Although life-cycle analysis and economic assessment do not favor the use of microalgae biomass feedstock to produce biofuel and co-products with the existing techniques, this review still aims to highlight the beneficial components of microalgae and their importance to humans. In addition, this article also focuses on current and future aspects of improving the feasibility of bio-processing for microalgae bio-refinery.

Photo-bioreactor design for microalgae: A review from the aspect of CO2 transfer and conversion

Photobioreactor (PBR) is the most critical equipment for microalgal photosynthetic fixation of CO₂. It provides suitable environmental conditions, such as CO₂, light and nutrients, for microalgal growth. As the major carbon source for microalgae, CO₂ gas is pumped into PBR with the formation of bubbles and formed gas-liquid flow. The gas-liquid flow affects CO₂ and nutrients transmission as well as microalgae cells distribution in PBR, thereby affecting the biochemical reaction of microalgae. While the migration and transport of biochemical reaction products affect the two-phase flow, phase distribution and flow resistance in the PBR in return, thus affecting the transport of light and nutrients. Therefore, microalgal photosynthetic rate is determined synthetically by two-phase flow and the transport of CO₂, light and nutrients in PBR. Deep understanding of gas-liquid two-phase flow, energy and mass transfer coupling with microalgal growth in PBR is the cornerstone for the design of an efficient microalgae PBR.

A critical review on designs and applications of microalgae-based photobioreactors for pollutants treatment

The development of the photobioreactors (PBs) is recently noticeable as cutting-edge technology while the correlation of PBs' engineered elements such as modellings, configurations, biomass yields, operating conditions and pollutants removal efficiency still remains complex and unclear. A systematic understanding of PBs is therefore essential. This critical review study is to: (1) describe the modelling approaches and differentiate the outcomes; (2) review and update the novel technical issues of PBs' types; (3) study microalgae growth and control determined by PBs types with comparison made; (4) progress and compare the efficiencies of contaminants removal given by PBs' types and (5) identify the future perspectives of PBs. It is found that Monod model's shortcoming in internal substrate utilization is well fixed by modified Droop model. The corroborated data also remarks an array of PBs' types consisting of flat plate, column, tubular, soft-frame and hybrid configuration in which soft-frame and hybrid are the latest versions with higher flexibility, performance and smaller foot-print. Flat plate PBs is observed with biomass yield being 5 to 20 times higher than other PBs types while soft-frame and membrane PBs can also remove pharmaceutical and personal care products (PPCPs) up to 100%. Looking at an opportunity for PBs in sustainable development, the flat plate PBs are applicable in PB-based architectures and infrastructures indicating an encouraging revenue-raising potential.

Study of Optical Configurations for Multiple Enhancement of Microalgal Biomass Production

Microalga is a promising biomass feedstock to restore the global carbon balance and produce sustainable bioenergy. However, the present biomass productivity of microalgae is not high enough to be marketable mainly because of the inefficient utilization of solar energy. Here, we study optical engineering strategies to lead to a breakthrough in the biomass productivity and photosynthesis efficiency of a microalgae cultivation system. Our innovative optical system modelling reveals the theoretical potential (>100 g m⁻² day⁻¹) of the biomass productivity and it is used to compare the optical aspects of various photobioreactor designs previously proposed. Based on the optical analysis, the optimized V-shaped configuration experimentally demonstrates an enhancement of biomass productivity from 20.7 m⁻² day⁻¹ to 52.0 g m⁻² day⁻¹, under the solar-simulating illumination of 7.2 kWh m⁻² day⁻¹, through the dilution and trapping of incident energy. The importance of quantitative optical study for microalgal photosynthesis is clearly exhibited with practical demonstration of the doubled light utilization efficiencies.

Generating cycle flow between dark and light zones with double paddlewheels to improve microalgal growth in a flat plate photo-bioreactor

Double paddlewheels were proposed to generate cycle flow for increasing horizontal fluid velocity between dark and light zones in a flat plate photo-bioreactor, which strengthened the mass transfer and the mixing effect to improve microalgal growth with 15% CO₂. Numerical fluid dynamics were used to simulate the cycle flow field with double paddlewheels. The local flow field measured with particle image velocimetry fitted well with the numerical simulation results. The horizontal fluid velocity in the photo-bioreactor was markedly increased from 5.8 × 10^-5 m/s to 0.45 m/s with the rotation of double paddlewheels, resulting in a decreased dark/light cycle period. Therefore, bubble formation time and diameter reduced by 24.4% and 27.4%, respectively. Meanwhile, solution mixing time reduced by 31.3% and mass transfer coefficient increased by 41.2%. The biomass yield of microalgae Nannochloropsis Oceanic increased by 127.1% with double paddlewheels under 15% CO₂ condition.

Application of growth-phase based light-feeding strategies to simultaneously enhance Chlorella vulgaris growth and lipid accumulation

Considering the variations of optimal light intensity required by microalgae cells along with growth phases, growth-phase light-feeding strategies were proposed and verified in this paper, aiming at boosting microalgae lipid productivity from the perspective of light conditions optimization. Experimental results demonstrate that under an identical time-averaged light intensity, the light-feeding strategies characterized by stepwise incremental light intensities showed a positive effect on biomass and lipid accumulation. The lipid productivity (235.49 mg L^-1 d^-1) attained under light-feeding strategy V (time-averaged light intensity: 225 μmol m^-2 s^-1) was 52.38% higher over that obtained under a constant light intensity of 225 μmol m^-2 s^-1. Subsequently, based on light-feeding strategy V, microalgae lipid productivity was further elevated to 312.92 mg L^-1 d^-1 employing a two-stage based light-feeding strategy V₅₆₀ (time-averaged light intensity: 360 μmol m^-2 s^-1), which was 79.63% higher relative to that achieved under a constant light intensity of 360 μmol m^-2 s^-1.

Optimizing light distribution and controlling biomass concentration by continuously pre-harvesting Spirulina platensis for improving the microalgae production

To improve the microalgae production in batch cultivation, a cultivation mode that continuously pre-harvesting Spirulina platensis from photobioreactor (PBR) with culture medium recycling was proposed. For realizing the continuously pre-harvesting cultivation mode, a Spirulina platensis culture column PBR with overflowing device was designed, which could adjust pre-harvesting rate through the overflowing device. By adjusting the pre-harvesting rate, the biomass concentration could be kept when biomass accumulation and pre-harvesting biomass were equal. Hence, the meridional light attenuation could be reduced by controlling biomass concentration in PBR. The maximum microalgae production were 44.6%, 10.98% higher in total production than that cultivated in batch cultivation without pre-harvesting and periodically pre-harvesting cultivation mode respectively, which was realized in pre-harvesting rate 0.228 mL min^-1 and biomass concentration 1.8 g L^-1. Besides, a model was built by mass balance and polynomial fitting for evaluating the continuously pre-harvesting cultivation mode.

Boosting Nannochloropsis oculata growth and lipid accumulation in a lab-scale open raceway pond characterized by improved light distributions employing built-in planar waveguide modules

Aiming at alleviating the adverse effect of poor light penetrability on microalgae growth, planar waveguide modules functioned as diluting and redistributing the intense incident light within microalgae culture more homogeneously were introduced into a lab-scale open raceway pond (ORP) for Nannochloropsis oculata cultivation. As compared to the conventional ORP, the illumination surface area to volume ratio and effective illuminated volume percentage in the proposed ORP were respectively improved by 5.53 times and 19.68-172.72%. Consequently, the superior light distribution characteristics in the proposed ORP contributed to 193.33% and 443.71% increase in biomass concentration and lipid yield relative to those obtained in conventional ORP, respectively. Subsequently, the maximum biomass concentration (2.31 g L^-1) and lipid yield (1258.65 mg L^-1) was obtained when the interval between adjacent planar waveguide modules was 18 mm. The biodiesel produced in PWM-ORPs showed better properties than conventional ORP due to higher MUFA and C18:1 components proportions.

Simultaneous enhancement of Chlorella vulgaris growth and lipid accumulation through the synergy effect between light and nitrate in a planar waveguide flat-plate photobioreactor

Interval between adjacent planar waveguides and light intensity emitted from waveguide surface were the primary two factors affecting light distribution characteristics in the planar waveguide flat-plate photobioreactor (PW-PBR). In this paper, the synergy effect between light and nitrate in the PW-PBR was realized to simultaneously enhance microalgae growth and lipid accumulation. Under an interval of 10mm between adjacent planar waveguides, 100% of microalgae cells in regions between adjacent waveguides could be illuminated. Chlorella vulgaris growth and lipid accumulation were synchronously elevated as light intensities emitted from planar waveguide surface increasing. With an identical initial nitrate concentration of 18mM, the maximum lipid content (41.66% in dry biomass) and lipid yield (2200.25mgL^-1) were attained under 560μmolm^-2s^-1, which were 86.82% and 133.56% higher relative to those obtained under 160μmolm^-2s^-1, respectively. The PW-PBR provides a promising way for microalgae lipid production.

Microalgae, old sustainable food and fashion nutraceuticals

Microalgae have been used for centuries to provide nourishment to humans and animals, only very recently they have become much more widely cultured and harvested at large industrial scale. This paper reviews the potential health benefits and nutrition provided by microalgae whose benefits are contributing to expand their market. We also point out several key challenges that remain to be addressed in this field.

Integrating planar waveguides doped with light scattering nanoparticles into a flat-plate photobioreactor to improve light distribution and microalgae growth

Industrially manufactured planar waveguides doped with light scattering nanoparticles, which can dilute and redistribute the intense incident light within microalgae suspension more uniformly, were introduced into a flat-plate photobioreactor (PBR) with a width of 25cm to alleviate the adverse effect of poor light penetrability on microalgae growth. Compared with the flat-plate PBR without waveguides, the illumination surface area per unit volume in the proposed PBR was increased by 10.3 times. During the whole cultivation period, the illuminated volume fractions in the proposed PBR were 21.4-410% higher than those in the flat-plate PBR without waveguides. Consequently, attributed to the optimized light distribution in the proposed PBR, a 220% improvement in biomass production was obtained relative to that in the flat-plate PBR without waveguides. Furthermore, higher light output intensities emitted from the planar waveguide surfaces and increased microalgae growth rates were achieved by decreasing the length of planar waveguides.

Photon management for augmented photosynthesis

Microalgae and cyanobacteria are some of nature's finest examples of solar energy conversion systems, effortlessly transforming inorganic carbon into complex molecules through photosynthesis. The efficiency of energy-dense hydrocarbon production by photosynthetic organisms is determined in part by the light collected by the microorganisms. Therefore, optical engineering has the potential to increase the productivity of algae cultivation systems used for industrial-scale biofuel synthesis. Herein, we explore and report emerging and promising material science and engineering innovations for augmenting microalgal photosynthesis.

Photosynthetic microalgae could provide an ecologically sustainable route to produce solar biofuels and high-value chemicals. Here, the authors review various optical management strategies used to manipulate the incident light in order to increase the efficiency of microalgae biofuel production.

Improvement on light penetrability and microalgae biomass production by periodically pre-harvesting Chlorella vulgaris cells with culture medium recycling

To improve light penetrability and biomass production in batch cultivation, a cultivation mode that periodically pre-harvesting partial microalgae cells from suspension with culture medium recycling was proposed. By daily pre-harvesting 30% microalgae cells from the suspension, the average light intensity in the photobioreactor (PBR) was enhanced by 27.05-122.06%, resulting in a 46.48% increase in total biomass production than that cultivated in batch cultivation without pre-harvesting under an incident light intensity of 160μmolm(-2)s(-1). Compared with the semi-continuous cultivation with 30% microalgae suspension daily replaced with equivalent volume of fresh medium, nutrients and water input was reduced by 60% in the proposed cultivation mode but with slightly decrease (12.82%) in biomass production. No additional nutrient was replenished when culture medium recycling. Furthermore, higher pre-harvesting ratios (40%, 60%) and lower pre-harvesting frequencies (every 2, 2.5days) were not advantageous for the pre-harvesting cultivation mode.