Gradient domestication of Haematococcus pluvialis mutant with 15% CO2 to promote biomass growth and astaxanthin yield

Realization process of microalgal biorefinery: The optional approach toward carbon net-zero emission

Increasing carbon dioxide (CO2) emission has already become a dire threat to the human race and Earth's ecology. Microalgae are recommended to be engineered as CO2 fixers in biorefinery, which play crucial roles in responding climate change and accelerating the transition to a sustainable future. This review sorted through each segment of microalgal biorefinery to explore the potential for its practical implementation and commercialization, offering valuable insights into research trends and identifies challenges that needed to be addressed in the development process. Firstly, the known mechanisms of microalgal photosynthetic CO2 fixation and the approaches for strain improvement were summarized. The significance of process regulation for strengthening fixation efficiency and augmenting competitiveness was emphasized, with a specific focus on CO2 and light optimization strategies. Thereafter, the massive potential of microalgal refineries for various bioresource production was discussed in detail, and the integration with contaminant reclamation was mentioned for economic and ecological benefits. Subsequently, economic and environmental impacts of microalgal biorefinery were evaluated via life cycle assessment (LCA) and techno-economic analysis (TEA) to lit up commercial feasibility. Finally, the current obstacles and future perspectives were discussed objectively to offer an impartial reference for future researchers and investors.

Unlocking the potential of microalgae bio-factories for carbon dioxide mitigation: A comprehensive exploration of recent advances, key challenges, and energy-economic insights

Microalgae are promising alternatives to mitigate atmospheric CO₂ owing to their fast growth rates, resilience in the face of adversity and ability to produce a wide range of products, including food, feed supplements, chemicals, and biofuels. However, to fully harness the potential of microalgae-based carbon capture technology, further advancements are required to overcome the associated challenges and limitations, particularly with regards to enhancing CO₂ solubility in the culture medium. This review provides an in-depth analysis of the biological carbon concentrating mechanism and highlights the current approaches, including species selection, optimization of hydrodynamics, and abiotic components, aimed at improving the efficacy of CO₂ solubility and biofixation. Moreover, cutting-edge strategies such as gene mutation, bubble dynamics and nanotechnology are systematically outlined to elevate the CO₂ biofixation capacity of microalgal cells. The review also evaluates the energy and economic feasibility of using microalgae for CO₂ bio-mitigation, including challenges and prospects for future development.

Application of Adaptive Laboratory Evolution in Lipid and Terpenoid Production in Yeast and Microalgae

Due to the complexity of metabolic and regulatory networks in microorganisms, it is difficult to obtain robust phenotypes through artificial rational design and genetic perturbation. Adaptive laboratory evolution (ALE) engineering plays an important role in the construction of stable microbial cell factories by simulating the natural evolution process and rapidly obtaining strains with stable traits through screening. This review summarizes the application of ALE technology in microbial breeding, describes the commonly used methods for ALE, and highlights the important applications of ALE technology in the production of lipids and terpenoids in yeast and microalgae. Overall, ALE technology provides a powerful tool for the construction of microbial cell factories, and it has been widely used in improving the level of target product synthesis, expanding the range of substrate utilization, and enhancing the tolerance of chassis cells. In addition, in order to improve the production of target compounds, ALE also employs environmental or nutritional stress strategies corresponding to the characteristics of different terpenoids, lipids, and strains.

CO2 gradient domestication improved high-concentration CO2 tolerance and photoautotrophic growth of Euglena gracilis

In order to improve CO₂ biofixation efficiency of microalgae cultivated with coal-chemical flue gas, CO₂ gradient domestication was employed to improve high-concentration CO₂ tolerance and photoautotrophic growth of acid-tolerant Euglena gracilis. The dried biomass yield of photoautotrophic growth of E.gracilis increased from 1.09 g/L (wild-type strain) by 21 % to 1.32 g/L with CO₂ gradient domestication to 15 % CO₂. The RuBisCO activity and biomass production of E.gracilis strain domesticated to 99 % CO₂ were 2.63 and 3.4 times higher, respectively, than those of wild-type strain. The chlorophyll a and b contents were 2.52 and 1.79 times higher, respectively, than those of wild-type strain. Superoxide dismutase and catalase activities of 99 % CO₂-domesticated strain increased to 1.24 and 6 times, which reduced peroxide damage under high carbon stress and resulted in lower apoptotic and necrotic rates of domesticated strain. Thus, this work provides valuable guidance for CO₂ fixation and adaptive evolution of E. gracilis in industrial flue gas.

Numerical simulation of vortex flow field generated in a novel nested-bottled photobioreactor to improve Arthrospira platensis growth

In this study, computational fluid dynamics were employed to examined clockwise and anticlockwise vortexes in the rising and down coming sections of novel nested-bottle photobioreactor. The radial velocity was increased by four times which significantly reduced dead zones compared to traditional PBR. The (NB-PBR) comprised of integrated bottles connected by curved tubes (d = 4 cm) that generated dominant vortices as the microalgae solution flows through each section (h = 10 cm). The (NB-PBR) was independent of the inner and outer sections which increased the mixing time and mass-transfer coefficient by 13.33 % and 42.9 %, respectively. Furthermore, the results indicated that the (NB-PBR) showed higher photosynthesis efficiency preventing self-shading and photo-inhibition, resulting in an increase in biomass yield and carbon dioxide fixation by 35 % and 35.9 %, respectively.

Trait drift in microalgae and applications for strain improvement

Microalgae are increasingly used to generate a wide range of commercial products, and there is growing evidence that microalgae-based products can be produced sustainably. However, industrial production of microalgal biomass is not as developed as other biomanufacturing platform technologies. In addition, results of bench-scale research often fail to translate to large-scale or mass production systems. This disconnect may result from trait drift and evolution occurring, through time, in response to unique drivers in each environment, such as cultivation regimes, weather, and pests. Moreover, outdoor and indoor cultivation of microalgae has the potential to impose negative selection pressures, which makes the maintenance of desired traits a challenge. In this context, this review sheds the light on our current understanding of trait drift and evolution in microalgae. We delineate the basics of phenotype plasticity and evolution, with a focus on how microalgae respond under various conditions. In addition, we review techniques that exploit phenotypic plasticity and evolution for strain improvement in view of industrial commercial applications, highlighting associated advantages and shortcomings. Finally, we suggest future research directions and recommendations to overcome unwanted trait drift and evolution in microalgae cultivation.

Optimization of microbial cell factories for astaxanthin production: Biosynthesis and regulations, engineering strategies and fermentation optimization strategies

The global market demand for natural astaxanthin is rapidly increasing owing to its safety, the potential health benefits, and the diverse applications in food and pharmaceutical industries. The major native producers of natural astaxanthin on industrial scale are the alga Haematococcus pluvialis and the yeast Xanthopyllomyces dendrorhous. However, the natural production via these native producers is facing challenges of limited yield and high cost of cultivation and extraction. Alternatively, astaxanthin production via metabolically engineered non-native microbial cell factories such as Escherichia coli, Saccharomyces cerevisiae and Yarrowia lipolytica is another promising strategy to overcome these limitations. In this review we summarize the recent scientific and biotechnological progresses on astaxanthin biosynthetic pathways, transcriptional regulations, the interrelation with lipid metabolism, engineering strategies as well as fermentation process control in major native and non-native astaxanthin producers. These progresses illuminate the prospects of producing astaxanthin by microbial cell factories on industrial scale.

Biofixation of Air Emissions and Biomass Valorization-Evaluation of Microalgal Biotechnology

This research appraised the simultaneous biofixation, that is not quite common in scientific literature, of carbon dioxide (CO₂) and nitric oxides (NO_x) by microalgae species Chlorella vulgaris, Haematococcus pluvialis, and Scenedesmus subspicatus. The experimental design was established by five treatments with gas concentrations between control-0.04% of CO₂, 5 to 15% of CO₂, and 30 to 100 ppm of NOx. Parameters such as pH, growth, productivity, lipids, protein, carbon/ nitrogen ratio, and astaxanthin were evaluated. For all species, the maximal growth and productivity were achieved with 5% of CO₂ and 30 ppm of NO_x. Regarding protein content, for all the three species, better results were obtained at higher concentrations of CO₂ and NOx. These results prove the microalgae capacity for CO₂ and NO_x biofixation and reuse of biomass as a source of high value-added products, such as lipids, proteins, and astaxanthin. These findings support the indication of these species for flue gas treatment process and use in biorefineries systems.

Bioprocess Strategy of Haematococcus lacustris for Biomass and Astaxanthin Production Keys to Commercialization: Perspective and Future Direction

Haematococcus lacustris (formerly called Haematococcus pluvialis) is regarded as the most promising microalgae for the production of natural astaxanthin, which is secondary metabolism used as a dietary supplement, also for cosmetic applications, due to its high anti-oxidant activity. Astaxanthin has a wide range of biological activities and high economic potential, and currently dominates the market in its synthetic form. Furthermore, because of the difficulty of bioprocess and the high cost of cultivation, astaxanthin extracted from this microalga is still expensive due to its low biomass and pigment productivities. Large-scale biomass production in biotechnological production necessitates the processing of a large number of cultures as well as the use of both indoor and outdoor systems, such as open pond raceway systems and photo-bioreactors (PBR). The photo-bioreactors systems are suitable for mass production because growth conditions can be controlled, and the risk of contamination can be reduced to a certain extent and under specific culture parameters. This review discusses current technologies being developed to improve cultivation and operation efficiency and profitability, as well as the effect of parameter factors associated with H. lacustris cultivation on biomass and astaxanthin bioproduction, and even strategies for increasing bioproduction and market potential for H. lacustris astaxanthin.

Regulation of Reactive Oxygen Species Promotes Growth and Carotenoid Production Under Autotrophic Conditions in Rhodobacter sphaeroides

Industrial demand for capture and utilization using microorganisms to reduce CO₂, a major cause of global warming, is significantly increasing. Rhodobacter sphaeroides is a suitable strain for the process of converting CO₂ into high-value materials because it can accept CO₂ and has various metabolic pathways. However, it has been mainly studied for heterotrophic growth that uses sugars and organic acids as carbon sources, not autotrophic growth. Here, we report that the regulation of reactive oxygen species is critical for growth when using CO₂ as a sole carbon source in R. sphaeroides. In general, the growth rate is much slower under autotrophic conditions compared to heterotrophic conditions. To improve this, we performed random mutagenesis using N-methyl-N’-nitro-N-nitrosoguanidine (NTG). As a result, we selected the YR-1 strain with a maximum specific growth rate (μ) 1.44 day^–1 in the early growth phase, which has a 110% faster growth rate compared to the wild-type. Based on the transcriptome analysis, it was confirmed that the growth was more sensitive to reactive oxygen species under autotrophic conditions. In the YR-1 mutant, the endogenous contents of H₂O₂ levels and oxidative damage were reduced by 33.3 and 42.7% in the cells, respectively. Furthermore, we measured that concentrations of carotenoids, which are important antioxidants. The total carotenoid is produced 9.63 g/L in the YR-1 mutant, suggesting that the production is 1.7-fold higher than wild-type. Taken together, our observations indicate that controlling ROS promotes cell growth and carotenoid production under autotrophic conditions.

Application of Microalgal Stress Responses in Industrial Microalgal Production Systems

Adaptive laboratory evolution (ALE) has been widely utilized as a tool for developing new biological and phenotypic functions to explore strain improvement for microalgal production. Specifically, ALE has been utilized to evolve strains to better adapt to defined conditions. It has become a new solution to improve the performance of strains in microalgae biotechnology. This review mainly summarizes the key results from recent microalgal ALE studies in industrial production. ALE designed for improving cell growth rate, product yield, environmental tolerance and wastewater treatment is discussed to exploit microalgae in various applications. Further development of ALE is proposed, to provide theoretical support for producing the high value-added products from microalgal production.

Using green alga Haematococcus pluvialis for astaxanthin and lipid co-production: Advances and outlook

Astaxanthin is one of the secondary carotenoids involved in mediating abiotic stress of microalgae. As an important antioxidant and nutraceutical compound, astaxanthin is widely applied in dietary supplements and cosmetic ingredients. However, most astaxanthin in the market is chemically synthesized, which are structurally heterogeneous and inefficient for biological uptake. Astaxanthin refinery from Haematococcus pluvialis is now a growing industrial sector. H. pluvialis can accumulate astaxanthin to ∼5% of dry weight. As productivity is a key metric to evaluate the production feasibility, understanding the biological mechanisms of astaxanthin accumulation is beneficial for further production optimization. In this review, the biosynthesis mechanism of astaxanthin and production strategies are summarized. The current research on enhancing astaxanthin accumulation and the potential joint-production of astaxanthin with lipids was also discussed. It is conceivable that with further improvement on the productivity of astaxanthin and by-products, the algal-derived astaxanthin would be more accessible to low-profit applications.

Augmented CO2 tolerance by expressing a single H+-pump enables microalgal valorization of industrial flue gas

Microalgae can accumulate various carbon-neutral products, but their real-world applications are hindered by their CO2 susceptibility. Herein, the transcriptomic changes in a model microalga, Chlamydomonas reinhardtii, in a high-CO2 milieu (20%) are evaluated. The primary toxicity mechanism consists of aberrantly low expression of plasma membrane H+-ATPases (PMAs) accompanied by intracellular acidification. Our results demonstrate that the expression of a universally expressible PMA in wild-type strains makes them capable of not only thriving in acidity levels that they usually cannot survive but also exhibiting 3.2-fold increased photoautotrophic production against high CO2 via maintenance of a higher cytoplasmic pH. A proof-of-concept experiment involving cultivation with toxic flue gas (13 vol% CO2, 20 ppm NOX, and 32 ppm SOX) shows that the production of CO2-based bioproducts by the strain is doubled compared with that by the wild-type, implying that this strategy potentially enables the microalgal valorization of CO2 in industrial exhaust.

Adaptive Laboratory Evolution of Microalgae: A Review of the Regulation of Growth, Stress Resistance, Metabolic Processes, and Biodegradation of Pollutants

Adaptive laboratory evolution (ALE) experiments are a serviceable method for the industrial utilization of the microalgae, which can improve the phenotype, performance, and stability of microalgae to obtain strains containing beneficial mutations. In this article, we reviewed the research into the microalgae ALE test and assessed the improvement of microalgae growth, tolerance, metabolism, and substrate utilization by ALE. In addition, the principles of ALE and the key factors of experimental design, as well as the issues and drawbacks of the microalgae ALE method were discussed. In general, improving the efficiency of ALE and verifying the stability of ALE resulting strains are the primary problems that need to be solved in future research, making it a promising method for the application of microalgae biotechnology.

Astaxanthin from Haematococcus pluvialis: processes, applications, and market

Astaxanthin is a xanthophyll carotenoid widely used in aquaculture and nutraceutical industries. Among natural sources, the microalga Haematococcus pluvialis is the non-genetically modified organism with the greatest capacity to accumulate astaxanthin. Therefore, it is important to understand emerging strategies in upstream and downstream processing of astaxanthin from this microalga. This review covers all aspects regarding the production and the market of natural astaxanthin from H. pluvialis. Astaxanthin biosynthesis, metabolic pathways, and nutritional metabolisms from the green vegetative motile to red hematocyst stage were reviewed in detail. Also, traditional and emerging techniques on biomass harvesting and astaxanthin recovery were presented and evaluated. Moreover, the global market of astaxanthin was discussed, and guidelines for sustainability increasing of the production chain of astaxanthin from H. pluvialis were highlighted, based on biorefinery models. This review can serve as a baseline on the current knowledge of H. pluvialis and encourage new researchers to enter this field of research.

Fecitrate converted from Fe2O3 particles in coal-fired flue gas promoted microalgal biomass and lipid productivities

In order to reutilize Fe₂O₃ particles in flue gas from coal-fired power plant as a ferrum nutrient for improving microalgae growth, Na-Citrate was proposed to chelate FeCl₃ derived from Fe₂O₃ and HCl reactions to promote biomass and lipid productivities of Chlorella PY-ZU1. Fe-Citrate gave much higher biomass and lipid productivities than FeCl₃, Fe-EDTA, Fe-DTPA and Fe-HEDTA, because organic chelator prevented Fe³⁺ from depositing, lower stability constant resulted in easier dissociation of ferric chelate, smaller chelate facilitated Fe²⁺ (reduced from Fe³⁺) transportation through cell membranes. The biomass growth and photosynthetic capacity of Chlorella PY-ZU1 cultivated with Fe-Citrate (converted from Fe₂O₃ particles) medium were similar to those with commercial ferric ammonium citrate medium. The biomass and lipid productivities of Chlorella PY-ZU1 cultivated with 5 mg L^-1 Fe-Citrate medium were 1.30 and 1.72 times, respectively, higher than those with FeCl₃ growth medium.

Simultaneous promotion of photosynthesis and astaxanthin accumulation during two stages of Haematococcus pluvialis with ammonium ferric citrate

To simultaneously promote biomass yield and astaxanthin content of Haematococcus pluvialis, ammonium ferric citrate (AFC) was employed to stimulate light harvest in photosynthesis during the green stage and oxidation induction in astaxanthin accumulation during the red stage. AFC not only improved chlorophyll synthesis by 22.5% to provide more electrochemical potential energy in the green stage, but also alleviated photosystem II damage to maintain a high level of effective quantum yield by enhancing carotenoid production. The citrate derived from AFC stimulated acetyl-CoA and NADPH production through citric acid cycle and transaminase cycle during the red stage, resulting in an increased lipid content by 1.77-fold. The astaxanthin content in H. pluvialis cells cultivated with 5 μM AFC was 12.5% higher than that without AFC, which was attributed to severe oxidative stress caused by AFC through Haber-Weiss reaction. These results provided a new approach to reduce emission of greenhouse gasses with producing high-value products.

An Integrated Strategy for Nutraceuticals from Haematoccus pluvialis: From Cultivation to Extraction

The aim of this study was to develop an effective integrated cultivation system for Haematococcus pluvialis as a source of bioactive compounds such as astaxanthin, lutein, proteins, and fatty acids (FAs). The Chlorophyta H. pluvialis was cultivated in a vertical bubble column photobioreactor (VBC-PBR) under batch mode, allowing switching from green to red phase for astaxanthin induction. The combined effect of light intensity and nutrients on bioactive compound formation was investigated. Results showed that growth under lower nutrients availability and light intensity led to a higher concentration of biomass. Growth under high light intensity with an appropriate concentration of nitrate, sulfate, phosphate and magnesium led to ~85% and ~58% higher production of total carotenoids and fatty acids, respectively. Under high stress conditions, ~90% nitrate and phosphate consumption were observed.

Using polyethylene glycol to promote Nannochloropsis oceanica growth with 15 vol% CO2

CO₂ capture with microalgae has been put forward in response to global concern on greenhouse gas emission. However, the short residence time and slow diffusion of CO₂ in water limits the growth of microalgae. In order to improve CO₂ transfer from gas phase to liquid phase and utilization by algal cells, polyethylene glycol 200 (PEG 200) was used as CO₂ absorbent to promote growth of Nannochloropsis oceanica with the bubbling of 15 vol% CO₂. Total inorganic carbon (TIC) absorbed in culture medium remained constant at 5.6 mM when 15 vol% CO₂ was bubbled continuously. PEG 200 in the medium provided additional CO₂ absorption from 0.6 to 4.8 mM when PEG 200 concentration increased from 0.5 to 4 mM. The specific growth rate of N. oceanica reached the maximum (1.41 d^-1) with 1 mM PEG 200 in culture medium, which was 21.5% higher than the specific growth rate without PEG 200. About 79% of the increase in biomass was attributed to the increased TIC with more CO₂ dissolution in culture medium because of PEG 200, and about 21% was attributed to PEG 200 itself utilized as an organic carbon source. In conclusion, PEG 200 as a CO₂ absorbent can effectively capture flue-gas CO₂ for algal growth.

Calcinated MIL-100(Fe) as a CO2 adsorbent to promote biomass productivity of Arthrospira platensis cells

In order to solve the problems of short residence time and low diffusion of CO₂ gas in microalgal solution, calcinated metal-organic framework MIL-100(Fe) were first used as CO₂ adsorbents to promote the growth of Arthrospira platensis cells by increasing carbon fixation. The adsorbent (MIL-100(Fe)-4 h) containing unsaturated metal sites, improved the conversion of CO₂ to dissolved inorganic carbon by 52.3% and concentration of HCO₃^- by 20.0% in culture medium, as compared to the medium without CO₂ adsorbent added. The increased HCO₃^- concentration facilitated carboxysome accumulation (increased to 21.7 times) to activate the photosynthetic Calvin cycle in Arthrospira cells. The increased cell growth rate promoted cell volume by 132% and knot length by 102%, while the fractal dimension of the cell surface decreased by 13.5%. The biomass productivity of Arthrospira cells cultivated with the CO₂ adsorbent MIL-100(Fe)-4 h remarkably increased by 81.9%.

Enhanced biomass productivity of Arthrospira platensis using zeolitic imidazolate framework-8 as carbon dioxide adsorbents

In order to improve CO₂ diffusion in algae solution and conversion into dissolved HCO₃^-, zeolitic imidazolate framework-8 (ZIF-8) with zinc cores as unsaturated metal sites was first used as CO₂ adsorbents. Flue gas CO₂ from coal-chemical industry can be adsorbed and can be made available throughout cultivation to promote biomass productivity of Arthrospira platensis. The ZIF-8 adsorbent with particle size of 719 nm performed the largest pore area of 351.8 m²/g, which promoted CO₂ conversion into HCO₃^- by 72.9% compared to control condition without ZIF-8. The increased HCO₃^- concentration enhanced thylakoid membrane proportion in cell cross-sectional area by 1.3 times to 78.3%, which resulted in enhancement of photosynthesis in A. platensis cells. Relative electron transport rate increased by 9.4% accordingly, which was attributed to the improvement of chlorophyll a concentration by 110%. The biomass productivity using ZIF-8 adsorbent with particle size of 719 nm markedly increased by 64.0%.

Modification and improvement of microalgae strains for strengthening CO2 fixation from coal-fired flue gas in power plants

Biological CO₂ capture using microalgae is a promising new method for reducing CO₂ emission of coal-fired flue gas. The strain of microalgae used in this process plays a vital role in determining the rate of CO₂ fixation and characteristics of biomass production. High requirements are put forward for algae strains due to high CO₂ concentration and diverse pollutants in flue gas. CO₂ can directly diffuse into the cytoplasm of cells by extra- and intracellular CO₂ osmotic pressure under high CO₂ concentrations. The flue gas pollutants, such as SO_x, NO_x and fly ashes, have negative effects on the growth of microalgae. This work reviewed the state-of-the-art advances on microalgae strains used for CO₂ fixation, focusing on the modification and improvement of strains that are used for coal-fired flue gas. Methods such as genetic engineering, random mutagenesis, and adaptive evolution have the potential to facilitate photosynthesis, improve growth rate and reduce CO₂ emission.

Deesterification of astaxanthin and intermediate esters from Haematococcus pluvialis subjected to stress

Haematococcus pluvialis is the richest biological source of astaxanthin under unfavorable growing conditions. Many reports have discussed the optimal astaxanthin extraction methods. Free-astaxanthin could be still hindered by microalgae extracts composition or by prolonged extraction times. In this study we evaluated the effect of enzymolysis and saponification deesterification processes of astaxanthin and its carotenoid precursors under high irradiance and nitrogen deprivation stress time conditions. Results showed that cholesterol esterase facilitated astaxanthin deesterification (975.65 μg mg^-1 DW) while saponification positively affected zeaxanthin (1038.68 μg mg^-1 DW).

A rapid inoculation method for microalgae biofilm cultivation based on microalgae-microalgae co-flocculation and zeta-potential adjustment

Due to the small size, similar density to water, cells inoculating onto the solid carrier is a major challenge for microalgae biofilm cultivation. To reduce biofilm inoculation time, A. falcatus with long stripe were chosen as the bond linking with the main microalgae cells forming microalgae-microalgae co-flocculation by bridging and twining. The optimal matching species were S. obliquus and A. falcatus with the volume ratio of 4-1. By changing the zeta-potential of the microalgae-microalgae co-flocculation to positive and negative through pH regulating, the inoculation time was significantly shorted from 4 h to 1.5 min due to the charge neutralization. Fortunately, the added A. falcatus and pH regulation has no negative effects on biofilm growth. Inversely, the porous microstructure of microalgae-microalgae co-flocculation improve the transfer efficiency of nutrients, resulting a 90.15% increase on biomass productivity (229.15 g m^-2) comparing to pure microalgae species.

Microalgae for the production of lipid and carotenoids: a review with focus on stress regulation and adaptation

Microalgae have drawn great attention as promising sustainable source of lipids and carotenoids. Their lipid and carotenoids accumulation machinery can be trigged by the stress conditions such as nutrient limitation or exposure to the damaging physical factors. However, stressful conditions often adversely affect microalgal growth and cause oxidative damage to the cells, which can eventually reduce the yield of the desired products. To overcome these limitations, two-stage cultivation strategies and supplementation of growth-promoting agents have traditionally been utilized, but developing new highly adapted strains is theoretically the simplest strategy. In addition to genetic engineering, adaptive laboratory evolution (ALE) is frequently used to develop beneficial phenotypes in industrial microorganisms during long-term selection under specific stress conditions. In recent years, many studies have gradually introduced ALE as a powerful tool to improve the biological properties of microalgae, especially for improving the production of lipid and carotenoids. In this review, strategies for the manipulation of stress in microalgal lipids and carotenoids production are summarized and discussed. Furthermore, this review summarizes the overall state of ALE technology, including available selection pressures, methods, and their applications in microalgae for the improved production of lipids and carotenoids.

Conversion of stranded waste-stream carbon and nutrients into value-added products via metabolically coupled binary heterotroph-photoautotroph system

Growth of heterotrophic bacterium Bacillus subtilis was metabolically coupled with the photosynthetic activity of an astaxanthin-producing alga Haematococcus pluvialis for conversion of starch-containing waste stream into carotenoid-enriched biomass. The H. pluvialis accounted for 63% of the produced co-culture biomass of 2.2 g/L. Importantly, the binary system requires neither exogenous supply of gaseous substrates nor application of energy-intensive mass transfer technologies due to in-situ exchange in CO₂ and O₂. The maximum reduction in COD, total nitrogen and phosphorus reached 65%, 55% and 30%, respectively. Conducted techno-economic assessment suggested that the astaxanthin-rich biomass may potentially offset the costs of waste treatment, and, with specific productivity enhancements (induction of astaxanthin to 2% and increase H. pluvialis fraction to 80%), provide and additional revenue stream. The outcome of this study demonstrates a successful proof-of-principle for conversion of waste carbon and nutrients into value-added products through metabolic coupling of heterotrophic and phototrophic metabolisms.

High-value biomass from microalgae production platforms: strategies and progress based on carbon metabolism and energy conversion

Microalgae are capable of producing sustainable bioproducts and biofuels by using carbon dioxide or other carbon substances in various cultivation modes. It is of great significance to exploit microalgae for the economical viability of biofuels and the revenues from high-value bioproducts. However, the industrial performance of microalgae is still challenged with potential conflict between cost of microalgae cultivation and revenues from them, which is mainly ascribed to the lack of comprehensive understanding of carbon metabolism and energy conversion. In this review, we provide an overview of the recent advances in carbon and energy fluxes of light-dependent reaction, Calvin-Benson-Bassham cycle, tricarboxylic acid cycle, glycolysis pathway and processes of product biosynthesis in microalgae, with focus on the increased photosynthetic and carbon efficiencies. Recent strategies for the enhanced production of bioproducts and biofuels from microalgae are discussed in detail. Approaches to alter microbial physiology by controlling light, nutrient and other environmental conditions have the advantages of increasing biomass concentration and product yield through the efficient carbon conversion. Engineering strategies by regulating carbon partitioning and energy route are capable of improving the efficiencies of photosynthesis and carbon conversion, which consequently realize high-value biomass. The coordination of carbon and energy fluxes is emerging as the potential strategy to increase efficiency of carbon fixation and product biosynthesis. To achieve more desirable high-value products, coordination of multi-stage cultivation with engineering and stress-based strategies occupies significant positions in a long term.

In vivo kinetics of lipids and astaxanthin evolution in Haematococcus pluvialis mutant under 15% CO2 using Raman microspectroscopy

In vivo spatiotemporal dynamics of lipids and astaxanthin evolution in Haematococcus pluvialis mutant induced with 15% CO₂ and high light intensity were monitored with high spatial resolution in a non-destructive and label-free manner using single-cell Raman imaging. Astaxanthin intensity increased by 3.5 times within 12h under 15% CO₂, and the accumulation rate was 5.8 times higher than that under air. Lipids intensity under 15% CO₂ was 27% higher than that under air. The lipids initially concentrated in chloroplast under 15% CO₂ due to an increase of directly photosynthetic fatty acid, which was different from the whole-cell dispersed lipids under air. Astaxanthin produced in chloroplast first accumulated around nucleus and then spread in cytoplasmic lipids under both air and 15% CO₂. The calculation results of kinetic models for lipids and astaxanthin evolutions showed that accumulation rate of lipids was much higher than that of astaxanthin in cells.

Simultaneous enhancement of Chlorella vulgaris growth and lipid accumulation through the synergy effect between light and nitrate in a planar waveguide flat-plate photobioreactor

Interval between adjacent planar waveguides and light intensity emitted from waveguide surface were the primary two factors affecting light distribution characteristics in the planar waveguide flat-plate photobioreactor (PW-PBR). In this paper, the synergy effect between light and nitrate in the PW-PBR was realized to simultaneously enhance microalgae growth and lipid accumulation. Under an interval of 10mm between adjacent planar waveguides, 100% of microalgae cells in regions between adjacent waveguides could be illuminated. Chlorella vulgaris growth and lipid accumulation were synchronously elevated as light intensities emitted from planar waveguide surface increasing. With an identical initial nitrate concentration of 18mM, the maximum lipid content (41.66% in dry biomass) and lipid yield (2200.25mgL^-1) were attained under 560μmolm^-2s^-1, which were 86.82% and 133.56% higher relative to those obtained under 160μmolm^-2s^-1, respectively. The PW-PBR provides a promising way for microalgae lipid production.

Transcriptome-based analysis on carbon metabolism of Haematococcus pluvialis mutant under 15% CO2

To elucidate the mechanism underlying the enhanced growth rate in the Haematococcus pluvialis mutated with ⁶⁰Co-γ rays and domesticated with 15% CO₂, transcriptome sequencing was conducted to clarify the carbon metabolic pathways of mutant cells. The CO₂ fixation rate of mutant cells increased to 2.57gL^-1d^-1 under 15% CO₂ due to the enhanced photosynthesis, carbon fixation, glycolysis pathways. The upregulation of PetH, ATPF0A and PetJ related to photosynthetic electron transport, ATP synthase and NADPH generation promoted the photosynthesis. The upregulation of genes related to Calvin cycle and ppdK promoted carbon fixation in both C3 and C4 photosynthetic pathways. The reallocation of carbon was also enhanced under 15% CO₂. The 19-, 14- and 3.5-fold upregulation of FBA, TPI and PK genes, respectively, remarkably promoted the glycolysis pathways. This accelerated the conversion of photosynthetic carbon to pyruvate, which was an essential precursor for astaxanthin and lipids biosynthesis.

Effects of CO2 enrichment on primary photochemistry, growth and astaxanthin accumulation in the chlorophyte Haematococcus pluvialis

The atmospheric CO₂ level is limiting for growth of phototrophic organisms such as microalgae, so CO₂ enrichment boosts the growth and photosynthesis of microalgal cultures. Still, excessive CO₂ injection might inhibit photosynthesis of microalgae. We investigated the effect of continuous sparging of the cultures of Haematococcus pluvialis BM 1 (IPPAS H-2018) (Chlorophyceae), the richest natural source of the value-added pigment astaxanthin. H. pluvialis cultures with CO₂-enriched air-gas mixtures (with CO₂ level from the atmospheric to 20%) on growth and astaxanthin accumulation in the microalga. Special attention was paid to photosynthetic activity and non-photochemical excited chlorophyll states quenching in the microalgal cells, which was monitored via chlorophyll fluorescence analysis. We also report on the capability of CO₂ capture by H. pluvialis derived from direct measurements of its elemental carbon content. The beneficial effect of the moderately high (5%) CO₂ levels on the culture growth and astaxanthin accumulation under stress results in a higher overall astaxanthin productivity. However, increase of the CO₂ level to 10% or 20% was deteriorative for growth, photosynthesis and carbon assimilation. The results support the possibility of combining a traditional two-stage H. pluvialis cultivation with CO₂ bio-capture although a dilution of the flue gas before its injection is required.

Transcriptome sequencing and metabolic pathways of astaxanthin accumulated in Haematococcus pluvialis mutant under 15% CO2

Transcriptome sequencing and annotation was performed on Haematococcus pluvialis mutant red cells induced with high light under 15% CO₂ to demonstrate why astaxanthin yield of the mutant was 1.7 times higher than that of a wild strain. It was found that 56% of 1947 differentially expressed genes were upregulated in mutant cells. Most significant differences were found in unigenes related to photosynthesis, carotenoid biosynthesis and fatty acid biosynthesis pathways. The pyruvate kinase increased by 3.5-fold in mutant cells. Thus, more pyruvate, which was beneficial to carotenoids and fatty acid biosynthesis, was generated. Phytoene synthase, zeta-carotene desaturase, lycopene beta-cyclase involved in β-carotene biosynthesis in mutant cells were upregulated by 10.4-, 4.4-, and 5.8-fold, respectively. Beta-carotene 3-hydroxylase catalyzing conversion of β-carotene into astaxanthin was upregulated by 18.4-fold. The fatty acid biosynthesis was promoted because of the upregulation of acetyl-CoA synthetase and acetyl-CoA carboxylase, thus increasing astaxanthin esterification and accumulation in mutant cells.