Ultrasound as an alternative technology to extract carotenoids and lipids from Heterochlorella luteoviridis

Simultaneous analysis of 7 key mevalonate pathway intermediates using liquid chromatography-orbitrap mass spectrometry

The mevalonate (MVA) pathway is a central metabolic route that converts mevalonate into isoprenoids, which are of crucial significance in various cellular processes. As no systematic approach had been developed and validated for the simultaneous estimation of these intermediate metabolites within the MVA pathway. In this research, a method was developed for the concurrent determination of 7 key intermediate metabolites in the MVA pathway based on ultra-high performance liquid chromatography (UPLC) coupled with a quadrupole/electrostatic field orbitrap high-resolution mass spectrometry (HRMS). The developed UPLC-HRMS method based on the hydrophilic interaction liquid chromatography (HILIC) separation mode was successfully applied to the quantitative analysis of relevant key intermediate metabolites in wild type Escherichia coli (E. coli) BL21 (DE3) and the recombinant E. coli BL21 (DE3) system constructed by introducing all the genes of the MVA pathway into the strain. The above results can offer a reference for further studies on the MVA pathway.

Green extraction cascade of UV-absorbing compounds, alginate, and fucoidan from Sargassum using ethanol and natural deep eutectic solvents

The objective of this study was to evaluate Caribbean Mexican seaweed as a raw material for the production of fucoidans, alginates, and bioactive extracts with antioxidant activity, total flavonoid content, total phenolic content, and UV absorbance. Extractions were first performed using varying ethanol concentrations and maceration times, with the optimal treatment selected based on its superior antioxidant activity, flavonoid and phenolic contents, and UV absorbance. The solid fraction from this treatment was then subjected to extraction using green solvents, specifically natural deep eutectic solvents (NADESs) and ultrasound-assisted extraction (UAE), to isolate alginate and fucoidan. The green extraction cascade enables the recovery of multiple value-added products from each fraction, showcasing both versatility and sustainability. The new DES combination yielded a high amount of crude fucoidan (0.4103 ± 0.0042 g g⁻1 dry algae), exceeding the yields reported in previous studies. FTIR-ATR analysis confirmed that the extracted fucoidan structure was consistent with that of Sargassum spp., although further purification and characterization are needed to determine whether its known bioactive properties are preserved. All treatments exhibited strong UV-B absorbance, highlighting the potential of Sargassum extracts as sunscreen filters, with polyphenolic compounds being the primary contributor to UV absorption. Additionally, UV-A absorbance was correlated with flavonoid and carotenoid content, particularly in 50 % ethanol extracts. Future research should explore the potential of Sargassum for sunscreen applications and polysaccharide extraction, offering a sustainable solution to the environmental and economic challenges posed by annual Sargassum blooms in Mexico.

Microalgae-derived biolubricants: Challenges and opportunities

Lubricants are indispensable in the modern economy for controlling friction and wear across many industries. Traditional lubricants are derived from petroleum crude and can cause significant ecological impact if released into the environment. Microalgae have emerged as a potential alternative to petroleum crude for producing renewable and environmentally friendly biolubricants. This review systematically assesses recent developments in microalgal-based biolubricant production, including tribological performance, microalgae selection, cultivation, harvesting, lipid and polysaccharide extraction and conversion to biolubricants, and market development. Compared to petroleum-based lubricants in terms of tribological properties, biolubricants are compatible with most emerging applications, such as electric vehicles and wind turbines. Nevertheless, they are less thermally and chemically stable, thus, may not be suitable for some traditional applications such as internal combustion engines. Literature data corroborated in this study reveals an urgent need for further research to scale up microalgae production and lower the cost of biomass harvesting. While technologies for converting microalgae-derived lipids to biolubricants appear to be well established, additional work is necessary to also utilize polysaccharides as another key ingredient for producing biolubricants, especially for low-temperature applications. Extraction methods are well established but further research is also needed to reduce the ecological impact, especially to utilize green solvents and reduce solvent consumption. Additionally, future research should delve into the use of nanoparticles as effective additives to obtain microalgae-based biolubricants with superior properties. Finally, it is essential to standardize the labeling system of biolubricants to establish a global market.

In Rhodotorula mucilaginosa, active oxidative metabolism increases carotenoids to inactivate excess reactive oxygen species

Carotenoids produced by bacteria, yeasts, algae and plants inactivate Free Radicals (FR). However, FR may inactivate carotenoids and even turn them into free radicals. Oxidative metabolism is a source of the highly motile Reactive Oxygen Species (ROS). To evaluate carotenoid interactions with ROS, the yeast Rhodotorula mucilaginosa was grown in dextrose (YPD), a fermentative substrate where low rates of oxygen consumption and low carotenoid expression were observed, or in lactate (YPLac), a mitochondrial oxidative-phosphorylation (OxPhos) substrate, which supports high respiratory activity and carotenoid production. ROS were high in YPLac-grown cells and these were unmasked by the carotenoid production-inhibitor diphenylamine (DPA). In contrast, in YPD-grown cells ROS were almost absent. It is proposed that YPLac cells are under oxidative stress. In addition, YPLac-grown cells were more sensitive than YPD-grown cells to menadione (MD), a FR-releasing agent. To test whether carotenoids from cells grown in YPLac had been modified by ROS, carotenoids from each, YPD- and YPLac-grown cells were isolated and added back to cells, evaluating protection from MD. Remarkably, carotenoids extracted from cells grown in YPLac medium inhibited growth, while in contrast extracts from YPD-grown cells were innocuous or mildly protective. Results suggest that carotenoid-synthesis in YPLac-cells is a response to OxPhos-produced ROS. However, upon reacting with FR, carotenoids themselves may be inactivated or even become prooxidant themselves.

Ultrasound-based strategies for the recovery of microalgal carotenoids: Insights from green extraction methods to UV/MS-based identification

Carotenoids, versatile natural pigments with numerous health benefits, face environmental concerns associated with conventional petrochemical-based extraction methods and limitations of their synthetic equivalents. In this context, this study aims to introduce eco-friendly approaches using ultrasound-based strategies (probe and bath) for the extraction of carotenoids from microalgae, initially focusing on Microchloropsis gaditana and subsequently evaluating the versatility of the method by applying it to other microalgae species of interest (Tisochrysis lutea, Porphyridium cruentum, and Phaeodactylum tricornutum) and defatted microalgal residues. Among the approaches evaluated, the 5-min ultrasonic probe system with ethanol showed comparable carotenoid recovery efficiency to the reference method (agitation, 24 h, acetone) (9.4 ± 2.5 and 9.6 ± 3.2 mg g-1 carotenoids per dry biomass, for the green and the reference method, respectively). Moreover, the method's sustainability was demonstrated using the AGREEprep™ software (scored 0.62 out of 1), compared to the traditional method (0.22 out of 1). The developed method yielded high carotenoid contents across species with diverse cell wall compositions (3.1 ± 0.2, 2.1 ± 0.3, and 4.1 ± 0.1 mg g-1 carotenoid per dry biomass for T. lutea, P. cruentum, and P. tricornutum, respectively). Moreover, the application of the method to defatted biomass showed potential for microalgal valorization with carotenoid recovery rates of 41 %, 60 %, 61 %, and 100 % for M.gaditana, P. tricornutum, T. lutea, and P. cruentum, compared to the original biomass, respectively. Furthermore, by using high-performance liquid chromatography with a diode array detector (HPLC-DAD) and high-resolution mass spectrometry (HRMS), we reported the carotenoid and chlorophyll profiles of the different microalgae and evaluated the impact of the eco-friendly methods. The carotenoid and chlorophyll profiles varied depending on the species, biomass, and method used. In summary, this study advances a green extraction method with improved environmental sustainability and shorter extraction time, underscoring the potential of this approach as a valuable alternative for the extraction of microalgal pigments.

Optimization of the Parameters Influencing the Antioxidant Activity and Concentration of Carotenoids Extracted from Pumpkin Peel Using a Central Composite Design

It has been discovered that the peel of a pumpkin (Cucurbita maxima), regarded as a waste product of pumpkin processing, has significant amounts of carotenoids and other antioxidants. This study aims to identify the most effective extraction parameters for an ultrasonic-assisted extraction method to extract the total carotenoids (TCs) and assess the antioxidant activity (AA) of pumpkin peel. To determine the effects of the extraction time, temperature, and material-to-solvent ratio on the recovery of TCs and AA, a response surface methodology utilizing the central composite design (CCD) was used. The extraction temperature (6.25-98.75 °C), extraction duration (13.98-128.98 min), and solvent ratio (0.23-50.23 mL) were the variables studied in the coded form of the experimental plan. The carotenoid concentration varied from 0.53 to 1.06 mg/g DW, while the AA varied from 0.34 to 7.28 µM TE/g DW. The findings indicated that the optimal extraction parameters were an 80 °C temperature, a 10 mL solvent ratio, and a 100 min extraction time. The study confirmed that the optimum extraction conditions resulted in an experimental TC yield of 0.97 mg/g DW and an AA of 7.25 µM TE/g DW. Overall, it should be emphasized that the extraction process can be enhanced by setting the operating factors to maximize the model responses.

Green Solvents for Extraction of Natural Food Colorants from Plants: Selectivity and Stability Issues

Consumers associate the color of food with its freshness and quality. More and more attention is being paid to natural colorants that bring additional health benefits to humans. Such natural substances are the carotenoids (yellow to orange), the anthocyanins (red to blue), and the betalains (red and yellow), which are very sensitive to exposure to light, air, high temperatures, and chemicals. Stability and diversity in terms of color can be optimized by using environmentally friendly and selective extraction processes that provide a balance between efficacy, safety, and stability of the resulting extracts. Green solvents like water, supercritical fluids, natural deep eutectic solvents, and ionic liquids are the most proper green solvents when combined with different extraction techniques like maceration, supercritical extraction, and ultrasound-assisted or microwave-assisted extraction. The choice of the right extracting agent is crucial for the selectivity of the extraction method and the stability of the prepared colorant. The present work reviews the green solvents used for the extraction of natural food colorants from plants and focuses on the issues related to the selectivity and stability of the products extracted.

Shade of Innovative Food Processing Techniques: Potential Inducing Factors of Lipid Oxidation

With increasing environmental awareness and consumer demand for high-quality food products, industries are strongly required for technical innovations. The use of various emerging techniques in food processing indeed brings many economic and environmental benefits compared to conventional processes. However, lipid oxidation induced by some "innovative" processes is often "an inconvenient truth", which is scarcely mentioned in most studies but should not be ignored for the further improvement and optimization of existing processes. Lipid oxidation poses a risk to consumer health, as a result of the possible ingestion of secondary oxidation products. From this point of view, this review summarizes the advance of lipid oxidation mechanism studies and mainly discloses the shade of innovative food processing concerning lipid degradation. Sections involving a revisit of classic three-stage chain reaction, the advances of polar paradox and cut-off theories, and potential lipid oxidation factors from emerging techniques are described, which might help in developing more robust guidelines to ensure a good practice of these innovative food processing techniques in future.

Ultrasound application for the decontamination of roselle (Hibiscus sabdariffa L.) seeds: Influence on fungal inhibition and seed quality

Seed decay is a major problem caused by pathogens that adversely affect seed yield and quality in agricultural production. Herein, the effect of 28 KHz ultrasound treatment for 20, 40 and 60 min and 1.5% sodium hypochlorite solution for 20 min was assessed for the decontamination of roselle (Hibiscus sabdariffa L.) seeds. In addition, seed germination indices, seedling growth traits, total phenolic content and the activity of defense-related enzymes, viz. peroxidase, superoxide dismutase, catalase and malondialdehyde were measured in the treated seeds. An isolate of Fusarium solani was obtained from roselle seeds and identified as the causal agent of roselle seed rot based on morphological and molecular characteristics. After six days of seed storage, the microbial infection caused the highest seed rot in the control seeds on the average of 56.67%, whereas ultrasound treatment for 60 min could remarkably reduce the seed decay by 3.33%. At the end of seed storage, the fungal load showed the highest (7.72 Log CFU ml-1) and lowest (6.99 Log CFU ml-1) rates in the control and ultrasound treatment for 60 min, respectively. Total phenolic content was significantly increased in ultrasound treatment for 60 min compared to control and sodium hypochlorite treatments. Moreover, the activity of peroxidase, superoxide dismutase and catalase was noticeably improved in ultrasound treatment for 60 min. Furthermore, ultrasound treatment did not show any adverse effects on seed germination indices and seedling growth traits of the roselle plants. Overall, ultrasound treatment for 60 min could effectively decrease roselle seed decay and the fungal load without changing seed and seedling quality.

Green extraction of carotenoids from apricot flesh by ultrasound assisted corn oil extraction: Optimization, identification, and application

The valorization of waste apricot flesh (WAF) can solve environmental and economic problems, and also meets the demand for natural pigments. Therefore, the aim of this paper was to recover carotenoids from WAF, to determine the type and content of carotenoids in the extracts and to explore the potential of the extracts for food industry applications. The extraction conditions were optimized. The total carotenoids content (TCC) was 42.75 mg/100 g dried weight under the optimized conditions: Time: 60 min, Temperature: 41.53℃, Power: 200 W, Liquid to solid (LS) ratio: 0.10 g/mL. The highest content of carotenoids in the corn oil extracts (COE) was phytoene. Color of COE under high temperature was investigated. Carotenoids in the COE were degraded at high temperatures. The a* of fries fried by COE was 7.31 times higher than that of corn oil. This study provides guidance for the green recovery of carotenoids and valorization of WAF.

Progress and Prospective of the Industrial Development and Applications of Eco-Friendly Colorants: An Insight into Environmental Impact and Sustainability Issues

Color is the prime feature directly associated with the consumer's attraction and choice of their food. The flavor, safety, and nutritional value of any food product are directly associated with the food color. Natural and synthetic colorants (dyes and pigments) have diversified applications in various sectors such as food, feed, pharmaceutical, textiles, cosmetics, and others. Concerning the food industry, different types of natural and synthetic colorants are available in the market. Synthetic food colorants have gained popularity as they are highly stable and cheaply available. Consumers worldwide prefer delightful foodstuffs but are more concerned about the safety of the food. After its disposal, the colloidal particles present in the synthetic colorants do not allow sunlight to penetrate aquatic bodies. This causes a foul smell and turbidity formation and gives a bad appearance. Furthermore, different studies carried out previously have presented the toxicological, carcinogenic effects, hypersensitivity reactions, and behavioral changes linked to the usage of synthetic colorants. Natural food colorings, however, have nutraceutical qualities that are valuable to human health such as curcumin extracted from turmeric and beta-carotene extracted from carrots. In addition, natural colorants have beneficial properties such as excellent antioxidant properties, antimutagenic, anti-inflammatory, antineoplastic, and antiarthritic effects. This review summarizes the sources of natural and synthetic colorants, their production rate, demand, extraction, and characterization of food colorants, their industrial applications, environmental impact, challenges in the sustainable utilization of natural colorants, and their prospects.

Robust solvatochromic carbon quantum dots for selective detection of water and Sn4+ and specific lipid imaging

Developing carbon quantum dots (CQDs) with the solvatochromic effect and exploring multifunctional applications remains challenging. Herein, robust solvatochromic carbon quantum dots (RS-CQDs) with emission shift up to ∼62 nm from yellow to red was fabricated by the hydrothermal method. The RS-CQDs was used to detect water and Sn⁴⁺ in the linear ranges and limits of detection of 2.0-97.6% and 0.14% and 6.24-53.18 μM and 66.3 nM, respectively, and was further applied to determine Sn⁴⁺ in practical water samples with satisfactory results. In addition, RS-CQDs exhibited bright red emission in oil media with a 9.7-fold increase in fluorescence relative to aqueous media, making them a wash-free probe for specifically staining lipids. Compared to the commercial lipid marker BODIPY 493/503, the RS-CQDs-based probe has significant advantages, such as longer emission, larger Stokes shift, and better photostability, ensuring that RS-CQDs-based marker can implement real-time and wash-free monitoring and imaging of lipids in living cells, liver tissues, zebrafish embryos, and zebrafish larvae. This study provides a novel research direction for the development of metal-doped CQDs by demonstrating RS-CQDs as the viability of fluorescence probes for water and Sn⁴⁺ detection and the efficiency of RS-CQDs as a fluorescent marker for lipid imaging.

Technological advances in the production of carotenoids and their applications- A critical review

Carotenoids are naturally occurring pigments that are widely distributed in algae, fungi, bacteria, and plants. Carotenoids play a significant role in the food, feed, cosmetic, nutraceutical, and pharmaceutical industries. These pigments are effectively considered as a health-promoting compounds, which are widely used in our daily diet to reduce the risk of chronic diseases such as cardiovascular diseases, cancer, acute lung injury, cataracts, neural disorders, etc. In this context, this review paper demonstrates the synthesis of carotenoids and their potential application in the food and pharmaceutical industries. However, the demand for carotenoid production is increasing overtime, and the extraction and production are expensive and technically challenging. The recent developments in carotenoid biosynthesis, and key challenges, bottlenecks, and future perspectives were also discussed to enhance the circular bioeconomy.

Advances in the synthesis of three typical tetraterpenoids including β-carotene, lycopene and astaxanthin

Carotenoids are natural pigments that widely exist in nature. Due to their excellent antioxidant, anticancer and anti-inflammatory properties, carotenoids are commonly used in food, medicine, cosmetic and other fields. At present, natural carotenoids are mainly extracted from plants, algae and microorganisms. With the rapid development of metabolic engineering and molecular biology as well as the continuous in-depth study of carotenoids synthesis pathways, industrial microorganisms have showed promising applications in the synthesis of carotenoids. In this review, we introduced the properties of several carotenoids and their biosynthetic metabolism process. Then, the microorganisms synthesizing carotenoids through the natural and non-natural pathways and the extraction methods of carotenoids were summarized and compared. Meanwhile, the influence of substrates on the carotenoids production was also listed. The methods and strategies for achieving high carotenoid production are categorized to help with future research.

Factorial Optimization of Ultrasound-Assisted Extraction of Phycocyanin from Synechocystis salina: Towards a Biorefinery Approach

PC is a bioactive and colorant compound widely sought in the food, nutraceutical and cosmetic industries, and one of the most important pigments produced by Synechocystis salina. However, the general extraction process is usually time-consuming and expensive, with low extraction yields—thus compromising a feasible and sustainable bioprocess. Hence, new extraction technologies (e.g., ultrasound assisted-extraction or UAE) emerged in the latest years may serve as a key step to make the overall bioprocess more competitive. Therefore, this study aimed at optimizing the yields of phycocyanin (PC) rich-extracts of S. salina by resorting to UAE; in attempts to explore this process in a more economically feasible way; valorization of the remaining cyanobacterial biomass, via extraction of other bioactive pigments and antioxidants, was tackled within a biorefinery perspective. A two-stage extraction (using ethanol and water) was thus performed (because it favors PC extraction); other bioactive pigments, including chlorophyll a (chl a), carotenoids, and other phycobiliproteins (PBPs), but also antioxidant (AOX) capacity and extraction yields were also evaluated for their optimum UAE yields. A factorial design based on Box–Behnken model was developed; and the influence of such extraction parameters as biomass to solvent ratio (B/S ratio = 1.5–8.5 mg·mL⁻¹), duty cycle (DT = 40–100%), and percentage of amplitude (A = 40–100%) were evaluated. The model predicted higher PC yields with high B/S ratio = 6 mg·mL⁻¹, lower DT = 80% and an A = 100%. Classical extraction was compared with UAE under the optimum conditions found; the latter improved PC yields by 12.5% and 47.8%, when compared to freeze-thawing extraction, and bead beater homogenization-based extraction, respectively. UAE successive extractions allowed to valorize other important bioactive compounds than PC, by reusing biomass, supporting a favorable contribution to the economic feasibility of the S. salina-based process towards a biorefinery approach.

Combining high intensity ultrasound and experimental design to improve carotenoid extraction efficiency from Buriti (Mauritia flexuosa)

Buriti (Mauritia flexuosa L.) is a significant source of carotenoids, but these compounds have been extracted using laborious and low-effective methods. The present work evaluated the high-intensity ultrasound combined with a chemometric approach to developing an optimal extraction method of carotenoids from buriti pulp. The multivariate optimization was carried out through two steps. First, a simplex-lattice mixture design was used to optimize the extractor solution finding higher extraction yield (903 ± 21 µg g^-1) with the acetone:ethanol (75/25) mixture. After, sample mass (80 mg) and sonication time (30 min) were optimized applying central composite design (CCD) which provided a 14% improvement in the extraction method yield. So, the total carotenoid content (TCC) with optimal extraction conditions was 1026 ± 13 µg g^-1which is almost twice the yield of methods known in the literature for buriti. The RP-HPLC-DAD analysis revealed that the carotenoids are gently extracted and β-carotene is the major compound in the extracts. To confirm the accuracy, buriti samples spiked with β-carotene standard and the developed method showed recovery >84% and precision <6.5%. Furthermore, the optimized ultrasound-assisted extraction (UAE) method was applied to other samples (tomato, guava, carrot, mango, acerola, papaya, and pumpkin) and presented a yield to 5.5-fold higher when compared to the reported methods indicating high robustness. Based on results, the UAE method developed has demonstrated feasibility and reliability for the study of carotenoids in buriti pulp as well as in other plant matrices with high biological relevance.

Extraction of lipids from microalgae using classical and innovative approaches

Microalgae, as a photosynthetic autotrophic organism, contain a variety of bioactive compounds, including lipids, proteins, polysaccharides, which have been applied in food, medicine, and fuel industries, among others. Microalgae are considered a good source of marine lipids due to their high content in unsaturated fatty acid (UFA) and can be used as a supplement/replacement for fish-based oil. The high concentration of docosahexaenoic (DHA) and eicosapentaenoic acids (EPA) in microalgae lipids, results in important physiological functions, such as antibacterial, anti-inflammatory, and immune regulation, being also a prerequisite for its development and application. In this paper, a variety of approaches for the extraction of lipids from microalgae were reviewed, including classical and innovative approaches, being the advantages and disadvantages of these methods emphasized. Further, the effects of microalgae lipids as high value bioactive compounds in human health and their use for several applications are dealt with, aiming using green(er) and effective methods to extract lipids from microalgae, as well as develop and extend their application potential.

Ultrasound for microalgal cell disruption and product extraction: A review

Microalgae are a promising feedstock for the production of biofuels, nutraceuticals, pharmaceuticals and cosmetics, due to their superior capability of converting solar energy and CO₂ into lipids, proteins, and other valuable bioactive compounds. To facilitate the release of these important biomolecules from microalgae, effective cell disruption is usually necessary, where the use of ultrasound has gained tremendous interests as an alternative to traditional methods. This review not only summarizes the mechanisms of and operation parameters affecting cell disruption, but also takes an insight into measuring techniques, synergistic integration with other disruption methods, and challenges of ultrasonication for microalgal biorefining. Optimal conditions including ultrasonic frequency, intensity, and duration, and liquid viscosity and sonochemical reactor are the key factors for maximizing the disruption and extraction efficiency. A combination of ultrasound with other disruption methods such as ozonation, microwave, homogenization, enzymatic lysis, and solvents facilitates cell disruption and release of target compounds, thus provides powerful solutions to commercial scale-up of ultrasound extraction for microalgal biorefining. It is concluded that ultrasonication is a sustainable "green" process, but more research and work are needed to upscale this process without sacrificing performance or consuming more energy.

Effect of the duty cycle of the ultrasonic processor on the efficiency of extraction of phenolic compounds from Sorbus intermedia

This paper studies the effect of different ultrasonic parameters on the yield of extraction and antioxidant activity of selected phenolic compounds from Sorbus intermedia berries. The sonication was carried out in two modes: continuous and pulse. In the pulse mode, the samples were sonicated with the following processor settings: 1 s on–2 s off. The effective ultrasonic processor times were 5, 10, and 15 min, and the total extraction times were 15, 30, and 45 min. The results showed that the duty cycle significantly affected the antioxidant activity of the extracts and the yield of chlorogenic acid, rutin, and total flavonoids. Compared to the continuous mode, the pulse ultrasound increased the extraction yield of rutin by 5–27%, chlorogenic acid by 12–29%, and total flavonoids by 8–42%. The effect of the duty cycle on the extraction yield was dependent on the intensity and duration of the ultrasound treatment. The mechanism of the influence of the pulsed ultrasound field on the extraction process has been elucidated. This research clearly demonstrated the superiority of pulsed ultrasound-assisted extraction for production of antioxidants from Sorbus intermedia berries.

Brazilian tucumã-do-Amazonas (Astrocaryum aculeatum) and tucumã-do-Pará (Astrocaryum vulgare) fruits: bioactive composition, health benefits, and technological potential

Latin America has a wide range of native plants spread through its territory. The palms of the Astrocaryum genus are examples of crops occurring in Central and South America, including the large plant life in Brazil. Although not very well known, the Astrocaryum spp. possess edible and non-edible fractions with potential technological and medicinal uses, as evidenced by recent research. Two native Brazilian fruits, tucumã-do-Amazonas (Astrocaryum aculeatum) and tucumã-do-Pará (Astrocaryum vulgare), typically found in the north and northeast of the country, respectively, stand out for their high antioxidant capacity and rich content in bioactive compounds, mainly carotenoids and phenolic compounds. Accordingly, experimental studies indicate their potential to prevent and treat inflammatory and oxidative stress-related conditions, including cancer. The tucumã plants have also been suggested as tools in the industry, for example for biofuel production, activated carbon technology, and as alternative packaging. Considering the importance of bringing light to underestimated yet culturally relevant native crops with potential benefits for small and large communities, this review aims to present and discuss the characteristics, bioactive composition, health effects, and technological potential of tucumã-do-Amazonas and tucumã-do-Pará fruits.

Advances in production of bioplastics by microalgae using food waste hydrolysate and wastewater: A review

Microalgae have emerged as an effective dual strategy for bio-valorisation of food processing wastewater and food waste hydrolysate which favours microalgae cultivation into producing value-added by products mainly lipids, carbohydrates, and proteins to the advantages of bioplastic production. Moreover, various microalgae have successfully removed high amount of organic pollutants from food processing wastewater prior discharging into the environment. Innovation of microalgae cultivating in food processing wastewater greatly reduced the cost of wastewater treatment compared to conventional approach in terms of lower carbon emissions, energy consumption, and chemical usage while producing microalgae biomass which can benefit low-cost fertilizer and bioplastic applications. The study on several microalgae species has all successfully grown on food waste hydrolysates showing high exponential growth rate and biomass production rich in proteins, lipids, carbohydrates, and fatty acids. Multiple techniques have been implemented for the extraction of food wastes to be incorporate into the bioplastic production.

Process Efficiency and Energy Consumption during the Ultrasound-Assisted Extraction of Bioactive Substances from Hawthorn Berries

This study investigated the impact of sonication parameters on the efficiency of the extraction of bioactive substances from hawthorn berries. The ultrasonic treatment was performed in two modes: continuous and pulse. In the pulse mode, the samples were sonicated with the following processor settings: 1 s on-2 s off. The effective ultrasonic processor times were 5, 10, and 15 min, and the total extraction times were 15 min, 30 min, and 45 min. The content of total polyphenols and total anthocyanins was determined by a spectrophotometric method. We show that the operating mode of the processor affects extraction efficiency, energy consumption and unit energy inputs. Extraction supported by a pulsating ultrasonic field allowed saving from 20% to 51% of energy with a simultaneous higher efficiency of the process. In addition, we show that the unit energy consumption in the pulsed mode was about 40% to 68% lower than the energy consumption in the case of continuous operation.

Use of ultrasound for aiding lipid extraction and biodiesel production of microalgae harvested by chitosan

In this work, chitosan, a biodegradable flocculant, was investigated to determine its utility in flocculating microalgae, its effect on cell integrity, and its impact on lipid extraction and the conversion to fatty acid methyl ester (FAME). Results showed that chitosan adequately performed flocculation on Chlorella vulgaris microalgae and achieved a high harvesting efficiency of 96.35 ± 1.96% when implemented under the following conditions: chitosan dose = 120 mg/L^-1, pH = 5, mixing speed = 150 rpm for 20 min, followed by 10 min of settling time. Moreover, scanning electron microscope (SEM) combined with transmission electron microscope (TEM) demonstrated that chitosan protected the cells' structure from morphological damage. Finally, the highest lipid extraction yield and biodiesel production was obtained from the chitosan-harvested biomass when the microalgae were pretreated with ultrasound.

Insights into diatom microalgal farming for treatment of wastewater and pretreatment of algal cells by ultrasonication for value creation

Wastewater management and its treatment have revolutionized the industry sector into many innovative techniques. However, the cost of recycling via chemical treatment has major issues especially in economically poor sectors. On the offset, one of the most viable and economical techniques to clean wastewater is by growing microalgae in it. Since wastewater is rich in nitrates, phosphates and other trace elements, the environment is suitable for the growth of microalgae. On the other side, the cost of harvesting microalgae for its secondary metabolites is burgeoning. While simultaneously growing of microalgae in photobioreactors requires regular feeding of the nutrients and maintenance which increases the cost of operation and hence cost of its end products. The growth of microalgae in waste waters makes the process not only economical but they also manufacture more amounts of value added products. However, harvesting of these values added products is still a cumbersome task. On the offset, it has been observed that pretreating the microalgal biomass with ultrasonication allows easy oozing of the secondary metabolites like oil, proteins, carbohydrates and methane at much lower cost than that required for their extraction. Among microalgae diatoms are more robust and have immense crude oil and are rich in various value added products. However, due to their thick silica walls they do not ooze the metabolites until the mechanical force on their walls reaches certain threshold energy. In this review recycling of wastewater using microalgae and its pretreatment via ultrasonication with special reference to diatoms is critically discussed. Perspectives on circular bioeconomy and knowledge gaps for employing microalgae to recycle wastewater have been comprehensively narrated.

Benefits and Drawbacks of Ultrasound-Assisted Extraction for the Recovery of Bioactive Compounds from Marine Algae

The increase in life expectancy has led to the appearance of chronic diseases and interest in healthy aging, in turn promoting a growing interest in bioactive compounds (BCs) and functional ingredients. There are certain foods or products rich in functional ingredients, and algae are one of them. Algae consumption has been nominal in Europe until now. However, in recent years, it has grown significantly, partly due to globalization and the adoption of new food trends. With the aim of obtaining BCs from foods, multiple methods have been proposed, ranging from conventional ones, such as maceration or Soxhlet extraction, to more innovative methods, e.g., ultrasound-assisted extraction (UAE). UAE constitutes a novel method, belonging to so-called green chemistry, that enables the extraction of BCs requiring lower amounts of solvent and energy costs, preserving the integrity of such molecules. In recent years, this method has been often used for the extraction of different BCs from a wide range of algae, especially polysaccharides, such as carrageenans and alginate; pigments, including fucoxanthin, chlorophylls, or β-carotene; and phenolic compounds, among others. In this way, the application of UAE to marine algae is an efficient and sustainable strategy to pursue their deep characterization as a new source of BCs, especially suitable for vegetarian and vegan diets.

Optimization of ultrasonic-assisted extraction of astaxanthin from green tiger (Penaeus semisulcatus) shrimp shell

This study was aimed at optimizing the astaxanthin extraction efficiency from shrimp shell (green tiger, Penaeus semisulcatus). Astaxanthin was extracted using selected nonpolar/polar solvents (petroleum ether, n-hexane, ethanol, acetone) individually and in ternary mixtures of petroleum ether, acetone, and water in ratios of 15:50:35, 50:45:5, and 15:75:10 for different times (2,4 and 6 h). The results showed that solvents with higher polarity were more suitable for the extraction of astaxanthin, and increasing the extraction time from 2 to 6 h improved the extraction yield. The conditions of extraction of astaxanthin with the desirable solvent were then optimized with the ultrasonic method using the Box-Behnken design [variables included: extraction temperature (25 to 45 °C), extraction time (5 to 15 min), and ultrasound amplitude (20 to 100%)]. Optimal extraction conditions were determined as the ultrasonic amplitude of 23.6%, extraction time of 13.9 min, and extraction temperature of 26.3 °C. Under this optimum condition, the amount of astaxanthin, ferric reducing antioxidant power, and free radical scavenging capacity of the extract were obtained as 51.5%, 1705 μmol of Fe2+/g, and 73.9%, respectively. Extraction and analysis of the extract at the optimum point were used to validate the results.

Mechanical Cell Disruption Technologies for the Extraction of Dyes and Pigments from Microorganisms: A Review

The production of pigments using single cell microorganisms is gaining traction as a sustainable alternative to conventional syntheses, which rely, in no negligible proportions, on petrochemicals. In addition to depending on petroleum, these syntheses involved the use of toxic organic solvents, which may be inadequately disposed of across a range of industries, thus compounding the deleterious effects of fossil fuel exploitation. Literature suggests that notable research efforts in the area of sustainable pigment production using single cell microorganisms are focused on the production of pigments coveted for their interesting qualities, which transcend their mere capacity to dye various fabrics both natural and synthetic. As interest in sustainable pigment biosynthesis grows, the need to devise effective and efficient cell disruption processes becomes more pressing given that the viability of pigment biosynthesis is not only dependent on microorganisms’ yield in terms of production, but also on researchers’ ability to recover them. This review chiefly reports findings as to mechanical cell disruption methods, used individually or in various combinations, and their aptitude to recover biosynthetic pigments.

Antioxidant activities of some edaphic algae in Egypt

Background

Algae in general characterized by their rich content of biological compounds. However, few studies were conducted on the soil-inhabiting algae and their antioxidant characteristics.

Results

The present study was designed to evaluate the antioxidant activity of four edaphic algae including one on-soil alga (Vaucheria geminata) and three axenic isolated in-soil algae (Pleurochloris pyrenoidosa, Botrydiopsis eriensis, and Scenedesmus obliquus). Total antioxidant activity by Phosphomolybdenum assay ranged from 6.66 to 36.33 mg of Asc/g dwt; meanwhile, the percentage inhibition of DPPH radical was up to 97.37%. Antioxidant activity of each alga was assessed also by measuring their contents of total phenols, flavonoids, and pigments (chlorophyll a and carotenoids). B. eriensis and S. obliquus recorded the highest levels of phenols, flavonoids, and chlorophyll a followed by P. pyrenoidosa and V. geminata, while B. eriensis showed the highest carotenoids content. Moreover, about seven types of each phenol and flavonoid compound were identified by HPLC chromatography in the four algae under investigation. The most common detected phenols were gallic, chlorogenic, caffeic, and ferulic, while rutin, quercetin, apigenin, and quercitrin were the most abundant flavonoids among all algae under investigation.

Conclusion

All the tested algae were characterized with high antioxidant activities besides the rich contents of compounds with antioxidant properties which recommend their further potential using in nutritional, pharmaceutical, and medicinal implications.

Ultrasound-assisted packed-bed extraction of hypericin from Hypericum perforatum L. and optimization by response surface methodology

This paper presents the successful application of ultrasound-assisted packed-bed (UAE-PB) method for the extraction of hypericin from the Hypericum perfuratum L. The Soxhlet system was utilized for the determination of suitable solvent from ethanol, methanol or from the mixture of different proportions of ethanol-methanol. The mixture of 50:50 v/v ethanol-methanol was obtained to be the most suitable solvent since it led to the highest extraction amount of hypericin. The extraction amount of hypericin increased by 13.6% and 21.4% when the solvent changed from pure methanol to the mixture of 50:50 v/v ethanol-methanol for the extraction time of 3 and 8 h, respectively. Subsequently, the extraction was conducted through the UAE-PB, and the effects of temperature, time, and the ratio of solvent to the dried plant were studied. The response surface method (RSM) was used to investigate the effect of parameters on the extraction in the UAE-PB system. At the temperature of 60 °C, extraction time of 105 min, and the solvent to plant ratio of 15.3, the maximum extraction yield of hypericin was achieved. In the optimal conditions, the amount of extraction was 0.112 mg hypericin/g dried plant, which was in accordance with the optimized predicted value (0.111 mg hypericin/g dried plant) from Design-Expert software.

Enhanced production of biosynthesized lycopene via heterogenous MVA pathway based on chromosomal multiple position integration strategy plus plasmid systems in Escherichia coli

The multiple plasmid system, mostly relied, for heterogeneous gene expression, results in genetic instability and low mean productivity. To address this, an integration method was employed for investigating expression of heterogenous pathway in E. coli cells; where mevalonate upper pathway was found efficiently expressed. Subsequently, to improve lycopene production, chromosomal multiple position integration strategy was used to strengthen mevalonate upper pathway. Meanwhile, the plasmid system was employed for mevalonate lower pathway and lycopene pathway expression to finally generate the mutant D711 strain. Comparatively, highest level of 68.5 mg/L lycopene was produced by D711 outperforming its maximum average productivity of 2.85 mg/L/h with over 2-folds enhancement. In addition, lycopene level was almost 224 mg/L after optimization of induction time, which was 3.3-fold higher than standard control condition. Finally, expression Performance Parameter was developed for scoring mutants and evaluating these two strategies, indicating chromosomal multiple position integration strategy as more efficient approach.

Microalgae as feedstock for biodiesel production under ultrasound treatment - A review

The application of ultrasound in biodiesel production has recently emerged as a novel technology. Ultrasound treatment enhances the mass transfer characteristics leading to the increased reaction rate with short reaction time and potentially reduces the production cost. In this review, application of ultrasound-assisted biodiesel production using acid, base and enzyme catalysts is presented. A critical assessment of the current status of ultrasound in biodiesel production was discussed with the emphasis on using ultrasound for efficient microalgae biodiesel production. The ultrasound in the biodiesel production enhances the emulsification of immiscible liquid reactant by microturbulence generated by cavitation bubbles. The major benefit of the ultrasound-assisted biodiesel production is a reduction in reaction time. Several different methods have been discussed to improve the biodiesel production. Overall, this review focuses on the current understanding of the application of ultrasound in biodiesel production from microalgae and to provide insights into future developments.

Ultrasonic disruption of Pseudomonas putida for the release of arginine deiminase: Kinetics and predictive models

The responses of the ultrasound-mediated disruption of Pseudomonas putida KT2440 were modelled as the function of biomass concentration in the cell suspension; the treatment time of sonication; the duty cycle and the acoustic power of the sonicator. For the experimental data, the response surface (RSM), the artificial neural network (ANN) and the support vector machine (SVM) models were compared for their ability to predict the performance parameters. The satisfactory prediction of the unseen data of the responses implied the proficient generalization capabilities of ANN. The extent of the cell disruption was mainly dependent on the acoustic power and the biomass concentration. The cellmass concentration in the slurry most strongly influenced the ADI and total protein release. Nearly 28U/mL ADI was released when a biomass concentration of 300g/L was sonicated for 6min with an acoustic power of 187.5W at 40% duty cycle. Cell disruption obeyed first-order kinetics.