Enrichment of extremophilic exoelectrogens in microbial electrolysis cells using Red Sea brine pools as inocula

Generation of green electricity from sludge using photo-stimulated bacterial consortium as a sustainable technology

Microbial fuel cell (MFC) is a bio-electrical energy generator that uses respiring microbes to transform organic matter present in sludge into electrical energy. The primary goal of this work was to introduce a new approach to the green electricity generation technology. In this context a total of 6 bacterial isolates were recovered from sludge samples collected from El-Sheikh Zayed water purification plant, Egypt, and screened for their electrogenic potential. The most promising isolates were identified according to 16S rRNA sequencing as Escherichia coli and Enterobacter cloacae, promising results were achieved on using them in consortium at optimized values of pH (7.5), temperature (30°C) and substrate (glucose/pyruvate 1%). Low level red laser (λ = 632.8nm, 8mW) was utilized to promote the electrogenic efficiency of the bacterial consortium, maximum growth was attained at 210 sec exposure interval. In an application of adding standard inoculum (107 cfu/mL) of the photo-stimulated bacterial consortium to sludge based MFC a significant increase in the output potential difference values were recorded, the electricity generation was maintained by regular supply of external substrate. These results demonstrate the future development of the dual role of MFCs in renewable energy production and sludge recycling.

Recent advances in enrichment, isolation, and bio-electrochemical activity evaluation of exoelectrogenic microorganisms

Exoelectrogenic microorganisms (EEMs) catalyzed the conversion of chemical energy to electrical energy via extracellular electron transfer (EET) mechanisms, which underlay diverse bio-electrochemical systems (BES) applications in clean energy development, environment and health monitoring, wearable/implantable devices powering, and sustainable chemicals production, thereby attracting increasing attentions from academic and industrial communities in the recent decades. However, knowledge of EEMs is still in its infancy as only ~100 EEMs of bacteria, archaea, and eukaryotes have been identified, motivating the screening and capture of new EEMs. This review presents a systematic summarization on EEM screening technologies in terms of enrichment, isolation, and bio-electrochemical activity evaluation. We first generalize the distribution characteristics of known EEMs, which provide a basis for EEM screening. Then, we summarize EET mechanisms and the principles underlying various technological approaches to the enrichment, isolation, and bio-electrochemical activity of EEMs, in which a comprehensive analysis of the applicability, accuracy, and efficiency of each technology is reviewed. Finally, we provide a future perspective on EEM screening and bio-electrochemical activity evaluation by focusing on (i) novel EET mechanisms for developing the next-generation EEM screening technologies, and (ii) integration of meta-omics approaches and bioinformatics analyses to explore nonculturable EEMs. This review promotes the development of advanced technologies to capture new EEMs.

Bioelectrochemical systems for enhanced nitrogen removal with minimal greenhouse gas emission from carbon-deficient wastewater: A review

Nitrogen pollution and the rising amount of wastewater generation are calling for advanced wastewater treatments, which is particularly necessary for carbon-deficient wastewater that contains multi-species inorganic nitrogen, since conventional heterotrophic denitrification processes cannot remove nitrogen completely when carbon sources are insufficient. For that, bioelectrochemical systems (BES) have been recently developed because they can simultaneously produce electricity and remove resistant nitrogen from the carbon-deficient wastewater. However, the simultaneous removal of multi-species inorganic nitrogen cannot be achieved by electroautotrophic denitrification using BES alone. Moreover, the efficiency of nitrogen removal and power generation has been thwarted by the low energy output, high internal resistance of the device, and electron competition in non-denitrification pathways. This review article discusses the latest developments for nitrogen removal through BES-enhanced denitrification and elucidates multiple coupled BES-based denitrification pathways to remove multi-species inorganic nitrogen simultaneously. Focus points of the research area include coupling BES technologies with emerged methods, electron transfer enhancement, and avoiding electron competition that improves performance with less cost. The prospect of reducing emissions of greenhouse gases is also critically reviewed, in the hope of reducing potential intermediate products of denitrification, such as nitrous oxide (a potent greenhouse gas), through multi-factor regulation. We imply that BES is a good choice for future scale-up applications of MFC coupled with MEC to treat carbon-deficient wastewater. Overall, this review will provide useful information for the development of advanced technologies to treat carbon-deficient wastewater with less emission of greenhouse gases.

High current density via direct electron transfer by hyperthermophilic archaeon, Geoglobus acetivorans, in microbial electrolysis cells operated at 80 °C

Utilization of hyperthermophilic electro-active microorganisms in microbial electrolysis cells (MECs) that are used for hydrogen production from organic wastes offers significant advantages, such as increased reaction rate and enhanced degradation of insoluble materials. However, only a limited number of hyperthermophilic bioelectrochemical systems have been investigated so far. This study is the first to illustrate hydrogen production in hyperthermophilic MECs with a maximum rate of 0.57 ± 0.06 m³ H₂/m³d, where an iron reducing archaeon, Geoglobus acetivorans, was used as inoculum. In fact, this is the first study to report that G. acetivorans, as the fourth hyperthermophilic electro-active archaeon. In single chamber MECs operated at 80 °C with a set potential of 0.7 V, a peak current density of 1.53 ± 0.24 A/m² has been attained and this is the highest record of current produced by pure culture hyperthermophilic microorganisms. Turnover cyclic voltammetry curve illustrated a sigmoidal shape (midpoint of -0.40 V vs. Ag/AgCl), and together with linear relation of scan rate and peak anodic current, proves the biofilm attachment to the anode and its capability of direct electron transfer. Along with simple substrate (acetate), G. acetivorans effectively utilized dark fermentation effluent for hydrogen production in MECs.

Enrichment of salt-tolerant CO2-fixing communities in microbial electrosynthesis systems using porous ceramic hollow tube wrapped with carbon cloth as cathode and for CO2 supply

Microbial inocula from marine origins are less explored for CO₂ reduction in microbial electrosynthesis (MES) system, although effective CO₂-fixing communities in marine environments are well-documented. We explored natural saline habitats, mainly salt marsh (SM) and mangrove (M) sediments, as potential inoculum sources for enriching salt-tolerant CO₂ reducing community using two enrichment strategies: H₂:CO₂ (80:20) enrichment in serum vials and enrichment in cathode chamber of MES reactors operated at -1.0 V vs. Ag/AgCl. Porous ceramic hollow tube wrapped with carbon cloth was used as cathode and for direct CO₂ delivery to CO₂ reducing communities growing on the cathode surface. Methanogenesis was dominant in both the M- and SM-seeded MES and the methanogenic Archaea Methanococcus was the most dominant genus. Methane production was slightly higher in the SM-seeded MES (4.9 ± 1.7 mmol) compared to the M-seeded MES (3.8 ± 1.1 mmol). In contrast, acetate production was almost two times higher in the M-seeded MES (3.1 ± 0.9 mmol) than SM-seeded MES (1.5 ± 1.3 mmol). The high relative abundance of the genus Acetobacterium in the M-seeded serum vials correlates with the high acetate production obtained. The different enrichment strategies affected the community composition, though the communities in MES reactors and serum vials were performing similar functions (methanogenesis and acetogenesis). Despite similar operating conditions, the microbial community composition of M-seeded serum vials and MES reactors differed from the SM-seeded serum vials and MES reactors, supporting the importance of inoculum source in the evolution of CO₂-reducing microbial communities.

Advanced microbial fuel cell for waste water treatment-a review

Petroleum, coal, and natural gas reservoir were depleting continuously due to an increase in industrialization, which enforced study to identify alternative sources. The next option is the renewable resources which are most important for energy purpose coupled with environmental problem reduction. Microbial fuel cells (MFCs) have become a promising approach to generate cleaner and more sustainable electrical energy. The involvement of various disciplines had been contributing to enhancing the performance of the MFCs. This review covers the performance of MFC along with different wastewater as a substrate in terms of treatment efficiencies as well as for energy generation. Apart from this, effect of various parameters and use of different nanomaterials for performance of MFC were also studied. From the current study, it proves that the use of microbial fuel cell along with the use of nanomaterials could be the waste and energy-related problem-solving approach. MFC could be better in performances based on optimized process parameters for handling any wastewater from industrial process.

Bioelectrochemically enhanced degradation of bisphenol S: mechanistic insights from stable isotope-assisted investigations

Electroactive microbes is the driving force for the bioelectrochemical degradation of organic pollutants, but the underlying microbial interactions between electrogenesis and pollutant degradation have not been clearly identified. Here, we combined stable isotope-assisted metabolomics (SIAM) and 13C-DNA stable isotope probing (DNA-SIP) to investigate bisphenol S (BPS) enhanced degradation by electroactive mixed-culture biofilms (EABs). Using SIAM, six 13C fully labeled transformation products were detected originating via hydrolysis, oxidation, alkylation, or aromatic ring-cleavage reactions from 13C-BPS, suggesting hydrolysis and oxidation as the initial and key degradation pathways for the electrochemical degradation process. The DNA-SIP results further displayed high 13C-DNA accumulation in the genera Bacteroides and Cetobacterium from the EABs and indicated their ability in the assimilation of BPS or its metabolites. Collectively, network analysis showed that the collaboration between electroactive microbes and BPS assimilators played pivotal roles the improvement in bioelectrochemically enhanced BPS degradation.

Allochthonous and Autochthonous Halothermotolerant Bioanodes From Hypersaline Sediment and Textile Wastewater: A Promising Microbial Electrochemical Process for Energy Recovery Coupled With Real Textile Wastewater Treatment

The textile and clothing industry is the first manufacture sector in Tunisia in terms of employment and number of enterprises. It generates large volumes of textile dyeing wastewater (TDWW) containing high concentrations of saline, alkaline, and recalcitrant pollutants that could fuel tenacious and resilient electrochemically active microorganisms in bioanodes of bioelectrochemical systems. In this study, a designed hybrid bacterial halothermotolerant bioanode incorporating indigenous and exogenous bacteria from both hypersaline sediment of Chott El Djerid (HSCE) and TDWW is proposed for simultaneous treatment of real TDWW and anodic current generation under high salinity. For the proposed halothermotolerant bioanodes, electrical current production, chemical oxygen demand (COD) removal efficiency, and bacterial community dynamics were monitored. All the experiments of halothermotolerant bioanode formation have been conducted on 6 cm² carbon felt electrodes polarized at -0.1 V/SCE and inoculated with 80% of TDWW and 20% of HSCE for 17 days at 45°C. A reproducible current production of about 12.5 ± 0.2 A/m² and a total of 91 ± 3% of COD removal efficiency were experimentally validated. Metagenomic analysis demonstrated significant differences in bacterial diversity mainly at species level between anodic biofilms incorporating allochthonous and autochthonous bacteria and anodic biofilm containing only autochthonous bacteria as a control. Therefore, we concluded that these results provide for the first time a new noteworthy alternative for achieving treatment and recover energy, in the form of a high electric current, from real saline TDWW.

Electroactive biofilms on surface functionalized anodes: The anode respiring behavior of a novel electroactive bacterium, Desulfuromonas acetexigens

Surface chemistry is known to influence the formation, composition, and electroactivity of electron-conducting biofilms. However, understanding of the evolution of microbial composition during biofilm development and its impact on the electrochemical response is limited. Here we present voltammetric, microscopic and microbial community analysis of biofilms formed under fixed applied potential for modified graphite electrodes during early (90 h) and mature (340 h) growth phases. Electrodes modified to introduce hydrophilic groups (-NH₂, -COOH and -OH) enhance early-stage biofilm formation compared to unmodified or electrodes modified with hydrophobic groups (-C₂H₅). In addition, early-stage films formed on hydrophilic electrodes are dominated by the gram-negative sulfur-reducing bacterium Desulfuromonas acetexigens while Geobacter sp. dominates on -C₂H₅ and unmodified electrodes. As biofilms mature, current generation becomes similar, and D. acetexigens dominates in all biofilms irrespective of surface chemistry. Electrochemistry of pure culture D. acetexigens biofilms reveal that this microbe is capable of forming electroactive biofilms producing considerable current density of > 9 A/m² in a short period of potential-induced growth (~19 h following inoculation) using acetate as an electron donor. The inability of D. acetexigens biofilms to use H₂ as a sole source electron donor for current generation shows promise for maximizing H₂ recovery in single-chambered microbial electrolysis cell systems treating wastewaters.

Microbial electroactive biofilms dominated by Geoalkalibacter spp. from a highly saline-alkaline environment

Understanding of the extreme microorganisms that possess extracellular electron transfer (EET) capabilities is pivotal to advance electromicrobiology discipline and to develop niche-specific microbial electrochemistry-driven biotechnologies. Here, we report on the microbial electroactive biofilms (EABs) possessing the outward EET capabilities from a haloalkaline environment of the Lonar lake. We used the electrochemical cultivation approach to enrich haloalkaliphilic EABs under 9.5 pH and 20 g/L salinity conditions. The electrodes controlled at 0.2 V vs. Ag/AgCl yielded the best-performing biofilms in terms of maximum bioelectrocatalytic current densities of 548 ± 23 and 437 ± 17 µA/cm² with acetate and lactate substrates, respectively. Electrochemical characterization of biofilms revealed the presence of two putative redox-active moieties with the mean formal potentials of 0.183 and 0.333 V vs. Ag/AgCl, which represent the highest values reported to date for the EABs. 16S-rRNA amplicon sequencing of EABs revealed the dominance of unknown Geoalkalibacter sp. at ~80% abundance. Further investigations on the haloalkaliphilic EABs possessing EET components with high formal potentials might offer interesting research prospects in electromicrobiology.

Production of Current by Syntrophy Between Exoelectrogenic and Fermentative Hyperthermophilic Microorganisms in Heterotrophic Biofilm from a Deep-Sea Hydrothermal Chimney

To study the role of exoelectrogens within the trophic network of deep-sea hydrothermal vents, we performed successive subcultures of a hyperthermophilic community from a hydrothermal chimney sample on a mix of electron donors in a microbial fuel cell system. Electrode (the electron acceptor) was swapped every week to enable fresh development from spent media as inoculum. The MFC at 80 °C yielded maximum current production increasing from 159 to 247 mA m^-2 over the subcultures. The experiments demonstrated direct production of electric current from acetate, pyruvate, and H₂ and indirect production from yeast extract and peptone through the production of H₂ and acetate from fermentation. The microorganisms found in on-electrode communities were mainly affiliated to exoelectrogenic Archaeoglobales and Thermococcales species, whereas in liquid media, the communities were mainly affiliated to fermentative Bacillales and Thermococcales species. The work shows interactions between fermentative microorganisms degrading complex organic matter into fermentation products that are then used by exoelectrogenic microorganisms oxidizing these reduced compounds while respiring on a conductive support. The results confirmed that with carbon cycling, the syntrophic relations between fermentative microorganisms and exoelectrogens could enable some microbes to survive as biofilm in extremely unstable conditions. Graphical Abstract Schematic representation of cross-feeding between fermentative and exoelectrogenic microbes on the surface of the conductive support. B, Bacillus/Geobacillus spp.; Tc, Thermococcales; Gg, Geoglobus spp.; Py, pyruvate; Ac, acetate.

Enrichment of Marinobacter sp. and Halophilic Homoacetogens at the Biocathode of Microbial Electrosynthesis System Inoculated With Red Sea Brine Pool

Homoacetogens are efficient CO₂ fixing bacteria using H₂ as electron donor to produce acetate. These organisms can be enriched at the biocathode of microbial electrosynthesis (MES) for electricity-driven CO₂ reduction to acetate. Studies exploring homoacetogens in MES are mainly conducted using pure or mix-culture anaerobic inocula from samples with standard environmental conditions. Extreme marine environments host unique microbial communities including homoacetogens that may have unique capabilities due to their adaptation to harsh environmental conditions. Anaerobic deep-sea brine pools are hypersaline and metalliferous environments and homoacetogens can be expected to live in these environments due to their remarkable metabolic flexibility and energy-efficient biosynthesis. However, brine pools have never been explored as inocula for the enrichment of homacetogens in MES. Here we used the saline water from a Red Sea brine pool as inoculum for the enrichment of halophilic homoacetogens at the biocathode (-1 V vs. Ag/AgCl) of MES. Volatile fatty acids, especially acetate, along with hydrogen gas were produced in MES systems operated at 25 and 10% salinity. Acetate concentration increased when MES was operated at a lower salinity ∼3.5%, representing typical seawater salinity. Amplicon sequencing and genome-centric metagenomics of matured cathodic biofilm showed dominance of the genus Marinobacter and phylum Firmicutes at all tested salinities. Seventeen high-quality draft metagenome-assembled genomes (MAGs) were extracted from the biocathode samples. The recovered MAGs accounted for 87 ± 4% of the quality filtered sequence reads. Genome analysis of the MAGs suggested CO₂ fixation via Wood-Ljundahl pathway by members of the phylum Firmicutes and the fixed CO₂ was possibly utilized by Marinobacter sp. for growth by consuming O₂ escaping from the anode to the cathode for respiration. The enrichment of Marinobacter sp. with homoacetogens was only possible because of the specific cathodic environment in MES. These findings suggest that in organic carbon-limited saline environments, Marinobacter spp. can live in consortia with CO₂ fixing bacteria such as homoacetogens, which can provide them with fixed carbon as a source of carbon and energy.

Decolorization of Acid Orange 7 by extreme-thermophilic mixed culture

Although a large amount of textile wastewater is discharged at high temperatures, azo dye reduction under extreme-thermophilic conditions by mixed cultures has gained little attention. In this study, Acid Orange 7 (AO7) was used as the model azo dye to demonstrate the decolorization ability of an extreme-thermophilic mixed culture. The results showed that a decolorization efficiency of over 90% was achieved for AO7. The neutral red (NR, 0.1 mM) could promote AO7 decolorization, in which the group of Cell + NR offered the highest decolorization rate of 1.568 1/h and t_1/2 was only 0.44 h, whereas after CuCl₂ addition, the decolorization rate (0.141 1/h) was lower and t_1/2 (4.92 h) was much longer. Thus, CuCl₂ notably inhibited this process. Caldanaerobacter (64.0%) and Pseudomonas (25.4%) were the main enriched bacteria, which were not reported to have the ability for dye decolorization. Therefore, this study extends the application of extreme-thermophilic biotechnology.

Influence of two polarization potentials on a bioanode microbial community isolated from a hypersaline coastal lagoon of the Yucatan peninsula, in México

In recent years, halotolerant biofilms have become a subject of interest for its application in Bioelectrochemical systems for wastewater treatment. To determine if the polarization potential affects the microbial community of a halotolerant bioanode, four bioanodes were poised at potentials of +0.34 V/SHE and - 0.16 V/SHE and the 16S rRNA gene was analyzed through a MiSeq (Ilumina) system. Oceanospirillum, Halomonas and Marinobacterium were the most predominant genus; no previous studies have reported the presence of Oceanospirillum in anodic biofilms. The fitness with the dataset for +0.34 V/SHE with a modified Butler Volmer Monod model, gives a value of K₁ was 0.0002 (2.64 A m^-2 and 38% coulombic efficiency), indicating the fastest electrochemical reaction. Whereas that -0.16 V/SHE case, the high value of K₁ (12.2 with 1.82 A m^-2 and 10% coulombic efficiency) indicated that the electron transfer was far from being reversible (Nernstian).

Understanding the cumulative effects of salinity, temperature and inoculation size for the design of optimal halothermotolerant bioanodes from hypersaline sediments

The main objective of this study was to understand the interaction between salinity, temperature and inoculum size and how it could lead to the formation of efficient halothermotolerant bioanodes from the Hypersaline Sediment of Chott El Djerid (HSCE). Sixteen experiments on bioanode formation were designed using a Box-Behnken matrix and response surface methodology to understand synchronous interactions. All bioanode formations were conducted on 6 cm² carbon felt electrodes polarized at -0.1 V/SCE and fed with lactate (5 g/L) at pH 7.0. Optimum levels for salinity, temperature and inoculum size were predicted by NemrodW software as 165 g/L, 45 °C and 20%, respectively, under which conditions maximum current production of 6.98 ± 0.06 A/m² was experimentally validated. Metagenomic analysis of selected biofilms indicated a relative abundance of the two phyla Proteobacteria (from 85.96 to 89.47%) and Firmicutes (from 61.90 to 68.27%). At species level, enrichment of Psychrobacter aquaticus, Halanaerobium praevalens, Psychrobacter alimentaris, and Marinobacter hydrocarbonoclasticus on carbon-based electrodes was correlated with high current production, high salinity and high temperature. Members of the halothermophilic bacteria pool from HSCE, individually or in consortia, are candidates for designing halothermotolerant bioanodes applicable in the bioelectrochemical treatment of industrial wastewater at high salinity and temperature.

Bioremediation of wastewater through a quorum sensing triggered MFC: A sustainable measure for waste to energy concept

A mission for fast advancement has constrained us to unpredictably tap various natural assets. The reckless utilisation of fossil fuels led unmanageable wastes which have greatly affected our health and environment. Endeavours to address these difficulties have conveyed to the frontal area certain creative natural solutions particularly the utilisation of microbial digestion systems. In the previous two decades, the microbial fuel cell (MFC) innovation has caught the consideration of the researchers. The MFCs is a kind of bio-electrochemical framework with novel highlights, for example, power production, wastewater treatment, and biosensor applications. Lately, dynamic patterns in MFC inquire about on its synthetic, electrochemical, and microbiological perspectives have brought about its observable applications. The MFCs have begun as a logical interest, and in numerous regards, these remaining parts to be the situation. This is especially a result of the multidimensional uses of this eco-accommodating innovation. The innovation relies upon the electroactive microorganisms, prominently known as exoelectrogens. In the first place, it is the main innovation that can create energy out of waste, without the contribution of outer/extra energy. Modification of electrodes with nanomaterials, for example, gold nanoparticles and iron oxide nanoparticles or pretreatment techniques, for example, sonication and autoclave disinfection have indicated promising outcomes in improving MFC execution for power generation and wastewater treatment. The MFC innovation has been likewise explored for the remediation of different heavy metals and hazardous components, and to recognize the poisonous components in wastewater. What's more, the MFCs can be adjusted into microbial electrolysis cells to produce hydrogen energy from different natural sources. This article gives a thorough and cutting-edge appraisal of the novel magnitudes of the MFC.

A novel exoelectrogen from microbial fuel cell: Bioremediation of marine petroleum hydrocarbon pollutants

In the past decades, the microbial fuel cell (MFC) technology has caught the attention of the scientific community for its potential in transforming petroleum hydrocarbon (PHC) pollutants directly into electricity through microbial catalyzed anodic. The microbe was one of the most important factors that both influence MFCs and PHC degradation. Here we aimed to identify new microbes to expand the list of microbial species which are both electrogenic and diesel hydrocarbon degrading. In this text, we depicted a strain of microbe named E2, isolated from on the anode surface of MFC, and using diesel as sole carbon source. E2 exhibited electrochemical activity in cyclic voltammetry curve, implicating that it had electrogenic ability. E2 degraded about 50% diesel (3.26 g/L) in maximum during 8 days. Pyrosequencing of 16S rRNA gene of E2 revealed E2 was a sub-strain of Vibrio. Corresponding to salt and alkali tolerant properties of vibrio, the optimal condition for E2 in degrading diesel was 3%-4% in salinity, and pH 8-9 in mineral medium. Collectively, as a member of Gammaproteobacteria class, E2 was novel marine microbe both electricity generation and diesel degradation, which may attract its future application toward artificial microbial community construction in MFC in promoting the PHC pollution removal.

Thermophiles for biohydrogen production in microbial electrolytic cells

Thermophiles are promising options to use as electrocatalysts for bioelectrochemical applications including microbial electrolysis. They possess several interesting characteristics such as ability to catalyze a broad range of substrates at better rates and over a broad range of operating conditions, and better electrocatalysis/electrogenic activity over mesophiles. However, a very limited number of investigations have been carried out to explore the microbial reactions/pathways and the molecular mechanisms that contribute to better electrocatalysis/electrolysis in thermophiles. Here, we review the electroactive characteristics of thermophiles, their electron transfer mechanisms, and molecular insights behind the choice of thermophiles for bioelectrochemical/electrolytic processes.

Improved Microbial Electrolysis Cell Hydrogen Production by Hybridization with a TiO2 Nanotube Array Photoanode

A microbial electrolysis cell (MEC) consumes the chemical energy of organic material producing, in turn, hydrogen. This study presents a new hybrid MEC design with improved performance. An external TiO2 nanotube (TNT) array photoanode, fabricated by anodization of Ti foil, supplies photogenerated electrons to the MEC electrical circuit, significantly improving overall performance. The photogenerated electrons help to reduce electron depletion of the bioanode, and improve the proton reduction reaction at the cathode. Under simulated AM 1.5 illumination (100 mW cm−2) the 28 mL hybrid MEC exhibits a H2 evolution rate of 1434.268 ± 114.174 mmol m−3 h−1, a current density of 0.371 ± 0.000 mA cm−2 and power density of 1415.311 ± 23.937 mW m−2, that are respectively 30.76%, 34.4%, and 26.0% higher than a MEC under dark condition.

Specific enrichment of hyperthermophilic electroactive Archaea from deep-sea hydrothermal vent on electrically conductive support

While more and more investigations are done to study hyperthermophilic exoelectrogenic communities from environments, none have been performed yet on deep-sea hydrothermal vent. Samples of black smoker chimney from Rainbow site on the Atlantic mid-oceanic ridge have been harvested for enriching exoelectrogens in microbial electrolysis cells under hyperthermophilic (80 °C) condition. Two enrichments were performed in a BioElectrochemical System specially designed: one from direct inoculation of crushed chimney and the other one from inoculation of a pre-cultivation on iron (III) oxide. In both experiments, a current production was observed from 2.4 A/m² to 5.8 A/m² with a set anode potential of -0.110 V vs Ag/AgCl. Taxonomic affiliation of the exoelectrogen communities obtained on the electrode exhibited a specific enrichment of Archaea belonging to Thermococcales and Archeoglobales orders, even when both inocula were dominated by Bacteria.

Extremophiles for microbial-electrochemistry applications: A critical review

Extremophiles, notably archaea and bacteria, offer a good platform for treating industrial waste streams that were previously perceived as hostile to the model organisms in microbial electrochemical systems (MESs). Here we present a critical overview of the fundamental and applied biology aspects of halophiles and thermophiles in MESs. The current study suggests that extremophiles enable the MES operations under a seemingly harsh conditions imposed by the physical (pressure, radiation, and temperature) and geochemical extremes (oxygen levels, pH, and salinity). We highlight a need to identify the underpinning mechanisms that define the exceptional electrocatalytic performance of extremophiles in MESs.

Microbial fuel cells in saline and hypersaline environments: Advancements, challenges and future perspectives

This review is aimed to report the possibility to utilize microbial fuel cells for the treatment of saline and hypersaline solutions. An introduction to the issues related with the biological treatment of saline and hypersaline wastewater is reported, discussing the limitation that characterizes classical aerobic and anaerobic digestions. The microbial fuel cell (MFC) technology, and the possibility to be applied in the presence of high salinity, is discussed before reviewing the most recent advancements in the development of MFCs operating in saline and hypersaline conditions, with their different and interesting applications. Specifically, the research performed in the last 5years will be the main focus of this review. Finally, the future perspectives for this technology, together with the most urgent research needs, are presented.