Adsorption of p-nitrophenols (PNP) on microalgal biochar: Analysis of high adsorption capacity and mechanism

Potassium permanganate-modified eggshell biosorbent for the removal of diclofenac from liquid environment: adsorption performance, isotherm, kinetic, and thermodynamic analyses

This study assess how well diclofenac (DCF) can be separated from aqueous solution using potassium permanganate-modified eggshell biosorbent (MEB). The MEB produced was characterised using XRD, FTIR, and SEM. Batch experiments were conducted to examine and assess the impact of contact time, adsorbent dosage, initial concentration, and temperature on the adsorption capacity of the MEB in the DCF sequestration. The best parameters to obtained 95.64% DCF removal from liquid environment were 0.05 g MEB weight, 50 mg/L initial concentration, and 60 min contact time at room temperature. The maximum DCF sequestration capacity was found to be 159.57 mg/g with 0.05 g of MEB at 298 K. The adsorption isotherm data were more accurately predicted by the Freundlich model, indicating a process of heterogeneous multilayer adsorption. The results of the kinetic study indicated that the pseudo-second-order kinetic models best matched the experimental data. The findings revealed that the dynamic of DCF entrapment is largely chemisorption and diffusion controlled. Based on the values of thermodynamic parameters, the process is both spontaneous and endothermic. The primary processes of DCF sorption mechanism onto the MEB were chemical surface complexation, hydrogen bonding, π-π stacking, and electrostatic interactions. The produced MEB showed effective DCF separation from the aqueous solution and continued to have maximal adsorption capability even after five regeneration cycles. These findings suggest that MEB could be highly efficient adsorbent for the removal of DCF from pharmaceutical wastewater.

The Microalgae Chlamydomonas for Bioremediation and Bioproduct Production

The extensive metabolic diversity of microalgae, coupled with their rapid growth rates and cost-effective production, position these organisms as highly promising resources for a wide range of biotechnological applications. These characteristics allow microalgae to address crucial needs in the agricultural, medical, and industrial sectors. Microalgae are proving to be valuable in various fields, including the remediation of diverse wastewater types, the production of biofuels and biofertilizers, and the extraction of various products from their biomass. For decades, the microalga Chlamydomonas has been widely used as a fundamental research model organism in various areas such as photosynthesis, respiration, sulfur and phosphorus metabolism, nitrogen metabolism, and flagella synthesis, among others. However, in recent years, the potential of Chlamydomonas as a biotechnological tool for bioremediation, biofertilization, biomass, and bioproducts production has been increasingly recognized. Bioremediation of wastewater using Chlamydomonas presents significant potential for sustainable reduction in contaminants and facilitates resource recovery and valorization of microalgal biomass, offering important economic benefits. Chlamydomonas has also established itself as a platform for the production of a wide variety of biotechnologically interesting products, such as different types of biofuels, and high-value-added products. The aim of this review is to achieve a comprehensive understanding of the potential of Chlamydomonas in these aspects, and to explore their interrelationship, which would offer significant environmental and biotechnological advantages.

Efficient removal of p-nitrophenol from water by imidazolium ionic liquids functionalized cellulose microsphere

Removing p-nitrophenol (PNP) from water resources is crucial due to its significant threat to the environment and human health. Herein, imidazolium ionic liquids with short/long alkyl chain ([C2VIm]Br and [C8VIm]Br) modified cellulose microspheres (MCC-[C2VIm]Br and MCC-[C8VIm]Br) were synthesized by radiation method. To examine the impact of adsorbent hydrophilicity on adsorption performance, batch and column experiments were conducted for PNP adsorption. The MCC-[C2VIm]Br and MCC-[C8VIm]Br, with an equivalent molar import amount of ionic liquids, exhibited maximum adsorption capacities of 190.84 mg/g and 191.20 mg/g for PNP, respectively, and the adsorption equilibrium was reached within 30 min. Both adsorbents displayed exceptional reusability. Integrating the findings from XPS and FTIR analyses, and AgNO3 identification, the suggested adsorption mechanism posited that the adsorbents engaged with PNP through ion exchange, hydrogen bonds and π-π stacking. Remarkably, the hydrophobic MCC-[C8VIm]Br exhibited superior selectivity for PNP than the hydrophilic MCC-[C2VIm]Br, while had little effect on adsorption capacity and rate. MCC-[C8VIm]Br-2 with high grafting yield increased the adsorption capacity to 327.87 mg/g. Moreover, MCC-[C8VIm]Br-2 demonstrated efficient PNP removal from various real water samples, and column experiments illustrated its selective capture of PNP from groundwater. The promising adsorption performance indicates that MCC-[C8VIm]Br-2 holds potential for PNP removal from wastewater.

Synthesis, delineation and technological advancements of algae biochar for sustainable remediation of the emerging pollutants from wastewater-a review

The use of algae for value-added product and biorefining applications is enchanting attention among researchers in recent years due to its remarkable photosynthetic ability, adaptability, and capacity to accumulate lipids and carbohydrates. Algae biomass, based on its low manufacturing costs, is relatively renewable, sustainable, environmentally friendly and economical in comparison with other species. High production rate of algae provides a unique opportunity for its conversion to biochar with excellent physicochemical properties, viz. high surface area and pore volume, high adsorption capacity, abundant functional groups over surface, etc. Despite several potential algal-biochar, a detailed study on its application for removal of emerging contaminants from wastewater is limited. Therefore, this technical review is being carried out to evaluate the specific elimination of inorganic and organic pollutants from wastewater, with a view to assessing adsorption performances of biochar obtained from various algae species. Species-specific adsorption of emerging pollutants from wastewater have been discussed in the present review. The promising methods like pyrolysis, gasification, dry and wet torrefaction for the production of algae biochar are highlighted. The strategies include chemical and structural modifications of algae biochar for the removal of toxic contaminants have also been considered in the current work. The overall aim of this review is to confer about the synthesis, technological advancements, delineation and application of algae biochar for the treatment of wastewater.

Research advances on production and application of algal biochar in environmental remediation

Algae, comprising microalgae and macroalgae, have emerged as a promising feedstock for the production of functional biochar. Recently, the application of algal biochar in environmental remediation gains increasing attention. This review summarizes research advancements in the synthesis and application of algal biochar, a versatile and sustainable material for environmental remediation ranging from wastewater treatment to soil improvement. Algal biochar can be prepared by pyrolysis, microwave-assisted pyrolysis, and hydrothermal carbonization. Physical and chemical modifications have proven to be effective for improving biochar properties. Algal biochar is promising for removing diverse pollutants including heavy metals, organic pollutants, and microplastics. The role in soil improvement signifies a sustainable approach to enhancing soil structure, nutrient retention, and microbial activity. Research gaps are identified based on current understanding, necessitating further exploration into variations in biochar characteristics, the performance improvement, large-scale applications, and the long-term evaluation for environmental application. This review provides a better understanding of algal biochar as a sustainable and effective tool in environmental remediation.

Nanomaterials and biochar mediated remediation of emerging contaminants

The unrestricted release of various toxic substances into the environment is a critical global issue, gaining increased attention in modern society. Many of these substances are pristine to various environmental compartments known as contaminants/emerging contaminants (ECs). Nanoparticles and emerging sorbents enhanced remediation is a compelling methodology exhibiting great potential in addressing EC-related issues and facilitating their elimination from the environment, particularly those compounds that demonstrate eco-toxicity and pose considerable challenges in terms of removal. It provides a novel technique enabling the secure and sustainable removal of various ECs, including persistent organic compounds, microplastics, phthalate, etc. This extensive review presents a critical perspective on the current advancements and potential outcomes of nano-enhanced remediation techniques such as photocatalysis, nano-sensing, nano-enhanced sorbents, bio/phyto-remediation, which are applied to clean-up the natural environment. In addition, when dealing with residual contaminants, special attention is paid to both health and environmental implications; therefore, an evaluation of the long-term sustainability of nano-enhanced remediation methods has been considered. The integrated mechanical approaches were thoroughly discussed and presented in graphical forms. Thus, the critical evaluation of the integrated use of most emerging remediation technologies will open a new dimension in environmental safety and clean-up program.

Adsorption performance of Ni(II) by KOH-modified biochar derived from different microalgae species

Microalgae biochar is potential adsorbents to remove heavy metals from wastewater due to abundant functional groups, high porosity and wide sources, but performance is not fully developed since it depends on microalgae species attributing to distinct morphology and biomass compositions. Here, two microalgae species Chlorella Pyrenoidosa and Scenedesmus Obliquus were used for biochar preparation via KOH-modification, biochar properties and their influences on Ni(II) adsorption were investigated. Ni(II) adsorption performances responding to biochar properties and operating conditions were upgraded via progressive optimization and response surface methodology. Together, adsorption isotherms and kinetics were analyzed to obtain significant factors for Ni(II) removal. As results, 100 % of Ni(II) removal was achieved under 100 mg/L initial Ni(II) concentration as pH was higher than the biochar zero-charge point of 6.87 with low biochar dosage (0.5 g/L), which provides an efficient approach for heavy metal removal from wastewater with microalgae biochar.

A novel ZIF-8@IL-MXene/poly (N-isopropylacrylamide) nanocomposite hydrogel toward multifunctional adsorption

Phenols, dyes, and metal ions present in industrial wastewater can adversely affect the environment and leach biological carcinogens. Given that the current research focuses only on the removal of one or two of those categories. Herein, this work reports a novel ZIF-8@IL-MXene/Poly(N-isopropylacrylamide) (NIPAM) nanocomposite hydrogel that can efficiently and conveniently absorb and separate multiple pollutants from industrial wastewater. Ionic liquid (IL) was grafted onto MXene surfaces using a one-step method, and then incorporated into NIPAM monomer solutions to obtain the IL-MXene/PNIPAM composite hydrogel via in-situ polymerization. ZIF-8@IL-MXene/PNIPAM nanocomposite hydrogels were obtained by in-situ growth of ZIF-8 on the pore walls of composite hydrogels. As-prepared nanocomposite hydrogel showed excellent mechanical properties and can withstand ten repeated compressions without any damage, the specific surface area increased by 100 times, and the maximum adsorption capacities for p-nitrophenol (4-NP), crystal violet (CV), and copper ion (Cu2+) were 198.40, 325.03, and 285.65 mg g-1, respectively, at room temperature. The VPTTs of all hydrogels ranged from 33 to 35 °C, so the desorption process can be achieved in deionized water at 35-40 °C, and its adsorption capacities after five adsorption-desorption cycles decreased to 79%, 91%, and 29% for 4-NP, CV, and Cu2+, respectively. The adsorption data fitting results follow pseudo-second-order kinetics and Freundlich models, which is based on multiple interactions between the functional groups contained in hydrogels and adsorbent molecules. The hydrogel is the first to realize the high-efficiency adsorption of phenols, dyes and metal ions in industrial wastewater simultaneously, and the preparation process of hydrogels is environmentally friendly. Also, giving hydrogel multifunctional adsorption is beneficial to promote the development of multifunctional adsorption materials.

β-Glucosidase-producing microbial community in composting: Response to different carbon metabolic pressure influenced by biochar

Poor management of agricultural waste will cause a lot of environment pollution and the composting process is one of the most effective measures for resource reuse of agricultural waste. β-Glucosidase-producing microbial communities play a vital role in cellulose degradation during composting and regulate cellulase production via differentially expressed glucose/non-glucose tolerant β-glucosidase genes. Biochar is widely used as an amendment in compost to accelerate cellulose degradation during composting. However, Biochar-mediated impacts on β-glucosidase-producing microbial communities in compost are unclear. Here, different carbon metabolism pressures were set in natural and biochar compost to elucidate the regulation mechanism and interaction of the β-glucosidase microbial community. Results showed that the addition of biochar decreased the transcription of β-glucosidase genes and led to a reduction of β-glucosidase activity. Micromonospora and Cellulosimicrobium were the predominant functional communities determining cellulose degradation during biochar compost. Biochar addition strengthened the response of the functional microbial community to carbon metabolism pressure. And adding biochar altered the key β-glucosidase-producing microbial communities, influencing cellulase and the interaction between these communities to respond to the different carbon metabolic pressure of compost. Biochar also shifted the co-occurrence network of β-glucosidase-producing microbial community by changing the keystone species. Furthermore, co-occurrence network analysis revealed that high glucose decreased the complexity and stability of the functional microbial network. Most functional microorganisms from Streptomyces produce non-glucose tolerant β-glucosidase, which were the key bacterial communities affecting β-glucosidase activity in the non-glucose treatment. This study provides new insights into the response of functional microbial communities and the regulation of enzyme production during the transformation of cellulosic biomass.

The magic of algae-based biochar: advantages, preparation, and applications

Compared with other biomass sources, the use of algae as a raw material to prepare biochar (BC) has important advantages including safety, high yield and economy. The protein content of algae cells is as high as 3.2 mg DCW/L, and the graphitic-N and N-O functional groups generated by the pyrolysis of proteins could effectively activate free radicals. Combined with the generated pore structure, the electron transfer/exchange capability was enhanced, which is conducive to improving its catalytic performance. Algae as a natural N source, the manuscript analyzed the surface properties and physicochemical properties of algae-based BC, and investigated its degradation effect on organic/inorganic pollutants in wastewater. Subsequently, the effect of nitrogen-doped BC on the adsorption/catalysis capacity was discussed. Finally, the directed preparation of algae-based BC applied in different scenarios was summarized. Algae-based BC has the property of N doping, which broadens its application efficiency in the environmental field. Overall, this manuscript reviews how to achieve efficient utilization of algae-based BC in wastewater.

Effect of mechanical-chemical modification on adsorption of beryllium by calcite

The treatment of beryllium wastewater has become a major problem in industry. In this paper, CaCO3 is creatively proposed to treat beryllium-containing wastewater. Calcite was modified by an omnidirectional planetary ball mill by a mechanical-chemical method. The results show that the maximum adsorption capacity of CaCO3 for beryllium is up to 45 mg/g. The optimum treatment conditions were pH = 7 and the amount of adsorbent was 1 g/L, and the best removal rate was 99%. The concentration of beryllium in the CaCO3-treated solution is less than 5 μg/L, which meets the international emission standard. The results show that the surface co-precipitation reaction between CaCO3 and Be (II) mainly occurs. Two different precipitates are generated on the used-CaCO3 surface; one is the tightly connected Be (OH)2 precipitation, and the other is the loose Be2(OH)2CO3 precipitation. When the pH of the solution exceeds 5.5, Be2+ in the solution is first precipitated by Be (OH)2. After CaCO3 is added, CO32- will further react with Be3(OH)33+ to form Be2(OH)2CO3 precipitation. CaCO3 can be considered as an adsorbent with great potential to remove beryllium from industrial wastewater.

Influences of Mg-activation on sugarcane bagasse biochar characteristics and its PNP removing potentials from contaminated water

Biochar as a substitute eco-friendly and low-cost adsorbent is introduced for removing p-nitrophenol (PNP) one of the most important chemical contaminant that recognized as the main metabolite in many pesticides and an intermediate compound in many industries. Physicochemical characteristics of sugarcane bagasse biochar (SCBB) and its Mg-activation (ASCBB) generated at 500 °C for 30 min were investigate. Batch kinetic experiment was conducted (200 mg L-1 PNP) to evaluate sorption efficiency of both tested biochars. To study the reaction behavior of PNP adsorption on ASCBB, solution pH and isotherm experiment of different concentrations and dosages were as investigated. The results show that ASCBB had a higher biochar yield, ash content, pH, molar ratios (H/C and O/C), surface area, pore volume, mean pore diameter, and specific and thick wall structure than SCBB. The efficiency of ASCBB to remove PNP was higher than SCBB which reached 51.98% in the first 1 min., and pH 7 achieved the optimum adsorption. Pseudo-second-order model examination exhibited well fitted to explain the adsorption results depending on R2 value (1.00). The adsorption isotherm results were well described by the Elovich and Freundlich models depending on the R2, qm and n values, which means the formation of a multilayer of PNP on the ASCBB surface through the chemisorption reaction. The calculated qm (144.93 mg g-1) of 1g L-1 was relatively close with experimental value (142.03 mg g-1). The PNP adsorption mechanism on both biochar types was electrostatic attraction, hydrogen bonding, and π-π stacking interactions, which were confirmed by studying the surface reactions before and after adsorption. Overall, the current study provided a successful waste biomass-derived biochar as a conducive alternative eco-sorbent to eliminate p-nitrophenol from wastewater.

Biochar production and its environmental applications: Recent developments and machine learning insights

Biochar production through thermochemical processing is a sustainable biomass conversion and waste management approach. However, commercializing biochar faces challenges requiring further research and development to maximize its potential for addressing environmental concerns and promoting sustainable resource management. This comprehensive review presents the state-of-the-art in biochar production, emphasizing quantitative yield and qualitative properties with varying feedstocks. It discusses the technology readiness level and commercialization status of different production strategies, highlighting their environmental and economic impacts. The review focuses on integrating machine learning algorithms for process control and optimization in biochar production, improving efficiency. Additionally, it explores biochar's environmental applications, including soil amendment, carbon sequestration, and wastewater treatment, showcasing recent advancements and case studies. Advances in biochar technologies and their environmental benefits in various sectors are discussed herein.

Removal ibuprofen from aqueous solution by a noval Al-modified biochar

With the increase of organic emissions in production and human life, the pollution control of organic is now an urgent problem in the environmental field. In this study, hydrothermal carbonization rice husk-loaded Al-modified biochar (Al-BC) was synthesized, and the results of scanning electron microscopy could be used to determine that Al oxide composite was loaded on the surface of the material. The specific surface area was 57.049 m2 g-1, pore volume was 0.254 cm3 g-1, and average pore diameter was 8.922 nm for BC and 109.617 m2 g-1, 0.215 cm3 g-1, and 3.969 nm for Al-BC, respectively. The control effects of these two adsorption materials on organic pollutant ibuprofen (IBU) under different pH conditions were also investigated. The research results show that the adsorption capacity of Al-BC (30.24-1.48 mg g-1) is better than BC (19.98-0.92 mg g-1) at pH from 2 to 11. Solution pH plays a crucial role in IBU adsorption from organic solution. The Langmuir fitting results show that at pH = 7, the saturated adsorption capacity of IBU on BC could reach up to 18.68 mg g-1; the adsorption capacity on Al-BC was 60.49 mg g-1. The thermodynamic parameters indicate that the adsorption is spontaneous, endothermic, and increased disorder. The adsorption material prepared in this study could provide a reference for organic pollution control in water.

Optimization of biochar production from greywater grown polyculture microalgae using microwave pyrolysis

Biochar was produced from polyculture microalgae cultivated in greywater using microwave pyrolysis. The highest biochar yield and fixed carbon content of 49.9% and 68.7% were obtained at microwave power (P) of 800 W and reaction time (T) of 8.6 min. The developed quadratic models, 166.96 - 0.23P - 3.87 T - 3.49 x10-3PT + 1.73 x10-4P2 + 0.13 T2 and - 73.79 + 0.29P + 1.86 T - 1.80 x10-4P2 could predict biochar yield and fixed carbon content respectively with errors of 6.2 and 7.9%. The volatile matter (VM), fixed carbon (FC), and high heating value (HHV) of the biomass were 69.2%. 23.4% and 17.6 MJ/Kg, respectively. VM, FC, and HHV for biochar obtained at optimum conditions were 20.2%, 68.7%, and 28.3 MJ/Kg, respectively. The process had a net positive energy balance of 11.32 MJ/Kg and energy efficiency of 1.76. This study paves the way for biochar production from greywater-grown microalgae, contributing to waste valorization and energy sustainability.

Conversion of solid wastes and natural biomass for deciphering the valorization of biochar in pollution abatement: A review on the thermo-chemical processes

This overview addresses the formation of solid trash and the various forms of waste from a variety of industries, which environmentalists have embraced. The paper investigates the negative effects on the environment caused by unsustainable management of municipal solid trash as well as the opportunities presented by the formal system. This examination looks at the origins of solid waste as well as the typical treatment methods. Pyrolysis methods, feedstock pyrolysis, and lignocellulosic biomass pyrolysis were highlighted. Explain in detail the various thermochemical processes that take place during the pyrolysis of biomass. Due to its carbon content, low cost, accessibility, ubiquitousness, renewable nature, and environmental friendliness, biomass waste is a unique biochar precursor. This study looks at the different types of biomass waste that are available for treating wastewater. This study discussed a wide variety of reactors. Adsorption is the standard method that is used the most frequently to remove hazardous organic, dye, and inorganic pollutants from wastewater. These pollutants cause damage to the environment and water supplies, thus it is important to remove them. Adsorption is both simple and inexpensive to utilize. Temperature-dependent conversions explain the kinetic theories of biomaterial biochemical degradation. This article presents a review that explains how pyrolytic breakdown char materials can be used to reduce pollution and improve environmental management.

Comparative characterisation and phytotoxicity assessment of biochar and hydrochar derived from municipal wastewater microalgae biomass

Microalgae, originating from a tertiary treatment of municipal wastewater, is considered a sustainable feedstock for producing biochar and hydrochar, offering great potential for agricultural use due to nutrient content and carbon storage ability. However, there are risks related to contamination and these need to be carefully assessed to ensure safe use of material from wastewater microalgae. Therefore, this study compared the properties and phototoxicity of biochar and hydrochar produced via pyrolysis and hydrothermal carbonisation (HTC) of microalgae under different temperatures and residence times. While biochar promoted germination and seedling growth by up to 11.0% and 70.0%, respectively, raw hydrochar showed strong phytotoxicity, due to the high content of volatile matter. Two post-treatments, dichloromethane (DCM) washing and further pyrolysis, proved to be effective methods for mitigating phytotoxicity of hydrochar. Additionally, biochar had 35.8-38.6% fixed carbon, resulting in higher carbon sequestration potential compared to hydrochar.

Nanoporous carbons based on coordinate organic polymers as an efficient and eco-friendly nano-sorbent for adsorption of phenol from wastewater

The major part of water pollutants includes of organic such as phenolic pollutant, thus there are every hazardous to environment. Present work is a comparative onto surface chemistry and adsorptive characteristics of coordinate organic polymer (Cop-150) and nanoporous carbon (NPC) prepared using solvothermal method. New NPC was successfully synthesized to remove of phenol. FT-IR, XRD, XPS, SEM, TGA, and BET techniques have been used to characterization and confirm physicochemical variation during preparing Cop-150 and NPC. Box-Behnken response surface methodology (BBRSM) was used to optimize four important factors of the pH (2-10), contact time (1-40 min), temperature (25-60 °C), and initial concentration of phenol (5-50 mg L-1). To analyze the data obtained from the adsorption of phenol by synthesized adsorbents, four linear, 2FI, quadratic and cubic models were examined, which the quadratic model was recognized as the best model. To the NPC the equal adsorption capacity 500 mg g-1 is achieved at the initial concentration of phenol = 49.252 mg L-1, contact time = 15.738 min, temperature = 28.3 °C, and pH 7.042. On the other hand, the adsorption capacity for Cop-150 in pH 4.638, the contact time = 19.695 min, the temperature = 56.8 °C, and the initial concentration of phenol = 6.902 mg L-1 was equal to 50 mg g-1. The experimental data at different conditions were investigated by some famous kinetic and isotherm models, which among them, were corresponded to the pseudo-second-order kinetic model and the Langmuir isotherm. Moreover, based to result of thermodynamics to the both Cop-150 and NPC, the adsorption process is exothermic and spontaneous. According to results the Cop-150 and NPC could be used for up to four and five cycles without significantly reducing their performance, respectively.

Surface structures changes and biofilm communities development of degradable plastics during aging in coastal seawater

Biodegradable plastics (BPs) are a suitable alternative to conventional plastics. Still, their excessive or unplanned use may disrupt the abundance and community structure of the microbial population. To this end, a 58-day experiment in which biodegradable plastic objects, such as bags and boxes, were exposed to near-coastal seawater was conducted. They also assessed how they affected the diversity and organization of bacterial populations in seawater and on the surface of BPs products. It is evident that after the exposure time, both BP's bag and box products deteriorate in the ocean to varying degrees. The results of high-throughput sequencing of bacterial communities in seawater and those colonized on BPs products reveal significant differences in microbial community structures between seawater and BPs plastic samples. These suggest that the degradation of biodegradable plastics is shadowed by microorganisms and exposure time, while BP products influence the structural characteristics of microbial communities.

Adsorption Characteristics of Heavy Metals Pb2+ and Zn2+ by Magnetic Biochar Obtained from Modified AMD Sludge

Acid mine drainage (AMD) sludge can be used to prepare adsorbent materials for the removal of heavy metals in water, which is an effective means for its resource utilization. Magnetic modified biochar (MMB), which can be recovered by magnetic separation, was prepared from sludge generated from the carbonate rock neutralization treatment of AMD and rice straw agricultural waste. Unmodified biochar (UMB) was obtained from rice straw and chemically modified and treated by ultraviolet radiation to produce MMB. The Pb²⁺ and Zn²⁺ adsorption capacities of UMB and MMB were investigated. Simultaneously, the materials were characterized by SEM, FTIR, BET, and ZETA. The results showed that the specific surface area (130.89 m²·g^-1) and pore volume (0.22 m²·g^-1) of MMB were significantly increased compared to those of UMB (9.10 m²·g^-1 and 0.05 m²·g^-1, respectively). FTIR images showed that MMB was successfully loaded with Fe₃O₄. The adsorption process of Pb²⁺ and Zn²⁺ onto MMB was consistent with the Langmuir adsorption isotherm and second-order kinetic models, with maximum adsorption capacities of 329.65 mg·g^-1 and 103.67 mg·g^-1, respectively. In a binary system of Pb²⁺ and Zn²⁺, MMB preferentially binds Pb²⁺. The adsorption efficiencies of MMB reached >80% for Pb²⁺ and Zn²⁺.

Biochar production from microalgae: a new sustainable approach to wastewater treatment based on a circular economy

The generation of wastewater due to human activities are the main responsible for environmental problems. These problems are caused by the large amount of organic and inorganic pollutants related to the presence of pesticides, metals, pathogens, drugs and dyes. The photosynthetic treatment of effluents emerges as a sustainable and low-cost alternative for developing wastewater treatment systems based on a circular economy. Chemical compounds present in wastewater can be recovered and reused as a source of nutrients in microalgae cultivation to produce value-added bioproducts. The microalgal biomass produced in the cultivation with effluents has the potential to produce biochar. Biochar is carbon-rich charcoal that can be obtained by converting microalgae biomass through thermal decomposition of organic raw material under limited oxygen supply conditions. Pyrolysis, torrefaction, and hydrothermal carbonization are processes used for biochar synthesis. The application of microalgal biochar as an adsorbent material to remove several compounds present in effluents is an effective and fast treatment. This effectiveness is usually related to the unique physicochemical characteristics of the biochar, such as the presence of functional groups, ion exchange capacity, thermal stability, and high surface area, volume, and pore area. In addition, biochar can be reused in the adsorption process or applied in agriculture for soil correction. In this context, this review article describes the production, characterization, and use of microalgae biochar through a sustainable approach to wastewater treatment, emphasizing its potential in the circular economy. In addition, the article approaches the potential of microalgal biochar as an adsorbent material and its reuse after the adsorption of contaminants, as well as highlights the challenges and future perspectives on this topic.

The promoted degradation of biochar-adsorbed 2,4-dichlorophenol in the presence of Fe(III)

Organic pollutant degradation by biochar could be promoted by Fe because of the Fenton-like reaction. However, studies have also confirmed that reactive oxygen species (ROS) play only a limited role in organic pollutant degradation by biochar. Herein, we quantitatively identified 2,4-dichlorophenol (2,4-DCP) adsorption and degradation in Fe-biochar systems and obtained degradation (k₁) and adsorption rate constants (k₂) by two-compartment first-order kinetics modeling. The k₁ was approximately 7-10 times lower than the corresponding k₂ and the positive correlation between k₁ and k₂ illustrated that adsorption and degradation were kinetically associated. ROS quenching only slightly inhibited 2,4-DCP degradation. Chemicals with similar structures to ROS quenchers (without quenching ability) also inhibited 2,4-DCP degradation, probably because of the competition of the active degradation sites on biochars. Electrochemical analysis and pH-impact experiments further elucidated that 2,4-DCP underwent oxidation-dominated degradation in the adsorbed phase via direct electron transfer. Fe(III) obviously increased 2,4-DCP adsorption through cation bridging and enhanced electron density by Fe-O conjugations on the biochar surface, which facilitated subsequent degradation. This study emphasized the importance of degradation on the biochar solid phase and that a breakthrough of the mass transfer bottleneck of adsorption will greatly promote degradation.

Influence of hydrothermal carbonization conditions on the porosity, functionality, and sorption properties of microalgae hydrochars

Green microalgae is a possible feedstock for the production of biofuels, chemicals, food/feed, and medical products. Large-scale microalgae production requires large quantities of water and nutrients, directing the attention to wastewater as a cultivation medium. Wastewater-cultivated microalgae could via wet thermochemical conversion be valorised into products for e.g., water treatment. In this study, hydrothermal carbonization was used to process microalgae polycultures grown in municipal wastewater. The objective was to perform a systematic examination of how carbonization temperature, residence time, and initial pH affected solid yield, composition, and properties. Carbonization temperature, time and initial pH all had statistically significant effects on hydrochar properties, with temperature having the most pronounced effect; the surface area increased from 8.5 to 43.6 m² g^-1 as temperature was increased from 180 to 260 °C. However, hydrochars produced at low temperature and initially neutral pH generally had the highest capacity for methylene blue adsorption. DRIFTS analysis of the hydrochar revealed that the pH conditions changed the functional group composition, implying that adsorption was electrostatic interactions driven. This study concludes that un-activated hydrochars from wastewater grown microalgae produced at relatively low hydrothermal carbonization temperatures adsorb methylene blue, despite having low surface area.

Pine bark crosslinked to cyclodextrin for the adsorption of 2-nitrophenol from an aqueous solution

Adsorbents that are less expensive and more effective at removing organic micropollutants from wastewater have been developed through several approaches. Pine bark was treated with sodium hydroxide and then cross-linked to cyclodextrin using hexamethylene diisocyanate, in this study as an efficient adsorbent in the removal of 2-nitrophenol. FTIR, TGA and pHpzc analysis were used to characterize the biosorbent. The effects of pH, adsorbent mass, contact time and initial concentration on 2-nitrophenol removal was examined through batch adsorption studies. Pine bark crosslinked to cyclodextrin (PB-CD) surface functionalities was confirmed by FTIR analysis. It was discovered that solution pH, adsorbent mass, concentration and contact time all played a crucial role in the 2-nitrophenol uptake on PB-CD biosorbent and pine bark (PB) treated with sodium hydroxide. 2-Nitrophenol equilibrium was achieved with 0.05 g of adsorbents, with an initial concentration of 100–200 mg/dm3 at pH 5 after 60 min. The pseudo-second-order kinetic model and the Langmuir isotherm model significantly fitted the adsorption process. The Langmuir maximum capacities for PB and PB-CD were 47.36 mg/g and 77.82 mg/g, respectively. Overall, in the removal of 2-nitrophenol from an aqueous solution, PB-CD biosorbent is more cost-effective and efficient, in comparison with previously reported biosorbents in literature.

Organo-Montmorillonite Modified by Gemini Quaternary Ammonium Surfactants with Different Counterions for Adsorption toward Phenol

The discharge of industrial phenol pollutants causes great harm to the natural environment and human health. In this study, phenol removal from water was studied via the adsorption of Na-montmorillonite (Na-Mt) modified by a series of Gemini quaternary ammonium surfactants with different counterions [(C₁₁H₂₃CONH(CH₂)₂N⁺ (CH₃)₂(CH₂)₂ N⁺(CH₃)₂ (CH₂)₂NHCOC₁₁H₂₃·2Y^-, Y = CH₃CO₃^-, C₆H₅COO^- and Br^-, 12-2-12·2Y^-]. The results of the phenol adsorption indicated that MMt-12-2-12·2Br^-, MMt-12-2-12·2CH₃CO₃^- and MMt-12-2-12·2C₆H₅COO^- reached the optimum adsorption capacity, which was 115.110 mg/g, 100.834 mg/g and 99.985 mg/g, respectively, under the conditions of the saturated intercalation concentration at 2.0 times that of the cation exchange capacity (CEC) of the original Na-Mt, 0.04 g of adsorbent and a pH = 10. The adsorption kinetics of all adsorption processes were in good agreement with the pseudo-second-order kinetics model, and the adsorption isotherm was better modeled by Freundlich isotherm. Thermodynamic parameters revealed that the adsorption of phenol was a physical, spontaneous and exothermic process. The results also showed that the counterions of the surfactant had a certain influence on the adsorption performance of MMt for phenol, especially the rigid structure, hydrophobicity, and hydration of the counterions.

Adsorptive removal of beryllium by Fe-modified activated carbon prepared from lotus leaf

Lotus leaf was used as raw material to prepare HNO₃-activated carbon with 1.5:1 (HNO₃:lotus leaf) (wt:wt) impregnation. Then, the activated carbon was modified by Fe(NO₃)₃ to obtain Fe-activated carbon (Fe-AC). The adsorption test results show that Fe-AC maximum saturated adsorption capacity (Q_m) is 45.68 mg/g when the Fe(NO₃)₃ loading is 5% of the total activated carbon, pH = 6, and the temperature is 35 ℃. The adsorption effect of Fe-AC under neutral conditions is better than that under alkaline and acidic conditions. The modified activated carbon has better adsorption selectivity. The obtained material (Fe-AC) was characterized by N₂ adsorption-desorption isotherm, SEM, FT-IR, BET, XRD, XPS, and pH_pzc. The total pore volume, specific surface area, and zero charges of modified activated carbon were increased. The types of modified functional groups were reduced, and the iron reacted with the functional groups, providing ion exchange sites for the adsorption of beryllium. The adsorption thermodynamics showed that the adsorption process was spontaneous and endothermic. The adsorption mechanism of Fe-AC to beryllium is mainly chemical adsorption.

Limited Phosphorous Supply Improved Lipid Content of Chlorella vulgaris That Increased Phenol and 2-Chlorophenol Adsorption from Contaminated Water with Acid Treatment

Phenolic compounds are toxic and ominously present in industrial effluents, which can end up in water bodies, causing potential damage to living organisms. This study employed the dried biomass of freshwater green microalgae Chlorella vulgaris to remove phenol and 2-chlorophenol from an aqueous environment. C. vulgaris was grown under different phosphorus- (P) starved conditions, and biomass was treated with sulfuric acid. It was observed that reducing the P level enhanced the lipid content by 7.8 times while decreasing protein by 7.2 times. P-starved C. vulgaris dried biomass removed phenol and 2-chlorophenol by 69 and 57%, respectively, after 180 min from the contaminated water. Acid-treated P-starved C. vulgaris dried biomass removed phenol and 2-chlorophenol by 77 and 75%, respectively, after 180 min. Thus, an economical and eco-friendly P-starved and acid treated C. vulgaris biomass has better potential to remove phenol and 2-chlorophenol from contaminated ground water and industrial wastewater.

Recent progress in microalgae-derived biochar for the treatment of textile industry wastewater

Textile industry utilize a massive amount of dyes for coloring. The dye-containing effluent is released into wastewater along with heavy metals that are part of dye structure. The treatment of textile industry wastewater using conventional techniques (coagulation, membrane technique, electrolysis ion exchange, etc.) is uneconomical and less efficient (for a low concentration of pollutants). Moreover, most of these techniques produce toxic sludge, making them less environmentally friendly. Algae base industry is growing for food, cosmetics and energy needs. Algae biomass in unique compared to lignocellulosic biomass due to presence of various functional group on its surface and presence of various cations. These two characteristics are unique for biochar as a tool for environmental decontamination. Algae biomass contain functional groups and cations that can be effective for removal of organic contaminants (dyes) and heavy metals. Algae can be micro and macro and both have entirely different biomass composition which will lead to a synthesis of different biochar even under same synthesis process. This study reviews the recent progress in the development of an economically viable and eco-friendly approach for textile industry wastewater using algae biomass-derived absorbents. The strategy employed microalgal biochar to remove organic pollutants (dyes) and heavy metals from textile effluents by biosorption. This article discusses different methods for preparing algal biochar (pyrolysis, hydrothermal carbonization and torrefaction), and the adsorption capacity of biochar for dyes and heavy metals. Work on hydrothermal carbonization and torrefaction of microalgal biomass for biochar is limited. Variation in structural and functional groups changes on biochar compared to original microalgal biomass are profound in contract with lignocellulosic biomass. Existing Challenges, future goals, and the development of these technologies at the pilot level are also discussed.

Biochar colloids facilitate transport and transformation of Cr(VI) in soil: Active site competition coupling with reduction reaction

Biochar has been demonstrated as an efficient amendment for immobilizing contaminants. However, a certain number of micro/nano-scale particles are inevitably present in the fresh or aged biochar, which may facilitate the downward transport of contaminants along the soil profile, posing a detrimental impact on the groundwater. Herein, the effects of biochar colloids derived from wood chip and wheat straw at two temperatures (350 °C and 500 °C) on the transport and transformation of Cr(VI) in soil were investigated. All biochar colloids facilitated the transport of Cr(VI) in a loam clay Ultisol, which was attributed to the competition between biochar colloids and Cr(VI) for the available sorption sites on the soil surface. Wheat straw biochar colloids caused more transport of Cr(VI) than wood chip ones due to the more negative charge and higher polarity, which resulted in stronger electrostatic repulsion and competition with Cr(VI). It is soluble Cr(VI) that dominated the transport of Cr in the effluent solution, however, the particulate Cr(VI) could be reduced into Cr(III) before being carried by biochar colloids for co-transport. The 350 °C biochar colloids had higher electron donating capacities than 500 °C ones, resulting in more reduction of Cr(VI) and more co-transport as biochar colloids-associated Cr(III) in the effluent. Moreover, the more negatively charged 350 °C biochar colloids could also attach more soil Fe oxides, further facilitating the cotransport of Cr via the formation of a binary or ternary complex. Modeling showed the experimental-consistently results that biochar colloids caused 0.5-7.0 times faster transport of Cr(VI) than no biochar colloids in the long-term period. Our findings demonstrate that biochar colloids can enhance transport and transformation of Cr(VI) in soils, which arouse migration risk concern about in-situ remediation of Cr(VI)-contaminated soils by biochar.

Removal of p-nitrophenol from simulated sewage using MgCo-3D hydrotalcite nanospheres: capability and mechanism

4-Nitrophenol (4-NP) is an organic pollutant found in the wastewater discharged from coking and petrochemical industries, and it is highly toxic, persistent, and bioaccumulative. 4-NP is difficult to degrade and causes serious damage to human health and the ecological environment. In this study, MgCo-3D hydrotalcite nanospheres were synthesized via the hot solvent method using ZIF-67 as a template for 4-NP removal from wastewater. The composition and structure of MgCo-3D hydrotalcite nanospheres were characterized via X-ray diffraction (XRD), Scanning electron microscope (SEM), Transmission Electron Microscope (TEM), Fourier-transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), Energy Dispersive Spectroscopy (EDS), and BET analyses. The maximum adsorption capacity was 131.59 mg g-1 under the optimized conditions (pH = 7, t = 298 K, C 0 = 50 mg L-1, dose = 0.4 g L-1). The adsorption obeyed the Langmuir, Redlich-Peterson and Sips models and pseudo-second-order kinetics, and the adsorption activation energy was 29.4 kJ mol-1, indicating a monolayer physical adsorption phenomenon. The adsorption of 4-NP on the MgCo-3D hydrotalcite nanospheres mainly involved hydrogen bonding and electrostatic interactions. The nanospheres were regenerated using the hot-air purging method. After five adsorption-desorption cycles, the adsorption capacity reached 107.6 mg g-1, indicating the good regeneration performance of the MgCo-3D hydrotalcite nanospheres.

Preparation of lignin modified hyper-cross-linked nanoporous resins and their efficient adsorption for p-nitrophenol in aqueous solution and CO2 capture

A series of lignin modified hyper-cross-linked nanoporous resins (LMHCRs) had been synthesized from lignin, 4-vinylbenzyl chloride, and divinylbenzene by free radical polymerization reaction and following Friedel-Crafts reaction. The results indicated that Brunauer-Emmett-Teller surface area (S_BET) of LMHCRs decreased with different degrees compared with polymeric microspheres (HCRs) without adding lignin. With increasing the feeding amount of lignin, the S_BET of LMHCRs first increased and then decreased, and LMHCR-2 had larger S_BET (968.52 m²/g) and average pore size (D_A: 2.51 nm). Meanwhile, their contact angle continuously decreased from 92.1⁰ to 71.3⁰, indicating the enhanced polarity. Interestingly, the adsorption capacity of p-nitrophenol (PNP) on all LMHCRs were obviously higher than rhodamine B, and LMHCR-2 had the largest capacity ratio (3.780) of PNP to rhodamine B or other organic dyes at 298 K. Specifically, the Q_m of PNP on LMHCR-2 reached the largest value (492.1 mg/g) due to its suitable porosity and favorable surface polarity. LMHCR-2 also displayed excellent CO₂ capture (86.5 mg/g) at 273 K and 1 bar and good reusability. This study provided an efficient route to modify hyper-cross-linked resin by using the residual lignin, and showed the enhanced adsorption performance.

Removal of p-Nitrophenol from simulated sewage using steel slag: Capability and mechanism

The steel slag was investigated for the removal of p-nitrophenol (4-NP) from simulated sewage by batch adsorption and fixed-bed column absorption experiments. The results showed that the maximum adsorption capacity was 109.66 mg/g at 298 K, pH of 7, initial concentration 100 mg/L, and dose 0.8 g/L. The adsorption process fitted the Langmuir isothermal adsorption model and followed pseudo-second-order kinetic models, the activation energy of adsorption (Ea) was 10.78 kJ/mol, which indicated that the adsorption was single-molecule layer physical adsorption. The regeneration efficiency was still maintained at 84.20% after five adsorption-desorption cycles. The column adsorption experiments showed that the adsorption capacity of the Thomas model reached 13.69 mg/g and the semi-penetrating time of the Yoon-Nelson model was 205 min at 298 K. Fe₃O₄ was identified as the main adsorption site by adsorption energy calculation, XRD and XPS analysis. The FT-IR, Zeta potential, and ionic strength analysis indicated that the adsorption mechanism was hydrogen bonding interaction and electrostatic interaction. This work proved that steel slag could be utilized as a potential adsorbent for phenol-containing wastewater treatment.

The potential of biochar-photocatalytic nanocomposites for removal of organic micropollutants from wastewater

Biochar (BC)-photocatalyst nanocomposites have emerged as appealing water and wastewater treatment technology. Such nanocomposite materials benefit from the synergistic effect of adsorption and photocatalysis to attain improved removal of pollutants from water and wastewater. Under this review, three BC-based nanocomposite photocatalysts such as BC-TiO₂, BC-ZnO, and BC-spinel ferrites were considered. These nanocomposites acquire intrinsic properties to improve the practical limitations of the pristine BC and photocatalysts. The BC-based nanocomposites attained high photocatalytic activity, mechanical hardness, thermal stability, chemically non-reactive, magnetically permeable, reduced energy band gaps, improved reusability, and simplified recovery. Moreover, BC-based photocatalytic nanocomposites showed reduced recombination rates of the electron-hole pairs which are desirable for photocatalytic applications. However, the surface areas of the composites are usually smaller than that of the BC but higher than those of the pristine photocatalysts. Practically, the performances of the nanocomposites are much superior to those of the corresponding pristine components. This hybrid treatment technology is an emerging field and its industrial application is still at an early stage of the investigation. Therefore, exploring the full potential and practical applications of this technology is highly encouraging. Hence, this review focused on the critical evaluation of the most recent research on the synthesis, characterization, and photocatalytic treatment efficiency of the BC photocatalyst nanocomposites towards emerging pollutants in the aqueous medium. Moreover, the influence of various sources of BC feedstocks and their limitations on adsorption and photodegradation activities are discussed in detail. Finally, concluding remarks and future research directions are given to assist and shape the exploration of BC-based nanocomposite photocatalysts in water treatment.

Progress in microalgal mediated bioremediation systems for the removal of antibiotics and pharmaceuticals from wastewater

Worldwide demand for antibiotics and pharmaceutical products is continuously increasing for the control of disease and improvement of human health. Poor management and partial metabolism of these compounds result in the pollution of aquatic systems, leading to hazardous effects on flora, fauna, and ecosystems. In the past decade, the importance of microalgae in micropollutant removal has been widely reported. Microalgal systems are advantageous as their cultivation does not require additional nutrients: they can recover resources from wastewater and degrade antibiotics and pharmaceutical pollutants simultaneously. Bioadsorption, degradation, and accumulation are the main mechanisms involved in pollutant removal by microalgae. Integration of microalgae-mediated pollutant removal with other technologies, such as biodiesel, biochemical, and bioelectricity production, can make this technology more economical and efficient. This article summarizes the current scenario of antibiotic and pharmaceutical removal from wastewater using microalgae-mediated technologies.

Bioremediation of phenolic pollutants by algae - current status and challenges

Industrial production processes, especially petroleum processing, will produce high concentration phenolic wastewater. Traditional wastewater treatment technology is costly and may lead to secondary pollution. In order to avoid the adverse effects of incompletely treated phenolics, more advanced methods are required. Algae bioremediate phenolics through green pathways such as adsorption, bioaccumulation, biodegradation, and photodegradation. At the same time, the natural carbon fixation capacity of algae and its potential to produce high-value products make algal wastewater treatment technology economically feasible. This paper reviews the environmental impact of several types of phenolic pollutants in wastewater and different strategies to improve bioremediation efficiency. This paper focuses on the progress of algae removing phenols by different mechanisms and the potential of algae biomass for further biofuel production. This technology holds great promise, but more research on practical wastewater treatment at an industrial scale is needed in the future.

Modification of bioethanol production in an innovative pneumatic digester with non-thermal cold plasma detoxification

An anaerobic pneu-mechanical digester (PD) was designed to ferment lignocellulosic compounds. So, wheat and rice straws were pretreated using an ultrasound-acid, and then thermal-acid hydrolysis was conducted. Hydrolysis optimization was performed using the response surface method and the optimal points for time, temperature, and acid concentration were 45 min, 148.4 °C, and 2.04 % v/v, respectively. Cold plasma was then used as detoxification to reduce the amount of inhibitory compounds and acids. This method was capable of reducing the amounts of acetic acid, formic acid and furfural by 73, 83 and 68 % in hydrolyzed biomass, respectively. The biomass was fermented in a PD for 20 days and compared with a conventional digester (CD). The obtained results showed that the PD could increase the efficiency of bioethanol by 37 % in the detoxified state and 22 % in the non-detoxified state after 20 days of fermentation compared to the CD. Moreover, H₂S, CO and O₂ were measured during fermentation process. In PD, the amount of H₂S and O₂ was lower than CD, but CO was significantly higher in the PD.

Microalgal-based biochar in wastewater remediation: Its synthesis, characterization and applications

Microalgae are drawing attentions among researchers for their biorefinery use or value-added products. The high production rate of biomasses produced are attractive for conversion into volatile biochar. Torrefaction, pyrolysis and hydrothermal carbonization are the recommended thermochemical conversion techniques that could produce microalgal-based biochar with desirable physiochemical properties such as high surface area and pore volume, abundant surface functional groups, as well as functionality such as high adsorption capacity. The characterizations of the biochar significantly influence the mechanisms in adsorption of pollutants from wastewaters. Specific adsorption of the organic and inorganic pollutants from the effluent are reviewed to examine the adsorption capacity and efficiency of biochar derived from different microalgae species. Last but not least, future remarks over the challenges and improvements are discussed accordingly. Overall, this review would discuss the synthesis, characterization and application of the microalgal-based biochar in wastewater.

Okara and okara modified and functionalized with iron oxide nanoparticles for the removal of Microcystis aeruginosa and cyanotoxin

Eutrophicating compounds promote the growth of cyanobacteria, which has the potential of releasing toxic compounds. Alternative raw materials, such as residues, have been used in efficient adsorption systems in water treatment. The aim of the present study was to apply the residue Okara in its original form and modified by hydrolysis with immobilization of magnetic nanoparticles as an adsorbent. For the removal, the cyanobacteria Microcystis aeruginosa was chosen, as well as its secondary metabolites, L-amino acids leucine and arginine (MC-LR microcystin), from aqueous solutions. The adsorbents presented a negative surface charge, and the x-ray diffraction (DRX) outcomes successfully demonstrated the immobilization of iron oxide nanoparticles on the adsorbents. The adsorbent with the best result was the Okara hydrolyzed and functionalized with iron oxide, which showed a 47% (qe = 804.166 cel/g) and 85% (qe = 116.94 µg/L) removal for the cyanobacteria cells and chlorophyll-a, respectively. The kinetics study demonstrated a pseudo-first-order adsorption with maximal adsorption in 480 minutes, removing 761 µg/L of chlorophyll-a. In this trial, a low organic material removal has occurred, with a removal rate of 5% (qe = 0.024 mg/g) in the analysis of compounds in absorbance by ultraviolet light (UV) monitored by optical density determination in 254 nm (OD254). Nevertheless, the reaction system with the presence of organic material removed 53,28% of the MC-LR toxin, with adsorption capacities of 2.84 µg/L in a preliminary trial conducted for two hours, arising as a potential and alternative adsorbent with a capacity of removing cyanobacteria and cyanotoxin cells simultaneously.

Comparative role of microplastics and microalgae as vectors for chlorpyrifos bioacumulation and related physiological and immune effects in mussels

Microplastics (MP) are contaminants of concern per se, and also by their capacity to sorb dissolved chemicals from seawater, acting as vehicles for their transfer into marine organisms. Still, the role of MP as vehicles for contaminants and their associated toxicological effects have been poorly investigated. In this work we have compared the role of MP (high density polyethylene, HDPE, ≤22 μm) and of natural organic particles (microalgae, MA) as vehicle for chlorpyrifos (CPF), one of the most common pesticides found in river and coastal waters. We have compared the capacity of MP and MA to carry CPF. Then, the mussel Mytilus galloprovincialis has been exposed for 21 days to dissolved CPF, and to the same amount of CPF loaded onto MP and MA. The concentration of CPF in mussel' tissues and several physiological, energetics and immune parameters have been analyzed after 7 and 21 days of exposure. Results showed similar CPF accumulation in mussel exposed to MP and to MA spiked with CPF. This revealed that MP acted as vector for CPF in a similar way (or even to a lesser extent) than MA. After 21 days of exposure mussels exposed to MP spiked with CPF displayed similar or more pronounced biological effects than mussels exposed to dissolved CPF or to MA loaded with CPF. This suggested that the combined "particle" and "organic contaminant" effect produced an alteration on the biological responses greater than that produced by each stressor alone, although this was evident only after 3 weeks of exposure.

Engineered macroalgal and microalgal adsorbents: Synthesis routes and adsorptive performance on hazardous water contaminants

Colourants, micropollutants and heavy metals are regarded as the most notorious hazardous contaminants found in rivers, oceans and sewage treatment plants, with detrimental impacts on human health and environment. In recent development, algal biomass showed great potential for the synthesis of engineered algal adsorbents suitable for the adsorptive management of various pollutants. This review presents comprehensive investigations on the engineered synthesis routes focusing mainly on mechanical, thermochemical and activation processes to produce algal adsorbents. The adsorptive performances of engineered algal adsorbents are assessed in accordance with different categories of hazardous pollutants as well as in terms of their experimental and modelled adsorption capacities. Due to the unique physicochemical properties of macroalgae and microalgae in their adsorbent forms, the adsorption of hazardous pollutants was found to be highly effective, which involved different mechanisms such as physisorption, chemisorption, ion-exchange, complexation and others depending on the types of pollutants. Overall, both macroalgae and microalgae not only can be tailored into different forms of adsorbents based on the applications, their adsorption capacities are also far more superior compared to the conventional adsorbents.

A state-of-the-art review on algae pyrolysis for bioenergy and biochar production

Algae, as a feedstock with minimum land footprint, is considered a promising biomass for sustainable fuels, chemicals, and materials. Unlike lignocellulosic biomass, algae consist mainly of lipids, carbohydrates, and proteins. This review focusses on the bio-oil and biochar co-products of algae-pyrolysis and presents the current state-of-the-art in the pyrolysis technologies and key applications of algal biochar. Algal biochar holds potential to be a cost-effective fertilizer, as it has high P, N and other nutrient contents. Beyond soil applications, algae-derived biochar has many other applications, such as wastewater-treatment, due to its porous structure and strong ion-exchange capacity. High specific capacitance and stability also make algal biochar a potential supercapacitor material. Furthermore, algal biochar can be great catalysts (or catalyst supports). This review sheds light on a wide range of algae-pyrolysis related topics, including advanced-pyrolysis techniques and the potential biochar applications in soil amendment, energy storage, catalysts, chemical industries, and wastewater-treatment plants.

Novel insights into the adsorption of organic contaminants by biochar: A review

With rising concerns in the practical application of biochar for the remediation of environment influenced by various organic contaminants, a critical review to facilitate insights the crucial role that biochar has played in wastewater and polluted soil decontamination is urgently needed. This research therefore aimed to describe different intriguing dimensions of biochar interactions with organic contaminants, which including: (i) an introduction of biochar preparation and the related physicochemical properties, (ii) an overview of mechanisms and factors controlling the adsorption of organic contaminants onto biochar, and (iii) a summary of the challenges and an outlook of the further research needs in this issue. In the light of the survey consequences, the appearance of biochar indicates the potential in substituting the existing costly adsorbents, and it has been proved that biochar is one promising adsorbent for organic pollutants adsorption removal from water and soil. However, some research gaps, such as dynamic adsorption, potential environmental risks, interactions between biochar and soil microbes, novel modification techniques, need to be further investigated to facilitate its practical application. This research will be conductive to better understanding the adsorption removal of organic contaminants by biochar.

The effect of carbonization temperature on the capacity and mechanisms of Pb(II) adsorption by microalgae residue-derived biochar

This study investigated the adsorption characterizations and mechanisms of lead (Pb) on biochar-derived microalgae residue (MB) produced at different pyrolytic temperatures. Six different MB samples were prepared from Chlorella sp. (CB) and Spirulina sp. (SB) in the temperature range of 200-600 ℃, and microalgae residue power (MP) was used as a control. The effect of pH, adsorption kinetics and isotherms were studied for the different MBs, and a chemical analysis of Pb²⁺-loaded MP and MB was performed by SEM-EDS, XRD, XPS, FTIR, and Boehm titration. The results showed that Pb²⁺ adsorption on MP and MB was a monolayer chemical adsorption process. Precipitation with minerals, metal ion exchange, oxygen/nitrogen-containing functional groups (OFGs/NFGs), and coordination of Pb²⁺ with π electrons jointly contributed to Pb²⁺ adsorption on MP and MB. More specifically, the contribution of each mechanism depended on the pyrolytic temperature. The contribution of surface complexation and ion exchange decreased with increasing pyrolytic temperature due to the loss of OFGs/NFGs and decreasing metal ion content, while the contribution of precipitation and Pb²⁺-π interaction significantly increased. Overall, precipitation with minerals and ion exchange dominated Pb²⁺ adsorption on MP and MB, which accounted for 65.20-74.40% of the total adsorption capacity. Surface precipitation contributed to a maximum adsorption capacity for high-temperature CB and SB (600 ℃) of up to 131.41 mg/g and 154.56 mg/g, respectively. In conclusion, MB adsorbents are a promising material for the remediation of heavy metal-bearing aquatic environments.

Unraveling the mechanism of efficient adsorption of riboflavin onto activated biochar derived from algal blooms

Riboflavin is commercially produced primarily by bio-fermentation. Nonetheless, purification and separation are particularly complex and costly. Adsorption from the fermentation liquor is an alternative riboflavin separation technology during which a cost-efficient adsorbent is highly desired. In this study, a low-cost activated algal biomass-derived biochar (AABB) was applied as an adsorbent to efficiently adsorb riboflavin from an aqueous solution. The adsorption capacity of riboflavin on AABB increased with the increase in pyrolysis temperature and initial riboflavin concentration. The adsorption isotherms were well described by the Freundlich and Langmuir models. The AABB displayed excellent adsorption performance and its maximum adsorption capacity was 476.9 mg/g, which was 6.8, 6.8, and 5.2 times higher than that of laboratory-prepared activated rape straw biochar, activated broadbean shell biochar and commercial activated carbon, respectively, which was mainly ascribed to its larger specific surface area and abundant functional groups. The mass transfer model results showed that mass transfer resistance was dependent on both the film mass transfer and porous diffusion. Raman and Fourier transform-infrared spectra confirmed the presence of π-π interactions and hydrogen bonding between riboflavin and the AABB. The adsorption of riboflavin onto AABB was a spontaneous process, which was dominated by van der Waals forces. These results will be beneficial for developing effective riboflavin recovery technologies and simultaneously utilizing waste algal blooms.

Sequestration of p-nitrophenol from liquid phase by poly(acrylonitrile-co-acrylic acid) containing thioamide group

In this paper, the adsorptive performance of synthesized thiourea (TU) modified poly(acrylonitrile-co-acrylic acid) (TU-P(AN-co-AA)) polymeric adsorbent for capturing p-nitrophenol (PNP) from aqueous solution was investigated. TU-P(AN-co-AA) was synthesized via the redox polymerization method with acrylonitrile (AN) and acrylic acid (AA) as the monomers, then modified chemically with thiourea (TU). Characterization analysis with Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), elemental microanalysis for CHNS, zeta potential measurement, Brunauer-Emmett-Teller (BET) surface analysis and thermal analyses were carried out to determine the morphology and physico-chemical properties of the synthesized polymer. The characterization results indicated successful surface modification of polymer with TU. The performance of TU-P(AN-co-AA) for the removal of PNP was investigated under various experimental parameters (adsorbent dosage, initial adsorbate concentration, contact time and temperature). The results demonstrated that the Freundlich isotherm model and pseudo-second-order kinetic model best described the equilibrium and kinetic data, respectively. Thermodynamic studies showed that the uptake of PNP by TU-P(AN-co-AA) was spontaneous and exothermic in nature. The results of the regeneration studies suggested that the TU-P(AN-co-AA) polymer is a reusable adsorbent with great potential for removing PNP from wastewater.