Strategies to control biological contaminants during microalgal cultivation in open ponds

Cell morphology engineering enhances grazing resistance of Synechococcus elongatus PCC 7942 for non-sterile large-scale cultivation

In the practical scale of cyanobacterial cultivation, the golden algae Poterioochromonas malhamensis is a well-known predator that causes devastating damage to the culture, referred to as pond crash. The establishment and maintenance of monoculture conditions are ideal for large-scale cultures. However, this is a difficult challenge because microbial contamination is unavoidable in practical-scale culture facilities. In the present study, we unexpectedly observed the pond crash phenomenon during the pilot-scale cultivation of Synechococcus elongatus PCC 7942 using a 100-L photobioreactor. This was due to the contamination with P. malhamensis, which probably originated from residual fouling. Interestingly, we found that S.elongatus PCC 7942 can alter its morphological structure when subjected to continuous grazing pressure from predators, resulting in cells that were more than 100 times longer than those of the wild-type strain. These hyper-elongated S.elongatus PCC 7942 cells had mutations in the genes encoding FtsZ or Ftn2 which are involved in bacterial cell division. Importantly, the elongated phenotype remained stable during cultivation, enabling S.elongatus PCC 7942 to thrive and resist grazing. The cultivation of the elongated S.elongatus PCC 7942 mutant strain in a 100-L pilot-scale photobioreactor under non-sterile conditions resulted in increased cyanobacterial biomass without encountering pond crash. This study demonstrates an efficient strategy for cyanobacterial cell culture in practical-scale bioreactors without the need for extensive decontamination or sterilization of the growth medium and culture facility, which can contribute to economically viable cultivation and bioprocessing of microalgae.

Exploring the dynamics of algae-associated microbiome during the scale-up process of Tetraselmis sp. microalgae: A metagenomics approach

Microalgae have become a key source of valuable compounds, promoting commercial scale applications. However, biological contamination is one of the most critical problems associated with large scale algal production, especially in open systems such as raceway ponds. The current research is the first to assess the effectiveness of open raceway ponds in maintaining a pure culture of Tetraselmis sp., starting from 20 L culture up to 10,000 L culture. Microbial profiling of each successive stage revealed lower abundance of eukaryotic organisms, whereas bacterial abundance increased notably resulting in a significant decrease in Tetraselmis sp. abundance. Furthermore, several bacteria with algae growth-promoting properties were found throughout the various culture stages including Balneola, Roseovarius, and Marinobacter. However, some algae-suppressive bacteria were evidenced at later stages such as Ulvibacter, Aestuariicoccus, and Defluviimonas. Overall, due to the increasing bacterial concentration, considerations limiting bacterial contamination need to be taken.

Harnessing genetic engineering to drive economic bioproduct production in algae

Our reliance on agriculture for sustenance, healthcare, and resources has been essential since the dawn of civilization. However, traditional agricultural practices are no longer adequate to meet the demands of a burgeoning population amidst climate-driven agricultural challenges. Microalgae emerge as a beacon of hope, offering a sustainable and renewable source of food, animal feed, and energy. Their rapid growth rates, adaptability to non-arable land and non-potable water, and diverse bioproduct range, encompassing biofuels and nutraceuticals, position them as a cornerstone of future resource management. Furthermore, microalgae's ability to capture carbon aligns with environmental conservation goals. While microalgae offers significant benefits, obstacles in cost-effective biomass production persist, which curtails broader application. This review examines microalgae compared to other host platforms, highlighting current innovative approaches aimed at overcoming existing barriers. These approaches include a range of techniques, from gene editing, synthetic promoters, and mutagenesis to selective breeding and metabolic engineering through transcription factors.

Biotechnologies for bulk production of microalgal biomass: from mass cultivation to dried biomass acquisition

Microalgal biomass represents a sustainable bioresource for various applications, such as food, nutraceuticals, pharmaceuticals, feed, and other bio-based products. For decades, its mass production has attracted widespread attention and interest. The process of microalgal biomass production involves several techniques, mainly cultivation, harvesting, drying, and pollution control. These techniques are often designed and optimized to meet optimal growth conditions for microalgae and to produce high-quality biomass at acceptable cost. Importantly, mass production techniques are important for producing a commercial product in sufficient amounts. However, it should not be overlooked that microalgal biotechnology still faces challenges, in particular the high cost of production, the lack of knowledge about biological contaminants and the challenge of loss of active ingredients during biomass production. These issues involve the research and development of low-cost, standardized, industrial-scale production equipment and the optimization of production processes, as well as the urgent need to increase the research on biological contaminants and microalgal active ingredients. This review systematically examines the global development of microalgal biotechnology for biomass production, with emphasis on the techniques of cultivation, harvesting, drying and control of biological contaminants, and discusses the challenges and strategies to further improve quality and reduce costs. Moreover, the current status of biomass production of some biotechnologically important species has been summarized, and the importance of improving microalgae-related standards for their commercial applications is noted.

Folate-mediated one-carbon metabolism as a potential antifungal target for the sustainable cultivation of microalga Haematococcus pluvialis

BACKGROUND

Microalgae are widely considered as multifunctional cell factories that are able to transform the photo-synthetically fixed CO₂ to numerous high-value compounds, including lipids, carbohydrates, proteins and pigments. However, contamination of the algal mass culture with fungal parasites continues to threaten the production of algal biomass, which dramatically highlights the importance of developing effective measures to control the fungal infection. One viable solution is to identify potential metabolic pathways that are essential for fungal pathogenicity but are not obligate for algal growth, and to use inhibitors targeting such pathways to restrain the infection. However, such targets remain largely unknown, making it challenging to develop effective measures to mitigate the infection in algal mass culture.

RESULTS

In the present study, we conducted RNA-Seq analysis for the fungus Paraphysoderma sedebokerense, which can infect the astaxanthin-producing microalga Haematococcus pluvialis. It was found that many differentially expressed genes (DEGs) related to folate-mediated one-carbon metabolism (FOCM) were enriched in P. sedebokerense, which was assumed to produce metabolites required for the fungal parasitism. To verify this hypothesis, antifolate that hampered FOCM was applied to the culture systems. Results showed that when 20 ppm of the antifolate co-trimoxazole were added, the infection ratio decreased to ~ 10% after 9 days inoculation (for the control, the infection ratio was 100% after 5 days inoculation). Moreover, application of co-trimoxazole to H. pluvialis mono-culture showed no obvious differences in the biomass and pigment accumulation compared with the control, suggesting that this is a potentially algae-safe, fungi-targeted treatment.

CONCLUSIONS

This study demonstrated that applying antifolate to H. pluvialis culturing systems can abolish the infection of the fungus P. sedebokerense and the treatment shows no obvious disturbance to the algal culture, suggesting FOCM is a potential target for antifungal drug design in the microalgal mass culture industry.

Fine resolution analysis of bacterial communities associated with Neochloris oleoabundans culture and insights into terpenes as contamination control agents

Biological contamination is one of the main bottlenecks in microalgae production, reducing quality and productivity and sometimes leading to the complete loss of the cultures. Selecting terpenes can be a pathway toward eco-friendly contamination control in microalgae cultures. This work evaluated the presence of bacterial contaminants in N. oleoabundans cultures through HTS and 16 S analysis and their susceptibility to six natural terpenes (α-pinene, β-pinene, limonene, trans-cinnamaldehyde, linalool, and eugenol). The principal phyla identified were Proteobacteria, Bacteroidetes, and Actinobacteria, and based on these data, 89 bacterial isolates of seven genera were obtained (36 Aureimonas sp., 27 Microbacterium sp., 5 Pseudomonas sp., 9 Bacillus sp., 14 Shinella sp., 1 Brevundimonas sp., and 1 Exiguobacterium sp.) at 25ºC in the presence of light. It was possible to observe that Beta-pinene 50 mg L^- 1 only inhibited Bacillus sp. In contrast, Alpha-pinene, Linalool, and Trans-cinnamaldehyde, at a concentration of 6.25 mg L^- 1 efficiently inhibited most isolates. The inhibition percentages found were 79-99%.

Algal biomass to biohydrogen: Pretreatment, influencing factors, and conversion strategies

Hydrogen has gained attention as an alternative source of energy because of its non-polluting nature as on combustion it produces only water. Biological methods are eco-friendly and have benefits in waste management and hydrogen production simultaneously. The use of algal biomass as feedstock in dark fermentation is advantageous because of its low lignin content, high growth rate, and carbon-fixation ability. The major bottlenecks in biohydrogen production are its low productivity and high production costs. To overcome these issues, many advances in the area of biomass pretreatment to increase sugar release, understanding of algal biomass composition, and development of fermentation strategies for the complete recovery of nutrients are ongoing. Recently, mixed substrate fermentation, multistep fermentation, and the use of nanocatalysts to improve hydrogen production have increased. This review article evaluates the current progress in algal biomass pretreatment, key factors, and possible solutions for increasing hydrogen production.

A review on the sustainable procurement of microalgal biomass from wastewaters for the production of biofuels

The feasibility of microalgal biomass as one of the most promising and renewable sources for the production of biofuels is being studied extensively. Microalgal biomass can be cultivated under photoautotrophic, heterotrophic, photoheterotrophic, and mixotrophic cultivation conditions. Photoautotrophic cultivation is the most common way of microalgal biomass production. Under mixotrophic cultivation, microalgae can utilize both organic carbon and CO2 simultaneously. Mixotrophic cultivation depicts higher biomass productivity as compared to photoautotrophic cultivation. It is evident from the literature that mixotrophic cultivation yields higher quantities of polyunsaturated fatty acids as compared to that photoautotrophic cultivation. In this context, for economical biomass production, the organic carbon of industrial wastewaters can be valorized for the mixotrophic cultivation of microalgae. Following the way, contaminants' load of wastewaters can be reduced while concomitantly producing highly productive microalgal biomass. This review focuses on different aspects covering the sustainable cultivation of different microalgal species in different types of wastewaters.

Fungal Contamination in Microalgal Cultivation: Biological and Biotechnological Aspects of Fungi-Microalgae Interaction

In the last few decades, the increasing interest in microalgae as sources of new biomolecules and environmental remediators stimulated scientists’ investigations and industrial applications. Nowadays, microalgae are exploited in different fields such as cosmeceuticals, nutraceuticals and as human and animal food supplements. Microalgae can be grown using various cultivation systems depending on their final application. One of the main problems in microalgae cultivations is the possible presence of biological contaminants. Fungi, among the main contaminants in microalgal cultures, are able to influence the production and quality of biomass significantly. Here, we describe fungal contamination considering both shortcomings and benefits of fungi-microalgae interactions, highlighting the biological aspects of this interaction and the possible biotechnological applications.

Growth Performance, Biochemical Composition and Nutrient Recovery Ability of Twelve Microalgae Consortia Isolated from Various Local Organic Wastes Grown on Nano-Filtered Pig Slurry

This paper demonstrated the growth ability of twelve algae-microbial consortia (AC) isolated from organic wastes when a pig slurry-derived wastewater (NFP) was used as growth substrate in autotrophic cultivation. Nutrient recovery, biochemical composition, fatty acid and amino acid profiles of algae consortia were evaluated and compared. Three algae-microbial consortia, i.e., a Chlorella-dominated consortium (AC_1), a Tetradesmus and Synechocystis co-dominated consortium (AC_10), and a Chlorella and Tetradesmus co-dominated consortium (AC_12) were found to have the best growth rates (µ of 0.55 ± 0.04, 0.52 ± 0.06, and 0.58 ± 0.03 d⁻¹, respectively), which made them good candidates for further applications. The ACs showed high carbohydrates and lipid contents but low contents of both proteins and essential amino acids, probably because of the low N concentration of NFP. AC_1 and AC_12 showed optimal ω6:ω3 ratios of 3.1 and 3.6, which make them interesting from a nutritional point of view.

Effective contamination control strategies facilitating axenic cultivation of Haematococcus pluvialis: Risks and challenges

With industrialization, anthropogenic mishandlings have resulted in the discharge of abundant amount of CO₂ into the atmosphere. This has triggered an unnatural warming that has dramatically increased the Earth's temperature in a short duration. This problem can be addressed by the biological conversion of CO₂; several studies have been conducted using H. pluvialis culture that produces high value-added materials, such as astaxanthin and omega-3 fatty acids. However, although H. pluvialis has a high market value, the market size is quite small. Because H. pluvialis cells are susceptible to contamination due to its slow growth rate, hence large-scale culture of H. pluvialis without reliable contamination control strategies poses significant risks. This review comprehensively discusses the contamination that occurs during the culturing of H. pluvialis in various culture systems under different culture conditions. The review also discusses the strategies in controlling the biotic contaminants, such as bacteria and fungi.

Potential to resist biological contamination in marine microalgae culture: Effect of extracellular substances of Nannochloropsis oceanica on population growth of Euplotes vannus and other protozoa

The commercially important marine microalgae Nannochloropsis oceanica is easily ingested by protozoan predators during large-scale cultivation. However, investigations into the effect of microalgae on the growth of protozoa are scant. A feeding experiment was conducted with Euplotes vannus grazing on different concentrations of N. oceanica. The ciliate population was significantly lower in the high concentration of algae than that in the low or medium algal concentration treatments. The density of ciliates cultured in algae filtrate media was significantly lower than that in lysate media and the blank control. Furthermore, the algal cell filtrate was added to three other protozoan populations, and they all gradually lost their ability to move and their body shape changed. This study investigated the interactions between N. oceanica and protozoan predators and provides insight on using microalgal extracellular substances to control biological contamination in the future.

A Review of Energy Consumption in the Acquisition of Bio-Feedstock for Microalgae Biofuel Production

Microalgae biofuel is expected to be an ideal alternative to fossil fuels to mitigate the effects of climate change and the energy crisis. However, the production process of microalgae biofuel is sometimes considered to be energy intensive and uneconomical, which limits its large-scale production. Several cultivation systems are used to acquire feedstock for microalgal biofuels production. The energy consumption of different cultivation systems is different, and the concentration of culture medium (microalgae cells contained in the unit volume of medium) and other properties of microalgae vary with the culture methods, which affects the energy consumption of subsequent processes. This review compared the energy consumption of different cultivation systems, including the open pond system, four types of closed photobioreactor (PBR) systems, and the hybrid cultivation system, and the energy consumption of the subsequent harvesting process. The biomass concentration and areal biomass production of every cultivation system were also analyzed. The results show that the flat-panel PBRs and the column PBRs are both preferred for large-scale biofuel production for high biomass productivity.

ptxD/Phi as alternative selectable marker system for genetic transformation for bio-safety concerns: a review

Antibiotic and herbicide resistance genes are the most common marker genes for plant transformation to improve crop yield and food quality. However, there is public concern about the use of resistance marker genes in food crops due to the risk of potential gene flow from transgenic plants to compatible weedy relatives, leading to the possible development of “superweeds” and antibiotic resistance. Several selectable marker genes such as aph, nptII, aaC3, aadA, pat, bar, epsp and gat, which have been synthesized to generate transgenic plants by genetic transformation, have shown some limitations. These marker genes, which confer antibiotic or herbicide resistance and are introduced into crops along with economically valuable genes, have three main problems: selective agents have negative effects on plant cell proliferation and differentiation, uncertainty about the environmental effects of many selectable marker genes, and difficulty in performing recurrent transformations with the same selectable marker to pyramid desired genes. Recently, a simple, novel, and affordable method was presented for plant cells to convert non-metabolizable phosphite (Phi) to an important phosphate (Pi) for developing cells by gene expression encoding a phosphite oxidoreductase (PTXD) enzyme. The ptxD gene, in combination with a selection medium containing Phi as the sole phosphorus (P) source, can serve as an effective and efficient system for selecting transformed cells. The selection system adds nutrients to transgenic plants without potential risks to the environment. The ptxD/Phi system has been shown to be a promising transgenic selection system with several advantages in cost and safety compared to other antibiotic-based selection systems. In this review, we have summarized the development of selection markers for genetic transformation and the potential use of the ptxD/Phi scheme as an alternative selection marker system to minimize the future use of antibiotic and herbicide marker genes.

Controlling of two destructive zooplanktonic predators in Chlorella mass culture with surfactants

BACKGROUND

Predatory flagellates and ciliates are two common bio-contaminants which frequently cause biomass losses in Chlorella mass culture. Efficient and targeted ways are required to control these contaminations in Chlorella mass cultivation aiming for biofuel production especially.

RESULTS

Five surfactants were tested for its ability to control bio-contaminations in Chlorella culture. All five surfactants were able to eliminate the contaminants at a proper concentration. Particularly the minimal effective concentrations of sodium dodecyl benzene sulfonate (SDBS) to completely eliminate Poterioochromonas sp. and Hemiurosomoida sp. were 8 and 10 mg L^-1, respectively, yet the photosynthesis and viability of Chlorella was not significantly affected. These results were further validated in Chlorella mass cultures in 5, 20, and 200 m² raceway ponds.

CONCLUSIONS

A chemical method using 10 mg L^-1 SDBS as pesticide to control predatory flagellate or ciliate contamination in Chlorella mass culture was proposed. The method helps for a sustained microalgae biomass production and utilization, especially for biofuel production.

Sources and Consequences of Groundwater Contamination

Groundwater contamination is a global problem that has a significant impact on human health and ecological services. Studies reported in this special issue focus on contaminants in groundwater of geogenic and anthropogenic origin distributed over a wide geographic range, with contributions from researchers studying groundwater contamination in India, China, Pakistan, Turkey, Ethiopia, and Nigeria. Thus, this special issue reports on the latest research conducted in the eastern hemisphere on the sources and scale of groundwater contamination and the consequences for human health and the environment, as well as technologies for removing selected contaminants from groundwater. In this article, the state of the science on groundwater contamination is reviewed, and the papers published in this special issue are summarized in terms of their contributions to the literature. Finally, some key issues for advancing research on groundwater contamination are proposed.

Various potential techniques to reduce the water footprint of microalgal biomass production for biofuel-A review

Due to their rapid growth rates, high lipid productivity, and ability to synthesize value-added products, microalgae are considered as the potential biofuel feedstocks. However, among the several bottlenecks that are hindering the commercialization of microalgal biofuel synthesis, the issue of high water consumption is the least explored. This analysis, therefore, examines the factors that decide water use for the production of microalgae biofuel. Microalgae biodiesel water footprint varies from 3.5 to 3726 kg of water per kg of biodiesel. The study further investigates the cause for large variability in the estimation of the water footprint for microalgae fuel. Various strategies, including the reuse of harvested water, the use of high density cultivation that could be adopted for low water consumption in microalgal biofuel production are discussed. Specifically, the review identified a reciprocal relationship between biomass productivity and water footprint. On the basis of which the review emphasizes the significance of high density cultivation, which can be inexpensive and feasible relative to other water-saving techniques. With the setback of water scarcity due to the rapid industrialization in developing countries, the implementation of the cultivation system with a focus on minimizing the water consumption is inevitable for a successful large scale microalgal biofuel production.

Overcoming the Biological Contamination in Microalgae and Cyanobacteria Mass Cultivations for Photosynthetic Biofuel Production

Microalgae and cyanobacteria have shown significant potential for the development of the next biofuels innovation because of their own characteristics as photosynthetic microorganisms. However, it is confronted with a lot of severe challenges on the economic scaling-up of the microalgae- and cyanobacteria-based biofuels production. One of these major challenges is the lack of a reliable preventing and controlling culture system of biological contamination, which can attack the cell growth or product accumulation causing crashing effects. To increase the commercial viability of microalgae- and cyanobacteria-based biofuels production, overcoming the biological contaminations should be at the top of the priority list. Here, we highlight the importance of two categories of biological contaminations and their controlling strategies in the mass cultivations of microalgae and cyanobacteria, and outline the directions that should be exploited in the future.

Remediation of Aquaculture Wastewater Using the Microalga Chlorella sorokiniana

The aquaculture industry requires solutions to several environmental challenges in order to become sustainable, including adequate wastewater management. Aquaculture wastewater (AWW) is rich in nitrogen, phosphorus, organic carbon, and other elements essential for microalgae. Due to the potential for AWW to be used as a microalgal growth medium and the potential of Chlorella sorokiniana to remediate wastewater, the growth of this species in AWW was evaluated. The microalgal growth in AWW was compared to the growth in a modified BG11 growth medium containing similar nutrient concentrations as the AWW. The effect of pH regulation and air-lifting the cell suspension at different airflow rates was also studied. As a result, it was found that C. sorokiniana can grow successfully in AWW; however, its cultivation required pH regulation. This microalga species can reach a biomass concentration of up to 476 mg/L and a biomass productivity of 140 mg/L/day. Furthermore, up to 78% of the nitrogen, 77% of the phosphorus, 70% of the magnesium, 90% of the zinc, and 99% of the nickel contained in the AWW were assimilated by the microalgae. The results of this study show that microalga cultivation in wastewater has great potential to reduce contamination while generating economic benefits.

Metabolic engineering of phosphite metabolism in Synechococcus elongatus PCC 7942 as an effective measure to control biological contaminants in outdoor raceway ponds

BACKGROUND

The use of cyanobacteria and microalgae as cell factories to produce biofuels and added-value bioproducts has received great attention during the last two decades. Important investments have been made by public and private sectors to develop this field. However, it has been a challenge to develop a viable and cost-effective platform for cultivation of cyanobacteria and microalgae under outdoor conditions. Dealing with contamination caused by bacteria, weedy algae/cyanobacteria and other organisms is a major constraint to establish effective cultivation processes.

RESULTS

Here, we describe the implementation in the cyanobacterium Synechococcus elongatus PCC 7942 of a phosphorus selective nutrition system to control biological contamination during cultivation. The system is based on metabolic engineering of S. elongatus to metabolize phosphite, a phosphorus source not normally metabolized by most organisms, by expressing a bacterial phosphite oxidoreductase (PtxD). Engineered S. elongatus strains expressing PtxD grow at a similar rate on media supplemented with phosphite as the non-transformed control supplemented with phosphate. We show that when grown in media containing phosphite as the sole phosphorus source in glass flasks, the engineered strain was able to grow and outcompete biological contaminants even when the system was intentionally inoculated with natural competitors isolated from an irrigation canal. The PtxD/phosphite system was successfully used for outdoor cultivation of engineered S. elongatus in 100-L cylindrical reactors and 1000-L raceway ponds, under non-axenic conditions and without the need of sterilizing containers and media. Finally, we also show that the PtxD/phosphite system can be used as selectable marker for S. elongatus PCC 7942 transgenic strains selection, eliminating the need of antibiotic resistance genes.

CONCLUSIONS

Our results suggest that the PtxD/phosphite system is a stable and sufficiently robust strategy to control biological contaminants without the need of sterilization or other complex aseptic procedures. Our data show that the PtxD/phosphite system can be used as selectable marker and allows production of the cyanobacterium S. elongatus PCC 7942 in non-axenic outdoor reactors at lower cost, which in principle should be applicable to other cyanobacteria and microalgae engineered to metabolize phosphite.

Transgenic microalgae as bioreactors

Microalgae are unicellular organisms that act as the crucial primary producers all over the world, typically found in marine and freshwater environments. Most of them can live photo-autotrophically, reproduce rapidly, and accumulate biomass in a short period efficiently. To adapt to the uninterrupted change of the environment, they evolve and differentiate continuously. As a result, some of them evolve special abilities such as toleration of extreme environment, generation of sophisticated structure to adapt to the environment, and avoid predators. Microalgae are believed to be promising bioreactors because of their high lipid and pigment contents. Genetic engineering technologies have given revolutions in the microalgal industry, which decoded the secrets of microalgal genes, express recombinant genes in microalgal genomes, and largely soar the accumulation of interested components in transgenic microalgae. However, owing to several obstructions, the industry of transgenic microalgae is still immature. Here, we provide an overview to emphasize the advantage and imperfection of the existing transgenic microalgal bioreactors.

Continuous cultivation of Arthrospira platensis for phycocyanin production in large-scale outdoor raceway ponds using microfiltered culture medium

In the present study, the effect of filtrating algal culture medium for reuse by using microfiltration membranes on microalgal growth, microbiological contamination, and phycocyanin production of Arthrospira platensis was investigated. Results showed that microfiltered culture medium affected microalgal growth, microbiological contamination, and phycocyanin production of A. platensis significantly. Microfiltered culture medium could enhance biomass production, photosynthesis, and phycocyanin accumulation and decrease microbiological contamination during continuous cultivation of A. platensis compared to the control. The profile of microbial communities, which contained the 10 phyla of microorganisms including bacteria and microzooplanktons, was identified for the first time for industrial algae systems of A. platensis with extreme conditions (salt-alkaline stress conditions). The application of the established strategy can enhance phycocyanin production of A. platensis while mitigating microbiological contamination.

Sequential phototrophic-mixotrophic cultivation of oleaginous microalga Graesiella sp. WBG-1 in a 1000 m2 open raceway pond

BACKGROUND

Microalgae are an important feedstock in industries. Currently, efforts are being made in the non-phototrophic cultivation of microalgae for biomass production. Studies have shown that mixotrophy is a more efficient process for producing algal biomass in comparison to phototrophic and heterotrophic cultures. However, cultivation of microalgae in pilot-scale open ponds in the presence of organic carbon substrates has not yet been developed. The problems are heterotrophic bacterial contamination and inefficient conversion of organic carbon.

RESULTS

Laboratory investigation was combined with outdoor cultivation to find a culture condition that favors the growth of alga, but inhibits bacteria. A window period for mixotrophic cultivation of the alga Graesiella sp. WBG-1 was identified. Using this period, a new sequential phototrophic-mixotrophic cultivation (SPMC) method that enhances algal biomass productivity and limits bacteria contamination at the same time was established for microalgae cultivation in open raceway ponds. Graesiella sp. WBG-1 maximally produced 12.5 g biomass and 4.1 g lipids m^-2 day^-1 in SPMC in a 1000 m² raceway pond, which was an over 50% increase compared to phototrophic cultivation. The bacterial number in SPMC (2.97 × 10⁵ CFU ml^-1) is comparable to that of the phototrophic cultivations.

CONCLUSIONS

SPMC is an effective and feasible method to cultivate lipid-rich microalgae in open raceway ponds. Successful scale-up of SPMC in a commercial raceway pond (1000 m² culture area) was demonstrated for the first time. This method is attractive for global producers of not only lipid-rich microalgae biomass, but also astaxanthin and β-carotene.

Biomass and lipid production from Chlorella vulgaris UTEX 26 cultivated in 2 m3 raceway ponds under semicontinuous mode during the spring season

A Chlorella vulgaris UTEX 26 semicontinuous culture was implemented in 2000 L raceways with M medium during spring season at greenhouse conditions. Areal biomass productivities between 20 and 26 g m^-2 d^-1 were reached on the third day. The maximal areal lipid productivity obtained was 6.1 g m^-2 d^-1 and an increment in the saturated fatty acids (SFA) proportion (C14-C18) was favored in comparison with the fatty acids obtained with M medium in photobioreactors of 1 L and photoperiod light:darkness 12:12 h. After the eighth day of the culture or biomass concentrations above 0.25 g L^-1, the microalgal cultures were prone to contamination by ciliates and amoebae, due to the sugars excreted by C. vulgaris UTEX 26. The periodical addition of NH₄HCO₃ to the microalgal culture maintained the ammonium concentration between 25 and 50 mg L^-1, which contributed to diminish the contamination risks by protozoa.