A novel strategy to enhance biohydrogen production using graphene oxide treated thermostable crude cellulase and sugarcane bagasse hydrolyzate under co-culture system

Sustainable biohydrogen production from lignocellulosic biomass sources - metabolic pathways, production enhancement, and challenges

Hydrogen production from biological processes has been hailed as a promising strategy for generating sustainable energy. Fermentative hydrogen production processes such as dark and photofermentation are considered more sustainable and economical than other biological methods such as biophotolysis. However, these methods have constraints such as low hydrogen yield and conversion efficiency, so practical implementations still need to be made. The present review provides an assessment and feasibility of producing biohydrogen through dark and photofermentation techniques utilizing various lignocellulosic biomass wastes as substrates. Furthermore, this review includes information about the strategies to increase the productivity rate of biohydrogen in an eco-friendly and sustainable manner, like integration of dark and photofermentation techniques, pretreatment of biomass, genetic modification of microorganisms, and application of nanoadditives.

Production Enhancement of Bacterial Cellulase Cocktail Using Potato Peels Waste Feedstock and Combination of Water Hyacinth Root and Pea Pod Extract as Natural Nutrient Media: Application in Bioconversion of Potato Peels

Solid wastes are the major contributors in global environmental pollution and their management is the need of urgency towards development of sustainable world. In the present work, solid waste of potato peels has been used as feedstock for fermentation of bacterial cellulase production and substrate for enzymatic hydrolysis via this enzymes cocktail. Additionally, liquid extracts of pea pod and root of water hyacinth wastes have been used to complete nutritional requirements and moisture balance in SSF process during the course of enzyme production. At optimum feedstock concentration of 6.0 g PPW and 10:40 extract-based moisture ratio of WHR and Ppw, Bacillus sp. produced 15 U/gds FP in 18 h, whereas maximum 36 U/gds BGL and 42 U/gds EG have been recorded in 24 h of SSF. Temperature 35 °C and pH 5.5 were optimum for enzyme production while the produced enzyme was thermally stable upto 30 h at 35 °C with 100% pH stability upto 14 h and 77% relative activity at 34 h. The optimized bacterial enzymes have been used for bioconversion of PPW biomass and 26 g/L glucose has been recorded at a hydrolytic temperature of 50 °C and pH 5.0. The study may have feasible promising scope in cellulosic biorefineries and waste management.

Bacterial cellulase production via co-fermentation of paddy straw and Litchi waste and its stability assessment in the presence of ZnMg mixed-phase hydroxide-based nanocomposite derived from Litchi chinensis seeds

Co-fermentation via co-cultured bacterial microorganisms to develop enzymes in solid-state fermentation (SSF) is a promising approach. This strategy is imperative in a series of sustainable and effective approaches due to superior microbial growth and the use of a combination of inexpensive feedstocks for enzyme production wherein mutually participating enzyme-producing microbial communities are employed. Moreover, the addition of nanomaterials to this technique may aid in its prominent advantage of enhancing enzyme production. This strategy may be able to decrease the overall cost of the bioprocessing to produce enzymes by further implementing biogenic, route-derived nanomaterials as catalysts.Therefore, the present study attempts to explore endoglucanase (EG) production using a bacterial coculture system by employing two different bacterial strains, namely, Bacillus subtillius and Seretia marchansea under SSF in the presence of a ZnMg hydroxide-based nanocompositeas a nanocatalyst. The nanocatalyst based on ZnMg hydroxide has been prepared via green synthesis using Litchi waste seed, while SSF for EG production has been conducted using cofermentation of litchi seed (Ls) and paddy straw (Ps) waste. Under an optimized substrate concentration ratio of 5:6 Ps:Ls and in the presence of 2.0 mg of nanocatalyst, the cocultured bacterial system produced 1.6 IU/mL of EG enzyme, which was ~1.33 fold higher as compared to the control. Additionally, the same enzyme showed its stability for 135 min in the presence of 1.0 mg of nanocatalyst at 38 °C. The nanocatalyst has been synthesized using the green method, wherein waste litchi seed is used as a reducing agent, and the nanocatalyst could be employed to improve the production and functional stability of crude enzymes. The findings of the present study may have significant application in lignocellulosic-based biorefinaries and cellulosic waste management.

Microbial cellulase production and stability investigations via graphene like carbon nanostructure derived from paddy straw

Cellulases are among the most in-demand bioprocess enzymes, and the high cost of production, combined with their low enzymatic activity, is the main constraint, particularly in the biofuels industry. As a result, low-cost enzyme production modes with high activity and stability have emerged as the primary focus of research. Here, a method for producing a graphene like carbon nanostructure (GLCNs) has been investigated utilizing paddy straw (Ps), and its physicochemical characteristics have been examined using a variety of techniques including XRD, FT-IR, SEM and TEM. Further, the pretreatment of Ps feedstock for cellulase production was done using diluted waste KOH liquid collected during the preparation of the GLCNs. To increase the production and stability of the enzyme, newly prepared GLCNs is utilized as a nanocatalyst. Using 15 mg of GLCNs, 35 IU/gds FP activity was seen after 72 h, followed by 158 IU/gds EG and 114 IU/gds BGL activity in 96 h. This nanocatalyst supported enzyme was thermally stable at 70 °C up to 15 h and exhibited stability at pH 7.0 for 10 h by holding 66 % of its half-life.

Impact of nanomaterials on sustainable pretreatment of lignocellulosic biomass for biofuels production: An advanced approach

Biomass to biofuels production technology appears to be one of the most sustainable strategies among various renewable energy resources. Herein, pretreatment is an unavoidable and key step to increase free cellulose availability and digestibility to produce green fuels. Various existing pretreatment technologies of lignocellulosics biomasses (LCBs) face distinct challenges e.g., energy consuming, cost intensive, may lead partial removal of lignin, complex inhibitors production as well as may cause environmental pollutions. These, limitations may be overcome with the application of nanomaterials, employed as nanocatalysts during the pretreatment process of LCBs. In this prospect, the present review focuses and summarizes results of numerous studies and exploring the utilizations of magnetic, carbon based nanostructure, and nanophotocatalysts mediated pretreatment processes along with their possible mechanisms to improve the biofuels production compared to conventional chemical based pretreatment approaches. Furthermore, different aspects of nanomaterials based pretreatment methods with their shortcomings and future prospects have been discussed.

Enhancement in functional stability of microbial endoglanases produced using paddy straw via treatment with manganese oxide based porous nanocomposite synthesized from mixed fruit waste

Microbial cellulases are the enzymes used in numerous industrial biotechnological applications. Efficiency of celluloytic cocktails plays a key role in the conversion of biomass into biofuels, but limited production, high cost and low efficiency are the main obstacles to sustainable biorefining. The current work aims to establish a feasible approach for boosting the production of fungal endoglucanse (EG) and its functional stability utilizing nanocomposite materials based on manganese oxide. Herein, aqueous extract from mixed fruit waste was used to synthesize the nanocomposite sample, which was subsequently subjected to several characterization techniques for analysis. Following the solid-state fermentation of paddy straw, and by employing 75 mg nanocomposite, 192 IU/gds EG was produced under the optimal conditions, while 19 IU/gds FP and 98 IU/gds BGL production were recorded. The crude EG enzyme treated with nanocomposite also shows complete stability at pH 5.0 for 3.5 h while retaining thermal activity at 70 °C for 4 h.

A comprehensive review on the biological conversion of lignocellulosic biomass into hydrogen: Pretreatment strategy, technology advances and perspectives

The globe has dependent on energy generation and utilization for many years; conversely, ecological concerns constrained the world to view hydrogen as an alternative for economic development. Lignocellulosic biomass is broadly accessible as a low-cost renewable feedstock and nonreactive nature; it has received a lot of consideration as a global energy source and the most attractive alternative to replace fossil natural substances for energy production. Pretreatment of lignocellulosic biomass is essential to advance its fragmentation and lower the lignin content for sustainable energy generation. This review's goal is to provide the different pretreatment strategies for enlarging the solubility and surface area of lignocellulosic biomass. The biological conversion of lignocellulosic biomass to hydrogen was reviewed and operational conditions and enhancing methods were discussed. This review summarizes the working conditions, parameters, yield percentages, techno-economic analysis, challenges, and future recommendations on the direct conversion of biomass to hydrogen.

Improvement of Lignocellulolytic Enzyme Production Mediated by Calcium Signaling in Bacillus subtilis Z2 under Graphene Oxide Stress

An increase in exoenzyme production can be enhanced by environmental stresses such as graphene oxide (GO) stress, but the link between the two events is still unclear. In this work, the effect of GO as an environmental stress factor on exoenzyme (lignocellulolytic enzyme, amylase, peptidase, and protease) biosynthesis was investigated in Bacillus subtilis Z2, and a plausible mechanism by which cytosolic Ca²⁺ regulates lignocellulolytic enzyme production in B. subtilis Z2 subjected to GO stress was proposed. The filter paper-hydrolyzing (FPase [representing total cellulase]), carboxymethylcellulase (CMCase [representing endoglucanase]), and β-glucosidase activities and extracellular protein concentration of the wild-type strain under 10 μg/mL GO stress were 1.37-, 1.64-, 1.24-, and 1.16-fold those of the control (without GO stress), respectively. Correspondingly, the transcription levels of lignocellulolytic enzyme genes, cytosolic Ca²⁺ level, and biomass concentration of B. subtilis were all increased. With lignocellulolytic enzyme from B. subtilis used to hydrolyze alkali-pretreated rice straw, the released reducing sugar concentration reached 265.53 mg/g, and the removal rates of cellulose, hemicellulose, and lignin were 52.4%, 30.1%, and 7.5%, respectively. Furthermore, transcriptome data revealed that intracellular Ca²⁺ homeostasis played a key role in regulating the levels of gene transcription related to the synthesis of lignocellulolytic enzymes and exoenzymes. Finally, the use of Ca²⁺ inhibitors (LaCl₃ and EDTA) and deletion of spcF (a calmodulin-like protein gene) further demonstrated that the overexpression of those genes was regulated via calcium signaling in B. subtilis subjected to GO stress. IMPORTANCE To effectively convert lignocellulose into fermentable sugars, high lignocellulolytic enzyme loading is needed. Graphene oxide (GO) has been shown to promote exoenzyme (lignocellulolytic enzyme, amylase, peptidase, and protease) production in some microorganisms; however, the regulatory mechanism of the biosynthesis of lignocellulolytic enzymes under GO stress remains unclear. In this work, the lignocellulolytic enzyme production of B. subtilis under GO stress was investigated, and the potential mechanism by which B. subtilis enhanced lignocellulolytic enzyme production through the calcium signaling pathway under GO stress was proposed. This work revealed the role of calcium signaling in the production of enzymes under external environmental stress and provided a direction to facilitate lignocellulolytic enzyme production by B. subtilis.

Green Synthesis of Zn(OH)2/ZnO-Based Bionanocomposite using Pomegranate Peels and Its Application in the Degradation of Bacterial Biofilm

The ability and potency of bacterial species to form biofilms, which show antibiotic resistance thereby avoiding antibiotic surfaces, is a major cause of prolonged infections. Various advanced approaches have been employed to prevent or damage bacterial biofilms, formed by a variety of bacterial strains, to help prevent the associated infectious disease. In this context, zinc-based nanostructures have been recognized as a potential antibiotic agent against a broad spectrum of bacterial communities. As a result, a sustainable and green synthesis method was adapted in the present study to synthesize a Zn(OH)₂/ZnO-based bionanocomposite, in which aqueous extracts of waste pomegranate peels (Punica granatum) were employed as a natural bioreducing agent to prepare the bionanocomposite at room temperature. Furthermore, FT-IR, XRD, DLS, UV-Visible, PL spectroscopy, FE-SEM, and TEM were used to characterize the green route synthesized a Zn(OH)₂/ZnO bionanocomposite. The average crystallite size was determined using the Scherrer relation to be 38 nm, and the DLS results indicated that the Zn(OH)₂/ZnO bionanocomposite had a hydrodynamic size of 170 nm. On the other hand, optical properties investigated through UV-Vis and PL spectroscopy explored the energy bandgap between 2.80 and 4.46 eV, corresponding to the three absorption edges, and it covered the blue spectrum when the sample was excited at 370 nm. Furthermore, the impact of this green route synthesized a Zn(OH)₂/ZnO bionanocomposite on the biofilm degradation efficiency of the pathogenic bacterial strain Bacillus subtilis PF_1 using the Congored method was investigated. The Congored assay clearly explored the biofilm degradation efficiency in the presence of a 50 mg/mL and 75 mg/mL concentration of the Zn(OH)₂/ZnO bionanocomposite against the bacterial strain Bacillus subtilis PF_1 grown for 24 h. This study can be further applied to the preparation of bionanocomposites following a low-cost green synthesis approach, and thus prepared nanostructures can be exploited as advanced antimicrobial agents, which could be of great interest to prevent various infectious diseases.

Sustainable valorization of sugarcane residues: Efficient deconstruction strategies for fuels and chemicals production

The global climate crisis and the ongoing increase in fossil-based fuels have led to an alternative solution of using biomass for fuel production. Sugarcane bagasse (SCB) is an agricultural residue with a global production of more than 100 million metric tons and it has various applications in a biorefinery concept. This review brings forth the composition, life cycle assessment, and various pretreatments for the deconstruction techniques of SCB for the production of valuable products. The ongoing research in the production of biofuels, biogas, and electricity utilizing the bagasse was elucidated. SCB is used in the production of carboxymethyl cellulose, pigment, lactic acid, levulinic acid, and xylooligosaccharides and it has prospective in meeting the demand for global energy and environmental sustainability.

Improved biohydrogen production via graphene oxide supported granular system based on algal hydrolyzate, secondary sewage sludge and bacterial consortia

Biohydrogen production using renewable sources has been regarded as one of the most sustainable ways to develop low-cost and green production technology. In order to achieve this objective, herein biohydrogen production has been conducted using the combination of untreated secondary sewage sludge (Sss), algal biomass hydrolyzate (Abh), graphene oxide (GO) and bacterial consortia that forms a granular system. Thus, naturally formed granular system produced cumulative H₂ of 1520mL/L in 168h with the maximum production rate of 13.4mL/L/h in 96h at initial pH 7.0, and optimum temperature of 37^oC. It is noticed that the combination of Abh, Sss and GO governed medium showed 42.05% higher cumulative H₂ production along with 22.71% higher production rate as compared to Abh and Sss based H₂ production medium. The strategy presented herein may find potential applications for the low-cost biohydrogen production using waste biomasses including Sss and Abh.

Tannic acid: a crosslinker leading to versatile functional polymeric networks: a review

With the thriving of mussel-inspired polyphenol chemistry as well as the demand for low-cost analogues to polydopamine in adhesive design, tannic acid has gradually become a research focus because of its wide availability, health benefits and special chemical properties. As a natural building block, tannic acid could be used as a crosslinker either supramolecularly or chemically, ensuring versatile functional polymeric networks for various applications. Up to now, a systematic summary on tannic-acid-based networks has still been waiting for an update and outlook. In this review, the common features of tannic acid are summarized in detail, followed by the introduction of covalent and non-covalent crosslinking methods leading to various tannic-acid-based materials. Moreover, recent progress in the application of tannic acid composites is also summarized, including bone regeneration, skin adhesives, wound dressings, drug loading and photothermal conversion. Above all, we also provide further prospects concerning tannic-acid-crosslinked materials.

Evaluation of enhanced production of cellulose deconstructing enzyme using natural and alkali pretreated sugar cane bagasse under the influence of graphene oxide

High production cost of cellulase enzyme is one of the main constraints in the practical implementation of biofuels at global scale. Therefore, the present investigation is focused to produce low-cost cellulase via sustainable strategies. This work evaluates to achieve enhanced fungal cellulase production using natural and pretreated sugar cane bagasse (SCB) via Rhizopus oryzae NS5 under the solid state fermentation (SSF) while implementing graphene oxide (GO) as a catalyst. A low alkali treatment showed better performance for cellulase production wherein 14 IU/gds FP activity is observed in 96 h using 0.5% alkali treated SCB, significantly higher as compared to 10 IU/gds FP in case of untreated SCB. Further, the effect of GO has been investigated on cellulase production, incubation temperature and pH of the production medium. Under the influence of 1.5% concentration of GO, alkali pretreated SCB produced maximum 25 IU/gds cellulase in 72 h at pH 5.0 and 40 °C.

Co-fermentation of residual algal biomass and glucose under the influence of Fe3O4 nanoparticles to enhance biohydrogen production under dark mode

The present study reports Fe₃O₄ nanoparticles (Fe₃O₄ NPs) induced enhanced hydrogen production via co-fermentation of glucose and residual algal biomass (cyanobacteria Lyngbya limnetica). A significant enhancement of dark fermentative H₂ production has been noticed under the influence of co-fermentation of glucose and residual algal biomass using Fe₃O₄ NPs as catalyst. Further, using the optimized ratio of glucose to residual algal biomass (10:4), ∼ 37.14 % higher cumulative H₂ has been recorded in presence of 7.5 mg/L Fe₃O₄ NPs as compared to control at 37 °C. In addition, under the optimum conditions [glucose to residual algal biomass ratio (10:4)] presence of 7.5 mg/L Fe₃O₄ NPs produces ∼ 937 mL/L cumulative H₂ in 168 h at pH 7.5 and at temperature 40 °C. Clostridum butyrium, employed for the dark fermentation yielded ∼ 7.7 g/L dry biomass in 168 h whereas acetate (9.0 g/L) and butyrate (6.2 g/L) have been recorded as the dominating metabolites.

Biogenic enabled in-vitro synthesis of nickel cobaltite nanoparticle and its application in single stage hybrid biohydrogen production

In biomass to biofuels production technology enzyme plays a key role. Nevertheless, the high production cost of cellulase enzyme is one of the critical issues in the economical production of biofuels. Nowadays, implementation of nanomaterials as catalyst is emerging as an innovative approach for the production of sustainable energy. In this context, synthesis of nickel cobaltite nanoparticles (NiCo₂O₄ NPs) via in vitro route has been conducted using fungus Emericella variecolor NS3 meanwhile; its impact has been evaluated on improved thermal and pH stability of crude cellulase enzyme obtained from Emericella variecolor NS3. Additionally, bioconversion of alkali treated rice straw using NiCo₂O₄ NPs stabilized cellulase produced sugar hydrolyzate which is further used for H₂ production via hybrid fermentation. Total 51.7 g/L sugar hydrolyzate produced 2978 mL/L cumulative H₂ production after 336 h along with maximum rate 34.12 mL/L/h in 24 h using Bacillus subtilis PF_1 and Rhodobacter sp. employed for dark and photo-fermentation, respectively.

Integrated biohydrogen production via lignocellulosic waste: Opportunity, challenges & future prospects

Hydrogen production through biological route is the cleanest, renewable and potential way to sustainable energy generation. Productions of hydrogen via dark and photo fermentations are considered to be more sustainable and economical approach over numerous existing biological modes. Nevertheless, both the biological modes suffer from certain limitations like low yield and production rate, and because of these practical implementations are still far away. Therefore, the present review provides an assessment and feasibility of integrated biohydrogen production strategy by combining dark and photo-fermentation as an advanced biochemical processing while using lignocellulosics biomass to improve and accelerate the biohydrogen production technology in a sustainable manner. This review also evaluates practical viability of the integrated approach for biohydrogen production along with the analysis of the key factors which significantly influence to elevate this technology on commercial ground with the implementation of various environment friendly and innovative approaches.

Thermostable cellulose saccharifying microbial enzymes: Characteristics, recent advances and biotechnological applications

Cellulases play a promising role in the bioconversion of renewable lignocellulosic biomass into fermentable sugars which are subsequently fermented to biofuels and other value-added chemicals. Besides biofuel industries, they are also in huge demand in textile, detergent, and paper and pulp industries. Low titres of cellulase production and processing are the main issues that contribute to high enzyme cost. The success of ethanol-based biorefinery depends on high production titres and the catalytic efficiency of cellulases functional at elevated temperatures with acid/alkali tolerance and the low cost. In view of their wider application in various industrial processes, stable cellulases that are active at elevated temperatures in the acidic-alkaline pH ranges, and organic solvents and salt tolerance would be useful. This review provides a recent update on the advances made in thermostable cellulases. Developments in their sources, characteristics and mechanisms are updated. Various methods such as rational design, directed evolution, synthetic & system biology and immobilization techniques adopted in evolving cellulases with ameliorated thermostability and characteristics are also discussed. The wide range of applications of thermostable cellulases in various industrial sectors is described.

Advances and Applications of Clostridium Co-culture Systems in Biotechnology

Clostridium spp. are important microorganisms that can degrade complex biomasses such as lignocellulose, which is a widespread and renewable natural resource. Co-culturing Clostridium spp. and other microorganisms is considered to be a promising strategy for utilizing renewable feed stocks and has been widely used in biotechnology to produce bio-fuels and bio-solvents. In this review, we summarize recent progress on the Clostridium co-culture system, including system unique advantages, composition, products, and interaction mechanisms. In addition, biochemical regulation and genetic modifications used to improve the Clostridium co-culture system are also summarized. Finally, future prospects for Clostridium co-culture systems are discussed in light of recent progress, challenges, and trends.

Investigation of heterogeneous sulfonated graphene oxide to hydrolyze cellulose and produce dark fermentative biohydrogen using Enterobacter aerogenes

The main aim of this work was investigating the potential of sulfonated graphene oxide (sGO) for hydrolysis of cellulosic substrates and dark fermentative hydrogen production from obtained hydrolysates using E. aerogenes. Sulfonation of graphene oxide was performed using chlorosulfonic acid which showed a high acid density of 4.63 mmol/g. Influence of the reaction time (1-5 h), temperature (90-180 °C) and sGO dosage (62.5-500 mg in 25 mL reaction volume) on the hydrolysis of pretreated microcrystalline cellulose was experimented. It revealed that the yield of glucose and total reducing sugars and selectivity can reach 454.4 ± 22.20 mg/g, 682.6 ± 30.67 mg/g and 95.5%, respectively, at 150 °C for 3 h using 250 mg sGO. The maximum hydrogen efficiency of 150.0 ± 5.65 mL/g was achieved under optimized conditions, which was 2.2-fold higher than that from the pretreated MCC substrate as control in the absence of sGO (67.3 ± 8.84 mL/g).

Waste based hydrogen production for circular bioeconomy: Current status and future directions

The present fossil fuel-based energy sector has led to significant industrial growth. On the other hand, the dependence on fossil fuels leads to adverse impact on the environment through releases of greenhouse gases. In this scenario, one possible substitute is biohydrogen, an eco-friendly energy carrier as high-energy produces. The substrates rich in organic compounds like organic waste/wastewater are very useful for improved hydrogen generation through the dark fermentation. Thus, this review article, initially, the status of biohydrogen production from organic waste and various strategies to enhance the process efficiency are concisely discussed. Then, the practical confines of biohydrogen processes are thoroughly discussed. Also, alternate routes such as multiple process integration approach by adopting biorefinery concept to increase overall process efficacy are considered to address industrial-level applications. To conclude, future perspectives besides with possible ways of transforming dark fermentation effluent to biofuels and biochemicals, which leads to circular bioeconomy, are discussed.

Nanoengineered cellulosic biohydrogen production via dark fermentation: A novel approach

The insights of nanotechnology for cellulosic biohydrogen production through dark fermentation are reviewed. Lignocellulosic biomass to sugar generation is a complex process and covers the most expensive part of cellulose to sugar production technology. In this context, the impacts of nanomaterial on lignocellulosic biomass to biohydrogen production process have been reviewed. In addition, the feasibility of nanomaterials for implementation in each step of the cellulosic biohydrogen production is discussed for economic viability of the process. Numerous aspects such as possible replacement of chemical pretreatment method using nanostructured materials, use of immobilized enzyme for a fast rate of reaction and its reusability along with long viability of microbial cells and hydrogenase enzyme for improving the productivity are the highlights of this review. It is found that various types of nanostructured materials e.g. metallic nanoparticles (Fe°, Ni, Cu, Au, Pd, Au), metal oxide nanoparticles (Fe₂O₃, F₃O₄, NiCo₂O₄, CuO, NiO, CoO, ZnO), nanocomposites (Si@CoFe₂O₄, Fe₃O₄/alginate) and graphene-based nanomaterials can influence different parameters of the process and therefore may perhaps be utilized for cellulosic biohydrogen production_. The emphasis has been given on the cost issue and synthesis sustainability of nanomaterials for making the biohydrogen technology cost effective. Finally, recent advancements and feasibility of nanomaterials as the potential solution for improved cellulose conversion to the biohydrogen production process have been discussed, and this is likely to assist in developing an efficient, economical and sustainable biohydrogen production technology.

Thermozymes: Adaptive strategies and tools for their biotechnological applications

In today's scenario of global climate change, there is a colossal demand for sustainable industrial processes and enzymes from thermophiles. Plausibly, thermozymes are an important toolkit, as they are known to be polyextremophilic in nature. Small genome size and diverse molecular conformational modifications have been implicated in devising adaptive strategies. Besides, the utilization of chemical technology and gene editing attributions according to mechanical necessities are the additional key factor for efficacious bioprocess development. Microbial thermozymes have been extensively used in waste management, biofuel, food, paper, detergent, medicinal and pharmaceutical industries. To understand the strength of enzymes at higher temperatures different models utilize X-ray structures of thermostable proteins, machine learning calculations, neural networks, but unified adaptive measures are yet to be totally comprehended. The present review provides a recent updates on thermozymes and various interdisciplinary applications including the aspects of thermophiles bioengineering utilizing synthetic biology and gene editing tools.