Bioflocculation formation of microalgae-bacteria in enhancing microalgae harvesting and nutrient removal from wastewater effluent

Characterizing algal-bacterial symbiotic biofilms: Insights into coexistence of algae and anaerobic microorganisms

This study constructed an integrated algae/partial nitrification/anammox biofilm system and operated it for 240 days. The total nitrogen removal efficiency exceeded 90 %. The structure, compositions, and function of this symbiotic biofilm, which played a pivotal role in the system, were analyzed in detail. Microscope photos and fluorescence in situ hybridization both showed that bacteria and algae were well integrated. The dissolved oxygen gradient further confirmed that different functional microorganisms grew at varying depths within biofilm. Algae formed an oxygen-producing zone (0-0.48 mm), followed by ammonia oxidizing bacteria (AOB) consuming oxygen to form an oxygen-consuming zone (0.48-0.86 mm), and anaerobic ammonia oxidizing bacteria (AnAOB) removed nitrogen in anaerobic zone (>0.86 mm). Chlorella, Nitrosomonas and Candidatus_Kuenenia were identified as the dominant algae, AOB and AnAOB, with relative abundances of 11.80 %, 19.77 % and 3.07 %, respectively. This layered biofilm benefitted providing a suitable environment for various microorganisms to survive within a complex biofilm.

Biocompounds from wastewater-grown microalgae: a review of emerging cultivation and harvesting technologies

Microalgae biomass has attracted attention as a feedstock to produce biofuels, biofertilizers, and pigments. However, the high production cost associated with cultivation and separation stages is a challenge for the microalgae biotechnology application on a large scale. A promising approach to overcome the technical-economic limitations of microalgae production is using wastewater as a nutrient and water source for cultivation. This strategy reduces cultivation costs and contributes to valorizing sanitation resources. Therefore, this article presents a comprehensive literature review on the status of microalgae biomass cultivation in wastewater, focusing on production strategies and the accumulation of valuable compounds such as lipids, carbohydrates, proteins, fatty acids, and pigments. This review also covers emerging techniques for harvesting microalgae biomass cultivated in wastewater, discussing the advantages and limitations of the process, as well as pointing out the main research opportunities. The novelty of the study lies in providing a detailed analysis of state-of-the-art and potential advances in the cultivation and harvesting of microalgae, with a special focus on the use of wastewater and implementing innovative strategies to enhance productivity and the accumulation of compounds. In this context, the work aims to guide future research concerning emerging technologies in the field, emphasizing the importance of innovative approaches in cultivating and harvesting microalgae for advancing knowledge and practical applications in this area.

Optimizing the algae-bacteria biofilm reactor for imidacloprid wastewater treatment: An evaluation of hydraulic retention times for enhanced efficiency and energy savings

Recent observations have highlighted the rapidly growing prevalence of emerging contaminants such as Imidacloprid (IMI) within our environment. These insecticidal pollutants, coexisting with more traditional contaminants, have become predominant in aquatic systems, posing risks to both human and ecological well-being. Among the various wastewater treatment approaches tested, biofilm reactors are currently gaining prominence. In this study, we employed an Algae-Bacteria Biofilm Reactor (ABBR) to concurrently address both conventional and emergent contaminants, specifically IMI, over an extended timeframe. Following a 60-day assessment, the ABBR consistently demonstrated removal efficiencies exceeding 85% for total dissolved nitrogen, ammonia nitrogen, and total dissolved phosphorus, and also achieved removal efficacy for the soluble chemical oxygen demand (sCOD). Despite the removal efficiency of IMI (with initial concentration is 1.0 mg/L) in ABBR showed a gradual decline over the extended period, it remained consistently effective over 50% due to the microalgae-mediated free radical reactions, indicating the ABBR's sustained efficiency in long-duration operations. Additionally, applying some non-conventional modifications, like aeration removal and reducing light exposure, demonstrated minimal impact on the reactor's pollutant removal efficiencies, achieving comparable results to the control group (which utilized aeration with a 14:10 light/dark ratio), 0.92 kW h/L/d of electricity can be saved economically, which accentuated the potential for energy conservation. An in-depth analysis of the treated effluents from the ABBRs, using ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) technique, uncovered four potential transformation pathways for IMI. Overall, our findings suggest that these optimized processes did not influence the transformation products of IMI, thereby reaffirming the viability of our proposed optimization.

Cultivation of microalgae-bacteria consortium by waste gas-waste water to achieve CO2 fixation, wastewater purification and bioproducts production

The cultivation of microalgae and microalgae-bacteria consortia provide a potential efficient strategy to fix CO2 from waste gas, treat wastewater and produce value-added products subsequently. This paper reviews recent developments in CO2 fixation and wastewater treatment by single microalgae, mixed microalgae and microalgae-bacteria consortia, as well as compares and summarizes the differences in utilizing different microorganisms from different aspects. Compared to monoculture of microalgae, a mixed microalgae and microalgae-bacteria consortium may mitigate environmental risk, obtain high biomass, and improve the efficiency of nutrient removal. The applied microalgae include Chlorella sp., Scenedesmus sp., Pediastrum sp., and Phormidium sp. among others, and most strains belong to Chlorophyta and Cyanophyta. The bacteria in microalgae-bacteria consortia are mainly from activated sludge and specific sewage sources. Bioengineer in CBB cycle in microalgae cells provide effective strategy to achieve improvement of CO2 fixation or a high yield of high-value products. The mechanisms of CO2 fixation and nutrient removal by different microbial systems are also explored and concluded, the importance of microalgae in the technology is proven. After cultivation, microalgae biomass can be harvested through physical, chemical, biological and magnetic separation methods and used to produce high-value by-products, such as biofuel, feed, food, biochar, fertilizer, and pharmaceutical bio-compounds. Although this technology has brought many benefits, some challenging obstacles and limitation remain for industrialization and commercializing.

Microalgae harvesting for wastewater treatment and resources recovery: A review

Microalgae-based wastewater treatment has been conceived to obtain reclaimed water and produce microalgal biomass for bio-based products and biofuels generation. However, microalgal biomass harvesting is challenging and expensive, hence one of the main bottlenecks for full-scale implementation. Finding an integrated approach that covers concepts of engineering, green chemistry and the application of microbial anabolism driven towards the harvesting processes, is mandatory for the widespread establishment of full-scale microalgae wastewater treatment plants. By using nature-based substances and applying concepts of chemical functionalization in already established harvesting methods, the costs of harvesting processes could be reduced while preventing microalgae biomass contamination. Moreover, microalgae produced during wastewater treatment have unique culture characteristics, such as the consortia, which are primarily composed of microalgae and bacteria, that should be accounted for prior to downstream processing. The aim of this review is to examine recent advances in microalgal biomass harvesting and recovery in wastewater treatment systems, considering the impact of consortia variability. The costs of available harvesting technologies, such as coagulation/flocculation, coupled to sedimentation and differential air flotation, are provided. Additionally, promising technologies are discussed, including autoflocculation, bioflocculation, new filtration materials, nanotechnology, microfluidic and magnetic methods.

Continuous cultivation of mixed-culture microalgae using anaerobic digestion effluent in photobioreactors with different strategies for adjusting nitrogen loading rate

This study examined continuous mixed-culture microalgae cultivation for nutrient removal from anaerobic digestion (AD) effluents in photobioreactors, while altering the NH4+-N loading rate (NLR) by adjusting either the hydraulic retention time (HRT) (reactor set RH) or the influent NH4+-N concentration (reactor set RS). Both RH and RS demonstrated efficient nutrient removal and microalgae cultivation at NLRs of 4-10 mg NH4+-N/L∙d, reaching peak performance at 10 mg NH4+-N/L∙d. Within this range, RH obtained greater biomass yield and productivity, while RS maintained higher microalgal concentrations. The cultivated biomasses obtained from RH and RS had good settleability and suitable fatty acid compositions as a biodiesel feedstock, although their organic composition varied considerably with NLR and HRT. Parachlorella overwhelmingly dominated the reactors' microalgal communities throughout the experiment, co-existing with various microalgae-associated bacteria. Changes in NLR significantly influenced the bacterial community structures, underscoring its critical role in determining reactor performance and microalgal-bacterial community behavior.

Technologies for harvesting the microalgae for industrial applications: Current trends and perspectives

Microalgae are emerging as a promising source for augmenting the supply of essential products to meet global demands in an environmentally sustainable manner. Despite the potential benefits of microalgae in industry, the high energy consumption for harvesting remains a significant obstacle. This review offers a comprehensive overview of microalgae harvesting technologies and their industrial applications, with particular emphasis on the latest advances in flocculation techniques. These cutting-edge methods have been applied to biodiesel production, food and nutraceutical processing, and wastewater treatment. Large-scale harvesting is still severely impeded by the high cost despite progress has been made in laboratory studies. In the future, cost-effective microalgal harvesting will rely on efficient resource utilization, including the use of waste materials and the reuse of media and flocculants. Additionally, precise regulation of biological metabolism will be necessary to overcome algal species-related limitations through the development of extracellular polymeric substance-induced flocculation technology.

Biotechnologies for bulk production of microalgal biomass: from mass cultivation to dried biomass acquisition

Microalgal biomass represents a sustainable bioresource for various applications, such as food, nutraceuticals, pharmaceuticals, feed, and other bio-based products. For decades, its mass production has attracted widespread attention and interest. The process of microalgal biomass production involves several techniques, mainly cultivation, harvesting, drying, and pollution control. These techniques are often designed and optimized to meet optimal growth conditions for microalgae and to produce high-quality biomass at acceptable cost. Importantly, mass production techniques are important for producing a commercial product in sufficient amounts. However, it should not be overlooked that microalgal biotechnology still faces challenges, in particular the high cost of production, the lack of knowledge about biological contaminants and the challenge of loss of active ingredients during biomass production. These issues involve the research and development of low-cost, standardized, industrial-scale production equipment and the optimization of production processes, as well as the urgent need to increase the research on biological contaminants and microalgal active ingredients. This review systematically examines the global development of microalgal biotechnology for biomass production, with emphasis on the techniques of cultivation, harvesting, drying and control of biological contaminants, and discusses the challenges and strategies to further improve quality and reduce costs. Moreover, the current status of biomass production of some biotechnologically important species has been summarized, and the importance of improving microalgae-related standards for their commercial applications is noted.

Bacteria and microalgae associations in periphyton-mechanisms and biotechnological opportunities

Phototrophic and heterotrophic microorganisms coexist in complex and dynamic structures called periphyton. These structures shape the biogeochemistry and biodiversity of aquatic ecosystems. In particular, microalgae-bacteria interactions are a prominent focus of study by microbial ecologists and can provide biotechnological opportunities for numerous applications (i.e. microalgal bloom control, aquaculture, biorefinery, and wastewater bioremediation). In this review, we analyze the species dynamics (i.e. periphyton formation and factors determining the prevalence of one species over another), coexisting communities, exchange of resources, and communication mechanisms of periphytic microalgae and bacteria. We extend periphyton mathematical modelling as a tool to comprehend complex interactions. This review is expected to boost the applicability of microalgae-bacteria consortia, by drawing out knowledge from natural periphyton.

Potential of biogenic and non-biogenic waste materials as flocculant for algal biomass harvesting: Mechanism, parameters, challenges and future prospects

In this review article, waste materials (biogenic/non-biogenic) are focused as the flocculants for harvesting of algal biomass. Chemical flocculants are widely utilized for the effective harvesting of algal biomass at a commercial scale while the high cost is a major drawback. The waste materials-based flocculants (WMBF) are started to utilize as one of the cost-effective performance for dual benefits of waste minimization and reuse for sustainable recovery of biomass. The novelty of the article is articulated with the objective that presents an insight of WMBF, classification of WMBF, preparation methods of WMBF, mechanisms of flocculation, factors affecting flocculation-mechanism, challenges and future recommendations that are required for harvesting of algae. The WMBF are shown similar flocculation mechanisms and flocculation efficiencies as chemical flocculants. Thus, the utilization of waste material for the flocculation process of algal cells minimizes the waste load into the environment and transforms the waste materials into valuable resources.

Integrated culture and harvest systems for improved microalgal biomass production and wastewater treatment

Microalgae cultivation in wastewater has received much attention as an environmentally sustainable approach. However, commercial application of this technique is challenging due to the low biomass output and high harvesting costs. Recently, integrated culture and harvest systems including microalgae biofilm, membrane photobioreactor, microalgae-fungi co-culture, microalgae-activated sludge co-culture, and microalgae auto-flocculation have been explored for efficiently coupling microalgal biomass production with wastewater purification. In such systems, the cultivation of microalgae and the separation of algal cells from wastewater are performed in the same reactor, enabling microalgae grown in the cultivation system to reach higher concentration, thus greatly improving the efficiency of biomass production and wastewater purification. Additionally, the design of such innovative systems also allows for microalgae cells to be harvested more efficiently. This review summarizes the mechanisms, characteristics, applications, and development trends of the various integrated systems and discusses their potential for broad applications, which worth further research.

Aggregation and construction mechanisms of microbial extracellular polymeric substances with the presence of different multivalent cations: Molecular dynamic simulation and experimental verification

Interactions between cations and extracellular polymeric substances (EPS) play an important role in the formation of microbial aggregates and have key effects on the physical properties of activated sludge across wastewater and sludge treatment process. Here, a molecular model of EPS cluster in activated sludge was constructed and simulated by molecular dynamics (MD) to probe the structural properties of EPS and the interaction between EPS and prevalent multivalent cations (Ca²⁺, Mg²⁺, Al³⁺). Then the predicted changes in physical properties were validated against the dynamic light scattering, XAD resin fractionation and rheology test. The binding dynamics and interactions mechanisms between multivalent cations and EPS functional groups were further investigated using MD in combination with spectroscopic analysis. Results suggest that biopolymers are originally aggregated by electrostatic and intermolecular interactions forming dynamic clusters with negatively charged surface functional groups, which induced electrostatic repulsion preventing further agglomeration of biopolymer clusters. In the presence of multivalent cations, surface polar functional groups in biopolymers are connected, causing the rearrangement of EPS molecular conformation that forms larger and denser agglomerates. Reduced solvent accessible surface area, enhanced hydrophobicity, and increased binding free energy lead to a strong gel-like network of EPS. Ca²⁺ and Al³⁺ predominantly interact with functional groups in polysaccharides, promoting agglomeration of macromolecules. In contrast, Mg²⁺ and Al³⁺ disrupted the secondary structure of proteins, exposing hydrophobic interaction sites. Al³⁺ can better agglomerate biopolymers with its higher positive charge and shorter coordination distance as compared to Ca²⁺ and Mg²⁺, but compromised by the effect of hydration. This work offers a novel approach to explore the construction and molecular aggregation of EPS, enriching the theoretical basis for optimization of wastewater and sludge treatment.

Base type determines the effects of nucleoside monophosphates on microalgae-bacteria symbiotic systems

Microalgae are promising sources of clean energy. Bioflocculation by cocultured bacteria is an effective way to harvest microalgae. As a key foundation for microorganisms, phosphorus is theoretically effective in shaping microalgae production and flocculation. In this study, the impacts of 23 nucleoside monophosphates on Auxenochlorella pyrenoidosa growth, lipid synthesis, and self-settlement and on the symbiotic bacterial system were investigated. Adenosine monophosphate was the most effective in enhancing microalgae development (2.14-3.16 × 10⁸ cells/mL) and lipid production (average 10.48%) and resulted in a low settling velocity. Samples were divided into two groups, purine and pyrimidine feeding, according to a random forest analysis (OOB = 0%, p < 0.001). Purine feeding resulted in the highest soluble extracellular protein and polysaccharide secretion (p < 0.01). KEGG ortholog count prediction of functional genes related to biofilm formation was conducted using PICRUSt2, and significant upregulation (FC ≥ 1.77, p < 0.05) of the extracellular polymeric substance formation functional group was observed in the adenosine and guanosine treatments. The symbiotic bacterial community structure differed substantially between purine- and pyrimidine-feeding systems. In summary, these results indicated that the effect of nucleoside monophosphates on the microalgae-bacteria system is determined by the base type (purine or pyrimidine) rather than the molecular structure (cyclic or noncyclic).

Nutrient removal from biogas slurry and biogas upgrading by microalgae-fungi-bacteria co-cultivation under different carbon nanotubes concentration

In this study, Chlorella vulgaris, Ganoderma lucidum, and endophytic bacteria were co-cultivated with the stimulation of strigolactone analogs GR24 to prepare pellets. During the purification of biogas slurry and biogas, multi-walled carbon nanotubes (MWCNTs) were introduced to enhance the removal efficiencies of nutrients and CO₂. The results showed that both GR24 and MWCNTs affected the purification of biogas slurry and biogas. The maximum chemical oxygen demand, total nitrogen, total phosphorus, and CO₂ removal efficiencies of the Chlorella vulgaris-Ganoderma lucidum-endophytic bacterial symbionts were 82.57 ± 7.96% (P < 0.05), 82.14 ± 7.87% (P < 0.05), 84.27 ± 7.96% (P < 0.05), and 63.93 ± 6.22% (P < 0.05), respectively, with the induction of 10^-9 M GR24 and 1 mg L^-1 MWCNTs. Moreover, the growth and photosynthetic performance of the symbionts were consistent with the removal effects. The Chlorella vulgaris-Ganoderma lucidum-endophytic bacterial symbionts obtained high growth rates and enzyme activity with the maximum growth rate of 0.365 ± 0.03 d^-1, mean daily productivity of 0.182 ± 0.016 g L^-1 d^-1, and carbonic anhydrase activity of 31.07 ± 2.75 units, respectively. These results indicated that an appropriate concentration of GR24 and MWCNTs could promote the growth of symbionts, reinforce the purification effects of biogas slurry and biogas, and provide a new idea for the simultaneous purification of wastewater and biogas.

Advancement in algal bioremediation for organic, inorganic, and emerging pollutants

Rapidly changing bioremediation prospects are key drive to develop sustainable options that can offer extra benefits rather than only environmental remediation. Algal remediating is gaining utmost attention due to its mesmerising sustainable features, removing odour and toxicity, co-remediating numerous common and emerging inorganic and organic pollutants from gaseous and aqueous environments, and yielding biomass for a range of valuable products refining. Moreover, it also improves carbon footprint via carbon-capturing offers a better option than any other non-algal process for several high CO₂-emitting industries. Bio-uptake, bioadsorption, photodegradation, and biodegradation are the main mechanisms to remediate a range of common and emerging pollutants by various algae species. Bioadsorption was a dominant remediation mechanism among others implicating surface properties of pollutants and algal cell walls. Photodegradable pollutants were photodegraded by microalgae by adsorbing photons on the surface and intracellularly via stepwise photodissociation and breakdown. Biodegradation involves the transportation of selective pollutants intracellularly, and enzymes help to convert them into simpler non-toxic forms. Robust models are from the green microalgae group and are dominated by Chlorella species. This article compiles the advancements in microalgae-assisted pollutants remediation and value-addition under sustainable biorefinery prospects. Moreover, filling the knowledge gaps, and recommendations for developing an effective platform for emerging pollutants remediation and realization of commercial-scale algal bioremediation.

Model-based evaluation of the impacts of aeration on tightly bound and loosely bound extracellular polymeric substance production under non-steady-state conditions

Tightly bound extracellular polymeric substances (TB-EPS) and loosely bound extracellular polymeric substances (LB-EPS) affect the flocculability and settleability of sludge and the transfer of oxygen, which are highly related to aeration. In this study, we systemically evaluated the expanded unified model-TL2.1 for its long-term simulation of TB-EPS and LB-EPS. Two different aeration conditions and three different influent carbon sources were used to evaluate the model, and the simulation results fit well with the experimental data. TB-EPS and LB-EPS production increased with aeration intensity. The influence of aeration parameters on TB-EPS and LB-EPS production in a short-term batch system and long-term sequencing batch reactor (SBR) system was compared. The aeration parameters included the total transfer coefficient (k_La) and the concentration of dissolved oxygen at the interface (C_S). To ensure a high removal rate of substrates and ammonia nitrogen and achieve a stable active biomass concentration, the following aeration parameters can be adopted to reduce energy wastage during aeration: when C_S is 2 mg/L, k_La can be set above 30 h^-1 and below 50 h^-1; when k_La is 50 h^-1, C_S can be set above 1 mg/L and below 1.5 mg/L. This study systematically revealed the influence of aeration on TB-EPS and LB-EPS formation in an SBR system through a mathematical model, and it provides a theoretical basis for better understanding aeration.

Evaluating the role of algae in algal-bacterial granular sludge: Nutrient removal, microbial community and granular characteristics

Algal-bacterial granular sludge (ABGS) and bacterial granular sludge (BGS, control group) were operated over 240 days to investigate the role of algae in treating synthetic municipal wastewater. The results showed that algae significantly improved the removal efficiency of total nitrogen (TN). The nitrogen removal load of ABGS was 2.6 mg-N/g-VSS/day (22.8 %, light) and 1.1 mg-N/g-VSS/day (9.6 %, dark) higher than that of BGS, respectively, which was attributed to algae enhanced NH₃-N removal capacity in the anaerobic stage and increased the utilization efficiency of organics in denitrification. Algae increased the relative abundance of denitrifying bacteria, and ABGS (28.83 %) was higher than BGS (14.28 %). Moreover, the dominant phylum of algae was Chlorophyta (98.39 %), the chlorophyll-a was sustained at 1.28 ± 0.26 mg/g-VSS. Algae significantly increased the content of extracellular polymeric substances (EPS), and the increased polysaccharide came from the tightly bound EPS. This study expands the understanding of the role of algae in ABGS.

Enhanced nutrient removal and bioenergy production in microalgal photobioreactor following anaerobic membrane bioreactor for decarbonized wastewater treatment

This study investigated the nutrient removal, decarbonization potentials, and bioenergy production (i.e., algal biomass and biogas) between a membrane photobioreactor (MPBR) and a sequencing photobioreactor (SPBR) as the post-treatment process of an anaerobic membrane bioreactor (AnMBR) for municipal wastewater treatment. All photobioreactors without aeration showed favourable performance on AnMBR effluent polishing and bioenergy production. In comparison, MPBRs achieved higher removal efficiencies with 98.4 %-99.1 % NH4-N and 74.8 %-88.4 % PO4-P removal compared to the SPBRs with 41.1 %-82.0 % NH4-N and 39.6 %-72.9 % PO4-P removal. MPBRs enhanced more nutrient utilization (24.9-49.3 g(N)/(m3·d) and 3.4-8.1 g(P)/(m3·d)) and CO2 assimilation (22.9-43.4 g(C)/(m3·d)), and concentrated more microalgae with 1.58-1.98 g/L higher than the SPBRs. Moreover, the MPBR effectively upgraded the biogas from AnMBR with superior methane percentage of 89.4 %-93.4 % due to its better CO2 biofixation. The MPBR, with better carbon, nitrogen and phosphorous removal and bioenergy production, following AnMBR is an attractive decarbonized technology for future sustainable wastewater treatment.

Understanding the influence of free nitrous acid on microalgal-bacterial consortium in wastewater treatment: A critical review

Microalgal-bacterial consortium (MBC) constitutes a sustainable and efficient alternative to the conventional activated sludge process for wastewater treatment (WWT). Recently, integrating the MBC process with nitritation (i.e., shortcut MBC) has been proposed to achieve added benefits of reduced carbon and aeration requirements. In the shortcut MBC system, nitrite or free nitrous acid (FNA) accumulation exerts antimicrobial influences that disrupt the stable process performance. In this review, the formation and interactions that influence the performance of the MBC were firstly summarized. Then the influence of FNA on microalgal and bacterial monocultures and related mechanisms together with the knowledge gaps of FNA influence on the shortcut MBC were highlighted. Other challenges and future perspectives that impact the scale-up of the shortcut MBC for WWT were illustrated. A potential roadmap is proposed on how to maximize the stable operation of the shortcut MBC system for sustainable WWT and high-value biomass production.

Efficient removal of Imidacloprid and nutrients by algae-bacteria biofilm reactor (ABBR) in municipal wastewater: Performance, mechanisms and the importance of illumination

Neonicotinoids, such as Imidacloprid (IMI), are frequently detected in water and wastewater, posing a threat on both the environment and the health of living things. In this work, a novel algae-bacteria biofilm reactor (ABBR) was constructed to remove IMI and conventional nutrients from municipal wastewater, aiming to explore the removal effect and advantage of ABBR. Results showed that ABBR achieved 74.9% removal of IMI under 80 μmol m^-2·s^-1 light, higher than photobioreactor (PBR) without biofilm (61.2%) or ABBR under 40 μmol m^-2·s^-1 light (48.4%) after 16 days of operation. Moreover, it also showed that ABBR allowed a marked improvement on the removal of total dissolved nitrogen (TDN), total dissolved phosphorus (TDP) and soluble chemical oxygen demand (sCOD). ABBR showed different IMI removal efficiencies and bacterial communities under different light conditions, indicating that light played an important role in driving ABBR. The merits of ABBR are including (i) ABBR showed rapid pollutant removal in a short time, (ii) in ABBR, stable consortiums were formed and chlorophyll content in effluent was very low, (iii) compared with PBR, degradation products in ABBR showed lower biological toxicity. Our study highlights the benefits of ABBR on IMI removing from municipal wastewater and provides an effective and environment-friendly engineering application potential of IMI removal.

Low energy harvesting of hydrophobic microalgae (Tribonema sp.) by electro-flotation without coagulation

Microalgae have great potential for biofuel production and wastewater treatment, but the high cost of harvesting hinders their practical application. In this study, economical harvesting of hydrophobic microalgae by electro-flotation without coagulation was assessed. The harvesting performance of this method for selected species of freshwater microalgae with different degrees of hydrophobicity (Tribonema sp., highly hydrophobic; Scenedesmus sp., moderately hydrophobic; and Pandorina sp., hydrophilic) were compared. It was found that microalgal hydrophobicity played a critical role in electro-flotation. Under the same condition (current 0.3 A, velocity gradient 200 s^-1, biomass concentration 1 g/L), Tribonema sp. could be effectively harvested (96.2 ± 0.4%) after 20 min of electro-flotation, while the harvesting efficiency decreased significantly with Scenedesmus sp. (70.1 ± 5.2%, 20 min) and Pandorina sp. (<10%, 1 h). The influences of current, electrolysis time, mixing intensity (velocity gradient) and biomass concentration on Tribonema sp. (hydrophobic) harvesting were further investigated. Increasing the current within a certain range (0.1 A-0.4 A) was beneficial to harvesting, while it's further increase decreased floating velocity, which was similar to the effect of the velocity gradient. Under the optimal condition, the harvesting efficiency of Tribonema sp. was 96.3% and the energy consumption (0.19 kWh/kg biomass) was much lower than other harvesting techniques, indicating that electro-flotation is a time-saving and economical approach for hydrophobic microalgae harvesting.

N-Acyl-Homoserine Lactone (AHL)-Mediated Microalgal-Bacterial Communication Driving Chlorella-Activated Sludge Bacterial Biofloc Formation

N-acyl-homoserine lactones (AHLs) as autoinducers of Gram-negative bacteria for quorum sensing regulation have shown positive effects on the production of aromatic proteins in extracellular polymeric substances (EPSs) during bioflocculation. To investigate the role of AHLs in aromatic protein production, a Chlorella-bacteria system with great bioflocculation was established via fed-batch cultivation. Tryptophan and aromatic proteins as the main compounds in the EPS of bioflocs showed an increasing trend during fed-batch cultivation. The Chlorella cells only secreted tryptophan rather than aromatic proteins during axenic cultivation. N-dodecanoyl-l-homoserine lactone (C12-HSL) was correlated with the flocculation activity and extracellular protein content of bioflocs during fed-batch cultivation. The addition of exogenous C12-HSL enhanced the flocculation activity of the Chlorella-bacteria system and aromatic protein production in the EPS. Chlorella cells sensed exogenous C12-HSL and significantly upregulated the aromatic protein synthesis pathway during axenic cultivation. In addition, vanillin as a quorum-sensing inhibitor suppressed the positive effect of C12-HSL on flocculation activity and aromatic protein production and synthesis. This result indicated that vanillin intercepts the response of Chlorella cells to C12-HSL. Overall, C12-HSL is supposed to be an important signal molecule to achieve communication between Chlorella and Gram-negative bacteria and subsequently induce Chlorella cells to produce aromatic proteins for biofloc formation.

Synthesis, performance, and mechanisms of strontium ferrite-incorporated zeolite imidazole framework (ZIF-8) for the simultaneous removal of Pb(II) and tetracycline

In this study, strontium ferrite (SF)-incorporated zeolite imidazole framework (ZIF-8) (SFZIF-8) that can simultaneously uptake Pb(II) and tetracycline (TC) in solution was synthesized and characterized. The physicochemical properties of the as-prepared SFZIF-8 were characterized by various functional groups, higher average pore diameter (3.414 nm), and stronger negative charge (-30.5 mV). Adsorption kinetics, isotherms, effect of various water conditions including solution pH and temperature, and reusability were studied to evaluate its adsorption performance. The adsorption capacity of SFZIF-8 was compared with that of commonly used adsorbents (powder and granular activated carbon). SFZIF-8 showed much higher adsorption performance (429.6 mg/g and 433.4 mg/g for Pb(II) and TC, respectively) than powder activated carbon (129.9 mg/g and 142.0 mg/g for Pb(II) and TC, respectively) and granular activated carbon (249.3 mg/g and 263.0 mg/g for Pb(II) and TC, respectively) in Pb(II) and TC binary solutions. The SFZIF-8 adsorption behaviors for the removal of Pb(II) and TC were explained by the pseudo-first-order and Langmuir models from the adsorption kinetics and isotherm experiments, respectively. The regenerated SFZIF-8 exhibited a competitive performance even after the third cycle. These results indicate that Pb(II) and TC can be removed with SFZIF-8 via electrostatic attraction, surface complexation, hydrogen bonding, and π-π interactions. Therefore, by exhibiting effective and efficient adsorption performance, SFZIF-8 nanocomposites can be utilized as alternative and promising adsorbents for the simultaneous removal of both Pb(II) and TC.

Dual-bioaugmentation strategy to enhance the formation of algal-bacteria symbiosis biofloc in aquaculture wastewater supplemented with agricultural wastes as an alternative nutrient sources and biomass support materials

This study performs an integrated evaluation of the formation and distribution of algal-bacterial bioflocs in aquaculture wastewater supplemented with agricultural waste, together with an assessment of their behavior in the microbial community and of the water quality of the system in which a new bioaugmentation strategy was applied. Results indicated that the dual bioaugmentation strategy via the consortium addition of bacteria and microalgae had the highest formation performance, providing the most compact biofloc structure (0.59 g/L), excellent settleability (71.91%), and a large particle diameter (4.25 mm). The fed-batch supplementation of molasses and rice bran, in terms of changes in the values of COD, NH₄⁺, NO₃^-, and PO₄^3-, stimulated the formation of biofloc through algal-bacterial bioflocs and microbe-rice bran complexes within a well-established microbial community. These findings provide new insight into the influence of bioaugmentation on the formation of an innovative algal-bacterial biofloc.

Biogranulation process facilitates cost-efficient resources recovery from microalgae-based wastewater treatment systems and the creation of a circular bioeconomy

Energy self-sufficient wastewater treatment designs can reduce net energy consumption and achieve resources recovery. Microalgae are regarded as a promising candidate for developing a circular bioeconomy in wastewater treatment plants (WWTPs) due to its potential for simultaneous wastewater remediation and high value-added materials production. Much effort has been made to overcome the high production costs for microalgae; however, biomass harvesting still remains as the bottleneck for its large-scale application. In this study, the novel biogranulation system facilitating easier and faster microalgae harvesting was firstly compared with the conventional suspended culture for energy-efficiency and sustainability assessment on microalgae (Ankistrodesmus falcatus var. acicularis) cultivation using the synthetic anaerobic digestion liquor. Results demonstrated that the biogranulation system enhanced volumetric biomass productivity (223.17 ± 11.82 g/m³/day) by about 4.4 times compared to that from the suspended system (41.57 ± 2.08 g/m³/day) under the same environmental conditions. It was noticed that lipids, carbohydrates and proteins were accumulated in microalgae cells along with nutrients remediation, and the microalgae granules with much higher proteins content (313.28 ± 26.67 mg/g-VSS) could be easily harvested through 2 min gravity sedimentation with little impact on the contents of carbohydrates and lipids. In the whole cultivation and harvesting process, the biomass mass-based electricity consumption and footprint demand by the biogranulation system were reduced by 58% and 76%, respectively. Results from this study provide a cost-effective and sustainable approach for microalgae in the treatment of nutrients rich digestion liquor with simultaneous production of valuable biomaterials.

Organic wastes bioremediation and its changing prospects

Increasing inappropriate anthropogenic activities and industrialization have resulted in severe environmental pollution worldwide. Their effective treatment is vital for general health concerns. Depending on the characteristics of pollutants, the severity of pollution may differ. For sustainable treatment of polluted environments, bioremediation is accepted as the most efficient, economical, and environmentally friendly method hence largely preferred. However, every bioremediation technique has its own unique advantages and limitations due to its defined applications criteria. In bioremediation, microorganisms play a decisive role in detoxification by degrading, mineralizing and accumulating various forms of harmful and biodegradable pollutants from the surroundings and transforming them into less lethal forms. Bioremediation is performed ex-situ or in-situ, based on location of polluted site as well as characteristics, type and strength of the pollutants. Furthermore, the most popular methodologies for bioremediation include bioaugmentation, biostimulation, bioattenuation among others which depend on the prevailing environmental factors into the microbial system. Implementing them appropriately and effectively under ex-situ or in-situ method is extremely important not only for obtaining efficient treatment but also for the best economic, environmental, and social impacts. Therefore, this review aims to analyze various bioremediation methods for organic pollutants remediation from soil/sediments and wastewater, their strength, limitation, and insights for the selection of appropriate bioremediation techniques based on nature, types, degree, and location of the pollution. The novelty aspect of the article is to give updates on several key supporting technologies which have recently emerged and exhibited great potential to enhance the present bioremediation efficiency such as nanobubble, engineered biochar, mixotrophic microalgae, nanotechnology etc. Moreover, amalgamation of these technologies with existing bioremediation facilities are significantly changing the scenario and scope of environmental remediation towards sustainable bioremediation.

Respirometric assessment of bacterial kinetics in algae-bacteria and activated sludge processes

Algae-bacteria (AB) consortia can be exploited for effective wastewater treatment, based on photosynthetic oxygenation to reduce energy requirements for aeration. While algal kinetics have been extensively evaluated, bacterial kinetics in AB systems are still based on parameters taken from the activated sludge models, lacking an experimental validation for AB consortia. A respirometric procedure was therefore proposed, to estimate bacterial kinetics in both activated sludge and AB, under different conditions of temperature, pH, dissolved oxygen, and substrate availability. Bacterial activities were differently influenced by operational/environmental conditions, suggesting that the adoption of typical activated sludge parameters could be inadequate for AB modelling. Indeed, respirometric results show that bacteria in AB consortia were adapted to a wider range of conditions, compared to activated sludge, confirming that a dedicated calibration of bacterial kinetics is essential for effectively modelling AB systems, and respirometry was proven to be a powerful and reliable tool to this purpose.

Production, Processing, and Protection of Microalgal n-3 PUFA-Rich Oil

Microalgae have been increasingly considered as a sustainable “biofactory” with huge potentials to fill up the current and future shortages of food and nutrition. They have become an economically and technologically viable solution to produce a great diversity of high-value bioactive compounds, including n-3 polyunsaturated fatty acids (PUFA). The n-3 PUFA, especially eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), possess an array of biological activities and positively affect a number of diseases, including cardiovascular and neurodegenerative disorders. As such, the global market of n-3 PUFA has been increasing at a fast pace in the past two decades. Nowadays, the supply of n-3 PUFA is facing serious challenges as a result of global warming and maximal/over marine fisheries catches. Although increasing rapidly in recent years, aquaculture as an alternative source of n-3 PUFA appears insufficient to meet the fast increase in consumption and market demand. Therefore, the cultivation of microalgae stands out as a potential solution to meet the shortages of the n-3 PUFA market and provides unique fatty acids for the special groups of the population. This review focuses on the biosynthesis pathways and recombinant engineering approaches that can be used to enhance the production of n-3 PUFA, the impact of environmental conditions in heterotrophic cultivation on n-3 PUFA production, and the technologies that have been applied in the food industry to extract and purify oil in microalgae and protect n-3 PUFA from oxidation.

A comprehensive review on the use of algal-bacterial systems for wastewater treatment with emphasis on nutrient and micropollutant removal

The scarcity of water resources and environmental pollution have highlighted the need for sustainable wastewater treatment. Existing conventional treatment systems are energy-intensive and not always able to meet stringent disposal standards. Recently, algal-bacterial systems have emerged as environmentally friendly sustainable processes for wastewater treatment and resource recovery. The algal-bacterial systems work on the principle of the symbiotic relationship between algae and bacteria. This paper comprehensively discusses the most recent studies on algal-bacterial systems for wastewater treatment, factors affecting the treatment, and aspects of resource recovery from the biomass. The algal-bacterial interaction includes cell-to-cell communication, substrate exchange, and horizontal gene transfer. The quorum sensing (QS) molecules and their effects on algal-bacterial interactions are briefly discussed. The effect of the factors such as pH, temperature, C/N/P ratio, light intensity, and external aeration on the algal-bacterial systems have been discussed. An overview of the modeling aspects of algal-bacterial systems has been provided. The algal-bacterial systems have the potential for removing micropollutants because of the diverse possible interactions between algae-bacteria. The removal mechanisms of micropollutants - sorption, biodegradation, and photodegradation, have been reviewed. The harvesting methods and resource recovery aspects have been presented. The major challenges associated with algal-bacterial systems for real scale implementation and future perspectives have been discussed. Integrating wastewater treatment with the algal biorefinery concept reduces the overall waste component in a wastewater treatment system by converting the biomass into a useful product, resulting in a sustainable system that contributes to the circular bioeconomy.

Performance of different microalgae-fungi-bacteria co-culture technologies in photosynthetic and removal performance in response to various GR24 concentrations

The purification effect of two different microalgae-fungi-bacteria symbiosis technologies on biogas and biogas slurry was studied to determine the best symbiosis treatment technology and the suitable concentration of GR24. The results showed that the purification effect of biogas slurry in Chlorella vulgaris-Ganoderma lucidum-endophytic bacteria (S395-2) symbiont co-culture system was better than that of the biogas slurry in Scenedesmus obliquus-Pleurotus ostreatus-S395-2 symbionts. Following 10^-9 M GR24 treatment, Chlorella vulgaris-Ganoderma lucidum-S395-2 symbionts had elevated mean daily production rate and growth rate by 1.92 and 1.46 folds in comparison with blank group. After adjusting the GR24 level within the range of 10^-9 M-10^-7 M, Ganoderma lucidum-assisted Chlorella vulgaris-S395-2 attained higher maximal removal rates for TN, COD, CO₂, and TP by 10.78%, 14.62%, 3.86%, and 9.07%, respectively, compared to the rates when GR24 was not added.

Microalgae harvesting techniques: updates and recent technological interventions

Microalgal biomass has garnered attention as a renewable and sustainable resource for producing biodiesel. The harvesting of microalgal biomass is a significant bottleneck being faced by the industries as it is the crucial cost driver in the downstream processing of biomass. Bioharvesting of microalgal biomass mediated by: microbial, animal, and plant-based polymeric flocculants has gained a higher probability of utility in accumulation due to: its higher dewatering potential, less toxicity, and ecofriendly properties. The present review summarizes the key challenges and the technological advancements associated with various such harvesting techniques. The economic and technical aspects of different microalgal harvesting techniques, particularly the cationic polymeric flocculant-based harvesting of microalgal biomass, are also discussed. Furthermore, interactions of flocculants with microalgal biomass and the effects of these interactions on metabolite and lipid extractions are discussed to offer a promising solution for suitability in selecting the most efficient and economical method of microalgal biomass harvesting for cost-effective biodiesel production.

A bacterial strain Citrobacter W4 facilitates the bio-flocculation of wastewater cultured microalgae Chlorella pyrenoidosa

A bacteria strain Citrobacter W4 isolated from the microalgae sewage culture system showed flocculating activity against Chlorella pyrenoidosa. In this work, operation parameters under outdoor conditions were optimized. When the bacterial-algal ratio was 4:1, G value was 26.30 s^-1, and harvesting time was 6 h, the harvesting efficiency achieved 87.37 ± 2.96% without ions addition and pH adjustment. The microbial community structure analysis showed Citrobacter W4 was dominant in the harvesting process. Flocculating active substances were on the surface and metabolites of Citrobacter W4. The main component of bacteria flocculating active substances was protein. Polysaccharides and carboxylic acid also promoted flocculation. The flocculation mechanisms were mainly adsorption bridging, net catching, and sweeping, not electric neutralization. The quality of FAMEs was improved after flocculation. The cost of 1 kg dried microalgae flocculated by Citrobacter W4 was $1.35. The novel flocculating bacteria showed the potential to harvest microalgae cost-effectively and environmentally friendly.

Constructed microalgal-bacterial symbiotic (MBS) system: Classification, performance, partnerships and perspectives

The microalgal-bacterial symbiotic (MBS) system shows great advantages in the synchronous implementation of wastewater treatment and nutrient recovery. To enhance the understanding of different MBS systems, this review summarizes reported MBS systems and proposes three patterns according to the living state of microalgae and bacteria. They are free microalgal-bacterial (FMB) system, attached microalgal-bacterial (AMB) system and bioflocculated microalgal-bacterial (BMB) system. Compared with the other two patterns, BMB system shows the advantages of microalgal biomass harvesting and application. To further understand the microalgal-bacterial partnerships in the bioflocculation of BMB system, this review discusses bioflocs characteristics, extracellular polymeric substances (EPS) properties and production, and the effect of microalgae/bacteria ratio and microalgal strains on the formation of bioflocculation. Microalgal biomass production and application are important for BMB system development in the future. Food processing wastewater characterized by high biodegradability and low toxicity should be conducive for microalgal cultivation. In addition, exogenous addition of functional bacteria for nutrient removal and bioflocculation formation would be a crucial research direction to facilitate the large-scale application of BMB system.

Green biorefinery: Microalgae-bacteria microbiome on tolerance investigations in plants

Co-culture of microalgae and microorganisms, supported with the resulting synergistic effects, can be used for wastewater treatment, biomass production, agricultural applications and etc. Therefore, this study aimed to explore the role of Bacillus subtilis (B. subtilis) in tolerance against the harsh environment of seafood wastewater, at which these microalgal-bacterial flocs were formed by microalgae cultivation. In this present study, B. subtilis isolated from the cultivation medium of Chlorella vulgaris and exposed to different salinity (0.1-4% w/v sodium chloride) and various pH range to determine the tolerant ability and biofilm formation. Interestingly, this bacteria strain that isolated from microalgae cultivation medium showed the intense viability in the salt concentration exceeding up to 4% (w/v) NaCl but demonstrated the decrease in cell division as environmental culture undergoing over pH 10. Cell viability was recorded higher than 71% and 92% for B. subtilis inoculum in media with salt concentration greater than 20 gL^-1 and external pH 6.5-9, respectively. This showed that B. subtilis isolated from microalgal-bacteria cocultivation exhibited its tolerant ability to survive in the extremely harsh conditions and thus, mitigating the stresses due to salinity and pH.

Mass cultivation and harvesting of microalgal biomass: Current trends and future perspectives

Microalgae are unicellular photosynthetic organisms capable of producing high-value metabolites like carbohydrates, lipids, proteins, polyunsaturated fatty acids, vitamins, pigments, and other high-value metabolites. Microalgal biomass gained more interest for the production of nutraceuticals, pharmaceuticals, therapeutics, food supplements, feed, biofuel, bio-fertilizers, etc. due to its high lipid and other high-value metabolite content. Microalgal biomass has the potential to convert trapped solar energy to organic materials and potential metabolites of nutraceutical and industrial interest. They have higher efficiency to fix carbon dioxide (CO₂) and subsequently convert it into biomass and compounds of potential interest. However, to make microalgae a potential industrial candidate, cost-effective cultivation systems and harvesting methods for increasing biomass yield and reducing the cost of downstream processing have become extremely urgent and important. In this review, the current development in different microalgal cultivation systems and harvesting methods has been discussed.

Converting nitrogen and phosphorus wastewater into bioenergy using microalgae-bacteria consortia: A critical review

Conventional wastewater treatment using activated sludge cannot efficiently eliminate nitrogen and phosphorus, thus engendering the risk of water eutrophication and ecosystem disruption. Fortunately, a new wastewater treatment process applying microalgae-bacteria consortia has attracted considerable interests due to its excellent performance of nutrients removal. Moreover, some bacteria facilitate the harvest of microalgal biomass through bio-flocculation. Additionally, while stimulating the functional bacteria, the improved biomass and enriched components also brighten bioenergy production from the perspective of practical applications. Thus, this review first summarizes the current development of nutrients removal and mutualistic interaction using microalgae-bacteria consortia. Then, advancements in bio-flocculation are completely described and the corresponding mechanisms are thoroughly revealed. Eventually, the recent advances of bioenergy production (i.e., biodiesel, biohydrogen, bioethanol, and bioelectricity) using microalgae-bacteria consortia are comprehensively discussed. Together, this review will provide the ongoing challenges and future developmental directions for better converting nitrogen and phosphorus wastewater into bioenergy using microalgae-bacteria consortia.

The use of natural organic flocculants for harvesting microalgae grown in municipal wastewater at different culture densities

Harvesting microalgae from liquid culture is a difficult issue to solve and is most commonly done through settling. However, settling is a slow process on its own and generally needs to be induced chemically or by introducing stress to the culture. Polymeric, cationic substances, such as cationised starch and chitosan, are often used for flocculation and settling. These large, positively charged molecules form large clusters with suspended particles in the liquid medium. In the present study, three natural organic flocculants (cationic starch, chitosan and acacia tannin S5T) were tested to harvest microalgal cultures grown in wastewater. Two microalgal species, one strain of Chlorella vulgaris and one strain of Scenedesmus obliquus, were cultured in municipal wastewater for different lengths of time, and settled using either cationic starch, chitosan or acacia tannin S5T. Results indicated that S5T worked with approximately the same efficiency in the two assayed species, although it requires a relatively high dosage to function (about 300 mg L^-1 ), while the other two flocculants varied from species to species.

Treatment of Synthetic Ammonium Sulfate Wastewater by Mixed Culture of Chlorella pyrenoidosa and Enriched Nitrobacteria

Ammonium sulfate wastewater can cause eutrophication and black odor of water body. Although ammonia nitrogen can be used as nutrient of microalgae, high ammonia nitrogen levels could inhibit the growth of microalgae. Nitrobacteria can transform ammonia nitrogen into nitrate nitrogen. In this study, mono Chlorella pyrenoidosa culture (mono-C.py), synchronous mixed culture (mixed-a), and asynchronous mixed culture (mixed-b) systems were examined for their ability to treat ammonium sulfate wastewater. Nitrogen removal rate of mixed-b at the end of culture (52.96%) was higher than that of the mono-C.py (46.37%) and the mixed-a (39.11%). Higher total suspended solid concentration (2.40 g/L), crude protein yield (0.76 g/L), and heating value yield (35.73 kJ/L) were obtained in mixed-b, meanwhile with excellent settlement performance (91.43 ± 0.51%). Mechanism analysis of settlement showed that the relative abundance of floc-forming-related bacteria Sphingopyxis and Acidovorax were increased generally, while nitrification/denitrifying members were decreased in mixed-b along with the culture proceeding.

Recent technologies for nutrient removal and recovery from wastewaters: A review

Water scarcity and its pollution has become a concern in recent times. The disposal of nutrient-rich (nitrogen and phosphorous) wastewater is also one of the main cause of water pollution through eutrophication, reduced dissolved oxygen that poses threat to aquatic ecosystems. As a result, nutrient removal has become a mandate apart from the removal of organics. However, the removal of nutrients from sewage is a challenging task. Conversely, conventional biological treatment processes provide little relief in nutrient removal. The treated effluents from conventional biological processes do not achieve the stringent nutrient removal disposal standard limits and become primary cause of pollution in the receiving water bodies. This has stressed upon the need for eco-friendly, low-energy and cost-efficient nutrient removal treatment technologies. Various biological treatment combinations or variants are in use for the efficient removal of nutrients. The biological processes in itself or in combination with chemical processes are preferred over technologies based solely on physico-chemical processes for its treatment performance at lower cost. This review summarizes the existing treatment processes and their possible up-gradation with the aim to accomplish the marked effluent standards for the nutrients. The concept of conventional systems and advanced systems for nutrients (nitrogen and phosphorous) removal which are already developed or under development are deeply discussed. Further, the challenges of each treatment systems are abridged. Finally, the possible suggestions for the modification/retrofitting of existing treatment systems for achieving stringent disposal standards are pointed out.

Role of extracellular polymeric substances on nutrients storage and transfer in algal-bacteria symbiosis sludge system treating wastewater

This study reported the role and significance of extracellular polymeric substances (EPSs) on nutrients storage and transfer in an algal-bacteria symbiosis sludge (ABSS) system for wastewater treatment, and the novel algae-based sequencing batch suspended biofilm reactor (A-SBSBR, Ra) was selected as model of ABSS system. Results showed that compared to conventional SBSBR, the EPS of Ra performed better storage for NO₂^--N, NO₃^--N, total phosphorus and PO₄^3- -P, with increase ratios of 43.7%, 36.0%, 34.1% and 14.7% in sludge phase and 174.0%, 147.4%, 150.4% and 122.0% in biofilm phase, respectively. The analysis of mechanisms demonstrated that microalgae active transport and uptake for divalent cations could enhance their local concentrations around ABS flocs and partially neutralized negative charge of EPSs, and more anions related to nutrients were absorbed in EPSs. Moreover, O₂ produced by microalgae photosynthesis enhanced bacteria activity and improved the production of EPSs in both sludge and biofilm phases.

Prospects and development of algal-bacterial biotechnology in environmental management and protection

The coexistence of algae and bacteria in nature dates back to the very early stages when life came into existence. The interaction between algae and bacteria plays an important role in the planet ecology, cycling nutrients, and feeding higher trophic levels, and have been evolving ever since. The emerging concept of algal-bacterial consortia is gaining attention, much towards environmental management and protection. Studies have shown that algal-bacterial synergy does not only promote carbon capture in wastewater bioremediation but also consequently produces biofuels from algal-bacterial biomass. This review has evaluated the optimistic prospects of algal-bacterial consortia in environmental remediation, biorefinery, carbon sequestration as well as its contribution to the production of high-value compounds. In addition, algal-bacterial consortia offer great potential in bloom control, dye removal, agricultural biofertilizers, and bioplastics production. This work also emphasizes the advancement of algal-bacterial biotechnology in environmental management through the incorporation of Industry Revolution 4.0 technologies. The challenges include its pathway to greener industry, competition with other food additive sources, societal acceptance, cost feasibility, environmental trade-off, safety and compatibility. Thus, there is a need for further in-depth research to ensure the environmental sustainability and feasibility of algal-bacterial consortia to meet numerous current and future needs of society in the long run.

Integrating gravity settler with an algal membrane photobioreactor for in situ biomass concentration and harvesting

Gravity settler was integrated into an algal membrane photobioreactor (MPBR) for in situ biomass concentration and harvesting of Graesiella emersonii. By continuous circulation of suspended biomass between MPBR and settler, biomass was sedimented in the settler and harvested. MPBR-Settler operations at different recirculation rates (0.15-2.4 L/d) and settler volumes (250-1000 mL) affected both suspended (0.4-3.4 g/L) and settled (16.1-31.1 g/L) biomass concentrations. Maximum biomass productivity of 0.26 ± 0.06 g/L/d was achieved in the 1000 mL settler operating at 0.6 L/d recirculation rate, which also yielded 9-131 times concentrated biomass (31.1 g/L) compared to the baseline MPBR (0.2-3.4 g/L). This novel design also facilitated MPBR operation at low solids retention times (6-8 d) without incurring large outflow of unfiltered effluent, while alleviating light limitation via biomass dilution. These results demonstrated that the MPBR-Settler system can provide an excellent way to mitigate light limitation, enhance biomass productivity, and simplify biomass harvesting.

A review on microalgae cultivation and harvesting, and their biomass extraction processing using ionic liquids

The richness of high-value bio-compounds derived from microalgae has made microalgae a promising and sustainable source of useful product. The present work starts with a review on the usage of open pond and photobioreactor in culturing various microalgae strains, followed by an in-depth evaluation on the common harvesting techniques used to collect microalgae from culture medium. The harvesting methods discussed include filtration, centrifugation, flocculation, and flotation. Additionally, the advanced extraction technologies using ionic liquids as extractive solvents applied to extract high-value bio-compounds such as lipids, carbohydrates, proteins, and other bioactive compounds from microalgae biomass are summarized and discussed. However, more work needs to be done to fully utilize the potential of microalgae biomass for the application in large-scale production of biofuels, food additives, and nutritive supplements.

A comprehensive review on cultivation and harvesting of microalgae for biodiesel production: Environmental pollution control and future directions

Biodiesel is one of the best promising candidates in response to the energy crisis, since it has the capability to minimize most of the environmental problems. Microalgae, as the feedstock of third-generation biodiesel, are considered as one of the most sustainable resources. However, microalgae production for biodiesel feedstock on a large scale is still limited, because of the influences of lipid contents, biomass productivities, lipid extraction technologies, the water used in microalgae cultivation and processes of biomass harvesting. This paper firstly reviews the recent advances in microalgae cultivation and growth processes. Subsequently, current microalgae harvesting technologies are summarized and flocculation mechanisms are analyzed, while the characteristics that the ideal harvesting methods should have are summarized. This review also summarizes the environmental pollution control performances and the key challenges in future. The key suggestions and conclusions in the paper can offer a promising roadmap for the cost-effective biodiesel production.