Alkaline post-incubation improves cellulose hydrolysis after γ-valerolactone/water pretreatment

Valorization of Lignocellulose with One-Step Acidified Monophasic Phenoxyethanol Fractionation

Effective fractionation of lignocelluosic biomass and subsequent valorization of all three major components under mild conditions were achieved. Pretreatment with acidified monophasic phenoxyethanol (EPH) efficiently removed 92.6 % lignin and 80 % xylan from poplar at 110 °C in 60 min, yielding high-value EPH-xyloside, EPH-modified lignin (EPHL), and a solid residue nearly purely composed of carbohydrates. After removing the grafted acetyl groups using 1 % NaOH at 50 °C, the highest enzymatic digestibility reached 92.3 %. EPHL could be recovered in high yield and purity with an uncondensed structure, while xylose was converted to EPH-xyloside, a potential precursor in biomedical industries. Additionally, the acidified monophasic EPH solvent could effectively fractionate biomass from species other than hardwood, achieving over 70 % delignification from recalcitrant pinewood under the same mild conditions, demonstrating the high potential of monophasic EPH pretreatment.

Mild γ-Butyrolactone/Water Pretreatment for Highly Efficient Sugar Production from Corn Stover

In this study, γ-butyrolactone/water (GBL/H2O) was explored as a mild, efficient, and cost-effective binary solvent pretreatment to enhance hydrolyzability of corn stover (CS). Key pretreatment parameters-reaction time, temperature, and H2SO4 concentration-were systematically investigated for their effects on the physicochemical properties of CS. Specifically, increased temperature and acid concentration significantly decreased cellulose crystallinity (from 1.39 for untreated CS to 1.04 for CS pretreated by GBL/H2O with 100 mM H2SO4 at 120 °C for 1 h) and promoted lignin removal (47.3% for CS pretreated by GBL/H2O with 150 mM H2SO4 at 120 °C for 1 h). Acknowledging the cellulase's limited hydrolysis efficiency, a dual-enzyme scheme using a low cellulase dosage (10 FPU/g) supplemented with β-glucosidase or xylanase was tested, enhancing hydrolysis of CS pretreated under low temperature-long duration and high temperature-short duration conditions, respectively. Optimum sugar release was obtained from CS pretreated with GBL/H2O and 150 mM H2SO4 at 120 °C for 1 h, achieving 98% glucan and 82.3% xylan conversion, compared with 53.9% and 17% of glucan and xylan conversion from untreated CS. GBL/H2O pretreatment outperformed other binary systems in literature, achieving the highest sugar conversions with lower enzyme loading. These results highlight the potential of GBL/H2O pretreatment for efficient biomass conversion, contributing to the goals of the green economy.

Recent Advances in Application of Polyoxometalates in Lignocellulose Pretreatment and Transformation

Lignocellulose, composed of cellulose, hemicellulose, and lignin, holds immense promise as a renewable resource for the production of sustainable chemicals and fuels. Unlocking the full potential of lignocellulose requires efficient pretreatment strategies. In this comprehensive review, efforts were taken to survey the latest developments in polyoxometalates (POMs)-assisted pretreatment and conversion of lignocellulosic biomass. An outstanding finding highlighted in this review is that the deformation of the cellulose structure from I to II accompanied by the removal of xylan/lignin through the synergistic effect of ionic liquids (ILs) and POMs resulted in a significant increase in glucose yield and improved cellulose digestibility. Furthermore, successful integration of POMs with deep eutectic solvents (DES) or γ-valerolactone/water (GVL/water) systems has demonstrated efficient lignin removal, opening avenues for advanced biomass utilization. This review not only presents the key findings and novel approaches in POMs-based pretreatment but also addresses the current challenges and prospects for large-scale industrial implementation. By offering a comprehensive assessment of the progress in this field, this review serves as a valuable resource for researchers and industry professionals aiming to harness the potential of lignocellulosic biomass for sustainable chemical and fuel production.

Advances in organosolv modified components occurring during the organosolv pretreatment of lignocellulosic biomass

The valorization of organosolv pretreatment (OP) is a required approach to the industrialization of the current enzyme-mediated lignocellulosic biorefinery. Recent literature has demonstrated that the solvolysis happening in the OP can modify the soluble components into value-added active compounds, namely organosolv modified lignin (OML) and organosolv modified sugars (OMSs), in addition to protecting them against excessive degradation. Among them, the OML is coincidental with the "lignin-first" strategy that should render a highly reactive lignin enriched with β-O-4 linkages and less condensed structure by organosolv grafting, which is desirable for the transformation into phenolic compounds. The OMSs are valuable glycosidic compounds mainly synthesized by trans-glycosylation, which can find potential applications in cosmetics, foods, and healthcare. Therefore, a state-of-the-art OP holds a big promise of lowering the process cost by the valorization of these active compounds. Recent advances in organosolv modified components are reviewed, and perspectives are made for addressing future challenges.

Applications of biomass-derived solvents in biomass pretreatment - Strategies, challenges, and prospects

Biomass pretreatment is considered a key step in the 2nd generation biofuel production from lignocellulosic biomass. Research on conventional biomass pretreatment solvents has mainly been focused on carbohydrate conversion efficiency, while their hazardousness and/or carbon intensity were not comprehensively considered. Recent sustainability issues request further consideration for eco-friendly and sustainable alternatives like biomass-derived solvents. Carbohydrate and lignin-derived solvents have been proposed and investigated as green alternatives in many biomass processes. In this review, the applications of different types of biomass pretreatment solvents, including organic, ionic liquid, and deep eutectic solvents, are thoroughly discussed. The role of water as a co-solvent in these pretreatment processes is also reviewed. Finally, current research challenges and prospects of utilizing biomass-derived pretreatment solvents for pretreatment are discussed. Given bioethanol's market potential and increasing public awareness about environmental concerns, it will be a priority adopting sustainable and green biomass pretreatment solvents in biorefinery.

Enhanced lignin removal and enzymolysis efficiency of grass waste by hydrogen peroxide synergized dilute alkali pretreatment

Pretreatment process plays a key role in biofuel production from lignocellulosic feedstocks. A study on dilute NaOH pretreatment supplemented with H₂O₂ under mild condition was conducted to overcome the recalcitrance of grass waste (GW). The optimized process could selectively increase lignin removal (73.2%), resulting in high overall recovery of holocellulose (73.8%) as well as high enzymolysis efficiency (83.5%) compared to H₂O₂ or NaOH pretreatment. The analyses by Scanning electron microscopy (SEM), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR) revealed that supplementary H₂O₂ disrupted the structure of GW to facilitate the removal of lignin by NaOH, and exhibited synergistic effect on lignin removal and enzymolysis with dilute NaOH. Moreover, high titer of ethanol (100.7 g/L) was achieved by SSCF on 30% (w/v) pretreated GW loading. The present study suggests that the established synergistic pretreatment is a simple, efficient, and promising process for GW biorefinery.

Lignin extracted by γ-valerolactone/water from corn stover improves cellulose enzymatic hydrolysis

The impact of lignin extracted from γ-valerolactone/water (GVL/H₂O) pretreatment of corn stover on the enzymatic hydrolysis of cellulose was investigated. Two lignin samples were separated and named as GL25 and GL75 according to the amounts of sulfuric acid (25 mM and 75 mM) used in the GVL/H₂O pretreatment. With the addition of 2 g/L of GL25 and GL75, the glucan conversion of enzymatic hydrolysis of Avicel improved markedly from 28.0% to 37.4% and 31.3%, respectively. Moreover, the improvement of glucan conversion increased when increasing the loadings of GL25 and GL75. A similar observation was made when GVL/H₂O pretreated corn stover was the substrate. The results of the cellulase adsorption experiments showed that the GLs had a lower maximum cellulase adsorption capacity and binding strength compared to that of acid-insoluble lignin. Further structural characterization of the GLs revealed that they had a low zeta-potential and hydrophobicity, but a high Syringyl/Guaiacyl ratio.

Effects of Gamma-Valerolactone Assisted Fractionation of Ball-Milled Pine Wood on Lignin Extraction and Its Characterization as Well as Its Corresponding Cellulose Digestion

Gamma-valerolactone (GVL) was found to be an effective, sustainable alternative in the lignocellulose defragmentation for carbohydrate isolation and, more specifically, for lignin dissolution. In this study, it was adapted as a green pretreatment reagent for milled pinewood biomass. The pretreatment evaluation was performed for temperature (140–180 °C) and reaction time (2–4 h) using 80% aqueous GVL to obtain the highest enzymatic digestibility of 92% and highest lignin yield of 33%. Moreover, the results revealed a positive correlation (R2 = 0.82) between the lignin removal rate and the crystallinity index of the treated biomass. Moreover, under the aforementioned conditions, lignin with varying molecular weights (150–300) was obtained by derivatization followed by reductive cleavage (DFRC). 2D heteronuclear single quantum coherence nuclear magnetic resonance (2D-HSQC-NMR) spectrum analysis and gel permeation chromatography (GPC) also revealed versatile lignin properties with relatively high β-O-4 linkages (23.8%–31.1%) as well as average molecular weights of 2847–4164 with a corresponding polydispersity of 2.54–2.96, indicating this lignin to be a heterogeneous feedstock for value-added applications of biomass. All this suggested that this gamma-valerolactone based pretreatment method, which is distinctively advantageous in terms of its effectiveness and sustainability, can indeed be a competitive option for lignocellulosic biorefineries.