Fate and removal of Ciprofloxacin in an anaerobic membrane bioreactor (AnMBR)

Anaerobic co-metabolic biodegradation of pharmaceuticals and personal care products driven by glycerol fermentation

Anaerobic digestion in two sequential phases, acidogenesis and methanogenesis, has been shown to be beneficial for enhancing the biomethane generation from wastewater. In this work, the application of glycerol (GOH) as a fermentation co-substrate during the wastewater treatment was evaluated on the biodegradation of different pharmaceuticals and personal care products (PPCPs). GOH co-digestion during acidogenesis led to a significant increase in the biodegradation of acetaminophen (from 78 to 89%), ciprofloxacin (from 25 to 46%), naproxen (from 73 to 86%), diclofenac (from 36 to 48%), ibuprofen (from 65 to 88%), metoprolol (from 45 to 59%), methylparaben (from 64 to 78%) and propylparaben (from 68 to 74%). The heterotrophic co-metabolism of PPCPs driven by glycerol was confirmed by the biodegradation kinetics, in which kbio (biodegradation kinetics constant) values increased from 0.18 to 2.11 to 0.27-3.60 L g-1-VSS d-1, for the operational phases without and with GOH, respectively. The assessment of metabolic pathways in each phase revealed that the prevalence of aromatic compounds degradation, metabolism of xenobiotics by cytochrome P450, and benzoate degradation routes during acidogenesis are key factors for the enzymatic mechanisms linked to the PPCPs co-metabolism. The phase separation of anaerobic digestion was effective in the PPCPs biodegradation, and the co-fermentation of glycerol provided an increase in the generation potential of biomethane in the system (energetic potential of 5.0 and 6.3 kJ g-1-CODremoved, without and with GOH, respectively). This study showed evidence that glycerol co-fermentation can exert a synergistic effect on the PPCPs removal during anaerobic digestion mediated by heterotrophic co-metabolism.

Towards sorptive eradication of pharmaceutical micro-pollutant ciprofloxacin from aquatic environment: A comprehensive review

Antibiotics are widely prioritized pharmaceuticals frequently adopted in medication for addressing numerous ailments of humans and animals. However, the non-judicious disposal of ciprofloxacin (CIP) with concentration levels exceeding threshold limit in an aqueous environment has been the matter of growing concern nowadays. CIP is found in various waterways with appreciable mobility due to its limited decay in solidified form. Hence, the effective eradication strategy of this non-steroidal anti-inflammatory antibiotic from aqueous media is pivotal for preventing the users and the biosphere from their hazardous impacts. Reportedly several customary techniques like reverse osmosis, precipitation, cross-filtration, nano-filtration, ion exchange, microbial remediation, and adsorption have been employed to eliminate CIP from water. Out of them, adsorption is ascertained to be a potential method because of lesser preliminary investment costs, ease of operation, greater efficiency, less energy usage, reduced chemical and biological slurry production, and ready availability of precursor materials. Towards remediation of ciprofloxacin-laden water, plenty of researchers have used different adsorbents. However, the present-day challenge is opting the promising sorbent and its application towards industrial scale-up which is vital to get reviewed. In this article, adsorbents of diverse origins are reviewed in terms of their performances in CIP removal. The review stresses the impact of various factors on sorptive assimilation of CIP, adsorption kinetics, isotherms, mechanism of ionic interaction, contrivances for CIP detection, cost estimation and reusability assessments of adsorbents also that may endorse the next-generation investigators to decide the efficacious, environmental appealing and cost-competitive adsorbents for effective riddance of CIP from wastewater.

Anaerobic removal of contaminants of emerging concern in municipal wastewater: Eco-toxicological risk evaluation and strategic selection of optimal treatment

In the last decades, the interest for anaerobic process as a mainstream treatment of municipal wastewater increased due to the development of high-rate anaerobic bioreactors able to achieve removal kinetics comparable to the aerobic ones. Moreover, they have the additional advantages of energy production, nutrient recovery and reduced excess sludge yield, which are interesting features in the frame of sustainability wastewater treatment goals. These appealing factors increased the research demand to evaluate the potential of the anaerobic removal for contaminants of emerging concern (CECs) in municipal wastewater. However, despite the growing interest for the subject, literature is still fragmentary and reviews are mainly focused on specific technologies and target compounds or groups of compounds. We propose this review with the main objectives of presenting the state of knowledge, the performances of anaerobic systems for CECs' removal and, more important, to give the reader guidelines for optimal treatment selection. In the first part, a general overview of the investigated technologies at different scale, with a special focus on the recently proposed enhancements, is presented. Collected data are analysed to select the target CECs and the analysis results employed to define the optimal technological solution for their removal. A first novelty element of the paper is the original procedure for contaminant selection consisting of a risk assessment tool for CECs, based on their frequency of detection, concentration and potential for biosorption in wastewater treatment plants. Data of selected target CECs are combined with compound and technology performance data to implement a flowchart tool to evaluate the optimal treatment strategy, which constitute another, even more important, novelty element of this study.

Membrane-based technology in water and resources recovery from the perspective of water social circulation: A review

In this review, the application of membrane-based technology in water social circulation was summarized. Water social circulation encompassed the entire process from the acquirement to discharge of water from natural environment for human living and development. The focus of this review was primarily on the membrane-based technology in recovery of water and other valuable resources such as mineral ions, nitrogen and phosphorus. The main text was divided into four main sections according to water flow in the social circulation: drinking water treatment, agricultural utilization, industrial waste recycling, and urban wastewater reuse. In drinking water treatment, the acquirement of water resources was of the most importance. Pressure-driven membranes, such as ultrafiltration (UF), nanofiltration (NF) and reverse osmosis (RO) were considered suitable in natural surface water treatment. Additionally, electrodialysis (ED) and membrane capacitive deionization (MCDI) were also effective in brackish water desalination. Agriculture required abundant water with relative low quality for irrigation. Therefore, the recovery of water from other stages of the social circulation has become a reasonable solution. Membrane bioreactor (MBR) was a typical technique attributed to low-toxicity effluent. In industrial waste reuse, the osmosis membranes (FO and PRO) were utilized due to the complex physical and chemical properties of industrial wastewater. Especially, membrane distillation (MD) might be promising when the wastewater was preheated. Resources recovery in urban wastewater was mainly divided into recovery of bioenergy (via anaerobic membrane bioreactors, AnMBR), nitrogen (utilizing MD and gas-permeable membrane), and phosphorus (through MBR with chemical precipitation). Furthermore, hybrid/integrated systems with membranes as the core component enhanced their performance and long-term working ability in utilization. Generally, concentrate management and energy consumption control might be the key areas for future advancements of membrane-based technology.

A state-of-art-review on emerging contaminants: Environmental chemistry, health effect, and modern treatment methods

Pollution problems are increasingly becoming e a priority issue from both scientific and technological points of view. The dispersion and frequency of pollutants in the environment are on the rise, leading to the emergence have been increasing, including of a new class of contaminants that not only impact the environment but also pose risks to people's health. Therefore, developing new methods for identifying and quantifying these pollutants classified as emerging contaminants is imperative. These methods enable regulatory actions that effectively minimize their adverse effects to take steps to regulate and reduce their impact. On the other hand, these new contaminants represent a challenge for current technologies to be adapted to control and remove emerging contaminants and involve innovative, eco-friendly, and sustainable remediation technologies. There is a vast amount of information collected in this review on emerging pollutants, comparing the identification and quantification methods, the technologies applied for their control and remediation, and the policies and regulations necessary for their operation and application. In addition, This review will deal with different aspects of emerging contaminants, their origin, nature, detection, and treatment concerning water and wastewater.

Impact of graphene oxide addition on pharmaceuticals removal in anaerobic membrane bioreactor

The addition of conductive materials to the anaerobic digestion bioreactor was suggested to enhance microbial activity. In the present work, an anaerobic membrane bioreactor treating municipal wastewater was operated for 385 days. The impact of different graphene oxide concentrations on the removal target pharmaceuticals and microbial community dynamics was investigated. The addition of graphene oxide did not impact the reactor stability, whereas the removals of antibiotics (e.g., trimethoprim and metronidazole) were enhanced. A shift in the microbial community was detected after the addition of 50-900 mg L^-1 of graphene oxide, with the proliferation hydrogenotrophic methanogens. The proliferation of syntrophic microorganisms may indicate interactions via direct interspecific electron transfer. The obtained results suggest that the addition of graphene oxide at low mg L^-1 concentrations to an anaerobic membrane bioreactor may be considered to improve the removal of antibiotics from municipal wastewater.

Anaerobic membrane bioreactors for pharmaceutical-laden wastewater treatment: A critical review

Pharmaceuticalsare a diverse group of chemical compounds widely used for prevention and treatment of infectious diseases in both humans and animals. Pharmaceuticals, either in their original or metabolite form, find way into the wastewater treatment plants (WWTPs) from different sources. Recently, anaerobic membrane bioreactors (AnMBR) has received significant research attention for the treatment of pharmaceuticals in various wastewater streams. This review critically examines the behaviour and removal of a wide array of pharmaceuticals in AnMBR with primary focus on their removal efficiencies and mechanisms, critical influencing factors, and the microbial community structures. Subsequently, the inhibitory effects of pharmaceuticals on the performance of AnMBR and membrane fouling are critically discussed. Furthermore, the imperative role of membrane biofouling layer and its components in pharmaceuticals removal is highlighted. Finally, recent advancements in AnMBR configurations for membrane fouling control and enhanced pharmaceuticals removal are systemically discussed.

Antibiotics in anaerobic digestion: Investigative studies on digester performance and microbial diversity

The ever-increasing consumption of antibiotics in both humans and animals has increased their load in municipal and pharmaceutical industry waste and may cause serious damage to the environment. Impact of antibiotics on the performance of commercially used anaerobic digesters in terms of bioenergy output, antibiotics' removal and COD removal have been compared critically with a few studies indicating >90% removal of antibiotics. AnMBR performed the best in terms of antibiotic removal, COD removal and methane yield. Most of the antibiotics investigated have adverse effects on microbiome associated with different stages and methane generation pathways of AD which has been assessed using high throughput technologies like metatranscriptomics, metaproteomics and flow cytometry. Perspectives have been given for understanding the fate and elimination of antibiotics from AD. The challenge of optimization and process improvement needs to be addressed to increase efficiency of the anaerobic digesters.

Anaerobic electrochemical membrane bioreactor effectively mitigates antibiotic resistance genes proliferation under high antibiotic selection pressure

The spread of antibiotics and antibiotic resistance genes (ARGs) in environments has posed potential threats to public health. Unfortunately, conventional biological wastewater treatment technologies generally show insufficient removal of antibiotics and ARGs. Bioelectrochemical systems, which can effectively degrade refractory organic pollutants via enhancing microbial metabolisms through electrochemical redox reaction, may provide an alternative for the control of antibiotics and ARGs. Herein, an anaerobic electrochemical membrane bioreactor (AnEMBR) was conducted by combining bioelectrochemical system and anaerobic membrane bioreactor to treat antibiotic-containing wastewater. The AnEMBR at open circuit showed stable CH4 production and high removal of COD and chlortetracycline (CTC) in treating 2.5-15 mg/L CTC. However, increasing CTC to 45 mg/L completely inhibited the methanogenesis of AnEMBR at open circuit. After applying external voltage in AnEMBR, the performances of AnEMBR were significantly improved (e.g., increased CH4 production and CTC removal). Moreover, CTC exposure significantly increased the relative abundances of ARGs in sludge, supernatant, and effluent in AnEMBR at open circuit. Applying voltage greatly attenuated the total relative abundances of ARGs in the supernatant and effluent of AnEMBR compared to those at open circuit. This could be attributed to the enrichment of tetracycline degradation gene tetX, which greatly enhanced the removal of CTC by the AnEMBR and thus reduced the selective pressure of CTC on the microorganisms in supernatant and effluent for ARGs proliferation. These results would provide an effective wastewater treatment technology for treating high-level antibiotic-containing wastewater to mitigate the potential risk of ARGs and antibiotics spread in receiving water body.

Enhanced photodegradation of antibiotics based on anoxygenic photosynthetic bacteria and bacterial metabolites: A sustainably green strategy for the removal of high-risk organics from secondary effluent

Antibiotic residues in effluents discharged from wastewater treatment plants (WWTPs) have been considered high-risk organics due to biorefractory property and potential toxicity. Secondary pollution and unsustainability existed in advanced treatment of secondary effluent are currently in urgent need of improvement. In this study, a sustainably green strategy based on Rhodopseudomonas palustris (R.palustris) by regulating the structure of extracellular polymeric substances (EPS) was proposed for the first time to achieve efficiently removal of sulfadiazine (SDZ). Results showed that 0.2 V was the optimal external potential for R.palustris to efficiently remove SDZ, where the biodegradation rate constant obtained at this potential was 4.87-folds higher than that in open-circuit mode and a complete removal was achieved within 58 h in the presence of EPS extracted at this potential. Three-dimensional excitation-emission matrix (3D-EEM) spectra analysis suggested that tryptophan protein-like, tyrosine protein-like, humic acid-like and fulvic acid-like substances present in EPS were the main effective components which was responsible for the indirect photodegradation of SDZ. The quenching experiments showed that ³EPS* was the dominant reactive species which accounted for 90% of SDZ removal. This study provides new implications for the advanced treatment of secondary effluent organic matters by developing eco-friendly bioaugmentation technology and biomaterials.

Microwave-Assisted Synthesis of N/TiO2 Nanoparticles for Photocatalysis under Different Irradiation Spectra

Nitrogen-doped TiO₂ (N/TiO₂) photocatalyst nanoparticles were derived by the environmentally friendly and cost-effective microwave-assisted synthesis method. The samples were prepared at different reaction parameters (temperature and time) and precursor ratio (amount of nitrogen source; urea). The obtained materials were characterized by X-ray diffraction (XRD), photoelectron spectroscopy (XPS), Raman spectroscopy (RS), infrared spectroscopy (FTIR), diffuse reflectance spectroscopy (DRS), electron microscopy (SEM-EDS), and nitrogen adsorption/desorption isotherms. Two cycles of optimizations were conducted to determine the best reaction temperature and time, as well as N content. The phase composition for all N/TiO₂ nanomaterials was identified as photoactive anatase. The reaction temperature was found to be the most relevant parameter for the course of the structural evolution of the samples. The nitrogen content was the least relevant for the development of the particle morphology, but it was important for photocatalytic performance. The photocatalytic activity of N/TiO₂ nanoparticle aqueous suspensions was evaluated by the degradation of antibiotic ciprofloxacin (CIP) under different irradiation spectra: ultraviolet A light (UVA), simulated solar light, and visible light. As expected, all prepared samples demonstrated efficient CIP degradation. For all irradiation sources, increasing synthesis temperature and increasing nitrogen content further improved the degradation efficiencies.

Mesoporous and adsorption behavior of algal biochar prepared via sequential hydrothermal carbonization and ZnCl2 activation

In this study, biochar derived from brown algal Ascophyllum nodosum was synthesized through hydrothermal carbonization (HTC) coupling with ZnCl₂ chemical activation and applied as a sustainable adsorbent for antibiotic removal from water exemplified by ciprofloxacin (CIP). Various surface analysis techniques such as Brunauer-Emmett-Teller (BET), scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and zeta potential were used to clarify the surface properties of prepared biochars. The adsorption performance of biochars was investigated using batch adsorption experiments with a variety of parameters (initial pH, ionic types, temperature and water matrixes). The application of prepared biochar in CIP removal showed a good result of adsorption capacity (150-400 mg g^-1) in different conditions. Overall, algal biochars, as a product recycled from biowaste, demonstrated a novel and promising adsorbent for effective and sustainable method for removal of antibiotics from water.

Anaerobic Membrane Bioreactors for Municipal Wastewater Treatment: A Literature Review

Currently, there is growing scientific interest in the development of more economic, efficient and environmentally friendly municipal wastewater treatment technologies. Laboratory and pilot-scale surveys have revealed that the anaerobic membrane bioreactor (AnMBR) is a promising alternative for municipal wastewater treatment. Anaerobic membrane bioreactor technology combines the advantages of anaerobic processes and membrane technology. Membranes retain colloidal and suspended solids and provide complete solid–liquid separation. The slow-growing anaerobic microorganisms in the bioreactor degrade the soluble organic matter, producing biogas. The low amount of produced sludge and the production of biogas makes AnMBRs favorable over conventional biological treatment technologies. However, the AnMBR is not yet fully mature and challenging issues remain. This work focuses on fundamental aspects of AnMBRs in the treatment of municipal wastewater. The important parameters for AnMBR operation, such as pH, temperature, alkalinity, volatile fatty acids, organic loading rate, hydraulic retention time and solids retention time, are discussed. Moreover, through a comprehensive literature survey of recent applications from 2009 to 2021, the current state of AnMBR technology is assessed and its limitations are highlighted. Finally, the need for further laboratory, pilot- and full-scale research is addressed.

Antibiotic transformation in an anaerobic membrane bioreactor linked to membrane biofilm microbial activity

Although extensive research to date has focused on enhancing removal rates of antibiotics from municipal wastewaters, the transformation products formed by anaerobic treatment processes remain understudied. The present work aims to examine the possible roles that the different microbial communities of an anaerobic membrane bioreactor (AnMBR) play in the transformation of antibiotics during wastewater treatment. As part of this work, sulfamethoxazole, erythromycin, and ampicillin were added in separate stages to the influent of the AnMBR at incremental concentrations of 10, 50, and 250 μg/L each. Antibiotic-specific transformation products detected during each stage, as identified by high resolution LC-MS, are reported herein. Results suggest that both isoxazole (sulfamethoxazole) and β-lactam (ampicillin) ring opening could be facilitated by the AnMBR's bioprocess. Microbial community analysis results indicated that relative activity of the system's suspended biomass consistently shifted towards syntrophic groups throughout the duration of the experiment. Notable differences were also observed between the suspended biomass and the AnMBR's membrane biofilms. Membrane-attached biofilm communities showed high relative activities of several specific methanogenic (Methanothrix and Methanomethylovorans), syntrophic (Syntrophaceae), and sulfate-reducing (Desulfomonile) groups. Such groups have been previously identified as involved in the formation of the antibiotic degradation products observed in the effluent of the AnMBR. The activity of these communities within the biofilms likely confers certain advantages that aid in the biotransformation of the antibiotics tested.

Complete Degradation and Detoxification of Ciprofloxacin by a Micro-/Nanostructured Biogenic Mn Oxide Composite from a Highly Active Mn2+-Oxidizing Pseudomonas Strain

Ciprofloxacin (CIP), as a representative broad-spectrum antibiotic, poses a major threat to human health and the ecological environment as a result of its abuse and emissions. In this study, a highly active Mn²⁺-oxidizing bacterium, Pseudomonas sp. CCTCC M2014168, was induced to form micro-/nanostructured biogenic Mn oxide (BMO) aggregates through continuous culturing with 1 mmoL^-1 Mn²⁺. Following the characterization of Mn⁴⁺ oxides and the micro-/nanostructures by scanning electron microscopy, high-resolution transmission electron microscopy and X-ray diffraction assays, the BMO composites were subjected to CIP degradation and detoxification in laboratory trials. High-performance liquid chromatograph (HPLC) analysis identified that the BMO composites were capable of completely degrading CIP, and HPLC with a mass spectrometer (LC/MS) assays identified three intermediates in the degradation pathway. The reaction temperature, pH and initial ciprofloxacin concentration substantially affected the degradation efficiency of CIP to a certain extent, and the metal ions Mg²⁺, Cu²⁺, Ni²⁺ and Co²⁺ exerted significant inhibitory effects on CIP degradation. A toxicity test of the degradation products showed that CIP was completely detoxified by degradation. Moreover, the prepared BMO composite exhibited a high capacity for repeated degradation and good performance in continuous degradation cycles, as well as a high capacity to degrade CIP in real natural water.

Comparative overview of advanced oxidation processes and biological approaches for the removal pharmaceuticals

Nowadays, pharmaceuticals are the center of significant environmental research due to their complex and highly stable bioactivity, increasing concentration in the water streams and high persistence in aquatic environments. Conventional wastewater treatment techniques are generally inadequate to remove these pollutants. Aiming to tackle this issue effectively, various methods have been developed and investigated on the light of chemical, physical and biological procedures. Increasing attention has recently been paid to the advanced oxidation processes (AOPs) as efficient methods for the complete mineralization of pharmaceuticals. Their high operating costs compared to other processes, however, remain a challenge. Hence, this review summarizes the current and state of art related to AOPs, biological treatment and their effective exploitation for the degradation of various pharmaceuticals and other emerging molecules present in wastewater. The review covers the last decade with a particular focus on the previous five years. It is further envisioned that this review of advanced oxidation methods and biological treatments, discussed herein, will help readers to better understand the mechanisms and limitations of these methods for the removal of pharmaceuticals from the environment. In addition, we compared AOPs and biological treatments for the disposal of pharmaceuticals from the point of view of cost, effectiveness, and popularity of their use. The exploitation of coupling AOPs and biological procedures for the degradation of pharmaceuticals in wastewater was also presented. It is worthy of note that an integrated AOPs/biological system is essential to reach the complete degradation of pharmaceuticals; other advantages of this hybrid technique involve low energy cost, an efficient degradation process and generation of non-toxic by-products.

Fate of emerging and priority micropollutants during the sewage sludge treatment - Part 2: Mass balances of organic contaminants on sludge treatments are challenging

This paper analyzes the fate of 71 priority and emerging organic contaminants all along the treatment trains of sewage sludge treatment facilities in Paris including dewatering by centrifugation, thermal drying and anaerobic digestion. It aimed at proposing and applying a mass balances calculation methodology to each process and pollutant. This data validation strategy demonstrated the complexity to perform representative inlet/outlet sampling and analysis campaigns at industrial scales regarding organic compounds and to propose options to overcome this issue. Centrifugation and drying processes only implied physical mechanisms as phase separation and water elimination. Hence, correct mass balance were expected observed for organic contaminants if sampling and analysis campaigns were representative. This was the case for hydrophobic and neutral compounds. For the other more hydrophilic and charged compounds, the mass balances were scarcely correct. Thus, the conventional sampling and analytical practices used with sludge should be questioned and adapted to better take into account the high heterogeneity of sludge and the evolution of matrix effect within sludge treatment processes on micropollutant determination. For the biological anaerobic digestion process where degradations can occur and removals can be observed, the mass balances were deeply interpreted for 60 contaminants. This process contributed to the elimination above 70% of 21 detected compounds including 16 pharmaceuticals, 2 phthalates, 2 hormones and 1 perfluorinated compound. Removals of domperidone, propranolol, escitalopram, lidocaine, verapamil and cefoperazone under this condition were reported for the first time.

Degradation of organic pollutants by intimately coupling photocatalytic materials with microbes: a review

With the rapid development of industry and agriculture, large amounts of organic pollutants have been released into the environment. Consequently, the degradation of refractory organic pollutants has become one of the toughest challenges in remediation. To solve this problem, intimate coupling of photocatalysis and biodegradation (ICPB) technology, which allows the simultaneous action of photocatalysis and biodegradation and thus integrates the advantages of photocatalytic reactions and biological treatments, was developed recently. ICPB consists mainly of porous carriers, photocatalysts, biofilms, and an illuminated reactor. Under illumination, photocatalysts on the surface of the carriers convert refractory pollutants into biodegradable products through photocatalytic reactions, after which these products are completely degraded by the biofilms cultivated in the carriers. Additionally, the biofilms are protected by the carriers from the harmful light and free radicals generated by the photocatalyst. Compared with traditional technologies, ICPB remarkably improves the degradation efficiency and reduces the cost of bioremediation. In this review, we introduce the origin and mechanisms of ICPB, discuss the development of reactors, carriers, photocatalysts, and biofilms used in ICPB, and summarize the applications of ICPB to treat organic pollutants. Finally, gaps in this research as well as future perspectives are discussed.

Membrane processes

This literature review provides a review for publications in 2018 and 2019 and includes information membrane processes findings for municipal and industrial applications. This review is a subsection of the annual Water Environment Federation literature review for Treatment Systems section. The following topics are covered in this literature review: industrial wastewater and membrane. Bioreactor (MBR) configuration, membrane fouling, design, reuse, nutrient removal, operation, anaerobic membrane systems, microconstituents removal, membrane technology advances, and modeling. Other sub-sections of the Treatment Systems section that might relate to this literature review include the following: Biological Fixed-Film Systems, Activated Sludge, and Other Aerobic Suspended Culture Processes, Anaerobic Processes, and Water Reclamation and Reuse. This publication might also have related information on membrane processes: Industrial Wastes, Hazardous Wastes, and Fate and Effects of Pollutants.

Anaerobic membrane bioreactors for treatment of emerging contaminants: A review

Emerging contaminants (ECs) are synthetic organic chemicals that released into the environment, which pose a serious threat to the ecosystem and human health. Due to the high costs of physicochemical methods and the possibility of secondary pollution, and conventional biological treatment techniques are not efficient to remove ECs. Thus, there is a need to develop novel technologies to treat ECs. Anaerobic digestion (AD) is reported to degrade most ECs. Anaerobic membrane bioreactor (AnMBR) is an upgraded AD technology that has high system stability and microbial community abundance. The biogas production and EC biodegradation efficiency in the AnMBR system are markedly higher than those in the traditional AD system. In recent years, AnMBR is widely used to remove environmental ECs. This review analyzes the feasibility and challenges of AnMBR in the treatment of ECs and provides useful insights for improving the performance and efficiency of AnMBR to treat ECs.

Efficient electrochemical generation of ferrate(VI) by iron coil anode imposed with square alternating current and treatment of antibiotics

Anode passivation is still a main challenge for the electrochemical generation of ferrate(VI, Fe(VI)), leading to the reduction of Fe(VI) production efficiency. In this study, cyclic voltammetry, scanning electronic microscopy, and electrochemical impedance spectroscopy were used to select better anode electrode configurations (iron wire, iron gauze, and iron coil). The results indicate that iron coil had the least degree of passivation. Different imposed current waveforms during the electrochemical generation of Fe(VI) were also investigated, and the iron coil imposed with square alternating current (AC) wave can mitigate the anode passivation, resulting in higher Fe(VI) production efficiency. The optimum conditions for the electrochemical generation of Fe(VI) were evaluated and the optimum temperature (40 ℃), current density (10 mA/cm²), AC cycle period (15 s) and electrolyte concentrations (14 M NaOH) were identified. As a result, 0.12 mol/L Fe(VI) concentration and over 50% of current efficiency can be achieved after 3 h electrolysis. The generated Fe(VI) solution was further applied to oxidize doxycycline(DOX) and sulfadiazine(SDZ) as typical antibiotics. Over 80% of DOX can be removed at a Fe(VI) to DOX molar ratio of 5:1 (pH = 4-9), whilst a higher Fe(VI) to SDZ molar ratio of 20:1 (pH = 7) was needed to obtain 75% SDZ removal.

Prepartion and application of novel blast furnace dust based catalytic-ceramic-filler in electrolysis assisted catalytic micro-electrolysis system for ciprofloxacin wastewater treatment

Blast furnace dust (BFD), a hazardous metallurgical waste, is generated during the iron-making process and consists plenty of Fe and C. This study is among the first to apply BFD in catalytic-ceramic-filler (CCF) preparation and degradation of ciprofloxacin (CIP). The novel BFD based Fe-Ni CCF obviously enhanced the removal of CIP (from around 42%-72% after 3 h) in comparation with troditional Fe-C ceramic-filler(CF). The Fe-Ni CCF was further applied in a coupled system of electrolysis assisted catalytic micro-electrolysis (E-CME) process for CIP wastewater treatment. Under optimal operating conditions (iron rod as anode, voltage of 10v and HRT of 3 h), nearly 97% of CIP, 90% of total organic carbon (TOC) and 99% of total phosphorus (TP) were removed by E-CME process in near-neutral solution. The degradation mechanism analysis by LC-MS revealed that polyhydroxy sub-stituted, piperazine rings cleavage and so on were the main reaction of CIP in E-CME process. Additionally, the chemical oxygen demand (COD) residue after E-CME process could be effectively eliminated by up-flow anaerobic filter (UAF), owing to the significant improvement of wastewater biodegradability by E-CME pretreatment. This study provides a new way for co-friend recycling of BFD and a highly-efficient, cost-sffective technology for CIP wastewater treatment.