Microplastics contamination in water supply system and treatment processes

Due to global demand, millions of tons of plastics have been widely consumed, resulting in the widespread entry of vast amounts of microplastic particles into the environment. The presence of microplastics (MPs) in water supplies, including bottled water, has undergone systematic review, assessing the potential impacts of MPs on humans through exposure assessment. The main challenges associated with current technologies lie in their ability to effectively treat and completely remove MPs from drinking and supply water. While the risks posed by MPs upon entering the human body have not yet been fully revealed, there is a predicted certainty of negative impacts. This review encompasses a range of current technologies, spanning from basic to advanced treatments and varying in scale. However, given the frequent detection of MPs in drinking and bottled water, it becomes imperative to implement comprehensive management strategies to address this issue effectively. Consequently, integrating current technologies with management options such as life-cycle assessment, circular economy principles, and machine learning is crucial to eliminating this pervasive problem.

Kumquat peel-derived biochar to support zeolitic imidazole framework-67 (ZIF-67) for enhancing peracetic acid activation to remove acetaminophen from aqueous solution

This study presents the synthesis of a novel composite catalyst, ZIF-67, doped on sodium bicarbonate-modified biochar derived from kumquat peels (ZIF-67@KSB3), for the enhanced activation of peracetic acid (PAA) in the degradation of acetaminophen (APAP) in aqueous solutions. The composite demonstrated a high degradation efficiency, achieving 94.3% elimination of APAP at an optimal condition of 200 mg L-1 catalyst dosage and 0.4 mM PAA concentration at pH 7. The degradation mechanism was elucidated, revealing that superoxide anion (O2•-) played a dominant role, while singlet oxygen (1O2) and alkoxyl radicals (R-O•) also contributed significantly. The degradation pathways of APAP were proposed based on LC-MS analyses and molecular electrostatic potential calculations, identifying three primary routes of transformation. Stability tests confirmed that the ZIF-67@KSB3 catalyst retained an 86% efficiency in APAP removal after five successive cycles, underscoring its durability and potential for application in pharmaceutical wastewater treatment.

KHCO3-activated high surface area biochar derived from brown algae: A case study for efficient adsorption of Cr(VI) in aqueous solution

The current study aimed to assess the effectiveness of biochar formed from algae in the removal of Cr(VI) through the process of impregnating brown algae Sargassum hemiphyllum with KHCO3. The synthesis of KHCO3-activated biochar (KBAB-3), demonstrating remarkable adsorption capabilities for Cr(VI), was accomplished utilizing a mixture of brown algae and KHCO3 in a mass ratio of 1:3, followed by calcination at a temperature of 700 °C. Based on the empirical evidence, it can be observed that KBAB-3 shown a significant ability to adsorb Cr(VI) within a range of 60-160 mg g-1 across different environmental conditions. In addition, the KBAB-3 material demonstrated the advantageous characteristic of easy separation, allowing for the continued maintenance of a high efficiency in removing Cr(VI) even after undergoing numerous cycles of reuse. In conclusion, the application of KBAB-3, a novel adsorbent, exhibits considerable prospects for effective removal of Cr(VI) from diverse water sources in the near future.

Mechanisms of biased agonism by Gαi/o-biased stapled peptide agonists of the relaxin-3 receptor

The neuropeptide relaxin-3 is composed of an A chain and a B chain held together by disulfide bonds, and it modulates functions such as anxiety and food intake by binding to and activating its cognate receptor RXFP3, mainly through the B chain. Biased ligands of RXFP3 would help to determine the molecular mechanisms underlying the activation of G proteins and β-arrestins downstream of RXFP3 that lead to such diverse functions. We showed that the i, i+4 stapled relaxin-3 B chains, 14s18 and d(1-7)14s18, were Gαi/o-biased agonists of RXFP3. These peptides did not induce recruitment of β-arrestin1/2 to RXFP3 by GPCR kinases (GRKs), in contrast to relaxin-3, which enabled the GRK2/3-mediated recruitment of β-arrestin1/2 to RXFP3. Relaxin-3 and the previously reported peptide 4 (an i, i+4 stapled relaxin-3 B chain) did not exhibit biased signaling. The staple linker of peptide 4 and parts of both the A chain and B chain of relaxin-3 interacted with extracellular loop 3 (ECL3) of RXFP3, moving it away from the binding pocket, suggesting that unbiased ligands promote a more open conformation of RXFP3. These findings highlight roles for the A chain and the N-terminal residues of the B chain of relaxin-3 in inducing conformational changes in RXFP3, which will help in designing selective biased ligands with improved therapeutic efficacy.

Influence of salinity on microalgae-bacteria symbiosis treating shrimp farming wastewater

Shrimp farming has strongly developed in recent years, and became an important economic sector that helps create jobs and increase incomes for Vietnamese. However, the aquatic environment has also been greatly affected by the development due to the amount of wastewater discharged from shrimp farms. Among biological processes used for treating shrimp farming wastewater, the application of microalgae-bacteria co-culture is considered high potential due to its treatment and energy saving. Consequently, a photobioreactor operated with microalgae-bacteria co-culture was employed to treat shrimp farming wastewater. The salinity of wastewater and the operating condition (ratio of biomass retention time and hydraulic retention time, BRT/HRT) are the major factors affecting pollutant removal. Thus, this study investigated the effects of salinities of 0.5-20 ppt and BRT/HRT ratios of 1.5-16 on the removal performance. The results indicated that the nutrient removal was reduced when PBR operated under salinity over than 10 ppt and BRT/HRT over 5.5. Particularly, the nitrogen and phosphorus removal rates were achieved 6.56 ± 1.33 gN m-3 d-1 and 1.49 ± 0.59 gP m-3 d-1, and the removal rates decreased by 2-4 times under a salinity >10 ppt and 2-6 times under a BRT/HRT ratio >5.5. Whereas, organic matter treatment seems not to be affected when the removal rate was maintained at 28-34 gCOD m-3 d-1 under various conditions.

Enhanced photocatalytic activity of tin oxide-doped molybdenum disulfide nanohybrids under visible light irradiation: Antibiotics elimination, heavy metal reduction and antibacterial behavior

Nano-heterojunction photocatalytic can operate removal of pollutants, which is basic for the sustainable development of a clean environment. Herein, we propose a novel MoS2/SnO2 (MS) S-scheme heterojunction by a facile hydrothermal process, which is cheap, easily available, highly visible-light response, and good stability. The MS nano-heterojunction suggested superior performance with the photocatalytic degradation of 97.6% within 100 min for ciprofloxacin (CIP) removal, which was 5.74 and 4.88 folds higher than that of pristine MoS2 and SnO2, respectively. The fabricated MS photocatalysts displayed outstanding photocatalytic efficiency toward Cr (VI) reduction. The removal capability of Cr (VI) reached up to 92.5% within 60 min. The photodegradation efficiency was 5.2 folds that of pristine MoS2. In addition, the antibacterial performance approximately approached 100% for E. coli within 10 min, which was more apparent than the others. A series of excellent results implied that MS nano-heterojunction had a high ultraviolet and visible light absorbance, larger specific surface area, outstanding electron-hole pairs migration and higher capability of photo-response electrons and holes separation rate. This system offers a novel window into the evolution of nano-heterojunction for wastewater treatment and solar energy harvesting applications.

Biochar for soil remediation: A comprehensive review of current research on pollutant removal

Biochar usage in soil remediation has turned out to be an enticing topic recently. Biochar, a product formed by pyrolysis of organic waste, which is rich in carbon, has the aptitude to ameliorate climate change by sequestering carbon while also enhancing soil quality and crop yields. Two-edged implications of biochar on soil amendment are still being discussed yet, clarity on the long-term implications of biochar on soil health and the environment is not yet achieved. As a result, it is crucial to systematically uncover the pertinent information regarding biochar remediation, as this can serve as a roadmap for future research on using biochar to remediate contaminated soils in mining regions. This review endeavors to bring forth run thoroughly the latest state of research on the use of biochar in soil remediation, along with its potential benefits, limitations, challenges, and future scope. By synthesizing existing literature on biochar soil remediation, this review aims to provide insights into the potential of biochar as a sustainable solution for soil remediation. Specifically, this review will highlight the key factors that influence the effectiveness of biochar for soil remediation and the potential risks associated with its use, as well as the current gaps in knowledge and future research directions.

Seroprevalence of Toxocara at Tra Vinh University Hospital in Vietnam

OBJECTIVE

The study aims to assess the seroprevalence of Toxocariasis and its associated risk factors among individuals attending the outpatient department at Tra Vinh University Hospital, Vietnam, in 2022.

SUBJECTS AND METHODS

A cross-sectional survey was conducted among outpatients of Tra Vinh University Hospital. Toxocariasis diagnosis was based on the Enzyme-Linked Immunosorbent Assay (ELISA) performed at the hospital's laboratory department. We assessed the seroprevalence of Toxocariasis and evaluated associated risk factors, including demographics and certain behaviors.

RESULTS

Of the 249 participants surveyed, 165 tested positive for Toxocariasis, yielding a seroprevalence of 66.3% (95% CI: 60.4-72.1). Multivariate analysis revealed that age groups up to 30 and 30-60 years had higher odds of Toxocariasis infection, with adjusted odds ratios (aOR) of 2.52 (95% CI: 1.04-6.11) and 3.21 (95% CI: 1.44-7.15) respectively. Additionally, individuals residing in rural areas and those in contact with dogs or cats had increased risks, with aORs of 2.21 (95% CI: 1.21-4.01) and 2.04 (95% CI: 1.10-3.79), respectively. Notably, hand washing before eating emerged as a protective factor against Toxocariasis, presenting an aOR of 0.38 (95% CI: 0.19-0.76).

CONCLUSIONS

Our findings underscore a significant seroprevalence (66.3%) of Toxocara spp. among outpatients at Tra Vinh University Hospital. Proactive measures, including hand hygiene before meals and after pet interactions, are advocated. There is a pronounced need for community-level epidemiological surveillance for human Toxocariasis.

A novel tungsten diselenide nanoparticles for enhanced photocatalytic performance of Cr (VI) reduction and ciprofloxacin (CIP)

Nanoparticles (NPs) fabrication is a significant approach to enhance the visible light response of photocatalysts, to realize inexpensive and more harmful compound removal, at larger scale. The poor electrons and holes separation capability and low light activity of bulk materials can be notably enhanced through developing NPs. From photocatalytic investigation, better performance was received in the tungsten diselenide (WSe2) NPs than that in bare WSe2, exhibiting the action of restrained recombination of charge carriers in the NPs. The photocatalytic Cr(VI) reduction efficiency of WSe2 NPs is 2.7 folds greater than that by bare WSe2. On the other hand, the photocatalytic efficiency follows the order of nano WSe2-3 > nano WSe2-2 > nano WSe2-1 > bare WSe2, nano WSe2-3 is nearly 2.7 folds greater than that of bare WSe2. The results imply the fabrication of WSe2 NPs and it possesses improved visible light utilization. The proposed WSe2 NPs have merged with the three aspects of photocatalytic capability including the visible light activity, the valid separation of photo-response charge carriers and enough surface active sites owing to the nanoscale formed. This research endows conduct on the potential style of NPs for photo-response water environmental remediation.

Tuberculin skin testing and QuantiFERON™-TB Gold Plus positivity among household contacts in Vietnam

SETTING

TB infection (TBI) is diagnosed using the technique-dependent tuberculin skin test (TST) or costly, more accurate interferon-gamma release assays. The TST (⩾10 mm) threshold was indicated by previous research among household contacts in Vietnam, but routine implementation with a different tuberculin reagent showed unexpectedly low TST positivity.

OBJECTIVE

TST (⩾5 mm and ⩾10 mm) results were compared to QuantiFERON™-TB Gold Plus (QFT) results in household contacts during community campaigns in 2020 and 2021.

DESIGN

This was a cross-sectional multi-center implementation study.

RESULTS

Among 1,330 household contacts in 2020, we found a TBI prevalence of 38.6% (QFT), similar to TST ⩾5 mm (37.4%) and higher than TST ⩾10 mm (13.1%). QFT+/TST+ was higher for TST ⩾5 mm (20.7%) than TST ⩾10 mm (9.4%). QFT was not discordant with TST ⩾5 mm (McNemar's test = 0.6, P = 0.5) but was discordant with TST ⩾10 mm (McNemar's test = 263.9, P < 0.01). Older age and Southern region increased odds for positive TST ⩾5 mm and QFT with weaker associations for TST ⩾10 mm. Agreement and discordance were similar in 2021 for 1,158 household contacts.

CONCLUSION

Tuberculin reagents affect TST positivity rates. High TB burden countries should monitor reliability of TBI diagnosis, including tuberculin potency, cold chain, and TST technique to optimize eligibility for TB preventive treatment.

NiCo2O4-loaded sunflower husk-derived biochar as efficient peroxymonosulfate activator for tetracycline removal in water

In this study, biochar produced from sunflower seeds husk was activated through ZnCl₂ to support the NiCo₂O₄ nanoparticles (NiCo₂O₄@ZSF) in catalytic activation of peroxymonosulfate (PMS) toward tetracycline (TC) removal from aqueous solution. The good dispersion of NiCo₂O₄ NPs on the ZSF surface provided sufficient active sites and abundant functional groups for the adsorption and catalytic reaction. The NiCo₂O₄@ZSF activating PMS showed high removal efficiency up to 99% after 30 min under optimal condition ([NiCo₂O₄@ZSF] = 25 mg L^-1, [PMS] = 0.04 mM, [TC] = 0.02 mM and pH = 7). The catalyst also exhibited good adsorption performance with a maximum adsorption capacity of 322.58 mg g^-1. Sulfate radicals (SO₄^•-), superoxide radical (O₂•-), and singlet oxygen (¹O₂) played a decisive role in the NiCo₂O₄@ZSF/PMS system. In conclusion, our research elucidated the production of highly efficient carbon-based catalysts for environmental remediation, and also emphasized the potential application of NiCo₂O₄ doped biochar.

Roles of microalgae-based biofertilizer in sustainability of green agriculture and food-water-energy security nexus

For years, agrochemical fertilizers have been used in agriculture for crop production. However, intensive utilization of chemical fertilizers is not an ecological and environmental choice since they are destroying soil health and causing an emerging threat to agricultural production on a global scale. Under the circumstances of the increasing utilization of chemical fertilizers, cultivating microalgae to produce biofertilizers would be a wise solution since desired environmental targets will be obtained including (1) replacing chemical fertilizer while improving crop yields and soil health; (2) reducing the harvest of non-renewable elements from limited natural resources for chemical fertilizers production, and (3) mitigating negative influences of climate change through CO₂ capture through microalgae cultivation. Recent improvements in microalgae-derived-biofertilizer-applied agriculture will be summarized in this review article. At last, the recent challenges of applying biofertilizers will be discussed as well as the perspective regarding the concept of circular bio-economy and sustainable development goals (SDGs).

Hydrothermal and pyrolytic conversion of sunflower seed husk into novel porous biochar for efficient adsorption of tetracycline

In this study, sunflower seed husk biochar prepared by ZnCl₂-activated and hydrothermal carbonization (HZSF) was studied for its effectiveness in removing tetracycline (TC) from an aqueous solution. The physical and chemical properties of materials were characterized by different methods of surface analysis. The specific surface area of HZSF is significantly enhanced over 1200 times compared with non-modified biochar (HZSF: 1578.3 m²·g^-1, SF-700: 1.3 m²·g^-1), which has an enhancement effect on the TC adsorption capacity. The HZSF showed that the Langmuir isotherm and pseudo-second-order kinetic models could properly characterize the adsorption processes. In the Langmuir isotherm model, HZSF exhibited effective adsorption performance with q_max of 673.0 mg·g^-1 at 298 K for 24 h. The possible mechanisms for the adsorption process were the monolayer, chemical adsorption, and the participation of strong intermolecular forces. In general, HZSF has the potential to be a useful adsorbent for the elimination of antibiotics from water-based solutions.

Phosphoric acid-activated biochar derived from sunflower seed husk: Selective antibiotic adsorption behavior and mechanism

In recent years, the unnecessary overuse of antibiotics has increased globally, resulting in antibiotic contamination of water, which has become a significant environmental concern. This study aims to examine the adsorption behavior of antibiotics (Tetracycline TC, Ciprofloxacin CIP, Ibuprofen IBP, and Sulfamethoxazole SMX) onto H₃PO₄-activated sunflower seed husk biochar (PSF). The results demonstrated that H₃PO₄ could enhance the specific surface area (378.8 m²/g) and create a mesoporous structure of biochar. The adsorption mechanism was investigated using kinetic models, isotherms, and thermodynamics. The maximum adsorption capacities (q_max) of TC, CIP, SMX, and IBP are 429.3, 361.6, 251.3, and 251.1 mg g^-1, respectively. The adsorption mechanism of antibiotics on PSF was governed by complex mechanisms, including chemisorption, external diffusion, and intraparticle diffusion. This research provides an environmentally friendly method for utilizing one of the agricultural wastes for the removal of a variety of antibiotics from the aquatic environment.

Removal of heavy metals from aqueous solutions by high performance capacitive deionization process using biochar derived from Sargassum hemiphyllum

Capacitive deionization (CDI) has been considered as an efficient, energy-saving and environmental friendly technology for water treatment. For the practical application of CDI, high-performance electrode materials beyond standard activated carbon should be developed. In this study, biochar derived from brown algae Sargassum hemiphyllum prepared by pyrolysis at 300-700 °C and then used as the CDI electrode to remove Cu(II) from aqueous solutions. According to the findings, the optimal pyrolysis temperature was 700 °C, and the electrosorption capacity of BAB700 was 75-120 mg·g-1 at an applied voltage of 1.2 V across wide range of initial pH, temperatures and ion types. Moreover, BAB700 also exhibited outstanding ability to electrosorb other heavy metals (Zn(II), Ni(II), and Cd(II)). In addition, the BAB700 retained the Cu(II) removal efficiency of 70 % in 10 cycles. Cu(II) in actual water is completely eliminated with great reproducibility, resulting in a high degree of applicability for water treatment.

Diagnostic Accuracy of Arterial Spin-Labeling, Dynamic Contrast-Enhanced, and DSC Perfusion Imaging in the Diagnosis of Recurrent High-Grade Gliomas: A Prospective Study

BACKGROUND AND PURPOSE

For patients with high-grade gliomas, the appearance of a new, enhancing lesion after surgery and chemoradiation represents a diagnostic dilemma. We hypothesized that MR perfusion without and with contrast can differentiate tumor recurrence from radiation necrosis.

MATERIALS AND METHODS

In this prospective study, we performed 3 MR perfusion methods: arterial spin-labeling, DSC, and dynamic contrast enhancement. For each lesion, we measured CBF from arterial spin-labeling, uncorrected relative CBV, and leakage-corrected relative CBV from DSC imaging. The volume transfer constant and plasma volume were obtained from dynamic contrast-enhanced imaging without and with T1 mapping using modified Look-Locker inversion recovery (MOLLI). The diagnosis of tumor recurrence or radiation necrosis was determined by either histopathology for patients who underwent re-resection or radiologic follow-up for patients who did not have re-resection.

RESULTS

There were 26 patients with 32 lesions, 19 lesions with tumor recurrence and 13 lesions with radiation necrosis. Compared with radiation necrosis, lesions with tumor recurrence had higher CBF (P = .033), leakage-corrected relative CBV (P = .048), and plasma volume using MOLLI T1 mapping (P = .012). For differentiating tumor recurrence from radiation necrosis, the areas under the curve were 0.81 for CBF, 0.80 for plasma volume using MOLLI T1 mapping, and 0.71 for leakage-corrected relative CBV. A correlation was found between CBF and leakage-corrected relative CBV (r s = 0.54), volume transfer constant, and plasma volume (0.50 < r s< 0.77) but not with uncorrected relative CBV (r s = 0.20, P = .29).

CONCLUSIONS

In the differentiation of tumor recurrence from radiation necrosis in a newly enhancing lesion, the diagnostic value of arterial spin-labeling-derived CBF is similar to that of DSC and dynamic contrast-enhancement-derived blood volume.

A bias of Asparagine to Lysine mutations in SARS-CoV-2 outside the receptor binding domain affects protein flexibility

Introduction

COVID-19 pandemic has been threatening public health and economic development worldwide for over two years. Compared with the original SARS-CoV-2 strain reported in 2019, the Omicron variant (B.1.1.529.1) is more transmissible. This variant has 34 mutations in its Spike protein, 15 of which are present in the Receptor Binding Domain (RBD), facilitating viral internalization via binding to the angiotensin-converting enzyme 2 (ACE2) receptor on endothelial cells as well as promoting increased immune evasion capacity.

Methods

Herein we compared SARS-CoV-2 proteins (including ORF3a, ORF7, ORF8, Nucleoprotein (N), membrane protein (M) and Spike (S) proteins) from multiple ancestral strains. We included the currently designated original Variant of Concern (VOC) Omicron, its subsequent emerged variants BA.1, BA2, BA3, BA.4, BA.5, the two currently emerging variants BQ.1 and BBX.1, and compared these with the previously circulating VOCs Alpha, Beta, Gamma, and Delta, to better understand the nature and potential impact of Omicron specific mutations.

Results

Only in Omicron and its subvariants, a bias toward an Asparagine to Lysine (N to K) mutation was evident within the Spike protein, including regions outside the RBD domain, while none of the regions outside the Spike protein domain were characterized by this mutational bias. Computational structural analysis revealed that three of these specific mutations located in the central core region, contribute to a preference for the alteration of conformations of the Spike protein. Several mutations in the RBD which have circulated across most Omicron subvariants were also analysed, and these showed more potential for immune escape.

Conclusion

This study emphasizes the importance of understanding how specific N to K mutations outside of the RBD region affect SARS-CoV-2 conformational changes and the need for neutralizing antibodies for Omicron to target a subset of conformationally dependent B cell epitopes.

Nano magnetite assisted flocculation for efficient harvesting of lutein and lipid producing microalgae biomass

For commercial scale algal biorefining, harvesting cost is a major bottleneck. Thus, a cost-effective, less-energy intensive, and efficient harvesting method is being investigated. Among several harvesting methods, magnetic flocculation offers the benefits of modest operation, energy savings and quick separation. This study aims to develop novel magnetite-(Fe₃O₄) nanoparticles (MNPs) of 20 nm average size and their high reusability potential to reduce the harvesting cost of microalgae biomass. The MNPs were synthesized and characterized using FTIR, Zeta analyzer, and SEM before performing on Chlorella sorokiniana Kh12 and Tu5. For maximum harvesting efficiency >99%, the optimal culture pH, MNPs concentration, and agitation speed were 3, 200 mg/L, and 450 rpm, respectively. Subsequently, MNPs were recovered via alkaline treatment and reused up to 5 cycles as they retained their reactivity and harvesting efficiency. The studied MNPs-based harvesting method could be adopted at a commercial scale for cost-effective algae biorefinery in the future.

An overview of deploying membrane bioreactors in saline wastewater treatment from perspectives of microbial and treatment performance

The discharged saline wastewater has severely influenced the aquatic environment as the treatment performance of many wastewater treatment techniques is limited. In addition, the sources of saline wastewater are also plentiful from agricultural and various industrial fields such as food processing, tannery, pharmaceutical, etc. Although high salinity levels negatively impact the performance of both physicochemical and biological processes, membrane bioreactor (MBR) processes are considered as a potential technology to treat saline wastewater under different salinity levels depending on the adaption of the microbial community. Therefore, this study aims to systematically review the application of MBR widely used in the saline wastewater treatment from the perspectives of microbial structure and treatment efficiencies. At last, the concept of carbon dioxide capture and storage will be proposed for the MBR-treating saline wastewater technologies and considered toward the circular economy with the target of zero emission.

Magnetic biochar derived from macroalgal Sargassum hemiphyllum for highly efficient adsorption of Cu(II): Influencing factors and reusability

In this study, the brown algae Sargassum Hemiphyllum was used as a carbon source for synthesis of magnetic porous biochar via pyrolyzing at high temperature and and doping iron oxide particles (Fe-BAB). Cu (II) species were removed from aqueous solutions using Fe-BAB under various conditions. Fe-BAB demonstrated superior Cu (II) adsorption (105.3 mg g-1) compared to other biochars. On the surface of Fe-BAB, there are several oxygen-containing functional groups, such as -COOH and -OH, which are likely responsible for the excellent heavy metal removal performance. By utilizing magnet, the Fe-BAB can be conveniently separated from the solution and ready for further usage. Multi-adsorption mechanisms were responsible for Cu adsorption on Fe-BAB. Using the magnetic algal biochar for heavy metal removal is feasible due to its high adsorption efficiency and simplicity of separation.

Adsorption of lead(II) onto PE microplastics as a function of particle size: Influencing factors and adsorption mechanism

The adsorption of Pb ions, on high-density polyethylene (PE) microplastics (MPs) with the diameter of 48-500 μm, was examined in this study. According to the Langmuir isotherm, MP of the smallest size, 48 μm, had the greatest adsorption capacity of 0.38 μmol g^-1. The mechanism of Pb ions adsorption onto PE MPs was chemical adsorption, in particular, hydrogen bonding and surface complexation. Pb adsorption onto PE particles was proceeded at a rapid rate, as predicted by the pseudo-second-order rate model (R² > 0.99). The PE 48 μm had the maximum adsorption capacity of 0.44 μmol g-1 (or 0.2 mol m^-2) at pH 5. While humic acid can operate as a bridging agent, boosting heavy metal adsorption on the surface of PE MPs, fulvic acid has the reverse effect. The findings indicated that PE particles may serve as a carrier of heavy metals in the aquatic environment, posing perceived risks to the environment and public health.

Pyrolysis of marine algae for biochar production for adsorption of Ciprofloxacin from aqueous solutions

Biochars derived from three species of algae was synthesized by impregnating the green algae Ulva Ohnoi, red algae Agardhiella subulata, and brown algae Sargassum hemiphyllum with ZnCl₂ chemical activator and employed as a long-term adsorbent for ciprofloxacin (CIP) removal from water. The results revealed that combination of brown algae and ZnCl₂ chemical activator (ZBAB) successfully produced mesoporous biochar with excellent physicochemical characteristics and gave the best CIP adsorption capacity. The ZBAB yielded a high CIP adsorption capacity (190-300 mg g^-1) under various parameter effects (initial pH, temperature and major ions). Throughought the surface characterization techniques, the proposed adsorption mechanisms were electrostatic interaction, π-π EDA interaction, pore filling and hydrogen bonding. Moreover, not only algal biochars exhibited innovative and potential adsorbent for rapid and effective remediate pollution from water, but combination of algal biomass and ZnCl₂ activator also created renewable source of energy from biomass pyrolysis.

Photoreduction of CO2 to CH4 over Efficient Z-Scheme γ-Fe2O3/g-C3N4 Composites

A series of composite γ-Fe₂O₃/g-C₃N₄ (denoted as xFeCN with x equal 5, 10, 15, and 20 of γ-Fe₂O₃ percentage in weight) was prepared by calcination and precipitation-impregnation methods. X-ray diffraction (XRD), Fourier transform infrared (FTIR), and X-ray photoelectron spectrometry (XPS) characterizations indicated the successful synthesis of Z-scheme FeCN composites. A red shift of the light absorption region was revealed by UV-vis diffuse reflectance spectroscopy (UV-DRS). In addition, photoluminescence spectroscopy (PL) spectra showed an interface interaction of two phases Fe₂O₃ and g-C₃N₄ in the synthesized composites that improved the charge transfer capacity. The photocatalytic activity of these materials was studied in the photoreduction of CO₂ with H₂O as the reductant in the gaseous phase. The composites exhibited excellent photoactivity compared to undoped g-C₃N₄. The CH₄ production rate over 10FeCN and 15FeCN composites (2.8 × 10^-2 and 2.9 × 10^-2 μmol h^-1 g^-1, respectively) was ca. 7 times higher than that over pristine g-C₃N₄ (0.4 × 10^-2 μmol h^-1 g^-1). This outstanding photocatalytic property of these composites was explained by the light absorption expansion and the prevention of photogenerated electron-hole pairs recombination due to its Z-scheme structure.

Adsorption of norfloxacin from aqueous solution on biochar derived from spent coffee ground: Master variables and response surface method optimized adsorption process

In this study, biochar derived from spent coffee grounds (SCGB) was used to adsorb norfloxacin (NOR) in water. The biochar properties were interpreted by analysis of the specific surface area, morphology, structure, thermal stability, and functional groups. The impacts of pH, NOR, and ion's present on SCGB performance were examined. The NOR adsorption mode of SCGB is best suited to the Langmuir model (R² = 0.974) with maximum absorption capacity (69.8 mg g^-1). By using a Response Surface Method (RSM), optimal adsorption was also found at pH of 6.26, NOR of 24.69 mg L^-1, and SCGB of 1.32 g L^-1. Compared with biochars derived from agriculture such as corn stalks, willow branches, potato stem, reed stalks, cauliflower roots, wheat straw, the NOR adsorption capacity of SCGB was 2-30 times higher, but less than 3-4 times for biochars made from Salix mongolica, luffa sponge and polydopamine microspheres. These findings reveal that spent coffee grounds biochar could effectively remove NOR from aqueous solutions. Approaching biochar derived from coffee grounds would be a promising eco-friendly solution because it utilizes solid waste, saves costs, and creates adsorbents to deal with emerging pollutants like antibiotics.

Mesoporous and adsorption behavior of algal biochar prepared via sequential hydrothermal carbonization and ZnCl2 activation

In this study, biochar derived from brown algal Ascophyllum nodosum was synthesized through hydrothermal carbonization (HTC) coupling with ZnCl₂ chemical activation and applied as a sustainable adsorbent for antibiotic removal from water exemplified by ciprofloxacin (CIP). Various surface analysis techniques such as Brunauer-Emmett-Teller (BET), scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and zeta potential were used to clarify the surface properties of prepared biochars. The adsorption performance of biochars was investigated using batch adsorption experiments with a variety of parameters (initial pH, ionic types, temperature and water matrixes). The application of prepared biochar in CIP removal showed a good result of adsorption capacity (150-400 mg g^-1) in different conditions. Overall, algal biochars, as a product recycled from biowaste, demonstrated a novel and promising adsorbent for effective and sustainable method for removal of antibiotics from water.

Z-Scheme MoS2/TiO2/graphene nanohybrid photocatalysts for visible light-induced degradation for highly efficient water disinfection and antibacterial activity

A new Z-scheme MoS2/TiO2/graphene nanohybrid effectively degraded antibiotics, heavy metals and microorganisms under visible irradiation.

Microwave-assisted gasification of biomass for sustainable and energy-efficient biohydrogen and biosyngas production: A state-of-the-art review

Biohydrogen and biosyngas are among the sustainable bioenergy products from biomass resources through gasification. Microwave-assisted gasification (MAG) is still a novel technology, but it is definitely a promising conversion technology to achieve a sustainable bioeconomy. Although this technology shows a massive potential to be fully implemented in the near future, the selectivity and efficiency of biohydrogen and syngas production still need enhancements and further research to secure a cost-effective and energy-efficient industrialization. This article comprehensively reviews the regular, microwave-induced plasma, and catalytic MAG systems in relation to their biohydrogen and biosyngas production, carbon conversion efficiency, and tar removal while discussing the significance of optimal operating conditions and considerations in the gasification system design. Several perspectives such as benefits, challenges, numerical simulations, and scalable opportunities are also explored to provide factual insights for further research and industrial application.

Arsenic-contaminated groundwater and its potential health risk: A case study in Long An and Tien Giang provinces of the Mekong Delta, Vietnam

The occurrence of arsenic (As) in groundwater (drilled well water) that were used for drinking, cooking, and personal hygiene and its risks to human health in Long An and Tien Giang provinces (Mekong delta, Vietnam) were evaluated in this study. The average As concentrations were 15.92 ± 11.4 μg/L (n = 24, Long An) and 4.95 ± 4.7 μg/L (n = 24, Tien Giang). The average concentrations of As in Long An had not reached the WHO and QCVN 01: 2009/BYT healthy drinking water standard (10 μg/L). When used as a source of water for drinking and daily activities, arsenic-contaminated groundwater may have a direct impact on human health. The risk assessment from groundwater established by the US Environmental Protection Agency (USEPA) was conducted. The risk assessment showed that the average cancer risk (CR) values were 8.68 × 10^-4 (adults) and 2.39 × 10^-3 (children) for Long An, and 2.70 × 10^-4 (adults) and 7.43 × 10^-4 (children) for Tien Giang. These results were significantly higher than the CR (1 × 10^-4) proposed by the USEPA. The adverse health effect was therefore specifically warned by the use of arsenic-contaminated groundwater. This research offers valuable knowledge for efficient water management approaches to guarantee local communities' health protection.

Structure-guided machine learning prediction of drug resistance mutations in Abelson 1 kinase

Kinases play crucial roles in cellular signalling and biological processes with their dysregulation associated with diseases, including cancers. Kinase inhibitors, most notably those targeting ABeLson 1 (ABL1) kinase in chronic myeloid leukemia, have had a significant impact on cancer survival, yet emergence of resistance mutations can reduce their effectiveness, leading to therapeutic failure. Limited effort, however, has been devoted to developing tools to accurately identify ABL1 resistance mutations, as well as providing insights into their molecular mechanisms. Here we investigated the structural basis of ABL1 mutations modulating binding affinity of eight FDA-approved drugs. We found mutations impair affinity of type I and type II inhibitors differently and used this insight to developed a novel web-based diagnostic tool, SUSPECT-ABL, to pre-emptively predict resistance profiles and binding free-energy changes (ΔΔG) of all possible ABL1 mutations against inhibitors with different binding modes. Resistance mutations in ABL1 were successfully identified, achieving a Matthew's Correlation Coefficient of up to 0.73 and the resulting change in ligand binding affinity with a Pearson's correlation of up to 0.77, with performances consistent across non-redundant blind tests. Through an in silico saturation mutagenesis, our tool has identified possibly emerging resistance mutations, which offers opportunities for in vivo experimental validation. We believe SUSPECT-ABL will be an important tool not just for improving precision medicine efforts, but for facilitating the development of next-generation inhibitors that are less prone to resistance. We have made our tool freely available at http://biosig.unimelb.edu.au/suspect_abl/.

Adsorption characteristics of tetracycline onto particulate polyethylene in dilute aqueous solutions

The presence of ultrafine plastics particles and its potential to concentrate and transport organic contaminants in aquatic environments have become a major concern in recent years. Specifically, the uptake of hazardous chemicals by plastics particles may affect the distribution and bioavailability of the chemicals. In this study, the adsorption of tetracycline (TC), an antibiotic frequently found in aquatic environments, on high-density polyethylene (PE) particles with the average size of 45 μm, was investigated. The PE particles were characterized for surface acidity for the first time. Results showed that pH controls the surface charge of PE particles. TC adsorption onto PE particles was rapid as expected following the pseudo-second-order rate law (r² > 0.99). Polar forces in addition to specific chemical interactions, such as hydrogen bonding and hydrophophilicity controlled TC adsorption onto PE particles. Parameters, including pH, dissolved organic matter, ionic strength, major cations and anions affected TC adsorption onto PE micro-particles. Results indicated that PE particles can function as a carrier of antibiotics in the aquatic environment, which potentially imposes ecosystem and human health risks.

Nature-inspired slippery polymer thin film for ice-repellent applications

In this study, the authors investigated the anti-icing performance of a hierarchical slippery polymer thin film that is inspired by structures of the lotus leaf and Nepenthes pitcher plant. The polymer solution was mixed with the lubricant at the appropriate concentration to achieve slippery properties. The dry etching method followed by the spin-coating process was used to generate a uniform polymer microstructure on the thin film. The polymer nanostructure was then yielded by an additional plasma-etching method using carbon tetrafluoride (CF4) gas. The anti-icing efficiency was then compared with that of the non-functional samples to demonstrate the advantages of combination in all criteria. Moreover, a theoretical prediction based on the free-energy approach was used to measure the nucleation time at the interface and illustrated good agreement with real-time measurement. The results propose a new and facile approach for outdoor anti-icing applications.

Adsorption of copper (II) in aqueous solution using biochars derived from Ascophyllum nodosum seaweed

There has been growing research interest in exploiting biochar for cost-effective. removal of different pollutants. Heavy metals, especially copper II (Cu II) is highly toxic and nonbiodegradable pollutants, and has been major source of environmental pollution. In this study adsorption of Cu (II) on seaweed (Ascophyllum nodosum)-derived biochar was systematically examined. The removal efficiency based on surface property of biochar and type of interactions associated with biochar produced at varying pyrolysis conditions were investigated. The highest removal efficiency of Cu (II) from aqueous media was >99% with 223 mg g-1 Cu (II) adsorption capacity observed by biochar derived at 700 °C and pH 5. Langmuir adsorption isotherm described the adsorption mechanisms of Cu (II) on biochar with cationic and anionic electrostatic attractions, surface precipitation, and pore depositions. Thus, this study shows that waste biomass (seaweed) could be a valuable bioresource for heavy metal remediation from various water bodies.

Efficacy of nimotuzumab (hR3) conjugated with 131I or 90Y in laryngeal carcinoma xenograft mouse model

PURPOSE

The humanized monoclonal antibody hR3, both alone and in combination with other chemotherapeutic agents and radiotherapy, can be used to treat head and neck cancers. Substantial progress has been made in the development of targeted radioimmunotherapy using iodine-131 (¹³¹I) and yttrium-90 (⁹⁰Y) radioisotopes in recent years. In the present study, we examined the efficacy of hR3 conjugated with ¹³¹I or ⁹⁰Y to inhibit tumor growth in a laryngeal carcinoma xenograft tumor model.

METHODS

hR3 was labeled with ¹³¹I or ⁹⁰Y to generate the conjugates ¹³¹I-hR3 or ⁹⁰Y-hR3. The conjugates were incubated with HEp-2 laryngeal carcinoma cells to evaluate binding capacity. The efficacy of the labeled hR3 conjugates to treat laryngeal cancer was also evaluated in nude mice inoculated with HEp-2 tumors.

RESULTS

The purified radioimmunoconjugates with specific activities of 187-191 MBq/mg had radiochemical purity >98% and >80% immunoreactivity with HEp-2 cells. Mice with HEp-2 xenografts treated with ¹³¹I-hR3 or ⁹⁰Y-hR3 showed reduced tumor volume and improved survival rates compared to the untreated control group and the group treated with unlabeled hR3. At equivalent doses, radioimmunotherapeutic hR3 labeled with ⁹⁰Y had increased tumor inhibition activity compared to hR3 labeled with ¹³¹I.

CONCLUSIONS

¹³¹I-hR3 and ⁹⁰Y-hR3 are promising targeted radiopharmaceuticals for treatment of head and neck cancers, especially laryngeal cancers.

Anti-icing performance on aluminum surfaces and proposed model for freezing time calculation

In this work, we proposed a facile approach to fabricate a superhydrophobic surface for anti-icing performance in terms of adhesive strength and freezing time. A hierarchical structure was generated on as-received Al plates using a wet etching method and followed with a low energy chemical compound coating. Surfaces after treatment exhibited the great water repellent properties with a high contact angle and extremely low sliding angle. An anti-icing investigation was carried out by using a custom-built apparatus and demonstrated the expected low adhesion and freezing time for icephobic applications. In addition, we proposed a model for calculating the freezing time. The experimented results were compared with theoretical calculation and demonstrated the good agreement, illustrating the importance of theoretical contribution in design icephobic surfaces. Therefore, this study provides a guideline for the understanding of icing phenomena and designing of icephobic surfaces.

SAP domain forms a flexible part of DNA aperture in Ku70/80

Nonhomologous end joining (NHEJ) is a DNA repair mechanism that religates double-strand DNA breaks to maintain genomic integrity during the entire cell cycle. The Ku70/80 complex recognizes DNA breaks and serves as an essential hub for recruitment of NHEJ components. Here, we describe intramolecular interactions of the Ku70 C-terminal domain, known as the SAP domain. Using single-particle cryo-electron microscopy, mass spectrometric analysis of intermolecular cross-linking and molecular modelling simulations, we captured variable positions of the SAP domain depending on DNA binding. The first position was localized at the DNA aperture in the Ku70/80 apo form but was not observed in the DNA-bound state. The second position, which was observed in both apo and DNA-bound states, was found below the DNA aperture, close to the helical arm of Ku70. The localization of the SAP domain in the DNA aperture suggests a function as a flexible entry gate for broken DNA. DATABASES: EM maps have been deposited in EMDB (EMD-11933). Coordinates have been deposited in Protein Data Bank (PDB 7AXZ). Other data are available from corresponding authors upon a request.

ThermoMutDB: a thermodynamic database for missense mutations

Proteins are intricate, dynamic structures, and small changes in their amino acid sequences can lead to large effects on their folding, stability and dynamics. To facilitate the further development and evaluation of methods to predict these changes, we have developed ThermoMutDB, a manually curated database containing >14,669 experimental data of thermodynamic parameters for wild type and mutant proteins. This represents an increase of 83% in unique mutations over previous databases and includes thermodynamic information on 204 new proteins. During manual curation we have also corrected annotation errors in previously curated entries. Associated with each entry, we have included information on the unfolding Gibbs free energy and melting temperature change, and have associated entries with available experimental structural information. ThermoMutDB supports users to contribute to new data points and programmatic access to the database via a RESTful API. ThermoMutDB is freely available at: http://biosig.unimelb.edu.au/thermomutdb.

The Design of Experiment Approach, Rheology for Optimization of a Topical Anti-inflammatory and Analgesic Cream

BACKGROUND

A capsaicin cream was formulated by optimizing the rheological stability, the release behavior of the drug, and the pharmacological effect.

OBJECTIVES

This study aimed to: (a) apply Design of Experiment approach to study the rheological stability and release behaviors of a drug (capsaicin) from a formulated oil-in-water cream and (b) investigate the skin irritation and antiinflammatory and analgesic effects of the optimized cream.

METHODS

The cream prepared by the emulsification method was optimized using the central composite design, and then the pharmacological effect in experimental animals was determined using Complete Freund's adjuvant (CFA).

RESULTS

The effects of a permeation enhancer (X1), Vaseline (X2), and surfactants (X3) on the fluctuation of the ratio of the viscous modulus (G ') to elastic modulus (G') (tan δ) after three cycles of cooling-heating (10-40 °C), flux, and skin deposition of capsaicin after 8 h on mouse skin were statistically analyzed and optimized. The final obtained CAP-cream did not cause irritation in the rabbit model and produced comparable anti-inflammatory and analgesic effects to the reference product (Voltaren® emulgel).

CONCLUSIONS

This study successfully integrated the DoE approach, rheological science, and pharmacological studies to develop a stable and highly effective semi-solid product containing capsaicin.

Differential inflammatory potential of particulate matter (PM) size fractions from Imperial Valley, CA

Particulate matter (PM) in Imperial Valley originates from a variety of sources such as agriculture, traffic at the border crossing, emissions from the cross-border city of Mexicali, and the drying lakebed of the Salton Sea. Dust storms in Imperial Valley, California regularly lead to exceedances of the federal air quality standards for PM10 (diameter less than 10 microns). To determine if there are differences in the composition and biological response to Imperial County PM by size, ambient PM samples were collected from a sampling unit stationed in the northern-most part of the valley, South of the Salton Sea. Ultrafine, fine, and coarse PM samples were collected and extracted separately. Chemical composition of each size fraction was obtained after extraction by using several analytical techniques, and biological response was measured by exposing a cell line of macrophages to particles and quantifying subsequent gene expression. Biological measurements demonstrated coarse PM induced an inflammatory response in macrophages measured in increases of inflammatory markers IL-1β, IL-6, IL-8 and CXCL2 expression, whereas ultrafine and fine PM only demonstrated significant increases in expression of CYP1a1. These differential responses were due not only to particle size, but to the distinct chemical profiles of each size faction as well. Community groups in Imperial Valley have already completed several projects to learn more about local air quality, giving residents access to data that provides real-time levels of PM2.5 and PM10 as well as recommendations on health-based practices dependent on the current AQI (air quality index). However, to date there is no information on the composition or toxicity of ambient PM from the region. The data presented here could provide more definitive information on the toxicity of PM by size, and further inform the community on local air quality.

Battery-Free and Noninvasive Estimation of Food pH and CO2 Concentration for Food Monitoring Based on Pressure Measurement

In this paper, we developed a battery-free system that can be used to estimate food pH level and carbon dioxide (CO₂) concentration in a food package from headspace pressure measurement. While being stored, food quality degrades gradually as a function of time and storage conditions. A food monitoring system is, therefore, essential to prevent the detrimental problems of food waste and eating spoilt food. Since conventional works that invasively measure food pH level and CO₂ concentration in food packages have shown several disadvantages in terms of power consumption, system size, cost, and reliability, our study proposes a system utilizing package headspace pressure to accurately and noninvasively extract food pH level and CO₂ concentration, which reflection food quality. To read pressure data in the food container, a 2.5 cm × 2.5 cm smart sensor tag was designed and integrated with near-field communication (NFC)-based energy harvesting technology for battery-free operation. To validate the reliability of the proposed extraction method, various experiments were conducted with different foods, such as pork, chicken, and fish, in two storage environments. The experimental results show that the designed system can operate in a fully passive mode to communicate with an NFC-enabled smartphone. High correlation coefficients of the headspace pressure with the food pH level and the headspace CO₂ concentration were observed in all experiments, demonstrating the ability of the proposed system to estimate food pH level and CO₂ concentration with high accuracy. A linear regression model was then trained to linearly fit the sensor data. To display the estimated results, we also developed an Android mobile application with an easy-to-use interface.

Moth-Eye Mimicking Solid Slippery Glass Surface with Icephobicity, Transparency, and Self-Healing

Slippery liquid-infused porous surfaces (SLIPSs) have been actively studied to improve the limitations of superhydrophobic (SHP) surfaces, especially the defects of the nonwetting chemical coating layer and the weak mechanical robustness of surface micro/nanostructures. However, the SLIPSs also have several drawbacks including volatilization and leakage of lubricant caused by long-term usage. In this study, we suggest the use of icephobic, highly transparent, and self-healing solid slippery surface to overcome the limitations of both surfaces (SLIPS and SHP) by combining specific biomimetic morphology and intrinsic properties of paraffin wax. A moth-eye mimicking nanopillar structure was prepared instead of a porous structure and was coated with solid paraffin wax for water repellence. Moth-eye structures enable high surface transparency based on antireflective effect, and the paraffin layer can recover from damage due to sunlight exposure. Furthermore, the paraffin coating on the nanopillars provides an air trap, resulting in a low heat transfer rate, increasing freezing time and reducing adhesion strength between the ice droplet and the surface. The heat transfer model was also calculated to elucidate the effects of the nanopillar height and paraffin layer thickness. The antireflection and freezing time of the surfaces are enhanced with increase in nanopillar height. The paraffin layer slightly deteriorates the transmittance but enhances the icephobicity. The solar cell efficiency using a biomimetic solid slippery surface is higher than that of bare glass due to the antireflective effect. This integrated biomimetic solid slippery surface is multifunctional due to its self-cleaning, anti-icing, antireflection, and self-healing properties and may replace SLIPS and SHP surfaces.

Drug-Induced Anaphylaxis in a Vietnamese Pharmacovigilance Database: Trends and Specific Signals from a Disproportionality Analysis

INTRODUCTION

Despite the numerous studies investigating drug-induced anaphylaxis (DIA), understanding and quantitative data analysis in developing countries remain limited. The aim of our study is to describe and quantify DIA using the National Pharmacovigilance Database of Vietnam (NPDV).

METHODS

Spontaneous reporting of adverse drug reactions (ADRs) recorded between 2010 and 2016 were retrospectively analysed to identify DIA reports. The trend and characteristics of DIA cases were described. Multivariate disproportionality analysis was used for signal generation.

RESULTS

Overall, 4873 DIA cases (13.2% of total ADRs) were recorded in the NPDV, 111 of which resulted in death (82% of total ADR-induced deaths) over a 7-year period. There was a remarkable increase in DIA reporting over time (p < 0.001). The incidence rates of DIA reporting per total ADRs and per 100,000 inhabitants remained high (mean rates [95% CI] of 12.06 [9.88-14.24] and 0.77 [0.33-1.20], respectively). Concerning suspected drugs, systemic antibiotics (n = 3318, 68%) were mostly reported with a reporting odds ratio (ROR) and 95% CI of 2.35 [2.20-2.51]. In the case of antibiotic-induced anaphylaxis, the third-generation cephalosporins were predominant (n = 1961, 40.2%, ROR 2.39 [2.24-2.55]). We also noted drugs generally associated with DIA such as contrast agents (ROR 2.43 [2.04-2.88]) and anaesthetics (ROR 4.02 [3.30-4.89]). Furthermore, unexpected signals were observed for alpha-chymotrypsin (ROR 1.75 [1.23-2.44]) and amoxicillin/sulbactam (ROR 1.59 [1.18-2.10]), uncommonly reported in western countries.

CONCLUSION

In recent years, cases of drug-induced DIA have increased in Vietnam, mostly due to antibiotics and third-generation cephalosporins. The inappropriate use of these drugs should be taken into account. Our findings also highlighted typical Vietnamese signals for alpha-chymotrypsin- and amoxicillin/sulbactam-induced anaphylaxis, which may relate to a specific sociological context in resource-limited countries.

The degradation of phthalate esters in marine sediments by persulfate over iron-cerium oxide catalyst

This study investigated the degradation of phthalate esters (PAEs) in marine sediments by sodium persulfate (Na₂S₂O₈, PS) activated by a series of iron-cerium (Fe-Ce) bimetallic catalysts (FCBCs). The surface structure and chemistry of the FCBCs were characterized by TEM, HRTEM, XRD, FTIR, BET and XPS. Results show successful synthesis of FCBC catalysts. Factors such as PS concentration, Fe to Ce molar ratio, catalyst dosage, and initial pH that might affect PAEs degradation were investigated. Results revealed that PAEs was degraded more effectively over FCBC with a Fe-Ce molar ratio of 1.5:1. Increase in Ce improved the catalytic activity of FCBC due to increase in oxygen storage capacity (OSC). Acidic conditions enhanced PAEs degradation with a maximum degradation of 86% at pH 2 and rate constant (k_obs) of 1.5 × 10^-1 h^-1 when the PS and FCBC concentrations were to 1.0 × 10^-5 M and 1.67 g/L, respectively. Di-(2-ethylhexyl) phthalate (DEHP) was a salient marker of PAE contamination in sediments. Dimethyl phthalate (DMP) and diethyl phthalate (DEP) were easier to degrade than DEHP, diisononyl phthalate (DINP), dioctyl phthalate (DnOP) and diisononyl phthalate (DIDP). The synergistic catalytic effect of Fe³⁺/Fe²⁺ and Ce⁴⁺/Ce³⁺ redox couples, in addition to electron transfer of oxygen vacancies, activated S₂O₈^2- to generate SO₄^- and HO radicals, which played the major role of PAEs degradation. 5,5-dimethyl-1-pyrroline N-oxide (DMPO) spin trapping EPR studies verified the crucial role of SO₄^- and HO in the oxidative degradation process. FCBC/PS oxidation exhibited high-performance for the remediation of PAEs-contaminated marine sediments.

Cobalt-impregnated biochar (Co-SCG) for heterogeneous activation of peroxymonosulfate for removal of tetracycline in water

Cobalt-impregnated spent coffee ground biochar (Co-SCG) was synthesized and applied for tetracycline (TC) removal from water. The results showed that Co-SCG biochar exhibited marked adsorption capacity and catalyst activity. The maximum adsorption capacity of Co-SCG biochar toward TC was 370.37 mg g^-1. TC was almost completely degraded in 25 min with a rate constant of 17.78 × 10^-2 min^-1 under the following optimal condition: TC concentration of 0.2 mM, PMS concentration of 0.6 mM, Co-SCG dosage of 100 mg L^-1, and pH of 7.0. Co-SCG was characterized for surface properties by SEM, TEM, HRTEM, and BET. The concentration of 16 PAHs in Co-SCG biochar was studied also. Results demonstrated that Co-SCG was an effective eco-friendly material for the removal of tetracycline from water.

Hospital wastewater treatment by sponge membrane bioreactor coupled with ozonation process

Herein, a sponge membrane bioreactor (Sponge-MBR) combined with ozonation process was performed to remove the antibiotics which frequently existed in the hospital wastewater. Whilst seven antibiotics i.e., norfloxacin, ciprofloxacin, ofloxacin, sulfamethoxazole, erythromycin, tetracycline and trimethoprim were widely used in medications, this integration was applied for the evaluation of treatment performance under different fluxes. As the results, whilst the antibiotics were eliminated about 45-93%, the tetracycline was completely removed (100%) using Sponge-MBR operated at the flux of 10 LMH. For enhancement of antibiotics removal, the ozonation process was introduced to treat the membrane permeate. Overall efficiencies were 97 ± 2% (trimethoprim), 92 ± 4% (norfloxacin), 90 ± 1% (erythromycin), 88 ± 4% (ofloxacin), 83 ± 7 (ciprofloxacin) and 66 ± 1% (sulfamethoxazole). These results demonstrated Sponge-MBR coupled with ozonation could be a prospective technology for the hospital wastewater treatment.