Effect of microwave-assisted ionic liquid/acidic ionic liquid pretreatment on the morphology, structure, and enhanced delignification of rice straw

Microwave Encounters Ionic Liquid: Synergistic Mechanism, Synthesis and Emerging Applications

Progress in microwave (MW) energy application technology has stimulated remarkable advances in manufacturing and high-quality applications of ionic liquids (ILs) that are generally used as novel media in chemical engineering. This Review focuses on an emerging technology via the combination of MW energy and the usage of ILs, termed microwave-assisted ionic liquid (MAIL) technology. In comparison to conventional routes that rely on heat transfer through media, the contactless and unique MW heating exploits the electromagnetic wave-ions interactions to deliver energy to IL molecules, accelerating the process of material synthesis, catalytic reactions, and so on. In addition to the inherent advantages of ILs, including outstanding solubility, and well-tuned thermophysical properties, MAIL technology has exhibited great potential in process intensification to meet the requirement of efficient, economic chemical production. Here we start with an introduction to principles of MW heating, highlighting fundamental mechanisms of MW induced process intensification based on ILs. Next, the synergies of MW energy and ILs employed in materials synthesis, as well as their merits, are documented. The emerging applications of MAIL technologies are summarized in the next sections, involving tumor therapy, organic catalysis, separations, and bioconversions. Finally, the current challenges and future opportunities of this emerging technology are discussed.

Unveiling the potential of novel recyclable deep eutectic solvent pretreatment: Effective separation of lignin from poplar hydrolyzed residue

To effectively convert the fermentable sugars present in lignocellulosic biomass into biofuels and additional value-added products, it is crucial to remove lignin from the biomass. With the intention of expeditiously remove lignin from poplar wood and improve cellulose saccharification, an innovative ternary deep eutectic solvent (DES) benzyl triethyl ammonium chloride-ethylene glycol-FeCl3 (T-EG-F) was studied for the pretreatment of poplar hydrolyzed residue (PHR). The results revealed that following T-EG-F DES pretreatment at 130 °C for 4 h, the lignin removal rate reached 91.88 %. The effect of DES on PHR and regenerated lignin was comprehensively investigated using X-ray diffractometer (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), Thermogravimetric (TG) and other characterization methods, providing valuable insights into the mechanism of this innovative biomass pretreatment. Moreover, there was a significant improvement in the enzyme digestibility of the DES pretreatment residue. At 48 h, the enzyme load of 30 FPU/g cellulose achieved a remarkable enzyme digestibility of 97.31 %, and this value exhibited a notable increase of 6.56 times compared to the untreated poplar sample. In addition, the T-EG-F could be recycled and reused. This study demonstrates that the potential of T-EG-F DES pretreatment as a green and efficient method for lignin dissociation from lignocellulosic biomass, offering a promising approach for biomass component separation.

Energy Applications of Ionic Liquids: Recent Developments and Future Prospects

Ionic liquids (ILs) consisting entirely of ions exhibit many fascinating and tunable properties, making them promising functional materials for a large number of energy-related applications. For example, ILs have been employed as electrolytes for electrochemical energy storage and conversion, as heat transfer fluids and phase-change materials for thermal energy transfer and storage, as solvents and/or catalysts for CO2 capture, CO2 conversion, biomass treatment and biofuel extraction, and as high-energy propellants for aerospace applications. This paper provides an extensive overview on the various energy applications of ILs and offers some thinking and viewpoints on the current challenges and emerging opportunities in each area. The basic fundamentals (structures and properties) of ILs are first introduced. Then, motivations and successful applications of ILs in the energy field are concisely outlined. Later, a detailed review of recent representative works in each area is provided. For each application, the role of ILs and their associated benefits are elaborated. Research trends and insights into the selection of ILs to achieve improved performance are analyzed as well. Challenges and future opportunities are pointed out before the paper is concluded.

Environment friendly emerging techniques for the treatment of waste biomass: a focus on microwave and ultrasonication processes

In the recent past, an increasing interest is mostly observed in using microwave and ultrasonic irradiation to aid the biological conversion of waste materials into value-added products. This study is focused on various individual impacts of microwaves and ultrasonic waves for the treatment of biomass before the synthesis of value-added products. Following, a comprehensive review of the mechanisms governing microwaves and ultrasonication as the treatment methods, their effects on biomass disruption, solubilization of organic matter, modification of the crystalline structure, enzymatic hydrolysis and production of reducing sugars was performed. However, based on the lab-scale experiments evaluated, microwaves and ultrasonication were studied to be economically and energetically ineffective despite their beneficial effects on the waste biomass. This article reviews some of the difficulties associated with using microwaves and ultrasonic irradiation for the efficient processing of waste biomasses and identified some potential directions for future study.

Development of lignocellulosic biorefineries for the sustainable production of biofuels: Towards circular bioeconomy

The idea of environment friendly and affordable renewable energy resources has prompted the industry to focus on the set up of biorefineries for sustainable bioeconomy. Lignocellulosic biomass (LCB) is considered as an abundantly available renewable feedstock for the production of biofuels which can potentially reduce the dependence on petrochemical refineries. By utilizing various conversion technologies, an integrated biorefinery platform of LCB can be created, embracing the idea of the 'circular bioeconomy'. The development of effective pretreatment methods and biocatalytic systems by various bioengineering and machine learning approaches could reduce the bioprocessing costs, thereby making biomass-based biorefinery more sustainable. This review summarizes the development and advances in the lignocellulosic biorefineries from the LCB to the final product stage using various different state-of-the-art approaches for the progress of circular bioeconomy. The life cycle assessment which generates knowledge on the environmental impacts related to biofuel production chains is also summarized.

Proficient bioconversion of rice straw biomass to bioethanol using a novel combinatorial pretreatment approach based on deep eutectic solvent, microwave irradiation and laccase

Current study is the first report of the combined application of chemical (deep eutectic solvent), physical (microwave irradiation) and biological (laccase) pretreatment strategies for enhancing the enzymatic digestibility of rice straw biomass. Pretreated rice straw biomass was saccharified by cellulase/xylanase from Aspergillus japonicus DSB2 to get a sugar yield of 252.36 mg/g biomass. Design of Experiment based optimization of pretreatment and saccharification variables increased the total sugar yield by 1.67 times (421.5 mg/g biomass, saccharification efficiency 72.6%). Sugary hydrolysate was ethanol-fermented by Saccharomyces cerevisiae and Pichia stipitis to achieve an ethanol yield of 214 mg/g biomass (bioconversion efficiency 72.5%). Structural/chemical aberrations induced in the biomass due to pretreatment were elucidated by X-ray diffraction, scanning electron microscopy, Fourier-transform infrared spectroscopy, and ¹H nuclear magnetic resonance techniques to unravel the pretreatment mechanisms. Combined application of various physico-chemical/biological pretreatment may be a promising approach for proficient bioconversion of rice straw biomass.

Strategies of pretreatment of feedstocks for optimized bioethanol production: distinct and integrated approaches

Bioethanol is recognized as a valuable substitute for renewable energy sources to meet the fuel and energy demand of the nation, considered an environmentally friendly resource obtained from agricultural residues such as sugarcane bagasse, rice straw, husk, wheat straw and corn stover. The energy demand is sustained using lignocellulosic biomass to produce bioethanol. Lignocellulosic biomass (LCBs) is the point of attention in replacing the dependence on fossil fuels. The recalcitrant structure of the lignocellulosic biomass is disrupted using effective pretreatment techniques that separate complex interlinked structures among cellulose, hemicellulose, and lignin. Pretreatment of biomass involves various physical, chemical, biological, and physiochemical protocols which are of importance, dependent upon their individual or combined dissolution effect. Physical pretreatment involves a reduction in the size of the biomass using mechanical, extrusion, irradiation, and sonification methods while chemical pretreatment involves the breaking of various bonds present in the LCB structure. This can be obtained by using an acidic, alkaline, ionic liquid, and organosolvent methods. Biological pretreatment is considered an environment-friendly and safe process involving various bacterial and fungal microorganisms. Distinct pretreatment methods, when combined and utilized in synchronization lead to more effective disruption of LCB, making biomass more accessible for further processing. These could be utilized in terms of their effectiveness for a particular type of cellulosic fiber and are namely steam explosion, liquid hot water, ammonia fibre explosion, CO2 explosion, and wet air oxidation methods. The present review encircles various distinct and integrated pretreatment processes developed till now and their advancement according to the current trend and future aspects to make lignocellulosic biomass available for further hydrolysis and fermentation.

Challenges and perspectives of green-like lignocellulose pretreatments selectable for low-cost biofuels and high-value bioproduction

Lignocellulose represents the most abundant carbon-capturing substance that is convertible for biofuels and bioproduction. Although biomass pretreatments have been broadly applied to reduce lignocellulose recalcitrance for enhanced enzymatic saccharification, they mostly require strong conditions with potential secondary waste release. By classifying all major types of pretreatments that have been recently conducted with different sources of lignocellulose substrates, this study sorted out their distinct roles for wall polymer extraction and destruction, leading to the optimal pretreatments evaluated for cost-effective biomass enzymatic saccharification to maximize biofuel production. Notably, all undigestible lignocellulose residues are also aimed for effective conversion into value-added bioproduction. Meanwhile, desired pretreatments were proposed for the generation of highly-valuable nanomaterials such as cellulose nanocrystals, lignin nanoparticles, functional wood, carbon dots, porous and graphitic nanocarbons. Therefore, this article has proposed a novel strategy that integrates cost-effective and green-like pretreatments with desirable lignocellulose substrates for a full lignocellulose utilization with zero-biomass-waste liberation.

A Combination Method of Liquid Hot Water and Phosphotungstic Acid Pretreatment for Improving the Enzymatic Saccharification Efficiency of Rice Straw

Chemical pretreatment can significantly improve the enzymatic hydrolysis efficiency of lignocellulosic biomass, thereby improving the yield of sugar materials for the production of cellulosic ethanol, but commonly used acid–base catalysts are difficult to recover and reuse. In this work, a combination method of liquid hot water (LHW) and phosphotungstic acid (PTA) pretreatment was performed to improve the saccharification efficiency of rice straw, and we attempted to evaluate the reuse effect of PTA catalysts. The rice straw was first treated with LHW at 180 °C for 90 min, and then treated with 20 mM PTA at 130 °C for 60 min. After pretreatment, the cellulose hydrolysis efficiency and glucose recovery of the rice straw increased by 201.85% and 164.25%, respectively. Glucose accounted for 96.8% of the total reducing sugar in the final enzymatic hydrolysate. After each PTA pretreatment, approximately 70.8–73.2% of the PTA catalyst could be recycled. Moreover, the catalytic activity of the PTA catalyst that had been used five times did not decrease. The improved enzymatic saccharification efficiency was attributed to the removal of 89.24% hemicellulose and 21.33% lignin from the lignocellulosic substrate. The two-step LHW-PTA pretreatment could pretreat biomass in the field of cellulosic ethanol production.

Prospects of utilizing seawater as a reaction medium for pretreatment and saccharification of rice straw

The transition towards a bio-based economy has led to an unprecedented surge in fresh water consumption that renders biofuel a high water footprint product. The depleting fresh water resources have exacerbated the situation which necessitates the exploration of non-potable water for biorefinery purposes. In the current study, seawater is used as a plausible alternative reaction medium for pretreatment and saccharification of rice straw. Response Surface Methodology (RSM) based on Box-Behnken Design (BBD) was employed to model, predict and validate cellulose release and reducing sugar yield from rice straw subjected to microwave-NaOH pretreatment. The optimized pretreatment conditions were determined to be 8.54% substrate loading, 1.94% NaOH and 4.09 min which resulted in the maximum cellulose release of 65.43% and reducing sugar yield of 0.554 g/g. Several physico-chemical studies of the raw and pretreated biomass were carried out using bomb calorimetry, scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, Brunauer-Emmett-Teller (BET) analysis and thermal gravimetric analysis (TGA) to examine the efficacy of pretreatment. Evidences of an apparent delignification was substantiated by the increase in surface area from 7.719 to 44.188 m² g^-1and pore volume from 0.039 to 0.071 mlg^-1 which was consistent with the decrease in energy density and distorted surface morphology of the pretreated biomass. Further, the FTIR revealed a reduced peak in the absorption spectral bands at 1636 cm^-1 which confirmed the pretreatment mediated degradation of lignin and hemicellulose. This finding provides evidence on the prospects of utilizing abundantly available seawater resource as a reaction medium for sustainable biofuel production.

Recent advances of lignin valorization techniques toward sustainable aromatics and potential benchmarks to fossil refinery products

Aromatic compounds are important fuels and key chemical precursors for organic synthesis, however the current aromatics market are mainly relying on fossil resources which will eventually contribute to carbon emissions. Lignin has been recognized as a drop-in substitution to conventional aromatics, with its values gradually realized after tremendous research efforts in the recent five years. To facilitate the development of a possible lignin economics, this study overviewed the recent advances of various biorefinery techniques and the remaining challenging for lignin valorization. Starting with recent discovery of unexplored lignin structures, the potential functions of lignin related chemical structures were emphasized. The important breakthrough of lignin-first pretreatment, catalytic lignin depolymerization, and the high value products with possible benchmark with modern aromatics were reviewed with possible future targets. Possible retrofit of conventional petroleum refinery for lignin products were also introduced and hopefully paving a way to progressively migrate the industry towards carbon neutrality.

Synergistic Cascade Strategy Based on Modifying Tumor Microenvironment for Enhanced Breast Cancer Therapy

Background: Triple-negative breast cancer (TNBC) is the most aggressive subtype of breast cancer with very few treatment options. Although tumor-targeted nanomedicines hold great promise for the treatment of TNBC, the tumor microenvironment (TME) continues to be a major cause of failure in nanotherapy and immunotherapy. To overcome this barrier, we designed a new synergistic cascade strategy (SCS) that uses mild hyperthermia and smart drug delivery system (SDDS) to alter TME resistance in order to improve drug delivery and therapeutic efficacy of TNBC. Methods: Mild hyperthermia was produced by microwave (MW) irradiation. SDDS were formulated with thermosensitive polymer-lipid nanoparticles (HA-BNPs@Ptx), composed of polymer PLGA, phospholipid DPPC, hyaluronic acid (HA, a differentiation-44-targeted molecule, also known as CD44), 1-butyl-3-methylimidazolium-L-lactate (BML, a MW sensitizer), and paclitaxel (Ptx, chemotherapy drug). 4T1 breast tumor-bearing mice were treated with two-step MW combined with HA-BNPs@Ptx. Tumors in mice were pretreated with first MW irradiation prior to nanoparticle injection to modify and promote TME and promoting nanoparticle uptake and retention. The second MW irradiation was performed on the tumor 24 h after the injection of HA-BNPs@Ptx to produce a synergistic cascade effect through activating BML, thus, enhancing a hyperthermia effect, and instantly releasing Ptx at the tumor site. Results: Multifunctional CD44-targeted nanoparticles HA-BNPs@Ptx were successfully prepared and validated in vitro. After the first MW irradiation of tumors in mice, the intratumoral perfusion increased by two times, and the nanoparticle uptake was augmented by seven times. With the second MW irradiation, remarkable antitumor effects were obtained with the inhibition rate up to 88%. In addition, immunohistochemical analysis showed that SCS therapy could not only promote tumor cell apoptosis but also significantly reduce lung metastasis. Conclusion: The SCS using mild hyperthermia combined with SDDS can significantly improve the efficacy of TNBC treatment in mice by modifying TME and hyperthermia-mediated EPR effects.

Enhancement of Biological Pretreatment on Rice Straw by an Ionic Liquid or Surfactant

Fungal delignification can be a feasible process to pretreat biomass for bioethanol production if its performance is improved in terms of efficiency through a few modifications. The aim of this study was to enhance the biodelignification pretreatment of rice straw using laccase in the presence of ionic liquid (1-Allyl-3-methylimidazolium chloride, [AMIM]Cl) or surfactant (TritonX-100). Addition of 750 mg/L [AMIM]Cl and 500 mg/L TritonX-100 increases the lignin removal to 18.49% and 31.79%, which is higher than that of laccase only (11.97%). The enzymatic saccharification process was carried out based on different strategies. The highest cellulose conversion, 40.96%, 38.24%, and 37.91%, was obtained after 72 h of enzymatic saccharification when the substrate was washed with distilled water after pretreatment of rice straw with laccase + TritonX-100, laccase + [AMIM]Cl, and laccase only, respectively. In addition, the morphology and structure changes of pretreated and untreated rice straw were studied. Both surface area and cellulose crystallinity are substantially altered after laccase + [AMIM]Cl and laccase + TritonX-100 pretreatment. Enhanced saccharification efficiency of rice straw was achieved by laccase pretreatment with ionic liquid or surfactant in a single system.

Conversion of rice husk into fermentable sugar and silica using acid-catalyzed ionic liquid pretreatment

Rice husk is a bulky byproduct with a high silica content from rice milling. In this study, the application of an acid-catalyzed ionic liquid (IL) pretreatment was studied for processing rice husks with a rugged structure. The pretreatment conditions were 130°C for 30 min with 1.2 wt% HCl. The results of enzymatic hydrolysis demonstrated that cellulose conversion of HCl-BMIMCl-treated at 48 h was increased by 660.05%, 538.81%, and 376.55% compared with the untreated, HCl-treated, and BMIMCl-treated rice husks, respectively. Composition analysis demonstrated that most of the hemicellulose was removed in the acid-IL combined treatment. Moreover, scanning electron microscopy, X-ray diffraction (XRD), and Fourier transform infrared analyses indicated that the crystalline structure and outer silica layer of the rice husks were efficiently broken up. The results revealed that the HCl-catalyzed dissolution is highly favorable for the industrial application of rick husks in the production of fermentable sugar and high-purity silica.

Chemo-enzymatic approaches for consolidated bioconversion of Saccharum spontaneum biomass to ethanol-biofuel

A novel strategy involving sodium dodecylsulfate (SDS) (SDS assisted tris (2-hydroxyethyl) methyl- ammonium methyl sulphate ([TMA][MeSO₄], ionic liquid) pretreatment of Saccharum spontaneum biomass (SSB) following its enzymatic saccharification, and conversion into ethanol-biofuel in a consolidated bioprocess (CBP) was developed. Ionic liquid stable enzyme preparation developed from Bacillus subtilis G₂ was used for saccharification. Optimized pretreatment and saccharification variables enhanced the sugar yield (2.35-fold), which was fermented to ethanol content of 104.42 mg/g biomass with an efficiency of 35.73%. The pretreated biomass was examined for textural/ultrastructural alterations by scanning electron microscopy (SEM), ¹H/¹³C nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), surface area measurements, water retention value, and cellulase adsorption isotherms. The combined [TMA][MeSO₄] and SDS pretreatment disrupted the lignocellulosic microfibrils, and increased the porosity and surface area. The study provides new mechanistic insights on combined IL and surfactant pretreatment of biomass for its efficient conversion to biofuel.

Cellulose Recovery from Agri-Food Residues by Effective Cavitational Treatments

Residual biomass from agri-food production chain and forestry are available in huge amounts for further valorisation processes. Delignification is usually the crucial step in the production of biofuels by fermentation as well as in the conversion of cellulose into high added-value compounds. High-intensity ultrasound (US) and hydrodynamic cavitation (HC) have been widely exploited as effective pretreatment techniques for biomass conversion and in particular for cellulose recovery. Due to their peculiar mechanisms, cavitational treatments promote an effective lignocellulosic matrix dismantling with delignification at low temperature (35–50 °C). Cavitation also promotes cellulose decrystallization due to a partial depolymerization. The aim of this review is to highlight recent advances in US and HC-assisted delignification and further cellulose recovery and valorisation.

Biomass utilization and production of biofuels from carbon neutral materials

The availability of organic matters in vast quantities from the agricultural/industrial practices has long been a significant environmental challenge. These wastes have created global issues in increasing the levels of BOD or COD in water as well as in soil or air segments. Such wastes can be converted into bioenergy using a specific conversion platform in conjunction with the appropriate utilization of the methods such as anaerobic digestion, secondary waste treatment, or efficient hydrolytic breakdown as these can promote bioenergy production to mitigate the environmental issues. By the proper utilization of waste organics and by adopting innovative approaches, one can develop bioenergy processes to meet the energy needs of the society. Waste organic matters from plant origins or other agro-sources, biopolymers, or complex organic matters (cellulose, hemicelluloses, non-consumable starches or proteins) can be used as cheap raw carbon resources to produce biofuels or biogases to fulfill the ever increasing energy demands. Attempts have been made for bioenergy production by biosynthesizing, methanol, n-butanol, ethanol, algal biodiesel, and biohydrogen using different types of organic matters via biotechnological/chemical routes to meet the world's energy need by producing least amount of toxic gases (reduction up to 20-70% in concentration) in order to promote sustainable green environmental growth. This review emphasizes on the nature of available wastes, different strategies for its breakdown or hydrolysis, efficient microbial systems. Some representative examples of biomasses source that are used for bioenergy production by providing critical information are discussed. Furthermore, bioenergy production from the plant-based organic matters and environmental issues are also discussed. Advanced biofuels from the organic matters are discussed with efficient microbial and chemical processes for the promotion of biofuel production from the utilization of plant biomasses.

Quantitative recovery and regeneration of acidic ionic liquid 1-butyl-3-methylimidazolium hydrogen sulphate via industrial strategy for sustainable biomass processing

Quantitative recovery is necessary for scale-up application of acidic ionic liquids (AILs). Ultrafiltration and bipolar membrane electrodialysis (BMED) was employed for the recovery and regeneration of acidic ionic liquid 1-butyl-3-methylimidazolium hydrogen sulphate (Bmim[HSO₄]) after biomass pretreatment. Ultrafiltration was designed for the purification of BMED feed solution. During BMED treatment, Bmim⁺ retention with OH^- generation occurred in mixing section and SO₄^2- immigration with H⁺ generation occurred in aciding section. Resulting aqueous Bmim[OH] in mixing section and H₂SO₄ in aciding section could be utilized for quantitative synthesis of Bmim[HSO₄]. Influence of BMED operating mode and major parameters including BMED feed concentration and current density of BMED module were studied in detail. The highest recovery ratio for Bmim⁺ and SO₄^2- reached 96.2% and 96.0%. And the lowest energy consumption of specific Bmim[HSO₄] recovery approached 9.0 kw∙h/kg. Insight gained from this study suggested a sustainable biomass processing methodology using AILs.

Optimization of Microwave-Assisted Alkali Pretreatment for Enhancement of Delignification Process of Cocoa Pod Husk

In this study, the optimization of microwave-assisted alkaline (MAA) pretreatment is performed to attain the optimal operating parameters for the delignification of cocoa pod husk (CPH). The MAA performance was examined by heating the CPH solid with different particle sizes (60–120 mesh) and NaOH solution with a different sample to a solvent (SS) ratio (0.02–0.05 g/L), for short irradiation time (1–4 min). Box-Behnken Design (BBD) was utilized to optimize the percentage of lignocellulose composition changes. The results show that by enlarging particle size, the content of lignin and cellulose decreased while hemicellulose increased. By prolong irradiation time, the content of lignin and hemicellulose decreased while cellulose elevated. On the other hand, increasing the SS ratio was not significant for hemicellulose content changes. From FTIR and SEM characterization, the MAA drove the removal of lignin and hemicellulose of CPH and increased cellulose slightly. Supported by kinetic study which conducted in this work, it was exhibited that MAA pretreatment technology is an effective delignification method of CPH which can tackle the bottleneck of its commercial biofuel production. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

Dissolution reaction kinetics and mass transfer during aqueous choline chloride pre-treatment of oak wood

Lignocellulosic biomass processing employing ionic liquids is of recent research interest for the biorefinery industry. The data on biomass dissolution kinetics in ionic liquids is important for designing scale-up pre-treatment reactor design. In this study, the reaction mechanism and kinetics of oak wood dissolution in aqueous choline chloride was investigated. In an extended effort, a correlation of dimensionless numbers was developed for the estimation the mass transfer coefficient. The analyses suggested that oak wood dissolution in choline chloride occurred in two stages. The diffusion of ionic liquid through the product layer was the dominating rate-controlling step in the first stage of dissolution followed by the surface chemical reaction in the second stage. The diffusivity of choline chloride into the oak wood matrix was ranging between 2.96E-14 and 2.84E-13 m²/s. The activation energy of the diffusion controlled stage and surface chemical reaction controlled stage was approximately 24.2 and 40.3 kJ mol^-1, respectively. The proposed mathematical correlation for mass transfer coefficient fitted well with the experimental mass transfer coefficient values.

Transforming lignocellulosic biomass into biofuels enabled by ionic liquid pretreatment

Processes that can convert lignocellulosic biomass into biofuels and chemicals are particularly attractive considering renewability and minimal environmental impact. Ionic liquids (ILs) have been used as novel solvents in the process development in that they can effectively deconstruct recalcitrant lignocellulosic biomass for high sugar yield and lignin recovery. From cellulose-dissolving ILs to choline-based and protic acidic ILs, extensive research in this field has been done, driven by the promising future of IL pretreatment. Meanwhile, shortcomings and technological hurdles are ascertained during research and developments. It is necessary to present a general overview of recent developments and challenges in this field. In this review paper, three aspects of advances in IL pretreatment are critically analyzed: biocompatible ILs, protic acidic ILs and combinatory pretreatments.

Key process parameters for deep eutectic solvents pretreatment of lignocellulosic biomass materials: A review

Deep eutectic solvent (DES) has been considered as a novel green solvent for lignocellulosic biomass pretreatment. The efficiency of DES pretreatment is affected by the synergy of various process parameters. The study of effect of DES physicochemical properties and pretreatment reaction conditions on the mechanism of lignocellulose biomass fractionation was of great significance for the development of biomass conversion. Form the view of process control, this review summarized recent advances in DES pretreatment, analyzed the challenges, and prospected the future development of this research field.

Recent developments in the application of kraft pulping alkaline chemicals for lignocellulosic pretreatment: Potential beneficiation of green liquor dregs waste

Lignocellulosic waste has offered a cost-effective and food security-wise substrate for the generation of biofuels and value-added products. However, its recalcitrant properties necessitate pretreatment. Of the various pretreatment methods, alkaline techniques have gained prominence as efficient catalysts. The kraft pulping industry represents a major hub for the generation of white, black and green liquor alkaline solutions during the paper making process. Despite its well-known significance in the kraft pulping process, green liquor (GL) has been widely applied for lignocellulosic pretreatment. Recently, green liquor dregs (GLD), an alkaline waste generated from the kraft pulping industry has piqued interest. Therefore, this review outlines the general flow of the kraft pulping process and the alkaline chemicals derived. In addition, the extensively studied GL for lignocellulosic pretreatment is discussed. Subsequently, the potential beneficiation of GLD for lignocellulosic pretreatment is presented. Furthermore, the challenges and prospects of lignocellulosic pretreatments are highlighted.

Synergistic benefits from a lignin-first biorefinery of poplar via coupling acesulfamate ionic liquid followed by mild alkaline extraction

A novel mind-set, termed lignin-first biorefinery, is bewitching to synchronously boost lignin output for entirely lignocellulosic utilization. A lignin-first fractionation, using a food-additive derived ionic liquid (1-ethyl-3-methylimidazolium acesulfamate, emimAce) and mild alkaline pretreatments, was formed for the purposely isolating poplar lignin, whilst delivering a cellulose-rich substrate that can be easily available for enzymatic digestion. The emimAce-driven lignin, alkali-soluble lignin and hemicellulose, and accessible cellulose were sequentially gained. We introduce a lignin-first approach to extract the amorphous fractions, destroy the robust architecture, and reform cellulose-I to II, thereby advancing the cellulose bioconversion from 15.4 to 90.5%. A harvest of 70.7% lignin, 52.1% hemicellulose, and 330.1 mg/g glucose was fulfilled from raw poplar. A structural ''beginning-to-end'' analysis of lignin inferred that emimAce ions are expected to interact with lignin β-aryl-ether due to their aromatic character. It was reasonable to derive benefits from lignin-first technique that can substantially augment the domain of biorefinering.

Recent developments in pretreatment technologies on lignocellulosic biomass: Effect of key parameters, technological improvements, and challenges

Lignocellulosic biomass is an inexpensive renewable source that can be used to produce biofuels and bioproducts. The recalcitrance nature of biomass hampers polysaccharide accessibility for enzymes and microbes. Several pretreatment methods have been developed for the conversion of lignocellulosic biomass into value-added products. However, these pretreatment methods also produce a wide range of secondary compounds, which are inhibitory to enzymes and microorganisms. The selection of an effective and efficient pretreatment method discussed in the review and its process optimization can significantly reduce the production of inhibitory compounds and may lead to enhanced production of fermentable sugars and biochemicals. Moreover, evolutionary and genetic engineering approaches are being used for the improvement of microbial tolerance towards inhibitors. Advancements in pretreatment and detoxification technologies may help to increase the productivity of lignocellulose-based biorefinery. In this review, we discuss the recent advancements in lignocellulosic biomass pretreatment technologies and strategies for the removal of inhibitors.

Effects of Gamma-Valerolactone Assisted Fractionation of Ball-Milled Pine Wood on Lignin Extraction and Its Characterization as Well as Its Corresponding Cellulose Digestion

Gamma-valerolactone (GVL) was found to be an effective, sustainable alternative in the lignocellulose defragmentation for carbohydrate isolation and, more specifically, for lignin dissolution. In this study, it was adapted as a green pretreatment reagent for milled pinewood biomass. The pretreatment evaluation was performed for temperature (140–180 °C) and reaction time (2–4 h) using 80% aqueous GVL to obtain the highest enzymatic digestibility of 92% and highest lignin yield of 33%. Moreover, the results revealed a positive correlation (R2 = 0.82) between the lignin removal rate and the crystallinity index of the treated biomass. Moreover, under the aforementioned conditions, lignin with varying molecular weights (150–300) was obtained by derivatization followed by reductive cleavage (DFRC). 2D heteronuclear single quantum coherence nuclear magnetic resonance (2D-HSQC-NMR) spectrum analysis and gel permeation chromatography (GPC) also revealed versatile lignin properties with relatively high β-O-4 linkages (23.8%–31.1%) as well as average molecular weights of 2847–4164 with a corresponding polydispersity of 2.54–2.96, indicating this lignin to be a heterogeneous feedstock for value-added applications of biomass. All this suggested that this gamma-valerolactone based pretreatment method, which is distinctively advantageous in terms of its effectiveness and sustainability, can indeed be a competitive option for lignocellulosic biorefineries.

Facilely reducing recalcitrance of lignocellulosic biomass by a newly developed ethylamine-based deep eutectic solvent for biobutanol fermentation

BACKGROUND

Biobutanol is promising and renewable alternative to traditional fossil fuels and could be produced by Clostridium species from lignocellulosic biomass. However, biomass is recalcitrant to be hydrolyzed into fermentable sugars attributed to the densely packed structure by layers of lignin. Development of pretreatment reagents and processes for increasing surface area, removing hemicellulose and lignin, and enhancing the relative content of cellulose is currently an area of great interest. Deep eutectic solvents (DESs), a new class of green solvents, are effective in the pretreatment of lignocellulosic biomass. However, it remains challenging to achieve high titers of total sugars and usually requires combinatorial pretreatment with other reagents. In this study, we aim to develop novel DESs with high application potential in biomass pretreatment and high biocompatibility for biobutanol fermentation.

RESULTS

Several DESs with betaine chloride and ethylamine chloride (EaCl) as hydrogen bond acceptors were synthesized. Among them, EaCl:LAC with lactic acid as hydrogen bond donor displayed the best performance in the pretreatment of corncob. Only by single pretreatment with EaCl:LAC, total sugars as high as 53.5 g L^-1 could be reached. Consecutive batches for pretreatment of corncob were performed using gradiently decreased cellulase by 5 FPU g^-1. At the end of the sixth batch, the concentration and specific yield of total sugars were 58.8 g L^-1 and 706 g kg^-1 pretreated corncob, saving a total of 50% cellulase. Utilizing hydrolysate as carbon source, butanol titer of 10.4 g L^-1 was achieved with butanol yield of 137 g kg^-1 pretreated corncob by Clostridium saccharobutylicum DSM13864.

CONCLUSIONS

Ethylamine and lactic acid-based deep eutectic solvent is promising in pretreatment of corncob with high total sugar concentrations and compatible for biobutanol fermentation. This study provides an efficient pretreatment reagent for facilely reducing recalcitrance of lignocellulosic materials and a promising process for biobutanol fermentation from renewable biomass.