1
|
Kumar P, Kermanshahi-pour A, Brar SK, Xu CC, He QS, Evans S, Rainey JK. Enzymatic digestibility of lignocellulosic wood biomass: Effect of enzyme treatment in supercritical carbon dioxide and biomass pretreatment. Heliyon 2023; 9:e21811. [PMID: 38027598 PMCID: PMC10660486 DOI: 10.1016/j.heliyon.2023.e21811] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/29/2023] [Revised: 10/20/2023] [Accepted: 10/29/2023] [Indexed: 12/01/2023] Open
Abstract
Energy and resource intensive mechanical and chemical pretreatment along with the use of hazardous chemicals are major bottlenecks in widespread lignocellulosic biomass utilization. Herein, the study investigated different pretreatment methods on spruce wood namely supercritical CO2 (scCO2) pretreatment, ultrasound-assisted alkaline pretreatment, and acetosolv pulping-alkaline hydrogen peroxide bleaching, to enhance the enzymatic digestibility of wood using optimized enzyme cocktail. Also, the effect of scCO2 pretreatment on enzyme cocktail was investigated after optimizing the concentration and temperature of cellulolytic enzymes. The impact of scCO2 and ultrasound-assisted alkaline pretreatments of wood were insignificant for the enzymatic digestibility, and acetosolv pulping-alkaline hydrogen peroxide bleaching was the most effective pretreatment that showed the release of total reducing sugar yield (TRS) of ∼95.0 wt% of total hydrolyzable sugars (THS) in enzymatic hydrolysis. The optimized enzyme cocktail showed higher yield than individual enzymes with degree of synergism 1.34 among the enzymes, and scCO2 pretreatment of cocktail for 0.5-1.0 h at 10.0-22.0 MPa and 38.0-54.0 °C had insignificant effect on the enzyme's primary and global secondary structure of cocktail and its activity.
Collapse
Affiliation(s)
- Pawan Kumar
- Biorefining and Remediation Laboratory, Department of Process Engineering and Applied Science, Dalhousie University, Halifax, Nova Scotia B3 J 1Z1, Canada
| | - Azadeh Kermanshahi-pour
- Biorefining and Remediation Laboratory, Department of Process Engineering and Applied Science, Dalhousie University, Halifax, Nova Scotia B3 J 1Z1, Canada
| | - Satinder Kaur Brar
- Department of Civil Engineering, Lassonde School of Engineering, York University, North York, Toronto, Ontario M3J 1P3, Canada
| | - Chunbao Charles Xu
- School of Energy and Environment, City University of Hong Kong, Hong Kong SAR, Hong Kong
| | - Quan Sophia He
- Department of Engineering, Faculty of Agriculture, Dalhousie University, Truro, Nova Scotia B2N 5E3, Canada
| | - Sara Evans
- Department of Chemistry, Dalhousie University, Halifax, Nova Scotia B3H 4R2, Canada
| | - Jan K. Rainey
- Department of Chemistry, Dalhousie University, Halifax, Nova Scotia B3H 4R2, Canada
- Department of Biochemistry & Molecular Biology and School of Biomedical Engineering, Dalhousie University, Halifax, Nova Scotia B3H 4R2, Canada
| |
Collapse
|
2
|
Yasmeen R, Sarfraz M, Shah WUH, Ivascu L, Cifuentes-Faura J. The impact of public awareness, infrastructure, and technological development with economic growth on solid waste management of European countries: does governance quality matters. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2023; 30:113442-113456. [PMID: 37851251 DOI: 10.1007/s11356-023-30356-4] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/31/2023] [Accepted: 10/05/2023] [Indexed: 10/19/2023]
Abstract
Solid waste generation is a significant problem affecting the ecosystem, human health, and safety. However, the issue is not given the attention it truly deserves. Consequently, this study is aimed at assessing the impact of various factors, such as economic growth, public awareness, infrastructure, and technological advancements, on generating municipal waste in the European Union (EU) for the period 1995-2020. Furthermore, the study incorporated the mediating effect of economic growth and government effectiveness with public awareness, infrastructure, and technological development to reduce waste generation. By employing the bias-corrected method of moments, the study finds that overall waste generation does not decrease over time in EU economies. Furthermore, Denmark is the top-ranked country among the sampled countries to generate waste. However, Finland is at the top in government effectiveness. The empirical findings showed that economic growth is the significant reason for the increase in solid waste production. Additionally, the interaction effects of economic growth with public awareness, infrastructure, and technological development are positive. However, the individual impact of public awareness, infrastructure, and technological development is positive in reducing waste generation. Governance effectiveness is a significant tool to lower waste generation in European economies.
Collapse
Affiliation(s)
- Rizwana Yasmeen
- School of Economics and Management, Panzhihua University, Panzhihua, 617000, China
| | - Muddassar Sarfraz
- School of Management, Zhejiang Shuren University, Hangzhou, 310015, China
| | - Wasi Ul Hassan Shah
- School of Management, Zhejiang Shuren University, Hangzhou, 310015, China.
- Department of Economics, University of Religions and Denominations, Qom, 37491-13357, Iran.
| | - Larisa Ivascu
- Faculty of Management in Production and Transportation, Politehnica University of Timisoara, 300191, Timisoara, Romania
| | | |
Collapse
|
3
|
Cai J, Li H, Jing Q, Feng K, Takaoka M. Atomically dispersed copper sites on titanium zirconium oxide accelerate the simultaneous oxidative removal of organic carbon and ammonia from landfill leachate. JOURNAL OF HAZARDOUS MATERIALS 2023; 457:131773. [PMID: 37295333 DOI: 10.1016/j.jhazmat.2023.131773] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/01/2023] [Revised: 05/23/2023] [Accepted: 06/02/2023] [Indexed: 06/12/2023]
Abstract
Landfill leachate is a refractory wastewater. Low-temperature catalytic air oxidation (LTCAO) has shown considerable potential for leachate treatment owing to its green and simple operation, but the simultaneous removal of chemical oxygen demand (COD) and ammonia from leachate remains challenging. Herein, TiZrO4 @CuSA hollow spheres with high-loading single-atom Cu were synthesized using isovolumic vacuum impregnation and co-calcination methods, and the catalyst was applied to the LTCAO treatment of real leachate. Consequently, the removal rate of UV254 reached 66% at 90 °C within 5 h, while that for COD was 88%. Simultaneously, the NH3/NH4+ (33.5 mg/L, 100 wt%) in the leachate was oxidized to N2 (88.2 wt%), NO2--N (11.0 wt%), and NO3--N (0.3 wt%) owing to the effect of free radicals. The single-atom Cu co-catalyst in TiZrO4 @CuSA exhibited a localized surface plasmon resonance effect at the active center, which could quickly transfer electrons to O2 in water to form O2.- with a high activation efficiency. The degradation products were determined and the deduced pathway was as follows: the bonds joining benzene rings were first broken, and then the ring structure was further opened to produce acetic acid and other simple organic macromolecules, which were finally mineralized to CO2 and H2O.
Collapse
Affiliation(s)
- Jiabai Cai
- Department of Environmental Engineering, Graduate School of Engineering, Kyoto University, Kyoto 615-8540, Japan; Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen 518055, China
| | - Huan Li
- Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen 518055, China.
| | - Qi Jing
- Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen 518055, China
| | - Kai Feng
- Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen 518055, China
| | - Masaki Takaoka
- Department of Environmental Engineering, Graduate School of Engineering, Kyoto University, Kyoto 615-8540, Japan.
| |
Collapse
|
4
|
Zhang B, Liu X, Bao J. High solids loading pretreatment: The core of lignocellulose biorefinery as an industrial technology - An overview. BIORESOURCE TECHNOLOGY 2023; 369:128334. [PMID: 36403909 DOI: 10.1016/j.biortech.2022.128334] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/22/2022] [Revised: 11/08/2022] [Accepted: 11/11/2022] [Indexed: 06/16/2023]
Abstract
Pretreatment is the first and most determinative, yet the least mature step of lignocellulose biorefinery chain. The current stagnation of biorefinery commercialization indicates the barriers of the existing pretreatment technologies are needed to be unlocked. This review focused on one of the core factors, the high lignocellulose solids loading in pretreatment. The high solids loading of pretreatment significantly reduces water input, energy requirement, toxic compound discharge, solid/liquid separation costs, and carbon dioxide emissions, improves the titers of sugars and biproducts to meet the industrial requirements. Meanwhile, lignocellulose feedstock after high solids loading pretreatment is compatible with the existing logistics system for densification, packaging, storage, and transportation. Both the technical-economic analysis and the cellulosic ethanol conversion performance suggest that the solids loading in the pretreatment step need to be further elevated towards an industrial technology and the effective solutions should be proposed to the technical barriers in high solids loading pretreatment operations.
Collapse
Affiliation(s)
- Bin Zhang
- State Key Laboratory of Bioreactor Engineering, East China University of Science and Technology, 130 Meilong Road, Shanghai 200237, China
| | - Xiucai Liu
- Cathay Biotech Inc, 1690 Cailun Road, Zhangjiang Hi-Tech Park, Shanghai 201203, China
| | - Jie Bao
- State Key Laboratory of Bioreactor Engineering, East China University of Science and Technology, 130 Meilong Road, Shanghai 200237, China.
| |
Collapse
|
5
|
Zheng B, Yu S, Chen Z, Huo YX. A consolidated review of commercial-scale high-value products from lignocellulosic biomass. Front Microbiol 2022; 13:933882. [PMID: 36081794 PMCID: PMC9445815 DOI: 10.3389/fmicb.2022.933882] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/01/2022] [Accepted: 07/27/2022] [Indexed: 11/13/2022] Open
Abstract
For decades, lignocellulosic biomass has been introduced to the public as the most important raw material for the environmentally and economically sustainable production of high-valued bioproducts by microorganisms. However, due to the strong recalcitrant structure, the lignocellulosic materials have major limitations to obtain fermentable sugars for transformation into value-added products, e.g., bioethanol, biobutanol, biohydrogen, etc. In this review, we analyzed the recent trends in bioenergy production from pretreated lignocellulose, with special attention to the new strategies for overcoming pretreatment barriers. In addition, persistent challenges in developing for low-cost advanced processing technologies are also pointed out, illustrating new approaches to addressing the global energy crisis and climate change caused by the use of fossil fuels. The insights given in this study will enable a better understanding of current processes and facilitate further development on lignocellulosic bioenergy production.
Collapse
Affiliation(s)
- Bo Zheng
- Key Laboratory of Molecular Medicine and Biotherapy, School of Life Science, Beijing Institute of Technology, Beijing, China
- Center for Infectious Disease Research, School of Medicine, Tsinghua University, Beijing, China
| | - Shengzhu Yu
- Key Laboratory of Molecular Medicine and Biotherapy, School of Life Science, Beijing Institute of Technology, Beijing, China
| | - Zhenya Chen
- Key Laboratory of Molecular Medicine and Biotherapy, School of Life Science, Beijing Institute of Technology, Beijing, China
| | - Yi-Xin Huo
- Key Laboratory of Molecular Medicine and Biotherapy, School of Life Science, Beijing Institute of Technology, Beijing, China
| |
Collapse
|
6
|
Su Y, Fang L, Wang P, Lai C, Huang C, Ling Z, Yong Q. Coproduction of xylooligosaccharides and monosaccharides from hardwood by a combination of acetic acid pretreatment, mechanical refining and enzymatic hydrolysis. BIORESOURCE TECHNOLOGY 2022; 358:127365. [PMID: 35618187 DOI: 10.1016/j.biortech.2022.127365] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/29/2022] [Revised: 05/19/2022] [Accepted: 05/20/2022] [Indexed: 06/15/2023]
Abstract
Sequential biorefinery treatments of acetic acid (HAC) pretreatment, Papir Forsknings Institutet (PFI) milling and enzymatic hydrolysis were demonstrated for coproduction of xylooligosaccharides (XOS) and fermentable monosaccharides. Results indicated that 36.2% XOS (50.8% X2-X3) and 17.0% low DP xylans were achieved using a HAC pretreatment with a combined severity factor of 0.78. The HAC pretreatment resulted in a XOS-rich prehydrolyzate with a low molecular weight of 1.28 kDa. The endo-xylanase hydrolysis was conducted on the pretreatment liquor to elevate XOS yield and the content of higher-value X2-X3. Moreover, fermentable glucose production from the pretreated residue increased by 2.3 folds when introducing an additional step of PFI refining prior to enzymatic digestion. Properties of substrate including cellulose accessibility, crystallite size, crystalline index and water retention value were in close relationships with enzymatic digestibility. The implementation of proposed biorefinery process will give more insights into the efficient construction of a wood-derived sugar platform.
Collapse
Affiliation(s)
- Yan Su
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Chemical Engineering, Nanjing Forestry University, Nanjing 210037, People's Republic of China
| | - Lingyan Fang
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Chemical Engineering, Nanjing Forestry University, Nanjing 210037, People's Republic of China
| | - Peng Wang
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Chemical Engineering, Nanjing Forestry University, Nanjing 210037, People's Republic of China
| | - Chenhuan Lai
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Chemical Engineering, Nanjing Forestry University, Nanjing 210037, People's Republic of China
| | - Caoxing Huang
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Chemical Engineering, Nanjing Forestry University, Nanjing 210037, People's Republic of China; Key Laboratory of Forestry Genetics & Biotechnology (Nanjing Forestry University), Ministry of Education, Nanjing 210037, People's Republic of China
| | - Zhe Ling
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Chemical Engineering, Nanjing Forestry University, Nanjing 210037, People's Republic of China
| | - Qiang Yong
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Chemical Engineering, Nanjing Forestry University, Nanjing 210037, People's Republic of China; Key Laboratory of Forestry Genetics & Biotechnology (Nanjing Forestry University), Ministry of Education, Nanjing 210037, People's Republic of China.
| |
Collapse
|
7
|
Yang J, Gao C, Yang X, Su Y, Shi S, Han L. Effect of combined wet alkaline mechanical pretreatment on enzymatic hydrolysis of corn stover and its mechanism. BIOTECHNOLOGY FOR BIOFUELS AND BIOPRODUCTS 2022; 15:31. [PMID: 35300735 PMCID: PMC8932242 DOI: 10.1186/s13068-022-02130-0] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 01/18/2022] [Accepted: 03/08/2022] [Indexed: 11/10/2022]
Abstract
BACKGROUND To further optimize the mechanochemical pretreatment process, a combined wet alkaline mechanical pretreatment of corn stover was proposed with a short time and less chemical consumption at room temperature. RESULTS The combined alkaline mechanical pretreatment significantly enhanced enzymatic hydrolysis resulting a highest glucose yield (YG) of 91.9% with 3% NaOH and ball milling (BM) for 10 min. At this optimal condition, 44.4% lignin was removed and major portion of cellulose was retained (86.6%). The prehydrolysate contained by-products such as monosaccharides, oligosaccharides, acetic acid, and lignin but no furfural and 5-HMF. The alkaline concentration showed a significant impact on glucose yield, while the BM time was less important. Quantitative correlation analysis showed that YG (%) = 0.68 × BM time (min) + 19.27 × NaOH concentration (%) + 13.71 (R2 = 0.85), YG = 6.35 × glucan content - 231.84 (R2 = 0.84), and YG = - 14.22 × lignin content + 282.70 (R2 = 0.87). CONCLUSION The combined wet alkaline mechanical pretreatment at room temperature had a boosting effect on the yield of enzymatic hydrolysis with short treatment time and less chemical consumption. The impact of the physical and chemical properties of corn stover pretreated with different BM times and/or different NaOH concentrations on the subsequent enzymatic hydrolysis was investigated, which would be beneficial to illustrate the effective mechanism of the mechanochemical pretreatment method.
Collapse
Affiliation(s)
- Jie Yang
- Engineering Laboratory for Agro Biomass Recycling & Valorizing, College of Engineering, China Agricultural University, Box 191, Beijing, 100083, China
| | - Chongfeng Gao
- Engineering Laboratory for Agro Biomass Recycling & Valorizing, College of Engineering, China Agricultural University, Box 191, Beijing, 100083, China
| | - Xueqi Yang
- Engineering Laboratory for Agro Biomass Recycling & Valorizing, College of Engineering, China Agricultural University, Box 191, Beijing, 100083, China
| | - Yanfu Su
- Engineering Laboratory for Agro Biomass Recycling & Valorizing, College of Engineering, China Agricultural University, Box 191, Beijing, 100083, China
| | - Suan Shi
- Engineering Laboratory for Agro Biomass Recycling & Valorizing, College of Engineering, China Agricultural University, Box 191, Beijing, 100083, China.
| | - Lujia Han
- Engineering Laboratory for Agro Biomass Recycling & Valorizing, College of Engineering, China Agricultural University, Box 191, Beijing, 100083, China
| |
Collapse
|
8
|
Ashokkumar V, Venkatkarthick R, Jayashree S, Chuetor S, Dharmaraj S, Kumar G, Chen WH, Ngamcharussrivichai C. Recent advances in lignocellulosic biomass for biofuels and value-added bioproducts - A critical review. BIORESOURCE TECHNOLOGY 2022; 344:126195. [PMID: 34710596 DOI: 10.1016/j.biortech.2021.126195] [Citation(s) in RCA: 102] [Impact Index Per Article: 51.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/07/2021] [Revised: 10/16/2021] [Accepted: 10/19/2021] [Indexed: 06/13/2023]
Abstract
Lignocellulosic biomass is a highly renewable, economical, and carbon-neutral feedstock containing sugar-rich moieties that can be processed to produce second-generation biofuels and bio-sourced compounds. However, due to their heterogeneous multi-scale structure, the lignocellulosic materials have major limitations to valorization and exhibit recalcitrance to saccharification or hydrolysis by enzymes. In this context, this review focuses on the latest methods available and state-of-the-art technologies in the pretreatment of lignocellulosic biomass, which aids the disintegration of the complex materials into monomeric units. In addition, this review deals with the genetic engineering techniques to develop advanced strategies for fermentation processes or microbial cell factories to generate desired products in native or modified hosts. Further, it also intends to bridge the gap in developing various economically feasible lignocellulosic products and chemicals using biorefining technologies.
Collapse
Affiliation(s)
- Veeramuthu Ashokkumar
- Center of Excellence in Catalysis for Bioenergy and Renewable Chemicals (CBRC), Faculty of Science, Chulalongkorn University, Pathum Wan, Bangkok 10330, Thailand.
| | | | - Shanmugam Jayashree
- Department of Biotechnology, Stella Maris College (Autonomous), Chennai, Tamil Nadu 600086, India
| | - Santi Chuetor
- Department of Chemical Engineering, Faculty of Engineering, King Mongkut's University of Technology North Bangkok (KMUTNB), Bangkok, Thailand
| | - Selvakumar Dharmaraj
- Department of Marine Biotechnology, Academy of Maritime Education and Training [AMET] (Deemed to be University), Chennai 603112, Tamil Nadu, India
| | - Gopalakrishnan Kumar
- School of Civil and Environmental Engineering, Yonsei University, Seoul 03722, Republic of Korea; Institute of Chemistry, Bioscience and Environmental Engineering, Faculty of Science and Technology, University of Stavanger, Box 8600 Forus, 4036 Stavanger, Norway
| | - Wei-Hsin Chen
- Department of Aeronautics and Astronautics, National Cheng Kung University, Tainan 701, Taiwan; Research Center for Smart Sustainable Circular Economy, Tunghai University, Taichung 407, Taiwan; Department of Mechanical Engineering, National Chin-Yi University of Technology, Taichung 411, Taiwan
| | - Chawalit Ngamcharussrivichai
- Center of Excellence in Catalysis for Bioenergy and Renewable Chemicals (CBRC), Faculty of Science, Chulalongkorn University, Pathum Wan, Bangkok 10330, Thailand; Center of Excellence on Petrochemical and Materials Technology (PETROMAT), Chulalongkorn University, Pathumwan, Bangkok 10330, Thailand
| |
Collapse
|
9
|
Zhang Q, Lu Z, Su C, Feng Z, Wang H, Yu J, Su W. High yielding, one-step mechano-enzymatic hydrolysis of cellulose to cellulose nanocrystals without bulk solvent. BIORESOURCE TECHNOLOGY 2021; 331:125015. [PMID: 33812135 DOI: 10.1016/j.biortech.2021.125015] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/10/2021] [Revised: 03/12/2021] [Accepted: 03/13/2021] [Indexed: 06/12/2023]
Abstract
Traditional methods of enzymatic hydrolysis of cellulose to cellulose nanocrystals (CNCs) are limited due to the low enzymatic efficiency and large amount of waste liquid. The purpose of this study is to improve the yield and production efficiency of CNCs by enzymatic hydrolysis. A one-step mechano-enzymatic hydrolysis method was developed by utilizing the synergy of wet grinding and enzymatic hydrolysis reaction to efficiently prepare CNCs. Under the optimal reaction conditions, the maximum CNCs yield of 49.3% was achieved with higher thermal stability and crystallinity index of 76.7%. Mechano-enzymatic hydrolysis followed the first order pseudo-kinetics, and fractal kinetics demonstrated that mechanical force of rotation speed affected the fractal dimensions and binding ability between substrate and enzyme. This study provides an alternative method to prepare CNCs, which can significantly avoid the use of bulk water, improve the production efficiency of CNCs and thus lower the production cost.
Collapse
Affiliation(s)
- Qihong Zhang
- National Engineering Research Center for Process Development of Active Pharmaceutical Ingredients, Collaborative Innovation Center of Yangtze River Delta Region Green Pharmaceuticals, Zhejiang University of Technology, Hangzhou 310014, PR China
| | - Zhaohui Lu
- National Engineering Research Center for Process Development of Active Pharmaceutical Ingredients, Collaborative Innovation Center of Yangtze River Delta Region Green Pharmaceuticals, Zhejiang University of Technology, Hangzhou 310014, PR China
| | - Chen Su
- National Engineering Research Center for Process Development of Active Pharmaceutical Ingredients, Collaborative Innovation Center of Yangtze River Delta Region Green Pharmaceuticals, Zhejiang University of Technology, Hangzhou 310014, PR China
| | - Zongmiao Feng
- Key Laboratory for Green Pharmaceutical Technologies and Related Equipment of Ministry of Education, College of Pharmaceutical Sciences, Zhejiang University of Technology, Hangzhou 310014, PR China
| | - Hui Wang
- National Engineering Research Center for Process Development of Active Pharmaceutical Ingredients, Collaborative Innovation Center of Yangtze River Delta Region Green Pharmaceuticals, Zhejiang University of Technology, Hangzhou 310014, PR China
| | - Jingbo Yu
- National Engineering Research Center for Process Development of Active Pharmaceutical Ingredients, Collaborative Innovation Center of Yangtze River Delta Region Green Pharmaceuticals, Zhejiang University of Technology, Hangzhou 310014, PR China
| | - Weike Su
- National Engineering Research Center for Process Development of Active Pharmaceutical Ingredients, Collaborative Innovation Center of Yangtze River Delta Region Green Pharmaceuticals, Zhejiang University of Technology, Hangzhou 310014, PR China; Key Laboratory for Green Pharmaceutical Technologies and Related Equipment of Ministry of Education, College of Pharmaceutical Sciences, Zhejiang University of Technology, Hangzhou 310014, PR China.
| |
Collapse
|
10
|
Cai J, Li H, Jing Q, Li D, Zhang Y. Embedding ruthenium nanoparticles in the shell layer of titanium zirconium oxide hollow spheres to catalyze the degradation of alkali lignin under mild condition. JOURNAL OF HAZARDOUS MATERIALS 2021; 411:125161. [PMID: 33485234 DOI: 10.1016/j.jhazmat.2021.125161] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/13/2020] [Revised: 12/28/2020] [Accepted: 01/13/2021] [Indexed: 06/12/2023]
Abstract
To catalyze the degradation of lignin in refractory wastewater efficiently, a new nanocomposite with Ru nanoparticles embedded on the surface of TiZrO4 hollow spheres was fabricated with three method a "sol-gel + calcination + vacuum-impregnation" template method, and the unique binary composition of TiZrO4/Ru prevented the aggregation of Ru and keep its high activity. During 3-h catalytic-oxidation at 160 °C and 2.0 MPa O2, 98% alkali lignin was degraded and 70% organic carbon was mineralized with the catalysis of TiZrO4/Ru, while the values were only 50% and 25% without analysts. The catalyst increased the catalytic-oxidation rate constant k1 (h-1) of alkali lignin from 0.282 h-1 to 1.175 h-1 because of high-efficiency hydroxyl radical production, as determined by EPR. LC-OCD showed that the catalyst decomposed alkali lignin with molecular weight 1-2 kDa to small molecules. Butyl acetate was the main intermediate product, which should be derived from the auto synthesis of butanol and acetic acid. In addition to high conversion efficiency, the catalyst had good stability with 95% capability after five cycles. In real biogas slurry treatment, an increase of biochemical to COD ratio from 0.28 to 0.51, with obvious decoloration, indicated TiZrO4/Ru enhanced the biodegradability of the refractory wastewater significantly.
Collapse
Affiliation(s)
- Jiabai Cai
- Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen 518055, China
| | - Huan Li
- Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen 518055, China.
| | - Qi Jing
- Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen 518055, China
| | - Debin Li
- Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen 518055, China
| | - Yangyang Zhang
- Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen 518055, China
| |
Collapse
|
11
|
Srivastava RK, Shetti NP, Reddy KR, Kwon EE, Nadagouda MN, Aminabhavi TM. Biomass utilization and production of biofuels from carbon neutral materials. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2021; 276:116731. [PMID: 33607352 DOI: 10.1016/j.envpol.2021.116731] [Citation(s) in RCA: 41] [Impact Index Per Article: 13.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/09/2020] [Revised: 02/01/2021] [Accepted: 02/09/2021] [Indexed: 05/22/2023]
Abstract
The availability of organic matters in vast quantities from the agricultural/industrial practices has long been a significant environmental challenge. These wastes have created global issues in increasing the levels of BOD or COD in water as well as in soil or air segments. Such wastes can be converted into bioenergy using a specific conversion platform in conjunction with the appropriate utilization of the methods such as anaerobic digestion, secondary waste treatment, or efficient hydrolytic breakdown as these can promote bioenergy production to mitigate the environmental issues. By the proper utilization of waste organics and by adopting innovative approaches, one can develop bioenergy processes to meet the energy needs of the society. Waste organic matters from plant origins or other agro-sources, biopolymers, or complex organic matters (cellulose, hemicelluloses, non-consumable starches or proteins) can be used as cheap raw carbon resources to produce biofuels or biogases to fulfill the ever increasing energy demands. Attempts have been made for bioenergy production by biosynthesizing, methanol, n-butanol, ethanol, algal biodiesel, and biohydrogen using different types of organic matters via biotechnological/chemical routes to meet the world's energy need by producing least amount of toxic gases (reduction up to 20-70% in concentration) in order to promote sustainable green environmental growth. This review emphasizes on the nature of available wastes, different strategies for its breakdown or hydrolysis, efficient microbial systems. Some representative examples of biomasses source that are used for bioenergy production by providing critical information are discussed. Furthermore, bioenergy production from the plant-based organic matters and environmental issues are also discussed. Advanced biofuels from the organic matters are discussed with efficient microbial and chemical processes for the promotion of biofuel production from the utilization of plant biomasses.
Collapse
Affiliation(s)
- Rajesh K Srivastava
- Department of Biotechnology, GIT, GITAM (Deemed to Be University), Rushikonda, Visakhapatnam, 530045, (A.P.), India
| | - Nagaraj P Shetti
- Department of Chemistry, K. L. E. Institute of Technology, Gokul, Hubballi, 580027, Karnataka, India
| | - Kakarla Raghava Reddy
- School of Chemical and Biomolecular Engineering, The University of Sydney, Sydney, NSW, 2006, Australia
| | - Eilhann E Kwon
- Department of Environment and Energy, Sejong University, Seoul, 05006, Republic of Korea
| | - Mallikarjuna N Nadagouda
- Department of Mechanical and Materials Engineering, Wright State University, Dayton, OH, 45324, USA
| | | |
Collapse
|
12
|
Determination of Kinetic and Thermodynamic Parameters of Pyrolysis of Coal and Sugarcane Bagasse Blends Pretreated by Ionic Liquid: A Step towards Optimization of Energy Systems. ENERGIES 2021. [DOI: 10.3390/en14092544] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
Pyrolysis behavior of ionic liquid (IL) pretreated coal and sugarcane bagasse (SCB) blends through thermogravimetric analysis (TGA) was studied. Three blends of coal and SCB having 3:1, 1:1, and 1:3 ratios by weight were treated with 1-ethyl-3-methylimidazolium chloride ([Emim][Cl]) at 150 °C for 3 h. Untreated and IL treated blends were then analyzed under pyrolytic conditions in a TGA at a constant ramp rate of 20 °C/min. Kinetic and thermodynamic parameters were evaluated using ten Coats-Redfern (CR) models to assess reaction mechanism. Results showed that the untreated blends followed a definite pattern and were proportional to the concentration of SCB in the blends. IL treated blends exhibited a higher average rate of degradation and total weight loss, indicating that IL had disrupted the cross-linking structure of coal and lignocellulosic structure of SCB. This will enhance the energy generation potential of biomass through thermochemical conversion processes. The lower activation energy (Ea) was calculated for IL treated blends, revealing facile thermal decomposition after IL treatment. Thermodynamic parameters, enthalpy change (ΔH), Gibbs free energy change (ΔG), and entropy change (ΔS), revealed that the pyrolysis reactions were endothermic. This study would help in designing optimized thermochemical conversion systems for energy generation.
Collapse
|
13
|
Chuetor S, Ruiz T, Barakat A, Laosiripojana N, Champreda V, Sriariyanun M. Evaluation of rice straw biopowder from alkaline-mechanical pretreatment by hydro-textural approach. BIORESOURCE TECHNOLOGY 2021; 323:124619. [PMID: 33406466 DOI: 10.1016/j.biortech.2020.124619] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/02/2020] [Revised: 12/22/2020] [Accepted: 12/23/2020] [Indexed: 06/12/2023]
Abstract
Apretreatment step forlignocelluloses is responsible to alter the complex structure which allows enhancingenzymatic accessibility and bioconversion of the materials.However, there is a gap on the methods to characterize physicalevolutions of the material throughout its pretreatment.The aim of this study is to evaluate the physical changes in rice straw (RS)pretreated with alkaline followed by grinding to produce biopowders.A hydro-textural approach was applied to evaluate the physical changes of RS pretreated byimpregnation and soaking in NaOH.The results indicated that the volume deformation increased by 110%, whilethe energy consumptiondecreased by 11.3% compared to unpretreated RS.Moreover, the cellulose content and glucose were 66.8 and 212 mg/gRS obtained by RSsoaking. Thealkaline-mechanicalpretreatment was shown asan effective process to providehigh glucosereadily converted to bioethanol.Additionally, the hydro-textural approach can be considered an alternative method for biomass structural characterization.
Collapse
Affiliation(s)
- Santi Chuetor
- Department of Chemical Engineering, Faculty of Engineering, King Mongkut's University of Technology North Bangkok, Bangkok, Thailand.
| | - Thierry Ruiz
- QualiSud, University Montpellier, CIRAD, Montpellier Supagro, Montpellier, France
| | - Abdellatif Barakat
- UMR IATE 1208 CIRAD/INRA/Montpellier SupAgro/Université Montpellier, 2 Place Pierre Viala, 34060 Montpellier Cedex 5, France
| | - Navadol Laosiripojana
- BIOTEC-JGSEE Integrative Biorefinery Laboratory, Innovation Cluster 2 Building, Thailand Science Park, Phaholyothin Road, Khlong Luang, Pathumthani, Thailand; Joint Graduate School for Energy and Environment, King Mongkut's University of Technology Thonburi, Bangmod, Bangkok, Thailand
| | - Verawat Champreda
- BIOTEC-JGSEE Integrative Biorefinery Laboratory, Innovation Cluster 2 Building, Thailand Science Park, Phaholyothin Road, Khlong Luang, Pathumthani, Thailand; Biorefinery and Bioproducts Research Group, National Center for Genetic Engineering and Biotechnology, Thailand Science Park, Pathumthani, Thailand
| | - Malinee Sriariyanun
- Department of Chemical and Process Engineering, The Sirindhorn International Thai German Graduate School of Engineering, King Mongkut's University of Technology North Bangkok, Bangkok, Thailand
| |
Collapse
|
14
|
Wang F, Shi D, Han J, Zhang G, Jiang X, Yang M, Wu Z, Fu C, Li Z, Xian M, Zhang H. Comparative Study on Pretreatment Processes for Different Utilization Purposes of Switchgrass. ACS OMEGA 2020; 5:21999-22007. [PMID: 32923758 PMCID: PMC7482092 DOI: 10.1021/acsomega.0c01047] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/08/2020] [Accepted: 08/11/2020] [Indexed: 05/19/2023]
Abstract
Switchgrass (Panicum virgatum, L., Poaceae) with the advantages of high cellulose yield, and high growth even under low input and poor soil quality, has been identified as a promising candidate for production of low-cost biofuels, papermaking, and nanocellulose. In this study, 12 chemical pretreatments on a laboratory scale were compared for different utilization purposes of switchgrass. It was found that the pretreated switchgrass with sodium hydroxide showed considerable potential for providing mixed sugars for fermentation with 11.10% of residual lignin, 53.85% of residual cellulose, and 22.06% of residual hemicellulose. The pretreatment with 2.00% (v/v) nitric acid was the best method to remove 78.37% of hemicellulose and 39.82% of lignin under a low temperature (125 °C, 30 min), which can be used in the production of nanocellulose. Besides, a completely randomized design analysis of switchgrass pretreatments provided the alternative ethanol organosolv delignification of switchgrass for the papermaking industry with a high residual cellulose of 58.56%. Finally, scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier-transform infrared spectroscopy (FT-IR) were carried out to confirm the changes in functional groups, crystallinity, and thermal behavior of the three materials, respectively, from the optimal pretreatments.
Collapse
Affiliation(s)
- Fan Wang
- Key
Laboratory of Biobased Materials, Qingdao Institute of Bioenergy and
Bioprocess Technology, Chinese Academy of
Sciences, 189 Songling Road, Qingdao, Shandong 266101, China
- Sino-Danish
College, University of Chinese Academy of
Sciences, 19(A) Yuquan
Road, Beijing 100049, China
| | - Dongxiang Shi
- Key
Laboratory of Biobased Materials, Qingdao Institute of Bioenergy and
Bioprocess Technology, Chinese Academy of
Sciences, 189 Songling Road, Qingdao, Shandong 266101, China
- Lanzhou
University of Technology, 287 Langongping Road, Lanzhou, Gansu 730050, China
| | - Ju Han
- Key
Laboratory of Biobased Materials, Qingdao Institute of Bioenergy and
Bioprocess Technology, Chinese Academy of
Sciences, 189 Songling Road, Qingdao, Shandong 266101, China
- Sino-Danish
College, University of Chinese Academy of
Sciences, 19(A) Yuquan
Road, Beijing 100049, China
| | - Ge Zhang
- Key
Laboratory of Biobased Materials, Qingdao Institute of Bioenergy and
Bioprocess Technology, Chinese Academy of
Sciences, 189 Songling Road, Qingdao, Shandong 266101, China
- Sino-Danish
College, University of Chinese Academy of
Sciences, 19(A) Yuquan
Road, Beijing 100049, China
| | - Xinglin Jiang
- The
Novo Nordisk Foundation Center for Biosustainability, Technical University of Denmark, Kemitorvet Building 220, Kongens Lyngby 2800, Denmark
| | - Mingjun Yang
- Lanzhou
University of Technology, 287 Langongping Road, Lanzhou, Gansu 730050, China
| | - Zhenying Wu
- Key
Laboratory of Biobased Materials, Qingdao Institute of Bioenergy and
Bioprocess Technology, Chinese Academy of
Sciences, 189 Songling Road, Qingdao, Shandong 266101, China
| | - Chunxiang Fu
- Key
Laboratory of Biobased Materials, Qingdao Institute of Bioenergy and
Bioprocess Technology, Chinese Academy of
Sciences, 189 Songling Road, Qingdao, Shandong 266101, China
| | - Zhihao Li
- Key
Laboratory of Biobased Materials, Qingdao Institute of Bioenergy and
Bioprocess Technology, Chinese Academy of
Sciences, 189 Songling Road, Qingdao, Shandong 266101, China
| | - Mo Xian
- Key
Laboratory of Biobased Materials, Qingdao Institute of Bioenergy and
Bioprocess Technology, Chinese Academy of
Sciences, 189 Songling Road, Qingdao, Shandong 266101, China
- Sino-Danish
College, University of Chinese Academy of
Sciences, 19(A) Yuquan
Road, Beijing 100049, China
| | - Haibo Zhang
- Key
Laboratory of Biobased Materials, Qingdao Institute of Bioenergy and
Bioprocess Technology, Chinese Academy of
Sciences, 189 Songling Road, Qingdao, Shandong 266101, China
- Sino-Danish
College, University of Chinese Academy of
Sciences, 19(A) Yuquan
Road, Beijing 100049, China
- . Phone: +86 139 6978 0438
| |
Collapse
|
15
|
Bilal M, Iqbal HMN. Recent Advancements in the Life Cycle Analysis of Lignocellulosic Biomass. ACTA ACUST UNITED AC 2020. [DOI: 10.1007/s40518-020-00153-5] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/08/2023]
|
16
|
Sewsynker-Sukai Y, Naomi David A, Gueguim Kana EB. Recent developments in the application of kraft pulping alkaline chemicals for lignocellulosic pretreatment: Potential beneficiation of green liquor dregs waste. BIORESOURCE TECHNOLOGY 2020; 306:123225. [PMID: 32241680 DOI: 10.1016/j.biortech.2020.123225] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/24/2020] [Revised: 03/16/2020] [Accepted: 03/17/2020] [Indexed: 05/24/2023]
Abstract
Lignocellulosic waste has offered a cost-effective and food security-wise substrate for the generation of biofuels and value-added products. However, its recalcitrant properties necessitate pretreatment. Of the various pretreatment methods, alkaline techniques have gained prominence as efficient catalysts. The kraft pulping industry represents a major hub for the generation of white, black and green liquor alkaline solutions during the paper making process. Despite its well-known significance in the kraft pulping process, green liquor (GL) has been widely applied for lignocellulosic pretreatment. Recently, green liquor dregs (GLD), an alkaline waste generated from the kraft pulping industry has piqued interest. Therefore, this review outlines the general flow of the kraft pulping process and the alkaline chemicals derived. In addition, the extensively studied GL for lignocellulosic pretreatment is discussed. Subsequently, the potential beneficiation of GLD for lignocellulosic pretreatment is presented. Furthermore, the challenges and prospects of lignocellulosic pretreatments are highlighted.
Collapse
Affiliation(s)
- Yeshona Sewsynker-Sukai
- University of KwaZulu-Natal, School of Life Sciences, Pietermaritzburg, South Africa; SMRI/NRF SARChI Research Chair in Sugarcane Biorefining, Discipline of Chemical Engineering, University of KwaZulu-Natal, Durban, South Africa.
| | - Anthea Naomi David
- University of KwaZulu-Natal, School of Life Sciences, Pietermaritzburg, South Africa
| | - E B Gueguim Kana
- University of KwaZulu-Natal, School of Life Sciences, Pietermaritzburg, South Africa
| |
Collapse
|
17
|
Rebello S, Anoopkumar AN, Aneesh EM, Sindhu R, Binod P, Pandey A. Sustainability and life cycle assessments of lignocellulosic and algal pretreatments. BIORESOURCE TECHNOLOGY 2020; 301:122678. [PMID: 31982298 DOI: 10.1016/j.biortech.2019.122678] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/31/2019] [Revised: 12/17/2019] [Accepted: 12/22/2019] [Indexed: 06/10/2023]
Abstract
Bioenergy and Bioproducts have gained augmented relevance in the wake of depleting fossil fuels and escalating environmental problems induced by anthropogenic activities. The paper outlays the various applications of biomass and their significance in various processes. The prospects of lignocelluloses and algal raw materials to biofuel production are well established; however the life cycle analysis of every bioprocess becomes essential for its technical feasibility. The paper mainly targets the life cycle analysis of various pretreatment strategies adopted in the generation of biofuels. Biomass pretreatment- accounts to a major cost contributory factor in the entire production process and thus the identification of alternate cost effective strategies is of much significance. The LCA analysis identifies biofuel superior to petroleum chemicals based on its environmental effects, however better results are expected to be achieved by depending on methods using solar based energy sources for limiting fossil fuels even in processes of biofuel production.
Collapse
Affiliation(s)
- Sharrel Rebello
- Communicable Disease Research Laboratory, St Joseph's College, Irinjalakuda, Kerala, India.
| | - A N Anoopkumar
- Communicable Disease Research Laboratory, St Joseph's College, Irinjalakuda, Kerala, India; Department of Zoology, Christ College, Irinjalakuda, University of Calicut, Kerala, India
| | | | - Raveendran Sindhu
- Microbial Processes and Technology Division, CSIR-National Institute of Interdisciplinary Science and Technology (CSIR-NIIST), Trivandrum 695 019, India
| | - Parameswaran Binod
- Microbial Processes and Technology Division, CSIR-National Institute of Interdisciplinary Science and Technology (CSIR-NIIST), Trivandrum 695 019, India
| | - Ashok Pandey
- Centre for Innovation and Translational Research, CSIR- Indian Institute of Toxicology Research (CSIR-IITR), 31 MG Marg, Lucknow 226 001, India
| |
Collapse
|