Improving enzymatic hydrolysis of acid-pretreated bamboo residues using amphiphilic surfactant derived from dehydroabietic acid

Synthesis of carboxylated cellulose nanocrystal/ZnO nanohybrids using Oxytenanthera abyssinica cellulose and zinc nitrate hexahydrate for radical scavenging, photocatalytic, and antibacterial activities

The extremely low antioxidant, photocatalytic, and antibacterial properties of cellulose limit its application in the biomedical and environmental sectors. To improve these properties, nanohybrides were prepared by mixing carboxylated cellulose nanocrystals (CCNCs) and zinc nitrate hexahydrate. Data from FTIR, XRD, DLS, and SEM spectra showed that, ZnO nanoparticles, with a size ranging from 94 to 351 nm and the smallest nanoparticle size of 164.18 nm, were loaded onto CCNCs. CCNCs/ZnO1 nanohybrids demonstrated superior antibacterial, photocatalytic, and antioxidant performance. More considerable antibacterial activity was shown with a zone of inhibition ranging from 26.00 ± 1.00 to 40.33 ± 2.08 mm and from 31.66 ± 3.51 to 41.33 ± 1.15 mm against Gram-positive and Gram-negative bacteria, respectively. Regarding photodegradation properties, the maximum value (∼91.52 %) of photocatalytic methylene blue degradation was observed after 75 min exposure to a UV lamp. At a concentration of 125.00 μm/ml of the CCNC/ZnO1 nanohybrids sample, 53.15 ± 1.03 % DPPH scavenging activity was obtained with an IC50 value of 117.66 μm/ml. A facile, cost-effective, one-step synthesis technique was applied to fabricate CCNCs/ZnO nanohybrids at mild temperature using Oxytenanthera abyssinica carboxylated cellulose nanocrystals as biotemplate. The result showed that CCNCs/ZnO nanohybrids possess potential applications in developing advanced functional materials for dye removal and antibacterial and antioxidant applications.

Exploitation of lignocellulosic-based biomass biorefinery: A critical review of renewable bioresource, sustainability and economic views

Urbanization has driven the demand for fossil fuels, however, the overly exploited resource has caused severe damage on environmental pollution. Biorefining using abundant lignocellulosic biomass is an emerging strategy to replace traditional fossil fuels. Value-added lignin biomass reduces the waste pollution in the environment and provides a green path of conversion to obtain renewable resources. The technology is designed to produce biofuels, biomaterials and value-added products from lignocellulosic biomass. In the biorefinery process, the pretreatment step is required to reduce the recalcitrant structure of lignocellulose biomass and improve the enzymatic digestion. There is still a gap in the full and deep understanding of the biorefinery process including the pretreatment process, thus it is necessary to provide optimized and adapted biorefinery solutions to cope with the conversion process in different biorefineries to further provide efficiency in industrial applications. Current research progress on value-added applications of lignocellulosic biomass still stagnates at the biofuel phase, and there is a lack of comprehensive discussion of emerging potential applications. This review article explores the advantages, disadvantages and properties of pretreatment methods including physical, chemical, physico-chemical and biological pretreatment methods. Value-added bioproducts produced from lignocellulosic biomass were comprehensively evaluated in terms of encompassing biochemical products , cosmetics, pharmaceuticals, potent functional materials from cellulose and lignin, waste management alternatives, multifunctional carbon materials and eco-friendly products. This review article critically identifies research-related to sustainability of lignocellulosic biomass to promote the development of green chemistry and to facilitate the refinement of high-value, environmentally-friendly materials. In addition, to align commercialized practice of lignocellulosic biomass application towards the 21st century, this paper provides a comprehensive analysis of lignocellulosic biomass biorefining and the utilization of biorefinery green technologies is further analyzed as being considered sustainable, including having potential benefits in terms of environmental, economic and social impacts. This facilitates sustainability options for biorefinery processes by providing policy makers with intuitive evaluation and guidance.

Steam explosion as sustainable biomass pretreatment technique for biofuel production: Characteristics and challenges

The biorefining process of lignocellulosic biomass has recently emerged as one of the most profitable biofuel production options. However, pretreatment is required to improve the recalcitrant lignocellulose's enzymatic conversion efficiency. Among biomass pretreatment methods, the steam explosion is an eco-friendly, inexpensive, and effective approach to pretreating biomass, significantly promoting biofuel production efficiency and yield. This review paper critically presents the steam explosion's reaction mechanism and technological characteristics for lignocellulosic biomass pretreatment. Indeed, the principles of steam explosion technology for lignocellulosic biomass pretreatment were scrutinized. Moreover, the impacts of process factors on pretreatment efficiency and sugar recovery for the following biofuel production were also discussed in detail. Finally, the limitations and prospects of steam explosion pretreatment were mentioned. Generally, steam explosion technology applications could bring great potential in pretreating biomass, although deeper studies are needed to deploy this method on industrial scales.

The use of newly isolated fungal cultures for the selective delignification of bamboo culms

The screening of ligninolytic enzyme-producing fungal species in samples led to the identification of Paracremonium sp. LCB1, Clonostachys compactiuscula LCD1 and C. compactiuscula LCN1. Both these strains produced high levels of hemicellulase and ligninolytic enzyme production over a relatively short fermentation period of 3-5 days while exhibiting very low levels of cellulase activity. The results of the tests indicated that co-culturing LCB1 and LCN1 enhanced the ability to degrade lignin, and the ideal degrading circumstances and internal degrading mechanism of combined fungi were examined. The results showed that under conditions of temperature (30°C), pH (5), culture time (40 d), solid-liquid ratio (1:2.5), the pretreatment of bamboo culms with a co-culture of LCB1 and LCN1 resulted in a pronounced 76.37% drop in lignin weight and a high lignin/cellulose loss ratio (>10). Fourier transform infrared spectroscopy, X-ray diffractometry, and scanning electron microscopy were used to characterize the physicochemical properties of these bio-pretreated bamboo culms, further confirming that LCB1 and LCN1 co-culture represents an effective approach to bamboo delignification.

Surfactant-assisted ethylenediamine for the deconstruction and conversion of corn stover biomass

Lignocellulosic biomass is a promising feedstock to produce sustainable fuels and energy toward a green bioeconomy. A surfactant-assisted ethylenediamine (EDA) was developed for the deconstruction and conversion of corn stover in this study. The effects of surfactants on the whole conversion process of corn stover was also evaluated. The results showed that xylan recovery and lignin removal in solid fraction were significantly enhanced by surfactant-assisted EDA. The glucan and xylan recoveries in solid fraction reached 92.1% and 65.7%, respectively, while the lignin removal was 74.5% by sodium dodecyl sulfate (SDS)-assisted EDA. SDS-assisted EDA also improved the sugar conversion in 12 h enzymatic hydrolysis at low enzyme loadings. The ethanol production and glucose consumption of washed EDA pretreated corn stover in simultaneous saccharification and co-fermentation were improved with the addition of 0.001 g/mL SDS. Therefore, surfactant-assisted EDA showed the potential to improve the bioconversion performance of biomass.

Journey of lignin from a roadblock to bridge for lignocellulose biorefineries: A comprehensive review

The grave concerns arisen as a result of environmental pollution and diminishing fossil fuel reserves in the 21st century have shifted the focus on the use of sustainable and environment friendly alternative resources. Lignocellulosic biomass constituted by cellulose, hemicellulose and lignin is an abundantly available natural bioresource. Lignin, a natural biopolymer has over the years gained much importance as a high value material with commercial importance. The present review provides an in-depth knowledge on the journey of lignin from being considered a roadblock to a bridge connecting diverse industries with widescale applications. The successful valorization of lignin for the production of bio-based platform chemicals and fuels has been the subject of intensive investigation. A deeper understanding of lignin characteristics and factors governing the biomass conversion into valuable products can support improved biomass consumption. The components of lignocellulosic biomass might be totally transformed into a variety of value-added products with the improvements in bioprocess techniques that valorize lignin. In this review, the recent advances in the lignin extraction and depolymerization methods that may help in achieving the cost-economics of the bioprocess are summarized and compared. The industrial potential of lignin-derived products such as aromatics, biopolymers, biofuels and agrochemicals are also outlined. Additionally, assessment of the recent research trends in lignin valorization into value-added chemicals has been done and present scenario of technological-industrial applications of lignin with economic perspectives is highlighted.

Surfactants, Biosurfactants, and Non-Catalytic Proteins as Key Molecules to Enhance Enzymatic Hydrolysis of Lignocellulosic Biomass

Lignocellulosic biomass (LCB) has remained a latent alternative resource to be the main substitute for oil and its derivatives in a biorefinery concept. However, its complex structure and the underdeveloped technologies for its large-scale processing keep it in a state of constant study trying to establish a consolidated process. In intensive processes, enzymes have been shown to be important molecules for the fractionation and conversion of LCB into biofuels and high-value-added molecules. However, operational challenges must be overcome before enzyme technology can be the main resource for obtaining second-generation sugars. The use of additives is shown to be a suitable strategy to improve the saccharification process. This review describes the mechanisms, roles, and effects of using additives, such as surfactants, biosurfactants, and non-catalytic proteins, separately and integrated into the enzymatic hydrolysis process of lignocellulosic biomass. In doing so, it provides a technical background in which operational biomass processing hurdles such as solids and enzymatic loadings, pretreatment burdens, and the unproductive adsorption phenomenon can be addressed.

Improve Enzymatic Hydrolysis of Lignocellulosic Biomass by Modifying Lignin Structure via Sulfite Pretreatment and Using Lignin Blockers

Even traditional pretreatments can partially remove or degrade lignin and hemicellulose from lignocellulosic biomass for enhancing its enzymatic digestibility, the remaining lignin in pretreated biomass still restricts its enzymatic hydrolysis by limiting cellulose accessibility and lignin-enzyme nonproductive interaction. Therefore, many pretreatments that can modify lignin structure in a unique way and approaches to block the lignin’s adverse impact have been proposed to directly improve the enzymatic digestibility of pretreated biomass. In this review, recent development in sulfite pretreatment that can transform the native lignin into lignosulfonate and subsequently enhance saccharification of pretreated biomass under certain conditions was summarized. In addition, we also reviewed the approaches of the addition of reactive agents to block the lignin’s reactive sites and limit the cellulase-enzyme adsorption during hydrolysis. It is our hope that this summary can provide a guideline for workers engaged in biorefining for the goal of reaching high enzymatic digestibility of lignocellulose.

Revealing the mechanism of surfactant-promoted enzymatic hydrolysis of dilute acid pretreated bamboo

To improve the enzymatic digestibility of dilute acid pretreated bamboo residue (DABR), surfactants including PEG 4000 and Tween 80 were added to prevent the non-productive adsorption between residual lignin and enzyme. At the optimal loadings (e.g., 0.2 and 0.3 g surfactant/g lignin), the enzymatic digestibility of DABR improved from 29.4% to 64.6% and 61.6% for PEG 4000 and Tween 80, respectively. Furthermore, the promoting mechanism of these surfactants on enzymatic hydrolysis was investigated by real-time surface plasmon resonance (SPR) and fluorescence spectroscopy. Results from SPR analysis showed that Tween 80 outperformed PEG 4000 in terms of dissociating the irreversible cellulase adsorption onto lignin. Fluorescence quenching mechanism revealed that PEG 4000 and Tween 80 intervened the interaction between lignin and cellulase by hydrogen bonds/Van der Waals and hydrophobic action, respectively. This work provided an in-depth understanding of the mechanisms of PEG 4000 and Tween 80 on enhancing the enzymatic hydrolysis efficiency.

A structure-activity understanding of the interaction between lignin and various cellulase domains

To elucidate the structure-activity relationship between lignin and various cellulase domains, four lignin fractions with specific structures and molecular weight were prepared from bamboo kraft lignin (BKL) and used to investigate the adsorption mechanism between different cellulase domains by fluorescence spectroscopy and SDS-PAGE. Endo-cellulase 6B exhibited a higher affinity to BKL fractions than the carbohydrate-binding module (CBM4A) of cellulase, which is positively correlated to molecular weight. The thermodynamic mechanism showed that the adsorption between BKL fractions and endo-cellulase 6B was dominated by van der Waals and electrostatic forces, while hydrophobic force is the driver for BKL fractions to adsorb CBM4A. Structure-activity relationship between lignin fractions and cellulase domain revealed that thermodynamics and interaction forces were more easily affected by the structure of BKL, including S/G ratio, molecular weight and hydrophobicity. The aforementioned results demonstrated that lignin's structure plays a critical role in its adsorption with various cellulase domains.

Surfactants in biorefineries: Role, challenges & perspectives

The use of lignocellulosic biomass (LCB) as feedstock has received increasing attention as an alternative to fossil-based refineries. Initial steps such as pretreatment and enzymatic hydrolysis are essential to breakdown the complex structure of LCB to make the sugar molecules available to obtain bioproducts by fermentation. However, these steps increase the cost of the bioproduct and often reduces its competitiveness against synthetic products. Currently, the use of surfactants has shown considerable potential to enhance lignocellulosic biomass processing. This review addresses the main mechanisms and role of surfactants as key molecules in various steps of biorefinery processes, viz., increasing the removal of lignin and hemicellulose during the pretreatments, increasing enzymatic stability and enhancing the accessibility of enzymes to the polymeric fractions, and improving the downstream process during fermentation. Further, technical advances, challenges in application of surfactants, and future perspectives to augment the production of several high value-added bioproducts have been discussed.

Synthesis, Aggregation Behavior and Drug-binding Interactions of Fatty acid-imidazolium-based Surface-active Ionic Liquids

The renewable fatty acid-based surface-active ionic liquids (SAILs) containing ethyl-substituted imidazolium head groups were prepared and structurally analyzed by Fourier transform infrared spectroscopy (FTIR), ¹HNMR and ¹³CNMR spectroscopy. The products were named as; 3-ethyl-1-(2-dodecanoyl oxy) ethylimidazolium bromide [C₁₂Eeim]Br, 3-ethyl-1-(2-tetradecanoyl oxy) ethylimidazolium bromide [C₁₄Eeim]Br and 3-ethyl-1-(2-hexadecanoyl oxy) ethylimidazolium bromide [C₁₆Eeim]Br. The critical micelle concentration (cmc) values of the three SAILs have been evaluated using conductivity measurements, probe-less UV-visible spectroscopy and fluorescence spectroscopy. The obtained cmc values were compared with the earlier reported non-functionalized SAILs such as [C_nmim]Br and [C_neim]Br where n= 12, 14, 16. The values were found to be 3 to 9 times lower mainly due to the presence of ester chain and also ethyl substituted imidazole ring. Thermodynamic parameters were evaluated by conductivity data at three different temperatures. Further, the aggregation behavior of SAILs with anesthetic drug, lidocaine hydrochloride (LC) has been studied using fluorescence. The fluorescence and UV-visible studies showed strong synergistic interactions operating between SAILs and drug molecules involving H bonding and cation-π interactions. The interactions grew stronger with the elongation of SAIL-chain length (12C-16C). Dynamic light scattering (DLS) and transmission electron microscopy (TEM) measurements suggested the formation of vesicles in SAIL-LC mixtures. These studies may thus offer an effective candidate which would serve as vectors for drug molecules in terms of their enhanced solubilization, permeability and target-specific delivery.

Pretreatment Affects Profits From Xylanase During Enzymatic Saccharification of Corn Stover Through Changing the Interaction Between Lignin and Xylanase Protein

Effective pretreatment is vital to improve the biomass conversion efficiency, which often requires the addition of xylanase as an accessory enzyme to enhance enzymatic saccharification of corn stover. In this study, we investigated the effect of two sophisticated pretreatment methods including ammonium sulfite (AS) and steam explosion (SE) on the xylanase profits involved in enzymatic hydrolysis of corn stover. We further explored the interactions between lignin and xylanase Xyn10A protein. Our results showed that the conversion rates of glucan and xylan in corn stover by AS pretreatment were higher by Xyn10A supplementation than that by SE pretreatment. Compared with the lignin from SE pretreated corn stover, the lignin from AS pretreated corn stover had a lower Xyn10A initial adsorption velocity (13.56 vs. 10.89 mg g⁻¹ min⁻¹) and adsorption capacity (49.46 vs. 27.42 mg g⁻¹ of lignin) and weakened binding strength (310.6 vs. 215.9 L g⁻¹). Our study demonstrated the low absolute zeta potential and strong hydrophilicity of the lignin may partly account for relative weak interaction between xylanase protein and lignin from AS pretreated corn stover. In conclusion, our results suggested that AS pretreatment weakened the inhibition of lignin to enzyme, promoted the enzymatic hydrolysis of corn stover, and decreased the cost of enzyme in bioconversion.

The Kinetics Studies on Hydrolysis of Hemicellulose

The kinetics studies is of great importance for the understanding of the mechanism of hemicellulose pyrolysis and expanding the applications of hemicellulose. In the past years, rapid progress has been paid on the kinetics studies of hemicellulose hydrolysis. In this article, we first introduced the hydrolysis of hemicelluloses via various strategies such as autohydrolysis, dilute acid hydrolysis, catalytic hydrolysis, and enzymatic hydrolysis. Then, the history of kinetic models during hemicellulose hydrolysis was summarized. Special attention was paid to the oligosaccharides as intermediates or substrates, acid as catalyst, and thermogravimetric as analyzer method during the hemicellulose hydrolysis. Furthermore, the problems and suggestions of kinetic models during hemicellulose hydrolysis was provided. It expected that this article will favor the understanding of the mechanism of hemicellulose pyrolysis.

High solid loading enzymatic hydrolysis of acetic acid-peroxide/acetic acid pretreated poplar and cellulase recycling

High solid loading saccharification is the premise of preparing high-concentration sugar which is beneficial to bioethanol production, but the limited sugar concentration and high enzyme dosage are two challenges. In this work, the glucan-rich acetic acid-hydrogen peroxide/acetic acid (AC-HPAC)-pretreated poplar (85.8%) were prepared for enzymatic hydrolysis at 10%-40% solid loading and the strategies for reducing cellulase dosage were explored. Results showed that the maximum glucose concentration reached to 250.8 g/L at 40% solid loading, which was the highest concentration in previous literatures. As the solid loading was 20%, the addition of Tween 80 saved 50% of cellulase and the recycling of unhydrolyzed residue (0.2 g/g DM) saved another 25% of cellulase, resulting in 152.2 g/L of glucose concentration with yield of 79.9%. This work showed potential of poplar to produce the high concentration glucose solution with low enzyme loading through the recycling of enzyme bound onto unhydrolyzed residue.

Application of surfactants in papermaking industry and future development trend of green surfactants

In this work, the application of chemical surfactants, including cooking aids, detergents, surface sizing agents, and deinking agents as core components, is introduced in the wet end of pulping and papermaking. This method for the combined application of enzymes and surfactants has expanded, promoting technological updates and improving the effect of surfactants in practical applications. Finally, the potential substitution of green surfactants for chemical surfactants is discussed. The source, classification, and natural functions of green surfactants are introduced, including plant extracts, biobased surfactants, fermentation products, and woody biomass. These green surfactants have advantages over their chemically synthesized counterparts, such as their low toxicity and biodegradability. This article reviews the latest developments in the application of surfactants in different paper industry processes and extends the methods of use. Additionally, the application potential of green surfactants in the field of papermaking is discussed. KEY POINTS: • Surfactants as important chemical additives in papermaking process are reviewed. • Deinking technologies by combined of surfactants and enzymes are reviewed. • Applications of green surfactant in papermaking industry are prospected.

Interplays of enzyme, substrate, and surfactant on hydrolysis of native lignocellulosic biomass

Tracking enzyme, substrate, and surfactant interactions to reach maximum reducing sugar production during enzymatic hydrolysis of plant biomass may provide a better understanding of factors that limit the lignocellulosic material degradation in native rice straw. In this study, enzymes (Cellic Ctec2 cellulase and Cellic Htec2 xylanase) and Triton X-100 (surfactant) were used as biocatalysts for cellulose and xylan degradation and as a lignin blocking agent, respectively. The response surface model (R² = 0.99 and R²-adj = 0.97) indicated that Cellic Ctec2 cellulase (p < 0.0001) had significant impacts on reducing sugar production, whereas Cellic Htec2 xylanase and Triton X-100 had insignificant impacts on sugar yield. Although FTIR analysis suggested binding of Triton X-100 to lignin surfaces, the morphological observation by SEM revealed similar surface features (i.e., smooth surfaces with some pores) of rice straw irrespective of Triton X-100. The reducing sugar yields from substrate hydrolysis with or without the surfactant were comparable, suggesting similar exposure of polysaccharides accessible to the enzymes. The model analysis and chemical and structural evidence suggest that there would be no positive effects on enzymatic hydrolysis by blocking lignins with Triton X-100 if high lignin coverage exists in the substrate due to the limited availability of hydrolyzable polysaccharides.

Factors Affecting the Catalytic Efficiency and Synergism of Xylanase and Cellulase During Enzymatic Hydrolysis of Birch Wood

Understanding factors that affect the catalytic efficiency and synergism of enzymes is helpful to enhance the process of bioconversion. In this study, birch wood (BW) was sequentially treated by delignification (DL), deacetylation (DA), and decrystallization (DC) treatments. The physiochemical structures of treated BW were characterized. Moreover, the influences of sequential treatments on the catalytic efficiency and synergism of xylanase and cellulase were studied. DL treatments efficiently improved the conversion of cellulose and xylan. A high degree of synergy (DS) between xylanase and cellulase was produced during hydrolysis of DL-treated BW. DA treatments enhanced xylan conversion but reduced the DS between xylanase and cellulase for xylan hydrolysis, whereas DC treatments enhanced cellulose conversion but reduced the DS between xylanase and cellulase for cellulose hydrolysis. The cellulose conversion of lithium chloride/N,N-dimethylacetamide (LiCl/DMAc)-treated BW (89.69%) was higher than the cellulose conversion of ball milling (BM)-treated BW (81.63%), whereas the xylan conversion of LiCl/DMAc-treated BW (83.77%) was lower than the xylan conversion of BM-treated BW (87.21%). This study showed that the catalytic efficiency and synergism of xylanase and cellulase are markedly affected by lignin hindrance, hemicellulose acetylation, and cellulose crystallization.

Extraction of sugarcane bagasse arabinoxylan, integrated with enzymatic production of xylo-oligosaccharides and separation of cellulose

Sugarcane processing roughly generates 54 million tonnes sugarcane bagasse (SCB)/year, making SCB an important material for upgrading to value-added molecules. In this study, an integrated scheme was developed for separating xylan, lignin and cellulose, followed by production of xylo-oligosaccharides (XOS) from SCB. Xylan extraction conditions were screened in: (1) single extractions in NaOH (0.25, 0.5, or 1 M), 121 °C (1 bar), 30 and 60 min; (2) 3 × repeated extraction cycles in NaOH (1 or 2 M), 121 °C (1 bar), 30 and 60 min or (3) pressurized liquid extractions (PLE), 100 bar, at low alkalinity (0-0.1 M NaOH) in the time and temperature range 10-30 min and 50-150 °C. Higher concentration of alkali (2 M NaOH) increased the xylan yield and resulted in higher apparent molecular weight of the xylan polymer (212 kDa using 1 and 2 M NaOH, vs 47 kDa using 0.5 M NaOH), but decreased the substituent sugar content. Repeated extraction at 2 M NaOH, 121 °C, 60 min solubilized both xylan (85.6% of the SCB xylan), and lignin (84.1% of the lignin), and left cellulose of high purity (95.8%) in the residuals. Solubilized xylan was separated from lignin by precipitation, and a polymer with β-1,4-linked xylose backbone substituted by arabinose and glucuronic acids was confirmed by FT-IR and monosaccharide analysis. XOS yield in subsequent hydrolysis by endo-xylanases (from glycoside hydrolase family 10 or 11) was dependent on extraction conditions, and was highest using xylan extracted by 0.5 M NaOH, (42.3%, using Xyn10A from Bacillus halodurans), with xylobiose and xylotriose as main products. The present study shows successful separation of SCB xylan, lignin, and cellulose. High concentration of alkali, resulted in xylan with lower degree of substitution (especially reduced arabinosylation), while high pressure (using PLE), released more lignin than xylan. Enzymatic hydrolysis was more efficient using xylan extracted at lower alkaline strength and less efficient using xylan obtained by PLE and 2 M NaOH, which may be a consequence of polymer aggregation, via remaining lignin interactions.

Chemo-enzymatic approaches for consolidated bioconversion of Saccharum spontaneum biomass to ethanol-biofuel

A novel strategy involving sodium dodecylsulfate (SDS) (SDS assisted tris (2-hydroxyethyl) methyl- ammonium methyl sulphate ([TMA][MeSO₄], ionic liquid) pretreatment of Saccharum spontaneum biomass (SSB) following its enzymatic saccharification, and conversion into ethanol-biofuel in a consolidated bioprocess (CBP) was developed. Ionic liquid stable enzyme preparation developed from Bacillus subtilis G₂ was used for saccharification. Optimized pretreatment and saccharification variables enhanced the sugar yield (2.35-fold), which was fermented to ethanol content of 104.42 mg/g biomass with an efficiency of 35.73%. The pretreated biomass was examined for textural/ultrastructural alterations by scanning electron microscopy (SEM), ¹H/¹³C nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), surface area measurements, water retention value, and cellulase adsorption isotherms. The combined [TMA][MeSO₄] and SDS pretreatment disrupted the lignocellulosic microfibrils, and increased the porosity and surface area. The study provides new mechanistic insights on combined IL and surfactant pretreatment of biomass for its efficient conversion to biofuel.

Sustainable preparation of bifunctional cellulose nanocrystals via mixed H2SO4/formic acid hydrolysis

In this work, a sustainable and highly efficient approach for preparing bifunctional cellulose nanocrystals (CNCs) was proposed through a mixed acid system of sulfuric acid and formic acid (FA). It was found that low-concentration (5-10 wt%) sulfuric acid can significantly improve the hydrolysis efficiency of FA (65-80 wt%), which enabled the highly efficient preparation of CNCs, i.e., the maximum yield of CNCs reached up to 70.65%. The obtained CNCs exhibited a rod-like shape with high crystallinity, and good dispersibility in both water and some organic phases. Moreover, the as-prepared CNCs exhibited high thermal stability, which is much higher than that of the traditionally sulfuric acid hydrolyzed ones. In addition, it was demonstrated that the bifunctional CNCs were able to stabilize various oils to form stable Pickering emulsion gels. Thus, this work provides a promising approach for sustainable preparation of bifunctional CNCs, which may find high-end applications in diverse fields.

Using the Major Components (Cellulose, Hemicellulose, and Lignin) of Phyllostachys praecox Bamboo Shoot as Dietary Fiber

Bamboo shoots are a renewable and abundant biomass containing cellulose, hemicellulose, and lignin. Although many studies have explored the applications of each of these components in the preparation of biochemicals and biopolymers, few studies have evaluated the utility of these components as a dietary fiber supplement. In this study, a powder consisting of the main components of bamboo shoots (cellulose, hemicellulose, and lignin) was prepared from fresh Phyllostachys praecox shoots and characterized by scanning electron microscopy, infrared spectroscopy, and X-ray diffraction. To evaluate the potential utility of these components as a dietary fiber supplement, we conducted an experiment in which this powder was supplemented in the diet of mice for 7 weeks. The experiment included three diet groups (n = 10/group): a low-fat control diet (LFC), high-fat diet (HFD), and high-fat diet with bamboo shoot powder (HFBSP). Compared with HFD mice, the body weights of LFC and HFBSP mice were lower, indicating that the addition of bamboo shoot powder could reduce the weight gain associated with the HFD. Bamboo shoot powder supplementation could also reduce the levels of triglycerides (TG), blood glucose (GLU), total cholesterol (CHOL), high-density lipoprotein (HDL-C), and low-density lipoprotein (LDL-C) in HFD mice. The fat histology images indicated that obesity was alleviated in HFBSP mice, and the liver histology images indicated that the addition of bamboo shoot powder to the HFD could reduce the risk of fatty liver disease. The addition of bamboo shoot powder to the HFD might also improve the gut microbiota of mice. Thus, the major components of bamboo shoot powder (cellulose, hemicellulose, and lignin) could be used as beneficial natural additives in the food industry.

Valorization of Enzymatic Hydrolysis Residues from Corncob into Lignin-Containing Cellulose Nanofibrils and Lignin Nanoparticles

As a kind of biomass waste, enzymatic hydrolysis residues (EHRs) are conventionally burned or just discarded, resulting in environmental pollution and low economic benefits. In this study, EHRs of corncob residues (CCR) were used to produce high lignin-containing cellulose nanofibrils (LCNFs) and lignin nanoparticles (LNPs) through a facile approach. The LCNFs and LNPs with controllable chemical compositions and properties were produced by tuning the enzymolysis time of CCR and the followed homogenization. The morphology, thermal stability, chemical and crystalline structure, and dispersibility of the resultant LCNFs and LNPs were further comprehensively investigated. This work not only promotes the production of lignocellulose-based nanomaterials but also provides a promising utilization pathway for EHRs.

Ethylene glycol based acid pretreatment of corn stover for cellulose enzymatic hydrolysis

A highly efficient pretreatment strategy using ethylene glycol with dilute sulfuric acid was developed for the fractionation of lignocellulose. The pretreatment behaviors were related to the composition analysis and structure of the samples analyzed by SEM, XRD, FTIR and 2D HSQC NMR, resulting in 80.3% delignification and 84.7% retention of cellulose under the selected conditions (120 °C, 60 min, and 0.6 wt% H2SO4 (w/w)). The enzymatic hydrolysis sugar yield significantly increased from 24.1 to 70.6% (3 FPU g-1), which displayed immense improvement compared with untreated corn stover (24.1%), nearly 3-fold higher than its untreated counterparts. Besides, the regenerated lignin could be fitted to valorize renewable aromatic chemicals and alkane fuels. The present study shows that the pretreatment is a simple, efficient and promising process for corn stover biorefinery.

Enhancing the enzymatic digestibility of bamboo residues by biphasic phenoxyethanol-acid pretreatment

The high content of lignin in bamboo is considered as the major obstacle for its biorefining. In this work, a green, lignin-selective, and recyclable solvent of phenoxyethanol was coupled with acid solution to deconstruct recalcitrant structure of bamboo residues (BR) to boost its enzymatic digestibility. Results showed phenoxyethanol has excellent lignin-removal ability from 29.4% to 91.6% when phenoxyethanol:acid ratios increased from 0:1 to 4:1 at 120 °C. 82.5%-87.8% of cellulose was preserved in pretreated BR. The enzymatic digestibility of BR significantly improved from 20.0% to 91.3% when it was pretreated under optimized conditions. With lower enzyme dosages (10 FPU/g) and 5 recycled using of pretreatment liquor, pretreated BR still showed a good enzymatic digestibility of 67.4%-93.7% and 67.1-76.8%, respectively. Examination of physicochemical changes revealed that improvements to accessibility, reduction of crystallite size, decrease of surface lignin and hydrophobicity for pretreated BR showed positive correlations (R² > 0.7) with their enzymatic digestibility.

Effect of sulfuric acid on production of xylooligosaccharides and monosaccharides from hydrogen peroxide-acetic acid-pretreated poplar

Lignin is one of the main obstacles for enzymatic hydrolysis, which can be selectively removed by hydrogen peroxide-acetic acid pretreatment (HPAC). In this work, the effects of sulfuric acid concentration on chemical composition, structural features, physical properties and enzymatic digestibility of HPAC pretreated poplar were investigated. The increased H₂SO₄ dosage enhanced the lignin removal of HPAC-pretreated poplar, resulting in the increased accessibility and decreased hydrophobicity. A satisfying glucose yield (91.84%) was obtained from HPAC pretreated poplar (100 mM H₂SO₄) at 5 FPU/g DM of cellulase loading with the addition of xylanase (30 U/g DM) and Tween 80 (3 g/L). The increment of H₂SO₄ concentration promoted the yield of xylooligosaccharides from 0.69% to 20.45% and monosaccharides from 5.76% to 92.89% respectively by two-step enzymatic hydrolysis. This work demonstrated that HPAC pretreatment played a critical role in efficient utilization of poplar carbohydrates by enzymatic hydrolysis.

Comprehensive understanding of the effects of metallic cations on enzymatic hydrolysis of humic acid-pretreated waste wheat straw

BACKGROUND

Humic acids (HA) have been used in biorefinery process due to its surfactant properties as an aid to the pretreatment of lignocellulose, with results indicating a positive effect on delignification. However, the HA remaining on the surface of the pretreated lignocellulose has also been shown to provide a negative effect on ensuing enzymatic digestibility. Hence, a strategy of complexing metallic cations with HA prior to enzymatic hydrolysis was proposed and demonstrated in this work in an effort to provide a means of HA mitigation that does not involve significant water consumption via extensive washing.

RESULTS

Results showed that the enzymatic hydrolysis efficiency of waste wheat straw decreased from 81.9% to 66.1% when it was pretreated by 10 g/L HA, attributed to the inhibition ability of the residual HA on enzyme activity of cellulase with a debasement of 36.3%. Interestingly, enzymatic hydrolysis efficiency could be increased from 66.1% to 77.3% when 10 mM Fe³⁺ was introduced to the system and allowed to associate with HA during saccharification.

CONCLUSIONS

The addition of high-priced metallic cations (Fe³⁺) has successfully alleviated the effect of HA on cellulase activity. It is our hope in demonstrating the complexation affinity between metallic cations and HA, future researchers and biorefinery developers will evaluate this strategy as a unit operation that could allow economic biorefining of WWS to produce valuable biochemicals, biofuels, and biomaterials.

Evaluating the bio-application of biomacromolecule of lignin-carbohydrate complexes (LCC) from wheat straw in bone metabolism via ROS scavenging

Lignin-carbohydrate complexes (LCC) arebiomacromolecules that can be obtained from different biomass. Even some works have shown the LCC can efficiently scavenge the intracellular and endogenous reactive oxygen species (ROS), while little work has been carried out to investigate the potential application of LCC for ROS-related treatment in biological filed, especially for the treatment of periprosthetic osteolysis in vivo. In this work, Lignin-rich (LCC-A) and carbohydrate-rich (LCC-B) fractions in wheat straw are isolated and used as the ROS scavenger to promote osteoblast differentiation and inhibit osteoclast differentiation. The chemical composition and structures are characterized by high performance anion exchange chromatography (HPAEC) and nuclear magnetic resonance (NMR) technologies (quantitative ¹³C NMR and 2D-HSQC NMR), respectively. The results showed LCC-A possesses higher in vitro ROS-scavenging ability than LCC-B (89.8% vs 57.8%) and to inhibit osteoclast differentiation, whereas LCC-B more significantly activates cellular antioxidant activities via the KEAP1-NRF2-ARE pathway (218.5% vs 438.0% in the level of HO-1), thus promoting osteoblast differentiation in an inflammatory environment. Moreover, the therapeutic administration of LCC-A and LCC-B for Ti-particle-induced osteolytic murine calvariae showed both of them positively regulate and restore the bone metabolism, while preventing calvaria impairment. Hence, LCC from wheat straw exhibits efficient bone protective effects, suggesting it may be used as the promising ROS scavenger for clinical treatment of periprosthetic osteolysis.

Effect of emerging pollutant fluoxetine on the excess sludge anaerobic digestion

Fluoxetine (FLX), an emerging pollutant, has been detected in the sewage and excess sludge (ES) at substantial levels. So far, however, the impacts of FLX on the ES anaerobic digestion and the related mechanisms have never been investigated. In this work, the effects of FLX on the ES anaerobic digestion were explored by the batch test under moderate temperature condition. The results indicated the effect of FLX on ES digestion was dose-dependent. When FLX was at a low dose (0.1 mg/kg), FLX had no significant impact on the methane generation from the ES digestion. However，when FLX was 2.0 mg/kg, the cumulative methane production was only 91.2 ± 4.3 mL/g volatile suspended solids (VSS), which was about 59.9 ± 3.4% of the blank (without FLX). Mechanisms revealed that the presence of FLX has inhibited hydrolysis, acidification and methanogenesis. Enzyme activity analysis showed that FLX inhibited the activities of key enzymes in the process of hydrolysis, acidification and methanogenesis. The results of this work are of great significance to explain the role of FLX in the process of ES fermentation, and provide some reference for the subsequent utilization of ES.

Efficient enzymatic saccharification of alkaline and ionic liquid-pretreated bamboo by highly active extremozymes produced by the co-culture of two halophilic fungi

Herein, we studied two strains of halophilic fungi (Aspergillus flavus and Aspergillus penicillioides) as potential potent sources of hydrolases under solid-state fermentation conditions. We found that the co-culture of these two fungal species was associated with maximal CMCase, FPase, xylanase, and β-xylosidase activity under optimized fermentation conditions. These enzymes functioned optimally at pH values from 9.0 to 10.0, at temperatures from 50 °C to 60 °C, and in the presence of 15-20% NaCl. These enzymes were also stable in metal salt solutions and the presence of ionic liquids. Reducing sugar yields following the cellulase-hemicellulase co-treatment of untreated, alkaline-pretreated, and ionic liquid-pretreated bamboo were higher than those associated with separate cellulase and hemicellulase treatments, thus confirming the synergistic activity of cellulase-hemicellulase co-treatment in the context of bamboo saccharification. These results indicate that these two fungi are promising hydrolase producers that can facilitate the bioconversion of bamboo biomass.

High temperature treatment of hemicellulose in pulp-impregnated effluent improves the pre-hydrolysis efficiency

At 121 °C, the heat transfer effect and the movement of H₃O⁺ are improved, thus the pre-hydrolysis is accelerated.

Falling Leaves Return to Their Roots: A Review on the Preparation of γ-Valerolactone from Lignocellulose and Its Application in the Conversion of Lignocellulose

γ-Valerolactone (GVL), derived from renewable lignocellulosic biomass, has been considered as a cost-competitive and green platform chemical. With the increasingly prominent environmental problems, a deep understanding of the preparation and transformation of GVL is highly needed. Based on the latest progress made with GVL, preparation and applications of GVL are summarized and discussed in this Review. In particular, the state-of-the-art in catalytic production of GVL is described based on the use of noble-metal and non-noble-metal catalysts. The application of GVL for the valorization of lignocellulose would improve the yield of target products such as sugar monomers and furfural. Thus, GVL can be produced from lignocellulose and simultaneously it can also be used for the valorization of lignocellulose, just as in the sustainable and renewable cycle, "the falling leaves returns to their roots". This Review is expected to provide valuable reference and new proposal for the further development and better utilization of GVL.

Improving β-glucosidase and xylanase production in a combination of waste substrate from domestic wastewater treatment system and agriculture residues

Cellulase and hemicellulase activities are considered to the major bottlenecks in the lignocellulosic biorefinery process, especially in an enzyme cocktail lacking β-glucosidase (BGL) and xylanase (XYL). In view of this issue, higher levels of BGL and XYL activities were obtained in the presence of wastewater and activated sludge as an induction medium mixed with 5% of rice straw by Hypocrea sp. W₆₃. The analysis of the ionic content showed that a relatively low sludge dose could enhance the production of BGL and XYL. Most importantly, compared to a medium using freshwater, the proportion of 1:10 sludge to wastewater, which contained nutrient elements, led to 3.4-fold BGL and 3.7-fold XYL production improvements. This research describes the reuse of substrates that are largely and continuously generated from domestic wastewater treatment systems and agriculture residues, which consequently leads to the development of a simultaneous enzyme production process for sustainable biorefinery practices.

Enhanced Enzymatic Hydrolysis and Structure Properties of Bamboo by Moderate Two-Step Pretreatment

A moderate two-step pretreatment method was investigated to improve the enzymatic saccharification of bamboo residues. SEM and FTIR were employed to characterize the structure changes. Fed-batch enzymatic saccharification was performed to obtain high concentration of fermentable sugar. Bamboo was impregnated at low severity of conditions (room temperature, 2% H₂SO₄ or 2% NaOH, 48 h) to initially alter the structure of bamboo, and then further pretreated by steam explosion at 1.0 MPa for 6 min. The highest delignification of 51% and the highest enzymatic hydrolysis of 47.1% were reached at 2% NaOH impregnation followed by steam explosion. The changes in the structural characteristics showed beneficial effects on the enzymatic hydrolysis. When a mixer of cellulase (30 FPU) and β-glucosidase (10 CBU) was further used, the maximum enzymatic hydrolysis of 78.9% and total glucose yield of 68.2% were obtained. The maximum sugar release from the holocellulose was 500 mg/g bamboo, approximately 83.3% conversion efficiency based on monomeric sugar recovery. With fed-batch saccharification, a final substrate loading of 30% brought 107.7 g/L glucose, 35.81 g/L xylose, and 7.82 g/L arabinose release, respectively. This study provided an effective strategy for potential utilization of bamboo residues.

Liquid Hot Water Pretreatment and Enzymatic Hydrolysis as a Valorization Route of Italian Green Pepper Waste to Delivery Free Sugars

In this work, liquid hot water pretreatment (autohydrolysis) was used to improve enzymatic hydrolysis of a commonly consumed vegetable waste in Spain, Italian green pepper, to finally produce fermentable sugars. Firstly, the effect of temperature and contact time on sugar recovery during pretreatment (in insoluble solid and liquid fraction) was studied in detail. Then, enzymatic hydrolysis using commercial cellulase was performed with the insoluble solid resulting from pretreatment. The objective was to compare results with and without pretreatment. The results showed that the pretreatment step was effective to facilitate the sugars release in enzymatic hydrolysis, increasing the global sugar yield. This was especially notable when pretreatment was carried out at 180 °C for 40 min for glucose yields. In these conditions a global glucose yield of 61.02% was obtained. In addition, very low concentrations of phenolic compounds (ranging from 69.12 to 82.24 mg/L) were found in the liquid fraction from enzymatic hydrolysis, decreasing the possibility of fermentation inhibition produced by these components. Results showed that Italian green pepper is an interesting feedstock to obtain free sugars and prevent the enormous quantity of this food waste discarded annually.

Improving enzymatic hydrolysis of mechanically refined poplar branches with assistance of hydrothermal and Fenton pretreatment

The combination of different pretreatment methods can effectively overcome recalcitrance of lignocellulosic biomass to ensure its highly efficient conversion into bio-based products. In this study, the combined pretreatments of chemical methods (hydrothermal treatment and Fenton treatment) with mechanical refining were used to improve the enzymatic hydrolysis efficiency of poplar branches. The results indicated that hydrothermal pretreatment and Fenton pretreatment can effectively improve the enzymatic hydrolysis of poplar substrates, e.g., the maximum glucose conversion yield and glucose concentration reached 92.4% and 20.8 g/L, respectively. The pre-hydrolysates contained some valuable components such as monosaccharides, oligosaccharides, acetic acid, furfural, and hydroxymethylfurfural. The main characteristics (specific surface area, water retention value, fines content, and surface lignin concentration) of poplar substrates were obviously changed by the combined pretreatment, which benefit the enzymatic hydrolysis.

Product-oriented Direct Cleavage of Chemical Linkages in Lignin

Lignin is one of the most important biomacromolecules in the plant biomass and the largest renewable source of aromatic building blocks in nature. Selectively producing value-added chemicals from the catalytic transformation of renewable lignin is of strategic significance and meet sustainability targets owing to the excessive consumption of non-renewable petroleum resource, but remains a long-term challenge owing to the complexity of lignin structure. This Minireview provides a summary and perspective of the extensive research that provides insight into selectively catalytic transformations of lignin and its derived monomers via directed scissor of chemical linkages (C-O and C-C bonds) with product-oriented targets. Furthermore, some challenges and opportunities of lignin catalytic transformation are provided based on existing problems in this field for readers to discuss future research directions.

Effects of NaOH-catalyzed organosolv pretreatment and surfactant on the sugar production from sugarcane bagasse

In this study, NaOH-catalyzed organosolv pretreatment with different loading of NaOH (0-10%) was proposed to disrupt the recalcitrant structure by degrading lignin, reserve the majority of cellulose and hemicellulose, and improve the enzymatic efficiency of sugarcane bagasse. It was found that the higher loading of NaOH during organosolv pretreatment yielded more glucose, and the synergistic performance of NaOH and ethanol on enzymolysis was superior to that pretreated with only NaOH and only ethanol during two-step pretreatment. Furthermore, Tween 80 was added to determine its influence on enzymolysis after NaOH-catalyzed organosolv pretreatment, leading to the highest glucose yield of 95.1% at 24 h, which saved 2/3 hydrolysis time while generating the similar glucose yield comparing with that without Tween 80. However, the increased yields of glucose by adding Tween 80 were decreased as hydrolysis time was prolonged from 6 h to 24 h.

Enhancement of alkaline-oxidative delignification of wheat straw by semi-batch operation in a stirred tank reactor

This paper compares a semi-batch operation and a conventional one of an alkaline oxidative pretreatment of wheat straw carried out in a stirred tank reactor. For the pretreatment, different concentrations of biomass (6% up to 12% w/v) and two different particle sizes (mesh #40-60 and #>60) were experimented. The performance of processes was evaluated through the analysis of lignocellulosic composition of the biomass, and the enzymatic hydrolysis of pretreated biomass using the Cellic® CTec2 enzyme complex by Novozymes®. The process time of semi-batch operation is significantly lower than the batch one and enables a higher load of biomass, showing a delignification yield between 55 and 60%. In the first 5 h of reaction time, the enzymatic hydrolysis experiments reached their maximum yields of 72 and 66% according to reducing sugars conversion when using the mesh #>60 mesh and #40-60, respectively.

Greener and sustainable production of bioethylene from bioethanol: current status, opportunities and perspectives

The economic value of bioethylene produced from bioethanol dehydration is remarkable due to its extensive usage in the petrochemical industry. Bioethylene is produced through several routes, such as steam cracking of hydrocarbons from fossil fuel and dehydration of bioethanol, which can be produced through fermentation processes using renewable substrates such as glucose and starch. The rise in oil prices, environmental issues due to toxic emissions caused by the combustion of fossil fuel and depletion of fossil fuel resources have led a demand for an alternative pathway to produce green ethylene. One of the abundant alternative renewable sources for bioethanol production is biomass. Bioethanol produced from biomass is alleged to be a competitive alternative to bioethylene production as it is environmentally friendly and economical. In recent years, many studies have investigated catalysts and new reaction engineering pathways to enhance the bioethylene yield and to lower reaction temperature to drive the technology toward economic feasibility and practicality. This paper critically reviews bioethylene production from bioethanol in the presence of different catalysts, reaction conditions and reactor technologies to achieve a higher yield and selectivity of ethylene. Techno-economic and environmental assessments are performed to further development and commercialization. Finally, key issues and perspectives that require utmost attention to facilitate global penetration of technology are highlighted.

The Application of Polysaccharides and Their Derivatives in Pigment, Barrier, and Functional Paper Coatings

As one of the most abundant natural polymers in nature, polysaccharides have the potential to replace petroleum-based polymers that are difficult to degrade in paper coatings. Polysaccharide molecules have a large number of hydroxyl groups that can bind strongly with paper fibers through hydrogen bonds. Chemical modification can also effectively improve the mechanical, barrier, and hydrophobic properties of polysaccharide-based coating layers and thus can further improve the related properties of coated paper. Polysaccharides can also give paper additional functional properties by dispersing and adhering functional fillers, e.g., conductive particles, catalytic particles or antimicrobial chemicals, onto paper surface. Based on these, this paper reviews the application of natural polysaccharides, such as cellulose, hemicellulose, starch, chitosan, and sodium alginate, and their derivatives in paper coatings. This paper analyzes the improvements and influences of chemical structures and properties of polysaccharides on the mechanical, barrier, and hydrophobic properties of coated paper. This paper also summarizes the researches where polysaccharides are used as the adhesives to adhere inorganic or functional fillers onto paper surface to endow paper with great surface properties or special functions such as conductivity, catalytic, antibiotic, and fluorescence.

Itaconic acid production from undetoxified enzymatic hydrolysate of bamboo residues using Aspergillus terreus

Itaconic acid (IA) production by fermentation of undetoxified hydrolysate of bamboo residues by Aspergillus terreus was demonstrated. Monosaccharides were obtained by pretreatment and enzymatic hydrolysis of bamboo residues. A. terreus could not grow and synthesize IA in the hydrolysate. The buffer was confirmed to be an inhibitor, and was successfully replaced by deionized water as the suspension, to release equivalent sugar and eliminate the inhibition. Corn steep liquor significantly improved the adaptability of A. terreus to the hydrolysate at 2.0 g/L. The IA titer obtained (19.35 g/L IA) was the highest to be reported for IA production from lignocellulose without detoxification. Simultaneous saccharification and fermentation and fed-batch fermentation increased the titer to 22.43 g/L and 41.54 g/L, respectively. Meanwhile, economic assessment proved that bamboo residues were potential substrates for IA production with economic effectiveness.

The hydrothermal-alkaline/oxygen two-step pretreatment combined with the addition of surfactants reduced the amount of cellulase for enzymatic hydrolysis of reed

This study aimed to provide a low cost feasible pretreatment and enzymatic hydrolysis (EH) method for the effective dissolution of xylan and the high glucan digestibility of reed with a low enzyme loading. The combination of polyethylene glycol (PEG) 3000-enhanced EH and hydrothermal-alkaline/oxygen pretreatment was studied. Process conditions were optimized through response surface methodology. Three models of glucan conversion rate, pretreated solids yield and lignin removal rate were established, and their determination coefficient (R²) values were 0.9218, 0.7939, and 0.8156, respectively. The models and experiments were reliable and significant. The optimal conditions favored 94.5% xylan dissolution rate and 95.6% glucan digestibility by using a cellulase loading of 3 filter paper units (FPU)/g-pretreated solids, which obviously enhanced 30.7% of the glucan conversion rate. This method was applicable due to effective xylan dissolution, lignin removal, and EH with PEG 3000 addition, which can help saved 85% cellulase loading.

Novel recyclable deep eutectic solvent boost biomass pretreatment for enzymatic hydrolysis

Deep eutectic solvent (DES) with protonic acid shows the great potential for biomass valorization. However, the acid corrosion and recycling are still severe challenges in biorefinery. Herein, a novel DES by coordinating FeCl₃ in choline chloride/glycerol DES was designed for effective and recyclable pretreatment. As compared to DESs with FeCl₂, ZnCl₂, AlCl₃ and CuCl₂, DES with FeCl₃ approvingly retained most of cellulose in pretreated Hybrid Pennisetum (95.2%). Meanwhile, the cellulose saccharification significantly increased to 99.5%, which was six-fold higher than that of raw biomass. The excellent pretreatment performance was mainly attributed to the high removal of lignin (78.88 wt%) and hemicelluloses (93.63 wt%) under the synergistic effect of Lewis acid and proper hydrogen-bond interaction of DES with FeCl₃. Furthermore, almost all cellulose still can be converted into glucose after five recycling process. Overall, the process demonstrated designed pretreatment was great potential for the low-cost biorefinery and boost the biofuel development.

Conversion of Lignocellulosic Corn Agro-Waste into Cellulose Derivative and Its Potential Application as Pharmaceutical Excipient

Lignocellulosic biomass is widely grown in many agricultural-based countries. These are typically incinerated or discarded in open spaces, which further may cause severe health and environmental problems. Hence, the proper utilization and conversion of different parts of lignocellulosic biomasses (e.g., corn wastes derived leave, cob, stalk, and husk) into value-added materials could be a promising way of protecting both health and environments. In addition, they have high-potential for myriads applications (e.g., pharmaceuticals, cosmetics, textiles, and so on). In this context, herein, we isolated holocellulose (a mixture of alpha α, beta β, and gamma γ cellulose) from corn waste, and then it was converted into carboxymethyl cellulose (CMC). Subsequently, the prepared CMC was evaluated successfully to be used as a pharmaceutical excipient. Different characterization tools were employed for structural, morphological, and thermal properties of the extracted holocellulose and synthesized CMC. Results showed that the highest yield of CMC was obtained 187.5% along with the highest degree of substitution (DS i.e., 1.83) in a single stage (i.e., size reduction technique) with the lowest particle size of holocellulose (100 µm). This happened due to the use of a single stage instead of multiple stages. Finally, extracted CMC was successfully used as a pharmaceutical excipient with promising results compared to commercially available pharmaceutical-grade CMC.