Pretreatment-promoted sludge fermentation liquor improves biological nitrogen removal: Molecular insight into the role of dissolved organic matter

Recovery of organic matters by activated sludge from municipal wastewater: Performance and characterization

Municipal wastewater treatment processes consume a significant amount of energy and generate substantial carbon emissions. However, organic matters existing in municipal wastewater hold the potential as a valuable carbon source. Activated sludge has the potential to capture and recover the organic matters, thereby enriching carbon sources and facilitating subsequent sludge anaerobic digestion as well as in line with the concept of sustainable development. Based on above, this study investigated the enrichment and recovery characteristics and mechanisms of activated sludge adsorption on carbon sources in municipal wastewater, while optimizing the recovery conditions. The results indicated that insoluble organic matters, as well as a fraction of dissolved organic matters, can be effective recovered within approximately 40 min. Specifically, 74.1% of insoluble organic matters and 25.8% of soluble organic matters were successfully captured by the activated sludge, resulting in a 5.0% increase in sludge organic matter content. Moreover, activated sludge demonstrated remarkable recovery of particulate organic matters across various particle sizes, particularly larger particles (>5 μm) with high protein content. Notably, the dissolved biodegradable organics such as tryptophan and tyrosine protein-like substances according to 3D-EEM and lipids, proteins/amino sugars, and carbohydrates according to FT-ICR MS can be effectively recovered. Finally, the study revealed that the recovery of organic matters from the wastewater by activated sludge followed the pseudo-second-order kinetics model, with surface binding, hydrogen bonding and interparticle diffusion in sludge flocs as the primary adsorption mechanisms. This approach had abroad application prospects for improving the profitability of wastewater treatment plants.

Deciphering fluorescent and molecular fingerprint of dissolved organic matter leached from microplastics in water

Despite extensive research into the presence and behavior of microplastics (MPs) in the environment, limited attention has been given to the investigation of the characteristics of dissolved organic matter (DOM) that leaches from MPs (MPs-DOM). Herein, two frequently encountered plastic particles in aquatic environments, specifically polyethylene terephthalate (PET)- and polyethylene (PE)-MPs, were subjected to leaching in the aquatic settings for seven days, both in the absence of light and under UV irradiation. Measurements of dissolved organic carbon (DOC) indicated that UV exposure enhanced the liberation of DOM from PET-MPs, while PE-MPs did not exhibit such leaching. After UV treatment for seven days, the DOM released from PET-MPs increased by 25 times, while that from PE-MPs remained almost unchanged. Then, the molecular diversity and the evolving formation of DOM originating from different MPs were comprehensively analyzed with fluorescence excitation-emission matrix (EEM) and Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS). Specifically, both PET- and PE-DOM exhibited three fluorescence signatures, with the predominant C1 (tryptophan-like) component showing a decline in PET-DOM and a rise in PE-DOM during aging. The FT-ICR-MS analysis unveiled that PET-DOM grew more recalcitrant under UV exposure, while PE-DOM became increasingly labile. In brief, UV irradiation influences MPs-DOM release and transformation differently, depending on the plastic composition. This highlights the significance of exploring MPs-DOM transformation in securing environmental safety.

Effects of ozone on activated sludge: performance of anaerobic digestion and structure of the microbial community

The treatment and disposal of activated sludge are currently challenging tasks in the world. As a common biological engineering technology, biological fermentation exists with disadvantages such as low efficiency and complex process. Ozone pretreatments are commonly applied to improve this problem due to their high efficiency and low cost. In this study, the significant function of ozone in anaerobic fermentation gas production was verified with excess sludge. Compared with other untreated sludge, ozone pretreatment can effectively degrade activated sludge. After ozone treatment and mixing with primary sludge, the methane production of excess sludge increased by 49.30 and 50.78%, and the methanogenic activity increased by 69.99 and 73.83%, respectively. The results indicated that the mixing of primary sludge with excess sludge possessed synergistic effects, which contributed to the anaerobic fermentation of excess sludge. The results of microbial community structure exhibited that methanogenic processes mainly involve hydrogenogens, acidogens and methanogens. The relative abundance of both bacteria and microorganisms changed significantly in the early stage of hydraulic retention time, which coincided exactly with the gas production stage. This study provided a feasible pretreatment strategy to improve sludge biodegradability and revealed the role of microorganisms during anaerobic digestion.

Tracking the transformation pathway of dissolved organic matters (DOMs) in biochars under sludge pyrolysis via reactomics and molecular network analysis

This work examined the transformation pathways of sludge biochar-derived dissolved organic matters (SBC-derived DOMs) under sludge pyrolysis via FT-ICR-MS-based reactomics and molecular network analysis. Lignin/carboxylic-rich alicyclic molecules, proteins/aliphatic, and lipids of SBC-derived DOMs did not contribute equally to the overall pyrolytic reactions. Reactomics suggested that the pyrolysis reactions of SBC-derived DOMs consist of multiple cascade reactions involving the elimination of assemblages of reactive fragments during each pyrolysis reaction region, and the overall pyrolysis process was divided into three stages according to cascade reaction variations. Especially, cascade reactions at 400-500 °C produced potential environmental risk substances of N-containing, carbonyl-containing, and phenolic compounds. Besides, network analysis unraveled the complexity and number of molecular reaction pairs of SBC-derived DOMs decreased with the increase in pyrolytic temperatures. Keystone molecules and pathways results indicated that the pyrolytic temperature of the sludge pyrolysis process should be controlled at temperatures above 500 °C according to the harmful substances generation pattern in reaction products. Overall, the possible transformation pathways of SBC-derived DOMs during sludge pyrolysis treatment were proposed. This study elucidated the underlying mechanisms in generating SBC-derived DOMs and provided theoretical support for process optimization and harmful substances control of sludge pyrolysis.

Thermo-alkaline pretreatment of excess sludge: Effects of temperature on volatile fatty acids accumulation and microbial community

In order to explore the role of thermal-alkaline pretreatment temperatures (TAPT) in sludge fermentation and the microbial characteristics, five groups (100, 120, 140, 160 °C and control group) were set up and the results showed that the increasing TAPT promoted the dissolution of soluble chemical oxygen demand (SCOD) and VFAs, but had slight influence on the release of NH₄⁺-N and PO₄^3--P. What's more, when it was 120 °C, the SCOD dissolution was comparable to that at 160 °C. Overall, 120 °C was the optimal condition, corresponding to the fact that the maximum release of SCOD was 8788.74 mg/L (2.63 times of the control group), the maximum dissolution of VFAs was 4596 mg/L (about 1.28 times of the control group). The trend of C/N was not significant. High-throughput sequencing showed that Firmicutes and Actinobacteriota were enriched with the temperature increasing, while Proteobacteria and Chloroflexi did not change significantly. Firmicutes was in a stable dominant position. Temperature conditions brought about significant changes in microbial interspecific interaction. Carbohydrate and amino acids had the highest metabolic abundance, especially at 120 °C group. The change rule of amino acid metabolism was similar to that of lipid metabolism, and the abundance of energy metabolism gradually increased with temperature. The protein metabolism was greatly affected by temperature. This study revealed the effect of microbial mechanism of TAPT on the sludge acid production efficiency.

Role of pretreatment type and microbial mechanisms on enhancing volatile fatty acids production during anaerobic fermentation of refinery waste activated sludge

This study compared the effects of alkaline, thermal, thermal-peroxymonosulfate (PMS), and alkyl polyglucose (APG) pretreatments on volatile fatty acids (VFAs) production from refinery waste activated sludge (RWAS), including VFAs yield, composition, organics components, microbial communities, and the potential improvement of mechanisms. All pretreatments effectively enhanced the bioconversion of RWAS and consequently promoted the hydrolysis process, which inhibited the methanogenesis process. However, the release of lignin/carboxyl-rich alicyclic molecules (CRAM)-like compounds and tannin substances in thermal-PMS and APG groups significantly influenced the acidogenesis and acetogenesis processes. Among all pretreatments, alkaline pretreatment showed the highest VFAs yield of 95.06 mg/g volatile solids (VS) and VS removal of 17%. This result could be associated with the enrichment of functional hydrolytic-acidification bacteria, such as Planococcus and Soehngenia, and increased metabolism of amino acids, carbohydrates, and nucleotides. By considering an economical and efficient perspective, this study recommended the alkaline pretreatment for the anaerobic fermentation of RWAS.

Characterizing molecular transformation of dissolved organic matter during high-solid anaerobic digestion of dewatered sludge using ESI FT-ICR MS

In this study, the effects of anaerobic digestion (AD) on molecular characteristics of dissolved organic matter (DOM) in the dewatered sludge has been described by advanced electrospray ionization combined with Fourier transform ion cyclotron resonance mass spectrometry (ESI FT-ICR MS) technology. With the progress of AD, molecular amounts in DOM samples increased with the lowering in the carbon atom number of average molecular formula and average double bond equivalent (DBE). CHON and CHONS groups are the two main organic substances in sludge with their relative DOM proportions of 29.64% and 32.56%, respectively. The resistants (i.e., refractory organic matter) mainly consist of the proteins regions of CHO groups as well as the proteins/lignin regions of CHON groups. The contrasting temporal trends in protein contents (e.g., decrease (CHO and CHON) vs. increase (CHONS)) may imply differences in their degradation characteristics. Likewise, the multi-N (N₃, N₄) and S₂ organic groups in the sludge are converted to N₂ and S₁ molecules, while the relative abundance of O atoms (in Ox molecules) tends to increase. In addition, the resistants in sludge DOM contain high oxidizing C and low unsaturation. The overall results of this research are expected to provide the theoretical basis for further optimization of the sludge AD process.

Removal of Toxic Metals from Sewage Sludge by Acid Hydrolysis Coupled with EDTA Washing in a Closed-Loop Process

Contamination with toxic metals prevents the use of sewage sludge (SS) as a soil fertilizer. Hydrodynamic cavitation, thermal microwaving, microwave-assisted alkaline, and acid hydrolysis coupled with ethylenediaminetetraacetate (EDTA) washing were tested as a method to remove toxic metals from SS. Acid hydrolysis coupled with EDTA washing was most effective and was used in a closed-loop process based on ReSoil technology. EDTA and process solutions were recycled at a pH gradient of 12.5-2, which was imposed by the addition of quicklime (CaO) and H₂SO₄. An average of 78%-Pb, 76%-Zn, 1%-Cu, and 17%-Cr were removed from SS in five consecutive batches. No wastewater was generated, only solid waste (40%). The EDTA lost in the process (42%) was resupplied in each batch. In a series of batches, the process solutions retained metal removal efficiency and quality. The treatment removed 70% and 23% of P and N, respectively, from SS and increased the leachability of Zn, Cu, Mn, and Fe in the washed SS by 11.7, 6.8, 1.4, and 5.2 times, respectively. Acid hydrolysis coupled with EDTA washing proved to be a technically feasible, closed-loop process but needs further development to reduce reagent, material, and nutrient loss and to reduce toxic emissions from the washed sludge.

A novel approach to estimate and control denitrification performance in activated sludge systems with respirogram technology

Respirogram technology has been widely applied for aerobic process, however, the response of respirogram to anoxic denitrification is still unclear. To reveal such response may help to design a new method for the evaluation of the performance of denitrification. The size distribution of flocs measured at different denitrification moments demonstrated a clear expansion of flocs triggered by denitrification, during which higher specific endogenous and quasi-endogenous respiration rates (SOUR_e and SOUR_q) were also observed. Furthermore, SOUR_q increases exponentially with the specific denitrification rate (SDNR), suggesting that there should be a maximum SDNR in conventional activated sludge systems. Based on these findings, an index R_q/t, defined as the ratio of quasi-endogenous (OUR_q) to maximum respiration rate (OUR_t), is proposed to estimate the denitrification capacity that higher R_q/t indicates higher denitrification potential, which can be readily obtained without complex measurement or analysis, and it offers a novel and promising respirogram-based approach for denitrification estimation and control by taking measures to extend anoxic time to maintain its value at a high level within a certain range.

Comparison of primary and secondary sludge carbon sources derived from hydrolysis or acidogenesis for nitrate reduction and denitrification kinetics: Organics utilization and microbial community shift

Seeking available and economical carbon sources for denitrification process is an intractable issue for wastewater treatment. However, no study compared different types of waste sludge as carbon source from denitrification mechanism, organics utilization and microbial community aspects. In this study, primary and secondary sludge were pretreated by thermophilic bacteria (TB), and its hydrolysis or acidogenic liquid were prepared as carbon sources for denitrification. At C/N of 8-3, the variations of NO₃^--N and NO₂^--N were profiled in typical cycles and denitrification kinetics was analyzed. Primary sludge achieved a competitive NO_X-N removal efficiency with less dosage than secondary sludge. Fourier transform infrared (FTIR) spectroscopy was introduced to analyze organic composition from functional-group perspective and the utilization of organic matters in different sludge carbon sources was investigated. To further analyze the microbial community shift in different denitrification systems, high-throughput sequencing technology was applied. Results showed that denitrifier Thauera, belonging to Proteobacteria, was predominant, and primary sludge acidogenic liquid enriched Thauera most intensively with relative abundance of 47.3%.

Molecular transformation and composition flow of dissolved organic matter in four typical concentrated leachates from the multi-stage membrane system

Concentrated leachate (CL), characterized with high content salts and compositional complexity of dissolved organic matter (DOM), is difficult to degrade. Understanding the CL from molecular insight level is the requirement for further disposal based on their components. Here, typical CL samples were collected from the multi-stage membrane separation process in a large-scale leachate plant, including nanofiltration (NF), primary ultrafiltration (PUF), secondary nanofiltration (SNF), and reverse osmosis (RO). More than 95% of DOM was removed from raw CL, of which about 3/4 flowed into PUFCL and 1/5 flowed into SNFCL. DOM with macro-molecular weight (>500 Da, 30.46%) and highly unsaturated compounds (double-bond equivalents >15) were detected in PUFCL. Nearly half of DOM was CHO-only compounds (42.04%) in SNFCL. PUFCL was abundant in heteroatom species with higher-order oxygen (O ≥ 10), which was coincident with the trend of humic substance distribution (humic substance >1/2). Based on these properties results, advanced oxidation processes, such as ozonation, might be the right process for SNFCL rich in heteroatom species with low-order oxygen (O < 10). Abundant disulfides (S₂O_2-6 classes, 20.19%) and monovalent salts existed in ROCL, which should be removed from the system. These findings might provide basic information for the treatment of CLs from different membranes.

A proof-of-concept experimental study for vacuum-driven anaerobic biosolids fermentation using the IntensiCarb technology

This study demonstrates the potential of an innovative anaerobic treatment technology for municipal biosolids (IntensiCarb), which relies on vacuum evaporation to decouple solids and hydraulic retention times (SRT and HRT). We present proof-of-concept experiments using primary sludge and thickened waste activated sludge (50-50 v/v mixture) as feed for fermentation and carbon upgrading with the IntensiCarb unit. IntensiCarb fully decoupled the HRT and SRT in continuously stirred anaerobic reactors (CSAR) to achieve two intensification factors, that is, 1.3 and 2, while keeping the SRT constant at 3 days (including in the control fermenter). The intensified CSARs were compared to a conventional control system to determine the yields of particulate hydrolysis, VFA production, and nitrogen partitioning between fermentate and condensate. The intensified CSAR operating at an intensification factor 2 achieved a 65% improvement in particulate solubilization. Almost 50% of total ammonia was extracted without pH adjustment, while carbon was retained in the fermentate. Based on these results, the IntensiCarb technology allows water resource recovery facilities to achieve a high degree of plant-wide intensification while partitioning nutrients into different streams and thickening solids. PRACTITIONER POINTS: The IntensiCarb reactor can decouple hydraulic (HRT) and solids (SRT) retention times in anaerobic systems while also increasing particulate hydrolysis and overall plant capacity. Using vacuum as driving force of the IntensiCarb technology, the system could achieve thickening, digestion, and partial dewatering in the same unit-thus eliminating the complexity of multi-stage biosolids treatment lines. The ability to partition nutrients between particulate, fermentate, and condensate assigns to the IntensiCarb unit a key role in recovery strategies for value-added products such as nitrogen, phosphorus, and carbon, which can be recovered separately and independently.

The extent of sludge solubilization allows to estimate the efficacy of ozonation for removal of polycyclic aromatic hydrocarbons (PAHs) in municipal sewage sludge

Ozone treatment has been proven as an effective technology for removing PAHs in municipal sewage sludge. However, given the complex interaction of PAHs with sludge extracellular polymeric substances (EPS), effective sludge disintegration is required to make PAHs more accessible to oxidants, which also affects PAHs partitioning. Here, we investigated two treatment systems, namely ozonation (ozone) and sequential hydrodynamic cavitation and ozonation (HC+ozone), under varied conditions, to determine whether the extent of sludge disintegration can estimate a measurable removal of PAHs. The results showed that both the PAHs removal efficiency and kinetics highly depended on pH and ozone dose. Although no significant removal of PAHs occurred during HC treatment, the observed rate constants for Σ₁₆ PAHs removal in HC+ozone system were 1.2-1.4-fold higher than those obtained in ozone system under the same condition. The accelerated PAHs removal could be attributed to the reduced flocs size (80% smaller) and increased soluble EPS concentration (5-fold higher) with HC pretreatment. Lastly, a positive correlation was noted between the PAHs removal efficiency and soluble EPS concentration (R² = 0.85), indicating the important role of dissolved and colloidal matter (DCM) for PAHs partitioning between aqueous and particulate phases.

Towards efficient elimination of polycyclic aromatic hydrocarbons (PAHs) from waste activated sludge by ozonation

Sewage sludge is one of the sinks for PAHs accumulation and concerns are growing regarding the environmental risk of the discharge of PAHs in waste activated sludge (WAS) as a major byproduct of sewage treatment. Here, we evaluated the effectiveness of ozone treatment to eliminate the 16 priority PAHs in WAS. The PAHs removal efficiency increased with ozone dosage and was strongly pH dependent. Even at ozone dosage of 40 mg O₃·g^-1, the PAHs removal efficiency at pH 9.0 (44.5%) was significantly higher than that observed at pH 5.0 and 200 mg O₃·g^-1 (41.7%). The pH-dependent elimination behavior of PAHs was attributed to the varying yield of hydroxyl radicals (OH) and degree of sludge disintegration (R² = 0.88-0.92). Over 96% of the PAHs were in the particulate flocs (PF) phase, while the fraction bound to the freely dissolved (FS) and dissolved and colloidal (DC) matters was negligible, indicating the need of WAS disintegration during ozonation to make PAHs more accessible to O₃ molecules and OH to initiate oxidation reactions. Failure of the three-compartment model to describe the PAHs sorption behavior in sludge matrix during ozonation implied that oxidation reaction occurred simultaneously with the partitioning of PAHs from PS to DC/FS fraction. Lastly, the results of the intermittent ozonation experiment demonstrated the interference of soluble organic compounds during PAHs degradation, particularly proteins and humic substances, as O₃ and OH scavengers. At ozone dosage of 120 mg O₃·g^-1 (pH 9.0), the PAHs removal efficiency was improved by 19.5% by intermittent ozonation, as compared to continuous ozonation under the same conditions.

Organic matter affects phosphorus recovery during vivianite crystallization

Vivianite crystallization is a promising route for phosphorus (P) recovery from P-rich wastewater. However, organic matter (OM) in wastewater may influence vivianite formation. In this study, the effects of four representative OMs, glucose, bovine serum albumin (BSA), humic acid (HA) and sodium alginate (SA), on P recovery by vivianite were investigated. The results showed that P recovery efficiency was inhibited by HA and SA, declining by 3.7% and 12.1% under HA (100 mg/L) and SA (800 mg/L), respectively. BSA, HA and SA affected the aggregated form of vivianite crystals. Vivianite particle size decreased in the presence of HA and SA. Subsequent mechanistic exploration indicated that the complexation between the OM and Fe²⁺ was the main cause of P recovery efficiency reduction. The coprecipitation of HA and SA with vivianite could reduce the zeta potential on the crystal surface, resulting in a smaller particle size. The nucleation sites provided by BSA and SA could transfer vivianite from single plate-like agglomerate to multilayer plate-like agglomerate. This study provided a better understanding of P recovery by vivianite from OM-rich wastewater.

Insights into the molecular transformation in the dissolved organic compounds of agro-waste-hydrochars by microbial-aging using electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry

Hydrochars-based dissolved organic matters (DOM) are easily available to organisms and thus have important influence on the biota once applying hydrochars as environment amendment. Thus, positive modifications on molecular composition of DOM is indispensable before hydrochars application. In this study, the impacts of microbial-aging by anaerobic fermentation on DOM of agro-waste-hydrochars was systematically assessed. Results revealed that microbial-aging caused lower DOM release but higher DOM molecular diversity. Moreover, microbial-aging resulted in the production of more biodegradable compounds, including lipids and proteins, and reduced the aromaticity of DOM. The highly oxygenated molecules (O/C > 0.6) were shifted into lower-order ones in the hydrochars-based DOM, suggesting the transformation of hydrophilic compounds into hydrophobic ones. Additionally, microbial-aging promoted the degradation of phenols by 99.0-98.9%, phenolic acids 37.8-73.5%, and polycyclic aromatic hydrocarbons by 83.4-90.4% in hydrochar-based DOM. Overall, this study demonstrates that microbial-aging changes the molecular characteristics of hydrochars-based DOM in a positive manner.

Changes in the characteristics of dissolved organic matter during sludge treatment: A critical review

Dissolved organic matter (DOM) of sludge is a heterogeneous mixture of high to low molecular weight organic substances which is including proteinaceous compounds, carbohydrates, humic substances, lipids, lignins, organic acids, organic micropollutants and other biological derived substances generated during wastewater treatment. This paper reviews definition, composition, quantification, and transformation of DOM during different sludge treatments, and the complex interplay of DOM with microbial communities. In anaerobic digestion, anaerobic digestion-refractory organic matter, particularly compounds showing polycyclic steroid-like, alkane and aromatic structures can be generated after pretreatment. During dewatering, the DOM fraction of low molecular weight proteins (< 20,000 Dalton) is the key parameter deteriorating sludge dewaterability. During composting, decomposition and polymerization of DOM occur, followed by the formation of humic substances. During landfill treatment, the composition of DOM, particularly humic substances, are related with leachate quality. Finally, suggestions are proposed for a better understanding of the transformation and degradation of DOM during sludge treatment. Future work in sludge studies needs the establishment and implementation of definitions for sample handling and the standardization of DOM methods for analysis, including sample preparation and fractionation, and data integration. A more detailed knowledge of DOM in sludge facilitates the operation and optimization of sludge treatment technologies.

Accelerating nutrient release and pathogen inactivation from human waste by different pretreatment methods

The limitation of hydrolysis and the health risks from pathogenic microorganisms are challenges in the treatment of human waste for volume reduction and nutrient recovery. In this study, potassium ferrate (PF), peroxymonosulfate (PMS), and PF combined with peroxymonosulfate (PMS+ PF) were used as pretreatment or co-treatment methods to enhance nutrient release and control pathogenic microorganisms in human waste. The PF pretreatment was the most effective regarding hydrolysis and organic matter release. The largest difference (D-value) in the soluble chemical oxygen demand (3117.0 mg/L) between the control and the treatment after 120 min was observed for the PF pretreatment, followed by the alkaline (ALK) pretreatment (1525.0 mg/L), the PF + PMS pretreatment (1169.3 mg/L), and the PMS pretreatment (1020.6 mg/L). The PF pre-treated waste exhibited the highest volatile solids reduction of 79.2% after 120 min compared with 15.0% reduction of the untreated waste, as well as the highest polysaccharide release, with a D-value of 198.5 mg/L. All pretreatments exhibited inactivation of pathogenic bacteria and helminths eggs; however, the PF pretreatment was the most efficient method to suppress pathogenic micrograms, with a 3.5 log (N/N₀) decrease in the number of total coliforms. The PF pretreatment and PMS + PF co-treatment both exhibited the good performance regarding nitrogen release, including soluble protein and ammonium. The maximum D-value of the total soluble nitrogen was 372.8 mg/L for the PF + PMS co-treatment. The maximum D-value of soluble protein was 156.2 mg/L for the ALK pretreatment. The results indicated that the PF pretreatment was the most effective method for disintegrating human waste, thus providing a new method for safe and rapid reduction of human waste, as well as nutrient release.

Short-chain fatty acids recovery from sewage sludge via acidogenic fermentation as a carbon source for denitrification: A review

Wastewater treatment plants face the problem of a shortage of carbon source for denitrification. Acidogenic fermentation is an effective method for recovering short-chain fatty acids (SCFAs) as a carbon source from sewage sludge. Herein, the most recent advances in SCFAs production from primary sludge and waste activated sludge are systematically summarised and discussed. New technologies and problems pertaining to the improvement in SCFAs availability in fermentation liquids, including removal of ammoniacal nitrogen and phosphate and extraction of SCFAs from fermentation liquids, are analysed and evaluated. Furthermore, studies on the use of recovered SCFAs as a carbon source for denitrification are reviewed. Based on the above summarisation and discussion, some conclusions as well as perspectives on future studies and practical applications are presented. In particular, the recovery of carbon source/bioenergy from sewage sludge must be optimised considering nutrient removal/recovery simultaneously.

Effect of magnetic powder on denitrification using the sludge alkaline fermentation liquid as a carbon source

This work evaluates the impact of the different concentrations of Fe₃O₄ on nitrate removal and organic matters utilization in the sequencing batch reactors (SBRs) using the sludge alkaline digestion supernatant as external sludge carbon source. Results indicated that the optimal concentration of Fe₃O₄ was 1 g/L for enhancing denitrification with NO₃^--N removal efficiency of 93.13% (up to a 11.93% increase) and without NO₂^--N accumulation after 18 days. The changes of soluble chemical oxygen demand (SCOD), protein, and carbohydrate during denitrification process were analyzed to gauge the utilization of sludge fermentation products by denitrifiers. The SCOD was consumed for organisms involved in NO₃^--N removal and the Fe₃O₄ could promote the utilization of carbohydrate better than protein by denitrifiers during denitrification process. Denitrification rate (V_DN) and the nitrate-to-nitrite transformation ratio (NTR), as the kinetics parameters, were also investigated in different concentrations of Fe₃O₄.