A novel method for removing heavy metals from composting system: The combination of functional bacteria and adsorbent materials

Simultaneous removal of nitrate, manganese, zinc, and bisphenol A by a biofilm reactor with β-CD modified corn stover biochar and PU sponges: Performance and microbial community response

In the present study, a biofilm reactor with manganese (Mn) redox cycling was established to remove nitrate (NO3--N), bisphenol A (BPA), zinc (Zn(II)), and Mn(II) using β-cyclodextrin (β-CD) modified corn stover biochar (BC) and polyurethane sponges loaded with Cupriavidus sp. HY129 and Pantoea sp. MFG10. At C/N = 2.0, HRT = 6 h, Mn(II) = 10.0 mg L-1, and BPA and Zn(II) concentrations = 1.0 mg L-1, the removal efficiencies of NO3--N, Zn(II), BPA, and Mn(II) were 81.5%, 86.5%, 87.9%, and 75.5%, respectively. The outcomes demonstrated the success that the addition of β-CD could accelerate electron transfer activity and the denitrification process. The remediation of BPA and Zn(II) was mainly through the adsorption of bioprecipitation generated by reactor operation. The bioreactor could preserve the stability of the biological community and the expression of pertinent functional genes under the coercion of BPA and Zn(II).

Effects of an assistive electric field on heavy metal passivation during manure composting

Composting is one of main technologies for treating and thus utilizing livestock manure and sludge. However, heavy metals are major concerns in compost utilization due to their potential environmental hazards and health risks. This study aimed to investigate the effects of electric field-assisted composting on the variations of heavy metals and the affecting factors. The results showed that electric field significantly reduced the contents of bioavailable heavy metals including Mn, Zn, Cu, Ni, and Cd, with their bioavailable concentrations decreasing by 61.7, 63.8, 64.9, 83.7, and 63.8 %, respectively. The heavy metals being transformed into stable states were increased, indicating that the electric field also passivated these heavy metals and reduced their biological toxicity and stabilized their forms. Spearman's correlation analysis revealed that the changes in substances, temperature, and organic matter were the dominant environmental factors affecting the forms of heavy metals. Microbial community analysis indicated an increase in the abundance of metal-resistant bacteria such as Pseudomonas and Bacillus during electric field-assisted composting, with their relative abundances being increased to 2.66 % and 15.63 % in the pile of electric field-assisted composting, respectively, compared to the values of 1.88 % and 4.36 % respectively in the conventional composting. The current study suggests that electric field-assisted composting can significantly reduce the availability of heavy metals in the compost, and thus mitigate the health risks associated with its application.

Roles and significance of chelating agents for potentially toxic elements (PTEs) phytoremediation in soil: A review

Phytoremediation is a biological remediation technique known for low-cost technology and environmentally friendly approach, which employs plants to extract, stabilise, and transform various compounds, such as potentially toxic elements (PTEs), in the soil or water. Recent developments in utilising chelating agents soil remediation have led to a renewed interest in chelate-induced phytoremediation. This review article summarises the roles of various chelating agents and the mechanisms of chelate-induced phytoremediation. This paper also discusses the recent findings on the impacts of chelating agents on PTEs uptake and plant growth and development in phytoremediation. It was found that the chelating agents have increased the rate of metal absorption and translocation up to 45% from roots to the aboveground plant parts during PTEs phytoremediation. Besides, it was also explored that the plants may experience some phytotoxicity after adding chelating agents to the soil. However, due to the leaching potential of synthetic chelating agents, the use of organic chelants have been explored to be used in PTEs phytoremediation. Finally, this paper also presents comprehensive insights on the significance of using chelating agents through SWOT analysis to discuss the advantages and limitations of chelate-induced phytoremediation.

Trends in the management of organic swine farm waste by composting: A systematic review

Pig farming contributes to the economic development of nations and supplies human food demand; however, it generates a large amount of organic waste which, if not managed properly, becomes a risk to the environment and human and animal health. Considering the relevance of composting and its usefulness for the use of waste, this study aimed to determine the global trends in the management of composting manure, mortality and other organic waste produced on pig farms over the last five years (2017-2022). Systematic search involved four databases: ISI Web of Science, Scopus, Ebsco and Scielo. Of the total findings, 56 articles were included in the review, further classified into 14 categories for their respective analysis: co-substrates/additives, microbial communities, antibiotic resistance, heavy metals, polycyclic aromatic hydrocarbons, microbiological/parasitological quality, phytopathogens, nitrogen transformation, bioinoculants, comparison/combination with other waste management techniques, factors affecting composting, swine mortality and plant growth promotion/phytotoxicity. The review exemplified the importance of swine mortality composting as an alternative for organic matter management in pig farms, considering that the process also includes manure, vegetable waste and wood chips, among others. Controlled factors throughout the process are a requirement to obtain a stable product with physicochemical and microbiological quality that complies with national and international regulations and that will be useful and safe for application on crops, ensuring environmental, animal, and human health.

The driving mechanism of passivator islands adsorbing and immobilizing heavy metals during chicken manure composting

The aim of this study was to assess the effectiveness of biochar and montmorillonite islands on heavy metal adsorptive immobilization and identify crucial driving factors and pathways during chicken manure composting. Compared to montmorillonite (6.74 and 89.25 mg/kg), biochar exhibited an obviously higher ability of Cu and Zn enrichment (41.79 and 167.77mg/kg), might be attributed to its abundant active functional groups. Network analysis showed that compared to Cu, core bacteria positively and negatively related to Zn was obviously more and less in passivator islands, respectively, which might explain significantly higher Zn concentration. Structural Equation Model displayed that dissolved organic carbon (DOC), pH and bacteria were critical driving factors. Pretreatment of passivator packages, such as soaking in the solution being rich in DOC and inoculating specific microbial agents accumulating heavy metals via extracellular adsorption /intracellular interception would significantly improve the effectiveness of adsorptive passivation on heavy metals.

Chemical Recycling Processes of Waste Polyethylene Terephthalate Using Solid Catalysts

Polyethylene terephthalate (PET) is a non-degradable single-use plastic and a major component of plastic waste in landfills. Chemical recycling is one of the most widely adopted methods to transform post-consumer PET into PET's building block chemicals. Non-catalytic depolymerization of PET is very slow and requires high temperatures and/or pressures. Recent advancements in the field of material science and catalysis have delivered several innovative strategies to promote PET depolymerization under mild reaction conditions. Particularly, heterogeneous catalysts assisted depolymerization of post-consumer PET to monomers and other value-added chemicals is the most industrially compatible method. This review includes current progresses on the heterogeneously catalyzed chemical recycling of PET. It describes four key pathways for PET depolymerization including, glycolysis, pyrolysis, alcoholysis, and reductive depolymerization. The catalyst function, active sites and structure-activity correlations are briefly outlined in each section. An outlook for future development is also presented.

Microbiological inoculation with and without biochar reduces the bioavailability of heavy metals by microbial correlation in pig manure composting

Biochar provides a suitable microenvironment for the growth of microorganisms. It may directly or indirectly affect changes in the population of microorganisms, thus affecting heavy metal bioavailability. This study aims to explore the effects of microbiological inoculation with and without biochar on microorganisms and on the bioavailability of heavy metals during pig manure composting. Three composting experiments were conducted under various conditions including no treatment (CK), only microbiological inoculation (TA), and integration with biochar (TB). Compared with raw materials before compost, TA reduced the bioavailability of Cu by 25.1%, Zn by 25.64%, and both Pb and Cr by 1.75%. TB reduced the bioavailability of Cu by 35.38%, Zn by 19.34%, Pb by 0.81%, and Cr by 3.9%. Furthermore, correlation analysis demonstrated that Debaryomyces were the primary fungi, possibly controlling the passivation of Cr. Bacillus, Fusarium, Pseudogracilibacillus, Sinibacillus, and Botryotrichum were the primary bacteria and fungi potentially governing the passivation of Zn, Lastly, Debaryomyces and Penicillium were the primary bacteria and fungi potentially controlling the passivation of Pb and Cu, respectively. Overall, we demonstrated that pig manure added to the microbial inoculum and biochar effectively reduced the bioavailability of heavy metals, thereby offering an applicable technology for reducing heavy metal contamination during pig manure composting.

Limited Role of Rhamnolipids on Cadmium Resistance for an Endogenous-Secretion Bacterium

Rhamnolipids, a type of biosurfactant, represent a potential strategy for both enhancing organismic resistance and in situ remediation of heavy metals contaminations. In-depth study of the mechanism of rhamnolipids synthesis in response to heavy metals stress, is indispensable for a wide use of biosurfactant-secreting microbes in bioremediation. In this study, we employed the wild-type and the rhlAB deficient strain (ΔrhlAB) of Pseudomonas aeruginosa, a prototypal rhamnolipids-producing soil microorganism, to investigate its responses to cadmium resistance based on its physicochemical, and physiological properties. Compared with the wild-type strain, the ΔrhlAB were more sensitive to Cd-stress at low Cd concentration (<50 mg/L), whereas there was little difference in sensitivity at higher Cd concentrations, as shown by spot titers and cell viability assays. Secreted rhamnolipids reduced intracellular Cd²⁺ accumulation to alleviate Cd²⁺ stress, whereas endogenous rhamnolipids played a limited role in alleviating Cd²⁺ stress. Synthesized rhamnolipids exhibited a higher critical micelle concentration (CMC) (674.1 mg/L) and lower emulsification index (4.7%) under high Cd-stress, while these parameters showed no obvious changes. High Cd-stress resulted in high hydrophilic wild-type bacterial surface and lower bioremediation ability. This study could advance a deeper understanding of the mechanism of cadmium resistance and provide a theoretical foundation for the application of biosurfactant and biosurfactant-secreted bacterium in contaminant bioremediation.

Effects of different additives and aerobic composting factors on heavy metal bioavailability reduction and compost parameters: A meta-analysis

Additives are considered a promising approach to accelerate the composting process and alleviate the dissemination of pollutants to the environment. However, nearly all previous articles have focused on the impact of additive amounts on the reduction of HMs, which may not fully represent the main factor shaping HMs bioavailability status during composting. Simultaneously, previous reviews only explored the impacts, speciation, and toxicity mechanism of HMs during composting. Hence, a global-scale meta-analysis was conducted to investigate the response patterns of HMs bioavailability and compost parameters to different additives, composting duration, and composting factors (additive types, feedstock, bulking agents, and composting methods) by measuring the weighted mean values of the response ratio "[ln (RR)]" and size effect (%). The results revealed that additives significantly lessened HMs bioavailability by ≥ 40% in the final compost products than controls. The bioavailability decline rates were -40%, -60%, -57%, -55%, -42%, and -44% for Zn, Pb, Ni, Cu, Cr, and Cd. Simultaneously, additives significantly improved the total nitrogen (TN) (+16%), pH (+5%), and temperature (+5%), and decreased total organic carbon (TOC) (-17%), moisture content (MC) (-18%), and C/N ratio (-19%). Furthermore, we found that the prolongation of composting time significantly promoted the effect of additives on declining HMs bioavailability (p < 0.05). Nevertheless, increasing additive amounts revealed an insignificant impact on decreasing the HMs bioavailability (p > 0.05). Eventually, using zeolite as an additive, chicken manure as feedstock, sawdust as a bulking agent, and a reactor as composting method had the most significant reduction effect on HMs bioavailability (p < 0.05). The findings of this meta-analysis may contribute to the selection, modification, and application of additives and composting factors to manage the level of bioavailable HMs in the compost products.

Removal of toxic heavy metals using genetically engineered microbes: Molecular tools, risk assessment and management strategies

The direct release of industrial effluent into the water and other anthropogenic activities causes water pollution. Heavy metal ions are the primary contaminant in the industrial effluents which are exceptionally toxic at low concentrations, terribly disturb the endurance equilibrium of activities in the eco-system and be remarkably hazardous to human health. Different conventional treatment methodologies were utilized for the removal of toxic pollutants from the contaminated water which has several drawbacks such as cost-ineffective and lower efficiency. Recently, genetically modified micro-organisms (GMMs) stand-out for the removal of toxic heavy metals are viewed as an economically plausible and environmentally safe technique. GMMs are microorganisms whose genetic material has been changed utilizing genetic engineering techniques that exhibit enhanced removal efficiency in comparison with the other treatment methodologies. The present review comments the GMMs such as bacteria, algae and fungi and their potential for the removal of toxic heavy metals. This review provides current aspects of different advanced molecular tools which have been used to manipulate micro-organisms through genetic expression for the breakdown of metal compounds in polluted areas. The strategies, major limitations and challenges for genetic engineering of micro-organisms have been reviewed. The current review investigates the approaches working on utilizing genetically modified micro-organisms and effective removal techniques.

Calorific Value of Festuca rubra Biomass in the Phytostabilization of Soil Contaminated with Nickel, Cobalt and Cadmium Which Disrupt the Microbiological and Biochemical Properties of Soil

The choice of optimal plant species for phytoremediation and organic fertilization plays an important role in stabilizing the functions of soils contaminated with heavy metals. The influence of nickel, cobalt and cadmium on the biomass yield and calorific value of Festuca rubra, heavy metal concentrations in soil and plants and the microbiological, biochemical and physicochemical proprieties of soil were analyzed in a pot experiment. The tolerance index (TI) describing Festuca rubra’s ability to tolerate heavy metals, as well as the translocation (TF), accumulation (AF) and bioaccumulation (BF) factors of heavy metals in Festuca rubra were calculated. The experiment was conducted in two series: In soil fertilized and not fertilized with compost. Nickel and cobalt significantly inhibited the growth and development of Festuca rubra. The experiment demonstrated that this plant species can be grown on soil contaminated with heavy metals. Festuca rubra contained on average 46.05% C, 34.59% O, 5.91% H, 3.49% N, 0.19% S and 9.76% ash. Festuca rubra has a stable calorific value which is not affected by heavy metals; therefore, biomass harvested from heavy metal-polluted soil can be used for energy generation. The calorific value of Festuca rubra ranged from 15.924 to 16.790 MJ kg−1 plant d.m., and the heat of combustion from 17.696 to 18.576 MJ kg−1. It has a stable calorific value which is not affected by heavy metals, therefore biomass harvested from heavy metal-polluted soil can be used for energy generation. Festuca rubra is particularly useful for the phytostabilization of soil contaminated with cadmium and cobalt. Compost minimizes the adverse effects of heavy metal pollution on the microbiological, biochemical and physicochemical properties of soil.

Variation and factors on heavy metal speciation during co-composting of rural sewage sludge and typical rural organic solid waste

In this study, a co-composting of rural organic solid waste (rural sewage sludge, kitchen waste and corn stalks) was conducted to analyze the variation of heavy metals (As, Cu, Cr, Ni, Pb, Hg, and Zn) and their major influencing factors. During composting, significant changes were observed in the total contents of heavy metals (p < 0.01): the total concentrations of As, Cu, Hg, Pb and Zn increased by 7.5%, 54.1%, 26.3%, 15.8%, and 34.2%, whereas that of Cr and Ni decreased by 71.3% and 33.4%, respectively. Heavy metals were mainly bound to the oxidizable and residual fractions. Spearman and Redundancy analysis (RDA) indicated that substances were significantly correlated with the changes in speciation of heavy metals, among all the factors, while pH and temperature were the dominating environmental influencing parameters. Several metal-resistant bacterial genera (Pseudomonas, Paenibacillus, Bacillus, Acinetobacter, Desulfovibrio, and Ochrobactrum, etc) were observed, with significant explanatory capacity for the changes in heavy metals. Composting showed a poor effect on heavy metal passivation, except for that of As. After composting, the heavy metal contents were consistent with the application standards. The evaluation of potential ecological risk showed a high cumulative ecological risk (336.9) of heavy metals. This study provides technical support and practical information for the disposal and safe recycling for rural organic solid waste.

Emerging disposal technologies of harmful phytoextraction biomass (HPB) containing heavy metals: A review

Phytoextraction is an effective approach for remediation of heavy metal (HM) contaminated soil. After the enhancement of phytoextraction efficiency has been systematically investigated and illustrated, the harmless disposal and value-added use of harmful phytoextraction biomass (HPB) become the major issue to be addressed. Therefore, in recent years, a large number of studies have focused on the disposal technologies for HPB, such as composting, enzyme hydrolysis, hydrothermal conversion, phyto-mining, and pyrolysis. The present review introduces their operation process, reaction parameters, economic/ecological advantages, and especially the migration and transformation behavior of HMs/biomass. Since plenty of plants possess comparable extraction abilities for HMs but with discrepancy constitution of biomass, the phytoextraction process should be combined with the disposal of HPB after harvested in the future, and thus a grading handling strategy for HPB is also presented. Hence, this review is significative for disposing of HPB and popularizing phytoextraction technologies.

Removed heavy metal ions from wastewater reuse for chemiluminescence: Successive application of lignin-based composite hydrogels

The novel sulfomethylated lignin-grafted-polyacrylic acid (SL-g-PAA) hydrogel was fabricated in this work via a facile and green synthetic strategy for the efficient removal of heavy metal ions from wastewater, and then successively reused for chemiluminescence (CL). The sulfomethylation of lignin was first performed to improve its water solubility and introduce numerous active sites for adsorption of heavy metal ions. The as-synthesized SL-g-PAA hydrogel with high content of lignin exhibited the highly efficient and rapid removal of various metal ions from simulated wastewater. More importantly, the spent hydrogel (M²⁺@SL-g-PAA) after adsorption was reused for the first time to develop a new CL system by an ingenious strategy, in which these metal ions adsorbed on M²⁺@SL-g-PAA act as heterogeneous catalytic sites to catalyze the CL reaction between N-(4-aminobutyl)-N-ethylisoluminol (ABEI) and H₂O₂. The resultant CL system displayed high CL intensity and long duration time, which could be observed by naked eye in the dark and lasted for > 24 h. The combination of facile fabrication process, renewable raw materials, and ingenious strategy for successive application in adsorption and CL endows this lignin-based composite hydrogel with a great potential for application in wastewater treatment, biological imaging and cold light sources.

Biological remediation technologies for dyes and heavy metals in wastewater treatment: New insight

The pollution of the environment caused by dyes and heavy metals emitted by industries has become a worldwide problem. The development of efficient, environmentally acceptable, and cost-effective methods of wastewater treatment containing dyes and heavy metals is critical. Biologically based techniques for treating effluents are fascinating since they provide several benefits over standard treatment methods. This review assesses the most recent developments in the use of biological based techniques to remove dyes and heavy metals from wastewater. The remediation of dyes and heavy metals by diverse microorganisms such as algae, bacteria, fungi and enzymes are depicted in detail. Ongoing biological method's advances, scientific prospects, problems, and the future prognosis are all highlighted. This review is useful for gaining a better integrated view of biological based wastewater treatment and for speeding future research on the function of biological methods in water purification applications.

A review on disposal and utilization of phytoremediation plants containing heavy metals

The reasonable disposal of plant biomass containing heavy metals (HMs) is a difficult problem for the phytoremediation technology. This review summarizes current literature that introduces various disposal and utilization methods (heat treatment, extraction treatment, microbial treatment, compression landfill, and synthesis of nanomaterials) for phytoremediation plants with HMs. The operation process and technical parameters of each disposal method are different. HMs can migrate and transform in different disposal processes. Some disposal and utilization methods can get some by-products. The main purpose of this paper is to provide reference for technical parameters and characteristics of various disposal and utilization methods, so as to choose and use the appropriate method for the treatment of plant biomass containing HMs after phytoremediation.

Give priority to abiotic factor of phosphate additives for pig manure composting to reduce heavy metal risk rather than bacterial contribution

Phosphate additives especially superphosphate can reduce nitrogen loss, and increase phosphorus availability in composting. This study investigated the changes of different heavy metals fractions and their relationship with bacterial community and abiotic factors during pig manure composting with adding equimolar H₃PO₄, H₂SO₄ and K₂HPO₄. Results showed that both acidic and alkaline labile phosphate increased the potential ecological risk of heavy metals compared to control, but K₂HPO₄ decreased the accumulation of exchangeable Zn and Mn by 12% and 15% than that with H₃PO₄ and H₂SO₄ addition. Network analysis showed that K₂HPO₄ enhanced the proportion of negative links in bacterial species with heavy metals, but H₃PO₄ decreased the stability of bacterial network. Redundancy analysis demonstrated that pH was the key factor on metal speciation and risk with phosphate additives than bacterial role. The study presented theoretical basis for additive selection in controlling composting nitrogen fixation and environmental risk.

Patterns of heavy metal resistant bacterial community succession influenced by biochar amendment during poultry manure composting

The purpose of this study was to investigate the heavy metal resistant bacteria (HMRB) community succession and bacterial activity in poultry manure (PM) composting. Five different concentration of chicken manure biochar (CMB) at 0%, 2%, 4%, 6%, and 10% on a dry weight basis was applied with initial feedstock (poultry manure + wheat straw) and indicated with T1, T2, T3, T4, and T5. In addition, high-throughput sequencing, principal coordinate analysis, and correlation analysis were used to analyze the evolution of HMRB communities during composting. The study indicated that crucial phyla were Proteobacteria, Actinobacteria, Bacteroidetes, and Firmicutes. The bacterial diversity in the CMB amendment treatment was higher than in the control treatment, and T4 treatment has the highest among all CMB applied treatments. Moreover, results from CCA indicated that T4 and T5 treatments quickly enters the high-temperature period which is maintained for 5 days, and is significantly positively correlated with Proteobacteria, and Actinobacteria. These findings offer insight into potential strategies to understand the succession of HMRBs during PM reuse. Overall, the above results show the addition of 6% biochar (T4) was potentially beneficial to enrich the abundance of bacterial community to improve composting environment quality and composting efficiency. In addition, effective to immobilized the heavy metals and HMRB in the end product.

Assessment of resistance and biosorption ability of Lactobacillus paracasei to remove lead and cadmium from aqueous solution

Since heavy metals have been regarded as ubiquitous environmental pollutants, the exploitation of bacterial biosorption has been suggested as an applicable method for being employed for heavy metal depletion. The present study aimed to characterize the function of Lactobacillus paracasei in the presence of Pb (II) and Cd (II). The simultaneous effect of pH, initial metal concentration, and inoculum size demonstrated the Pb (II) removal of 85.77% at the lowest pH, while the inoculum size was enhanced to 45 CFU/100 ml. The maximum Cd (II) removal was obtained at a high level of pH and inoculum size, while the metal concentration was reduced to 30 ppb. The addition of Cd (II) concentration in access led to the 10% drop in Cd (II) removal efficiency attributed to the metal toxicity and pH. Additionally, the slight variation in the amount of inoculum size caused the decreasing trend in the Cd (II) removal. According to the obtained results, the benefit of L. paracasei in the biosorption of heavy metals was well-recognized, which could be suggested as an alternative candidate. PRACTITIONER POINTS: Strain of Lactobacillus paracasei as potential probiotics was tested for biosorption. A successful response surface method was proposed. L. paracasei showed a good efficiency for the lead and cadmium biosorption. Biosorption process was effective in removing low metal level from drinking water. The maximum biosorption was found to be 85.77% for Pb (II) obtained from the experiment.

Proliferation of antibiotic-resistant microorganisms and associated genes during composting: An overview of the potential impacts on public health, management and future

Antibiotic residues together with non-antibiotic drugs and heavy metals act as a selective pressure for the spread of antibiotic-resistant microorganisms (ARMs), antibiotic-resistant genes (ARGs), and mobile genetic elements (MGEs) during composting of livestock manure. ARMs, ARGs and MGEs have become emerging contaminants since they are regularly implicated in the majority of compost produced from livestock manure. The prevalence of these contaminants in agricultural soil receiving compost has drawn huge attention globally due to the risks they pose to the total environment. Although a large body of literature exists on the application of composting methods in minimizing the relative abundance of these contaminants, there is a paucity of information on the robustness, limitations and opportunities and threats of various composting protocols currently deployed. To address this knowledge gap, the current review compiled literature on the origin and mechanisms of the proliferation of ARMs, ARGs, and MGEs during composting of livestock manure. The effectiveness of current composting protocols in the reduction or removal of emerging contaminants was evaluated. Furthermore, the potential environmental impacts and human health risks of these contaminants following land application of compost were also presented. Finally, we propose some strategic approaches for the reduction of ARGs and MGEs during composting of livestock manure.

Comparative research on selective adsorption of Pb(II) by biosorbents prepared by two kinds of modifying waste biomass: Highly-efficient performance, application and mechanism

In this study, we used xanthate to modify two waste biomass materials (corn cob and chestnut shell) and prepared them as biosorbents in one step for effectively removing Pb(II) from aqueous solutions containing only Pb(II) or Pb(II), Cu(II) and Cd(II). The two biosorbents were characterized by SEM, EDS, FTIR and Zeta potential analysis, and the results of the characterization were used to explore the adsorption mechanism of Pb(II) on biosorbents. We compare the Pb(II) removal ability of the two biosorbents and the investigated factors that affect Pb(II) removal. The results show that the adsorption capacity of xanthate modified corn cob (X-CC) and xanthate modified chestnut shell (X-CS) for Pb(II) is related to pH, reaction time, temperature and initial concentrations of both adsorbent and adsorbate. The adsorption of Pb(II) on X-CC and X-CS follows Langmuir isotherm equation and quasi-secondary kinetic equation, and their fitted q_m values are 166.39 and 124.84 mg g^-1, respectively. The analysis shows that the biosorbent has high selectivity to Pb(II) rather than Cu(II) and Cd(II), and still maintains a high removal rate of Pb(II) in actual wastewater. The biosorbents remove metal ions mainly through ion exchange reaction and the functional group in the material complexes with the metal to form micro-precipitation. The high adsorption capacity in aqueous solution and low costs in the manufacturing process of the present biosorbents ensure that they have great potential in practical applications for treating heavy-metal contaminated surface water.

Coupling Plant Biomass Derived from Phytoremediation of Potential Toxic-Metal-Polluted Soils to Bioenergy Production and High-Value by-Products—A Review

Phytoremediation is an attractive strategy for cleaning soils polluted with a wide spectrum of organic and inorganic toxic compounds. Among these pollutants, heavy metals have attracted global attention due to their negative effects on human health and terrestrial ecosystems. As a result of this, numerous studies have been carried out to elucidate the mechanisms involved in removal processes. These studies have employed many plant species that might be used for phytoremediation and the obtention of end bioproducts such as biofuels and biogas useful in combustion and heating. Phytotechnologies represent an attractive segment that is increasingly gaining attention worldwide due to their versatility, economic profitability, and environmental co-benefits such as erosion control and soil quality and functionality improvement. In this review, the process of valorizing biomass from phytoremediation is described; in addition, relevant experiments where polluted biomass is used as feedstock or bioenergy is produced via thermo- and biochemical conversion are analyzed. Besides, pretreatments of biomass to increase yields and treatments to control the transfer of metals to the environment are also mentioned. Finally, aspects related to the feasibility, benefits, risks, and gaps of converting toxic-metal-polluted biomass are discussed.

Can biochar regulate the fate of heavy metals (Cu and Zn) resistant bacteria community during the poultry manure composting?

In this study, the influence of coconut shell biochar addition (CSB) on heavy metals (Cu and Zn) resistance bacterial fate and there correlation with physicochemical parameters were evaluated during poultry manure composting. High-throughput sequencing was carried out on five treatments, namely T1-T5, where T2 to T5 were supplemented with 2.5%, 5%, 7.5% and 10% CSB, while T1 was used as control for the comparison. The results of HMRB indicated that the relative abundance of major potential bacterial host altered were Firmicutes (52.88-14.32%), Actinobacteria (35.20-4.99%), Bacteroidetes (0.05-15.07%) and Proteobacteria (0.01-20.28%) with elevated biochar concentration (0%-10%). Beta and alpha diversity as well as network analysis illustrated composting micro-environmental ecology with exogenous additive biochar to remarkably affect the dominant resistant bacterial community distribution by adjusting the interacting between driving environmental parameters with potential host bacterial in composting. Ultimately, the amendment of 7.5% CSB into poultry manure composting was able to significantly reduce the HMRB abundance, improve the composting efficiency and end product quality.

Selective pressures of heavy metals on microbial community determine microbial functional roles during composting: Sensitive, resistant and actor

Heavy metals (HM) pollution exerts an effect on microbial community composition and structure during composting, the way how microbial community responses to HM pressure is remain poorly understood though. The aim of this study was to explore functional roles of microorganisms based on selective pressures of HM (Cu, Zn and Cd). The results of microbial resistance showed that the toxicity of metals to microorganisms were Cu > Zn > Cd during composting. Cu and Zn were more toxic for microorganisms during composting when compared with Cd. However, microorganisms had a longer lag period to grow under Zn stress through microbial tolerance determination. In addition, the microbial catalase activity generally decreased and protease activity generally increased, thus microorganisms became more adaptable to HM stress during composting. The experimental results confirmed the existence of sensitive, resistant and actor microorganisms during beef cattle and chicken manures composting. Ultimately, the resistant, sensitive and actor microorganisms at genus level were distinguished under HM pressure based on the network analysis and structural equation models, including 85 resistant microorganisms, 5 sensitive microorganisms and 6 actor microorganisms. This would be helpful to understand the microbial succession process under HM stress and identify functional strains of HM remediation.

Synergistic effect of biofilm growth and cadmium adsorption via compositional changes of extracellular matrix in montmorillonite system

The interaction of bacterial biofilm and clay minerals provides great potential for heavy metal remediation in contaminated soil, yet, little is known about how heavy metal, clay minerals and their combinations affect the bacterial biofilm performance and heavy metal adsorption. In this study, the response of biofilm development as well as Cd²⁺ adsorption in the presence of Cd²⁺ and montmorillonite has been deciphered. Low concentrations of Cd²⁺ and montmorillonite or their combinations enhanced biofilm formation by increasing polysaccharides proportion in the biofilm matrix, and the maximum adsorption capacity of Cd²⁺ by biofilm was increased by 1.5 times. Furthermore, the immobilization of Cd²⁺ by soil was significantly improved when S14-biofilm was introduced. Such results could gain deeper insight into bacterial survival tactics in the complex systems which makes major contribution to microbial remediation of heavy metal polluted environments.

Speciation, toxicity mechanism and remediation ways of heavy metals during composting: A novel theoretical microbial remediation method is proposed

Heavy metals (HM) pollution is a major limitation to the application of composting products. Therefore, mitigating the toxicity of HM has attracted wide attention during composting. The toxicity of HM is mainly acted on microorganisms during composting, and the toxicity of different HM speciation is obviously various. There are many pathways to change the speciation to reduce the toxicity during composting. Therefore, in this review, the speciation distribution, toxicity mechanism and remediation ways of HM during composting were discussed in order to better solve HM pollution. The microbial remediation technology holds enormous potential to remediate for HM without damaging composting, however, it is hard to extract HM. The innovation of this review was to outline microbial remediation strategies for HM during composting based on two mechanisms of microbial remediation: extracellular adsorption and intracellular sequestration, to solve the problem how to extract microbial agents from the compost. Ultimately, a novel theoretical method of microbial remediation was proposed to remove HM from the compost.

Effect of Fenton pretreatment combined with bacteria inoculation on humic substances formation during lignocellulosic biomass composting derived from rice straw

The goal of this work was to explore the effect of Fenton pretreatment combined with bacteria inoculation on the formation of humic substances (HS) during rice straw composting. In this study, the compound bacterial agents were inoculated after Fenton pretreatment during rice straw composting. The results suggested that the coupling effects of Fenton pretreatment and bacteria inoculation promoted the humification process, which might be the reason of organic fractions degradation and transformation. In addition, the bacterial communities structure and diversity were changed by Fenton pretreatment and inoculation. Key microbial genera linking to the transformation of organic fractions were determined by network analysis. Redundancy analysis and structural equation model analysis indicated that Fenton pretreatment, inoculation, amino acid, soluble sugar and beta-diversity as the key factors affecting organic fractions transformation during composting. Therefore, the combined application Fenton pretreatment with bacteria inoculation provided a new method to promote the HS amount.

Metabolic function, trophic mode, organics degradation ability and influence factor of bacterial and fungal communities in chicken manure composting

The metabolic function and organic degradation behavior of bacterial and fungal communities were detected in 60 days composting of chicken manure and pumice by using Biolog tools, PICRUSt and FUNGuild. Fungal diversity increased from 57 OTUs in fresh chicken manure to 109 OTUs in high temperature stage, while bacterial diversity decreased from 86 OTUs to 44 OTUs after composting treatment. The carbohydrates degradation ability of bacterial community was enhanced in the high temperature stage. Fungal community had relatively higher degradation rates of carboxylic acids and amino acids in the maturation stage. Saprotroph was the main trophic mode of fungal community during the incubation process. The fungal animal pathogen decreased from 12.5% to 1.2% after composting treatment. Bacterial community composition and substrates degradation rate were mainly influenced by redox potential, pH and moisture, while temperature was the main environmental factor influencing on organic degradation of fungal community.

Effect of manganese dioxide on the formation of humin during different agricultural organic wastes compostable environments: It is meaningful carbon sequestration

The study aims to accelerate the formation of humin (HM) with the addition MnO₂ to achieve carbon sequestration during different material composting. The results indicated that the addition of MnO₂ could improve the concentration of HM by increasing of the content in functional groups during corn straw (CS) and chicken manure (CM) composting. With the addition of MnO₂, non-aromatic functional groups were responsible for the increase of the HM concentration in CM, while aromatic functional groups were dominating for CS. Although the formation mechanism of HM varied significantly across different materials, the MnO₂ promoted more abundant functional groups to participate the formation of recalcitrant fluorescence components in CS and CM. In addition, the aromatization of HM structure was improved by adding the MnO₂. Therefore, the addition of MnO₂ not only increase carbon sequestration but also increase the compost product resilience during the decompose of agricultural organic wastes.

Core microorganisms promote the transformation of DOM fractions with different molecular weights to improve the stability during composting

Transformation of DOM fractions with different molecular weights during composting of chicken manure (CM), garden waste (GW) and municipal solid waste (MSW) was evaluated in this study. The results revealed that DOM concentrations decreased by 49.8%, 53.9% and 86.4% during CM, GW and MSW composting, respectively. Meanwhile, low molecular weight (<650 Da) DOM was visibly transformed into high molecular weight (>10 kDa) DOM for enhancing their stability during composting. Core microorganisms promoting DOM stabilization were identified by network analysis, such as Prosthecobacter, Paenalcaligenes and Solibacillus. In addition, DOM composition was also related to the relative abundance of microbial metabolic function, such as chemoheterotrophy and aerobic chemoheterotrophy. Moreover, temperature, moisture and pH were identified as the key physicochemical factors affecting the DOM stabilization mediated by core microorganisms during composting. These above findings are helpful to regulate the DOM stabilization during composting and improve the quality of final composts.

Indirect effect of nutrient accumulation intensified toxicity risk of metals in sediments from urban river network

The levels of metals in sediments of urban river ecosystems are crucial for aquatic environmental health and pollution assessment. Yet little is known about the interaction of nutrients with metals for environmental risks under contamination accumulation. Here, we combined hierarchical cluster, correlation, and principal component analysis with structural equation model (SEM) to investigate the pollution level, source, toxicity risk, and interaction associated with metals and nutrients in the sediments of a river network in a city area of East China. The results showed that the pollution associated with metals in sediments was rated as moderate degree of contamination load and medium-high toxicity risk in the middle and downstream of urban rivers based on contamination factor, pollution load index, and environmental toxicity quotient. The concentration of mercury (Hg) and zinc (Zn) showed a significant correlation with toxic risks, which had more contribution to toxicity than other metals in the study area. Organic nitrogen and organic pollution index showed heavily polluted sediments in south of the study area. Though correlation analysis indicated that nutrients and metals had different input zones from anthropogenic sources in the urban river network, SEM suggested that nutrient accumulation indirectly intensified toxicity risk of metals by 13.6% in sediments. Therefore, we suggested the combined consideration of metal toxicity risk with nutrient accumulation, which may provide a comprehensive understanding to identify sediment pollution. Graphical abstract Toxicity rate of metals in sediments from urban river network indirectly intensified by nutrients accumulation.

Characteristics and Assessment of Toxic Metal Contamination in Surface Water and Sediments Near a Uranium Mining Area

Concentrations of potentially toxic metals including Cd, Cu, Pb, Cr, U, Th in surface water and sediment samples collected from a river were analyzed to assess the contaminations, distribution characteristics, and sources of these metals. The contents of the metals were lower than the standard levels set by World Health Organization (WHO) for drinking water. However, U and Th contents were far beyond the background values of surface water. The concentrations of Cd, Cr, and U in sediments were higher than the background values and the Probable Effect Level (PEL) of sediment quality guidelines (SQGs) which may result in high potential harmful biological effects to aquatic ecosystems. Based on the contamination factor (CF), geo-accumulation index (I_geo), and potential ecological risk index (RI), Cd, Cr, and U were considered to be the metals that mainly contribute to the contamination of sediments. The calculation results also indicated that the sites adjacent to the uranium ore field were highly polluted. Results of cluster analysis, principal component analysis, and correlation analysis revealed that Cr, Pb, U, and Th were highly correlated with each other. These metals mainly originated from both anthropogenic sources and natural processes, especially emissions from uranium mining and quarrying, whereas Cd mostly came from anthropogenic sources (agricultural activities) of the upper reaches of the river.

Role of NH3 recycling on nitrogen fractions during sludge composting

The aim of this study is to reduce nitrogen (N) loss and investigate the role of ammonia (NH₃) recycling on N fractions, environmental factors and bacterial communities. In this study, collected NH₃ from composting and recycled in it. The results showed that NH₃ recycling affected N-cycling processes such as nitrification. Redundancy Analyses (RDA) showed that NH₄⁺-N had significantly negative correlation with denitrifying bacteria in treatment group (p < 0.05), demonstrating that NH₃ recycling have influenced on the bacterial community structure. Furthermore, Structural Equation Model (SEM) revealed causal relationships between visual variables. Based on these results, we concluded that NH₃ recycling is a novel method to reduce N loss.

Roles of different humin and heavy-metal resistant bacteria from composting on heavy metal removal

This study aims to assess the roles of different humin and heavy-metal resistant bacterial community from composting on heavy metal removal. The results showed that the concentration of Cu²⁺, Zn²⁺, Ni²⁺, Pb²⁺, Cr³⁺ and Cd²⁺ decreased with adding the compost-derived humin, but the removal rates were relatively low (<30% on average). The heavy metal resistant bacteria from composting have better metal binding capacities than humin, and the combined addition of humin and bacteria could further stimulate the biosorption of heavy metals with 60-80% removal of metals and improve the diversity and biomass of bacterial community. There was obviously increased synergy between the humin from maturity phase and bacteria for metal biosorption ("1 + 1 > 2"). Structural equation modeling showed that microbial biomass and humin humification are the key factors for the biosorption of heavy metals. Combining humin from maturity phase with heavy-metal resistant bacteria was suggested to control heavy metal pollution in composts.

Driving effects of minerals on humic acid formation during chicken manure composting: Emphasis on the carrier role of bacterial community

This work was aimed to determine the effects of different minerals on humic acid (HA) formation. Minerals can stimulate the formation of complex compounds, however, whether they can promote the conversion of complex compounds to HA has not been verified. Four treatments were setup from chicken manure mixed with rice hull and then added biochar (BC), montmorillonite (MMT) and biochar combined with montmorillonite (BC-MMT) for composting, while the control check (CK) was composted without minerals. The results showed that HA concentration was increased by 28.09%, 40.79%, 45.39% and 38.96% during CK, BC, BC-MMT and MMT composting. However, the bacterial community was the main reason for affecting HA concentration. Network analysis showed that obligate and facultative core microbes drove HA formation, and these driving effects were affected by minerals. Therefore, the core bacterial community promoted HA formation, which provided an insightful method to improve HA production.

Biochar combined with montmorillonite amendments increase bioavailable organic nitrogen and reduce nitrogen loss during composting

This study aimed to compare the effects of biochar, montmorillonite and their mixture on nitrogen availability and nitrogen loss during chicken manure composting. Four lab-scale composting experiments, the control (CK), 5% biochar addition (BC), 5% montmorillonite addition (M) and 2.5% biochar + 2.5% montmorillonite addition (BCM), were established. Results showed that the addition of BC, M and BCM significantly improved the contents of bioavailable organic nitrogen and NH₄⁺-N in composts. In addition, BC and BCM reduced N loss by 19.2% and 12.2%, respectively, in comparison with CK. Significant shift of key bacterial communities associated with N transformation were also found in four treatments. Redundancy analysis and structural equation models indicated different additives changed the correlation among bacterial communities, environmental factors and organic N fractions. Comparison of N availability and N loss indicated that the combination of biochar and montmorillonite are more effective than that of separate application during composting.

Roles of adding biochar and montmorillonite alone on reducing the bioavailability of heavy metals during chicken manure composting

The aim of this study was to explore the effects of adding biochar and montmorillonite alone on the correlations between bacteria and bioavailability of heavy metals (HM) during chicken manure composting. Three composting experiments were conducted, containing the without ameliorant, 10% biochar and 10% montmorillonite. The results showed that biochar and montmorillonite ameliorants significantly reduced the bioavailability of Cu by 90.3%, 81.2%, while that of Zn by 11.7%, 15.6%, respectively. Meanwhile, they also significantly changed bacterial community structure and enhanced the correlation between bacterial bands (i.e., 19, 24, 26 and 30) and HM fractions. This correlation was validated in network analysis. Structural equation models further confirmed that bacteria had a complete and effective pathway to influence the bioavailability of HM. In summary, this study suggested that biochar and montmorillonite additions were an effective regulation method to reduce the bioavailability of HM from composting system.

Improved lignocellulose degradation efficiency based on Fenton pretreatment during rice straw composting

This study aims to explore the effect of Fenton pretreatment on organic fractions, enzymes activities and microbial communities during composting. In this study, rice straw was chosen to be composted after pretreatment. The results indicated that Fenton pretreatment significantly increased the degradation of organic matter and coarse fiber contents, which might be the reason that Fenton pretreatment enhanced lignocellulose-degrading enzymes activities during composting, including CMCase, FPase, xylanase, manganese peroxidase, lignin peroxidase and laccase. Additionally, Fenton pretreatment reshaped bacteria community. The key enzymes and environmental factors, which affected organic fractions degradation were identified by redundancy analysis. Furthermore, structural equation modeling and variation partitioning analysis further revealed possible mechanisms of organic fractions degradation in different treatments during composting. In summary, the combined application Fenton pretreatment and composting improved lignocellulose degradation efficiency, which provided for an effective and environment-friendly way to manage lignocellulose wastes.

Recognition of the neutral sugars conversion induced by bacterial community during lignocellulose wastes composting

The aim of this study was to explore the conversion characteristics of neutral sugars during different lignocellulose wastes composting from rice straw (RS), leaf (L) and mushroom dreg (MD). The results showed that the changes of neutral sugars were different during different wastes composting, but the changes of various hexose or pentose were similar during composting of the same material. The diversity of bacterial community led to different conversion characteristics of neutral sugars. During RS composting, each neutral sugar was transformed by a specific group of bacteria. However, a group of bacteria could transform multiple neutral sugars during MD and L composting. Furthermore, GM/AX value was first applied to composting, which could be used to characterize the conversion of neutral sugars during composting. This will help to provide more efficient recommendations for lignocellulose wastes treatment and accelerating humic substances synthesis during composting.