Simultaneous biohydrogen production from dark fermentation of duckweed and waste utilization for microalgal lipid production

Microalgae to bioenergy production: Recent advances, influencing parameters, utilization of wastewater - A critical review

Fossil fuel limitations and their influence on climate change through atmospheric greenhouse gas emissions have made the excessive use of fossil fuels widely recognized as unsustainable. The high lipid content, carbon-neutral nature and potential as a biofuel source have made microalgae a subject of global study. Microalgae are a promising supply of biomass for third-generation biofuels production since they are renewable. They have the potential to produce significant amounts of biofuel and are considered a sustainable alternative to non-renewable energy sources. Microalgae are currently incapable to synthesize algal biofuel on an extensive basis in a sustainable manner, despite their significance in the global production of biofuels. Wastewater contains nutrients (both organic and inorganic) which is essential for the development of microalgae. Microalgae and wastewater can be combined to remediate waste effectively. Wastewater of various kinds such as industrial, agricultural, domestic, and municipal can be used as a substrate for microalgal growth. This process helps reduce carbon dioxide emissions and makes the production of biofuels more cost-effective. This critical review provides a detailed analysis of the utilization of wastewater as a growth medium for microalgal - biofuel production. The review also highlights potential future strategies to improve the commercial production of biofuels from microalgae.

Strategies to enhance biohydrogen production from microalgae: A comprehensive review

Microalgae represent a promising renewable feedstock for the sustainable production of biohydrogen. Their high growth rates and ability to fix carbon utilizing just sunlight, water, and nutrients make them well-suited for this application. Recent advancements have focused on improving microalgal hydrogen yields and cultivation methods. This review aims to summarize recent developments in microalgal cultivation techniques and genetic engineering strategies for enhanced biohydrogen production. Specific areas of focus include novel microalgal species selection, immobilization methods, integrated hybrid systems, and metabolic engineering. Studies related to microalgal strain selection, cultivation methods, metabolic engineering, and genetic manipulations were compiled and analyzed. Promising microalgal species with high hydrogen production capabilities such as Synechocystis sp., Anabaena variabilis, and Chlamydomonas reinhardtii have been identified. Immobilization techniques like encapsulation in alginate and integration with dark fermentation have led to improved hydrogen yields. Metabolic engineering through modulation of hydrogenase activity and photosynthetic pathways shows potential for enhanced biohydrogen productivity. Considerable progress has been made in developing microalgal systems for biohydrogen. However, challenges around process optimization and scale-up remain. Future work involving metabolic modeling, photobioreactor design, and genetic engineering of electron transfer pathways could help realize the full potential of this renewable technology.

Heavy metals/-metalloids (As) phytoremediation with Landoltia punctata and Lemna sp. (duckweeds): coupling with biorefinery prospects for sustainable phytotechnologies

Heavy metals/-metalloids can result in serious human health hazards. Phytoremediation is green bioresource technology for the remediation of heavy metals and arsenic (As). However, there exists a knowledge gap and systematic information on duckweed-based metal phytoremediation in an eco-sustainable way. Therefore, the present review offers a critical discussion on the effective use of duckweeds (genera Landoltia and Lemna)-based phytoremediation to decontaminate metallic contaminants from wastewater. Phytoextraction and rhizofiltration were the major mechanism in 'duckweed bioreactors' that can be dependent on physico-chemical factors and plant-microbe interactions. The biotechnological advances such as gene manipulations can accelerate the duckweed-based phytoremediation process. High starch and protein contents of the metal-loaded duckweed biomass facilitate their use as feedstock in biorefinery. Biorefinery prospects such as bioenergy production, value-added products, and biofertilizers can augment the circular economy approach. Coupling duckweed-based phytoremediation with biorefinery can help achieve Sustainable Development Goals (SDGs) and human well-being.

A mini review on microwave and contemporary based biohydrogen production technologies: a comparison

Hydrogen gas, along with conventional fossil fuels, has been used as a green fuel with enormous potential. Due to the rapid depletion of fossil fuels, a new dimension of hydrogen production technology has arrived to reduce reliance on nonrenewable energy sources. Microwave-based hydrogen production is a more promising and cost-effective technology than other existing green hydrogen production methods such as fermentation and gasification. Microwave heating may be superior to traditional heating due to several advantages such as less power consumption compared to other methods, higher yield, and a higher rate of conversion. Compared to another process for hydrogen production, the microwave-driven process worked efficiently at lower temperatures by providing more than 70% yield. The process of production can be optimized by using properly sized biomass, types of biomass, water flow, temperature, pressure, and reactor size. This method is the most suitable, attractive, and efficient technique for hydrogen production in the presence of a suitable catalyst. Hot spots formed by microwave irradiation would have a substantial impact on the yield and properties of microwave-processed goods. The current techno-economic situation of various technologies for hydrogen production is discussed here, with cost, efficiency, and durability being the most important factors to consider. The present review shows that a cost-competitive hydrogen economy will necessitate continual efforts to increase performance, scale-up, technical prospects, and political backing.

Sustainable biohydrogen production from lignocellulosic biomass sources - metabolic pathways, production enhancement, and challenges

Hydrogen production from biological processes has been hailed as a promising strategy for generating sustainable energy. Fermentative hydrogen production processes such as dark and photofermentation are considered more sustainable and economical than other biological methods such as biophotolysis. However, these methods have constraints such as low hydrogen yield and conversion efficiency, so practical implementations still need to be made. The present review provides an assessment and feasibility of producing biohydrogen through dark and photofermentation techniques utilizing various lignocellulosic biomass wastes as substrates. Furthermore, this review includes information about the strategies to increase the productivity rate of biohydrogen in an eco-friendly and sustainable manner, like integration of dark and photofermentation techniques, pretreatment of biomass, genetic modification of microorganisms, and application of nanoadditives.

Dark fermentation and microalgae cultivation coupled systems: Outlook and challenges

The implementation of a sustainable bio-based economy is considered a top priority today. There is no doubt about the necessity to produce renewable bioenergy and bio-sourced chemicals to replace fossil-derived compounds. Under this scenario, strong efforts have been devoted to efficiently use organic waste as feedstock for biohydrogen production via dark fermentation. However, the technoeconomic viability of this process needs to be enhanced by the valorization of the residual streams generated. The use of dark fermentation effluents as low-cost carbon source for microalgae cultivation arises as an innovative approach for bioproducts generation (e.g., biodiesel, bioactive compounds, pigments) that maximizes the carbon recovery. In a biorefinery context, after value-added product extraction, the spent microalgae biomass can be further valorised as feedstock for biohydrogen production. This integrated process would play a key role in the transition towards a circular economy. This review covers recent advances in microalgal cultivation on dark fermentation effluents (DFE). BioH₂ via dark fermentation processes and the involved metabolic pathways are detailed with a special focus on the main aspects affecting the effluent composition. Interesting traits of microalgae and current approaches to solve the challenges associated to the integration of dark fermentation and microalgae cultivation are also discussed.

Fruit peel crude enzymes for enhancement of biohydrogen production from synthetic swine wastewater by improving biohydrogen-formation processes of dark fermentation

Biohydrogen is a promising clean fuel but with a low yield. This study aims to enhance biohydrogen production from synthetic swine wastewater by employing crude enzymes obtained from different fruit peels (orange, mandarin, and banana) to improve the biohydrogen-formation processes of dark fermentation. Results indicated that dosing with crude enzymes affected volatile fatty acids (VFAs) and biogas composition insignificantly, while increased biohydrogen yield from 1.62 ± 0.00 (blank) to 1.90 ± 0.08 (orange peel), 2.01 ± 0.00 (mandarin peel), and 1.96 ± 0.01 (banana peel) mol H₂/mol glucose, respectively. Banana peel crude enzyme was the most effective additive, with 1 g/L protein improving 97.41 ± 3.72 % of biohydrogen yield. The crude enzymes wielded less influence on acetic acid and butyric acid pathways but enhanced other biohydrogen production pathways. These observations demonstrated that fruit peel-based crude enzymes as additives are advantageous to improving biohydrogen yield towards higher biohydrogen production.

Duckweed Is a Promising Feedstock of Biofuels: Advantages and Approaches

With the growing scarcity of traditional sources of energy and the accompanying acute environmental challenges, biofuels based on biomass are favored as the most promising alternative. As one of the core raw materials for biomass energy, research on its production methods and synthesis mechanisms is emerging. In recent years, duckweed has been used as a high-quality new biomass feedstock for its advantages, including fast biomass accumulation, high starch content, high biomass conversion efficiency, and sewage remediation. This study provides a systematic review of the growth characteristics, starch metabolism pathways, and methods to improve starch accumulation in the new energy plant, duckweed. The study also presents a prospect that might be used as a reference for the development of duckweed as a new energy-providing plant.

Duckweed biorefinery - Potential to remediate dairy wastewater in integration with microbial protein production

The phytoremediation potential of Duckweed in treating dairy wastewater (DWW) was studied, focusing on its utilization as nutritional biomass. The process resulted in good treatment efficiency with removal of organic carbon of 74% (COD), nitrates of 66% and phosphates of 80%. The increase in duckweed fronds with time was observed (doubling time (DT) - 0.87) resulting in an overall dry weight of 3.73 g. The lentils showed 58% of protein, 29.5% of carbohydrate (with 20% of starch), 15.6% of lipid (FAME-29.3%-saturated, 40.7%-mono- and 30%-poly-unsaturated fatty acids) and good amino acid content (34.04% essential and 65.92% non-essential). The biomass hydrolysate (mild acid pretreated) served as a substrate for microbial protein (MP) production using Bacillus subtilis, resulting in 60% of protein (0.57 g protein/g COD consumed; 0.63 g protein/g N consumed) and 21% of carbohydrate. The duckweed biomass offers multiple benefits including nutritional supplement in food/feed for livestock and poultry industries along with concurrent wastewater treatment as well serves as potential feedstock for biorefinery.

Effects of temperature and total solid content on biohydrogen production from dark fermentation of rice straw: Performance and microbial community characteristics

Semi-continuous experiments were carried out in lab-scale continuous stirred tank reactors to evaluate the effects of fermentation temperature (37 ± 1 °C and 55 ± 1 °C) and total solids (TS) contents (3 %, 6 %, and 12 %) on biohydrogen production from the dark fermentations (DF) of rice straw (RS) and the total operation duration was 105 days. The experimental results show that biohydrogen production (0.46-63.60 mL/g VS_added) from the thermophilic (55 ± 1 °C) DF (TDF) was higher than the mesophilic (37 ± 1 °C) DF (MDF) (0.19-2.13 mL/g VS_added) at the three TS contents, and achieved the highest of 63.60 ± 2.98 mL/g VS_added at TS = 6 % in TDF. The pH, NH₄⁺-N and total volatile fatty acid of fermentation liquids in the TDF were all higher than those in the MDF. The high abundance of lactic acid-producing bacteria resulted in low biohydrogen produced at TS = 3 %. Under the TDF with TS = 6 %, the highest abundance of hydrolytic bacteria (Ruminiclostridium 54.24 %) led to the highest biohydrogen production. The increase of TS content from 6 % to 12 % induced degradation pathway changes from biohydrogen production to methane production. This study demonstrated that butyric acid fermentation was the main pathway to produce biohydrogen from RS in both DFs.

Palm oil industrial wastes as a promising feedstock for biohydrogen production: A comprehensive review

By the year 2050, it is estimated that the demand for palm oil is expected to reach an enormous amount of 240 Mt. With a huge demand in the future for palm oil, it is expected that oil palm by-products will rise with the increasing demand. This represents a golden opportunity for sustainable biohydrogen production using oil palm biomass and palm oil mill effluent (POME) as the renewable feedstock. Among the different biological methods for biohydrogen production, dark fermentation and photo-fermentation have been widely studied for their potential to produce biohydrogen by using various waste materials as feedstock, including POME and oil palm biomass. However, the complex structure of oil palm biomass and POME, such as the lignocellulosic composition, limits fermentable substrate available for conversion to biohydrogen. Therefore, proper pre-treatment and suitable process conditions are crucial for effective biohydrogen generation from these feedstocks. In this review, the characteristics of palm oil industrial waste, the process used for biohydrogen production using palm oil industrial waste, their pros and cons, and the influence of various factors have been discussed, as well as a comparison between studies in terms of types of reactors, pre-treatment strategies, the microbial culture used, and optimum operating condition have been presented. Through biological production, hydrogen production rates up to 52 L-H₂/L-medium/h and 6 L-H₂/L-medium/h for solid and liquid palm oil industrial waste, respectively, can be achieved. In short, the continuous supply of palm oil production by-product and relatively, the low cost of the biological method for hydrogen production indicates the potential source of renewable energy.

Biohydrogen from organic wastes as a clean and environment-friendly energy source: Production pathways, feedstock types, and future prospects

Microbial fermentation of organic matter under anaerobic conditions is currently the prominent pathway for biohydrogen production. Organic matter present in waste residues is regarded as an economic feedstock for biohydrogen production by dark and photo fermentative bacteria. Agricultural residues, fruit wastes, vegetable wastes, industrial wastewaters, and other livestock residues are some of the organic wastes most commonly used for biohydrogen production due to their higher organic content and biodegradability. Appropriate pretreatments are required to enhance the performance of biohydrogen from complex organic wastes. Biohydrogen production could also be enhanced by optimizing operation conditions and the addition of essential nutrients and nanoparticles. This review describes the pathways of biohydrogen production, discusses the effect of organic waste sources used and microbes involved on biohydrogen production, along with addressing the key parameters, advantages, and difficulties in each biohydrogen production pathway.

Emerging technologies for sustainable production of biohydrogen production from microalgae: A state-of-the-art review of upstream and downstream processes

Biohydrogen (BioH₂) is considered as one of the most environmentally friendly fuels and a strong candidate to meet the future demand for a sustainable source of energy. Presently, the production of BioH₂ from photosynthetic organisms has raised a lot of hopes in the fuel industry. Moreover, microalgal-based BioH₂ synthesis not only helps to combat current global warming by capturing greenhouse gases but also plays a key role in wastewater treatment. Hence, this manuscript provides a state-of-the-art review of the upstream and downstream BioH₂ production processes. Different metabolic routes such as direct and indirect photolysis, dark fermentation, photofermentation, and microbial electrolysis are covered in detail. Upstream processes (e.g. growth techniques, growth media) also have a great impact on BioH₂ productivity and economics, which is also explored. Technical and scientific obstacles of microalgae BioH₂ systems are finally addressed, allowing the technology to become more innovative and commercial.

Co-generation of biohydrogen and biochemicals from co-digestion of Chlorella sp. biomass hydrolysate with sugarcane leaf hydrolysate in an integrated circular biorefinery concept

BACKGROUND

A platform for the utilization of the Chlorella sp. biomass and sugarcane leaves to produce multiple products (biorefinery concept) including hydrogen, methane, polyhydroxyalkanoates (PHAs), lipid, and soil supplement with the goal to achieve the zero waste generation (circular economy) is demonstrated in this study. Microalgal biomass were hydrolyzed by mixed enzymes while sugarcane leaves were pretreated with alkali followed by enzyme. Hydrolysates were used to produce hydrogen and the hydrogenic effluent was used to produce multi-products. Solid residues at the end of hydrogen fermentation and the remaining acidified slurries from methane production were evaluated for the compost properties.

RESULTS

The maximum hydrogen yield of 207.65 mL-H₂/g-volatile solid (VS)_added was obtained from 0.92, 15.27, and 3.82 g-VS/L of Chlorella sp. biomass hydrolysate, sugarcane leaf hydrolysate, and anaerobic sludge, respectively. Hydrogenic effluent produced 321.1 mL/g-VS of methane yield, 2.01 g/L PHAs concentration, and 0.20 g/L of lipid concentration. Solid residues and the acidified slurries at the end of the hydrogen and methane production process were proved to have compost properties.

CONCLUSION

Hydrogen production followed by methane, PHA and lipid productions is a successful integrated circular biorefinery platform to efficiently utilize the hydrolysates of Chlorella sp. biomass and sugarcane leaf. The potential use of the solid residues at the end of hydrogen fermentation and the remaining acidified slurries from methane production as soil supplements demonstrates the zero waste concept. The approach revealed in this study provides a foundation for the optimal use of feedstock, resulting in zero waste.

Artificial intelligence modeling to predict transmembrane pressure in anaerobic membrane bioreactor-sequencing batch reactor during biohydrogen production

The complex nature of wastewater treatment has led to search for alternative strategies such as different artificial intelligence (AI) techniques to model the various operational parameters. The present work is aimed at predicting the transmembrane pressure (TMP) as a key operational parameter in the case of anaerobic membrane bioreactor-sequencing batch reactor (AnMBR-SBR) during biohydrogen production using the adaptive neuro-fuzzy inference systems (ANFIS) and artificial neural network (ANN). In both the models, organic loading rates (OLR) ranging from 0.5 to 8.0 g COD/L/d, effluent pH (3.6-6.9), mixed liquor suspended solid (4.6-21.5 g/L) and mixed liquor volatile suspended solid (3.7-15.5 g/L) were used as the input parameters to test TMP as an output parameter. The ANFIS model was trained using the hybrid algorithms for TMP prediction. The higher prediction performance was obtained by using the Gauss membership function with four membership numbers. A back-propagation algorithm was also employed for the feed forward training of ANN model; the best structure was a Levenberg-Marquardt training algorithm with nine neurons in the hidden layer. By employing ANFIS and ANN models, relatively a good prediction of TMP was obtained with the R² values of 0.93 and 0.88, respectively while the calculated mean square error for TMP in the ANFIS model (7.3 × 10^-3) was lower than that of ANN model (8.02 × 10^-3). The higher R² and lower MSE values for the ANFIS model exhibited a better TMP prediction performance than the ANN model. Finally, it was observed that in the sensitivity analysis of ANN model, OLR was the most important input parameter on the variation of TMP.

Main Hydrogen Production Processes: An Overview

Due to its characteristics, hydrogen is considered the energy carrier of the future. Its use as a fuel generates reduced pollution, as if burned it almost exclusively produces water vapor. Hydrogen can be produced from numerous sources, both of fossil and renewable origin, and with as many production processes, which can use renewable or non-renewable energy sources. To achieve carbon neutrality, the sources must necessarily be renewable, and the production processes themselves must use renewable energy sources. In this review article the main characteristics of the most used hydrogen production methods are summarized, mainly focusing on renewable feedstocks, furthermore a series of relevant articles published in the last year, are reviewed. The production methods are grouped according to the type of energy they use; and at the end of each section the strengths and limitations of the processes are highlighted. The conclusions compare the main characteristics of the production processes studied and contextualize their possible use.

Valorization of volatile fatty acids derived from low-cost organic waste for lipogenesis in oleaginous microorganisms-A review

To meet environmental sustainability goals, microbial oils have been suggested as an alternative to petroleum-based products. At present, microbial fermentation for oil production relies on pure sugar-based feedstocks. However, these feedstocks are expensive and are in limited supply. Volatile fatty acids, which are generated as intermediates during anaerobic digestion of organic waste have emerged as a renewable feedstock that has the potential to replace conventional sugar sources for microbial oil production. They comprise short-chain (C2 to C6) organic acids and are employed as building blocks in the chemical industry. The present review discusses the use of oleaginous microorganisms for the production of biofuels and added-value products starting from volatile fatty acids as feedstocks. The review describes the metabolic pathways enabling lipogenesis from volatile fatty acids, and focuses on strategies to enhance lipid accumulation in oleaginous microorganisms by tuning the ratios of volatile fatty acids generated via anaerobic fermentation.

Metabolic pathways for microalgal biohydrogen production: Current progress and future prospectives

Microalgal biohydrogen (bioH₂) has attracted global interest owing to its potential carbon-free source of sustainable renewable energy. Most of previous reviews which focused on microalgal bioH₂, have shown unclear differentiation among the metabolic pathways. In this review, investigation of all different metabolic pathways for microalgal bioH₂ production along with discussion on the recent research work of last 5-years have been considered. The major factors (such as light, vital nutrients, microalgal cell density, and substrate bioavailability) are highlighted. Moreover, effect of various pretreatment approaches on the constituent's bioaccessibility is reported. Microbial electrolysis cells as a new strategy for bioH₂ production is stated. Comparison between the operation conditions of various bioreactors and economic feasibility is also emphasized. Genetic, metabolic engineering, and synthetic biology as recent technologies improved the microalgal bioH₂ production through inactivation of uptake hydrogenase (H₂ase), inhibition of the competing pathways in polysaccharide synthesis, and improving the O₂ tolerant H₂ase.

Effective modelling of hydrogen and energy recovery in microbial electrolysis cell by artificial neural network and adaptive network-based fuzzy inference system

This study aims to analyze and model cathodic H₂ recovery (r_cat), coulombic efficiency (CE) with inputs of voltage, electrical conductivity (EC) and anode potential, and H₂ production rate and total energy recovery with inputs of r_cat and CE in a microbial electrolysis cell using artificial neural network (ANN) and adaptive network-based fuzzy inference system (ANFIS) procedures. Both ANN and ANFIS models demonstrated great goodness of fit for r_cat, CE, H₂ production rate and total energy recovery prediction with high R² values. The sum square error values for r_cat (0.0017), CE (0.0163), H₂ production rate (0.1062) and total energy recovery (0.0136) in ANN models were slightly higher than those in ANFIS models at 0.0005, 0.0091, 0.1247 and 0.0148 respectively. Sensitivity analysis by ANN models demonstrated that voltage, EC, r_cat and r_cat were the most effective factors for r_cat, CE, H₂ production rate and total energy recovery, respectively.