White and red LEDs as two-phase batch for cyanobacterial pigments production

Effects of light quality and intensity on phycobiliprotein productivity in two Leptolyngbya strains isolated from southern Bahia's Atlantic Forest

Cyanobacterial phycocyanin and phycoerythrin are gaining commercial interest due to their nutrition and healthcare values. This research analyzed the biomass accumulation and pigment production of two strains of Leptolyngbya under different combinations of light colors and intensities. The results showed that while Leptolyngbya sp.4 B1 (B1) produced all phycobiliproteins, Leptolyngbya sp.5 F2 (F2) only had phycocyanin and allophycocyanin. Both the color of the light and its light intensity affect the biomass accumulation and phycoerythrin concentration in strain B1. Although white light at medium intensity (50 μmol m-2 s-1) causes greater biomass accumulation (1.66 ± 0.13 gDW L-1), low-intensity (25 μmol m-2 s-1) green light induces lower biomass accumulation with twice the pigment content (87.70 ± 2.46 mg gDW -1), culminating in 71% greater productivity. In contrast, for the F2 strain, light intensity positively influenced biomass and pigment accumulation, being observed 2.25 ± 0.10 gDW L-1 under white light at 100 μmol m-2 s-1 and higher phycocyanin concentration (138.38 ± 3.46 mg gDW -1) under red light at 100 μmol m-2 s-1. These findings provide insights into optimizing the growth conditions by altering the intensity and wavelength of light for future production of phycocyanin and phycoerythrin from local cyanobacteria.

Traditional and new trend strategies to enhance pigment contents in microalgae

Microalgae are a source of a wide variety of commodities, including particularly valuable pigments. The typical pigments present in microalgae are the chlorophylls, carotenoids, and phycobiliproteins. However, other types of pigments, of the family of water-soluble polyphenols, usually encountered in terrestrial plants, have been recently reported in microalgae. Among such microalgal polyphenols, many flavonoids have a yellowish hue, and are used as natural textile dyes. Besides being used as natural colorants, for example in the food or cosmetic industry, microalgal pigments also possess many bioactive properties, making them functional as nutraceutical or pharmaceutical agents. Each type of pigment, with its own chemical structure, fulfills particular biological functions. Considering both eukaryotes and prokaryotes, some species within the four most promising microalgae groups (Cyanobacteria, Rhodophyta, Chlorophyta and Heterokontophyta) are distinguished by their high contents of specific added-value pigments. To further enhance microalgae pigment contents during autotrophic cultivation, a review is made of the main related strategies adopted during the last decade, including light adjustments (quantity and quality, and the duration of the photoperiod cycle), and regard to mineral medium characteristics (salinity, nutrients concentrations, presence of inductive chemicals). In contrast to what is usually observed for growth-related pigments, accumulation of non-photosynthetic pigments (polyphenols and secondary carotenoids) requires particularly stressful conditions. Finally, pigment enrichment is also made possible with two new cutting-edge technologies, via the application of metallic nanoparticles or magnetic fields.

Bioprospecting for industrially relevant exopolysaccharide-producing cyanobacteria under Portuguese simulated climate

Cyanobacterial exopolysaccharides (EPS) are potential candidates for the production of sustainable biopolymers. Although the bioactive and physicochemical properties of cyanobacterial-based EPS are attractive, their commercial exploitation is limited by the high production costs. Bioprospecting and characterizing novel EPS-producing strains for industrially relevant conditions is key to facilitate their implementation in various biotechnological applications and fields. In the present work, we selected twenty-five Portuguese cyanobacterial strains from a diverse taxonomic range (including some genera studied for the first time) to be grown in diel light and temperature, simulating the Portuguese climate conditions, and evaluated their growth performance and proximal composition of macronutrients. Synechocystis and Cyanobium genera, from marine and freshwater origin, were highlighted as fast-growing (0.1-0.2 g L-1 day-1) with distinct biomass composition. Synechocystis sp. LEGE 07367 and Chroococcales cyanobacterium LEGE 19970, showed a production of 0.3 and 0.4 g L-1 of released polysaccharides (RPS). These were found to be glucan-based polymers with high molecular weight and a low number of monosaccharides than usually reported for cyanobacterial EPS. In addition, the absence of known cyanotoxins in these two RPS producers was also confirmed. This work provides the initial steps for the development of cyanobacterial EPS bioprocesses under the Portuguese climate.

Cosmetic Potential of Pigments Extracts from the Marine Cyanobacterium Cyanobium sp

The current mindset in the cosmetics market about sustainable ingredients had increased the search for new sources of natural active ingredients. Cyanobacteria are a great source of functional ingredients for cosmetics, as a producer of pigments with described bioactive potential (carotenoids and phycobiliproteins). This work aimed to evaluate the cosmetic potential of marine cyanobacterium Cyanobium sp. pigment-targeted extracts (carotenoids and phycobiliproteins), evaluating their in vitro safety through cytotoxicity assays, cosmetic-related enzyme inhibition, ingredient stability, and putative product (serum formulation). Results showed no cytotoxicity from the extracts in skin-related cell lines. Carotenoid extract showed anti-hyaluronidase capacity (IC₅₀ = 108.74 ± 5.74 mg mL⁻¹) and phycobiliprotein extract showed anti-hyaluronidase and anti-collagenase capacity (IC₅₀ = 67.25 ± 1.18 and 582.82 ± 56.99 mg mL⁻¹, respectively). Regarding ingredient and serum stability, both ingredients showed higher stability at low-temperature conditions, and it was possible to maintain the pigment content and bioactive capacity stable during the tested period, although in higher temperatures the product was degraded in a week. As a major conclusion, both extracts can be potential natural and sustainable ingredients for cosmetic uses, with relatively simple formulation and storage, and can be promising natural anti-aging ingredients due to their bioactive capacity.

Light Modulation for Bioactive Pigment Production in Synechocystis salina

Cyanobacteria are microorganisms that are well-adapted to sudden changes in their environment, namely to light conditions. This has allowed them to develop mechanisms for photoprotection, which encompass alteration in pigment composition. Therefore, light modulation appears to be a suitable strategy to enhance the synthesis of specific pigments (e.g., phycocyanin) with commercial interest, in addition to conveying a more fundamental perspective on the mechanisms of acclimatization of cyanobacterium species. In this study, Synechocystis salina was accordingly cultivated in two light phase stages: (i) white LED, and (ii) shift to distinct light treatments, including white, green, and red LEDs. The type of LED lighting was combined with two intensities (50 and 150 µmol_photons·m⁻²·s⁻¹). The effects on biomass production, photosynthetic efficiency, chlorophyll a (chl a) content, total carotenoids (and profile thereof), and phycobiliproteins (including phycocyanin, allophycocyanin, and phycoerythrin) were assessed. White light (under high intensity) led to higher biomass production, growth, and productivity; this is consistent with higher photosynthetic efficiency. However, chl a underwent a deeper impact under green light (high intensity); total carotenoids were influenced by white light (high intensity); whilst red treatment had a higher effect upon total and individual phycobiliproteins. Enhanced PC productivities were found under modulation with red light (low intensities), and could be achieved 7 days earlier than in white LED (over 22 days); this finding is quite interesting from a sustainability and economic point of view. Light modulation accordingly appears to be a useful tool for supplementary studies pertaining to optimization of pigment production with biotechnological interest.

Biosynthesis and biotechnological interventions for commercial production of microalgal pigments: A review

Microalgae are photosynthetic eukaryotes that serve as microbial cell factories for the production of useful biochemicals, including pigments. These pigments are eco-friendly alternatives to synthetic dyes and reduce environmental and health risks. They also exhibit excellent anti-oxidative properties, making them a useful commodity in the nutrition and pharmaceutical industries. Light-harvesting pigments such as chlorophylls and phycobilins, and photoprotective carotenoids are some of the most common microalgal pigments. The increasing demand for these pigments in industrial applications has prompted a need to improve their metabolic yield in microalgal cells. So far, expensive cultivation methods and sensitivity to microbial contamination remain the main obstacles to the large-scale production of these pigments. This review highlights current issues and future prospects related to the production of microalgal pigments. The review also emphasizes the use of engineering approaches such as genetic engineering, and optimization of media components and physical parameters to increase their commercial-scale production.

Production, isolation and characterization of C-phycocyanin from a new halo-tolerant Cyanobacterium aponinum using seawater

A halo-tolerant Cyanobacterium aponinum PCC 10605 was applied for the first time to produce high-level C-phycocyanin (C-PC). Combined with chemical extraction with sodium phosphate buffer and physical treatment using high pressure homogenization, a higher titer of C-PC was achieved. The culture conditions were optimized by mixing nitrate and ammonia ions, 2% carbon dioxide, and conditional light intensity. Thus, strain PCC10605 produced the highest titer C-PC of 0.652 g/g-DCW in the N1A2 medium with 10% light intensity and 16:8 light-period on day 7. PCC10605 accumulated 0.51 g-CPC/g-DCW at 20 g/L NaCl, while it grew normally in seawater with 30 g/L salinity, thus confirmed that PCC10605 was halo-tolerant strain. Besides, PCC10605 survived in 0.12 g/L phosphate medium that has never been reported. Finally, the purified C-PC exhibited DPPH, superoxide scavenging activity and antibacterial activity, which displayed 87.6%, and 18.7% removal of free radical, and 1.98 cm of inhibition zone for Escherichia coli.

Continuous pressurized extraction versus electric fields-assisted extraction of cyanobacterial pigments

Cyanobacteria pigments, in special carotenoids and phycobiliproteins, are usually used in industry as raw extracts, although there is still no standard methodology for their extraction. For the co-extraction of carotenoids and phycobiliproteins from the marine cyanobacterium Cyanobium sp., a continuous pressurized solvent extraction (CPSE) system and an electric fields-assisted extraction system based in ohmic heating were optimized using Central Composite Designs, with three factors each: time (t), temperature (T) and, flow (f) for CPSE; and time, temperature and frequency (F) for ohmic heating. The content of pigments and the antioxidant capacity of extracts were evaluated. All tested factors seem to influence the extraction of pigments in different ways: a high temperature (70 °C) had a positive impact on the extraction rate in both methods, while the influence of time depended on the extraction principle. Flow and frequency affected directly the extraction efficiency and these methods are indeed suitable for cyanobacterial pigments extraction, achieving good extraction results. Optimal conditions for co-extraction of carotenoids and phycobiliproteins in CPSE were T = 70 °C, t = 20 min and f = 1.5 mL min^-1, and for ohmic heating they were T = 70 °C, t = 5 min and F = 20 kHz. Both, CPSE and ohmic heating systems allowed obtaining better extraction yields when compared with a previously optimized extraction method (homogenization), used here as a reference. However, ohmic heating was the best methodology for pigments co-extraction from Cyanobium sp.

Carotenoids from Cyanobacteria: Biotechnological Potential and Optimization Strategies

Carotenoids are tetraterpenoids molecules present in all photosynthetic organisms, responsible for better light-harvesting and energy dissipation in photosynthesis. In cyanobacteria, the biosynthetic pathway of carotenoids is well described, and apart from the more common compounds (e.g., β-carotene, zeaxanthin, and echinenone), specific carotenoids can also be found, such as myxoxanthophyll. Moreover, cyanobacteria have a protein complex called orange carotenoid protein (OCP) as a mechanism of photoprotection. Although cyanobacteria are not the organism of choice for the industrial production of carotenoids, the optimisation of their production and the evaluation of their bioactive capacity demonstrate that these organisms may indeed be a potential candidate for future pigment production in a more environmentally friendly and sustainable approach of biorefinery. Carotenoids-rich extracts are described as antioxidant, anti-inflammatory, and anti-tumoral agents and are proposed for feed and cosmetical industries. Thus, several strategies for the optimisation of a cyanobacteria-based bioprocess for the obtention of pigments were described. This review aims to give an overview of carotenoids from cyanobacteria not only in terms of their chemistry but also in terms of their biotechnological applicability and the advances and the challenges in the production of such compounds.

Effect of light colour and photoperiod on biomass growth and phycocyanin production by Synechococcus PCC 6715

The effect of light colour and light regime on growth and production of the thermostable C-phycocyanin (PC) by the thermophilic cyanobacterium Synechococcus 6715 in the tubular photobioreactor has been analysed. The highest specific growth rate (1.918 d-1) and biomass concentration (5.11 gVS ⋅L-1) were observed under constant illumination of the red light. However, the PC concentration in volatile solids (e.g blue light 30.68 ± 0.8 mgPC⋅gVS-1 PP and 21.7 ± 1 mgPC⋅gVS-1 CI) as well as per photobioreactor unit volume (e.g red light 122.66 ± 2.28 mgPC⋅L-1 PP and 74.71 ± 8.43 mgPC⋅L-1 PP) was higher in the 16L:8D photoperiod. The obtained PC purity was higher in the case of photoperiod (≈1.5). PCC6715 lacks genes encoding phycoerythrins what suggests T1 type of pigmentation. Although changes in biomass pigmentation were not significant, the strain was able to adapt its photosystem what can be used in the optimization of PC production by application of different light colours.

Exploitation of Filamentous and Picoplanktonic Cyanobacteria for Cosmetic Applications: Potential to Improve Skin Structure and Preserve Dermal Matrix Components

The use of natural products in skin care formulations gained interest as a concern for modern societies. The undesirable side effects of synthetic compounds, as well as the associated environmental hazards, have driven investigation on photosynthetic organisms as sustainable sources of effective and environmentally friendly ingredients. The use of natural extracts in cosmetics has been highlighted and, along with plants and algae, cyanobacteria have come into focus. Due to their low culture demands, high grow rates and ability to produce a wide variability of bioactive metabolites, cyanobacteria emerged as an economic and sustainable base for the cosmetic industry. In this study, we evaluated the potential of ethanol extracts of picocyanobacteria strains of the genera Cyanobium and Synechocystis and filamentous strains of the genera Nodosilinea, Phormidium and Tychonema for skin applications, with focus in the field of anti-aging. The extracts were analyzed for their pigment profile, phenolic content, antioxidant potential, cytotoxicity against keratinocytes (HaCat), fibroblasts (3T3L1), endothelial cells (hCMEC/D3) and capacity to inhibit hyaluronidase (HAase). The total carotenoid content ranged from 118.69 to 383.89 μg g⁻¹ of dry biomass, and the total phenolic content from 1.07 to 2.45 mg GAE g⁻¹. Identified carotenoids consisted of zeaxanthin, lutein, canthaxanthin, echinenone and β-carotene, with zeaxanthin and lutein being the most representative (49.82 and 79.08 μg g⁻¹, respectively). The highest antioxidant potential was found for Phormidium sp. LEGE 05292 and Tychonema sp. LEGE 07196 for superoxide anion radical (O₂^•−) scavenging (IC₅₀ of 822.70 and 924 μg mL⁻¹, respectively). Low or no cytotoxicity were registered. Regarding HAase inhibition, Tychonema sp. LEGE 07196 and Cyanobium sp. LEGE 07175 showed the best IC₅₀ (182.74 and 208.36 μg mL⁻¹, respectively). In addition, an increase in fibroblast proliferation was registered with these same strains. From this work, the ethanol extracts of the species Tychonema sp. and Cyanobium sp. are particularly interesting for their potential application in anti-aging formulations, once they stimulated fibroblast proliferation and inhibit hyaluronic acid digestion.

Exopolysaccharides from Cyanobacteria: Strategies for Bioprocess Development

Cyanobacteria have the potential to become an industrially sustainable source of functional biopolymers. Their exopolysaccharides (EPS) harbor chemical complexity, which predicts bioactive potential. Although some are reported to excrete conspicuous amounts of polysaccharides, others are still to be discovered. The production of this strain-specific trait can promote carbon neutrality while its intrinsic location can potentially reduce downstream processing costs. To develop an EPS cyanobacterial bioprocess (Cyano-EPS) three steps were explored: the selection of the cyanobacterial host; optimization of production parameters; downstream processing. Studying the production parameters allow us to understand and optimize their response in terms of growth and EPS production though many times it was found divergent. Although the extraction of EPS can be achieved with a certain degree of simplicity, the purification and isolation steps demand experience. In this review, we gathered relevant research on EPS with a focus on bioprocess development. Challenges and strategies to overcome possible drawbacks are highlighted.