An oxic/anoxic-integrated and Fe/C micro-electrolysis-mediated vertical constructed wetland for decentralized low-carbon greywater treatment

Effective remediation of agricultural drainage at three influent strengths by bioaugmented constructed wetlands filled with mixture of iron‑carbon and organic solid substrates: Performance and mechanisms

Agricultural drainage containing a large quantity of nutrients can cause quality deterioration and algal blooming of receiving water bodies, thus needs to be effectively remediated. In this study, iron‑carbon (FeC) composite-filled constructed wetlands (Fe-C-CWs) were employed to treat farmland drainage at three pollution levels, and organic solid substrates (walnut shells) and phosphate-accumulating denitrifying bacteria (Pseudomonas sp. DWP1) were supplemented to enhance the treatment performance. The results showed that the Fe-C-CWs exhibited notably superior removal efficiency for total nitrogen (TN, 52.0-58.2 %), total phosphorus (TP, 67.8-70.2 %) and chemical oxygen demand (COD, 56.7-70.4 %) than the control systems filled solely with gravel (28.5-32.5 % for TN, 33.2-40.5 % for TP and 30.2-55.0 % for COD) at all influent strengths, through driving autotrophic denitrification, Fe-based dephosphorization, and organic degradation processes. The addition of organic substrates and functional bacteria markedly enhanced pollutant removal in the Fe-C-CWs. Furthermore, use of FeC and organic substrates and denitrifier inoculation decreased CO2 and CH4 emissions from the CWs, and reduced global warming potential of the CWs at low influent strength. Pollutant removal efficiencies in the CWs were only marginally impacted by the increasing influent loads except for NO3--N, and pollutant removal mass was largely increased with the increase of influent strengths. The microbial community in the FeC composite-filled CWs exhibited distinct distribution patterns compared to the gravel-filled CWs regardless of the influent strengths, with obviously higher proportions of dominant genera Trichococcus, Geobacter and Ferritrophicum. Keystone taxa associated with pollutant removal in the Fe-C-filled CWs were identified to be Pseudomonas, Geobacter, Ferritrophicum, Denitratisoma and Sediminibacterium. The developed augmented Fe-C-filled CWs show great promises for remediating agricultural drainage with varied pollutant loads.

Recent advances and prospects of constructed wetlands in cold climates: a review from 2013 to 2023

Constructed wetland (CW), a promising, environmentally responsible, and effective green ecological treatment technology, is actively involved in the treatment of various forms of wastewater. Low temperatures will, however, lead to issues including plant dormancy, decreased microbial activity, and ice formation in CWs, which will influence how well CWs process wastewater. Applying CWs successfully and continuously in cold areas is extremely difficult. Therefore, it is crucial to find solutions for the pressing issue of increasing the CWs' ability to process wastewater at low temperatures. This review focuses on the effect of cold climate on CWs (plants, substrates, microorganisms, removal effect of pollutants). It meticulously outlines current strategies to enhance CWs' performance under low-temperature conditions, including modifications for the improvement and optimization of the internal components (i.e., plant and substrate selection, bio-augmentation) and enhancement of the external operation conditions of CWs (such as process combination, effluent recirculation, aeration, heat preservation, and operation parameter optimization). Finally, future perspectives on potential research directions and technological innovations that could strengthen CWs' performance in cold climates are prospected. This review aims to contribute valuable insights into the operation strategies, widespread implementation, and subsequent study of CWs in colder climate regions.

High rates of nitrogen removal in aerated VFCWs treating sewage through C-N-S cycle

The efficiency of deep aerated vertical flow constructed wetlands (DA-VFCWs) being operated in Hyderabad, India, was evaluated herein using physicochemical analysis and 16S rRNA amplicon sequencing. The results showed 2-4-fold higher removal rate coefficients for Biochemical oxygen demand (1.32---3.53 m/d) and nitrogen (0.88--1.36 m/d) in DA-VFCWs than those of passive VFCWs. Elevated sulfate concentration in the DA-VFCWs effluent (84-113 mg/L) indicated possibility of sulfur-driven autotrophic denitrification (SDAD) as a major pathway operating in these wetlands besides the classical nitrogen removal pathways. The presence of nitrifiers (3.09-10.02 %), heterotrophic and aerobic denitrifiers (0.79-0.83 %), anammox bacteria (1.31-2.22 %) and SDAD bacteria (0.08-0.73 %) in the biofilm samples collected from the DA-VFCWs exemplify an interplay of Carbon-Nitrogen-Sulfur cycles in these systems. If proven, the presence of an operational SDAD pathway in DA-VFCWs can help reduce surface area requirement in VFCWs substantially besides alleviating biological clogging of the wetland substrate.

Agricultural runoff treatment by constructed wetlands filled with iron-carbon composites in winter: Performance augmentation by organic solids and denitrifying bacteria addition

Iron-carbon composite-filled constructed wetlands (Fe-C CWs) were employed to treat agricultural runoff in the winter season in this study, and organic substrates and phosphate-accumulating denitrifying bacteria were supplemented to improve the treatment performance. Fe-C CWs performed significantly better in pollutant removal than the control system filled with only gravel by effectively driving autotrophic denitrification, Fe-based dephosphorization and organic degradation. Organic substrate and functional bacteria addition further augmented the performance, and immobilized bacterial cells were more effective than free cells. Fe-C and organic substrates decreased the greenhouse gas emission fluxes of the CWs, and denitrifier inoculation alleviated N2O emission. The microbial community in the Fe-C substrates showed a very distinct distribution pattern compared to that in the gravel, with notably higher proportions of Trichococcus, Thauera and Dechloromonas. Bioaugmented Fe-C-based CWs are highly promising for agricultural runoff treatment, especially at low temperatures.

Mining-related multi-resistance genes in sulfate-reducing bacteria treatment of typical karst nonferrous metal(loid) mine tailings in China

Management of tailings at metal mine smelter sites can reduce the potential hazards associated with exposure to toxic metal(loid)s and residual organic flotation reagents. In addition, microbes in the tailings harboring multi-resistance genes (e.g., tolerance to multiple antimicrobial agents) can cause high rates of morbidity and global economic problems. The potential co-selection mechanisms of antibiotic resistance genes (ARGs) and metal(loid) resistance genes (MRGs) during tailings sulfate-reducing bacteria (SRB) treatment have been poorly investigated. Samples were collected from a nonferrous metal mine tailing site treated with an established SRB protocol and were analyzed for selected geochemical properties and high throughput sequencing of 16S rRNA gene barcoding. Based on the shotgun metagenomic analysis, the bacterial domain was dominant in nonferrous metal(loid)-rich tailings treated with SRB for 12 months. KEGGs related to ARGs and MRGs were detected. Thiobacillus and Sphingomonas were the main genera carrying the bacA and mexEF resistance operons, along with Sulfuricella which were also found as the main genera carrying MRGs. The SRB treatment may mediate the distribution of numerous resistance genes. KOs based on the metagenomic database indicated that ARGs (mexNW, merD, sul, and bla) and MRGs (czcABCR and copRS genes) were found on the same contig. The SRB strains (Desulfosporosinus and Desulfotomaculum), and the acidophilic strain Acidiphilium significantly contributed to the distribution of sul genes. The functional metabolic pathways related to siderophores metabolism were largely from anaerobic genera of Streptomyces and Microbacterium. The presence of arsenate reductase, metal efflux pump, and Fe transport genes indicated that SRB treatment plays a key role in the metal(loid)s transformation. Overall, our findings show that bio-treatment is an effective tool for managing ARGs/MRGs and metals in tailings that contain numerous metal(loid) contaminants.

Non-filamentous sludge bulking induced by exopolysaccharide variation in structure and properties during aerobic granulation

The forming mechanism of non-filamentous sludge bulking during aerobic granulation were investigated basing on three feeding strategies (R1 direct aeration after fast feeding, R2 anaerobic stirring after fast feeding and R3 anaerobic plug-flow slow feeding). Results showed that strong selection stress (shortening settling time) led to a sharp flocs washout and the subsequent increase of food to microorganisms (F/M) in R1 and R3 reactors, but not found in R2 due to the different strategies of feeding modes. With the increase of F/M, zeta potential and hydrophobicity of sludge surfaces significantly decreased and thus leading to an enhanced repulsive force and energy barriers for sludge aggregation. Particularly, when F/M exceeded 1.2 kgCOD/(kgMLSS·d), non-filamentous sludge bulking was ultimately triggered in R1 and R3. Further analysis showed that massive extracellular exopolysaccharide (PS) accumulated on the surfaces of non-filamentous bulking sludge due to the increased abundance of the microorganisms related to PS secretion during sludge bulking. In addition, significantly increased intracellular second messenger (c-di-GMP), a key substance regulating PS biosynthesis, was confirmed via its concentration determination as well as microbial function prediction analysis, which played a critical role in sludge bulking. Combing with the systematic detection from surface plasmon resonance system, rheometer and size-exclusion chromatography-multiangle laser light detection-refractive index system, higher molecular weight, compact conformation, higher viscosity and higher hydrophilicity was determined in sludge bulking PS relative to PS extracted from non-filamentous bulking sludge. Clearly, the changes of PS (content, structures and properties) driven by c-di-GMP are the dominant mechanism for the formation of non-filamentous sludge bulking during aerobic granulation. This work could provide theoretical support for successful start-up and application of aerobic granular sludge technology.

Aerobic Denitrification Enhanced by Immobilized Slow-Released Iron/Activated Carbon Aquagel Treatment of Low C/N Micropolluted Water: Denitrification Performance, Denitrifying Bacterial Community Co-occurrence, and Implications

The key limiting factors in the treatment of low C/N micropolluted water bodies are deficient essential electron donors for nitrogen removal processes. An iron/activated carbon aquagel (IACA) was synthesized as a slowly released inorganic electron donor to enhance aerobic denitrification performance in low C/N micropolluted water treatment. The denitrification efficiency in IACA reactors was enhanced by more than 56.72% and the highest of 94.12% was accomplished compared with those of the control reactors. Moreover, the COD_Mn removal efficiency improved by more than 34.32% in IACA reactors. The Illumina MiSeq sequencing consequence explained that the denitrifying bacteria with facultative denitrification, iron oxidation, and iron reduction function were located in the dominant species niches in the IACA reactors (e.g., Pseudomonas, Leptothrix, and Comamonas). The diversity and richness of the denitrifying bacterial communities were enhanced in the IACA reactors. Network analysis indicated that aerobic denitrifying bacterial consortia in IACA reactors presented a more complicated co-occurrence structure. The IACA reactors presented the potential for long-term denitrification operation. This study affords a pathway to utilize IACA, promoting aerobic denitrification during low C/N micropolluted water body treatment.

Performance and mechanism of sacrificed iron anode coupled with constructed wetlands (E-Fe) for simultaneous nitrogen and phosphorus removal

Three anodic biofilm electrode coupled CWs (BECWs) with graphite (E-C), aluminum (E-Al), and iron (E-Fe), respectively, and a control system (CK) were constructed to evaluate the removal performance of N and P in the secondary effluent of wastewater treatment plants (WWTPs) under different hydraulic retention time (HRT), electrified time (ET), and current density (CD). Microbial communities, and different P speciation, were analyzed to reveal the potential removal pathways and mechanism of N and P in BECWs. Results showed that the optimal average TN and TP removal rates of CK (34.10% and 55.66%), E-C (66.77% and 71.33%), E-Al (63.46% and 84.93%), and E-Fe (74.93% and 91.22%) were obtained under the optimum conditions (HRT 10 h, ET 4 h, CD 0.13 mA/cm²), which demonstrated that the biofilm electrode could significantly improve N and P removal. Microbial community analysis showed that E-Fe owned the highest abundance of chemotrophic Fe(II) (Dechloromonas) and hydrogen autotrophic denitrifying bacteria (Hydrogenophaga). N was mainly removed by hydrogen and iron autotrophic denitrification in E-Fe. Moreover, the highest TP removal rate of E-Fe was attributed to the iron ion formed on the anode, causing co-precipitation of Fe(II) or Fe(III) with PO₄^3--P. The Fe released from the anode acted as carriers for electron transport and accelerated the efficiency of biological and chemical reactions to enhance the simultaneous removal of N and P. Thus, BECWs provide a new perspective for the treatment of the secondary effluent from WWTPs.

A novel constructed wetland based on iron carbon substrates: performance optimization and mechanisms of simultaneous removal of nitrogen and phosphorus

In recent years, the combination of iron carbon micro-electrolysis (ICME) with constructed wetlands (CWs) for removal of nitrogen and phosphorus has attracted more and more attention. However, the removal mechanisms by CWs with iron carbon (Fe-C) substrates are still unclear. In this study, the Fe-C based CW (CW-A) was established to improve the removal efficiencies of nitrogen and phosphorus by optimizing the operating conditions. And the removal mechanisms of nitrogen and phosphorus were explored. The results shown that the removal rates of COD, NH₄⁺-N, NO₃^--N, TN, and TP in CW-A could reach up to 84.4%, 94.0%, 81.1%, 86.6%, and 84.3%, respectively. Wetland plants and intermittent aeration have dominant effects on the removal of NH₄⁺-N, while the removal efficiencies of NO₃^--N, TN, and TP were mainly affected by Fe-C substrates, wetland plants, and HRT. XPS analysis revealed that Fe(0)/Fe²⁺ and their valence transformation played important roles on the pollutants removal. High-throughput sequencing results showed that Fe-C substrates and wetland plants had considerable impacts on the microbial community structures, such as richness and diversity of microorganism. The relative abundance of autotrophic denitrification bacteria (e.g., Denitatsoma, Thauera, and Sulfuritalea) increased in CW-A than CW-C. The electrons and H₂/[H] produced from Fe-C substrates were utilized by autotrophic denitrification bacteria for NO₃^--N reduction. Microbial degradation was the main removal mechanism of nitrogen in CW-A. Removal efficiency of phosphorus was enhanced resulted from the reaction of phosphate with iron ion. The application of CWs with Fe-C substrates and plants presented great potential for simultaneous removal of nitrogen and phosphorus.

Recent insights into greywater treatment: a comprehensive review on characteristics, treatment technologies, and pollutant removal mechanisms

With the rapid socio-economic and industrial development, the problem of water shortage is becoming increasingly serious. Seeking alternative water sources to reduce the need for freshwater resources is an increasing concern. Household greywater production is high and accounts for about 50-80% of domestic wastewater. In recent years, the in situ treatment and reuse of greywater have received widespread attention. Treated greywater can be used for non-potable purposes such as toilet flushing and irrigation, which can greatly reduce the pressure of freshwater resource shortage. This paper reviews the sources and characteristics of greywater and analyzes its quantity and quality. In addition, this paper outlines and summarizes various greywater treatment technologies commonly used, including physical, biological, and chemical treatment technologies, as well as combination technologies. Understanding the mechanisms of contaminant removal is essential for effective greywater treatment. While discussing different treatment technologies, we focus on the removal mechanisms of pollutants from greywater, including organics, nutrients, surfactants, and emerging contaminants. Finally, future perspectives on greywater management and reuse are presented. Through a comprehensive review, we expect that this review will help the reader to better understand the characteristics of greywater and to more rationally select the appropriate treatment technology based on the removal mechanism of pollutants.

Enhanced nitrogen removal in an electrochemically coupled biochar-amended constructed wetland microcosms: The interactive effects of biochar and electrochemistry

The interactive effects of both biochar (BC) and electrochemistry (EC) can affect nitrogen (N) removal process. However, little is known about how this function in constructed wetland (CW) systems. In this study, an electrochemically (EC) coupled BC-amended saturated subsurface vertical flow constructed wetland (BECW) systems were established to enhance nitrogen (N) removal. Other three CW systems: without BC and EC (CW); with EC only (ECW); and with BC only (BCW) were performed as controls. Results indicated that the total nitrogen (59.88%-93.03%) and nitrate‑nitrogen (83.14%-100%) of the BECW system were significantly enhanced (p < 0.05) compared with the control systems. Treated WWTP tail-water could meet Class-IV of the Surface Water Quality Standard (GB3838-2002) in China by the BECW system. The enhanced N removal in the BECW system could be attributed to (1) the autotrophic denitrification process in which H₂ and Fe²⁺ provided by the cathode and anode acted as electron donors; and (2) BC addition acting as substrate could improve the activity, diversity and richness of microorganisms. Microbial community analysis further indicated that high N removal in the BECW system was significantly dependent on the synergy between the heterotrophic and autotrophic denitrifiers, facilitated by BC and EC interaction. Results illustrate that the BECW system is a feasible and eco-sustainable technology for treating low C/N tail-water from WWTPs. This work provides a novel and fundamental understanding of the electrochemically coupled biochar-amended CW system. These results could serve as a theoretical basis for the engineered applications in the deep purification of WWTPs' tail-water.

Microbial community dynamic shifts associated with sulfamethoxazole degradation in microbial fuel cells

Though sulfamethoxazole (SMX) degradation at the low or medium concentration (SMX< 30 mg/L) has been reported in the microbial fuel cell (MFC), further exploration is still urgently required to investigate how the high concentration of SMX affect the anode biofilm formation. In this study, the degradation mechanism of SMX and the response of microbial community to SMX at different initial concentrations (0, 0.5, 5 and 50 mg/L) were investigated in MFCs. The highest SMX removal efficiency of 98.4% was obtained in MFC (5 mg/L). SMX at optimal concentration (5 mg/L) could serve as substrate accelerating the extracellular electron transfer. However, high concentration of SMX (50 mg/L) conferred significant inhibition on the electron transfer with SMX removal decline to 84.4%. The 16S rRNA high-throughput sequencing revealed the significant shift of the anode biofilms communities with different initial SMX concentrations were observed in MFCs. Thauera and Geobacter were the predominant genus, with relative abundance of 31.9% in MFC (50 mg/L SMX) and 52.7% in MFC (5 mg/L SMX). Methylophilus exhibited a huge increase with the highest percentage of 16.4% in MFC (50 mg/L). Hence, the functional bacteria of Thauera, Geobacter and Methylophilus endowed significant tolerance to the selection pressure from high concentration of SMX in MFCs. Meanwhile, some bacteria including Ornatilinea, Dechloromonas and Longilinea exhibited a decrease or even disappeared in MFCs. Therefore, initial concentrations of SMX played a fundamental role in modifying the relative abundance of predominant populations. This finding would promote theories support for understanding the evolution of anode biofilm formation related to the different initial concentrations of SMX in MFCs.

Biological stimulation with Fe(III) promotes the growth and aerobic denitrification of Pseudomonas stutzeri T13

Certain metal ions can contribute to the functional microorganisms becoming dominant by stimulating their metabolism and activity. Therefore, Pseudomonas stutzeri T13 was used to investigate the impacts of biological stimulation with certain metal ions on aerobic denitrifying bacteria. Results showed that with the addition of 0.036 mmol/L Fe³⁺ ions, the nitrogen-assimilation capacity of P. stutzeri T13 significantly increased by 43.99% when utilizing ammonium as the sole nitrogen source. Kinetic models were applied to analyze the role of Fe³⁺ ions in the growth, and results indicated that increasing Fe³⁺ ion concentrations decreased the decay rate. The maximum nitrate reduction rate increased from 9.55 mg-N L^-1 h^-1 to 19.65 mg-N L^-1 h^-1 with Fe³⁺ ion concentrations increasing from 0.004 to 0.036 mmol/L, which was due to the increased level of napA gene transcription and activity of nitrate reductase. This study provides a theoretical foundation for further understanding of the mechanism of Fe³⁺ ion stimulation of aerobic denitrification, benefiting the practicable application of aerobic denitrifiers.

Characteristics of microbial denitrification under different aeration intensities: Performance, mechanism, and co-occurrence network

This study aimed to explore how dissolved oxygen (DO) affected the characteristics and mechanisms of denitrification in mixed bacterial consortia. We analyzed denitrification efficiency, intracellular nicotinamide adenine dinucleotide (NADH), relative expression of functional genes, and potential co-occurrence network of microorganisms. Results showed that the total nitrogen (TN) removal rates at different aeration intensities (0.00, 0.25, 0.63, and 1.25 L/(L·min)) were 0.93, 1.45, 0.86, and 0.53 mg/(L·min), respectively, which were higher than previously reported values for pure culture. The optimal aeration intensity was 0.25 L/(L·min), at which the maximum NADH accumulation rate and highest relative abundance of napA, nirK, and nosZ were achieved. With increased aeration intensity, the amount of electron flux to nitrate decreased and nitrate assimilation increased. On one hand, nitrate reduction was primarily inhibited by oxygen through competition for electron donors of a certain single strain. On the other hand, oxygen was consumed rapidly by bacteria by stimulating carbon metabolism to create an optimal denitrification niche for denitrifying microorganisms. Denitrification was performed via inter-genus cooperation (competitive interactions and symbiotic relationships) between keystone taxa (Azoarcus, Paracoccus, Thauera, Stappia, and Pseudomonas) and other heterotrophic bacteria (OHB) in aeration reactors. However, in the non-aeration case, which was primarily carried out based on intra-genus syntrophy within genus Propionivibrio, the co-occurrence network constructed the optimal niche contributing to the high TN removal efficiency. Overall, this study enhanced our knowledge about the molecular ecological mechanisms of aerobic denitrification in mixed bacterial consortia and has theoretical guiding significance for further practical application.

Application of iron [Fe(0)]-rich substrate as a novel capping material for efficient simultaneous remediation of contaminated sediments and the overlying water body

Release of contaminants from sediments has been one of the main pollution sources causing eutrophication and malodorous black of ponds. In this study, an iron-rich substrate (IRS) was developed based on iron‑carbon micro-electrolysis and applied for simultaneous sediments and overlying water remediation. IRS obtained high ammonia and phosphate adsorption capacities (Langmuir isotherm) of 13.02 and 18.12 mg·kg^-1, respectively. In the 90-day long-term remediation, IRS reduced NH₄⁺-N, PO₄^3--P, organic-N, organic-P, TN and TP in overlying water by 48.6%, 97.9%, 34.2%, 67.1%, 53.2% and 90.4%, respectively. In sediments, IRS reduced NO₃^--N, NH₄⁺-N and organic-N by 98.5%, 26.5% and 6.3%, respectively. The unstable P-compounds (i.e., organic-P, Ca-bounded-P and labile-P) were effectively transferred (20.1%, 54.3% and 98.2%, respectively) into inert P-compounds (i.e., Fe-bounded-P and residual-P). Meanwhile, flux rates of nitrogen and phosphorus from sediments to overlying water were reduced from 7.02 to 4.92 mg·m^-2·d^-1 (by 29.9%) and from 7.42 to 2.21 mg·m^-2·d^-1 (by 70.2%), respectively. Due to micro-electrolysis, Fe²⁺/Fe³⁺/[H] were in-situ generated from IRS and NO₃^--N was effectively reduced. Additionally, the generation of O₂^· was promoted by Fe²⁺/[H] and strengthened the NH₄⁺-N, organic-N/P oxidation. Fe³⁺ enhanced the immobilization of PO₄^3- (e.g., as FePO₄·H₂O and Fe_nPO₄(OH)_3n-3). The released Fe²⁺/Fe³⁺ from IRS were finally stabilized as poorly reactive sheet silicate (PRS)-Fe and magnetite-Fe in the sediments and hardly showed side effect to sediments and water body. The developed IRS obtained advantages of high efficiency, ecologically safe and cost-effective in contaminated sediments and overlying water remediation.