Tetracycline inhibition and transformation in microbial fuel cell systems: Performance, transformation intermediates, and microbial community structure

Fabrication and optimization of bioelectrochemical system using tetracycline-degrading bacterial strains for antibiotic wastewater treatment

In this study, a microbial fuel cell was constructed using Raoultella sp. XY-1 to efficiently degrade tetracycline (TC) and assess the effectiveness of the electrochemical system. The degradation rate reached 83.2 ± 1.8 % during the 7-day period, in which the system contained 30 mg/L TC, and the degradation pathway and intermediates were identified. Low concentrations of TC enhanced anodic biofilm power production, while high concentrations of TC decreased the electrochemical activity of the biofilm, extracellular polymeric substances, and enzymatic activities associated with electron transfer. Introducing electrogenic bacteria improved power generation efficiency. A three-strain hybrid system was fabricated using Castellaniella sp. A3, Castellaniella sp. A5 and Raoultella sp. XY-1, leading to the enhanced TC degradation rate of 90.4 % and the increased maximum output voltage from 200 to 265 mV. This study presents a strategy utilizing tetracycline-degrading bacteria as bioanodes for TC removal, while incorporating electrogenic bacteria to enhance electricity generation.

Degradation of tetracycline under a wide pH range in a heterogeneous photo bio-electro-fenton system using FeMn-LDH/g-C3N4 cathode: Performance and mechanism

The widespread use of antibiotics and the inefficiency of traditional degradation treatments pose threats to the environment and human health. Previous studies have reported the potential of bio-electro-Fenton (BEF) processes for antibiotic removal. However, some drawbacks, such as a strict pH range of 2-3 and iron sludge generation, limit their large-scale application. Thus, to overcome the narrow pH range of traditional BEF processes, a photo-BEF (PBEF) system was established using a novel FeMn-layered double hydroxide (LDH)/graphitic carbon nitride (g-C3N4) (FM/CN) composite cathode. The performance of the PBEF system was investigated by degrading tetracycline (TC) under low-power LED lamp irradiation. The results indicated that the pH range of the PBEF system could be expanded to 3-11 using an FM/CN cathode, which exhibited a TC removal efficiency of 63.0%-75.9%. The highest TC removal efficiency was achieved at pH 7. The efficient mineralization of TC by the PBEF system can be high, up to 67.6%. In addition, the TC removal mechanism was discussed in terms of reactive oxygen species, TC degradation intermediate analyses, and density functional theory (DFT) calculations. Strong oxidative hydroxyl radicals (·OH) were the dominant reactive oxidizing species in the PBEF system, followed by ·O2- and h+. Three pathways of TC degradation were proposed based on the analysis of intermediates, and the reactive sites attacked by electrophilic reagents were explored using DFT modeling. In addition, the overall toxicity of TC degradation intermediates effectively decreased in the PBEF system. This work offers deep insights into the TC removal mechanisms and performance of the PBEF system over a wide pH range of 3-11.

A miniaturized biosensor for rapid detection of tetracycline based on a graphene field-effect transistor with an aptamer modified gate

Tetracycline is a broad-spectrum antibiotic for human, poultry and livestock that may cause health damage when enriched in humans. Therefore, it is essential to create a rapid tetracycline assay with high sensitivity, specificity and portability. In this study, a miniaturized tetracycline biosensor based on aptamer-modified graphene field-effect transistor (Apt-SGGT) was fabricated and two detection strategies using transfer characteristic curves and real-time channel current were established for different circumstances. The detection limits of the two strategies were 2.073 pM and 100 pM, respectively. The biosensor also demonstrated outstanding stability, anti-interference and specificity ability. Finally, the biosensor was employed to detect the content of tetracycline in Skim Milk with outstanding recovery rate. We believe that the miniaturized Apt-SGGT biosensor with appropriate detection strategies will provide an ideal portable sensing platform for many important analytes in food with superior selectivity and sensitivity.

Improving oxygen reduction reaction by cobalt iron-layered double hydroxide layer on nickel-metal organic framework as cathode catalyst in microbial fuel cell

Cobalt Iron -layered double hydroxide (CoFe-LDH) nano sheets were attached to Nickel-metal organic frameworks (Ni-MOF) by utilizing hydrothermal reaction method, and CoFe-LDH@Ni-MOF was synthesized and worked as the cathode catalyst in microbial fuel cell. The surface of this composite material provided generous electrochemical active sites, consisting of wrinkled strips of CoFe-LDH adhering to a lamellar structure of Ni-MOF. In terms of the maximum output power density, CoFe-LDH@Ni-MOF as the catalyst was 211 mW/m2, 2.54 times higher than that of Ni-MOF (83 mW/m2), and it was stable at about 225 mV for 150 h. CoFe-LDH@Ni-MOF showed high oxygen reduction reaction capability and high specific surface area, and the electron transfer rate was accelerated. This work might set the stage for the development and utilization of fuel cell cathode catalysts.

Effect of microplastics on the degradation of tetracycline in a soil microbial electric field

The degradation of organic pollutants and the adsorption of organic pollutants onto microplastics (MPs) in the environment have recently been intensively studied, but the effects of biocurrents, which are widespread in various soil environments, on the environmental behavior of MPs and antibiotic pollutants have not been reported. In this study, it was found that polylactic acid (PLA) and polyvinyl chloride (PVC) MPs accelerated the mineralization of humic substances in microbial electrochemical systems (MESs). After tetracycline (TC) was introduced into the MESs, the internal resistance of the soil MESs decreased. Additionally, the presence of MPs enhanced the charge output of the soil MESs by 40% (PLA+TC) and 18% (PVC+TC) compared with a control group without MPs (424 C). The loss in MP mass decreased after TC was added, suggesting a promotion of TC degradation rather than MP degradation for charge output. MPs altered the distribution of the highest occupied molecular orbitals and lowest unoccupied molecular orbitals of TC molecules and reduced the energy barrier for the TC hydrolysis reaction. The microbial community of the plastisphere exhibited a greater ability to degrade xenobiotics than the soil microbial community, indicating that MPs were hotspots for TC degradation. This study provides the first glimpse into the influence of MPs on the degradation of TC in MESs, laying a theoretical and methodological foundation for the systematic evaluation of the potential risks of environmental pollutants in the future.

Enhanced MFC sensor performances and extracellular electron transport efficiency mediated by biochar and underlying biochemical mechanisms

To explore the application of biosensor in real-time monitoring of composite heavy metal polluted wastewater in view of the low performance of MFC sensor, this study used sodium alginate to immobilize biochar to the anode of MFC biosensor, and conducted a study on the sensor performance and related biological processes. The results showed that under the optimal HRT conditions, the output power of the MFC-sensor (BC-300) was 0.432 W/m³ after biochar modification, which was much higher than the highest power density of CG and BC-0 of 0.117 and 0.088 W/m³. The correlation coefficient was greater than that of the control group at the plating wastewater concentration of 0.1-1.0 M and had a wider detection range, and the time to recover the output voltage was 1/3 of that of the control group. The biochar significantly promoted the sensitivity, interference resistance, recovery and anti-interference performance of the MFC-sensor. The intrinsic mechanism was that the composition and structure of biochar lead to a 1.53 fold increase in the abundance of electrogenic microorganisms and the abundance of functional genes such as cytochrome c (MtrABC, CymA, Cox, etc.) and flavin (riba, Rib B, gdh, ushA, IDH, etc.) increased by about 1.03-3.20 times, which promoted the shift of electrons from intracellular to extracellular receptors and significantly improved the electron transfer and the energy metabolism efficiency. The results of this study can provide a reference for the application of MFCsensor to the detection of complex heavy metal effluents.

Antimicrobial and the Resistances in the Environment: Ecological and Health Risks, Influencing Factors, and Mitigation Strategies

Antimicrobial contamination and antimicrobial resistance have become global environmental and health problems. A large number of antimicrobials are used in medical and animal husbandry, leading to the continuous release of residual antimicrobials into the environment. It not only causes ecological harm, but also promotes the occurrence and spread of antimicrobial resistance. The role of environmental factors in antimicrobial contamination and the spread of antimicrobial resistance is often overlooked. There are a large number of antimicrobial-resistant bacteria and antimicrobial resistance genes in human beings, which increases the likelihood that pathogenic bacteria acquire resistance, and also adds opportunities for human contact with antimicrobial-resistant pathogens. In this paper, we review the fate of antimicrobials and antimicrobial resistance in the environment, including the occurrence, spread, and impact on ecological and human health. More importantly, this review emphasizes a number of environmental factors that can exacerbate antimicrobial contamination and the spread of antimicrobial resistance. In the future, the timely removal of antimicrobials and antimicrobial resistance genes in the environment will be more effective in alleviating antimicrobial contamination and antimicrobial resistance.

Sustainable conversion of antibiotic wastewater using microbial fuel cells: Energy harvesting and resistance mechanism analysis

In this study, tetracycline (TC) can be degraded in microbial fuel cells (MFCs) rapidly and efficiently for the synergistic effect of microbial metabolism and electrical stimulation. Different TC concentrations had different effects on the bioelectric performance of MFCs. Among them, 10 mg/L TC promoted the bioelectric properties of MFCs, the maximum power density reached 1744.4 ± 74.9 mW/cm². In addition, we demonstrated that Geobacter and Chryseobacterium were the dominant species in the anode biofilm, while Azoarcus and Pseudomonas were the prominent species in the effluent, and the initial TC concentration affected the microbial community composition. Furthermore, the addition of TC increased the relative abundance of aadA3, sul1, adeF, cmlA, and tetC in reactors, indicating that a single antibiotic could promote the expression of self-related resistance as well as the expression of other ARGs. Moreover, the presence of TC can increase the relative content of mobile genetic elements (MGEs) and greatly increase the risk of antibiotic resistance genes (ARGs) spreading. Meanwhile, network analysis revealed that some microorganisms (such as Acidovorax caeni, Geobacter soil, and Pseudomonas thermotolerans) and MGEs may be potential hosts for multiple ARGs.

MoS2 nanosheets embedded in α-FeOOH as an efficient cathode for enhanced MFC-electro-Fenton performance in wastewater treatment

Microbial fuel cell-electro-Fenton system (MEF) has attracted attention due to refractory organic pollutants removal, where H₂O₂ is in-situ produced without external energy supply. Enhancement of H₂O₂ production and the activation of H₂O₂ to ·OH are the keys to improve degradation performance. Development of bifunctional catalytic cathode is a viable strategy. Herein, the α-FeOOH/MoS₂ nanocomposites was fabricated by a novel facile hydrothermal method based on molybdenite-exfoliated MoS₂ nanosheets suspension, which was used as modified cathode in a MEF system. The obtained α-FeOOH/1 wt%MoS₂ cathode exhibited highest power density of 292.38 mW/m², which was about 3.7 and 1.7 times higher than that of graphite plate and α-FeOOH, respectively. Doping of MoS₂ nanosheets significantly enhanced electrocatalytic activity of the cathode and promoted in-situ H₂O₂ generation. Meanwhile, the exposed reductive Mo⁴⁺ on the surface of MoS₂ could greatly facilitate the conversion cycle of Fe(III)/Fe(II), leading to the efficient activation of H₂O₂ into ·OH. The MEF with α-FeOOH/1 wt%MoS₂ cathode exhibited excellent degradation and mineralization performance for MB, rhodamine B and tetracycline hydrochloride at optimized reaction condition. Furthermore, the MEF can simultaneously achieve MB oxidation and Cr(VI) reduction, and the corresponding removal ratio can reach up to 91.45% and 100%, respectively. Based on simple preparation method as well as recyclability and excellent catalytic property, the α-FeOOH/MoS₂ composite catalyst is considered as a promising MEF cathode for efficient wastewater treatment.

Hydrolyzed polyacrylamide biotransformation during the formation of anode biofilm in microbial fuel cell biosystem: Bioelectricity, metabolites and functional microorganisms

The anode biofilm serves as the core dominating the performance of microbial fuel cell (MFC) biosystem. This research provides new insights into hydrolyzed polyacrylamide (HPAM) biotransformation during the formation of anode biofilm. The current density, coulombic efficiency, voltage, power density, volatile fatty acid (VFA) production and total nitrogen (TN) removal enhanced with the thickening of biofilm (1-6 cm), and the maximums achieved 146 mA·m^-2, 47.3%, 8.76 V, 1.28 W·m^-2, 184 mg·L^-1 and 84.6%, respectively. HPAM concentration descended from 508 mg·L^-1 to 83.3 mg·L^-1 after 60 days. HPAM was metabolized into VFAs, N₂, NO₂^--N and NO₃^--N, thereby releasing electrons. Laccase and tyrosine/tryptophan protein induced HPAM metabolism and bioelectricity production. The microbial functions involving HPAM biotransformation and bioelectricity generation were clarified. The alternative resource recovery, techno-economic comparison and development direction of MFC biosystem were discussed to achieve the synchronization of HPAM-containing wastewater treatment and bioelectricity generation based on MFC biosystem.

Effect of tetracycline on bio-electrochemically assisted anaerobic methanogenic systems: Process performance, microbial community structure, and functional genes

Bio-electrochemically assisted anaerobic methanogenic systems (An-BES) are highly effective in wastewater treatment for methane production and degradation of toxic compounds. However, information on the treatment of antibiotic-bearing wastewater in An-BES is still very limited. This study therefore investigated the effect of tetracycline (TC) on the performance, microbial community, as well as functional and antibiotic resistance genes of An-BES. TC at 1 and 5 mg/L inhibited methane production by less than 4.8% compared to the TC-free control. At 10 mg/L TC, application of 0.5 and 1.0 V decreased methane production by 14 and 9.6%, respectively. Under the effect of 1-10 mg/L TC, application of 1.0 V resulted in a decrease of current from 42.3 to 2.8 mA. TC was mainly removed by adsorption; its removal extent increased by 19.5 and 32.9% with application of 0.5 and 1.0 V, respectively. At 1.0 V, current output was not recovered with the addition of granular activated carbon, which completely removed TC by adsorption. Metagenomic analysis showed that propionate oxidizing bacteria and methanogens were more abundant in electrode biofilms than in suspended culture. Antibiotic resistance genes (ARGs) were less abundant in biofilms than in suspended culture, regardless of whether voltage was applied or not. Application of 1.0 V resulted in the enrichment of Geobacter in the anode and Methanobacterium in the cathode. TC inhibited exoelectrogens, propionate oxidizing bacteria, and the methylmalonyl CoA pathway, leading to a decrease of current output, COD consumption, and methane production. These findings deepen our understanding of the inhibitory effect of TC in An-BES towards efficient bioenergy recovery from antibiotic-bearing wastewater, as well as the response of functional microorganisms to TC in such systems.

Antibiotic removal and antibiotic resistance genes fate by regulating bioelectrochemical characteristics in microbial fuel cells

Antibiotics removal and ARGs control in microbial fuel cell (MFC) has received extensive attention. In particular, the critical role of bioelectrochemical characteristics deserves further study. Bioelectrochemical characteristics significantly affected sulfamethoxazole (SMX) removal and ARGs fate, in which the current intensity played a more critical role than anode potential. High-concentration SMX (2 mg/L and 10 mg/L) facilitated the anode potential tend to be close, and thus, the strengthening effect of current on the system was highlighted. However, the SMX degradation pathway under different bioelectrochemical characteristics was not affected. Furthermore, the higher current intensity was preferable to antibiotic removal, but unfavorable for ARGs control might be due to the oxidative stress on microorganisms. Low-concentration SMX (0.5 mg/L) contributed to improving higher electricity generation because of Geobacter enrichement. This study suggested that appropriate bioelectrochemical characteristics regulation in MFCs was essential in removing antibiotics and controlling ARGs.

Enhanced electricity generation and tetracycline removal of bioelectro-Fenton with electroactive biofilm induced by multi external resistance

A simple multi electric resistance mode is used to regulate electroactive anode film, which improves the electricity generation, H₂O₂ production and pollutants removal. This external electron transport path (double cathode with different resistance) exhibits higher H₂O₂ production (571.9 ± 0.1 mg m^-2 h^-1), tetracycline removal (71.4 ± 0.4% to 50 mg L^-1), and power (615.3 ± 9.9 mW m^-2 plus 680.6 ± 10.3 mW m^-2), which is 75.4%, 23.1% and 1.25 times higher than that of single cathode mode. The double cathode improves the relative abundance of Geobacter (exoelectrogens), which is 9.45 times higher than that of single cathode mode. The anodic capacitance of double cathode mode is more than 10 times higher than that of single cathode mode. Electrons (generate by exoelectrogens) participate in two- (cathodic chamber) and four- (anodic chamber) electron reaction at cathode surface, and facilitates electricity generation of bioelectro-Fenton. The removal rate of double cathode mode is 342.7 mg L^-1 d^-1 (50 mg L^-1 tetracycline) and 170.1 mg L^-1 d^-1 (20 mg L^-1 tetracycline), which is much higher than that of reported. These results indicate that external electron transport path enhances the electrochemical activity of anode film and performance of bioelectro-Fenton. This paper provides a new power supply method for the future practical application and field experiment of bioelectrio-Fenton.

Current advances in microbial fuel cell technology toward removal of organic contaminants - A review

At present, water pollution and demand for clean energy are most pressing global issues. On a daily basis, huge quantity of organic wastes gets released into the water ecosystems, causing health related problems. The need-of-the-hour is to utilize proficient and cheaper techniques for complete removal of harmful organic contaminants from water. In this regard, microbial fuel cell (MFC) has emerged as a promising technique, which can produce useful electrical energy from organic wastes and decontaminate polluted water. Herein, we have systematically reviewed recently published results, observations and progress made on the applications of MFCs in degradation of organic contaminants, including organic synthetic dyes, agro pollutants, health care contaminants and other organics (such as phenols and their derivatives, polyhydrocarbons and caffeine). MFC-based hybrid technologies, including MFC-constructed wetland, MFC-photocatalysis, MFC-catalysis, MFC-Fenton process, etc., developed to obtain high removal efficiency and bioelectricity production simultaneously have been discussed. Further, this review assessed the influence of factors, such as nature of electrode catalysts, organic pollutants, electrolyte, microbes and operational conditions, on the performance of pristine and hybrid MFC reactors in terms of pollutant removal efficiency and power generation simultaneously. Moreover, the limitations and future research directions of MFCs for wastewater treatment have been discussed. Finally, a conclusive summary of the findings has been outlined.

Profiling of co-metabolic degradation of tetracycline by the bio-cathode in microbial fuel cells

In this paper, a system of tetracycline (TEC) degradation by the bio-cathode in a microbial fuel cell (MFC) was constructed. Overall, the co-metabolic degradation performance of TEC was studied through single factor experiments and the ecological risk was evaluated using the E. coli growth inhibition rate and resistance genes. High throughput sequencing (HTS) was utilized to profile the biofilm community structure of the bio-cathode. Results showed that the degradation rate of TEC reached greater than 90% under optimal conditions, which was 10 mg L⁻¹ initial TEC concentration, 0.2–0.7 g L⁻¹ sodium acetate concentration and 12–18 L h⁻¹ aeration. Furthermore, compared with the aerobic biodegradation of TEC, the degradation efficiency of the MFC bio-cathode for TEC was significantly increased by 50% and the eco-toxicity of TEC after 36 hour degradation was reduced by 60.9%, and TEC ARGs in effluent were cut down. HTS results showed that electrochemically active bacteria Acetobacter and TEC-resistant degradation bacteria Hyphomicrobium, Clostridium and Rhodopseudomonas were the main dominant bacteria in the cathode biofilm. Besides, based on 5 intermediates, degradation pathways involving deamidation, denitro dimethylation, dedimethylation and dehydroxylation of TEC were proposed. The degradation of TEC on the bio-cathode was mainly caused by microbial co-metabolism action. This study would enrich the study of MFC bio-cathodic degradation of antibiotics in water.

In this paper, a system of tetracycline (TEC) degradation by the bio-cathode in a microbial fuel cell (MFC) was constructed.

Plant microbial fuel cell: Opportunities, challenges, and prospects

Microbial fuel cells (MFCs) are considered as greener technologies for generation of bioenergy and simultaneously treatment of wastewater. However, the major drawback of these technologies was, rapid utilization of substrate by the microbes to generate power. This drawback is solved to a great extent by plant microbial fuel cell (PMFC) technology. Therefore, this review critically explored the challenges associated with PMFC technology and approaches to be employed for making it commercially feasible, started with brief introduction of MFCs, and PMFCs. This review also covered various factors like light intensity, carbon dioxide concentration in air, type of plant used, microbial flora in rhizosphere and also electrode material used which influence the efficiency of PMFC. Finally, this review comprehensively revealed the possibility of future intervention, such as application of biochar and preferable plants species which improve the performance of PMFC along with their opportunities challenges and prospects.