Effects of biological pretreatments of microalgae on hydrolysis, biomethane potential and microbial community

Magnetic biochar enhanced microbial electrolysis cell with anaerobic digestion for complex organic matter degradation in landfill leachate

Combining microbial electrolytic cells with anaerobic digestion (MEC-AD) was considered as an important method for enhancing complex organic matter degradation. However, the magnetic biochar (MBC) addition would be an effective approach for enhancing biodegradation in MEC-AD. By designing orthogonal experiments, the optimal parameters of MBC-enhanced MEC-AD system for landfill leachate treatment were determined. The results indicated that the optimal conditions were identified as HRT of 72 h, electrode spacing of 2.5 cm, and applied voltage of 0.8 V. Under these conditions, the COD removal efficiency reached a maximum of 54.7 %. Additionally, the UV-vis, 3D-EEM, and GC-MS indicated the macromolecules 13-Docosenamide (Z), Bis(2-ethylhexyl) benzene-1,4-dicarboxylate and bis(2-ethylhexyl) phthalate were degraded. 13-Docosenamide (Z) was almost completely removed under the conditions of 0.8 V applied voltage, 2.5 cm electrode spacing and 24 h HRT, with a removal efficiency of 99.91 %. Significant differences were observed in the microbial core genera among the MEC-AD systems. The core genera in the anodic and cathodic biofilms were primarily fermentative and electroactive bacteria, including Soehngenia (2.2 % - 32.1 %, 3.2 % - 26.4 %) and Desulfomicrobium (1.1 % - 10.2 %, 2.0 % - 29.3 %). Fermentative bacteria, norank_f__Bacteroidetes_vadinHA17, established cooperative relationships with electroactive bacteria Acinetobacter. The enrichment of electrochemically active bacteria optimized microbial interactions, thereby synergistically enhancing the biotransformation of complex organic matter in landfill leachate.

Advancements in sustainable production of biofuel by microalgae: Recent insights and future directions

Microalgae is considered as sustainable and viable feedstock for biofuel production due to its significant advantages over terrestrial plants. Algal biofuels have received significant attention among researchers and energy experts owing to an upsurge in global energy issues emanating from depletion in fossil fuel reserves increasing greenhouse gases emission conflict among agricultural crops, traditional biomass feedstock, and potential futuristic energy security. Further, the exploration of value-added microalgae as sustainable and viable feedstock for the production of variety of biofuels such as biogas, bio-hydrogen, bioethanol, and biodiesel are addressed. Moreover, the assessment of life-cycle, energy balance, and environmental impacts of biofuel production from microalgae are briefly discussed. The present study focused on recent advancements in synthetic biology, metabolic engineering tools, algal bio refinery, and the optimization of algae growth conditions. This paper also elucidates the function of microalgae as bio refineries, the conditions of algae-based cultures, and other operational factors that must be adjusted to produce biofuels that are price-competitive with fossil fuels.

Insight into response mechanism of short-chain fatty acids to refined microbial transformation order of dissolved organic matter ranked by molecular weight during dry anaerobic digestion

Dynamic transformation of dissolved organic matter (DOM) contributes to short-chain fatty acids (SCFAs) production during anaerobic digestion. However, the impact of refined transformation of DOM ranked by molecular weight (MW) on SCFAs has never been investigated. Results indicated that DOM conversion order was 3500-7000 Da>(MW>14000 Da) > 7000-4000 Da during hydrolysis stage, while it was independent of their MW in acidogenesis phase and followed a low to high MW order during methanogenesis stage. Proteins-like DOMs with different MW were closely related to SCFAs. Eight groups of microorganisms (e.g., Bacillus and Caldicoprobacter) responsible for the conversion of proteins-like DOMs to SCFAs. The possible routes linking environmental properties to microorganisms-proteins-like DOMs-SCFAs connections were constructed. Microbial activity modifications by regulating moisture, pH, NO3--N and NH4+-N can expedite the conversion of proteins-like DOMs to SCFAs. The study emphasizes the importance of MW-classification-based biotransformation of organic waste, offering a potential strategy to enhance anaerobic digestion performance.

Enhanced microbial electrosynthesis performance with 3-D algal electrodes under high CO2 sparging: Superior biofilm stability and biocathode-plankton interactions

Microbial electrosynthesis (MES) shows great promise for converting CO2 into high-value chemicals. However, cathode biofilm erosion by high CO2 sparging and the unclear role of plankton in MES hinders the continuous improvement of its performance. This study aims to enhance biofilm resistance and improve interactions between bio-cathode and plankton by upgrading waste algal biomass into 3-D porous algal electrode (PAE) with rough surface. Results showed that the acetate synthesis of PAE under 20 mL/min CO2 sparging (PAE-20) was up to 3330.61 mol/m3, 4.63 times that of carbon felt under the same conditions (CF-20). The microbial loading of PAE-20 biofilm was twice that of CF-20. Furthermore, higher cumulative abundance of functional microorganisms was observed in plankton of PAE-20 (55 %), compared to plankton of CF-20 (14 %), and enhanced biocathode-plankton interactions significantly suppressed acetate consumption. Thus, this efficient and sustainable 3-D electrode advances MES technology and offers new perspectives for waste biomass recycling.

Enhancement of microbial community dynamics and metabolism in compost through ammonifying cultures inoculation

The efficient use of livestock and poultry manure waste has become a global challenge, with microorganisms playing an important role. To investigate the impact of novel ammonifying microorganism cultures (NAMC) on microbial community dynamics and carbon and nitrogen metabolism, five treatments [5% (v/w) sterilized distilled water, Amm-1, Amm-2, Amm-3, and Amm-4] were applied to cow manure compost. Inoculation with NAMC improved the structure of bacterial and fungal communities, enriched the populations of the functional microorganisms, enhanced the role of specific microorganisms, and promoted the formation of tight modularity within the microbial network. Further functional predictions indicated a significant increase in both carbon metabolism (CMB) and nitrogen metabolism (NMB). During the thermophilic phase, inoculated NAMC treatments boosted carbon metabolism annotation by 10.55%-33.87% and nitrogen metabolism annotation by 26.69%-63.11. Structural equation modeling supported the NAMC-mediated enhancement of NMB and CMB. In conclusion, NAMC inoculation, particularly with Amm-4, enhanced the synergistic interaction between bacteria and fungi. This collaboration promoted enzymatic catabolic and synthetic processes, resultng in positive feedback loops with the endogenous microbial community. Understanding these mechanisms not only unravels how ammonifying microorganisms influence microbial communities but also paves the way for the development of the composting industry and global waste management practices.

Evaluating the potential of different bioaugmented strains to enhance methane production during thermophilic anaerobic digestion of food waste

Bioaugmentation technology for improving the performance of thermophilic anaerobic digestion (TAD) of food waste (FW) treatment is gaining more attention. In this study, four thermophilic strains (Ureibacillus suwonensis E11, Clostridium thermopalmarium HK1, Bacillus thermoamylovorans Y25 and Caldibacillus thermoamylovorans QK5) were inoculated in the TAD of FW system, and the biochemical methane potential (BMP) batch study was conducted to assess the potential of different bioaugmented strains to enhance methane production. The results showed that the cumulative methane production in groups inoculated with E11, HK1, Y25 and QK5 improved by 2.05%, 14.54%, 19.79% and 9.17%, respectively, compared with the control group with no inoculation. Moreover, microbial community composition analysis indicated that the relative abundance of the main hydrolytic bacteria and/or methanogenic archaea was increased after bioaugmentation, and the four strains successfully became representative bacterial biomarkers in each group. The four strains enhanced methane production by strengthening starch, sucrose, galactose, pyruvate and methane metabolism functions. Further, the correlation networks demonstrated that the representative bacterial genera had positive correlations with the differential metabolic functions in each bioaugmentation group. This study provides new insights into the TAD of FW with bioaugmented strains.

Determination of effects of thermophilic and hyperthermophilic temperatures on anaerobic hydrolysis and acidogenesis of pig manure through a one-year study

Improving hydrolysis and acidogenesis through thermophilic and hyperthermophilic temperatures is critical for enhancing the anaerobic decomposition of organic waste like pig manure. However, whether higher temperatures can provide more enhanced performance has not been elucidated experimentally. This study, therefore, conducted a 375-day continuous operation experiment at 55 and 70 °C with a 5-day hydraulic retention time. The two temperature reactors entered a stable state after about 200 days and long-term microbial acclimation markedly changed their performances. In the thermophilic and hyperthermophilic reactor, the hydrolysis efficiencies were obtained at 29.7 % and 27.3 % respectively, whereas the acidogenesis efficiency was relatively low at 1.0 % and 3.1 %. Due to the occurrence of methanogenesis, the volatile fatty acid concentration in the thermophilic reactor was only 45 % of that in the hyperthermophilic reactor. The thermophilic reactor exhibited higher bacterial diversity; however, this difference between the two reactors apparently did not correlate with hydrolysis and acidogenesis performance.

Evolution of aniline degradation and nitrogen removal performance in electro-enhanced sequence batch reactor under salinity stress: Sludge characteristics and microbial diversity

To explore the influence mechanism of different concentrations of salinity on the electro-enhanced aniline biodegradation system, a control group and experimental groups (0%-NaCl, 0.5%-NaCl, 1.5%-NaCl, 2.5%-NaCl, 3.5%-NaCl) were established. The experimental results showed that the electric field strengthened the denitrification performance, while salinity had little effect on the degradation efficiency of aniline and chemical oxygen demand (COD). The removal rate of TN reached 79.6% and 74.9% in 0.5%-NaCl and 1.5%-NaCl, respectively, which were superior than 0%-NaCl. As salinity increased, the nitrogen removal effect was negatively affected. Microbial diversity analysis indicated that the microbial community structure was uniform in the control group, 0%-NaCl, and 0.5%-NaCl, with the dominant genus OLB8 ensuring the nitrogen removal performance. In contrast, in the 2.5%-NaCl and 3.5%-NaCl experimental groups, the organic degrading bacteria were still active, while nitrifiers and denitrifiers were severely damaged. In conclusion, this study suggested that low concentrations of salinity can improve the decontamination performance of the electro-enhanced aniline biodegradation system, while high concentrations of salinity could lead to the collapse of the decontamination mechanism.

R, Choudhary S, Singh R, Verma AK. Optimization of biogas potential using kinetic models, response surface methodology, and instrumental evidence for biodegradation of tannery fleshings during anaerobic digestion

The optimization of the batch size experiment was run for a hydraulic retention time of 45 days using proteolytic enzyme pretreatment. The highest amounts of biogas were produced in comparison to conventional BDS (25:75), which is not processed with enzymes, and there was an increase in the biogas generation of 13.9 and 18.57%. The kinetic models show the goodness of fit between 0.993 and 0.998 and the correlation coefficient's value domain was [-1, 1] from a statistical perspective. The Box-Behnken design was carried out using the response surface methodology at different levels of independent parameters to optimize the process. Different instruments were evaluated to determine the chemical structure change and the contamination of the different treatments and the raw sample of tannery fleshings was determined. Thermogravimetric analysis was conducted to determine the loss of weight on thermal degradation. The Fourier transform infrared spectrometry was carried out to determine the different functional groups, such as -OH, -CH, -NH, and C-O, present in the samples of tannery fleshings. Scanning electron microscopy and energy dispersive X-ray analysis were carried out to determine the morphological alterations in the substrate, digestate, enzyme-pretreated fleshings, and the chemical composition of samples.

Response of the soil microbial community to petroleum hydrocarbon stress shows a threshold effect: research on aged realistic contaminated fields

Introduction

Microbes play key roles in maintaining soil ecological functions. Petroleum hydrocarbon contamination is expected to affect microbial ecological characteristics and the ecological services they provide. In this study, the multifunctionalities of contaminated and uncontaminated soils in an aged petroleum hydrocarbon-contaminated field and their correlation with soil microbial characteristics were analyzed to explore the effect of petroleum hydrocarbons on soil microbes.

Methods

Soil physicochemical parameters were determined to calculate soil multifunctionalities. In addition, 16S high-throughput sequencing technology and bioinformation analysis were used to explore microbial characteristics.

Results

The results indicated that high concentrations of petroleum hydrocarbons (565-3,613 mg•kg^-1, high contamination) reduced soil multifunctionality, while low concentrations of petroleum hydrocarbons (13-408 mg•kg^-1, light contamination) might increase soil multifunctionality. In addition, light petroleum hydrocarbon contamination increased the richness and evenness of microbial community (p < 0.01), enhanced the microbial interactions and widened the niche breadth of keystone genus, while high petroleum hydrocarbon contamination reduced the richness of the microbial community (p < 0.05), simplified the microbial co-occurrence network, and increased the niche overlap of keystone genus.

Conclusion

Our study demonstrates that light petroleum hydrocarbon contamination has a certain improvement effect on soil multifunctionalities and microbial characteristics. While high contamination shows an inhibitory effect on soil multifunctionalities and microbial characteristics, which has significance for the protection and management of petroleum hydrocarbon-contaminated soil.

Role of pretreatment type and microbial mechanisms on enhancing volatile fatty acids production during anaerobic fermentation of refinery waste activated sludge

This study compared the effects of alkaline, thermal, thermal-peroxymonosulfate (PMS), and alkyl polyglucose (APG) pretreatments on volatile fatty acids (VFAs) production from refinery waste activated sludge (RWAS), including VFAs yield, composition, organics components, microbial communities, and the potential improvement of mechanisms. All pretreatments effectively enhanced the bioconversion of RWAS and consequently promoted the hydrolysis process, which inhibited the methanogenesis process. However, the release of lignin/carboxyl-rich alicyclic molecules (CRAM)-like compounds and tannin substances in thermal-PMS and APG groups significantly influenced the acidogenesis and acetogenesis processes. Among all pretreatments, alkaline pretreatment showed the highest VFAs yield of 95.06 mg/g volatile solids (VS) and VS removal of 17%. This result could be associated with the enrichment of functional hydrolytic-acidification bacteria, such as Planococcus and Soehngenia, and increased metabolism of amino acids, carbohydrates, and nucleotides. By considering an economical and efficient perspective, this study recommended the alkaline pretreatment for the anaerobic fermentation of RWAS.

Microalgal Feedstock for Biofuel Production: Recent Advances, Challenges, and Future Perspective

Globally, nations are trying to address environmental issues such as global warming and climate change, along with the burden of declining fossil fuel reserves. Furthermore, countries aim to reach zero carbon emissions within the existing and rising global energy crisis. Therefore, bio-based alternative sustainable feedstocks are being explored for producing bioenergy. One such renewable energy resource is microalgae; these are photosynthetic microorganisms that grow on non-arable land, in extreme climatic conditions, and have the ability to thrive even in sea and wastewater. Microalgae have high photosynthetic efficiencies and biomass productivity compared to other terrestrial plants. Whole microalgae biomass or their extracted metabolites can be converted to various biofuels such as bioethanol, biodiesel, biocrude oil, pyrolytic bio-oil, biomethane, biohydrogen, and bio jet fuel. However, several challenges still exist before faster and broader commercial application of microalgae as a sustainable bioenergy feedstock for biofuel production. Selection of appropriate microalgal strains, development of biomass pre-concentrating techniques, and utilization of wet microalgal biomass for biofuel production, coupled with an integrated biorefinery approach for producing value-added products, could improve the environmental sustainability and economic viability of microalgal biofuel. This article will review the current status of research on microalgal biofuels and their future perspective.

Estimation of sulfur fate and contribution to VSC emissions from lakes during algae decay

Algae decay is an important process influencing environmental variables and emissions of volatile sulfur compounds (VSCs) in eutrophic lakes. However, effects of algae decay on VSC emissions from eutrophic lakes as well as fate of algae-derived sulfur remain poorly understood. In this study, simulated algae-sediment systems were used to explore the flow and distribution of sulfur during algae decay. VSCs including hydrogen sulfide (H₂S), methanethiol (CH₃SH), carbon disulfide (CS₂) and dimethyl sulfide ((CH₃)₂S) were detected during algae decay, which increased with algae biomass and eutrophic levels in lakes. During algae decay, the highest H₂S, CH₃SH and (CH₃)₂S emission rates of 10.45, 21.82 and 43.26 μg d^-1 occurred in the first 1-2 days, respectively, while the highest CS₂ emission rates were observed between days 8 and 11. The maximum emissions of H₂S and CS₂ from algae decay were estimated at 0.51 and 0.35 mg m^-2 d^-1 in Lake Taihu, accounting for 1.57% and 0.69% of the total H₂S and CS₂ emissions of in situ, respectively. Algae decay could significantly increase the contents of total sulfur and total carbon in sediments by 2.90%-21.11% and 4.23%-45.05%, respectively. The VSC emissions during algae decay could be predicted using the multiple regression models with the contents of total carbon, total nitrogen and sulfur-containing compounds in sediments. Partial least squares path modelling demonstrated that algae decay had a low direct effect on VSC emissions with a strength of 0.06, while it had a significant influence on environmental variables with a strength of 0.63, which could affect VSC emissions with a strength of 0.85, indicating VSC emissions from eutrophic lakes were affected by the environmental variables rather than the direct influence of algae decay. These findings illustrated the mechanisms of VSC emissions during algae decay and provided insights into VSC control and mitigation for eutrophic lakes.

Identification of factors affecting removal of antibiotic resistance genes in full-scale anaerobic digesters treating organic solid wastes

Efficiencies of removing antibiotic resistance genes (ARGs) and intI1 were explored using eight full-scale anaerobic digesters. The digesters demonstrated different characteristics on the basis of substrate types (food waste, manure or sludge); configuration (single or two-stage); temperature (psychrophilic, mesophilic or thermophilic); hydraulic retention time (HRT) (9.7-44 days); and operation mode (continuous stirred tank reactor or plug flow reactor). Digesters' configuration or operating parameters showed a greater effect on abundance of ARGs than the type of input substrate. Redundancy analysis (RDA) accounted for 85.2% of the total variances and digesters with the same configuration and operational conditions showed similar performance for removal of ARGs. The highest efficiencies of removing ARGs (99.99%) were observed in two-stage thermophilic digesters with relatively long HRTs (32 days). The lowest removal efficiency (97.93%) was observed in single-stage mesophilic with relatively short HRTs (9.7 days), likely due to vertical and horizontal gene transfer.

Effect of type of coagulants on removal efficiency and removal mechanisms of antibiotic resistance genes in anaerobic digestion of primary sludge produced via a chemically enhanced primary treatment process

The potential impact of the trivalent coagulant cations on the removal mechanisms, removal efficiencies and removal patterns of antibiotic resistance genes (ARGs) during anaerobic digestion (AD) of chemically enhanced primary treatment sludge (CEPTS) was investigated using polyaluminium chloride (PACl), ferric chloride (FeCl₃) and mixed FeCl₃-PACl. The removal efficiency of 23 ARGs and intI1 improved to 72.1% in AD of primary sludge with 100 mg/L FeCl₃ and was lowest (only 54.4 %) in AD of primary sludge with 25 mg/L PACl. The removal of ARGs in AD of CEPTS with addition of single or mixed types of Al-based coagulant began to increase rapidly at the onset of batch operation. On the other hand, both the rapid increase in the removal efficiency of ARGs in AD with FeCl₃ and the maximum removal efficiency were attained later than in the other ADs.

Algae biorefinery: a promising approach to promote microalgae industry and waste utilization

Microalgae have a number of intriguing characteristics that make them a viable raw material aimed at usage in a variety of applications when refined using a bio-refining process. They offer unique capabilities that allow them to be used in biotechnology-related applications. As a result, this review explores how to increase the extent to which microalgae may be integrated with various additional biorefinery uses in order to improve their maintainability. In this study, the use of microalgae as potential animal feed, manure, medicinal, cosmeceutical, ecological, and other biotechnological uses is examined in its entirety. It also includes information on the boundaries, openings, and improvements of microalgae and the possibilities of increasing the range of microalgae through techno-economic analysis. According to the findings of this review, financing supported research and shifting the focus of microalgal investigations from biofuels production to biorefinery co-products can help guarantee that they remain a viable resource. Furthermore, innovation collaboration is unavoidable if one wishes to avoid the high cost of microalgae biomass handling. This review is expected to be useful in identifying the possible role of microalgae in biorefinery applications in the future.

Strategies and advances in the pretreatment of microalgal biomass

Modification of structural components, especially the cell wall, through adequate pretreatment strategies is critical to the bioconversion efficiency of algal biomass to biorefinery products. Over the years, several physical, physicochemical, chemical and green pretreatment methods have been developed to achieve maximum productivity of desirable by-products to sustain a circular bioeconomy. The effectiveness of the pretreatment methods is however, species specific due to diversity in the innate nature of the microalgal cell wall. This review provides a comprehensive overview of the most notable and promising pretreatment strategies for several microalgae species. Methods including the application of stress, ultrasound, electromagnetic fields, pressure, heat as well as chemical solvents (ionic liquids, supercritical fluids, deep eutectic solvents etc.) have been detailed and analyzed. Enzyme and hydrolytic microorganism based green pretreatment methods have also been reviewed. Metabolic engineering of microorganisms for product specificity and lower inhibitors can be a future breakthrough in microalgal pretreatment.

Progress in microbial biomass conversion into green energy

The increase in global population size over the past 100 decades has doubled the requirements for energy resources. To mitigate the limited fossil fuel available, new clean energy sources being environmental sustainable for replacement of traditional energy sources are explored to supplement the current scarcity. Biomass containing lignin and cellulose is the main raw material to replace fossil energy given its abundance and lower emission of greenhouse gases and NOx when transformed into energy. Bacteria, fungi and algae decompose lignocellulose leading to generation of hydrogen, methane, bioethanol and biodiesel being the clean energy used for heating, power generation and the automobile industry. Microbial Fuel Cell (MFC) uses microorganisms to decompose biomass in wastewater to generate electricity and remove heavy metals in wastewater. Biomass contains cellulose, hemicellulose, lignin and other biomacromolecules which need hydrolyzation for conversion into small molecules by corresponding enzymes in order to be utilized by microorganisms. This paper discusses microbial decomposition of biomass into clean energy and the five major ways of clean energy production, and its economic benefits for future renewable energy security.

Microbial community and metabolic responses to electrical field intensity for alleviation of ammonia inhibition in an integrated bioelectrochemical system (BES)

Bioelectrochemical system (BES) is a promising solution for mitigation of ammonia inhibition in anaerobic digestion (AD) process. However, the effect of electric field intensity on microbial community changes and metabolic function prediction during the alleviation of ammonia inhibition are still missing. The results of the current study represented that the improvement of ammonia removal (20.6%) and methane production (14.6%) could both be achieved at 0.2 V while higher voltages led to reductions of methane production (more than 48.9%) compared with the control. Moreover, hydrogenotrophic methanogens (Methanobacterium) seemed to be more robust to high voltages compared with aceticlastic methanogens (Methanosaeta). Additionally, bacteria for hydrolysis and acidogenesis (Rikenellaceae and Soehngenia) were found vulnerable to external electric field intensity. Furthermore, abundances changes of metabolic pathways demonstrated that the degradation of carbohydrates, lipids and proteins during all steps (hydrolysis, acidogenesis, acetogenesis and methanogenesis) of AD process could be affected by different applied voltages.