Trametes versicolor in lignocellulose-based bioeconomy: State of the art, challenges and opportunities

Hydrothermal liquefaction aqueous phase mycoremediation to increase inorganic nitrogen availability

Hydrothermal liquefaction aqueous phase (HTL-AP) is a waste product from a thermochemical process where wet biomass is converted into biocrude oil. This nutrient-rich wastewater may be repurposed to benefit society by assisting crop growth after adequate treatment to increase inorganic nitrogen, especially NO3 -. This study aims to increase HTL-AP inorganic nitrogen, specifically NH3/NH4 + and NO3 -, through fungal remediation for further use in hydroponic systems. Trametes versicolor, a white-rot fungus known for degrading a range of organic pollutants, was used to treat a diluted (5 %) HTL-AP for 9 days. No fungal growth was observed, but T. versicolor activity was suspected by laccase activity throughout cultivation time. NO3 --N and NH3/NH4 +-N increased by 17 and 8 times after three days of fungal treatment, which was chosen as the appropriate time for HTL-AP fungal treatment as it resulted in the highest concentration of NO3 --N. The addition of nitrifying bacteria to the fungal treatment resulted in a twofold increase in NO3 --N concentration compared to the fungal treatment alone, indicating an enhancement in treatment efficacy. COD decreased by 51.33 % after 24 h, which may be related to the fungus' capacity to reduce the concentration of organics in the wastewater; nonetheless, COD increased in the following days, which may be related to the release of fungal byproducts. T. versicolor shows promise as a potential candidate for increasing inorganic nitrogen in HTL-AP. However, future studies should primarily address HTL-AP toxicity, reducing NH3/NH4 +-N while increasing NO3 --N, and hydroponics crop production after fungal treatment.

Using low-shear aerated and agitated bioreactor for producing two specific laccases by trametes versicolor cultures induced by 2,5-xylidine: Process development and economic analysis

Laccase isoforms from basidiomycetes exhibit a superior redox potential compared to commercially available laccases obtained from ascomycete fungi, rendering them more reactive toward mono-substituted phenols and polyphenolic compounds. However, basidiomycetes present limitations for large-scale culture in liquid media, restraining the current availability of laccases from this fungal class. To advance laccase production from basidiomycetes, a newly designed 14-L low-shear aerated and agitated bioreactor provided enzyme titers up to 23.5 IU/mL from Trametes versicolor cultures. Produced enzymes underwent ultrafiltration and LC/MS-MS characterization, revealing the predominant production of only two out of the ten laccases predicted in the T. versicolor genome. Process simulation and economic analysis using SuperPro designer® suggested that T. versicolor laccase could be produced at US$ 3.60/kIU in a 200-L/batch enterprise with attractive economic parameters and a payback period of 1.7 years. The study indicates that new bioreactors with plain design help to produce low-cost enzymes from basidiomycetes.

Effects of Orange Peel Extract on Laccase Activity and Gene Expression in Trametes versicolor

The genome of Trametes versicolor encodes multiple laccase isozymes, the expression of which is responsive to various conditions. Here, we set out to investigate the potential of orange peel extract as an inducer of laccase production in this white-rot fungus, in comparison to the previously identified inducing chemical compound, veratryl alcohol. For four geographically distinct T. versicolor strains, a positive correlation has been observed between their oxidative activity and incubation time in liquid cultures. The addition of 20% orange peel extract or 5 mM veratryl alcohol caused a rapid increase in the oxidative potential of T. versicolor M99 after 24 h, with a more pronounced effect observed for the orange peel extract. To elucidate the underlying molecular mechanisms of the induced laccase activity, a transcriptional gene expression analysis was performed for the seven individual laccase genes in T. versicolor, revealing the upregulation of several laccase genes in response to the addition of each inducer. Notably, the gene encoding TvLac5 demonstrated a substantial upregulation in response to the addition of 20% orange peel extract, likely contributing to the observed increase in its oxidative potential. In conclusion, our results demonstrate that orange peels are a promising agro-industrial side stream for implementation as inducing agents in large-scale laccase production with T. versicolor.

Microorganism-mediated biodegradation for effective management and/or removal of micro-plastics from the environment: a comprehensive review

Micro- plastics (MPs) pose significant global threats, requiring an environment-friendly mode of decomposition. Microbial-mediated biodegradation and biodeterioration of micro-plastics (MPs) have been widely known for their cost-effectiveness, and environment-friendly techniques for removing MPs. MPs resistance to various biocidal microbes has also been reported by various studies. The biocidal resistance degree of biodegradability and/or microbiological susceptibility of MPs can be determined by defacement, structural deformation, erosion, degree of plasticizer degradation, metabolization, and/or solubilization of MPs. The degradation of microplastics involves microbial organisms like bacteria, mold, yeast, algae, and associated enzymes. Analytical and microbiological techniques monitor microplastic biodegradation, but no microbial organism can eliminate microplastics. MPs can pose environmental risks to aquatic and human life. Micro-plastic biodegradation involves fragmentation, assimilation, and mineralization, influenced by abiotic and biotic factors. Environmental factors and pre-treatment agents can naturally degrade large polymers or induce bio-fragmentation, which may impact their efficiency. A clear understanding of MPs pollution and the microbial degradation process is crucial for mitigating its effects. The study aimed to identify deteriogenic microorganism species that contribute to the biodegradation of micro-plastics (MPs). This knowledge is crucial for designing novel biodeterioration and biodegradation formulations, both lab-scale and industrial, that exhibit MPs-cidal actions, potentially predicting MPs-free aquatic and atmospheric environments. The study emphasizes the urgent need for global cooperation, research advancements, and public involvement to reduce micro-plastic contamination through policy proposals and improved waste management practices.

Advanced biofuel production, policy and technological implementation of nano-additives for sustainable environmental management - A critical review

This review article critically evaluates the significance of adopting advanced biofuel production techniques that employ lignocellulosic materials, waste biomass, and cutting-edge technology, to achieve sustainable environmental stewardship. Through the analysis of conducted research and development initiatives, the study highlights the potential of these techniques in addressing the challenges of feedstock supply and environmental impact and implementation policies that have historically plagued the conventional biofuel industry. The integration of state-of-the-art technologies, such as nanotechnology, pre-treatments and enzymatic processes, has shown considerable promise in enhancing the productivity, quality, and environmental performance of biofuel production. These developments have improved conversion methods, feedstock efficiency, and reduced environmental impacts. They aid in creating a greener and sustainable future by encouraging the adoption of sustainable feedstocks, mitigating greenhouse gas emissions, and accelerating the shift to cleaner energy sources. To realize the full potential of these techniques, continued collaboration between academia, industry representatives, and policymakers remains essential.

Diversity of Agaricomycetes in southern South America and their bioactive natural products

Fungi have a unique metabolic plasticity allowing them to produce a wide range of natural products. Since the discovery of penicillin, an antibiotic of fungal origin, substantial efforts have been devoted globally to search for fungal-derived natural bioactive products. Andean region forests represent one of the few undisturbed ecosystems in the world with little human intervention. While these forests display a rich biological diversity, mycological and chemical studies in these environments have been scarce. This review aims to summarise all the efforts regarding the chemical or bioactivity analyses of Agaricomycetes (Basidiomycota) from southern South America environments. Overall, herein we report a total of 147 fungal species, 21 of them showing chemical characterisation and/or biological activity. In terms of chemical cores, furans, chlorinated phenol derivatives, polyenes, lactones, terpenes and himanimides have been reported. These natural products displayed a range of biological activities including antioxidant, antimicrobial, antifungal, neuroprotective and osteoclast-forming suppressing effects.

Development of an antimicrobial fungal egg tray containing orange oil and smoke for eggs preservation at room temperature

The prevention and controlled growth of pathogenic bacteria on eggs during storage and distribution at room temperature is important to ensure commercial eggs and egg products are safe for consumer. This study investigated the combined effects of orange oil (0.001%-0.004% v/w) and smoke for 10 min in paper egg tray packaging produce from the fungal pulp of Trametes versicolor. Eggs were kept in the developed paper egg tray at room temperature (30 ± 2°C). The mechanism of the combined antibacterial effects against Escherichia coli, Salmonella Typhimurium, and Staphylococcus aureus and egg quality were investigated. The combination of orange oil (0.004%) and smoke delayed all bacteria and suppressed changes in weight loss and the quality factor of eggs (Haugh unit, yolk index, albumen index) for at least 14 d. It was found that the volatile orange oil smoke in the egg tray could be passed through the structure of the cell wall and membrane of bacteria, giving rise to loss of cell viability by irreversibly damaging the cell membranes of all the bacteria in this test. Moreover, higher antioxidant activity was found on the eggs than on the eggshells, which is linked to greater shelf-life of treated eggs. The study demonstrates an improved paper egg tray packaging system and the possibility of combining released essential oils and smoke, which can be extended to egg products. Smoke can also be modified on the surface of paper egg trays easily, which shows potential in functionalizing implanted materials with antibacterial properties.

A high throughput screening process and quick isolation of novel lignin-degrading microbes from large number of natural biomasses

High throughput screening approaches can significantly speed up the identification of novel enzymes from natural microbial consortiums. A two-step high throughput screening process was proposed and explored to screen lignin-degrading microorganisms. By employing this modified culture enrichment method and screening based on enzyme activity, a total of 82 bacterial and 46 fungal strains were isolated from fifty decayed wood samples (100 liquid cultures) collected from the banks of the Ottawa River in Canada. Among them, ten bacterial and five fungal strains were selected and identified based on their high laccase activities by 16S rDNA and ITS gene sequencing, respectively. The study identified bacterial strains from various genera including Serratia, Enterobacter, Raoultella, and Bacillus, along with fungal counterparts including Mucor, Trametes, Conifera and Aspergillus. Moreover, Aspergillus sydowii (AORF21), Mucor sp. (AORF43), Trametes versicolor (AORF3) and Enterobacter sp. (AORB55) exhibited xylanase and β- glucanase activities in addition to laccase production. The proposed approach allowed for the quick identification of promising consortia and enhanced the chance of isolating desired strains based on desired enzyme activities. This method is not limited to lignocellulose and lignin-degrading microorganisms but can be applied to identify novel microbial strains and enzymes from different natural samples.

Microbial degradation and transformation of PPCPs in aquatic environment: A review

The Pharmaceuticals and Personal Care Products (PPCPs) presence at harmful levels has been identified in aquatic ecosystems all over the world. Currently, PPCPs are more common in aquatic regions and have been discovered to be extremely harmful to aquatic creatures. Waste-water treatment facilities are the primary cause of PPCPs pollution in aquatic systems due to their limited treatment as well as the following the release of PPCPs. The degree of PPCPs elimination is primarily determined by the method applied for the remediation. It must be addressed in an eco-friendly manner in order to significantly improve the environmental quality or, at the very least, to prevent the spread as well as effects of toxic pollutants. However, when compared to other methods, environmentally friendly strategies (biological methods) are less expensive and require less energy. Most biological methods under aerobic conditions have been shown to degrade PPCPs effectively. Furthermore, the scientific literature indicates that with the exception of a few extremely hydrophobic substances, biological degradation by microbes is the primary process for the majority of PPCPs compounds. Hence, this review discusses about the optimistic role of microbe concerned in the degradation or transformation of PPCPs into non/less toxic form in the polluted environment. Accordingly, more number of microbial strains has been implicated in the biodegradation/transformation of harmful PPCPs through a process termed as bioremediation and their limitations.

Wood-Decaying Fungi: From Timber Degradation to Sustainable Insulating Biomaterials Production

Addressing the impacts of climate change and global warming has become an urgent priority for the planet's well-being. In recent decades the great potential of fungal-based products with characteristics equal to, or even outperforming, classic petroleum-derived products has been acknowledged. These new materials present the added advantage of having a reduced carbon footprint, less environmental impact and contributing to the shift away from a fossil-based economy. This study focused on the production of insulation panels using fungal mycelium and lignocellulosic materials as substrates. The process was optimized, starting with the selection of Trametes versicolor, Pleurotus ostreatus, P. eryngii, Ganoderma carnosum and Fomitopsis pinicola isolates, followed by the evaluation of three grain spawn substrates (millet, wheat and a 1:1 mix of millet and wheat grains) for mycelium propagation, and finishing with the production of various mycelium-based composites using five wood by-products and waste materials (pine sawdust, oak shavings, tree of heaven wood chips, wheat straw and shredded beech wood). The obtained biomaterials were characterized for internal structure by X-ray micro-CT, thermal transmittance using a thermoflowmeter and moisture absorption. The results showed that using a wheat and millet 1:1 (w/w) mix is the best option for spawn production regardless of the fungal isolate. In addition, the performance of the final composites was influenced both by the fungal isolate and the substrate used, with the latter having a stronger effect on the measured properties. The study shows that the most promising sustainable insulating biomaterial was created using T. versicolor grown on wheat straw.

Modeling the microbial pretreatment of camelina straw and switchgrass by Trametes versicolor and Phanerochaete chrysosporium via solid-state fermentation process: A growth kinetic sub-model in the context of biomass-based biorefineries

Advancing microbial pretreatment of lignocellulose has the potential not only to reduce the carbon footprint and environmental impacts of the pretreatment processes from cradle-to-grave, but also increase biomass valorization, support agricultural growers, and boost the bioeconomy. Mathematical modeling of microbial pretreatment of lignocellulose provides insights into the metabolic activities of the microorganisms as responses to substrate and environment and provides baseline targets for the design, development, and optimization of solid-state-fermentation (SSF) bioreactors, including substrate concentrations, heat and mass transfer. In this study, the growth of Trametes versicolor 52J (TV52J), Trametes versicolor m4D (TVm4D), and Phanerochaete chrysosporium (PC) on camelina straw (CS) and switchgrass (SG) during an SSF process was examined. While TV52J illustrated the highest specific growth rate and maximum cell concentration, a mutant strain deficient in cellulose catabolism, TVm4D, performed best in terms of holocellulose preservation and delignification. The hybrid logistic-Monod equation along with holocellulose consumption and delignification models described well the growth kinetics. The oxygen uptake rate and carbon dioxide production rate were directly correlated to the fungal biomass concentration; however, a more sophisticated non-linear relationship might explain those correlations better than a linear model. This study provides an informative baseline for developing SSF systems to integrate fungal pretreatment into a large-scale, on-farm, wet-storage process for the utilization of agricultural residues as feedstocks for biofuel production.

Critical review of biochemical pathways to transformation of waste and biomass into bioenergy

In recent years, biofuel or biogas have become the primary source of bio-energy, providing an alternative to conventionally used energy that can meet the growing energy demand for people all over the world while reducing greenhouse gas emissions. Enzyme hydrolysis in bioethanol production is a critical step in obtaining sugars fermented during the final fermentation process. More efficient enzymes are being researched to provide a more cost-effective technique during enzymatic hydrolysis. The exploitation of microbial catabolic biochemical reactions to produce electric energy can be used for complex renewable biomasses and organic wastes in microbial fuel cells. In hydrolysis methods, a variety of diverse enzyme strategies are used to promote efficient bioethanol production from various lignocellulosic biomasses like agricultural wastes, wood feedstocks, and sea algae. This paper investigates the most recent enzyme hydrolysis pathways, microbial fermentation, microbial fuel cells, and anaerobic digestion in the manufacture of bioethanol/bioenergy from lignocellulose biomass.

Understanding the biodegradation pathways of azo dyes by immobilized white-rot fungus, Trametes hirsuta D7, using UPLC-PDA-FTICR MS supported by in silico simulations and toxicity assessment

No biodegradation methods are absolute in the treatment of all textile dyes, which leads to structure-dependent degradation. In this study, biodegradation of three azo dyes, reactive black 5 (RB5), acid blue 113 (AB113), and acid orange 7 (AO7), was investigated using an immobilized fungus, Trametes hirsuta D7. The degraded metabolites were identified using UPLC-PDA-FTICR MS and the biodegradation pathway followed was proposed. RB5 (92%) and AB113 (97%) were effectively degraded, whereas only 30% of AO7 was degraded. Molecular docking simulations were performed to determine the reason behind the poor degradation of AO7. Weak binding affinity, deficiency in H-bonding interactions, and the absence of interactions between the azo (-NN-) group and active residues of the model laccase enzyme were responsible for the low degradation efficiency of AO7. Furthermore, cytotoxicity and genotoxicity assays confirmed that the fungus-treated dye produced non-toxic metabolites. The observations of this study will be useful for understanding and further improving enzymatic dye biodegradation.

Fusel oil reaction in pressurized water: characterization and antimicrobial activity

This work aimed to investigate the reaction of fusel oil (FO) with pressurized water in a continuous flow reactor, in order to verify the effect of operating conditions (temperature and alcohol to water ratio) on the formation of reaction products, as well as to potentiate the antimicrobial activity of FO. The characterization of the FO was performed by high resolution mass spectrometry (ESI-TOF) and by a chromatograph coupled to mass spectrometry (GC-MS), and the reaction products were characterized by ESI-TOF and evaluated for antifungal potential. From the results, it was verified that the FO contained 70.58 wt% of isoamyl alcohol and was formed mainly by the organic functions alcohols, aldehydes, ketones and lipids. The reaction mechanisms that prevailed during the reactions conducted in subcritical and supercritical states were dehydration and reduction, respectively, making it possible to identify pyrazine derivatives compounds in the reaction products. The fungus Irpex lacteus showed greater resistance under the application of reaction products, and the products obtained at 300 °C and 400 °C showed an inhibition percentage of 96.07% to Schizophyllum commune and 96.50% to Trametes versicolor, respectively.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13205-022-03429-3.

Alumina as an Antifungal Agent for Pinus elliottii Wood

This work deals with the durability of a Pinus elliotti wood impregnated with alumina (Al₂O₃) particles. The samples were impregnated at three different Al₂O₃ weight fractions (c.a. 0.1%, 0.3% and 0.5%) and were then exposed to two wood-rot fungi, namely white-rot fungus (Trametes versicolor) and brown-rot fungus (Gloeophyllum trabeum). Thermal and chemical characteristics were evaluated by Fourier transform infrared spectroscopy (FT-IR) and thermogravimetric (TG) analyses. The wood which incorporated 0.3 wt% of Al₂O₃ presented a weight loss 91.5% smaller than the untreated wood after being exposed to the white-rot fungus. On the other hand, the highest effectiveness against the brown-rot fungus was reached by the wood treated with 5 wt% of Al₂O₃, which presented a mass loss 91.6% smaller than that of the untreated pine wood. The Al₂O₃-treated woods presented higher antifungal resistances than the untreated ones in a way that: the higher the Al₂O₃ content, the higher the thermal stability. In general, the impregnation of the Al₂O₃ particles seems to be a promising treatment for wood protection against both studied wood-rot fungi. Additionally, both FT-IR and TG results were valuable tools to ascertain chemical changes ascribed to fungal decay.

Improvement of the Nutraceutical Profile of Brewer's Spent Grain after Treatment with Trametes versicolor

Brewer's spent grain (BSG) is an important secondary raw material that provides a readily available natural source of nutraceuticals. It finds its largest application as animal feed and part of the human diet, while the future perspective predicts an application in the production of value-added products. In order to investigate a sustainable BSG treatment method, two BSG samples (BSG1 and BSG2) were evaluated as substrates for the production of hydrolytic (xylanase, β-glucosidase and cellulase) and lignolytic enzymes (laccase, manganese peroxidase and lignin peroxidase) by solid-state fermentation (SSF) with Trametes versicolor while improving BSG nutritional value. The biological treatment was successful for the production of all hydrolytic enzymes and laccase and manganese peroxidase, while it was unsuccessful for the production of lignin peroxidase. Because the two BSGs were chemically different, the Trametes versicolor enzymes were synthesized at different fermentation times and had different activities. Consequently, the chemical composition of the two BSG samples at the end of fermentation was also different. The biological treatment had a positive effect on the increase in protein content, ash content, polyphenolic compounds, and sugars in BSG1. In BSG2, there was a decrease in the content of reducing sugars. Cellulose, hemicellulose, and lignin were degraded in BSG1, whereas only cellulose was degraded in BSG2, and the content of hemicellulose and lignin increased. The fat content decreased in both samples. The safety-related correctness analysis showed that the biologically treated sample did not contain any harmful components and was therefore safe for use in nutritionally enriched animal feed.

Antifungal Activity of Datura stramonium L. Extractives against Xylophagous Fungi

Some plants have great resistance against herbivores, invertebrates, insects, bacteria, and fungi. This resistance is mostly present in plants containing alkaloids, which are the substances responsible for giving them defensive properties. The genus Datura contains tropane alkaloids and all plants from this genus have defensive properties. In this work, we report the toxic effect against fungi of Datura stramonium extracts, obtained by the Petri dish method. The extraction solvents were water, ethanol, 2-propanol, n-butanol, propanone, butanone, 3-methyl-2-pentanone, dichloromethane, xylene, and toluene. The test fungi were Trametes versicolor (L. ex. Fr) Pilát and Rhodonia placenta (Fr.) Niemelä, K.H.Larss. & Schigel. It was found that water, butanone, and toluene extracts promoted mycelial growth, xylene extracts neither inhibited nor promoted mycelial growth, while the other extracts slightly inhibited the growth of these fungi.

The Potential of Brewer’s Spent Grain in the Circular Bioeconomy: State of the Art and Future Perspectives

Brewer’s spent grain (BSG) accounts for approximately 85% of the total mass of solid by-products in the brewing industry and represents an important secondary raw material of future biorefineries. Currently, the main application of BSG is limited to the feed and food industry. There is a strong need to develop sustainable pretreatment and fractionation processes to obtain BSG hydrolysates that enable efficient biotransformation into biofuels, biomaterials, or biochemicals. This paper aims to provide a comprehensive insight into the availability of BSG, chemical properties, and current and potential applications juxtaposed with the existing and emerging markets of the pyramid of bio-based products in the context of sustainable and circular bioeconomy. An economic evaluation of BSG for the production of highly valuable products is presented in the context of sustainable and circular bioeconomy targeting the market of Central and Eastern European countries (BIOEAST region).

Pharmaceutical Pollution in Aquatic Environments: A Concise Review of Environmental Impacts and Bioremediation Systems

The presence of emerging contaminants in the environment, such as pharmaceuticals, is a growing global concern. The excessive use of medication globally, together with the recalcitrance of pharmaceuticals in traditional wastewater treatment systems, has caused these compounds to present a severe environmental problem. In recent years, the increase in their availability, access and use of drugs has caused concentrations in water bodies to rise substantially. Considered as emerging contaminants, pharmaceuticals represent a challenge in the field of environmental remediation; therefore, alternative add-on systems for traditional wastewater treatment plants are continuously being developed to mitigate their impact and reduce their effects on the environment and human health. In this review, we describe the current status and impact of pharmaceutical compounds as emerging contaminants, focusing on their presence in water bodies, and analyzing the development of bioremediation systems, especially mycoremediation, for the removal of these pharmaceutical compounds with a special focus on fungal technologies.

Mycoremediation of lignocellulosic biorefinery sludge: A reinvigorating approach for organic contaminants remediation with simultaneous production of lignocellulolytic enzyme cocktail

This research work aims to valorize lignocellulosic biorefinery sludge with genetically engineered Trichoderma atroviride for simultaneous removal of organic contaminants, fermentation inhibitors, and lignocellulolytic enzyme cocktail production. Upon analysis, three phenolic compounds (42.6 ± 3.6 μg/g), two polycyclic aromatic hydrocarbons (0.42 ± 0.06 μg/g) and five fermentation inhibitors (2.5 ± 0.3 mg/g) were detected in the sludge. Bioaugmentation of sludge with 72 h-old T. atroviride (5%) results in the production of cellulase (21 U/g), xylanase (84 U/g), laccase (20 U/g), lignin peroxidase (14 U/g) and aryl alcohol oxidase (116 U/g), along with the concomitant removal of organic contaminants (phenol, 2, 4-dinitrophenol, pentchlorophenol, phenanthrene, benzo(a)pyrene) and fermentation inhibitors (furfural, 5-hydroxymethylfurfural, levulinic acid, ferulic acid, and catechol). Subsequently, the enrichment of sludge with nutrients and rhamnolipids enhanced the enzyme production by 5-6-fold and resulted in the removal of 85-95% of organic contaminants and fermentation inhibitors, which constitutes an eco-friendly process.

Isolation and characterization of wood-decomposing basidiomycetes from the Andean Forest in Boyacá, Colombia

This study explores the biotechnological potential of lignocellulolytic fungi collected in an oak forest. Fungal collections were obtained from natural reserves located in Boyacá-Colombia, ranging from 2700 to 3000 m.a.s.l. Twenty-three strains were isolated on malt agar, molecular characterization was performed, and ligninolytic and cellulolytic enzymatic activities were screened. Several white-rot fungi of biotechnological importance were identified as follows: Trametes sp., Trametes versicolor, Trametes villosa, Pycnoporus sanguineus, Bjerkandera adjusta, Lentinula boryana, Panus conchatus, Antrodia neotropica, Brunneoporus malicola, Laetiporus gilbertsonii, Stereum sp., Ganoderma sp., and Dichomitus sp. The strains T. versicolor 0554 and 0583, T. villosa 0562, and B. adusta 0556 showed the highest response in the qualitative enzymatic assays. These strains were used to determine their ability to decolorate the dyes aniline blue and Congo red, and it was found that T. villosa 0562 reached a level of decolorization close to 90% after 48 h of submerged culture. The fungal strains obtained here could offer alternatives to develop a process to accomplish sustainable development objectives.

Improved Foods Using Enzymes from Basidiomycetes

Within the kingdom of fungi, the division Basidiomycota represents more than 30,000 species, some with huge genomes indicating great metabolic potential. The fruiting bodies of many basidiomycetes are appreciated as food (“mushrooms”). Solid-state and submerged cultivation processes have been established for many species. Specifically, xylophilic fungi secrete numerous enzymes but also form smaller metabolites along unique pathways; both groups of compounds may be of interest to the food processing industry. To stimulate further research and not aim at comprehensiveness in the broad field, this review describes some recent progress in fermentation processes and the knowledge of fungal genetics. Processes with potential for food applications based on lipases, esterases, glycosidases, peptidases and oxidoreductases are presented. The formation and degradation of colourants, the degradation of harmful food components, the formation of food ingredients and particularly of volatile and non-volatile flavours serve as examples. In summary, edible basidiomycetes are foods—and catalysts—for food applications and rich donors of genes to construct heterologous cell factories for fermentation processes. Options arise to support the worldwide trend toward greener, more eco-friendly and sustainable processes.

Extrusion-based additive manufacturing of fungal-based composite materials using the tinder fungus Fomes fomentarius

BACKGROUND

Recent efforts in fungal biotechnology aim to develop new concepts and technologies that convert renewable plant biomass into innovative biomaterials. Hereby, plant substrates become metabolized by filamentous fungi to transform them into new fungal-based materials. Current research is thus focused on both understanding and optimizing the biology and genetics underlying filamentous fungal growth and on the development of new technologies to produce customized fungal-based materials.

RESULTS

This manuscript reports the production of stable pastes, composed of Fomes fomentarius mycelium, alginate and water with 71 wt.% mycelium in the solid content, for additive manufacturing of fungal-based composite materials. After printing complex shapes, such as hollow stars with up to 39 mm in height, a combination of freeze-drying and calcium-crosslinking processes allowed the printed shapes to remain stable even in the presence of water. The printed objects show low bulk densities of 0.12 ± 0.01 g/cm3 with interconnected macropores.

CONCLUSIONS

This work reports for the first time the application of mycelium obtained from the tinder fungus F. fomentarius for an extrusion-based additive manufacturing approach to fabricate customized light-weight 3D objects. The process holds great promise for developing light-weight, stable, and porous fungal-based materials that could replace expanded polystyrene produced from fossil resources.

A Comprehensive Review on Valorization of Agro-Food Industrial Residues by Solid-State Fermentation

Agro-food industrial residues (AFIRs) are generated in large quantities all over the world. The vast majority of these wastes are lignocellulosic wastes that are a source of value-added products. Technologies such as solid-state fermentation (SSF) for bioconversion of lignocellulosic waste, based on the production of a wide range of bioproducts, offer both economic and environmental benefits. The versatility of application and interest in applying the principles of the circular bioeconomy make SSF one of the valorization strategies for AFIRs that can have a significant impact on the environment of the wider community. Important criteria for SSF are the selection of the appropriate and compatible substrate and microorganism, as well as the selection of the optimal process parameters for the growth of the microorganism and the production of the desired metabolites. This review provides an overview of the management of AFIRs by SSF: the current application, classification, and chemical composition of AFIRs; the catalytic function and potential application of enzymes produced by various microorganisms during SSF cultivation on AFIRs; the production of phenolic compounds by SSF; and a brief insight into the role of SSF treatment of AFIRs for feed improvement and biofuel production.