Performance and microbial community analysis of a bio-contact oxidation reactor during the treatment of low-COD and high-salinity oilfield produced water

Gravity-driven membrane integrated with membrane distillation for efficient shale gas produced water treatment

Substantial volumes of hazardous shale gas produced water (SGPW) generated in unconventional natural gas exploration. Membrane distillation (MD) is a promising approach for SGPW desalination, while membrane fouling, wetting, and permeate deterioration restrict MD application. The integration of gravity-driven membrane (GDM) with MD process was proposed to improve MD performance, and different pretreatment methods (i.e., oxidation, coagulation, and granular filtration) were systematically investigated. Results showed that pretreatment released GDM fouling and improved permeate quality by enrich certain microbes' community (e.g., Proteobacteria and Nitrosomonadaceae), greatly ensured the efficient desalination of MD. Pretreatment greatly influences GDM fouling layer morphology, leading to different flux performance. Thick/rough/hydrophilic fouling layer formed after coagulation, and thin/loose fouling layer formed after silica sand filtration improved GDM flux by 2.92 and 1.9 times, respectively. Moreover, the beneficial utilization of adsorption-biodegradation effects significantly enhanced GDM permeate quality. 100 % of ammonia and 53.99 % of UV254 were efficiently removed after zeolite filtration-GDM and granular activated carbon filtration-GDM, respectively. Compared to the surged conductivity (41.29 μS/cm) and severe flux decline (>82 %) under water recovery rate of 75 % observed in single MD for SGPW treatment, GDM economically controlled permeate conductivity (1.39-19.9 μS/cm) and MD fouling (flux decline=8.3 %-27.5 %). Exploring the mechanisms, the GDM-MD process has similarity with Janus MD membrane in SGPW treatment, significantly reduced MD fouling and wetting.

The operating performance of Modified Basalt Fibers (MBF) bio-nest reactor exposed to nano-plastics

Biological nests made of Modified Basalt Fiber (MBF bio-nests) serve as effective carriers for enhancing wastewater treatment. However, little is known about their performance when exposed to nano-plastics. This study investigates the decontamination efficiency and microbial functionality of four types of MBF and traditional Basalt Fibers (BF) as carriers in contact oxidation reactors. Compared to BF, MBF demonstrated superior growth effects and biocompatibility within the bio-nest. Ca-MBF and Mn-MBF bio-nests exhibited the highest and most uniform absorption capacities, respectively, alongside increased secretion of total Extracellular Polymeric Substances (EPS) and higher Protein to Sugar (PN/PS) ratios. In sewage environments, all MBF groups displayed stable performance in removing NH4+-N and COD. Significant removal of TN and TP was notably observed in Mn-MBF treatments. Mn and Ca treatments predominantly influenced the Proteobacteria and Bacteroidetes phyla, crucial for nitrogen and phosphorus removal. Following exposure to nano-plastics, Mn-MBF and Ca-MBF treatments maintained high decontamination efficiency, particularly for TP and COD (48.64 % to 57.78 % and 90.91 % to 92.89 %, respectively). The significant removal of NH4+-N and TP only occurred in Mn-MBF and Ca-MBF treatments, which stimulated the growth of bacteria resistant to nano-plastics. Key genera such as Zoogloea and Meganema were identified as dominant, contributing to organic matter decomposition, EPS secretion, biofilm condensation, and enhanced microbial attachment. The findings underscore the structural stability enhancement of Mn-MBF and Ca-MBF bio-nests in contact oxidation reactors, demonstrating their resilience against nano-plastic pollution.

Effective and mechanistic insights into shale gas wastewater reverse osmosis concentrate treatment using ozonation-biological activated carbon process

Reverse osmosis (RO) plays a pivotal role in shale gas wastewater resource utilization. However, managing the reverse osmosis concentrate (ROC) characterized by high salinity and increased concentrations of organic matter is challenging. In this study, we aimed to elucidate the enhancement effects and mechanisms of pre-ozonation on organic matter removal efficacy in ROC using a biological activated carbon (BAC) system. Our findings revealed that during the stable operation phase, the ozonation (O3 and O3/granular activated carbon)-BAC system removes 43.6-72.2 % of dissolved organic carbon, achieving a 4-7 fold increase in efficiency compared with that in the BAC system alone. Through dynamic analysis of influent and effluent water quality, biofilm performance, and microbial community structure, succession, and function prediction, we elucidated the following primary enhancement mechanisms: 1) pre-ozonation significantly enhances the biodegradability of ROC by 4.5-6 times and diminishes the organic load on the BAC system; 2) pre-ozonation facilitates the selective enrichment of microbes capable of degrading organic compounds in the BAC system, thereby enhancing the biodegradation capacity and stability of the microbial community; and 3) pre-ozonation accelerates the regeneration rate of the granular activated carbon adsorption sites. Collectively, our findings provide valuable insights into treating ROC through pre-oxidation combined with biotreatment.

Insight into performance of nitrogen removal enhanced by adding lactic acid-rich food waste fermentation liquid as carbon source in municipal wastewater treatment

Lactic acid-rich fermentation liquid (LAFL) of food waste is found to act as a promising alternative carbon source for nitrogen removal in wastewater treatment. Here, LAFL was employed to investigate its impacts on nitrogen removal during raw municipal wastewater treatment with a comparison to sodium acetate (NaAc). Results indicated that nitrogen removals were comparable when incorporated with LAFL and NaAc (92.89 % v.s. 91.23 %). Unlike the utilization of NaAc, using LAFL could avoid suppressing the relative abundance of the nitrification genes and thus pose a negative risk to nitrogen removal during prolonged operation. The introduction of LAFL increased the stability and robustness of the functional microbial community and effectively reduced excess activated sludge (AS) generation by 109 % compared to NaAc addition, consequently enhancing nitrogen removal but diminishing the treatment cost. In general, LAFL exhibits prospective engineering application potentials and economic advantages in improving nitrogen removal by AS process.

Comparison of moving bed biofilm reactor and bio-contact oxidation reactor start-up with heterotrophic nitrification-aerobic denitrification bacteria and activated sludge inoculation under high ammonia nitrogen conditions

To overcome poor ammonia tolerance and removal performance of bio-contact oxidation (BCO) reactor inoculated with activated sludge for high-ammonia nitrogen (NH4+-N) chemical wastewater treatment, this study compared inoculating heterotrophic nitrification-aerobic denitrification (HN-AD) bacteria in moving bed biofilm reactor (MBBR) with activated sludge inoculation in BCO reactor under simulated high NH4+-N conditions. Results revealed that MBBR achieved faster biofilm formation (20 days vs. 100 days for BCO) with notable advantages: 27.6 % higher total nitrogen (TN) and 29.9 % higher NH4+-N removal efficiency than BCO. Microbial analysis indicated optimal enrichment of the key nitrogen removal (NR) bacterium Alcaligenes, leading to increased expression of NR enzymes hydroxylamine reductase, ensuring the superior NR efficiency of the MBBR. Additionally, functional enzymes and genes analysis speculated that the NR pathway in MBBR was: NH4+-N → NH2OH → NO3--N → NO2--N → NO → N2O → N2. This research offers a practical and theoretical foundation for extending HN-AD bacteria-inoculated MBBR processes.

Effects of microplastics on cold seep sediment prokaryotic communities

Cold seep sediments are an important reservoir of microplastics (MPs) whose impact on the structure and function of prokaryotic community is not well understood. In this study, the impact of 0.2% and 1% (w/w) polyethylene (PE), polystyrene (PS), and polypropylene (PP) MPs on the cold seep sediment prokaryotic community was investigated in a 120-day laboratory incubation experiment. The results revealed that exposure to MPs altered sedimentary chemical properties in a type- and concentration-dependent manner. Furthermore, MPs significantly altered the structure of bacterial community, with some MPs degradation-associated bacterial phyla significantly increasing (p < 0.05). However, in the case of archaea, the changes in the structure of microbial community were less pronounced (p > 0.05). Co-occurrence network analysis revealed that the addition of MPs reduced the network complexity, while PICRUSt2 and FAPROTAX analyses suggested that 0.2% PP and 1% PS MPs had the most significant effects on the nitrogen and carbon cycles (p < 0.05). Overall, this study provides new insights into the effects of MPs on the structure and function of microbial communities in cold seep sediments.

Changes in community structure and microbiological risks in a small stream after receiving treated shale gas wastewater for two years

Discharge of treated shale gas wastewater is becoming prevalent in the Sichuan Basin in China, and the resulting potential environmental impacts have raised concern. In this study, the responses of microbial community in the receiving water to discharge of treated shale gas wastewater were assessed during a two-year study period, covering two wet seasons and one dry season. The results showed that the discharge of treated shale gas wastewater had no significant effects on alpha diversity in the two wet seasons, but had significant effects in the dry season after 15 months of discharge. Obvious changes in microbial community structure were observed in all three seasons at the downstream sites near the wastewater outfall, as compared to the control site. Multimetric indices indicated that the impacts of wastewater discharge on microbial ecosystem occurred with the extension of the discharge period. Moreover, special attention was given to the microbiological risks associated with antibiotic resistance genes (ARGs), virulence factor genes (VFGs), and pathogenic antibiotic resistant bacteria (PARBs) in the dry season in sediments of the receiving water. At downstream sites near the outfall, five subtypes of ARGs and seven VFGs showed a significant increase in relative abundance. Forty-two PARBs carrying ARGs and VFGs were detected, and three PARBs (Pseudomonas aeruginosa, Pseudomonas stutzeri and Pseudomonas fluorescens) increased obviously in relative abundance at the downstream site near the outfall. In conclusion, long-term wastewater discharge had effects on the microbial community, and limited microbiological risks existed in the receiving waters.

Performance and microbial community analysis of combined bioreactors in treating high-salinity hydraulic fracturing flowback and produced water

The anoxic/oxic systems are a widely used biological strategy for wastewater treatment. However, little is known about the performance and microbial community correlation of different combined bioreactors in the treatment of high-COD and high-salinity hydraulic fracturing flowback and produced water (HF-FPW). In this study, the performance of Up-flow anaerobic sludge bed-bio-contact oxidation reactor (UASB-BCOR) and Fixed-bed baffled reactor (FBR-BCOR) in treating HF-FPW was investigated and compared. The results suggested the FBR-BCOR could efficiently remove COD, SS, NH4+-N, and oil pollutants, and it exhibited better resistance to the negative interference of hydraulic shock load on it. Besides, the correlation analysis first disclosed the key functional genera during the degradation process, including Ignavibacterium, Ellin6067, and Zixibacteria. Moreover, network analysis revealed that the difference of microbial co-occurrence network structure is the main driving factor for the difference of bioreactor processing capacity. This work demonstrates the feasibility and potential of FBR-BCOR in treating HF-FPW.

Stress response and signalling of a low-temperature bioaugmentation system in decentralized wastewater treatment: Degradation characteristics, community structure, and bioaugmented mechanisms

Low temperatures present challenges for stable wastewater treatment operations in cold regions. Low-temperature effective microorganisms (LTEM) were added as a bioaugmentation strategy at a decentralized treatment facility to improve performance. The effects of a low-temperature bioaugmentation system (LTBS) with LTEM at low temperatures (4 °C) on organic pollutant performance, microbial community changes, and the metabolic pathways of functional genes and functional enzymes were studied. To explore the bioaugmentation mechanism of LTBS based on stress response and signalling. The results showed that the start-up time of the LTBS (S2) with LTEM was shorter (8 days) and that it removed COD and NH₄⁺-N at higher rates (87 % and 72 %, respectively) at 4 °C. LTEM effectively degraded complex macromolecular organics into small molecular organics, and decomposing sludge flocs and the changing the extracellular polymeric substances (EPS) structure removed more organics and nitrogen. LTEM and local microbial communities (nitrifying and denitrifying bacteria) improved the ability of organic matter degradation and denitrification of the LTBS and formed a core microbial community dominated by LTEM (Bacillus and Pseudomonas). Finally, based on the functional enzymes and metabolic pathways of the LTBS, a low-temperature strengthening mechanism consisting of 6 cold stress responses and signal pathways under low temperatures was formed. This study demonstrated that the LTEM-dominated LTBS could provide an engineering alternative for future decentralized wastewater treatment in cold regions.

Efficiency and microbial community characteristics of strong alkali ASP flooding produced water treated by composite biofilm system

Strong alkali alkali-surfactant-polymer (ASP) flooding produced water is a by-product of oil recovery, and it is a stable system composed of petroleum, polyacrylamide, surfactant, and inorganic salts. Efficient, green, and safe ASP produced water treatment technology is essential for oilfield exploitation and environmental protection. In this study, an anaerobic/anoxic/moving bed biofilm reactor with a microfiltration membrane was established and assessed for the real strong alkali ASP flooding produced water (pH 10.1-10.4) treatment. The results show that the average removal rates of COD, petroleum, suspended solids, polymers and surfactants in this process are 57, 99, 66, 40, and 44%, respectively. GC-MS results show that most of the organic compounds such as alkanes and olefins in the strong alkali ASP produced water are degraded. Microfiltration membrane can significantly improve the efficiency and stability of sewage treatment system. Paracoccus (AN), Synergistaceae (ANO) and Trichococcus (MBBR) are the main microorganisms involved in the degradation of pollutants. This study reveals the potential and adaptability of composite biofilm system in treating the produced water of strong alkali ASP produced water.

Wastewater treatment effectiveness is facilitated by crucial bacterial communities in the wetland ecosystem

Microorganisms play essential roles in nutrient removal and biogeochemical cycling during wastewater treatment. However, little is known about the main roles of key functional bacterial communities in wastewater treatment processes. We collected 18 water samples and 15 sediment samples from the six operational subsystems of the constructed wetland, among which the contact oxidation pond, enhanced hybrid biofilm reactor, and central stabilization pond are the main wastewater treatment units in the constructed wetland, and then investigated the bacterial communities using 16S rRNA gene targeting and sequencing to address this knowledge gap. The results indicated that the composition of the bacterial community is closely related to the efficiency of pollutant removal. The abundant carbon metabolism function increased the removal of nitrate‑nitrogen (NO₃^--N) and total nitrogen (TN) by the contact oxidation pond by 89.84 % and 38.91 %, respectively. The overlap of ecological niches and the presence of pathogenic bacteria substantially affect effluent wastewater treatment. Second, NO₃^--N (p < 0.001) was the most important factor driving the bacterial community composition in water and sediments. Furthermore, the positive structure was prevalent in the cooccurrence network of water samples (87.24 %) and sediments (76.53 %) of the wetland, and this positive structure with keystone species was critical for the adaptation of the bacterial community to environmental filtration. In summary, this study reveals the distribution patterns of bacterial communities in different wastewater treatment processes and their driving factors and provides new perspectives on the link between the bacterial community composition and wastewater treatment.