Timing of biochar dosage for anaerobic digestion treating municipal leachate: Altered conversion pathways of volatile fatty acids

Comparing the mechanisms of syntrophic volatile fatty acids oxidation and methanogenesis recovery from ammonia stress in regular and biochar-assisted anaerobic digestion: Different roads lead to the same goal

Biochar has been recognized as a promising additive to mitigate ammonia inhibition during syntrophic methanogenesis, while the key function of biochar in this process is still in debates. This study clarified the distinct mechanisms of syntrophic volatile fatty acids -oxidizing and methanogenesis recovery from ammonia inhibition in regular and biochar-assisted anaerobic digestion. Under 5 g/L ammonia stress, adding biochar shortened the methanogenic lag time by 10.9% and dramatically accelerated the maximum methane production rate from 60.3 to 94.7 mLCH4/gVSsludge/d. A photometric analysis with a nano-WO3 probe revealed that biochar enhanced the extracellular electron transfer (EET) capacity of suspended microbes (Pearson's r = -0.98), confirming that biochar facilitated methanogenesis by boosting EET between syntrophic butyrate oxidizer and methanogens. Same linear relationship between EET capacity and methanogenic rate was not observed in the control group. Microbial community integrating functional genes prediction analysis uncovered that biochar re-shaped syntrophic partners by enriching Constridium_sensu_stricto/Syntrophomonas and Methanosarcina. The functional genes encoding Co-enzyme F420 hydrogenase and formylmethanofuran dehydrogenase were upregulated by 1.4-2.3 times, consequently enhanced the CO2-reduction methanogenesis pathway. Meanwhile, the abundances of gene encoding methylene-tetrahydrofolate transformation, a series of intermediate processes involved in acetate oxidation, in the biochar-assisted group were 28.2-63.7% higher than these in control group. Comparatively, Methanosaeta played a pivotal role driving aceticlastic methanogenesis in the control group because the abundance of gene encoding acetyl-CoA decarbonylase/synthase complex increased by 1.9 times, suggesting an aceticlastic combining H2-based syntrophic methanogenesis pathway was established in control group to resist ammonia stress. A 2nd period experiment elucidated that although depending on distinct mechanisms, the volatile fatty acid oxidizers and methanogens in both groups developed sustained and stable strategies to resist ammonia stress. These findings provided new insights to understand the distinct methanogenic recovery strategy to resist toxic stress under varied environmental conditions.

Biochar symbiosis in anaerobic digestion to enhance biogas production: A comprehensive review

In recent years, anaerobic digestion (AD) has gained popularity as a practical method for generating clean energy and efficiently managing organic waste. However, the effectiveness of the reactor is compromised by the accumulation of ammonia, acids, and nutrients, leading to inhibition and instability. Because of its adaptability, biochar (BC) has sparked a substantial interest in biogas production and can be created by charring biomass and waste materials. Adding BC to the AD process could yield the following benefits: mitigating toxic inhibition, reducing the duration of the methanogenic lag phase, immobilising functional bacteria, and enhancing the rate of electron transfer between methanogenic and acetogenic microorganisms. Nonetheless, there remains to be more comprehensive knowledge regarding the multifaceted function of BC and its intricate mechanisms in the generation of biogas in AD. The research summarises scattered information from the literature on BC production from various feedstocks and factors affecting its characteristics. Additionally, a comprehensive analysis of the utilisation of BC as an additive within AD is presented here, emphasising how BC characteristics impact AD processes and how they effectively engage key challenges.

More effective application of biochar-based immobilization technology in the environment: Understanding the role of biochar

In recent years, biochar-based immobilization technology (BIT) has been widely used to treat different environmental issues because of its cost-effectiveness and high removal performance. However, the complexity of the real environment is always ignored, which hinders the transfer of the BIT from lab-scale to commercial applications. Therefore, in this review, the analysis is performed separately on the internal side of the BIT (microbial fixation and growth) and on the external side of the BIT (function) to achieve effective BIT performance. Importantly, the internal two stages of BIT have been discussed concisely. Further, the usage of BIT in different areas is summarized precisely. Notably, the key impacts were systemically analyzed during BIT applications including environmental conditions and biochar types. Finally, the suggestions and perspectives are elucidated to solve current issues regarding BIT.

Machine learning and circular bioeconomy: Building new resource efficiency from diverse waste streams

Biorefinery systems are playing pivotal roles in the technological support of resource efficiency for circular bioeconomy. Meanwhile, artificial intelligence presents great potential in handling scientific tasks of high-dimensional complexity. This review article scrutinizes the status of machine learning (ML) applications in four critical biorefinery systems (i.e. composting, fermentation, anaerobic digestion, and thermochemical conversions) as well as their advancements against traditional modeling techniques of mechanistic approach. The contents cover their algorithm selections, modeling challenges, and prospective improvements. Perspectives are sketched to further inform collective efforts on crucial aspects. The multidisciplinary interchange of modeling knowledge will enable a more progressive digital transformation of sustainability efforts in supporting sustainable development goals.

Methanosarcina thermophila bioaugmentation and its synergy with biochar growth support particles versus polypropylene microplastics in thermophilic food waste anaerobic digestion

Both biochar supplementation as well as bioaugmentation have been shown in literature to improve the methane yield of anaerobic digestion. In this study, the combination of both are evaluated by growing Methanosarcina thermophila on biochar support particles prior to augmentation of thermophilic food waste anaerobic digestion. Biochar stand alone, bioaugmentation solely, a combination of both added separately or grown together, and utilizing polypropylene (PP) microplastics as growth support instead were all tested when starting up a thermophilic process from mesophilic inoculum. Methanosarcina thermophila and biochar supplementation displayed synergy, with 5% M. thermophila on 1 g/L biochar presenting a 32% increase in specific methane yield over the control. Double the bioaugmentation dosage/concentration was also trialled with a thermophilic inoculum, and 10% M. thermophila grown on 2 g/L biochar displayed the best results with a 20% increase specific methane yield from its control standard.

Enhancement of Anaerobic Digestion with Nanomaterials: A Mini Review

In recent years, the number of articles reporting the addition of nanomaterials to enhance the process of anaerobic digestion has exponentially increased. The benefits of this addition can be observed from different aspects: an increase in biogas production, enrichment of methane in biogas, elimination of foaming problems, a more stable and robust operation, absence of inhibition problems, etc. In the literature, one of the current focuses of research on this topic is the mechanism responsible for this enhancement. In this sense, several hypotheses have been formulated, with the effect on the redox potential caused by nanoparticles probably being the most accepted, although supplementation with trace materials coming from nanomaterials and the changes in microbial populations have been also highlighted. The types of nanomaterials tested for the improvement of anaerobic digestion is today very diverse, although metallic and, especially, iron-based nanoparticles, are the most frequently used. In this paper, the abovementioned aspects are systematically reviewed. Another challenge that is treated is the lack of works reported in the continuous mode of operation, which hampers the commercial use of nanoparticles in full-scale anaerobic digesters.

Methodological framework for wastewater treatment plants delivering expanded service: Economic tradeoffs and technological decisions

With emerging decarbonization to deploy more integrated waste management, there is a burgeoning need for re-managing waste-related infrastructures in urban environments. Wastewater treatment plants are key contributors to expanded environmental services, but relevant technological decisions and economic tradeoffs have to be assessed from a systems perspective. This study provides a methodological framework that consolidates the multiple technological and economic aspects of system retrofitting for such an evaluation purpose. Complex leachate from refuse transfer stations has been recently identified as the decarbonization roadblock of urban waste management, and it was chosen for investigations by this new methodological approach. The system impacts by complex leachate on the existing facilities were validated by experimental trials. To derive the financial outlooks for decision making, the evaluation matrix includes the quantitative impacts of bioenergy profiles, energy balance analysis of biogas utilization methods, needs of system retrofitting, economic factors, and their uncertainties. Due to the detected inefficiency of bioenergy recovery, bioinformatic analysis was proceeded for understanding the underlying mechanism to propose a mitigation solution. Overall, the methodological framework can provide a quantitative assessment of the centralized capability of wastewater treatment plants for systems planning in the new policy agenda of urban decarbonization, where the methodological potentials of expanded framework applications are also highlighted.

Characterization of Microbial Communities in Wastewater Treatment Plants Containing Heavy Metals Located in Chemical Industrial Zones

Water pollution caused by heavy metals (HMs) poses a serious risk to human health and the environment and can increase the risk of diabetes, cancer, and hypertension in particular. In this study, two full-scale wastewater treatment plants (WWTPs) in industrial zones in southern China were selected to analyze the microbial community structure, diversity, similarity, and differentiation in the anoxic/oxic (AO) and anoxic/oxic membrane bioreactor (AO-MBR) units under the stress of HMs. High-throughput sequencing showed that microbial diversity and abundance were higher in the AO process than in the AO-MBR process. In the two WWTPs, the common dominant phyla were Proteobacteria and Bacteroidetes, while the common dominant genera were Gemmatimonadaceae, Anaerolineaceae, Saprospiraceae, and Terrimonas. Manganese (Mn) and zinc (Zn) positively correlated with Saccharimonadales, Nakamurella, Micrococcales, and Microtrichales, whereas copper (Cu) and iron (Fe) positively correlated with Longilinea and Ferruginibacter. Additionally, the relative abundances of Chloroflexi, Patescibacteria, and Firmicutes differed significantly (p < 0.05) between the two processes. These results may provide comprehensive outlooks on the characterization of microbial communities in WWTPs, which could also help to reduce the potential environmental risks of the effluent from WWTPs located in industrial zones.

A comprehensive review on the use of conductive materials to improve anaerobic digestion: Focusing on landfill leachate treatment

Globally, around 70% of waste is disposed of in open dumps or landfill sites, with the leachate generated from these sites containing high concentrations of organic and inorganic compounds, which will adversely affect aquatic environments if discharged without proper treatment. Anaerobic digestion of landfill leachate is an environmentally-friendly method that efficiently converts organic compounds into methane-rich biogas. However, the widespread application of anaerobic digestion has been hindered by poor system stability, low methanogenic activity and a high level of volatile fatty acids (VFAs) accumulation, increasing the operational costs of treatment. Conductive materials can be added to the digester to improve the performance of anaerobic digestion in landfill leachate treatment systems and studies reporting the use of conductive materials for this purpose are hereby thoroughly reviewed. The mechanism of microbial growth and enrichment by conductive materials is discussed, as well as the subsequent effect on waste metabolism, methane production, syntrophic relationships and interspecies electron transfer. The porous structure, specific surface area and conductivity of conductive materials play vital roles in the facilitation of syntrophic relationships between fermentative bacteria and methanogenic archaea. In addition, the mediation of direct interspecies electron transfer (DIET) by conductive materials increases the methane content of biogas from 16% to 60% as compared to indirect interspecies electron transfer (IIET) in conventional anaerobic digestion systems. This review identifies research gaps in the field of material-amended anaerobic systems, suggesting future research directions including investigations into combined chemical-biological treatments for landfill leachate, microbial management using conductive materials for efficient pollutant removal and the capacity for material reuse. Moreover, findings of this review provide a reference for the efficient and large-scale treatment of landfill leachate by anaerobic digestion with conductive materials.

Microbial succession analysis reveals the significance of restoring functional microorganisms during rescue of failed anaerobic digesters by bioaugmentation of nano-biochar-amended digestate

Nano-biochar application was investigated for anaerobic digestion of orange peel waste. The application for methane production focused on the optimization of biochar feedstock, rescue of failed digesters, and microbial succession analysis. It showed that sewage sludge (SS) derived biochar had the highest performance enhancement among the different feedstocks, which could be ascribed to the improvement of electron transfer, interspecies hydrogen transfer, and supply of trace elements. Subsequently, nano SS biochar-amended digestate was evaluated for rescuing failed digesters, and the experimental results indicated its positive roles through gradual bioaugmentation operation. The dynamic analysis of microbial succession indicated the successful application was through the mechanism of restoring partially the functional microbial communities. The major reconstruction of functional microorganisms included bacteria phyla Hydrogenispora (24.5%) and Defluviitoga (18.8%) as well as methanogenic genera of Methanosarcina (41.5%) and Methanobacterium (27.3%). These findings would contribute to rescuing failed anaerobic digesters by bioaugmentation with biochar-amended digestate.

Plastic-containing food waste conversion to biomethane, syngas, and biochar via anaerobic digestion and gasification: Focusing on reactor performance, microbial community analysis, and energy balance assessment

To manage the mixture of food waste and plastic waste, a hybrid biological and thermal system was investigated for converting plastic-containing food waste (PCFW) into renewable energy, focusing on performance evaluation, microbial community analysis, and energy balance assessment. The results showed that anaerobic digestion (AD) of food waste, polyethylene (PE)-containing food waste, polystyrene (PS)-containing food waste, and polypropylene (PP)-containing food waste generated a methane yield of 520.8, 395.6, 504.2, and 479.8 mL CH₄/gVS, respectively. CO₂ gasification of all the plastic-containing digestate produced more syngas than pure digestate gasification. Syngas from PS-digestate reached the maximum yield of 20.78 mol/kg. During the digestate-derived-biochar-amended AD of PCFW, the methane yields in the biochars-amended digesters were 6-30% higher than those of the control digesters. Bioinformatic analysis of microbial communities confirmed the significant difference between control and biochar-amended digesters in terms of bacterial and methanogenic compositions. The enhanced methane yields in biochars-amended digesters could be partially ascribed to the selective enrichment of genus Methanosarcina, leading to an improved equilibrium between hydrogenotrophic and acetoclastic methanogenesis pathways. Moreover, energy balance assessment demonstrated that the hybrid biological and thermal conversion system can be a promising technical option for the treatment of PCFW and recovery of renewable biofuels (i.e., biogas and syngas) and bioresource (i.e., biochar) on an industrial scale.

Enhanced nitrate, manganese, and phenol removal by polyvinyl alcohol/sodium alginate with biochar gel beads immobilized bioreactor: Performance, mechanism, and bacterial diversity

Water pollutants, such as nitrate, heavy metals, and organics have attracted attention due to their harms to environmental and biological health. A novel polyvinyl alcohol/sodium alginate with biochar (PVA/SA@biochar) gel beads immobilized bioreactor was established to remove nitrate, manganese, and phenol. The optimum conditions for preparing gel beads were studied by response surface methodology (RSM). Notably, the removal efficiencies of nitrate, Mn(II), and phenol were 94.64, 72.74, and 93.97% at C/N of 2.0; the concentrations of Mn(II) and phenol were 20 and 1 mg L^-1, respectively. Moreover, addition of different concentrations of phenol significantly affected the components of dissolved organic matter, bacterial activity, and bioreactor performance. The biological manganese oxide (BMO) with three-dimensional petal-type structure produced during Mn(II) oxidation showed excellent adsorption capacity. The removal of phenol relied on a combination of biological action and adsorption processes. High-throughput analysis showed that Zoogloea sp. was the predominant bacterial group.

Increasing chemical oxygen demand and nitrogen removal efficiencies of surface-flow constructed wetlands in macrophyte-dominant seasons by adding artificial macrophytes

The objective was to test the effectiveness of a new strategy, i.e., adding artificial macrophytes (AMs) to surface-flow constructed wetlands (SFCWs) planted with emergent macrophytes (EMs), to improve COD and N removal efficiencies (REs) at the pilot scale. During EM-dominant periods, the SFCWs with only EMs had REs of 78.2%, 59.8%, 50.8% and -54.2% for NH₄⁺-N, NO₃^--N, TN, and COD, respectively, while the SFCWs with both AMs and EMs increased the REs to 85.1%, 72.2%, 73.8%, and 2.0%. The addition of AMs to SFCWs had no significant effect on EM growth (biomass or root activity). Mutual benefit was found between EMs and AMs, i.e., AMs reduced the secondary pollution caused by withered EMs, while EMs improved AM-attached biofilm functions of chemoheterotrophy, nitrate_reduction, and nitrification. Therefore, AM addition is a useful strategy to improve COD and N REs during EM-dominant periods when pollutant removal is a challenge for SFCWs.

Xylose recovery and bioethanol production from sugarcane bagasse pretreated by mild two-stage ultrasonic assisted dilute acid

Pretreatment can improve biomass biodegradability. Here, a novel sugarcane bagasse (SCB) pretreatment process based on two-stage ultrasonic assisted dilute H₂SO₄ (TUDA) under mild conditions was reported. After optimization, the pretreatment was shown to significantly degrade hemicellulose (92.40%) and remove lignin (57.41%) of SCB, leading to reduction of inhibitors and an ethanol fermentation efficiency of 93.37% by SSCF under cellulase 10 FPU/g SCB and 30% pretreated SCB loading. Physical characterization revealed that two-stage ultrasonic could better disrupt SCB than traditional ultrasonic by amplifying the collapse effect and synergistically promoting lignin removal through dilute H₂SO₄. Furthermore, xylose was also effectively recovered from pretreatment supernatant by biochar derived from bagasse. This study established a simple and efficient pretreatment process for high value-added recycling of SCB from solid residue to pretreatment liquid.

Torrefaction, temperature, and heating rate dependencies of pyrolysis of coffee grounds: Its performances, bio-oils, and emissions

The torrefaction pretreatment is of great significance to the efficient conversion of biomass residues into bioenergy. In this study, the effects of the three torrefaction temperatures (200, 250, and 300 °C) on the pyrolysis performance and products of coffee grounds (CG) were quantified. The torrefaction treatment increased the initial devolatilization and maximum peak temperatures of the CG pyrolysis. Activation energy of CG250 was lower than that of CG and more conducive to the pyrolysis. Torrefaction altered the distributions of the pyrolytic products and promoted the generation of C=C. Torrefaction changed the composition ratio of the pyrolytic bio-oils although cyanoacetic acid and 2-butene still dominated the bio-oils. The joint optimization pointed to pyrolysis temperature > 600 °C and torrefaction temperature ≤ 270 °C as the optimal conditions. Our experimental results also verified that torrefaction of CG may be more suitable at 200 and 250 °C than 300 °C.