A breakthrough dynamic-osmotic membrane bioreactor/nanofiltration hybrid system for real municipal wastewater treatment and reuse

An overview of deploying different treatment processes with membrane bioreactor for enhanced treatment of wastewaters: synergistic performances and reduced fouling of membrane

The membrane bioreactor (MBR) process synergistically combines biological treatment with membrane filtration, offering a compact design and enhanced operational flexibility. However, membrane fouling remains a critical bottleneck, limiting its widespread application, particularly in treating high-strength wastewater. Recent advances have demonstrated that integrating MBR systems with auxiliary processes such as adsorption, electrochemical treatments, algal-assisted systems, and others can significantly mitigate fouling and enhance treatment efficacy. This paper critically reviews various MBR hybrid configurations, examining their mechanisms, advantages, and limitations in terms of treatment performance and fouling control, while highlighting their potential to extend conventional MBR's applicability to challenging wastewaters and addressing operational challenges like economic viability and sustainability. Elaborated tables incorporating a wide variety of research studies within the realm of synchronization have been meticulously compiled to generate a comprehensive literature review.

Identification of dissimilatory nitrate reduction to ammonium (DNRA) and denitrification in the dynamic cake layer of a full-scale anoixc dynamic membrane bioreactor for treating hotel laundry wastewater

Identification of dissimilatory nitrate reduction to ammonium (DNRA) and denitrification in the dynamic cake layer of a full-scale anoixc dynamic membrane bioreactor (AnDMBR) for treating hotel laundry wastewater was studied. A series of experiments were conducted to understand the contributions of DNRA and canonical denitrification activities in the dynamic cake layer of the AnDMBR. The dynamic cake layer developed included two phases - a steady transmembrane pressure (TMP) increase at 0.24 kPa/day followed by a sharp TMP jump at 1.26 kPa/day four to five days after the AnDMBR start-up. The nitrogen mass balance results showed that canonical denitrification was predominant during the development of the dynamic cake layer. However, DNRA activity and accumulation of bacteria equipped with a complete DNRA pathway showed a positive correlation to the development of the dynamic cake layer. Our metagenomic analysis identified an approximately 18% of the dynamic cake layer bacterial community has a complete DNRA pathway. Pannonibacter (1%), Thauera (0.8%) and Pseudomonas (3%) contained all genes encoding for funcional enzymes of both DNRA (nitrate reductase and DNRA nitrite reductase) and denitrification (nitrate reductase, nitrous oxide reductase and nitric oxide reductase). No other metagenome-assembled genomes (MAGs) possessed a complete cononical denitrification pathway, indicating food-chain-like interactions of denitrifiers in the dynamic cake layer. We found that COD loading rate could be used to control DNRA and canonical denitrification activities during the dynamic cake layer formation.

Nanomaterials in membrane bioreactors: Recent progresses, challenges, and potentials

The use of nanomaterials (NMs) in the fabrication and modification of membranes as well as the coupling of nanomaterial-based processes with membrane processes have been attracted many researchers today. The NMs due to a wide range of types, different chemistry, the possibility of various kinds of functionality, different properties like antibacterial activity, hydrophilicity, and large surface area were applied to enhance the membrane properties. In the membrane bioreactors (MBRs) as a highly successful process of membrane technology in wastewater treatment, the NMs have been applied for improving the efficiency of MBR process. This review assessed the application of NMs both as the modifiers of membrane and as the effective part of hybrid techniques with MBR system for wastewater treatment. The efficiency of NMs blended membranes in the MBR process has been reviewed in terms of antifouling and antibacterial improvement and removal performance of the pollutants. Novel kinds of NMs were recognized and discussed based on their properties and advantages. The NMs-based photocatalytic and electrochemical processes integrated with MBR were reviewed with their benefits and drawbacks. In addition, the effect of the presence of mobilized NPs in the sludge on MBR performance was surveyed. As a result of this review, it can be concluded that nanomaterials generally improve MBR performance. The high flux and antifouling properties can be obtained by adding nanomaterials with hydrophilic and antibacterial properties to the membrane, and further studies are required for photocatalytic NMs applications. In addition, this review shows that the low amounts of NMs in the membrane structure could have an effective influence on the MBR process. Besides, since many studies in the literature are carried out at the laboratory scale, it is thought that pilot and real-scale studies should be carried out to obtain more reliable data.

Modification strategies of membranes with enhanced Anti-biofouling properties for wastewater Treatment: A review

This review addresses composite membranes used for wastewater treatment, focusing heavily on the anti-biofouling properties of such membranes. Biofouling caused by the development of a thick biofilm on the membrane surface is a major issue that reduces water permeance and reduces its lifetime. Biofilm formation and adhesion are mitigated by modifying membranes with two-dimensional or zero-dimensional carbon-based nanomaterials or their modified substituents. In particular, nanomaterials based on graphene, including graphene oxide and carbon quantum dots, are mainly used as nanofillers in the membrane. Functionalization of the nanofillers with various organic ligands or compositing the nanofiller with other materials, such as silver nanoparticles, enhances the bactericidal ability of composite membranes. Moreover, such membrane modifications reduce biofilm adhesion while increasing water permeance and salt/dye rejection. This review discusses the recent literature on developing graphene oxide-based and carbon quantum dot-based composite membranes for biofouling-resistant wastewater treatment.