1
|
Vaishnavi M, Sathishkumar K, Gopinath KP. Hydrothermal liquefaction of composite household waste to biocrude: the effect of liquefaction solvents on product yield and quality. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2024; 31:39760-39773. [PMID: 38833053 DOI: 10.1007/s11356-024-33880-z] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/21/2023] [Accepted: 05/29/2024] [Indexed: 06/06/2024]
Abstract
The hydrothermal liquefaction (HTL) of composite household waste (CHW) was investigated at different temperatures in the range of 240-360 °C, residence times in the range of 30-90 min, and co-solvent ratios of 2-8 ml/g, by utilising ethanol, glycerol, and produced aqueous phase as liquefaction solvents. Maximum biocrude yield of 46.19% was obtained at 340 °C and 75 min, with aqueous phase recirculation ratio (RR) of 5 ml/g. The chemical solvents such as glycerol and ethanol yielded a biocrude percentage of 45.18% and 42.16% at a ratio of 6 ml/g and 8 ml/g, respectively, for 340 °C and 75 min. The usage of co-solvents as hydrothermal medium increased the biocrude yield by 35.30% and decreased the formation of solid residue and gaseous products by 19.82% and 18.74% respectively. Also, the solid residue and biocrude obtained from co-solvent HTL possessed higher carbon and hydrogen content, thus having a H/C ratio and HHV that is 1.01 and 1.23 times higher than that of water as hydrothermal medium. Among the co-solvents, HTL with aqueous phase recirculation resulted in higher carbon and energy recovery percentages of 9.36% and 9.78% for solid residue and 52.09% and 56.75% for biocrude respectively. Further qualitatively, co-solvent HTL in the presence of obtained aqueous phase yielded 33.43% higher fraction of hydrocarbons than the pure water HTL and 7.70-17.01% higher hydrocarbons when compared with ethanol and glycerol HTL respectively. Nitrogen containing compounds, such as phenols and furfurals, for biocrudes obtained from all HTL processes, were found to be present in the range of 8.30-14.40%.
Collapse
Affiliation(s)
- Mahadevan Vaishnavi
- Department of Chemical Engineering, Sri Sivasubramaniya Nadar College of Engineering, Kalavakkam, Tamil Nadu, 603110, India
| | - Kannaiyan Sathishkumar
- Department of Chemical Engineering, Sri Sivasubramaniya Nadar College of Engineering, Kalavakkam, Tamil Nadu, 603110, India.
| | - Kannappan Panchamoorthy Gopinath
- Department of Chemical Engineering, Mohamed Sathak Engineering College, Sathak Nagar, SH 49, Keelakarai, Tamil Nadu, 623806, India
| |
Collapse
|
2
|
De R. Comparative dynamic optimization study of batch hydrothermal liquefaction of two microalgal strains for economic bio-oil production. BIORESOURCE TECHNOLOGY 2024; 398:130523. [PMID: 38437962 DOI: 10.1016/j.biortech.2024.130523] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/16/2023] [Revised: 02/27/2024] [Accepted: 03/01/2024] [Indexed: 03/06/2024]
Abstract
This work presents dynamic optimization strategies of batch hydrothermal liquefaction of two microalgal species, Aurantiochytrium sp. KRS101 and Nannochloropsis sp. to optimize the reactor temperature profiles. Three dynamic optimization problems are solved to maximize the endpoint biocrude yield, minimize the final time, and minimize the reactor thermal energy. The biocrude maximization and time minimization problems demonstrated 11% and 6.18% increment in the optimal biocrude yields and reduction of 78.2% and 61.66% in batch times compared to the base cases for the microalgae with higher lipid and protein fractions, respectively. The energy minimization problem revealed a significant reduction in the reactor thermal energies to generate the targeted biocrude yields compared to the biocrude maximization. Therefore, the identified optimal temperature trajectories outperformed the conventional fixed temperature profiles and could improve the overall economics of the batch bio-oil production from the algal-based biorefineries by significantly enhancing the reactor performance.
Collapse
Affiliation(s)
- Riju De
- Department of Chemical Engineering, Birla Institute of Technology and Science Pilani, K. K. Birla Goa campus, Zuarinagar, Goa 403726, India.
| |
Collapse
|
3
|
Bassoli SC, Sanson AL, Naves FL, Amaral MDS. Hydrothermal co-liquefaction of microalgae, sugarcane bagasse, brewer's spent grain, and sludge from a paper recycling mill: Modeling and evaluation of biocrude and biochar yield. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2024; 356:120626. [PMID: 38518491 DOI: 10.1016/j.jenvman.2024.120626] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/06/2023] [Revised: 01/24/2024] [Accepted: 03/10/2024] [Indexed: 03/24/2024]
Abstract
Biomass can be used as an energy source to thermochemical conversion processes to biocrude production. However, the supply and dependence on only one biomass for biocrude production can be an obstacle due to its seasonality, availability, and logistics costs. In this way, biomass waste and agroindustrial residues can be mixture and used as feedstock to the hydrothermal co-liquefaction (co-HTL) process as an alternative to obtaining biocrude. In this sense, the present paper analyzed the biocrude yield influence of the co-HTL from a quaternary unprecedented blend of different biomasses, such as sugarcane bagasse, brewer's spent grain (BSG), sludge from a paper recycling mill (PRM), and microalgae (Chlorella vulgaris). In this way, a simplex lattice design was employed and co-HTL experiments were carried out in a 2000 mL high-pressure stirred autoclave reactor under 275 °C for 60 min, considering 15% of feedstock/water ratio. Significant effects in each feedstock and their blends were analyzed aiming to increase biocrude and biochar yield. It was found that the addition of microalgae is only significant when considered more than 50% into the blend with BSG and PRM sludge to increase biocrude yield.
Collapse
Affiliation(s)
- Sara Cangussú Bassoli
- Environmental and Chemical Technology Group, Department of Chemistry, Federal University of Ouro Preto, Campus Universitário Morro Do Cruzeiro, Bauxita s/n, Ouro Preto, 35400-000, Brazil
| | - Ananda Lima Sanson
- Environmental and Chemical Technology Group, Department of Chemistry, Federal University of Ouro Preto, Campus Universitário Morro Do Cruzeiro, Bauxita s/n, Ouro Preto, 35400-000, Brazil
| | - Fabiano Luiz Naves
- Department in Chemical Engineering, Federal University of Sao Joao Del Rei, Ouro Branco, Research Group on Waste Treatment and Management Processes, Brazil
| | - Mateus de Souza Amaral
- Environmental and Chemical Technology Group, Department of Chemistry, Federal University of Ouro Preto, Campus Universitário Morro Do Cruzeiro, Bauxita s/n, Ouro Preto, 35400-000, Brazil.
| |
Collapse
|
4
|
Kumar V, Verma P. Pulp-paper industry sludge waste biorefinery for sustainable energy and value-added products development: A systematic valorization towards waste management. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2024; 352:120052. [PMID: 38244409 DOI: 10.1016/j.jenvman.2024.120052] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/01/2023] [Revised: 12/31/2023] [Accepted: 01/04/2024] [Indexed: 01/22/2024]
Abstract
The pulp-paper industry is one of the main industrial sectors that produce massive amounts of residual sludge, constituting an enormous environmental burden for the industries. Traditional sludge management practices, such as landfilling and incineration, are restricted due to mounting environmental pressures, complex regulatory frameworks, land availability, high costs, and public opinion. Valorization of pulp-paper industry sludge (PPS) to produce high-value products is a promising substitute for traditional sludge management practices, promoting their reuse and recycling. Valorization of PPIS for biorefinery beneficiation includes biomethane, biohydrogen, bioethanol, biobutanol, and biodiesel production for renewable energy generation. Additionally, the various thermo-chemical technologies can be utilized to synthesize bio-oil, hydrochar, biochar, adsorbent, and activated carbon, signifying potential for value-added generation. Moreover, PPIS can be recycled as a byproduct by incorporating it into nanocomposites, cardboard, and construction materials development. This paper aims to deliver a comprehensive overview of PPIS management approaches and thermo-chemical technologies utilized for the development of platform chemicals in industry. Substitute uses of PPIS, such as making building materials, developing supercapacitors, and making cardboard, are also discussed. In addition, this article deeply discusses recent developments in biotechnologies for valorizing PPIS to yield an array of valuable products, such as biofuels, lactic acids, cellulose, nanocellulose, and so on. This review serves as a roadmap for future research endeavors in the effective handling of PPIS.
Collapse
Affiliation(s)
- Vineet Kumar
- Bioprocess and Bioenergy Laboratory, Department of Microbiology, School of Life Sciences, Central University of Rajasthan, NH-8, Bandarsindri, Kishangarh, Ajmer-305817, Rajasthan, India.
| | - Pradeep Verma
- Bioprocess and Bioenergy Laboratory, Department of Microbiology, School of Life Sciences, Central University of Rajasthan, NH-8, Bandarsindri, Kishangarh, Ajmer-305817, Rajasthan, India.
| |
Collapse
|
5
|
Bassoli SC, da Fonseca YA, Wandurraga HJL, Baeta BEL, de Souza Amaral M. Research progress, trends, and future prospects on hydrothermal liquefaction of algae for biocrude production: a bibliometric analysis. BIOMASS CONVERSION AND BIOREFINERY 2023:1-16. [PMID: 36788981 PMCID: PMC9911945 DOI: 10.1007/s13399-023-03905-7] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 09/24/2022] [Revised: 01/17/2023] [Accepted: 02/02/2023] [Indexed: 06/18/2023]
Abstract
The rising demand to settle a sustainable energy source is guiding researchers in the production of biofuels. The liquefaction process is an alternative to obtaining biocrude from different types of renewable biomass and can mitigate environmental impacts. All papers published since 2000, which are related to the hydrothermal liquefaction process that aims to obtain biocrude are analyzed in the present study using the bibliometric approach to provide the selected database. Furthermore, the use of algae biomass in the liquefaction was also a discussed topic considering its high relevance in the process. The focus of the present study was to evaluate the evolution of the current state of the art in these topics and also to indicate trends and courses that it might be taken in the future. The database used in the bibliometric analysis was taken from the Web of Science (WoS) and the papers were selected by two different search equations. With the selected data, the use of BibExcel, VOSviewer, and PowerBi software was useful to guide the discussion and to create graphics and visual networks. As shown in the results, it was noticeable the influence of China and the USA on the field, considering the high number of publications from these countries. Moreover, the main authors were indicated considering their citation numbers, publications, and local h-index factor. Based on the author's keywords, the most significant and recent topics on liquefaction were listed. Among them, technical-economic analysis, nutrient, and energy recovery, response surface methodology, and kinetic model are highlighted. This may indicate a new direction being taken by researchers besides the operational parameters' studies. Graphical Abstract
Collapse
Affiliation(s)
- Sara Cangussú Bassoli
- Environmental and Chemical Technology Group, Department of Chemistry, Federal University of Ouro Preto, Campus Universitário Morro do Cruzeiro, Bauxita s/n, Ouro Preto, 35400-000 Brazil
| | - Yasmim Arantes da Fonseca
- Environmental and Chemical Technology Group, Department of Chemistry, Federal University of Ouro Preto, Campus Universitário Morro do Cruzeiro, Bauxita s/n, Ouro Preto, 35400-000 Brazil
| | - Hector Javier Luna Wandurraga
- Environmental and Chemical Technology Group, Department of Chemistry, Federal University of Ouro Preto, Campus Universitário Morro do Cruzeiro, Bauxita s/n, Ouro Preto, 35400-000 Brazil
| | - Bruno Eduardo Lobo Baeta
- Environmental and Chemical Technology Group, Department of Chemistry, Federal University of Ouro Preto, Campus Universitário Morro do Cruzeiro, Bauxita s/n, Ouro Preto, 35400-000 Brazil
| | - Mateus de Souza Amaral
- Environmental and Chemical Technology Group, Department of Chemistry, Federal University of Ouro Preto, Campus Universitário Morro do Cruzeiro, Bauxita s/n, Ouro Preto, 35400-000 Brazil
| |
Collapse
|
6
|
Mohanakrishna G, Modestra JA. Value addition through biohydrogen production and integrated processes from hydrothermal pretreatment of lignocellulosic biomass. BIORESOURCE TECHNOLOGY 2023; 369:128386. [PMID: 36423757 DOI: 10.1016/j.biortech.2022.128386] [Citation(s) in RCA: 10] [Impact Index Per Article: 10.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/31/2022] [Revised: 11/16/2022] [Accepted: 11/20/2022] [Indexed: 06/16/2023]
Abstract
Bioenergy production is the most sought-after topics at the crunch of energy demand, climate change and waste generation. In view of this, lignocellulosic biomass (LCB) rich in complex organic content has the potential to produce bioenergy in several forms following the pretreatment. Hydrothermal pretreatment that employs high temperatures and pressures is gaining momentum for organics recovery from LCB which can attain value-addition. Diverse bioprocesses such as dark fermentation, anaerobic digestion etc. can be utilized following the pretreatment of LCB which can result in biohydrogen and biomethane production. Besides, integration approaches for LCB utilization that enhance process efficiency and additional products such as biohythane production as well as application of solid residue obtained after LCB pretreatment were discussed. Importance of hydrothermal pretreatment as one of the suitable strategies for LCB utilization is emphasized suggesting its future potential in large scale energy recovery.
Collapse
Affiliation(s)
- Gunda Mohanakrishna
- School of Advanced Sciences, KLE Technological University, Hubballi 580031, Karnataka, India.
| | - J Annie Modestra
- Biochemical Process Engineering, Division of Chemical Engineering, Department of Civil, Environmental, and Natural Resources Engineering, Luleå University of Technology, 971-87 Luleå, Sweden
| |
Collapse
|
7
|
Vuppaladadiyam AK, Vuppaladadiyam SSV, Sahoo A, Murugavelh S, Anthony E, Bhaskar T, Zheng Y, Zhao M, Duan H, Zhao Y, Antunes E, Sarmah AK, Leu SY. Bio-oil and biochar from the pyrolytic conversion of biomass: A current and future perspective on the trade-off between economic, environmental, and technical indicators. THE SCIENCE OF THE TOTAL ENVIRONMENT 2023; 857:159155. [PMID: 36206897 DOI: 10.1016/j.scitotenv.2022.159155] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/01/2022] [Revised: 09/26/2022] [Accepted: 09/28/2022] [Indexed: 06/16/2023]
Abstract
Over the years, the transformation of biomass into a plethora of renewable value-added products has been identified as a promising strategy to fulfil high energy demands, lower greenhouse gas emissions, and exploit under-utilized resources. Techno-economic analysis (TEA) and life-cycle assessment (LCA) are essential to scale up this process while lowering the conversion cost. In this study, trade-offs are made between economic, environmental, and technical indicators produced from these methodologies to better evaluate the commercialization potential of biomass pyrolysis. This research emphasizes the necessity of combining LCA and TEA variables to assess the performance of the early-stage technology and associated constraints. The important findings based on the LCA analysis imply that most of the studies reported in literature focussed on the global warming potentials (GWP) under environmental category by considering greenhouse gases (GHGs) as evaluation parameter, neglecting many other important environmental indices. In addition, the upstream and downstream processes play an important role in understanding the life cycle impacts of a biomass based biorefinery. Under upstream conditions, the use of a specific type of feedstock may influence the LCA conclusions and technical priority. Under downstream conditions, the product utilization as fuels in different energy backgrounds is crucial to the overall impact potentials of the pyrolysis systems. In view of the TEA analysis, investigations towards maximizing the yield of valuable co-products would play an important role in the commercialization of pyrolysis process. However, comprehensive research to compare the conventional, advanced, and emerging approaches of biomass pyrolysis from the economic perspective is currently not available in the literature.
Collapse
Affiliation(s)
- Arun Krishna Vuppaladadiyam
- Department of Civil and Environmental Engineering, The Hong Kong Polytechnic University, Hong Kong; College of Science & Engineering, James Cook University, Townsville, Queensland 4811, Australia
| | | | - Abhisek Sahoo
- Department of Chemical Engineering, Indian Institute of Technology Delhi, Hauz Khas, New Delhi 110016, India
| | - S Murugavelh
- CO(2) Research and Green Technologies Centre, VIT, Vellore, Tamil Nadu 632014, India
| | - Edward Anthony
- Cranfield University, Cranfield, Bedfordshire MK43 0AL, UK
| | - Thallada Bhaskar
- Thermo-Catalytic Processes Area (TPA), Material Resource Efficiency Division (MRED), CSIR-Indian Institute of Petroleum (IIP), Dehradun 248005, India
| | - Ying Zheng
- Department of Chemical and Biochemical Engineering, Western University, London, Ontario N6A 5B9, Canada
| | - Ming Zhao
- School of Environment, Tsinghua University, Beijing 100084, China; Research Center of Biogas Centralized Utilization, Beijing 100084, China
| | - Huabo Duan
- School of Environmental Science and Engineering, Huazhong University of Science and Technology (HUST), Wuhan 430074, China
| | - Yan Zhao
- School of Environment, Beijing Normal University, Beijing 100875, China
| | - Elsa Antunes
- College of Science & Engineering, James Cook University, Townsville, Queensland 4811, Australia.
| | - Ajit K Sarmah
- Department of Civil and Environmental Engineering, The Faculty of Engineering, The University of Auckland, Private Bag 92019, Auckland 1142, New Zealand.
| | - Shao-Yuan Leu
- Department of Civil and Environmental Engineering, The Hong Kong Polytechnic University, Hong Kong.
| |
Collapse
|
8
|
Hydrogenolysis of Lignin and C–O Linkages Containing Lignin-Related Compounds over a Macroporous Silicalite-1 Array-Supported Ru-Ni Phosphide Composite. Catalysts 2022. [DOI: 10.3390/catal12121625] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/14/2022] Open
Abstract
Hydrogenolysis via targeted depolymerization of C–O linkages is a techno-economic beneficial process for converting lignin into highly valuable chemicals and clean fuels. In this work, a macroporous silicalite-1 (S-1) array-supported Ru-Ni metallic phosphide composite (Ru-Ni12P5/S-15) was prepared as a catalyst and hydrogenolysis activity under relative mild conditions was investigated using a series of compounds containing ether linkages as lignin-related model compounds. The Lewis acid sites originating from the unreduced Ru species and the macroporous geometry of S-1 significantly influenced hydrogenolysis activity and product selectivity. Analysis of the mechanism demonstrated that both the aryl ether and aliphatic ether linkages were directly hydrogenated over Ru-Ni12P5/S-15. 2D-HSQC-NMR spectroscopy demonstrated that the ether linkages of lignin were efficiently cleaved by Ru-Ni12P5/S-15. Furthermore, the obtained liquid hydrogenolysis products are high value-added chemicals used for pharmaceutical production and can be facilely tuned via the reaction conditions.
Collapse
|
9
|
Saral JS, Ranganathan P. A hydrothermal co-liquefaction of spirulina platensis with rice husk, coconut shell and HDPE for biocrude production. BIORESOURCE TECHNOLOGY 2022; 363:127911. [PMID: 36089126 DOI: 10.1016/j.biortech.2022.127911] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/05/2022] [Revised: 09/02/2022] [Accepted: 09/03/2022] [Indexed: 06/15/2023]
Abstract
Hydrothermal liquefaction (HTL) is a thermochemical conversion process to produce biofuel from biomass. In this work, co-HTL of spirulina platensis (SP) with rice husk (RH), coconut shell (CS) and high-density polyethylene (HDPE) is performed, which are not reported in the literature. The maximum biocrude yield for SP and RH mixture is 20.1 wt% at blend ratio of 50:50, temperature of 300 °C, reaction time of 30 mins and solid loading of 20 wt% whereas for SP and CS mixture, the maximum biocrude yield of 12.2 wt% is obtained under same operating conditions. It is found that biocrude yield enhances with increasing blending ratio of SP to lignocellulosic biomass. For co-HTL of SP and HDPE, the maximum biocrude yield of 28.8 wt% is obtained at blend ratio of 50:50, 350 °C, 30 mins and 20 wt% solid concentrations. For this case, the biocrude yield decreases with increasing SP/HDPE ratios. Furthermore, various characterisation methods are used to analyse the quality of biocrude.
Collapse
Affiliation(s)
- Janakan S Saral
- Department of Chemical Engineering, National Institute of Technology Calicut, Kozhikode 673601, India
| | - Panneerselvam Ranganathan
- Department of Chemical Engineering, National Institute of Technology Calicut, Kozhikode 673601, India.
| |
Collapse
|
10
|
Acaru SF, Abdullah R, Lai DTC, Lim RC. Hydrothermal biomass processing for green energy transition: insights derived from principal component analysis of international patents. Heliyon 2022; 8:e10738. [PMID: 36177226 PMCID: PMC9513766 DOI: 10.1016/j.heliyon.2022.e10738] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/15/2021] [Revised: 07/15/2022] [Accepted: 09/16/2022] [Indexed: 12/04/2022] Open
Abstract
As efforts to achieve Net Zero are intensifying, there is a strong need to identify the technological positioning of green process innovations that can support the green energy transition. A veritable contender to support these efforts is the hydrothermal biomass processing technology. This process innovation comprises diverse techniques that can convert biomass substrates into valuable low-carbon fuels. Coordination across all available conversion approaches is encouraged to propel the application of those that consider the environmental and sustainability impacts. We assessed the innovation intensity for different techniques under this green process innovation through applying natural language processing and deployment of principal component analysis on patent data. We positioned our techniques within four distinctive groups (intense, dormant, emerging, and exploratory). In this way, we tracked which hydrothermal technique currently dominates international applications and which ones are gaining traction in the future. Innovation intensities for different green innovation techniques were measured. Policymakers have decisive role in advancing techniques at dominant design phase. Emerging technologies aim attaining synthetic natural gas and C5 sugars. Exploratory techniques focus on sewage sludge and connectivity to wastewater plants. Trending techniques point towards achieving a circular economy.
Collapse
Affiliation(s)
- Silviu Florin Acaru
- Centre for Advanced Material and Energy Sciences (CAMES), Universiti Brunei Darussalam, Jalan Tungku Link, BE1410 Brunei Darussalam
| | - Rosnah Abdullah
- Centre for Advanced Material and Energy Sciences (CAMES), Universiti Brunei Darussalam, Jalan Tungku Link, BE1410 Brunei Darussalam.,Faculty of Science (FOS), Universiti Brunei Darussalam, Jalan Tungku Link, BE1410 Brunei Darussalam
| | - Daphne Teck Ching Lai
- School of Digital Science, Universiti Brunei Darussalam, Jalan Tungku Link, BE1410 Brunei Darussalam.,Institute of Applied Data Analytics (IADA), Universiti Brunei Darussalam, Jalan Tungku Link, BE1410 Brunei Darussalam
| | - Ren Chong Lim
- Centre for Advanced Material and Energy Sciences (CAMES), Universiti Brunei Darussalam, Jalan Tungku Link, BE1410 Brunei Darussalam
| |
Collapse
|
11
|
Behera B, Mari Selvam S, Balasubramanian P. Hydrothermal processing of microalgal biomass: Circular bio-economy perspectives for addressing food-water-energy nexus. BIORESOURCE TECHNOLOGY 2022; 359:127443. [PMID: 35697260 DOI: 10.1016/j.biortech.2022.127443] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/30/2022] [Revised: 06/05/2022] [Accepted: 06/07/2022] [Indexed: 06/15/2023]
Abstract
Hydrothermal processing of microalgae is regarded as a promising technology to generate multitude of energy based and value-added products. The niche of hydrothermal technologies is still under infancy in terms of the technical discrepancies related to research and development. Thus, the present review critically surveyed the recent advancements linked to the influencing factors governing the algal hydrothermal processing in terms of the product yield and quality. The sustainability of hydrothermal technologies as a standalone method and in broader aspects of circular bio-based economy for energy and value-added platform chemicals are comprehensively discussed. Process optimization and strategic integration of technologies has been suggested to improve efficiency, with reduced energy usage and environmental impacts for addressing the energy-food-water supply chains. Within the wider economic transition and sustainability debate, the knowledge gaps identified and the research hotspots fostering future perspective solutions proposed herewith would facilitate its real-time implementation.
Collapse
Affiliation(s)
- Bunushree Behera
- Agricultural & Environmental Biotechnology Group, Department of Biotechnology and Medical Engineering, National Institute of Technology Rourkela, India.
| | - S Mari Selvam
- Agricultural & Environmental Biotechnology Group, Department of Biotechnology and Medical Engineering, National Institute of Technology Rourkela, India
| | - Paramasivan Balasubramanian
- Agricultural & Environmental Biotechnology Group, Department of Biotechnology and Medical Engineering, National Institute of Technology Rourkela, India
| |
Collapse
|
12
|
Kang K, Nanda S, Hu Y. Current trends in biochar application for catalytic conversion of biomass to biofuels. Catal Today 2022. [DOI: 10.1016/j.cattod.2022.06.033] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/04/2023]
|