Enhancing enzymatic digestibility of bamboo residues using a three-constituent deep eutectic solvent pretreatment

Unveiling the Structural Characteristics of Lignin and Lignin-Carbohydrate Complexes in Fibers and Parenchyma Cells of Moso Bamboo during Different Growing Years

Understanding and recognizing the structural characteristics of lignin-carbohydrate complexes (LCCs) and lignin in different growth stages and tissue types of bamboo will facilitate industrial processes and practical applications of bamboo biomass. Herein, the LCC and lignin samples were sequentially isolated from fibers and parenchyma cells of bamboo with different growth ages. The diverse yields of sequential fractions not only reflect the different biomass recalcitrance between bamboo fibers and parenchyma cells but also uncover the structural heterogeneity of these tissues at different growth stages. The molecular structures and structural inhomogeneities of the isolated lignin and LCC samples were comprehensively investigated. The results showed that the structural features of lignin and LCC linkages in parenchyma cells were abundant in β-O-4 linkages but less with carbon-carbon linkages, suggesting that lignin and cross-linked LCC in parenchyma cells are simple in nature and easily to be tamed and tractable in the current biorefinery. Parallelly, the different ball-milled samples were directly characterized by high-resolution (800 M) solution-state 2D-HSQC NMR to analyze the whole lignocellulosic material. Overall, the scheme presented in this study will provide a comprehensive understanding of lignin and LCC linkages in fibers and parenchyma cells of bamboo and enable the utilization of bamboo biomass.

Pretreatment of biomass with ethanol/deep eutectic solvent towards higher component recovery and obtaining lignin with high β-O-4 content

Deep eutectic solvent (DES) is an ideal solvent for extracting lignin in biomass pretreatment process. However, excessive breakage of the β-O-4 bonds of lignin remained a challenge for DES-pretreated biomass. In this study, a novel pretreatment system of choline chloride-citrate acid DES combined with ethanol for the pretreatment of bamboo was developed. The chemical characteristics of extracted lignin of bamboo before and after pretreatment were analyzed by gel permeation chromatography (GPC) and nuclear magnetic resonance spectroscopy (NMR). The results showed that the lignin extracted by ethanol/DES had moderate and uniform molecular weight (Mn: 3081-4314 Da, Mw: 3130-5399 Da), and was structurally intact (maintaining 40.29 % β-O-4 content), which was about five times higher than DES-extracted lignin, and contained a high number of S units (up to 80 %). Ethanol/DES system resulted in high removal of lignin up to 78.81 % and the highest enzymatic digestibility of glucose (72.68 %) and xylan (92.95 %), respectively. In addition, recovered DES provided similar glucose digestibility yields and delignification performance. The Ethanol/DES pretreatment developed herein provided a viable method for maintaining the structural integrity of lignin and preparing lignin with high β-O-4 content whilst with a relatively high components recovery.

Synergism of jet milling and deep eutectic solvent pretreatment on grapevine lignin fractionation and enhancing enzymatic hydrolysis

Herein, we investigated the synergistic effects of jet milling (JM) and deep eutectic solvent (DES) pretreatment on the fractionation of grapevine lignin and the consequent enhancement of enzymatic hydrolysis. Grapevine, a substantial byproduct of the wine industry, was subjected to JM pretreatment to produce finely powdered particles (median diameter D50 = 98.90), which were then further treated with acidic ChCl-LA and alkaline K2CO3-EG DESs. The results revealed that the combined JM + ChCl-LA pretreatment significantly increased the cellulose preservation under optimal conditions (110 °C, 4 h, and 20 % water content), achieving removal rates of 74.18 % xylan and 66.05 % lignin, respectively. The pretreatment temperature and inhibitor production were reduced, resulting in a remarkable threefold increase in glucose yield compared to untreated samples. Moreover, the structural analysis of the pretreated lignin indicated an enrichment of phenolic units, leading to enhanced antioxidant and antibacterial activities, particularly in the JM pretreated samples. These findings underscore the promising potential of the synergistic JM and DES pretreatment in facilitating the efficient utilization of grapevine lignocellulosic biomass for sustainable biorefinery technologies.

Improving saccharification efficiency of corn stover through ferric chloride-deep eutectic solvent pretreatment

An effective deep eutectic solvent (DES) and Iron(III) chloride (FeCl3) combination pretreatment system was developed to improve the removal efficiency of lignin and hemicellulose from corn stover (CS) and enhance its saccharification. N-(2-hydroxyethyl)ethylenediamine (NE) was selected as the hydrogen-bond-donor for preparing ChCl-based DES (ChCl:NE), and a mixture of ChCl:NE (60 wt%) and FeCl3 (0.5 wt%) was utilized for combination pretreatment of CS at 110 ℃ for 50 min. FeCl3/ChCl:NE effectively removed lignin (87.0 %) and xylan (55.9 %) and the enzymatic hydrolysis activity of FeCl3/ChCl:NE-treated CS was 5.5 times that of CS. The reducing sugar yield of pretreated CS was 98.6 %. FeCl3/ChCl:NE significantly disrupted the crystal structure of cellulose in CS and improved the removal of lignin and hemicellulose, enhancing the conversion of cellulose and hemicellulose into monomeric sugars. Overall, this combination of FeCl3 and DES pretreatment methods has high application potential for the biological refining of lignocellulose.

Employing deep eutectic solvent synthesized by cetyltrimethylammonium bromide and ethylene glycol to advance enzymatic hydrolysis efficiency of rape straw

An efficient deep eutectic solvent (DES) was synthesized by cetyltrimethylammonium bromide (CTAB) and ethylene glycol (EG) and employed to treat rape straw (RS) for advancing enzymatic saccharification in this work. By optimizing the pretreatment parameters, the results displayed that the novel DES was strongly selective towards removing lignin and xylan while preserving cellulose. Under optimum conditions with 1:6 of CTAB: EG in DES, 180 °C and 80 min, the enzymatic hydrolysis efficiency of RS was enhanced by 46.0% due to the 62.2% of delignification and 53.2% of xylan removal during CTAB: EG pretreatment. In terms of the recalcitrant structure of RS, DES pretreatment caused the increment of cellulosic accessibility, reduction of hydrophobicity and surface area of lignin, and migration of cellulosic crystalline structure, which was associated with its enzymatic hydrolysis efficiency. Overall, this study presented an emerging method for the effective fractionation and valorization of lignocellulosic biomass within biorefinery technology.

Recent advances in biorefineries based on lignin extraction using deep eutectic solvents: A review

Considering the urgent need for alternative biorefinery schemes based on sustainable development, this review aims to summarize the state-of-the-art in the use of deep eutectic solvent pretreatment to fractionate lignocellulose, with a focus on lignin recovery. For that, the key parameters influencing the process are discussed, as well as various strategies to enhance this pretreatment efficiency are explored. Moreover, this review describes the challenges and opportunities associated with the valorization of extraction-derived streams and highlights recent advancements in solvent recovery techniques. Furthermore, the utilization of computational models for process design and optimization is introduced, as the initial attempts at the economic and environmental assessment of this lignocellulosic bioprocess based on deep eutectic solvents. Overall, this review offers a comprehensive perspective on the recent advances in this emerging field and serves as a foundation for further research on the potential integration of deep eutectic pretreatment in sustainable multi-product biorefinery schemes.

The pretreatment of the sustainable biomass feedstock of Pennisetum giganteum for biorefinery using deep eutectic solvents

In this study, Pennisetum giganteum (PG) was investigated as lignocellulosic feedstock to be pretreated by the acidic and basic deep eutectic solvents (DESs) to generate monomeric sugars. The basic DESs showed excellent efficiency of delignification and saccharification. ChCl/MEA can remove 79.8 % lignin and reserve 89.5 % cellulose. As a result, 95.6 % glucose and 88.0 % xylose yield were obtained, significantly enhanced 9.4 and 15.5 times in contrast with those of the unpretreated PG. The 3D microstructures of raw and pretreated PG were constructed for the first time to better investigate the pretreatment effect on its structure. The increasing porosity (20.5 %) and the reducing CrI (42.2 %) contributed in enhancing enzymatic digestion. Moreover, the recyclability of DES indicated that at least 90 % DES was recovered and 59.5 % lignin still can removed with 79.8 % glucose were obtained after five recycling cycles. Meanwhile, 51.6 % lignin was recovered throughout the recycling process.

Improved production of adipic acid from a high loading of corn stover via an efficient and mild combination pretreatment

Adipic acid is one kind of important organic dibasic acid, which has crucial role in manufacturing plastics, lubricants, resins, fibers, etc. Using lignocellulose as feedstock for producing adipic acid can reduce production cost and improve bioresource utilization. After pretreated in the mixture of 7 wt% NaOH and 8 wt% ChCl-PEG10000 at 25 ^oC for 10 min, the surface of corn stover became loose and rough. The specific surface area was increased after the removal of lignin. A high loading of pretreated corn stover was enzymatically hydrolyzed by cellulase (20 FPU/g substrate) and xylanase (15 U/g substrate), and the yield of reducing sugars was as high as 75%. Biomass-hydrolysates obtained by enzymatic hydrolysis were efficiently fermented to produce adipic acid, and the yield was 0.45 g adipic acid per g reducing sugar. A sustainable approach for manufacturing adipic acid from lignocellulose via a room temperature pretreatment has great potential in future.

Bioconversion of corn fiber to bioethanol: Status and perspectives

Due to the rising demand for green energy, bioethanol has attracted increasing attention from academia and industry. Limited by the bottleneck of bioethanol yield in traditional corn starch dry milling processes, an increasing number of studies focus on fully utilizing all corn ingredients, especially kernel fiber, to further improve the bioethanol yield. This mini-review addresses the technological challenges and opportunities on the way to achieving the efficient conversion of corn fiber. Significant advances during the review period include the detailed characterization of different forms of corn kernel fiber and the development of off-line and in-situ conversion strategies. Lessons from cellulosic ethanol technologies offer new ways to utilize corn fiber in traditional processes. However, the commercialization of corn kernel fiber conversion may be hampered by enzyme cost, conversion efficiency, and overall process economics. Thus, future studies should address these technical limitations.

Microwave-assisted choline chloride/1,2-propanediol/methyl isobutyl ketone biphasic system for one-pot fractionation and valorization of Eucalyptus biomass

The developing of pretreatment method to break the biomass barrier of lignocellulosic is a challenging task for achieve high value utilization. A fast microwave-assisted choline chloride/1,2-propanediol/methyl isobutyl ketone biphasic system was constructed for pretreating Eucalyptus to the production of furfural and cellulose-rich residues and the extraction of lignin. Results showed that the combination of AlCl₃·6H₂O and HCl had the best catalytic ability for furfural production among the examined catalysts. Under the optimal conditions (140 °C, 15 min, 0.075 M AlCl₃·6H₂O, 0.05 M HCl), the furfural yield of 55.4 %, the glucose yield of 90.3 % and the delignification rate of 92.4 % could be achieved. Moreover, the extracted lignin samples with a low polydispersity (1.55-1.73) and molecular weight (1380-2040 g/mol) are promising to act as precursor for the value-add products processing. These findings demonstrated an ultrafast pretreatment process with excellent results in biomass fractionation and comprehensive utilization of biomass components.

Deep eutectic solvents for improved biomass pretreatment: Current status and future prospective towards sustainable processes

Pretreatment processes - recognized as critical steps for efficient biomass refining - have received much attention over the last two decades. In this context, deep eutectic solvents (DES) have emerged as a novel alternative to conventional solvents representing a step forward in achieving more sustainable processes with both environmental and economic benefits. This paper presents an updated review of the state-of-the-art of DES-based applications in biorefinery schemes. Besides describing the fundamentals of DES composition, synthesis, and recycling, this study presents a comprehensive review of existing techno-economic and life cycle assessment studies. Challenges, barriers, and perspectives for the scale-up of DES-based processes are also discussed.

Process intensification strategies for green solvent mediated biomass pretreatment

Demonstrated to be highly effective for lignocellulosic biomass pretreatment, deep eutectic solvent (DES) has attracted increasing attention owing to its advantages of simple synthesis, relatively low chemical cost, and better biocompatibility as compared to certain ionic liquids. Here we provide a critical review of the status of the design/selection of DES for the pretreatment of biomass feedstocks with an emphasis on the process intensification strategies: 1) integration of microwave, ultrasound, and high solid extrusion for pretreating biomass, 2) one-pot DES pretreatment, enzymatic hydrolysis, and fermentation, 3) strategies for DES recycling and product recovery; and 4) recent progress on molecular simulations toward understanding the interactions between DES and biomass compounds such as lignin and cellulose. Lastly, we provide perspectives toward cost-effective, continuous, high-solid, environmental-benign, and industrial-relevant applications and point to future research directions to address the challenges associated with DES pretreatment.

Effective fractionation of lignocellulose components and lignin valorization by combination of deep eutectic solvent with ethanol

Introduction: A combination of deep eutectic solvent with ethanol was developed for pretreatment of Broussonetia papyrifera to effectively extract lignin and promote the subsequent enzymatic hydrolysis. Methods: In order to further explore the optimal conditions for enzymatic hydrolysis, a central composite design method was applied. Results and Discussion: The correlation between each factor and glucose yield was obtained, and the optimal conditions was 160°C, 60 min, the ratio of DES to E was 1/1 (mol/mol). The results showed that compared with control, the glucose yield increased by 130.67% under the optimal pretreatment conditions. Furthermore, the specific surface area of biomass was increased by 66.95%, and the content of xylan and lignin was decreased by 86.71% and 85.83%. The correlation between xylan/lignin removal and enzymatic hydrolysis showed that the removal of lignin facilitated the glucose yield more significantly than that of xylan. To further explore the lignin valorization, the structural and antioxidant analysis of recovered lignin revealed that high temperature was favorable for lignin with good antioxidant performance. This pretreatment is a promising method for separating lignin with high antioxidant activity and improving cellulose digestibility.

Significant Enhancement of 5-Hydroxymethylfural Productivity from D-Fructose with SG(SiO2) in Betaine:Glycerol–Water for Efficient Synthesis of Biobased 5-(Hydroxymethyl)furfurylamine

5-Hydroxymethyl-2-furfurylamine (5-HMFA) as an important 5-HMF derivative has been widely utilized in the manufacture of diuretics, antihypertensive drugs, preservatives and curing agents. In this work, an efficient chemoenzymatic route was constructed for producing 5-(hydroxymethyl)furfurylamine (5-HMFA) from biobased D-fructose in deep eutectic solvent Betaine:Glycerol–water. The introduction of Betaine:Glycerol could greatly promote the dehydration of D-fructose to 5-HMF and inhibit the secondary decomposition reactions of 5-HMF, compared with a single aqueous phase. D-Fructose (200 mM) could be catalyzed to 5-HMF (183.4 mM) at 91.7% yield by SG(SiO2) (3 wt%) after 90 min in Betaine:Glycerol (20 wt%), and at 150 °C. E. coli AT exhibited excellent bio-transamination activity to aminate 5-HMF into 5-HMFA at 35 °C and pH 7.5. After 24 h, D-fructose-derived 5-HMF (165.4 mM) was converted to 5-HMFA (155.7 mM) in 94.1% yield with D-Ala (D-Ala-to-5-HMF molar ratio 15:1) in Betaine:Glycerol (20 wt%) without removal of SG(SiO2), achieving a productivity of 0.61 g 5-HMFA/(g substrate D-fructose). Chemoenzymatic valorization of D-fructose with SG(SiO2) and E. coli AT was established for sustainable production of 5-HMFA, which has potential application.

Deep eutectic solvents as promising pretreatment agents for sustainable lignocellulosic biorefineries: A review

Increasing reliance on non-renewable fuels has shifted research attention to environmentally friendly and sustainable energy sources.The inherently recalcitrant nature of lignocellulosic biomass (LCB) makes downstream processing of the bioprocess challenging. Deep eutectic solvents (DESs) are popular and inexpensive green liquids found effective for LCB valorisation. DESs have negligible vapor-pressure and are non-flammable, recyclable, cost-economic, and thermochemically stable. This review provides a detailed overview on the DESs types, properties and their role in effective delignification and enzymatic digestibility of polysaccharides for cost-effective conversion of LCB into biofuels and bioproducts. The conglomeration of DESs with assistive pretreatment techniques can augment the process of biomass deconstruction. The current challenges in upscaling the DESs-based pretreatment technology up to commercial scale is summarized, with possible solutions and future directions. These insights would fill the knowledge-gaps to towards development of lignocellulosic biorefineries and to address the global energy crisis and environment issues.

Alkaline deacetylation-aided hydrogen peroxide-acetic acid pretreatment of bamboo residue to improve enzymatic saccharification and bioethanol production

Bamboo pretreatment with alkaline deacetylation-aided hydrogen peroxide-acetic acid (HPAC-NaOH) was investigated for producing high-value-added products. Comparing with HPAC pretreated D. sinicus, the post-treatment of alkaline deacetylation resulted in higher glucose yield of 91.3% and ethanol concentrations of 17.20 g/L, increased by about 20-27%. A strong negative correlation between the content of acetyl with cellulose accessibility and enzymatic hydrolysis yield was showed. The deacetylation of HPAC-DS contributed to the increase of cellulase adsorption capacities in substrates and the variations of hydrophilicity, cellulose crystallinity, and degree of polymerization, which can generate highly reactive cellulosic materials for enzymatic saccharification to produce bioethanol. The HPAC-NaOH pretreatment can provide a promising approach to improve the bioconversion of bamboo to biofuels, and has broad space for the biorefinery of bamboo in the south of China.

Novel strategies towards efficient molecular biohydrogen production by dark fermentative mechanism: present progress and future perspective

In the scenario of alarming increase in greenhouse and toxic gas emissions from the burning of conventional fuels, it is high time that the population drifts towards alternative fuel usage to obviate pollution. Hydrogen is an environment-friendly biofuel with high energy content. Several production methods exist to produce hydrogen, but the least energy intensive processes are the fermentative biohydrogen techniques. Dark fermentative biohydrogen production (DFBHP) is a value-added, less energy-consuming process to generate biohydrogen. In this process, biohydrogen can be produced from sugars as well as complex substrates that are generally considered as organic waste. Yet, the process is constrained by many factors such as low hydrogen yield, incomplete conversion of substrates, accumulation of volatile fatty acids which lead to the drop of the system pH resulting in hindered growth and hydrogen production by the bacteria. To circumvent these drawbacks, researchers have come up with several strategies that improve the yield of DFBHP process. These strategies can be classified as preliminary methodologies concerned with the process optimization and the latter that deals with pretreatment of substrate and seed sludge, bioaugmentation, co-culture of bacteria, supplementation of additives, bioreactor design considerations, metabolic engineering, nanotechnology, immobilization of bacteria, etc. This review sums up some of the improvement techniques that profoundly enhance the biohydrogen productivity in a DFBHP process.