Addition of mature compost improves the composting of green waste

A multi-criteria approach to test and evaluate the efficiency of two composting systems under two different climates

The selection of the appropriate composting system, climate conditions, and duration of the composting process are important parameters for municipal solid waste composting. Therefore, this research aimed to design, test, and evaluate two different static composting systems under two different climate regions, Palestine and India, following a multi-criteria approach. A forced-aeration composting system was designed for use in Palestine, and a naturally aerated one was used in India. Three experiments were conducted, two of them in Palestine and one in India. The operational parameters were controlled and monitored during the composting process, while the physio-chemical and biological parameters were tested to evaluate the compost end quality. The results showed that both systems provide good efficiency toward formation of final compost (39-43 days in Palestine, and 31 days in India), and the average materials' volume reduction was almost 60%. The physio-chemical analysis showed that most of the parameters comply with the threshold limits specified by the Palestinian Standards Institution (PSI) and Indian Fertilizer Control Order (FCO) except for minor deviations. Both systems provided a high fertility index (4.3, 4.7, and 4.8), and a high clean index (4.6, 5.0, and 4.7). However, the results of the biological parameters showed that all the experiments met PSI, but none of them met FCO, suggesting that the outer edges of the composting system didn't heat enough to inactivate pathogenic microbes, therefore, developing the system by adding turning option could overcome this shortcoming. It was concluded that the forced aeration system is suitable for Palestine, while the natural aeration system is suitable for India.Implications: Municipal solid waste management is facing technical and financial challenges worldwide due to the increasing generation of solid waste following the population growth. The current improper management of this waste stream through landfilling is adding pressure on the environment as a result of methane emissions and landfill leachate. Therefore, composting of the organic fraction through selection of an appropriate composting system can solve many waste management problems and contribute to environmental sustainability. This research focuses on design, test and evaluate two composting systems in two regions with different climatic conditions, Palestine and India as both are facing waste management problems. The outcome of this research optimized the composting process which can be replicated and scaled up in other countries worldwide with similar climatic conditions.

The boom era of emerging contaminants: A review of remediating agricultural soils by biochar

Emerging contaminants (ECs) are widely sourced persistent pollutants that pose a significant threat to the environment and human health. Their footprint spans global ecosystems, making their remediation highly challenging. In recent years, a significant amount of literature has focused on the use of biochar for remediation of heavy metals and organic pollutants in soil and water environments. However, the use of biochar for the remediation of ECs in agricultural soils has not received as much attention, and as a result, there are limited reviews available on this topic. Thus, this review aims to provide an overview of the primary types, sources, and hazards of ECs in farmland, as well as the structure, functions, and preparation types of biochar. Furthermore, this paper emphasizes the importance and prospects of three remediation strategies for ECs in cropland: (i) employing activated, modified, and composite biochar for remediation, which exhibit superior pollutant removal compared to pure biochar; (ii) exploring the potential synergistic efficiency between biochar and compost, enhancing their effectiveness in soil improvement and pollution remediation; (iii) utilizing biochar as a shelter and nutrient source for microorganisms in biochar-mediated microbial remediation, positively impacting soil properties and microbial community structure. Given the increasing global prevalence of ECs, the remediation strategies provided in this paper aim to serve as a valuable reference for future remediation of ECs-contaminated agricultural lands.

Effect of initial moisture content, resulting from different ratios of vegetable waste to maize straw, on compost was mediated by composting temperatures and microbial communities at low temperatures

Owing to the huge amounts and perishable character of vegetable wastes, composting is one of the best options for recycling vegetable wastes post-harvest. The initial moisture content (MC) is critical for optimizing composting process, but the effect of high MC in undehydrated vegetable wastes on composting was rarely reported. For this, the plant-scale windrows were prepared by mixing cauliflower waste and maize straw at different ratios to control initial MC of 70 % (T1-70) and 80 % (T2-80), respectively, and composted in winter. As composting progressed, substantial organic matter degradation, progressive humification, decreases in electrical conductivity and increases of pH and germination index (GI) were observed in both treatments. Nonetheless, T1-70 accelerated heating rate early during composting, prolonged high temperature period (>50 °C) by 30 d, thus increased the harmless level of composting, and significantly improved the humification of end-products compared to T2-80. Results also revealed that T1-70 activated more indigenous microbes and enhanced microbial interactions early during composting, with the fungi enriched in T1-70 playing an important role in accelerating the composting process. Remarkably, the difference in composting temperatures, humification degree, and microbial communities between the two treatments was most significant during the maturation phase. In this phase, MWH_CFBk5, Planktosalinus, Pseudopedobacter, and Luteimonas enriched in T1-70 were positively correlated with humification indices. It is suggested that the effect of initial MC, resulting from different ratios of vegetable waste to maize straw, on their composting was mediated by the composting temperature and microbial communities at low temperatures.

From waste to protein: a new strategy of converting composted distilled grain wastes into animal feed

Distilled grain waste (DGW) is rich in nutrients and can be a potential resource as animal feed. However, DGW contains as much as 14% lignin, dramatically reducing the feeding value. White-rot fungi such as Pleurotus ostreatus could preferentially degrade lignin with high efficiency. However, lignin derivatives generated during alcohol distillation inhibit P. ostreatus growth. Thus, finding a new strategy to adjust the DGW properties to facilitate P. ostreatus growth is critical for animal feed preparation and DGW recycling. In this study, three dominant indigenous bacteria, including Sphingobacterium thermophilum X1, Pseudoxanthomonas byssovorax X3, and Bacillus velezensis 15F were chosen to generate single and compound microbial inoculums for DGW composting to prepare substrates for P. ostreatus growth. Compared with non-inoculated control or single microbial inoculation, all composite inoculations, especially the three-microbial compound, led to faster organic metabolism, shorter composting process, and improved physicochemical properties of DGW. P. ostreatus growth assays showed the fastest mycelial colonization (20.43 μg·g-1 ergosterol) and extension (9 mm/d), the highest ligninolytic enzyme activities (Lac, 152.68 U·g-1; Lip, 15.56 U·g-1; MnP, 0.34 U·g-1; Xylanase, 10.98 U·g-1; FPase, 0.71 U·g-1), and the highest lignin degradation ratio (30.77%) in the DGW sample after 12 h of composting with the three-microbial compound inoculation when compared to other groups. This sample was relatively abundant in bacteria playing critical roles in amino acid, carbohydrate, energy metabolism, and xenobiotic biodegradation, as suggested by metagenomic analysis. The feed value analysis revealed that P. ostreatus mycelia full colonization in composted DGW led to high fiber content retention and decreased lignin content (final ratio of 5% lignin) but elevated protein concentrations (about 130 g·kg-1 DM). An additional daily weight gain of 0.4 kg/d was shown in cattle feeding experiments by replacing 60% of regular feed with it. These findings demonstrate that compound inoculant consisting of three indigenous microorganisms is efficient to compost DGW and facilitate P. ostreatus growth. P. ostreatus decreased the lignin content of composted DGW during its mycelial growth, improving the quality of DGW for feeding cattle.

Pilot-scale membrane-covered composting of food waste: Initial moisture, mature compost addition, aeration time and rate

The impact of different operational parameters on the composting efficiency and compost quality during pilot-scale membrane-covered composting (MCC) of food waste (FW) was evaluated. Four factors were assessed in an orthogonal experiment at three different levels: initial mixture moisture (IMM, 55 %, 60 %, and 65 %), aeration time (AT, 6, 9, and 12 h/d), aeration rate (AR, 0.2, 0.4, and 0.6 m3/h) and mature compost addition ratio (MC, 2 %, 4 %, and 6 %). Results indicated that 55 % IMM, 6 h/d AT, 0.4 m3/h AR, and 4 % MC addition ratio simultaneously provided the compost with the maximum cumulative temperature and the minimum moisture. It was shown that the IMM was the driving factor of this optimum composting process. On contrary, the optimal parameters for reducing carbon and nitrogen loss were 65 % IMM, 6 h/d AT, 0.4 m3/h AR, and 2 % MC addition ratio. The AR had the most influence on reducing carbon and nitrogen losses compared to all other factors. The optimal conditions for compost maturity were 55 % IMM, 9 h/d AT, 0.2 m3/h AR, and 6 % MC addition ratio. The primary element influencing the pH and electrical conductivity values was the AR, while the germination index was influenced by IMM. Protein was the main organic matter limiting the composting efficiency. The results of this study will provide guidance for the promotion and application of food waste MCC technology, and contribute to a better understanding of the mechanisms involved in MCC for organic solid waste treatment.

Effect of different bulking agents on fed-batch composting and microbial community profile

The current study focused on analyzing the effect of different types of bulking agents and other factors on fed-batch composting and the structure of microbial communities. The results indicated that the introduction of bulking agents to fed-batch composting significantly improved composting efficiency as well as compost product quality. In particular, using green waste as a bulking agent, the compost products would achieve good performance in the following indicators: moisture (3.16%), weight loss rate (85.26%), and C/N ratio (13.98). The significant difference in moisture of compost products (p < 0.05) was observed in different sizes of bulking agent (green waste), which was because the voids in green waste significantly affected the capacity of the water to permeate. Meanwhile, controlling the size of green waste at 3-6 mm, the following indicators would show great performance from the compost products: moisture (3.12%), organic matter content (63.93%), and electrical conductivity (EC) (5.37 mS/cm). According to 16S rRNA sequencing, the relative abundance (RA) of thermophilic microbes increased as reactor temperature rose in fed-batch composting, among which Firmicutes, Proteobacteria, Basidiomycota, and Rasamsonia were involved in cellulose and lignocellulose degradation.

Responses of microorganisms to different wavelengths of light radiation during green waste composting

Light radiation can degrade recalcitrant materials like lignocelluloses in litter and serve as a physical condition to accelerate green waste (GW) decomposition, but few studies have considered the microbial effects of light wavelength on GW composting. This study innovatively investigated the effects of different wavelengths of light radiation, including full-spectrum, no blue light, no UV, no UV-A, no UV-B, and dark conditions, on accelerating the GW composting process. Especially, the study explored the dynamic changes in the degradation of lignocelluloses and evaluated the responses of microorganisms throughout the composting process under different light radiation wavelengths. No blue light (where radiation between 400 and 500 nm was blocked by the film) yielded the highest-quality compost within 40 days. In comparison to the dark (control), no blue light exhibited an elevated composting temperature (56.7 °C), an extended thermophilic phase (6 days), and increased degradation rates of lignin, cellulose, and hemicellulose by 13 %, 15 %, and 12 %, respectively. This study revealed that during the composting mesophilic phase, bacterial diversity performed best under no blue light, while fungal diversity excelled under full-spectrum. In the thermophilic phase, microbial diversity exhibited optimal performance under full-spectrum. During the cooling phase, bacterial diversity was highest under no blue light, and fungal diversity excelled under no UV-A. During the mesophilic and cooling phases, the bacterial ACE index for no blue light exceeded that of the other light radiation wavelengths, with values of 418 and 494, respectively. Under no blue light, the Shannon index of microorganisms remained within the range of 2.0-4.8, demonstrating superior performance. Meanwhile, the relative abundances of lignin-degrading microorganisms (Flavobacterium, Acaulium, and Acremoniu) under no blue light has increased, demonstrating improved microbial community structures. Therefore, no blue light radiation offered a novel approach to expedite GW composting.

Management of water-based paint sludge originating from the automotive industry via composting

Water-based paint sludge generated from the automotive industry is considered a hazardous waste due to its high carbon content and is challenging and costly to manage. This study investigates the management of water-based paint sludge through the composting process, considering its high carbon content. The water-based paint sludge was composted in five separate reactors with the addition of treatment sludge from the same industry as co-substrate and inoculum, as well as sunflower stalks as a bulking agent. The ratio of paint sludge added to the compost mixtures varied between 40% and 80%. The highest temperature was achieved in reactors where industrial sludge was added, and the bulking agent was used at a rate of 20% (R3 and R5). The most efficient composting process was conducted with the addition of 60% water-based paint sludge, 20% treatment sludge, and 20% sunflower stalks (w/w, wet weight basis) (R3). During this process, reductions in organic matter content were observed due to organic matter mineralization, resulting in a decrease in moisture during the maturation phase and consequently reducing waste volumes. The composting process can be a useful tool in addressing the challenges of paint sludge management. Utilizing the composting process not only reduces waste volumes, thereby minimizing environmental impacts, but also offers a sustainable approach to paint sludge management by lowering disposal costs. It is also possible to achieve more effective results by composting paint sludge with different recipes and the use of various bulking agents.Implications: Composting is a method that can be used to achieve stabilization, reduce the quantity, and enable biodrying of water-based paint sludge generated from the automotive industry. In this study, different ratios of paint sludge were mixed with treatment sludge from the same industry as co-substrate and inoculum, while sunflower stalks were added as a bulking agent, and a composting process was conducted. The addition of industrial wastewater treatment sludge and sunflower stalks has increased the efficiency of the paint sludge composting process. In the management of paint sludge, the composting process has emerged as a significant alternative that reduces disposal costs and environmental impacts.

Composting municipal solid waste and animal manure in response to the current fertilizer crisis - a recent review

The dynamic price increases of fertilizers and the generation of organic waste are currently global issues. The growth of the population has led to increased production of solid municipal waste and a higher demand for food. Food production is inherently related to agriculture and, to achieve higher yields, it is necessary to replenish the soil with essential minerals. A synergistic approach that addresses both problems is the implementation of the composting process, which aligns with the principles of a circular economy. Food waste, green waste, paper waste, cardboard waste, and animal manure are promising feedstock materials for the extraction of valuable compounds. This review discusses key factors that influence the composting process and compares them with the input materials' parameters. It also considers methods for optimizing the process, such as the use of biochar and inoculation, which result in the production of the final product in a significantly shorter time and at lower financial costs. The applications of composts produced from various materials are described along with associated risks. In addition, innovative composting technologies are presented.

Effect evaluation of different green wastes on food waste digestate composting and improvement of operational conditions

This study attempted to determine the influence of diverse green wastes on food waste digestate composting and the improvement of operational conditions. Various effects of the green wastes (GW), with different types and sizes, initial substrate mixture C/N ratios, compost pile heights, and turning frequencies on the food waste digestate (FWD) composting were examined in the current work. The findings showed that the use of street sweeping green waste (SSGW) as an additive can maintain the thermophilic stage of the FWD composting for 28 days, while the end-product contained the greatest amounts of total phosphorus (TP, 2.29%) and total potassium (TK, 4.61%) and the lowest moisture content (14.8%). Crushed SSGW (20 mm) enabled the FWD composting to maintain the longest thermophilic period (28 days), achieving the highest temperature (70.2 °C) and seed germination index (GI, 100%). Adjusting the initial substrate mixture C/N ratio to 25, compost pile height to 30 cm, and turning frequency to three times a day could enhance the efficiency and improve the fertilizer quality of the co-composting of the FWD and SSGW. This study suggested that co-composting of FWD and SSGW (FWD/SSGW = 2.3, wet weight) is a promising technique for the treatment of municipal solid waste and provided significant theoretical data for the application of composting.

Precision co-composting of multi-source organic solid wastes provide a sustainable waste management strategy with high eco-efficiency: a life cycle assessment

With the increase of organic solid wastes (OSWs), current waste management practices, such as landfill, incineration, and windrow composting, have shown weaknesses in both resource recycling and environmental protection. Co-composting has been used to achieve nutrient and carbon recycling but is accused of high ammonia emission and low degradation efficiency. Therefore, this study developed a precision co-composting strategy (S3, which adds functional bacteria generated from food processing waste to a co-composting system) and compared it with the current OSW treatment strategy (S1) and traditional co-composting strategy (S2) from a life cycle assessment (LCA) perspective. The results showed that compared with S1, the eco-efficiency increased by 31.3% due to the higher economic profit of S2 but did not directly reduce the environmental cost. The addition of bacterial agents reduced ammonia emissions and shortened composting time, so compared with S1 and S2, the environmental cost of S3 was reduced by 37.9 and 43.6%, while the economic profit increased by 79.8 and 24.4%, respectively. The changes in environmental costs and economic benefits resulted in a huge improvement of S3's eco-efficiency, which was 189.6 and 121.7% higher than S1 and S2. Meanwhile, the adoption of S3 at a national scale in China could reduce the emission of 1,4-dichlorobenzene by 99.9% compared with S1 and increase profits by 6.58 billion USD per year. This study proposes a novel approach that exhibits high eco-efficiency in the treatment of OSWs.

Effects of adding steel slag on humification and characteristics of bacterial community during phosphate-amended composting of municipal sludge

This study aimed to investigate the effects of different proportions (0%, 5%, 7.5%, and 10%) of steel slag (SS) on humification and bacterial community characteristics during phosphate-amended composting of municipal sludge. Compared with adding KH2PO4 alone, co-adding SS significantly promoted the temperature, pH, nitrification, and critical enzyme activities (polyphenol oxidase, cellulase, laccase); especially organic matter (OM) degradation rate (25.5%) and humification degree (1.8) were highest in the 5%-SS treatment. Excitation-emission matrix-parallel factor confirmed that co-adding SS could promote the conversion of protein-like substances or microbial by-products into humic-like substances. Furthermore, adding 5%-SS significantly improved the relative abundances of Actinobacteria, Firmicutes and the genes related to carbohydrate and amino acid metabolism, and enhanced the interactions of bacterial community in stability and complexity. The partial least squares path model indicated that OM was the primary factor affecting humification. These results provided a promising strategy to optimize composting of municipal sludge via SS.

Brown sugar as a carbon source can make agricultural organic waste compost enter the secondary thermophilic stage and promote compost decomposition

To enhance the efficiency of composting agricultural organic waste (AOW), this study aimed to examine the impact of inoculating tomato straw compost with two distinct microbial agents: ZymoZone (ZZ), a composite microbial agent derived from the straw compost and Effective Microorganisms (EM), a commercial microbial agent. Furthermore, in order to reactivate the microorganisms within the compost during the initial high temperature phase, 10% brown sugar was introduced as a carbon source. The objective of this addition was to assess its influence on the composting process. The findings revealed that compared to the control (CK) group, the ZZ and EM treatments extended the first high-temperature phase by 2 and 1 day, respectively. Furthermore, with the addition of 10% brown sugar, the ZZ and EM treatments remained in the second high-temperature phase for 8 and 7 days, respectively, while the CK treatment had already entered the cooling stage by then. Notably, the inoculation of microbial agents and the addition of brown sugar substantially augmented the activity of lignocellulose-related hydrolases, thereby promoting the degradation of lignocellulose in the ZZ and EM treatment groups. This was confirmed by FTIR analysis, which demonstrated that the addition of microbial agents facilitated the degradation of specific substances, leading to reduced absorbance in the corresponding spectra. XRD analysis further indicated a notable reduction in cellulose crystallinity for both the ZZ (8.00%) and EM (7.73%) treatments. Hence, the incorporation of microbial agents and brown sugar in tomato straw compost effectively enhances the composting process and improves the quality of compost products.

Assessing the suitability of municipal sewage sludge and coconut bran as breeding medium for Oryza sativa L. seedlings and developing a standardized substrate

The utilization of organic solid waste (OSW) for preparing standardized seedling substrates is a main challenge due to its temporal and spatial variability. This study aims to form models based on data from the literature and validate them through experiments to explore a standardized seedling substrate. The typical OSW in Hainan Province, including municipal sewage sludge (MSS), coconut bran (CB), seaweed mud (SM), and municipal sewage sludge biochar (MSSB), was used as raw material. A series of six mixing ratios was tested, namely: T1 (0% MSS: 90% CB), T2 (10% MSS: 80% CB), T3 (30% MSS: 60% CB), T4 (50% MSS: 40% CB), T5 (70% MSS: 20% CB), and T6 (90% MSS: 0% CB). SM and MSSB were added as amendment materials at 5% (w/w) for each treatment. The physicochemical properties of substrates, agronomic traits of rice seedlings and microbial diversity were analyzed. The results showed that the four kinds of OSW played an active role in providing rich sources of nutrients. The dry weight of the above-ground part was 2.98 times greater in T3 than that of the commercial substrate. Furthermore, the microbial analysis showed a higher abundance of Actinobacteria in T3, representing the stability of the composted products. Finally, the successful fitting of the results with the linear regression models could establish relationship equations between the physicochemical properties of the substrate and the growth characteristics of seedlings. The relevant parameters suitable for the growth of rice seedlings were as follows: pH (6.46-7.01), EC (less than 2.12 mS cm-1), DD (0.13-0.16 g cm-3), and TPS (65.68-82.73%). This study proposed relevant parameters and models for standardization of seedling substrate, which would contribute to ensuring the quality of seedlings and OSW resource utilization.

Impacts of adding FeSO4 and biochar on nitrogen loss, bacterial community and related functional genes during cattle manure composting

This study investigated the impacts of adding FeSO₄ and biochar to cattle manure and rice straw composts on functional genes controlling nitrogen loss, bacterial community, nitrification, and denitrification. Four treatments were established, including a control group (CP), and CP mixtures that included 4% biochar (TG1), 4% FeSO₄ (TG2), or 2% FeSO₄ and 2% biochar (TG3). Compared to CP, TG1-3 had a lower total nitrogen loss rate, and TG3 resulted in reduced NH₃ (52.4%) and N₂O (35.6%) emissions to mitigate nitrogen loss. The abundance of amoA and narG gene in TG3 was higher than in the other groups, and TG3 was beneficial to the growth of Proteobacteria and Actinobacteria. According to redundancy and Pearson analysis, TG3 had a positive effect on the nitrification process by increasing the abundance of amoA and narG. Thus, biochar and FeSO₄ addition mitigate nitrogen loss by regulating the nitrification processes.

Aerobic co-composting of mature compost with cattle manure: organic matter conversion and microbial community characterization

The production of organic fertilizer by aerobic composting of cattle manure is an important way of its resource utilization. This study evaluated the effects of adding mature compost on the decomposition and microbial communities in the aerobic composting of cattle manure. The addition of mature compost shortens the composting cycle and results in a final lignocellulosic degradation rate of 35%. Metagenomic analysis showed that this was due to the proliferation of thermophilic and organic matter-degrading functional microorganisms, which enhanced the activity of carbohydrate-active enzymes. With the addition of mature compost, the microbial community exhibited stronger metabolic functions, especially carbohydrate and amino acid metabolism, which are the driving forces of organic matter degradation. This study deepens the understanding of organic matter conversion and microbial community metabolic functions when mature compost is used for livestock manure composting and provides a promising technology for livestock manure composting.

Sustainable management and recycling of anaerobic digestate solid fraction by composting: A review

The aim of the study was to review and discuss the management and recycling of anaerobic digestate solid fraction by composting process in the context of circular bioeconomy and sustainable development. The conversion of the solid fraction into compost can be recognized as novel process-enhancing supplements for land reclamation. Moreover, the solid fraction of the digestate is a valuable substrate for compost production, both as a monosubstrate and as a valuable additive for other raw materials to enrich in organic matter. These results should serve as reference point to target adjusting screws for anaerobic digestate solid fraction by composting process improvement, its implementation in modern bioeconomy perspective as well as provide a guideline for effective waste management.

Measures for Controlling Gaseous Emissions during Composting: A Review

Composting is a promising technology for treating organic solid waste. However, greenhouse gases (methane and nitrous oxide) and odor emissions (ammonia, hydrogen sulfide, etc.) during composting are practically unavoidable, leading to severe environmental problems and poor final compost products. The optimization of composting conditions and the application of additives have been considered to mitigate these problems, but a comprehensive analysis of the influence of these methods on gaseous emissions during composting is lacking. Thus, this review summarizes the influence of composting conditions and different additives on gaseous emissions, and the cost of each measure is approximately evaluated. Aerobic conditions can be achieved by appropriate process conditions, so the contents of CH4 and N2O can subsequently be effectively reduced. Physical additives are effective regulators to control anaerobic gaseous emissions, having a large specific surface area and great adsorption performance. Chemical additives significantly reduce gaseous emissions, but their side effects on compost application must be eliminated. The auxiliary effect of microbial agents is not absolute, but is closely related to the dosage and environmental conditions of compost. Compound additives can reduce gaseous emissions more efficiently than single additives. However, further study is required to assess the economic viability of additives to promote their large-scale utilization during composting.

Effects of additives on the co-composting of forest residues with cattle manure

Co-composting of forest residues (FR) with cattle manure (CM) results in a low nitrogen (N) conversion efficiency, a low organic matter (OM) degradation rate, and a low quality compost product. This study evaluated the effects of addition of bone charcoal (BC), pumice (PM), or straw biochar (SB) at a ratio of 10 % (w/w) on the co-composting of FR with CM. The highest quality compost was obtained with addition of 10 % PM. Compared with the control (without any additive), PM addition increased the OM degradation rate, the nitrate-N, the available phosphorus, and the available potassium by 25 %, 110 %, 24 %, and 9 %, respectively, and increased the relative abundance of bacteria (Planomicrobium, Flavobacterium, and Pseudomonas) involved in lignocellulose degradation and N transformation. With the addition of PM, the co-composting of FR with CM generated a high quality, useful product in only 39 days.

Combined addition of biochar, lactic acid, and pond sediment improves green waste composting

Composting, as an eco-friendly method to recycle green waste (GW), converts the GW into humus-like compounds. However, conventional GW composting is inefficient and generates poor-quality compost. The objective of this research was to investigate the effects of the combined additions of biochar (BC; 0, 5, and 10 %), lactic acid (LA; 0, 0.5, and 1.0 %), and pond sediment (PS; 0, 20, and 30 %) on GW composting. A treatment without additives served as the control (treatment T1). The results showed that treatment R1 (with 5 % BC, 0.5 % LA, and 20 % PS) was better than the treatments with two additives or no additive and required only 32 days to generate a stable and mature product. Compared with T1, R1 improved water-holding capacity, electrical conductivity, available phosphorus, available potassium, nitrate nitrogen, OM decomposition, and germination index by 51 %, 48 %, 170 %, 93 %, 119 %, 157 %, and 119 %, respectively. R1 also increased the activities of cellulase, lignin peroxidase, and laccase. The results showed that the combined addition of BC, LA, and PS increased the gas exchange, water retention, and the microbial secretion of enzymes, thus accelerating the decomposition of GW. This study demonstrated the effects of BC, LA, and PS addition on GW composting and final compost properties, and analyzed the reasons of the effects. The study therefore increases the understanding of the sustainable disposal of an important solid waste.

Simultaneous reductions in antibiotic, antibiotic resistance genes and nitrogen loss during bioaugmentation tylosin fermentation dregs co-composting

Considering the main problems presented in the typical solid wastes antibiotic fermentation dregs (AFDs) composting that the residual antibiotics could result in the propagation of antibiotic resistance genes (ARGs), and the reduced value of agronomic production caused by the ammonia gas (NH₃) emissions. This study established a bio-augmented tylosin fermentation dregs (TFDs) aerobic co-composting system to investigate the effects of a novel isolated high-efficiency strain Klebsiella sp. TN-1 inoculation on tylosin degradation, reduction in ammonia emissions, and ARG abundances during this process. Results showed that the application of strain Klebsiella sp. TN-1 extended the thermophilic stage and promoted compost maturity. Moreover, bio-enhanced co-composting with strain Klebsiella sp. TN-1 led to a totally degradation of tylosin, and removed most of ARGs, metal resistance genes (MRGs) and mobile genetic elements (MGEs), and also effectively reduce ammonia emission by 49.76 %.via increasing ammoxidation rates. Principal co-ordinates analysis further suggested that the strain Klebsiella sp. TN-1 had little influence on the bacterial community composition, while the changes of other physical and chemical properties during this process were the main reasons for the evolution of bacterial community and propagation of ARGs in the TFDs co-composting. This study suggests the potential of the bio-enhanced strain Klebsiella sp. TN-1 for antibiotic biodegradation and its application for nitrogen conservation in the AFDs co-composting process, which could decrease the risk of ARGs spreading and make compost products more secure.