Consolidated microbial production of four-, five-, and six-carbon organic acids from crop residues: Current status and perspectives

Direct and robust citramalate production from brown macroalgae using fast-growing Vibrio sp. dhg

Brown macroalgae is a promising feedstock for biorefinery owing to its high biomass productivity and contents of carbohydrates such as alginate and mannitol. However, the limited availability of microbial platforms efficiently catabolizing the brown macroalgae sugars has restricted its utilization. In this study, the direct production of citramalate, an important industrial compound, was demonstrated from brown macroalgae by utilizing Vibrio sp. dhg, which has a remarkably efficient catabolism of alginate and mannitol. Specifically, citramalate synthase from Methanocaldococcus jannaschii was synthetically expressed, and competing pathways were removed to maximally redirect the carbon flux toward citramalate production. Notably, a resulting strain, VXHC, produced citramalate up to 9.8 g/L from a 20 g/L mixture of alginate and mannitol regardless of their ratios. Citramalate was robustly produced even when diverse brown macroalgae were provided directly. Collectively, this study showcased the high potential of brown macroalgae biorefinery using Vibrio sp. dhg.

Heterotrophic growth of Galdieria sulphuraria on residues from aquaculture and fish processing industries

The study aimed at zero-waste utilization of fish processing streams for cultivation of microalgae Galdieria sulphuraria. Wastewater from a fish processing facility, slam (mix of used fish feed and faeces), and dried pellet (sediments after enzymatic hydrolysis of rainbow trout) were investigated as potential sources of carbon, nitrogen, and phosphate for cultivation of G. sulphuraria. The pellet extract was found to support the growth of G. sulphuraria when appropriate diluted, at concentrations below 40 % (v/v). It was revealed that wastewater does not impact the growth negatively, however free amino nitrogen and carbon sources need to be supplied from another source. Therefore, only proteolyzed pellet extract (20 %, v/v) was selected for upscaling and a biomass concentration of 80 g L^-1 (growth rate was 0.72 day^-1) was achieved in a non-sterile fed-batch culture. Even though biomass was produced under non-sterile conditions no pathogens such as Salmonella sp. could be detected.

Sugarcane wastes as microbial feedstocks: A review of the biorefinery framework from resource recovery to production of value-added products

Sugarcane industry is a major agricultural sector capable of producing sugars with byproducts including straw, bagasse, and molasses. Sugarcane byproducts are no longer wastes since they can be converted into carbon-rich resources for biorefinery if pretreatment of these is well established. Considerable efforts have been devoted to effective pretreatment techniques for each sugarcane byproduct to supply feedstocks in microbial fermentation to produce value-added fuels, chemicals, and polymers. These value-added chains, which start with low-value industrial wastes and end with high-value products, can make sugarcane-based biorefinery a more viable option for the modern chemical industry. In this review, recent advances in sugarcane valorization techniques are presented, ranging from sugarcane processing, pretreatment, and microbial production of value-added products. Three lucrative products, ethanol, 2,3-butanediol, and polyhydroxyalkanoates, whose production from sugarcane wastes has been widely researched, are being explored. Future studies and development in sugarcane waste biorefinery are discussed to overcome the challenges remaining.

Production of polyhydroxyalkanoates containing monomers conferring amorphous and elastomeric properties from renewable resources: Current status and future perspectives

Petrochemical-based plastics cause environmental pollution and threaten humans and ecosystems. Polyhydroxyalkanoate (PHA) is considered a promising alternative to nondegradable plastics since it is eco-friendly and biodegradable polymer having similar properties to conventional plastics. PHA's material properties are generally determined by composition and type of monomers in PHA. PHA can be designed in tailor-made manner for their suitable application areas. Among many monomers in PHAs, ω-hydroxalkanoates such as 3-hydroxypropionate (3HP), 4-hydroxybutyrate (4HB), 5-hydroxyvalerate (5HV), and 6-hydroxyhexanoate (6HHx) and medium-chain-length 3-hydroxyalkanoate such as 3-hydroxyhexanoate (3HHx) and 4-hydroxyvalerate (4HV), have been examined as potential monomers able to confer amorphous and elastomer properties when these are incorporated as comonomer in poly(3-hydroxybutyrate) copolymer that has 3HB as main monomer along with comonomers in different monomer fraction. Herein, recent advances in production of PHAs designed to have amorphous and elastomeric properties from renewable sources such as lignocellulose, levulinic acid, crude glycerol, and waste oil are discussed.

Valorization of lignocellulosic biomass for polyhydroxyalkanoate production: Status and perspectives

With the increasing concerns regarding climate, energy, and plastic crises, bio-based production of biodegradable polymers has become a dire necessity. Significant progress has been made in biotechnology for the production of biodegradable polymers from renewable resources to achieve the goal of zero plastic waste and a net-zero carbon bioeconomy. In this review, an overview of polyhydroxyalkanoate (PHA) production from lignocellulosic biomass (LCB) was presented. Having established LCB-based biorefinery with proper pretreatment techniques, various PHAs could be produced from LCB-derived sugars, hydrolysates, and/or aromatic mixtures employing microorganisms. This provides a clue for addressing the current environmental crises because "biodegradable polymers" could be produced from one of the most abundant resources that are renewable and sustainable in a "carbon-neutral process". Furthermore, the potential future of LCB-to-non-natural PHA production was discussed with particular reference to non-natural PHA biosynthesis methods and LCB-derived aromatic mixture biofunnelling systems.