Noval green sodium alginate/gellan gum aerogel with 3D hierarchical porous structure for highly efficient and selective removal of Congo red from water

Regulating the Surface State of Carbon Dots as Ultrahigh-Capacity Adsorbents for Water Treatment

Adsorption is one of the most widely researched and highly effective methods for mitigating the environmental threat posed by recalcitrant dyes in aqueous solutions. This paper presents a solvent-free synthesis method for the rapid and large-scale production of nitrogen (N) and phosphorus (P) co-doped carbon dots (N, P-CDs) which possess specific surface states and outstanding dye adsorption properties. Compared to the undoped CDs, the N, P-CDs not only exhibit a higher yield of solid-state luminescence but also endow them with the efficient adsorption and removal of Congo red (CR) from water. Due to the synergistic effects of π-π stacking, hydrogen bonding and electrostatic attraction, the N, P-CDs exhibit an ultra-high adsorption capacity (3118.87 mg g-1) and a removal efficiency (97.4%, at 500 mg L-1) for CR, and also display excellent selective adsorption in both single-dye and dual-dye systems. This method offers a rational strategy for synthesizing novel CDs-based adsorbents for CR, which provides a demonstration for future dye adsorption studies and practical wastewater treatment applications of CDs.

Removal of Hazardous Organic Dyes from Liquid Wastes Using Advanced Nanomaterials

The presence of organic dyes in aqueous environments is extremely hazardous to life due to the toxicity of these compounds. Thus, its removal from these various aquatic media is of the utmost importance, and several technologies are constantly being tested to meet this goal. Among these technologies, various types of degradation and adsorption techniques are typically used, and of the various types of materials used within these technologies, nanomaterials are constantly being developed and investigated, likely due to the various properties that these nanomaterials have. This work reviewed recent developments (in 2023) about the use of these nanomaterials in the treatment of solutions contaminated with these toxic organic dyes.

Sodium alginate based adsorbent: Facile fabrication, extraordinary removal efficacy of anionic dyes and adsorption mechanism

Eco-friendly and renewable sodium alginate, as a potential alternative to fossil resources, has attracted considerable attention in wastewater treatment field. Herein, we develop a SA/PEI/PEG (sodium alginate/polyethyleneimine/polyethylene glycol diglycidyl ether) adsorbent in which SA was functionalized by PEI/PEG via a facile but effective strategy of one-pot gelation of aqueous SA/PEI/PEG solution. Systematic investigations were accomplished to explore the effects of adsorbent factors on the adsorption performances of the adsorbent towards the anionic dyes CR (congo red), AB-10B (amido black-10B), and AB-25 (acid blue-25). Strikingly, the SA/PEI/PEG exhibited exceptional adsorption performance to CR (2782 mg g-1, 90.6 %), AB-10B (1369 mg g-1, 90.9 %) and AB-25 (4221 mg g-1, 92.6 %) at 30 °C, pH = 3, 200 r min-1 and oscillated 24 h, and demonstrating exceptional reusability after six cycles of adsorption-desorption cycles. Furthermore, the three kinetic, four isothermic and one thermodynamic models were used to investigate the adsorption behaviors of the adsorbent towards these dyes. The possible adsorption mechanism is suggested: Hydrogen bond interactions and electrostatic attractions between SA/PEI/PEG and the dyes primarily contribute to exceptional adsorption capacity. The SA/PEI/PEG adsorbent endowed with easy fabrication, extraordinary adsorption capacity and excellent reusability promises potential application prospects in wastewater purification industry.

A critical review of sodium alginate-based composites in water treatment

The global freshwater crisis is a pressing issue, especially in areas with little rainfall and inner continental regions. The growing attention to water scarcity has induced increased interest in research on advanced water treatment technologies. As an abundant bioactive material in nature, sodium alginate (SA) has been widely used in water management due to its outstanding water absorption and holding ability, reversible swelling property, and pollutant adsorption performance. Building on this, progress made in using various modified forms of SA to access clean water is addressed in this review. Covering studies concern the adsorption and separation of pollutants in wastewater by SA-based absorbents and freshwater harvesting by SA-based collectors. This review explores SA-based composites' composition-structure-construction designs and emphasizes the impact of materials like inorganic materials, functional polymers, and porous matrices and how they can be exploited for water treatment. It also highlights the mechanisms of contaminants adsorption and freshwater desorption of SA-based composites. Finally, the shortcomings and future orientation of SA-based composites are proposed, including performance optimization, structural modification, application expansion, and mechanism in-depth investigation. This review aims to offer a theoretical basis and technical guidance for the use of natural materials to respond to the shortage of freshwater resources.

Multifunctional amphibious superhydrophilic-oleophobic cellulose nanofiber aerogels for oil and water purification

Aerogels are of a popular choice for oil-water separation and water purification due to their attractive properties, such as lightweight, large surface area, and high porosity. Developing robust aerogels with multifunctional characteristics is highly desirable but remains challenging nowadays. Herein, we develop a facile one-pot condensation strategy for the fabrication of superhydrophilic-oleophobic (SHI-OP) composite aerogels using cellulose nanofibers (CNF), 3-glycidy-loxypropyl trimethoxysilane (GPTMS), polyethyleneimine (PEI) and fluorine-contained compound (FS-60). The resulted aerogels exhibit a directional lamellar structure with interconnected macropores, super-lightweight with high porosity of 98.30 % and low density of 0.0256 g·cm-3. Also, the aerogels are mechanically durable against repeated compression. Meanwhile, the amphibious SHI-OP feature of the composite aerogels in both air and water states enables them to not only absorb trace amount of water from contaminated oils, but also separate oil-water mixtures with separation efficiency of over 99 % and high permeation flux of over 9060 L/m2·h. Moreover, the aerogels also show excellent dye adsorption capability and reusability toward anionic dyes with a maximum adsorption capacity of 1245.68 mg/g. Such robust and multifunctional aerogels with special surface wettability provide good opportunity for liquid purification and dye-containing wastewater treatment.

Rapid, Massive, and Green Synthesis of Polyoxometalate-Based Metal-Organic Frameworks to Fabricate POMOF/PAN Nanofiber Membranes for Selective Filtration of Cationic Dyes

Developing high-efficiency membrane materials for the rapid removal of organic dyes is crucial but remains a challenge. Polyoxometalates (POMs) clusters with anionic structures are promising candidates for the removal of cationic dyes via electrostatic interactions. However, their shortcomings, such as their solubility and inability to be mass-produced, hinder their application in water pollution treatment. Here, we propose a simple and green strategy utilizing the room temperature stirring method to mass produce nanoscale polyoxometalate-based metal-organic frameworks (POMOFs) with porous rhomboid-shaped dodecahedral and hexagonal prism structures. The products were labeled as POMOF1 (POMOF-PW12) and POMOF2 (POMOF-PMo12). Subsequently, a series of x wt% POMOF1/PAN (x = 0, 3, 5, and 10) nanofiber membranes (NFMs) were prepared using electrospinning technology, where polyacrylonitrile (PAN) acts as a "glue" molecule facilitating the bonding of POMOF1 nanoparticles. The as-prepared samples were comprehensively characterized and exhibited obvious water stability, as well as rapid selective adsorption filtration performance towards cationic dyes. The 5 wt% POMOF1/PAN NFM possessed the highest removal efficiency of 96.7% for RhB, 95.8% for MB, and 86.4% for CV dyes, which realized the selective separation over 95% of positively charged dyes from the mixed solution. The adsorption mechanism was explained using FT-IR, SEM, Zeta potential, and adsorption kinetics model, which proved that separation was determined via electrostatic interaction, hydrogen bonding, and π-π interactions. Moreover, the POMOF1/PAN membrane presented an outstanding recoverable and stable removal rate after four cycles. This study provides a new direction for the systematic design and manufacture of membrane separation materials with outstanding properties for contaminant removal.

Promising adsorbent for dye detoxification: Exploring the potential of chitosan sodium carboxymethylcellulose silk fibroin aerogel

The main goal of this study is to create a CS-CMC-SF aerogel consisting of chitosan sodium carboxymethylcellulose and silk fibroin. The aerogel is designed to remove types of dyes from water while also being environmentally friendly. This innovative adsorbent has been optimized for extracting both cationic and anionic dyes from solutions. It incorporates chitosan sodium carboxymethylcellulose and silk filament fibers to enhance its strength. Experimental data illustrates that the CS-CMC-SF aerogel possesses remarkable adsorption capabilities - 5461.77 mg/g for Congo Red (CR), 2392.83 mg/g for Malachite Green (MG), and 1262.20 mg/g for Crystal Violet (CV). A kinetic study aligns with the pseudo-second-order kinetic model suggesting predominant chemisorption phenomena occur during adsorption process. Isotherm analysis further identifies multilayered adsorption occurring on irregularly shaped surfaces of the aerogel while thermodynamic assessments validate exothermic and spontaneous characteristics inherent in its absorption mechanism. Several analytical methods such as SEM, FT-IR, XRD, and XPS were employed to examine physicochemical attributes tied to this unique material design conceptually; identifying mechanisms including pore filling, π-π interactions, ion exchange activity, electrostatic connections along with hydrogen bonding inducing overall superior performance output. Furthermore substantial soil biodegradability alongside compostable features associated with our proposed CS-CMC-SF aerogels established it's potential suitability within applications demanding sustainable options thereby validating its underlying ecological credibility.

High-efficient removal of anionic dye from aqueous solution using metal-organic frameworks@chitosan aerogel rich in benzene structure

With the exponentially increase of dye pollutants, the purification of dye wastewater has been an urgent ecological problem. As a novel type of porous adsorbent, metal-organic frameworks still face challenges in recyclability, agglomeration, and environmentally unfriendly synthesis. Herein, MOF-525 was in-situ growth onto the surface of the chitosan (CS) beads to fabricate MOF-525@CS aerogel. CS was utilized as substrate to uniformly disperse MOF-525, thereby significantly mitigating agglomeration and improving recyclability of MOF-525. The characterization results shown that MOF-525@CS aerogel had a high specific surface area of 103.0 m2·g-1, and MOF-525 was uniformly distributed in the 3D porous structure of CS, and the presence of benzoic acid was detected. The MOF-525@CS aerogel had a remarkable adsorption capacity of 1947 mg·g-1 for Congo red, which is greater than the sum of its parts. MOF-525@CS aerogel also inherited the rapid adsorption ability of MOF-525, removing 80 % of Congo red within 600 min. Such excellent adsorption performance can be attributed to the benzoic acid trapped by CS via CN band to enhance the π-π stacking interactions. Additionally, the utilization of benzoic acid makes the synthesis process of MOF-525@CS aerogel more environmentally friendly. The high-efficient MOF-525@CS aerogel is a competitive candidate for dye pollution adsorption.