Lignin recovery from cocoa bean shell using microwave-assisted extraction and deep eutectic solvents

Valorization of citrus peel industrial wastes for facile extraction of extractives, pectin, and cellulose nanocrystals through ultrasonication: An in-depth investigation

In this work we developed an eco-friendly valorisation of Citrus wastes (CWs), through a solvent-assisted ultrasonication extraction technique, thus having access to a wide range of bio-active compounds and polysaccharides, extremely useful in different industrial sectors (food, cosmetics, nutraceutical). Water-based low-amplitude ultrasonication was examined as a potential method for pectin extraction as well as polar and non-polar citrus extractives (CEs), among which hesperidin and triglycerides of 18 carbon fatty acids were found to be the most representative ones. In addition, citric acid:glycerol (1:4)-based deep eutectic solvent (DES) in combination with ultrasonic extraction was utilized to extract microcellulose (CMC), from which stable cellulose nanocrystals (CNCs) with glycerol-assisted high amplitude ultrasonication were obtained. The physical and chemical properties of the extracted polysaccharides (pectin, micro and nanocellulose) were analysed through DLS, ζ-potential, XRD, HP-SEC, SEM, AFM, TGA-DSC, FTIR, NMR, and PMP-HPLC analyses. The putative structure of the extracted citrus pectin (CP) was analysed and elucidated through enzyme-assisted hydrolysis in correlation with ESI-MS and monosaccharide composition. The developed extraction methods are expected to influence the industrial process for the valorisation of CWs and implement the circular bio-economy.

Isolation and Structural Characterization of Natural Deep Eutectic Solvent Lignin from Brewer's Spent Grains

Brewer's spent grains (BSG) offer valuable opportunities for valorization beyond its conventional use as animal feed. Among its components, lignin-a natural polymer with inherent antioxidant properties-holds significant industrial potential. This work investigates the use of microwave-assisted extraction combined with acidic natural deep eutectic solvents (NaDESs) for efficient lignin recovery, evaluating three different NaDES formulations. The results indicate that choline chloride-lactic acid (ChCl-LA), a NaDES with superior thermal stability as confirmed via thermogravimetric analysis (TGA), is an ideal solvent for lignin extraction at 150 °C and 15 min, achieving a balance of high yield and quality. ChCl-LA also demonstrated good solubility and cell disruption capabilities, while microwaves significantly reduced processing time and severity. Under optimal conditions, i.e., 150 °C, 15 min, in the presence of ChCl-LA NaDES, the extracted lignin achieved a purity of up to 79% and demonstrated an IC50 (inhibitory concentration 50%) of approximately 0.022 mg/L, indicating a relatively strong antioxidant activity. Fourier transform infrared (FTIR) and 2D-HSQC NMR (heteronuclear single quantum coherence nuclear magnetic resonance) spectroscopy confirmed the successful isolation and preservation of its structural integrity. This study highlights the potential of BSG as a valuable lignocellulosic resource and underscores the effectiveness of acidic NaDESs combined with microwave extraction for lignin recovery.

Research progress in the preparation of lignin-based carbon nanofibers for supercapacitors using electrospinning technology: A review

With the development of renewable energy technologies, the demand for efficient energy storage systems is growing. Supercapacitors have attracted considerable attention as efficient electrical energy storage devices because of their excellent power density, fast charging and discharging capabilities, and long cycle life. Carbon nanofibers are widely used as electrode materials in supercapacitors because of their excellent mechanical properties, electrical conductivity, and light weight. Although environmental factors are increasingly driving the application of circular economy concepts in materials science, lignin is an underutilized but promising environmentally benign electrode material for supercapacitors. Lignin-based carbon nanofibers are ideal for preparing high-performance supercapacitor electrode materials owing to their unique chemical stability, abundance, and environmental friendliness. Electrospinning is a well-known technique for producing large quantities of uniform lignin-based nanofibers, and is the simplest method for the large-scale production of lignin-based carbon nanofibers with specific diameters. This paper reviews the latest research progress in the preparation of lignin-based carbon nanofibers using the electrospinning technology, discusses the prospects of their application in supercapacitors, and analyzes the current challenges and future development directions. This is expected to have an enlightening effect on subsequent research.

Sustainable extraction of polyphenols from vine shoots using deep eutectic solvents: Influence of the solvent, Vitis sp., and extraction technique

Vine shoots are the main by-products of grapevine pruning with no added value. In the present study, deep eutectic solvents (DESs) were used as alternatives to traditional chemical solvents, for the extraction of phytochemicals from grapevine shoots. Three levulinic acid-based DESs were tested for the first time, and their performance was compared to methanol (a standard chemical solvent) regarding the extraction of phenolic compounds from thirteen Vitis sp. shoots. Two extraction methods have been applied: ultrasound-assisted extraction and solid-liquid extraction. A total of eleven polyphenols which belongs to four families (proanthocyanins, stilbenes, hydroxycinnamic acids, and flavonols) have been identified and quantified in the extracts. The statistical analysis shows that the levulinic acid-based DES systems are novel and important alternatives to chemical solvents due to favourable eco-friendly properties and remarkable extraction performance of polyphenols. On the other hand, the ultrasound-assisted extraction technique has significantly increased the extraction rate in comparison to the solid-liquid extraction method with p-values lower than 0.05 for most compounds. The genetic factor has been shown to play an important role in the content of extracted polyphenols, being V. riparia pubescente the one that presented the highest concentrations of extracted polyphenols. Finally, the polyphenol-enriched extracts have proven important properties such as antioxidant activity and significant delay in bacteria growth against both gram-positive and gram-negative bacteria. It is important to note that, to the best of our knowledge, this is the first time that deep eutectic solvents have been used for the extraction of bioactive compounds from vine shoot residues.

Efficient separation and production of high-quality rubber, lignin nanoparticles and fermentable sugars from Eucommia ulmoides pericarp via deep eutectic solvent pretreatment

The natural barriers of lignocellulose hinder the separation of Eucommia ulmoides rubber (EUR) from Eucommia ulmoides pericarp (EUP), whereas traditional separation methods normally lead to the waste of Eucommia ulmoides lignocellulose resource and environmental pollution. In this study, an acidic deep eutectic solvent composed of lactic acid and ZnCl2 was developed as a pretreatment medium to reduce the separation barriers of EUR while producing lignin nanoparticles and fermentable sugars. Results showed that DES pretreatment could accelerate the extraction efficiency (91.0 %) and purity (>99 %) of EUR and maintain its chemical structure compared to the traditional alkaline and mechanical methods. Meanwhile, the regenerated nano-lignin showed excellent antioxidant activity (IC50 = 46.3 μg/mL) comparable to commercial antioxidant BHA. Besides, the enzymatic hydrolysis efficiency of EUP with DES pretreatment was significantly enhanced about 9 times than the control groups. Overall, the acidic DES pretreatment could be considered a promising pretreatment method for separation of high-quality EUR and valorization of lignocellulosic components.

Co-production of 2,5-dihydroxymethylfuran and furfuralcohol from sugarcane bagasse via chemobiocatalytic approach in a sustainable system

2,5-Dihydroxymethylfuran and furfuryl alcohol serve as versatile building-blocks in pharmaceuticals, polymers, and value-added intermediates. To develop an efficient and sustainable method for their production from biomass, a combined approach using deep eutectic solvent Citric acid:Betaine (CTA:BT) for bagasse catalysis and recombinant E. coli SCFD23 for bioreduction of bagasse-derived 5-hydroxymethylfurfural and furfural was devised. Bagasse was effectively transformed into 5-hydroxymethylfurfural (48 mM) and furfural (14 mM) in CTA:BT (8 wt%)-water at 170 °C for 30 min. Bioreduction of 5-hydroxymethylfurfural and furfural by SCFD23 cell co-expressing formate dehydrogenase and NAD(P)H-dependent aldehyde reductase (SsCR) yielded 2,5-dihydroxymethylfuran (90.0 % yield) and furfuryl alcohol (99.0 % yield) in 6 h, using biomass-derived formic acid, xylose and glucose as co-substrates. Molecular docking confirmed the stable binding and reductase activity of SsCR with the biomass-derived 5-hydroxymethylfurfural and furfural. An efficient and eco-friendly chemobiological approach was applied for co-production of 2,5-dihydroxymethylfuran and furfuryl alcohol from biomass in one-pot two-step reaction.

Recent advances in biorefineries based on lignin extraction using deep eutectic solvents: A review

Considering the urgent need for alternative biorefinery schemes based on sustainable development, this review aims to summarize the state-of-the-art in the use of deep eutectic solvent pretreatment to fractionate lignocellulose, with a focus on lignin recovery. For that, the key parameters influencing the process are discussed, as well as various strategies to enhance this pretreatment efficiency are explored. Moreover, this review describes the challenges and opportunities associated with the valorization of extraction-derived streams and highlights recent advancements in solvent recovery techniques. Furthermore, the utilization of computational models for process design and optimization is introduced, as the initial attempts at the economic and environmental assessment of this lignocellulosic bioprocess based on deep eutectic solvents. Overall, this review offers a comprehensive perspective on the recent advances in this emerging field and serves as a foundation for further research on the potential integration of deep eutectic pretreatment in sustainable multi-product biorefinery schemes.

The coupling effects between acid-catalyzed hydrothermal pretreatment and acidic/alkaline deep eutectic solvent extraction for wheat straw fractionation

Mild hydrothermal pretreatment (HP) integrating with solvent extraction is a promising two-step technique to enhance the overall lignin and carbohydrate output for lignocellulose fractionation. This work comparatively assessed the coupling effect between mild HP (the first step) and the emerging acidic choline chloride-natural acid or alkaline choline hydroxide based deep eutectic solvents (DES, the second step) for wheat straw fractionation. It was shown HP with 0.3% p-toluenesulfonic acid (p-TsOH) catalyst achieved a good compromise between complete hemicellulose removal (nearly 100%) and high cellulose recovery (99.2%). While choline hydroxide based DES showed better coupling effect with HP than choline chloride-natural acid DES, corresponding to 75.6 and 31.2% lignin removal respectively. It was proposed that the alkaline DES enhanced lignocellulose swelling the lignin phenolic hydroxyl groups deprotonation and thus facilitating lignin solubilization despite of its condensation at HP. Therefore, the alkaline DES resulting cellulose-rich fraction exhibited higher potential for further processing.

Depolymerization of lignin: Recent progress towards value-added chemicals and biohydrogen production

The need for alternative sources of energy became increasingly urgent as demand for energy and the use of fossil fuels both soared. When processed into aromatic compounds, lignin can be utilized as an alternative to fossil fuels, however, lignin's complex structure and recalcitrance make depolymerization impractical. This article presented an overview of the most recent advances in lignin conversion, including process technology, catalyst advancement, and case study-based end products. In addition to the three established methods (thermochemical, biochemical, and catalytic depolymerization), a lignin-first strategy was presented. Depolymerizing different forms of lignin into smaller phenolic molecules has been suggested using homogeneous and heterogeneous catalysts for oxidation or reduction. Limitations and future prospects of lignin depolymerization have been discussed which suggests that solar-driven catalytic depolymerization through photocatalysts including quantum dots offers a unique pathway to obtain the highly catalytic conversion of lignin.

Preparation of water-insoluble lignin nanoparticles by deep eutectic solvent and its application as a versatile and biocompatible support for the immobilization of α-amylase

As one of the most abundant biopolymers, lignin is a widely available resource. However, its potential largely remains untapped, with most of it ending up as waste from industries like paper production, pulp processing, and bio-refining. The research undertaken in this study focused on the extraction of lignin from agroforestry waste using a deep eutectic solvent (DES) as a carrier for α-amylase immobilization, resulting in high stability and reusability. Several techniques, including Nuclear Magnetic Resonance (NMR), Scanning Electron Microscopy (SEM), Energy-Dispersive X-ray Spectroscopy (EDS), and the Brunauer-Emmett-Teller (BET) method were employed to examine the structure and morphology of both the extracted lignin and the immobilized enzyme. The temperature used to recover lignin by DES would affect immobilization efficiency and enzyme loading by influencing its specific surface area, pore size, and volume distribution. Investigations using Nuclear Overhauser Effect Spectroscopy (NOESY) uncovered that the hydroxyl groups in G, H, and S units and the β-O-4 structure of lignin primarily serve as binding sites for enzyme molecules. Immobilized α-amylase demonstrated a higher pH and thermal stability level, with an optimal pH of 7.0 and temperature of 100 °C, compared to the free enzyme, which exhibited optimal activity at a pH of 6.5 and temperature of 90 °C. Importantly, immobilized α-amylase retained >80 % of its initial activity even after 28 days at room temperature, and it maintained 70 % of its activity after being reused 12 times. These findings strongly suggest that lignin derived from agroforestry residues holds promising potential as a future versatile immobilization material, a prospect integral to society's sustainable development.

Microwave-assisted quick synthesis of microcrystalline cellulose from black tea waste (Camellia sinensis) and characterization

Tea wastes generated in the industries during tea production processes show excellent potential to be used as a renewable, abundant, and cheap source for the extraction of microcrystalline cellulose. In the current work, MCC was isolated from black tea waste through microwave heating instead of using conventional heating and avoiding the traditional acid hydrolysis method. Microwave increased the reaction speed significantly and resulted in very quick delignification and bleaching of black tea waste to isolate MCC in white powdered form. FTIR, XRD, FESEM, and TGA analysis were then carried out to investigate the chemical functionality, crystallinity, morphology, and thermal properties, respectively, of the synthesized tea waste MCC. The characterization results demonstrated that cellulose with a short rough fibrous structure having an average particle size of around 23 μm was extracted. The results of FTIR and XRD demonstrated unequivocally that all amorphous non-cellulosic compounds had been eliminated. The microwave-extracted black tea waste MCC showed 89.77 % crystallinity and good thermal properties, indicating that it could be a promising filler material for preparing polymer composites. Therefore, microwave-assisted delignification and bleaching can be used as a suitable, energy-efficient, time-saving and low-cost method for extracting MCC from the black tea waste produced in tea factories.