Detection of TP53 mutation using a portable surface plasmon resonance DNA-based biosensor

Immobilization-free and label-free electrochemical DNA biosensing based on target-stimulated release of redox reporter and its catalytic redox recycling

Herein, we demonstrate a simple, homogenous and label-free electrochemical biosensing system for sensitive nucleic acid detection based on target-responsive porous materials and nuclease-triggered target recycling amplification. The Fe(CN)63- reporter was firstly sealed into the pores of Fe3O4 nanoparticles by probe DNA. Target DNA recognition triggered the controllable release of Fe(CN)63- for the redox reaction with the electron mediator of methylene blue enriched in the dodecanethiol assembled electrode and thereby generating electrochemical signal. The exonuclease III (Exo III)-assisted target recycling and the catalytic redox recycling between Fe(CN)63- and methylene blue contributed for the enhanced signal response toward target recognition. The low detection limit toward target was obtained as 478 fM and 1.6 pM, respectively, by square wave voltammetry and cyclic voltammetry methods. It also possessed a well-discrimination ability toward mismatched strands and high tolerance to complex sample matrix. The coupling of bio-gated porous nanoparticles, nuclease-assisted target amplification and catalytic redox recycling afforded the sensing system with well-controllable signal responses, sensitive and selective DNA detection, and good stability, reusability and reproducibility. It thus opens a new avenue toward the development of simple but sensitive electrochemical biosensing platform.

Gradient nanoplasmonic imaging metasurface for rapid and label-free detection of SARS-CoV-2 sequences

Compact and user-friendly nucleic acid biosensors play a crucial role in advancing infectious disease research, particularly for coronavirus (COVID-19). While nanophotonic metasurface sensors hold promise for high-performance sensing, they face challenges due to their complexity and bulky readout instruments. In this study, we propose a gradient nanoplasmonic imaging (GNI) metasurface that incorporates the concept of an optical potential well, enabling label-free single-step detection of SARS-CoV-2 sequences. The metasurface sensor consists of nanopillars with continuous variations, forming an optical potential well that results in a centimeter-scale dark ring. This dynamic well exhibits high sensitivity to refractive index changes, recorded by a CCD. To further enhance the visualized sensing performance, plasmonic coupling of gold nanoparticles with the gold nanostructure is employed. Our metasurface-based biosensor achieves rapid single-step detection of SARS-CoV-2 sequences, with a low detection limit of 77.2 pM and a detection range of 0.1-100 nM. This biosensor not only demonstrates exceptional reproducibility and outstanding detection performance, but also maintains remarkable specificity in differentiating SARS-CoV-2 from other diseases with similar symptoms. This simple and spectrometer-free refractometric sensing scheme enables the construction of a compact and cost-efficient prototype. Our imaging-based metasurface biosensing strategy demonstrates valuable merits for rapid, sensitive, and quantitative detection, showcasing its potential as a valuable on-site nucleic acid diagnostic tool.

Recent Advances in Biosensor Technology for Early-Stage Detection of Hepatocellular Carcinoma-Specific Biomarkers: An Overview

Hepatocellular carcinoma is currently the most common malignancy of the liver. It typically occurs due to a series of oncogenic mutations that lead to aberrant cell replication. Most commonly, hepatocellular carcinoma (HCC) occurs as a result of pre-occurring liver diseases, such as hepatitis and cirrhosis. Given its aggressive nature and poor prognosis, the early screening and diagnosis of HCC are crucial. However, due to its plethora of underlying risk factors and pathophysiologies, patient presentation often varies in the early stages, with many patients presenting with few, if any, specific symptoms in the early stages. Conventionally, screening and diagnosis are performed through radiological examination, with diagnosis confirmed by biopsy. Imaging modalities tend to be limited by their requirement of large, expensive equipment; time-consuming operation; and a lack of accurate diagnosis, whereas a biopsy's invasive nature makes it unappealing for repetitive use. Recently, biosensors have gained attention for their potential to detect numerous conditions rapidly, cheaply, accurately, and without complex equipment and training. Through their sensing platforms, they aim to detect various biomarkers, such as nucleic acids, proteins, and even whole cells extracted by a liquid biopsy. Numerous biosensors have been developed that may detect HCC in its early stages. We discuss the recent updates in biosensing technology, highlighting its competitive potential compared to conventional methodology and its prospects as a tool for screening and diagnosis.

Detection of E.coli 23S rRNA by electrocatalytic "off-on" DNA beacon assay with femtomolar sensitivity

Prevention of food spoilage, environmental bio-contamination, and pathogenic infections requires rapid and sensitive bacterial detection systems. Among microbial communities, the bacterial strain of Escherichia coli is most widespread, with pathogenic and non-pathogenic strains being biomarkers of bacterial contamination. Here, we have developed a fM-sensitive, simple, and robust electrocatalytically-amplified assay facilitating specific detection of E.coli 23S ribosomal rRNA, in the total RNA sample, after its site-specific cleavage by RNase H enzyme. Gold screen-printed electrodes (SPE) were electrochemically pre-treated to be productively modified with a methylene-blue (MB) - labelled hairpin DNA probes, which hybridization with the E. coli-specific DNA placed MB in the top region of the DNA duplex. The formed duplex acted as an electrical wire, mediating electron transfer from the gold electrode to the DNA-intercalated MB, and further to ferricyanide in solution, enabling its electrocatalytic reduction otherwise impeded on the hairpin-modified SPEs. The assay facilitated 20 min 1 fM detection of both synthetic E. coli DNA and 23S rRNA isolated from E.coli (equivalent to 15 CFU mL^-1), and can be extended to fM analysis of nucleic acids isolated from any other bacteria.

The Promise of Nanotechnology in Personalized Medicine

Both personalized medicine and nanomedicine are new to medical practice. Nanomedicine is an application of the advances of nanotechnology in medicine and is being integrated into diagnostic and therapeutic tools to manage an array of medical conditions. On the other hand, personalized medicine, which is also referred to as precision medicine, is a novel concept that aims to individualize/customize therapeutic management based on the personal attributes of the patient to overcome blanket treatment that is only efficient in a subset of patients, leaving others with either ineffective treatment or treatment that results in significant toxicity. Novel nanomedicines have been employed in the treatment of several diseases, which can be adapted to each patient-specific case according to their genetic profiles. In this review, we discuss both areas and the intersection between the two emerging scientific domains. The review focuses on the current situation in personalized medicine, the advantages that can be offered by nanomedicine to personalized medicine, and the application of nanoconstructs in the diagnosis of genetic variability that can identify the right drug for the right patient. Finally, we touch upon the challenges in both fields towards the translation of nano-personalized medicine.

Highly sensitive and quantitative biodetection with lipid-polymer hybrid nanoparticles having organic room-temperature phosphorescence

A versatile organic room-temperature phosphorescence (RTP)-based "turn on" biosensor platform has been devised with high sensitivity by combining oxygen-sensitive lipid-polymer hybrid RTP nanoparticles with a signal-amplifying enzymatic oxygen scavenging reaction in aqueous solutions. When integrated with a sandwich-DNA hybridization assay on 96-well plates, our phosphorimetric sensor demonstrates sequence-specific detection of a cell-free cancer biomarker, a TP53 gene fragment, with a sub-picomolar (0.5 p.m.) detection limit. This assay is compatible with detecting cell-free nucleic acids in human urine samples. Simply by re-programming the detection probe, our unique methodology can be adapted to a broad range of biosensor applications for biomarkers of great clinical importance but difficult to detect due to their low abundance in vivo.

Label-free detection of SARS-CoV-2 Spike S1 antigen triggered by electroactive gold nanoparticles on antibody coated fluorine-doped tin oxide (FTO) electrode

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2, also known as 2019-nCov or COVID-19) outbreak has become a huge public health issue due to its rapid transmission making it a global pandemic. Here, we report fabricated fluorine doped tin oxide (FTO) electrodes/gold nanoparticles (AuNPs) complex coupled with in-house developed SARS-CoV-2 spike S1 antibody (SARS-CoV-2 Ab) to measure the response with Cyclic Voltammetry (CV) and Differential Pulse Voltammetry (DPV). The biophysical characterisation of FTO/AuNPs/SARS-CoV-2Ab was done via UV-Visible spectroscopy, Dynamic Light Scattering (DLS), and Fourier Transform Infrared Spectroscopy (FT-IR). The fabricated FTO/AuNPs/SARS-CoV-2Ab immunosensor was optimised for response time, antibody concentration, temperature, and pH. Under optimum conditions, the FTO/AuNPs/Ab based immunosensor displayed high sensitivity with limit of detection (LOD) up to 0.63 fM in standard buffer and 120 fM in spiked saliva samples for detection of SARS-CoV-2 spike S1 antigen (Ag) with negligible cross reactivity Middle East Respiratory Syndrome (MERS) spike protein. The proposed FTO/AuNPs/SARS-CoV-2Ab based biosensor proved to be stable for up to 4 weeks and can be used as an alternative non-invasive diagnostic tool for the rapid, specific and sensitive detection of SARS-CoV-2 Spike Ag traces in clinical samples.

Attachment of Single-Stranded DNA to Certain SERS-Active Gold and Silver Substrates: Selected Practical Tips

Layers formed from single-stranded DNA on nanostructured plasmonic metals can be applied as “working elements” in surface–enhanced Raman scattering (SERS) sensors used to sensitively and accurately identify specific DNA fragments in various biological samples (for example, in samples of blood). Therefore, the proper formation of the desired DNA layers on SERS substrates is of great practical importance, and many research groups are working to improve the process in forming such structures. In this work, we propose two modifications of a standard method used for depositing DNA with an attached linking thiol moiety on certain SERS-active structures; the modifications yield DNA layers that generate a stronger SERS signal. We propose: (i) freezing the sample when forming DNA layers on the nanoparticles, and (ii) when forming DNA layers on SERS-active macroscopic silver substrates, using ω-substituted alkanethiols with very short alkane chains (such as cysteamine or mercaptopropionic acid) to backfill the empty spaces on the metal surface unoccupied by DNA. When 6-mercapto-1-hexanol is used to fill the unoccupied places on a silver surface (as in experiments on standard gold substrates), a quick detachment of chemisorbed DNA from the silver surface is observed. Whereas, using ω-substituted alkanethiols with a shorter alkane chain makes it possible to easily form mixed DNA/backfilling thiol monolayers. Probably, the significantly lower desorption rate of the thiolated DNA induced by alkanethiols with shorter chains is due to the lower stabilization energy in monolayers formed from such compounds.

Emergent Biosensing Technologies Based on Fluorescence Spectroscopy and Surface Plasmon Resonance

The purpose of this work is to provide an exhaustive overview of the emerging biosensor technologies for the detection of analytes of interest for food, environment, security, and health. Over the years, biosensors have acquired increasing importance in a wide range of applications due to synergistic studies of various scientific disciplines, determining their great commercial potential and revealing how nanotechnology and biotechnology can be strictly connected. In the present scenario, biosensors have increased their detection limit and sensitivity unthinkable until a few years ago. The most widely used biosensors are optical-based devices such as surface plasmon resonance (SPR)-based biosensors and fluorescence-based biosensors. Here, we will review them by highlighting how the progress in their design and development could impact our daily life.

Spectroscopic sensing and quantification of AP-endonucleases using fluorescence-enhancement by cis–trans isomerization of cyanine dyes

Apurinic/apyrimidinic (AP) endonucleases are vital DNA repair enzymes, and proposed to be a prognostic biomarker for various types of cancer in humans. Numerous DNA sensors have been developed to evaluate the extent of nuclease activity but their DNA termini are not protected against other nucleases, hampering accurate quantification. Here we developed a new fluorescence enhancement (FE)-based method as an enzyme-specific DNA biosensor with nuclease-protection by three functional units (an AP-site, Cy3 and termini that are protected from exonucleolytic cleavage). A robust FE signal arises from the fluorescent cis–trans isomerization of a cyanine dye (e.g., Cy3) upon the enzyme-triggered structural change from double-stranded (ds)DNA to single-stranded (ss)DNA that carries Cy3. The FE-based assay reveals a linear dependency on sub-nanomolar concentrations as low as 10⁻¹¹ M for the target enzyme and can be also utilized as a sensitive readout of other nuclease activities.

Apurinic/apyrimidinic (AP) endonucleases are vital DNA repair enzymes, and proposed to be a prognostic biomarker for various types of cancer in humans.

Toward Cancer Diagnostics of the Tumor Suppressor p53 by Surface Enhanced Raman Spectroscopy

The tumor suppressor p53 protein plays a crucial role in many biological processes. The presence of abnormal concentrations of wild-type p53, or some of its mutants, can be indicative of a pathological cancer state. p53 represents therefore a valuable biomarker for tumor screening approaches and development of suitable biosensors for its detection deserves a high interest in early diagnostics. Here, we revisit our experimental approaches, combining Surface Enhanced Raman Spectroscopy (SERS) and nanotechnological materials, for ultrasensitive detection of wild-type and mutated p53, in the perspective to develop biosensors to be used in clinical diagnostics. The Raman marker is provided by a small molecule (4-ATP) acting as a bridge between gold nanoparticles (NPs) and a protein biomolecule. The Azurin copper protein and specific antibodies of p53 were used as a capture element for p53 (wild-type and its mutants). The developed approaches allowed us to reach a detection level of p53 down to 10^-17 M in both buffer and serum. The implementation of the method in a biosensor device, together with some possible developments are discussed.

Assessment of Gold Bio-Functionalization for Wide-Interface Biosensing Platforms

The continuous improvement of the technical potential of bioelectronic devices for biosensing applications will provide clinicians with a reliable tool for biomarker quantification down to the single molecule. Eventually, physicians will be able to identify the very moment at which the illness state begins, with a terrific impact on the quality of life along with a reduction of health care expenses. However, in clinical practice, to gather enough information to formulate a diagnosis, multiple biomarkers are normally quantified from the same biological sample simultaneously. Therefore, it is critically important to translate lab-based bioelectronic devices based on electrolyte gated thin-film transistor technology into a cost-effective portable multiplexing array prototype. In this perspective, the assessment of cost-effective manufacturability represents a crucial step, with specific regard to the optimization of the bio-functionalization protocol of the transistor gate module. Hence, we have assessed, using surface plasmon resonance technique, a sustainable and reliable cost-effective process to successfully bio-functionalize a gold surface, suitable as gate electrode for wide-field bioelectronic sensors. The bio-functionalization process herein investigated allows to reduce the biorecognition element concentration to one-tenth, drastically impacting the manufacturing costs while retaining high analytical performance.

Review: immunoassays in DNA damage and instability detection

The review includes information on the current state of knowledge of immunometric methods with emphasis on the possibility of deoxyribonucleic acid (DNA) damage detection. Beginning with basic immunoassay enzyme-linked immunosorbent assay (ELISA), this review describes methods such as tyramide signal amplification (TSA), enhanced polymer one-step staining (EPOS), and time resolved amplified cryptate emission (TRACE) as improvements of ELISA's developed over time to obtain more accurate results. In the second part of the review, surface plasmon resonance (SPR) and quantum dots (QDs) are presented as the newest outlooks in the context of immunoanalysis of biological material and molecular studies. The aim of this review is to briefly present immunoassays with emphasis on DNA damage detection; therefore, the types of methods are listed and described, types of signal indicators, basic definitions such as antigen and antibody are given. Every method is considered with an exemplary application focusing on DNA studies, DNA damage and instability detection.

Surface plasmon resonance: a versatile technique for biosensor applications

Surface plasmon resonance (SPR) is a label-free detection method which has emerged during the last two decades as a suitable and reliable platform in clinical analysis for biomolecular interactions. The technique makes it possible to measure interactions in real-time with high sensitivity and without the need of labels. This review article discusses a wide range of applications in optical-based sensors using either surface plasmon resonance (SPR) or surface plasmon resonance imaging (SPRI). Here we summarize the principles, provide examples, and illustrate the utility of SPR and SPRI through example applications from the biomedical, proteomics, genomics and bioengineering fields. In addition, SPR signal amplification strategies and surface functionalization are covered in the review.

Bioanalytical approaches for the detection of single nucleotide polymorphisms by Surface Plasmon Resonance biosensors

The mapping of specific single nucleotide polymorphisms (SNPs) in patients' genome is a main goal in theranostics, aiming to the development of therapies based on personalized medicine. In this review, Surface Plasmon Resonance (SPR) and Surface Plasmon Resonance imaging (SPRi) biosensors applied to the recognition of SNPs were reviewed, since these technologies are emerging in clinical diagnosis as powerful tools thanks to their analytical features, mainly the real-time and label-free monitoring based on array format for parallel analysis. Since the literature is heterogeneous, a critical classification and a systemic comparison of the analytical performances of published methods were here reviewed on the basis of the analytical strategy and the assay design. In particular, the use of helping agents (i.e. proteins, nanoparticles (NPs), intercalating agents) or artificial DNAs, often coupled to SPR to achieve allele discrimination and/or enhanced sensitivity, were here revised and classified. Finally, the real suitability of SPR biosensors to clinical diagnostics for SNPs detection was addressed by comparing their features and performances with those of other biosensors based on other techniques (e.g. electrochemical biosensors).

Surface plasmon resonance applications in clinical analysis

In the last 20 years, surface plasmon resonance (SPR) and its advancement with imaging (SPRi) emerged as a suitable and reliable platform in clinical analysis for label-free, sensitive, and real-time monitoring of biomolecular interactions. Thus, we report in this review the state of the art of clinical target detection with SPR-based biosensors in complex matrices (e.g., serum, saliva, blood, and urine) as well as in standard solution when innovative approaches or advanced instrumentations were employed for improved detection. The principles of SPR-based biosensors are summarized first, focusing on the physical properties of the transducer, on the assays design, on the immobilization chemistry, and on new trends for implementing system analytical performances (e.g., coupling with nanoparticles (NPs). Then we critically review the detection of analytes of interest in molecular diagnostics, such as hormones (relevant also for anti-doping control) and biomarkers of interest in inflammatory, cancer, and heart failure diseases. Antibody detection is reported in relation to immune disorder diagnostics. Subsequently, nucleic acid targets are considered for revealing genetic diseases (e.g., point mutation and single nucleotides polymorphism, SNPs) as well as new emerging clinical markers (microRNA) and for pathogen detection. Finally, examples of pathogen detection by immunosensing were also analyzed. A parallel comparison with the reference methods was duly made, indicating the progress brought about by SPR technologies in clinical routine analysis.

Surface plasmon resonance sensing of nucleic acids: a review

Biosensors based on surface plasmon resonance (SPR) have become a central tool for the investigation and quantification of biomolecules and their interactions. Nucleic acids (NAs) play a vital role in numerous biological processes and therefore have been one of the major groups of biomolecules targeted by the SPR biosensors. This paper discusses the advances of NA SPR biosensor technology and reviews its applications both in the research of molecular interactions involving NAs (NA-NA, NA-protein, NA-small molecule), as well as for the field of bioanalytics in the areas of food safety, medical diagnosis and environmental monitoring.

Electroanalysis of single-nucleotide polymorphism by hairpin DNA architectures

Genetic analysis of infectious and genetic diseases and cancer diagnostics require the development of efficient tools for fast and reliable analysis of single-nucleotide polymorphism (SNP) in targeted DNA and RNA sequences often responsible for signalling disease onset. Here, we highlight the main trends in the development of electrochemical genosensors for sensitive and selective detection of SNP that are based on hairpin DNA architectures exhibiting better SNP recognition properties compared with linear DNA probes. SNP detection by electrochemical hairpin DNA beacons is discussed, and comparative analysis of the existing SNP sensing strategies based on enzymatic and nanoparticle signal amplification schemes is presented.

Sensitive detection of unlabeled oligonucleotides using a paired surface plasma waves biosensor

Detection of unlabeled oligonucleotides using surface plasmon resonance (SPR) is difficult because of the oligonucleotides' relatively lower molecular weight compared with proteins. In this paper, we describe a method for detecting unlabeled oligonucleotides at low concentration using a paired surface plasma waves biosensor (PSPWB). The biosensor uses a sensor chip with an immobilized probe to detect a target oligonucleotide via sequence-specific hybridization. PSPWB measures the demodulated amplitude of the heterodyne signal in real time. In the meantime, the ratio of the amplitudes between the detected output signal and reference can reduce the excess noise from the laser intensity fluctuation. Also, the common-path propagation of p and s waves cancels the common phase noise induced by temperature variation. Thus, a high signal-to-noise ratio (SNR) of the heterodyne signal is detected. The sequence specificity of oligonucleotide hybridization ensures that the platform is precisely discriminating between target and non-target oligonucleotides. Under optimized experimental conditions, the detected heterodyne signal increases linearly with the logarithm of the concentration of target oligonucleotide over the range 0.5-500 pM. The detection limit is 0.5 pM in this experiment. In addition, the non-target oligonucleotide at concentrations of 10 pM and 10nM generated signals only slightly higher than background, indicating the high selectivity and specificity of this method. Different length of perfectly matched oligonucleotide targets at 10-mer, 15-mer and 20-mer were identified at the concentration of 150 pM.

Detection of DNA hybridisation in a diluted serum matrix by surface plasmon resonance and film bulk acoustic resonators

Nanomolar quantities of single-stranded DNA products ~100 nucleotides long can be detected in diluted 1% serum by surface plasmon resonance (SPR) and film bulk acoustic resonators (FBARs). We have used a novel FBAR sensor in parallel with SPR and obtained promising results with both the acoustic and the optical device. Oligonucleotides and a repellent lipoamide, Lipa-DEA, were allowed to assemble on the sensor chip surfaces for only 15 min by dispensing. Lipa-DEA surrounds the analyte-binding probes on the surface and effectively reduces the non-specific binding of bovine serum albumin and non-complementary strands. In a highly diluted serum matrix, the non-specific binding is, however, a hindrance, and the background response must be reduced. Nanomolar concentrations of short complementary oligos could be detected in buffer, whereas the response was too low to be measured in serum. DNA strands that are approximately 100 base pairs long at concentrations as low as 1-nM could be detected both in buffer and in 1% serum by both SPR and the FBAR resonator.

"Off-on" electrochemical hairpin-DNA-based genosensor for cancer diagnostics

A simple and robust "off-on" signaling genosensor platform with improved selectivity for single-nucleotide polymorphism (SNP) detection based on the electronic DNA hairpin molecular beacons has been developed. The DNA beacons were immobilized onto gold electrodes in their folded states through the alkanethiol linker at the 3'-end, while the 5'-end was labeled with a methylene blue (MB) redox probe. A typical "on-off" change of the electrochemical signal was observed upon hybridization of the 27-33 nucleotide (nt) long hairpin DNA to the target DNA, in agreement with all the hitherto published data. Truncation of the DNA hairpin beacons down to 20 nts provided improved genosensor selectivity for SNP and allowed switching of the electrochemical genosensor response from the on-off to the off-on mode. Switching was consistent with the variation in the mechanism of the electron transfer reaction between the electrode and the MB redox label, for the folded beacon being characteristic of the electrochemistry of adsorbed species, while for the "open" duplex structure being formally controlled by the diffusion of the redox label within the adsorbate layer. The relative current intensities of both processes were governed by the length of the formed DNA duplex, potential scan rate, and apparent diffusion coefficient of the redox species. The off-on genosensor design used for detection of a cancer biomarker TP53 gene sequence favored discrimination between the healthy and SNP-containing DNA sequences, which was particularly pronounced at short hybridization times.

SPR-based single nucleotide mismatch biosensor

The detection and characterization of the hybridization event of 21-base, unlabeled DNA oligonucleotides with a monolayer of complementary DNA immobilized on a gold surface, by electrochemical impedance spectroscopy and surface plasmon resonance (SPR) is presented. A thiol modification on the probe DNA strand allowed for its attachment to the surface via self-assembly. For the hybridization of full match target DNA a detection limit of 20 pM was determined. RNA hybridization was also detectable with the same sensor, with a similar detection limit. The SPR signal generated upon hybridization of the full match was always distinguishable from the single mismatch target DNA oligonucleotides when the mismatch was in the middle or at the proximal end of the target DNA sequence. However, the response of the sensor was identical for the hybridization of the full match and the distal end mismatch. The SPR sensor described is reusable over at least 20 hybridization/regeneration cycles and is insensitive to flow rate (20-800 µL min-1) or temperature (20-60 °C). Based on the SPR response, the surface density of the probe was estimated to be at least 4.3 × 1012 molecules per cm2.

Thiolated pyrrolidinyl peptide nucleic acids for the detection of DNA hybridization using surface plasmon resonance

Thiolated pyrrolidinyl peptide nucleic acids (HS-PNAs) bearing d-prolyl-2-aminocyclopentanecarboxylic acid (ACPC) backbones with different lengths and types of thiol modifiers were synthesized and then characterized by MALDI-TOF mass spectrometry. These HS-PNAs were immobilized on gold-coated glass by self-assembled monolayer (SAM) formation via S atom linkage for the detection of DNA hybridization using surface plasmon resonance (SPR). The amount and the stability of the immobilized HS-PNAs, as well as the effects of spacer and blocking thiol on DNA hybridization efficiency, were determined. SPR results indicated that the hybridization efficiency was enhanced when the distance between the PNA portion and the thiol terminal was increased and/or when blocking thiol was used following the HS-PNA immobilization. The immobilized HS-PNA could discriminate between fully complementary DNA from one or two base mismatched DNA with a relatively high degree of mismatch discrimination (>45%) in PBS buffer at 25 degrees C. The lowest DNA concentration at which reliable discrimination between fully complementary and single mismatched DNA could still occur was at about 0.2 microM, which is equivalent to 10 pmol of DNA. This research demonstrates that using these novel thiolated PNAs in combination with the SPR technique offers a direct, rapid and non-label based method that could potentially be applied for the analysis of genomic or PCR-amplified DNA in the future.

Polyaniline Langmuir-Blodgett film based cholesterol biosensor

Cholesterol oxidase (ChOx) has been covalently linked to Langmuir-Blodgett (LB) monolayers of polyaniline (PANI)-stearic acid (SA) prepared onto indium-tin-oxide (ITO) coated glass plates via glutaraldehyde (Glu) chemistry. These ChOx/Glu/PANI-SA LB film/ITO electrodes have been characterized by FT-IR, cyclic voltammetry, and scanning electron microscopy, respectively. The results of response measurements carried out on these bioelectrodes using linear sweep voltammetry (LSV) reveal linearity from 25 to 400 mg/dL of cholesterol concentration with sensitivity of 88.9 nA mg(-1) dL. The linear regression analysis of bioelectrode reveals standard deviation and correlation coefficient of 0.737 microA and 0.9988, respectively. The low value of the Michaelis-Menten constant of these bioelectrodes obtained as 1.21 mM for the immobilized enzyme indicates increased interaction between ChOx and cholesterol in the PANI-SA LB film.

A hand-held surface plasmon resonance biosensor for the detection of ricin and other biological agents

There is an ongoing need for field-deployable biosensor devices. We have constructed a fully self-contained, hand-held biosensor, based on the surface plasmon resonance technique. The dimensions of the sensor unit are 15 x 8 cm, the weight is 600 g and it is powered by a 9 V battery. We have characterised the responsiveness of the sensor using calibrated sucrose solutions and were able to measure changes as small as 3.3 x 10(-6) refractive index units. To demonstrate functionality of the sensor, we have prepared surfaces with an antibody fragment specific for the biological toxin ricin. We were able to detect ricin at 200 ng/mL in 10 min, which is approximately 2500 times less than the minimum lethal dose. We were also able to verify positive binding within a second 10 min window. This sensor demonstrates important steps required for the development of fully integrated, hand-held sensor devices and will form the basis of a multi-analyte system, to be developed in the near future. It also represents the first completely hand-held SPR device, not requiring external power or a computer connection to operate.

Electrochemical genosensor based on peptide nucleic acid-mediated PCR and asymmetric PCR techniques: Electrostatic interactions with a metal cation

The unique structure of peptide nucleic acids (PNAs), linking the N-(2-aminoethyl)glycine units that create a neutral backbone, and prevent it from acting as a primer for DNA polymerase, has been utilized in an electrochemical biosensor scheme for simple and sensitive detection of hybridization. When the PNA is targeted against a single-nucleotide polymorphism (SNP) or wild-type site on the gene, PNA-mediated polymerase chain reaction (PCR) clamping method effectively blocks the formation of a PCR product. In our report, PNA probe for PCR clamping was targeted against the wild-type site of alcohol dehydrogenase. The electrostatic interactions between the negatively charged DNA and neutral PNA molecules with redox-active metal cation cobalt(III)hexamine ([Co(NH3)6]3+) were monitored using differential pulse voltammetry. The electrostatic binding of [Co(NH3)6]3+ to DNA provided the basis for the discrimination against PNA/PNA, PNA/DNA, and DNA/DNA hybrid molecules. We have optimized the experimental conditions, such as probe concentration, [Co(NH3)6]3+ concentration, accumulation time for [Co(NH3)6]3+, and target concentration. A new pretreatment method has also been employed to allow fast and simple detection of hybridization reaction between the PCR amplicon and the probe on glassy carbon electrode (GCE) surface. This method was based on the application of a high-temperature treatment (95 degrees C, 5 min), followed by a 1-min incubation in the presence of DNA primers. The excess concentration of DNA primers prevented the rehybridization of the denatured strands, while enabling the target gene sequence to bind with the immobilized probe. Additionally, asymmetric PCR was employed to detect the presence of genetically modified organism in standard Roundup Ready soybean samples. The amplicons of asymmetric PCR, which were predominantly single-stranded DNA as a result of unequal primer concentration, hybridized with the DNA probe on the sensor surface efficiently. The attachment of long single-strands on GCE surface caused the accumulation of [Co(NH3)6]3+ and a high current response. Here, we report a versatile method that would allow for simple and rapid analysis of nucleic acids in combination with PNA-mediated PCR and asymmetric PCR techniques by using an electrochemical genosensor.

Portable 24-analyte surface plasmon resonance instruments for rapid, versatile biodetection

Field use of surface plasmon resonance (SPR) biosensors for environmental and defense applications such as detection and identification of biological warfare agents has been hampered by lack of rugged, portable, high-performance instrumentation. To meet this need, we have developed compact multi-analyte SPR instruments based on Texas Instruments' Spreeta sensing chips. The instruments weigh 3 kg and are built into clamshell enclosures measuring 28 cm x 22 cm x 13 cm. Functions are divided between an electronics unit in the base of the box and a fluidics assembly in the lid. Automated valves and pumps implement an injection loop flow system that allows sensors to be exposed to sample, rinsed, and treated with additional reagents (such as secondary antibodies) under computer control. Injected samples flow over the surfaces of eight sensor chips fastened into a temperature-controlled silicone flowcell. Each chip has 3 sensing regions, for a total detection of 24 areas that can be simultaneously monitored by SPR. Coating these areas with appropriate antibodies or other receptors allows a sample to be screened for up to 24 different substances simultaneously. The instruments report refractive index (RI) values every second, with a typical noise level of 1-3 x 10(-6) RI units. The design of the device is described, and performance is illustrated with detection of six distinct analytes ranging from small molecules to whole microbes during the course of a single experiment.

Highly sensitive phage-based biosensor for the detection of beta-galactosidase

Development of real-time sensor based on the target-specific probe that make possible sensitive, rapid and selective detection and monitoring of the particular antigen molecules could be of substantial importance to the many applications. Because of its high specificity to the target molecules, excellent temperature stability, and easy production, bacterial phage might serve as a powerful biorecognition probe in biosensor applications. Here, we report extremely sensitive and specific label-free direct detection of model antigen, beta-galactosidase (beta-gal), based on surface plasmon resonance (SPR) spectroscopy. The beta-gal specific landscape phage 1G40 has been immobilized on the gold surface of SPR SPREETA sensor chip through physical adsorption [V. Nanduri, A.M. Samoylova, V.Petrenko, V. Vodyanoy and A.L.Simonian, Comparison of optical and acoustic wave phage biosensors, 206th Meeting of The Electrochemical Society, Honolulu, Hawaii, October 3-8, (2004)]. Another non-specific to the beta-gal phage, a wild-type phage F8-5, was used in the reference channel. The concentration-dependent binding of beta-gal in both channels were assessed by monitoring the sensor optical response as a function of time under different experimental conditions, and the concentration of beta-gal was computed in differential mode. Concentrations of beta-gal between 10(-12) M and 10(-7) M could be readily detected, with linear part of calibration curve between 10(-9) M and 10(-6) M. When beta-gal was pre-incubated with different concentrations of free 1G40 phage prior to exposure to the biosensor, concentration-dependent inhibition was observed, indicating on biosensor high specificity toward beta-gal. Apart from a flow through mode used to deliver the samples to the surface for the SPR sensor, batch mode sensing was also employed to study the binding of beta-gal to immobilized phage on the SPR sensor surface. Experiments using a flow through mode provided more consistent results in the full dose range and showed higher sensitivity as opposed to the batch mode studies. The mean K(d) and binding valences for the flow through mode studies was 1.3+/-0.001 nM and 1.5+/-0.03, in comparison to 26+/-0.003 nM and 2.4+/-0.01 for the batch mode studies. The average thickness of phage 1G40 adlayer deposited through flow through and batch mode was 3+/-0.002 and 0.66+/-0.001 nm, respectively.

Nucleic acid sensing by regenerable surface-associated isothermal rolling circle amplification

A novel method for regenerating biosensors has been developed in which the highly specific detection of nucleic acid sequences is carried out using molecular padlock probe (MPP) technology and surface-associated rolling circle amplification (RCA). This technique has a low occurrence of false positive results when compared to polymerase chain reaction, and is an isothermal reaction, which is advantageous in systems requiring low power consumption such as remote field sensing applications. Gold-sputtered 96-well polystyrene microplates and a fluorescent label were used to explore the detection limits of the surface-associated RCA technique, specificity for different MPP, conditions for regeneration of the biomolecular sensing surface, and reproducibility of measurements on regenerated surfaces. The technique was used to create highly selective biomolecular surfaces capable of discriminating between DNA oligonucleotides with sequences identical to RNA from infectious salmon anemia (ISA) and infectious hematopoietic necrosis (IHN) virus. As little as 0.6 fmol of circularized MPP was detectable with this fluorimetric assay. The sensing layers could be reused for at least four cycles of amplification using thermal denaturation, with less than 33% decrease in RCA response over time. Because the nucleic acid product of the test is attached to a surface during amplification, the technique is directly applicable to a variety of existing sensing platforms, including acoustic wave and optical devices.