Patterned cell adhesion by self-assembled structures for use with a CMOS cell-based biosensor

A Multidisciplinary Approach toward CMOS Capacitive Sensor Array for Droplet Analysis

This paper introduces an innovative method for the analysis of alcohol-water droplets on a CMOS capacitive sensor, leveraging the controlled thermal behavior of the droplets. Using this sensing method, the capacitive sensor measures the total time of evaporation (ToE), which can be influenced by the droplet volume, temperature, and chemical composition. We explored this sensing method by introducing binary mixtures of water and ethanol or methanol across a range of concentrations (0-100%, with 10% increments). The experimental results indicate that while the capacitive sensor is effective in measuring both the total ToE and dielectric properties, a higher dynamic range and resolution are observed in the former. Additionally, an array of sensing electrodes successfully monitors the droplet-sensor surface interaction. However practical considerations such as the creation of parasitic capacitance due to mismatch, arise from the large sensing area in the proposed capacitive sensors and other similar devices. In this paper, we discuss this non-ideality and propose a solution. Also, this paper showcases the benefits of utilizing a CMOS capacitive sensing method for accurately measuring ToE.

Conductive polymer-based bioelectrochemical assembly for in vitro cytotoxicity evaluation: Renoprotective assessment of Salvia officinalis against carbon tetrachloride induced nephrotoxicity

BACKGROUND

The rise of organic electronics represents one of the most prominent technological developments of the last two decades, with its interface with biological systems highlighting new directions of research. The "soft" nature of conducting polymers renders them unique platforms for cell-based microdevices, allowing their implementation in drug discovery, pharmaceutical effect analysis, environmental pollutant testing etc.

METHODS

Cellular adhesion, proliferation and viability experiments were carried out to verify the biocompatibility of a PEDOT conductive polymer surface. Cyclic voltammetry was employed for estimating the electrocatalytic activity of the renal cell/electrode interface. The nephrotoxicity agent CCl₄ and the medicinal plant Salvia officinalis were used on the proposed assembly. Renal cell viability was also assayed through the MTT assay.

RESULTS

Renal cells were able to adhere and proliferate on the conducting polymer surface. Electrochemical responses of the polymer exhibited good correlation with cell number and CCl₄ concentration. Amelioration of the CCl₄-induced renotoxicity by co-incubation with Salvia officinalis extract was demonstrated by both the MTT assay and the electrode's capacitance.

CONCLUSIONS

A conducting polymer-based bioelectrochemical assembly was established for in vitro mammalian cytotoxicity/cytoprotection assessment, employing renal cell monolayers as the primary transducers for signal generation and biological sensing.

GENERAL SIGNIFICANCE

The knowledge on PEDOT mammalian cell biocompatibility and possible applications was expanded. The proposed interdisciplinary approach connects soft electronics with biology and could provide a useful tool for preliminary crude drug screening and bioactivity studies of natural products or plant extracts in vitro.

Unbiased Clustering of Molecular Dynamics for Spatially Resolved Analysis of Chemically Heterogeneous Surfaces

A technique is described for resolving and interpreting molecular interactions with a chemically heterogeneous surface. Using total internal reflection fluorescence microscopy, dynamic single molecule trajectories were accumulated simultaneously for fluorescently labeled fatty acid (interacting primarily via hydrophobic interactions) and dextran (interacting via hydrogen-bonding interactions) probe molecules at the interface between an aqueous solvent and a photopatterned solid surface with distinct regions of amine-terminated and poly(ethylene glycol) self-assembled monolayers. Using dynamic properties of the probe molecules (adsorption rate, surface diffusion coefficient, residence time), an unsupervised Gaussian mixture model algorithm was used to identify areas of the surface that were chemically related to each other, and the dynamic behaviors of the probe molecules were studied statistically on these distinct regions. The dynamic data were compared to data from homogeneous surfaces of known chemistry to provide a chemical identification of each location on the surface. Spatial maps were also constructed, allowing for spatial visualization of surface chemistry on a hydrophilic substrate. This work enables the direct study of interactions between single-molecule probes and distinct surface chemistries, even in the presence of spatial heterogeneity, without human bias, assumptions about surface structure, or model-dependent analysis.

Cell patterning on photolithographically defined parylene-C: SiO2 substrates

Cell patterning platforms support broad research goals, such as construction of predefined in vitro neuronal networks and the exploration of certain central aspects of cellular physiology. To easily combine cell patterning with Multi-Electrode Arrays (MEAs) and silicon-based ‘lab on a chip’ technologies, a microfabrication-compatible protocol is required. We describe a method that utilizes deposition of the polymer parylene-C on SiO₂ wafers. Photolithography enables accurate and reliable patterning of parylene-C at micron-level resolution. Subsequent activation by immersion in fetal bovine serum (or another specific activation solution) results in a substrate in which cultured cells adhere to, or are repulsed by, parylene or SiO₂ regions respectively. This technique has allowed patterning of a broad range of cell types (including primary murine hippocampal cells, HEK 293 cell line, human neuron-like teratocarcinoma cell line, primary murine cerebellar granule cells, and primary human glioma-derived stem-like cells). Interestingly, however, the platform is not universal; reflecting the importance of cell-specific adhesion molecules. This cell patterning process is cost effective, reliable, and importantly can be incorporated into standard microfabrication (chip manufacturing) protocols, paving the way for integration of microelectronic technology.

Hydrolytically degradable poly(ethylene glycol) hydrogel scaffolds as a cell delivery vehicle: characterization of PC12 cell response

The central nervous system (CNS) has a low intrinsic potential for regeneration following injury and disease, yet neural stem/progenitor cell (NPC) transplants show promise to provide a dynamic therapeutic in this complex tissue environment. Moreover, biomaterial scaffolds may improve the success of NPC-based therapeutics by promoting cell viability and guiding cell response. We hypothesized that a hydrogel scaffold could provide a temporary neurogenic environment that supports cell survival during encapsulation, and degrades completely in a temporally controlled manner to allow progression of dynamic cellular processes such as neurite extension. We utilized PC12 cells as a model cell line with an inducible neuronal phenotype to define key properties of hydrolytically degradable poly(ethylene glycol) hydrogel scaffolds that impact cell viability and differentiation following release from the degraded hydrogel. Adhesive peptide ligands (RGDS, IKVAV, or YIGSR), were required to maintain cell viability during encapsulation; as compared to YIGSR, the RGDS, and IKVAV ligands were associated with a higher percentage of PC12 cells that differentiated to the neuronal phenotype following release from the hydrogel. Moreover, among the hydrogel properties examined (e.g., ligand type, concentration), total polymer density within the hydrogel had the most prominent effect on cell viability, with densities above 15% w/v leading to decreased cell viability likely due to a higher shear modulus. Thus, by identifying key properties of degradable hydrogels that affect cell viability and differentiation following release from the hydrogel, we lay the foundation for application of this system towards future applications of the scaffold as a neural cell delivery vehicle.

Theory, fabrication and applications of microfluidic and nanofluidic biosensors

Biosensors are a broad array of devices that detect the type and amount of a biological species or biomolecule. Several different types of biosensors have been developed that rely on changes to mechanical, chemical or electrical properties of the transduction or sensing element to induce a measurable signal. Often, a biosensor will integrate several functions or unit operations such as sample extraction, manipulation and detection on a single platform. This review begins with an overview of the current state-of-the-art biosensor field. Next, the review delves into a special class of biosensors that rely on microfluidics and nanofluidics by presenting the underlying theory, fabrication and several examples and applications of microfluidic and nanofluidic sensors.

Direct assembling methodologies for high-throughput bioscreening

Over the last few decades, high-throughput (HT) bioscreening, a technique that allows rapid screening of biochemical compound libraries against biological targets, has been widely used in drug discovery, stem cell research, development of new biomaterials, and genomics research. To achieve these ambitions, scaffold-free (or direct) assembly of biological entities of interest has become critical. Appropriate assembling methodologies are required to build an efficient HT bioscreening platform. The development of contact and non-contact assembling systems as a practical solution has been driven by a variety of essential attributes of the bioscreening system, such as miniaturization, high throughput, and high precision. The present article reviews recent progress on these assembling technologies utilized for the construction of HT bioscreening platforms.

Controlled adhesion and growth of long term glial and neuronal cultures on Parylene-C

This paper explores the long term development of networks of glia and neurons on patterns of Parylene-C on a SiO₂ substrate. We harvested glia and neurons from the Sprague-Dawley (P1–P7) rat hippocampus and utilized an established cell patterning technique in order to investigate cellular migration, over the course of 3 weeks. This work demonstrates that uncontrolled glial mitosis gradually disrupts cellular patterns that are established early during culture. This effect is not attributed to a loss of protein from the Parylene-C surface, as nitrogen levels on the substrate remain stable over 3 weeks. The inclusion of the anti-mitotic cytarabine (Ara-C) in the culture medium moderates glial division and thus, adequately preserves initial glial and neuronal conformity to underlying patterns. Neuronal apoptosis, often associated with the use of Ara-C, is mitigated by the addition of brain derived neurotrophic factor (BDNF). We believe that with the right combination of glial inhibitors and neuronal promoters, the Parylene-C based cell patterning method can generate structured, active neural networks that can be sustained and investigated over extended periods of time. To our knowledge this is the first report on the concurrent application of Ara-C and BDNF on patterned cell cultures.

Conductive AFM patterning on oligo(ethylene glycol)-terminated alkyl monolayers on silicon substrates: proposed mechanism and fabrication of avidin patterns

Micro- and nanopatterns of biomolecules on inert, ultrathin platforms on nonoxidized silicon are ideal interfaces between silicon-based microelectronics and biological systems. We report here the local oxidation nanolithography with conductive atomic force microscopy (cAFM) on highly protein-resistant, oligo(ethylene glycol) (OEG)-terminated alkyl monolayers on nonoxidized silicon substrates. We propose a mechanism for this process, suggesting that it is possible to oxidize only the top ethylene glycol units to generate carboxylic acid and aldehyde groups on the film surface. We show that avidin molecules can be attached selectively to the oxidized pattern and the density can be varied by altering the bias voltage during cAFM patterning. Biotinylated molecules and nanoparticles are selectively immobilized on the resultant avidin patterns. Since one of the most established methods for immobilization of biomolecules is based on avidin-biotin binding and a wide variety of biotinylated biomolecules are available, this approach represents a versatile means for prototyping any nanostructures presenting these biomolecules on silicon substrates.

Photopatterning of cell-adhesive-modified poly(ethyleneimine) for guided neuronal growth

We describe photopatterning technique that employs the photodegradation of cell-adhesive-modified poly(ethyleneimine) (m-PEI) to fabricate precise micropatterns on the indium tin oxide (ITO) substrate for guided neuronal growth. The photodegradation of m-PEI coated on hydroxyl group-terminated ITO substrate created micropatterns over a large area through deep UV irradiation. The photopatterned m-PEI layer can effectively guide neurite outgrowth and control neurite extensions from individual neurons.

Cell patterning using molecular vapor deposition of self-assembled monolayers and lift-off technique

This paper reports a precise, live cell-patterning method by means of patterning a silicon or glass substrate with alternating cytophilic and cytophobic self-assembled monolayers (SAMs) deposited via molecular vapor deposition. Specifically, a stack of hydrophobic heptadecafluoro-1,1,2,2-tetrahydrodecyltrichlorosilane SAMs and a silicon oxide adhesion layer were patterned on the substrate surface, and a hydrophilic SAM derived from 3-trimethoxysilyl propyldiethylenetriamine was coated on the remaining non-treated areas on the substrate surface to promote cell growth. The primary characteristics of the reported method include: (i) single-cell resolution; (ii) easy alignment of the patterns with the pre-existing patterns on the substrate; (iii) easy formation of nanoscale patterns (depending on the exposure equipment); (iv) long shelf life of the substrate pattern prior to cell culturing; (v) compatibility with conventional, inverted, optical microscopes for simple visualization of patterns formed on a glass wafer; and (vi) the ability to support patterned cell (osteoblast) networks for at least 2 weeks. Here, we describe the deposition technique and the characterization of the deposited layers, as well as the application of this method in the fabrication of multielectrode arrays supporting patterned neuronal networks.

Guided growth of neurons and glia using microfabricated patterns of parylene-C on a SiO2 background

This paper describes a simple technique for the patterning of glia and neurons. The integration of neuronal patterning to Multi-Electrode Arrays (MEAs), planar patch clamp and silicon based 'lab on a chip' technologies necessitates the development of a microfabrication-compatible method, which will be reliable and easy to implement. In this study a highly consistent, straightforward and cost effective cell patterning scheme has been developed. It is based on two common ingredients: the polymer parylene-C and horse serum. Parylene-C is deposited and photo-lithographically patterned on silicon oxide (SiO(2)) surfaces. Subsequently, the patterns are activated via immersion in horse serum. Compared to non-activated controls, cells on the treated samples exhibited a significantly higher conformity to underlying parylene stripes. The immersion time of the patterns was reduced from 24 to 3h without compromising the technique. X-ray photoelectron spectroscopy (XPS) analysis of parylene and SiO(2) surfaces before and after immersion in horse serum and gel based eluant analysis suggests that the quantity and conformation of proteins on the parylene and SiO(2) substrates might be responsible for inducing glial and neuronal patterning.

Photolithographic patterning of organosilane monolayer for generating large area two-dimensional B lymphocyte arrays

High-density live cell array serves as a valuable tool for the development of high-throughput immunophenotyping systems and cell-based biosensors. In this paper, we have, for the first time, demonstrated a simple fabrication process to form the hexamethyldisilazane (HMDS) and poly(ethylene glycol) (PEG) binary molecular surface which can be used to effectively form high fidelity cell arrays. The HMDS self-assembled monolayer (SAM) on glass substrates was photolithographically patterned and its ability to physically adsorb proteins was characterized by contact angle measurement and fluorescence microscopy respectively. Passivation of the non-HMDS coated background by PEG was verified to have no impact on the pre-patterned HMDS and greatly inhibited the non-specific protein binding. Using the biotin-streptavidin complexation as an intermediate, uniform orientation and high bioactivity were achieved for the immobilized B lymphocyte specific anti-CD19 antibodies and therefore ensured the formation of high resolution B lymphocyte arrays. The cell-ligand interaction specificity was investigated and the anti-CD19 decorated micropatterns presented a much higher cell-capturing rate (88%) than those modified by non-specific ligands (15% for anti-CD5 and 7% for streptavidin). The approach was verified to be biocompatible and the properties of the antibody-modified surface were maintained after 12 h cell culture. The HMDS monolayer formation and patterning processes, and the universal HMDS/biotin-BSA/streptavidin template, provide a very simple and convenient process to generate high resolution micropatterns of cell-adhesive ligands and are extendable to form arrays of other types of cells as well.

Microcavity array (MCA)-based biosensor chip for functional drug screening of 3D tissue models

Multicellular tumour spheroids that mimic a native cellular environment are widely used as model systems for drug testing. To study drug effects on three-dimensional cultures in real-time we designed and fabricated a novel type of sensor chip for fast, non-destructive impedance spectroscopy and extracellular recording. Precultured spheroids are trapped between four gold electrodes. Fifteen individual 100microm deep square microcavities with sizes from 200 to 400microm allow an optimised positioning during the measurement. Although apoptosis was induced in human melanoma spheroids by Camptothecin (CTT), treated cultures did not show disintegration but displayed increased impedance magnitudes compared to controls after 8h resulting from an altered morphology of the outer cells. Contractions in cardiomyocyte spheroids were monitored when the innovative chip was used for recording of extracellular potentials. The silicon-based electrode array is used as an acute test system for the monitoring of any kind of 3D cell cultures. Since no adherence of cells or labelling is necessary the multifunctional sensor chip provides a basis for improved drug development by high content screenings with reduced costs and assay times. Additional improvements for parallel testing of different substances on one chip are presented.

Human fibroblast and human bone marrow cell response to lithographically nanopatterned adhesive domains on protein rejecting substrates

The separate influence of topographical and chemical cues on cell attachment and spreading are well documented; however, that of duel-cue substrates is less so. In this study graft copolymers that sterically stabilize biological surfaces were employed alongside nanotopographical features fabricated by colloidal lithography. This resulted in the production of a range of substrates whereby the effect of chemistry and or topography on both on human fibroblast and bone marrow cell adhesion and spreading could be observed. The current studies indicate an enhancement of cell response as a consequence of modifications in material topography, whereas the current selected chemical cues inhibited cell function. Critically, in combination, topography modulated the effects of chemical environment.