Successively amplified electrochemical immunoassay based on biocatalytic deposition of silver nanoparticles and silver enhancement

Target-mediated silver deposition-based electrochemical biosensor for highly sensitive detection of human chorionic gonadotropin

As a glycoprotein hormone, human chorionic gonadotropin (hCG) is an established marker for pregnancy test. On the basis of the target-mediated silver deposition (TSD), in this work, we report the development of an amplification-free electrochemical biosensor for the highly sensitive detection of hCG. The detection of hCG involves the use of the affinity peptide-modified electrode for hCG capture (the CGGSSPPLRINRHILTR peptide containing the hCG-binding domain of the PPLRINRHILTR sequence is used as the affinity peptide), the oxidation of the diol sites of the glycan chains on hCG hormones into aldehyde groups by NaIO4, and the deposition of silver nanoparticles (AgNPs) for the solid-state voltammetric stripping analysis. Due to the deposition of multiple AgNPs while the solid-state Ag/AgCl voltammetric process has a high signal-to-noise ratio, the TSD-based electrochemical biosensor can be applied to the highly sensitive detection of hCG without the need for signal amplification. Under optimal conditions, the stripping current increased linearly with an increasing hCG concentration over the range from 1.0 to 25 mIU/mL, with a detection limit of 0.45 mIU/mL. Owing to the high specificity of the hCG-binding peptide PPLRINRHILTR, this electrochemical hCG biosensor exhibits high selectivity. The results of the quantitative assay of hCG in urine samples at the concentrations of 25, 10, and 1.0 mIU/mL are desirable, indicating the good anti-interference capability. As the TSD-based electrochemical biosensor allows the amplification-free detection of low-abundance hCG, it is easy to use and cost-effective, showing great promise in point-of-care assay of hCG for pregnancy test.

Progress in Electrochemical Immunosensors with Alkaline Phosphatase as the Signal Label

Electrochemical immunosensors have shown great potential in clinical diagnosis, food safety, environmental protection, and other fields. The feasible and innovative combination of enzyme catalysis and other signal-amplified elements has yielded exciting progress in the development of electrochemical immunosensors. Alkaline phosphatase (ALP) is one of the most popularly used enzyme reporters in bioassays. It has been widely utilized to design electrochemical immunosensors owing to its significant advantages (e.g., high catalytic activity, high turnover number, and excellent substrate specificity). In this work, we summarized the achievements of electrochemical immunosensors with ALP as the signal reporter. We mainly focused on detection principles and signal amplification strategies and briefly discussed the challenges regarding how to further improve the performance of ALP-based immunoassays.

Triangular Silver Nanoplates as a Bioanalytical Tool: Potential COVID-19 Detection

Nanotechnology offers new possibilities in molecular diagnostics, with nanoparticles gaining attention as biosensor upgrades. This study evaluates gold-coated silver nanoplates coated with PEG for enhanced protection, aiming to detect Spike protein with higher sensitivity, and emphasizes the importance of considering complex environments and appropriate controls for specific binding and accurate analysis. The sensitivity of antibody-coated PEGAuTSNPs as tools for immunoassays is demonstrated through fibronectin (Fn)- anti-fibronectin binding within an isolated extracellular matrix as a complex and native environment of Fn. Moreover, the optimal functionalization volume of Spike protein was determined (4 µg/mL of PEGAuTSNP). Anti-Spike was added to confirm binding, while the TJP1 protein was used as a negative control. The same experiment was used in the presence of horse serum to simulate a complex environment. According to Localized Surface Plasmon Resonance analysis and Dynamic Light Scattering size measurements, anti-Spike exhibited a stronger affinity for the nanoplates, causing TJP1 to be replaced by the antibody on the nanoplates' surface. Future research will involve exploring alternative complex environments, filtering larger molecules, and the optimization of immunoassay performance.

Simple and fast Ag deposition method using a redox enzyme label and quinone substrate for the sensitive electrochemical detection of thyroid-stimulating hormone

Enzyme-induced seedless Ag deposition is useful for selective Ag deposition and subsequent electrochemical Ag oxidation; however, a washing step is required after the deposition and before the electrochemical oxidation as the enzyme substrate can be oxidized during the electrochemical oxidation. Here, we report a fast Ag deposition method using a redox enzyme and quinone substrate that does not require a washing step. We found that the quinone substrate is reduced by a redox enzyme label, which is later oxidized to its original form via the reduction of Ag⁺ to Ag. Moreover, the quinone substrate is not electrochemically oxidized during the electrochemical Ag oxidation. We selected one diaphorase and 1,4-naphthoquinone from among seven redox enzymes (four diaphorases and three glucose-oxidizing enzymes) and six quinones, respectively. We applied this Ag deposition method for the detection of thyroid-stimulating hormone (TSH) over a dynamic range from 100 fg/mL to 100 ng/mL and found that TSH could be detected at concentrations as low as approximately 100 fg/mL in artificial serum. Therefore, the Ag deposition strategy developed in this study exhibits promising potential for ultrasensitive clinical applications.

The functionalization of gold nanoparticles as a novel platform for the highly efficient electrochemical detection of silver ions

A novel platform was constructed by the functionalization of gold nanoparticles for the highly efficient electrochemical detection of silver ions.

Biosensors for Detecting Lymphocytes and Immunoglobulins

Lymphocytes (B, T and natural killer cells) and immunoglobulins are essential for the adaptive immune response against external pathogens. Flow cytometry and enzyme-linked immunosorbent (ELISA) kits are the gold standards to detect immunoglobulins, B cells and T cells, whereas the impedance measurement is the most used technique for natural killer cells. For point-of-care, fast and low-cost devices, biosensors could be suitable for the reliable, stable and reproducible detection of immunoglobulins and lymphocytes. In the literature, such biosensors are commonly fabricated using antibodies, aptamers, proteins and nanomaterials, whereas electrochemical, optical and piezoelectric techniques are used for detection. This review describes how these measurement techniques and transducers can be used to fabricate biosensors for detecting lymphocytes and the total content of immunoglobulins. The various methods and configurations are reported, along with the advantages and current limitations.

Ultrasensitive Detection of Parathyroid Hormone through Fast Silver Deposition Induced by Enzymatic Nitroso Reduction and Redox Cycling

Enzymatically induced silver deposition and subsequent electrochemical oxidation have been widely used in electrochemical biosensors. However, this method is ineffective for producing highly enhanced silver deposition for use in ultrasensitive detection. Herein, we report a fast silver deposition method that simultaneously uses three signal amplification processes: (i) enzymatic amplification, (ii) chemical-chemical (CC) redox cycling, and (iii) chemical-enzymatic (CN) redox cycling. DT-diaphorase (DT-D) is used for enzymatic amplification to convert a nitroso compound, a species incapable of directly reducing Ag⁺ to an amine compound, which can directly reduce Ag⁺. NADH acts as a reducing agent for the indirect reduction of Ag⁺ via the two redox cycling processes. 4-Nitroso-1-naphthol is converted to 4-amino-1-naphthol (NH₂-N) in the presence of DT-D. NH₂-N initiates two redox cycling processes: NH₂-N, along with Ag⁺ and NADH, are involved in the CC redox cycling, whereas NH₂-N, along with Ag⁺, DT-D, and NADH, are involved in the CN redox cycling. Finally, the deposited silver is electrochemically oxidized to produce a signal. When this triple signal amplification strategy for fast silver deposition is applied to an electrochemical immunosensor for detecting parathyroid hormone (PTH), a detection limit as low as ∼100 fg/mL is obtained. The concentrations of PTH in clinical serum determined using the developed immunosensor are found to agree with those measured using a commercial instrument. Thus, the use of this strategy for fast silver deposition is highly promising for ultrasensitive electrochemical detection and biosensing applications.

In situ enzymatic generation of gold for ultrasensitive amperometric sandwich immunoassay of procalcitonin

Procalcitonin (PCT) is an important indicator for bacterial inflammatory diseases, and its sensitive, accurate and rapid detection has important clinical value. On the basis of sandwich immunoassay, glucose oxidase-catalyzed gold deposition and in-situ microliter-droplet anodic stripping voltammetry (ASV) of the enzyme-generated gold directly on the immunoelectrode, the ultrasensitive electrochemical detection of PCT is achieved. A new method of the chemical dissolution of gold by an appropriately diluted aqua regia and the simultaneous cathodic preconcentration of gold on the immunoelectrode is suggested, which gives the better performance for the ASV analysis of gold than the reported one. Under optimized conditions, the ASV peak current is linear with the common logarithm of PCT concentration from 0.05 fg mL^-1 to 500 ng mL^-1, with a limit of detection (LOD, S/N = 3) as low as 0.04 fg mL^-1. Our method has also been used for detection of PCT in serum samples with satisfactory results.

Impedimetric detection of bacteria by using a microfluidic chip and silver nanoparticle based signal enhancement

The authors describe a method that can significantly improve the performance of impedimetric detection of bacteria. A multifunctional microfluidic chip was designed consisting of interdigitated microelectrodes and a micro-mixing zone with a Tesla structure. This maximizes the coating of bacterial surfaces with nanoparticles and results in improved impedimetric detection. The method was applied to the detection of Escherichia coli O157:H7 (E. coli). Silver enhancement was accomplished by coating E.coli with the cationic polymer diallyldimethylammonium chloride (PDDA) to form positively charged E. coli/PDDA complexes. Then, gold nanoparticles (AuNPs) were added, and the resulting E. coli/PDDA/AuNPs complexes were collected at interdigitated electrodes via positive dielectrophoresis (pDEP). A silver adduct was then formed on the E. coli/PDDA/AuNP complexes by using silver enhancement solutions and by using the AuNPs as catalysts. The combination of pDEP based capture and of using silver adducts reduces impedance by increasing the conductivity of the solution and the double layer capacitance around the microelectrodes. Impedance decreases linearly in the 2 × 10³-2 × 10⁵ cfu·mL^-1 E. coli concentration range, with a 500 cfu·mL^-1 detection limit. Egg shell wash samples and tap water spiked with E. coli were successfully used for validation, and this demonstrates the practical application of this method. Graphical abstract Schematic representation of the AuNP@Ag enhancement method integrated with multifunctional microfluidic chip platform for impedimetric quantitation of bacteria. The method significantly improves the performance of impedimetric detection of bacteria.

An electrochemical immunosensor comprising thionin/silver nanoparticles decorated KIT-6 for ultrasensitive detection of squamous cell carcinoma antigen

An ultrasensitive electrochemical immunosensor is designed and constructed for the quantitative detection of squamous cell carcinoma antigens (SCCAs).

Iodine-Mediated Etching of Gold Nanorods for Plasmonic ELISA Based on Colorimetric Detection of Alkaline Phosphatase

Here, we propose a plasmonic enzyme-linked immunosorbent assay (ELISA) based on highly sensitive colorimetric detection of alkaline phosphatase (ALP), which is achieved by iodine-mediated etching of gold nanorods (AuNRs). Once the sandwich-type immunocomplex is formed, the ALP bound on the polystyrene microwells will hydrolyze ascorbic acid 2-phosphate into ascorbic acid. Subsequently, iodate is reduced to iodine, a moderate oxidant, which etches AuNRs from rod to sphere in shape. The shape change of AuNRs leads to a blue-shift of longitudinal localized surface plasmon resonance. As a result, the solution of AuNRs changes from blue to red. Benefiting from the highly sensitive detection of ALP, the proposed plasmonic ELISA has achieved an ultralow detection limit (100 pg/mL) for human immunoglobulin G (IgG). Importantly, the visual detection limit (3.0 ng/mL) allows the rapid differential diagnosis with the naked eye. The further detection of human IgG in fetal bovine serum indicates its applicability to the determination of low abundance protein in complex biological samples.

A dual amplification strategy for ultrasensitive electrochemiluminescence immunoassay based on a Pt nanoparticles dotted graphene–carbon nanotubes composite and carbon dots functionalized mesoporous Pt/Fe

A facile and sensitive ECL immunosensor has been designed using Pt/Gr–CNTs as a platform and Pt/Fe@CDs as bionanolabels.

Aptamer-aided target capturing with biocatalytic metal deposition: an electrochemical platform for sensitive detection of cancer cells

A novel aptamer biosensor for cancer cell assay has been reported on the basis of ultrasensitive electrochemical detection. Cancer cell capturing is first accomplished via aptamer-aided recognition, and the cell-aptamer binding events then mediate an alkaline phosphatase-catalyzed silver deposition reaction which can be probed by electrochemical detection. Following biocatalytic silver deposition, an efficient amplification approach for sensitive electrochemical measurements is demonstrated, for cell detection with high sensitivity. Ramos cell are used as a model case, a typical biomarker of the acute blood cell cancer, Burkitt's lymphoma. The results reveal that the developed technique displays desirable selectivity in Ramos cell discrimination, and linear response range from 10 to 10(6) cells with a detection limit as low as 10 cells. Due to the simple procedures, label-free and electrochemistry based detection format, this technique is simple and cost-effective, and exhibits excellent compatibility with miniaturization technologies. The electrochemical cell detection strategy may create an intrinsically specific and sensitive platform for cancer cell assay and associated studies.

An ultrasensitive chemiluminescence biosensor for carcinoembryonic antigen based on autocatalytic enlargement of immunogold nanoprobes

A sensitive flow injection chemiluminescence assay for carcinoembryonic antigen (CEA) detection based on signal amplification with gold nanoparticles (NPs) is reported in the present work. The sandwich system of CEA/anti-CEA/goat-anti-mouse IgG functionalized Au nanoparticles was used as the sensing platform. In order to improve detection sensitivity, a further gold enlargement step was developed based on the autocatalytic Au deposition of gold nanoprobes via the reduction of AuCl₄⁻ to Au⁰ on their surface in the presence of NH₂OH·HCl. AuCl₄⁻, which is a soluble product of gold nanoprobes, served as an analyte in the CL reaction for the indirect measurement of CEA. Under optimized conditions, the CL intensity of the system was linearly related to the logarithm of CEA concentration in the range of 100 pg·mL⁻¹ to 1,000 ng·mL⁻¹, with a detection limit of 20 pg·mL⁻¹.

A lab-on-a-chip for rapid blood separation and quantification of hematocrit and serum analytes

In this work, a new lab-on-a-chip for rapid analysis of low volume blood samples was designed, fabricated and demonstrated for integration of serum separation, hematocrit evaluation, and protein quantitation. Blood separation was achieved using microchannel flow-based separation. A novel method for evaluating hematocrit from microfluidic flow-separated blood samples was developed using gray scale analysis of a point-and-shoot digital photograph of separated blood in a micochannel. Protein quantitation was subsequently performed in a high surface area-to-volume ratio microfluidic chemiluminescent immunoassay using cell depleted serum produced by microfluidic flow-based separation of whole blood samples. All three steps were achieved in a single microchannel with separation of blood samples and hematocrit evaluation in less than 1 min, and protein quantitation in 5 min.

Aptamer-based PDMS-gold nanoparticle composite as a platform for visual detection of biomolecules with silver enhancement

A sensitive colorimetric detection for biomolecules based on aptamer was described. Poly(dimethylsiloxane) (PDMS)-gold nanoparticles (AuNPs) composite film was used as a platform for immobilizing anti-target aptamer. PDMS-AuNPs composite film only covered with aptamer showed high inhibiting ability towards silver reduction, after target molecules were conjugated on the modified surface, the catalytic efficiency of AuNPs for silver reduction was increased. In this system, the darkness density of silver enhancement was applied for target quantitative measurement. Lysozyme and adenosine 5'-triphosphate (ATP) were tested as the models, quantitative measurements with imaging software or semiquantitative measurements with naked eyes were carried out in the range of 1×10(-2)-1 μg/mL and 1×10(-4)-1×10(3) μg/mL, the volume of reagent using in each assay is 15 μL or less. We speculated that aptamer-target conjugates' inhibition ability for AuNPs' catalytic efficiency toward silver reduction might come from charge and spatial effects. This study can offer a completely novel and relatively general approach for colorimetrical aptamer sensors with good analytical properties and potential applications. The sensor could be coupled with digital transmission of images for remote monitoring system in diagnosis, food control, and environmental analysis.

The use of nanoparticles in electroanalysis: an updated review

The use of nanoparticles in electroanalysis is an area of research which is continually expanding. A wealth of research is available discussing the synthesis, characterization and application of nanoparticles. The unique properties of nanoparticulate materials (e.g. enhanced mass transport, high surface area, improved signal-to-noise ratio) can often be advantageous in electroanalytical techniques. The aim of this paper is to provide an updated overview of the work in this field. In this review we have concentrated on the advances with regards to silver, gold, platinum, palladium, ruthenium, copper and nickel. The synthesis, characterization and practical application of these materials are discussed. We have also identified the conditions under which each metal is likely to be stable, which is likely to be a useful tool for those practising in the field. Furthermore, we have provided a theoretical overview of advances in the theoretical modelling and simulation of nanoparticle behaviour.

Nanomaterial-assisted signal enhancement of hybridization for DNA biosensors: a review

Detection of DNA sequences has received broad attention due to its potential applications in a variety of fields. As sensitivity of DNA biosensors is determined by signal variation of hybridization events, the signal enhancement is of great significance for improving the sensitivity in DNA detection, which still remains a great challenge. Nanomaterials, which possess some unique chemical and physical properties caused by nanoscale effects, provide a new opportunity for developing novel nanomaterial-based signal-enhancers for DNA biosensors. In this review, recent progress concerning this field, including some newly-developed signal enhancement approaches using quantum-dots, carbon nanotubes and their composites reported by our group and other researchers are comprehensively summarized. Reports on signal enhancement of DNA biosensors by non-nanomaterials, such as enzymes and polymer reagents, are also reviewed for comparison. Furthermore, the prospects for developing DNA biosensors using nanomaterials as signal-enhancers in future are also indicated.

Prostate Specific Antigen Detection Using Microgapped Electrode Array Immunosensor with Enzymatic Silver Deposition

Background: Analysis of trace proteins plays an essential role in the fields of biomedical research and clinical diagnosis. Development of methods for the detection of proteins at very low concentrations has historically been a challenge in immunochemistry. We have developed an electrical immunosensor for the detection of prostate specific antigen (PSA).

Methods: The electrical immunosensor uses a microgapped interdigitated electrode array (MGIDEA) based on enzymatic silver deposition reaction. The deposition of silver was dispersed over the microgaps and allows the microgapped interdigitated electrodes to be electrically connected, resulting in an increase in electrical conductance of MGIDEA that is used to quantify the analyte concentration. We used this electrical immunosensor to measure PSA in human serum samples from patients with prostate diseases.

Results: This electrical immunosensor exhibited a linear response with PSA concentrations over a 6-decade range from 1.0 pg/L to 1.0 μg/L, with detection limit of 0.9 pg/L. PSA concentrations using this immunosensor agreed within 10% of those obtained using a commercial chemiluminescent immunoassay.

Conclusions: The MGIDEA method has characteristics (analyte specific, low background, low limit of detection) that provide potential for molecular detection in various biomedical areas.