Label-free and homogeneous DNA hybridization detection using gold nanoparticles-based chemiluiminescence system

Colorimetric oligonucleotide-based sensor for ultra-low Hg2+ in contaminated environmental medium: Convenience, sensitivity and mechanism

A colorimetric sensor for detection of Hg²⁺ is developed via graphene oxide/gold nanoparticles (GO/AuNPs) nanocomposite as peroxidase mimic. In the absence of Hg²⁺, the adsorption of ss-DNA on GO/AuNPs resulted in the decrease of peroxidase-like activity of GO/AuNPs, which catalyzed the oxidation of 3, 3, 5, 5-tetramethylbenzidine (TMB) to be very light blue. In the presence of Hg²⁺, the oligonucleotides of T-Hg²⁺-T conformation formed by thymine-Hg(II)-thymine interaction could not be adsorbed or bonded on GO/AuNPs, and the GO/AuNPs resumed their original high activity of peroxidase mimic and catalyzed the oxidation of TMB into distinct blue product. Under optimized conditions, the absorbance value at the wavelength of 655 nm (A₆₅₅) was linearly related with the concentration of Hg²⁺ in the range between 5.2 × 10^-9 M and 1.2 × 10^-7 M with a detection limit of 3.8 × 10^-10 M. By visual observation with the naked eye, Hg²⁺ as low as 3.3 × 10^-7 M could cause color change in solution. The specific T-Hg²⁺-T binding made it easy to selectively detect Hg²⁺. The results show that the colorimetric assay offers great potential for the detection of Hg²⁺ in real samples.

Integration of 3D Hydrodynamic Focused Microreactor with Microfluidic Chemiluminescence Sensing for Online Synthesis and Catalytical Characterization of Gold Nanoparticles

Chemiluminescence assays have shown great advantages compared with other optical techniques. Gold nanoparticles have drawn much attention in chemiluminescence analysis systems as an enzyme-free catalyst. The catalytic activity of gold nanoparticles for chemiluminescence sensing depends on size, shape and the surface charge property, which is hard to characterize in batches. As there is no positive or negative correlation between chemiluminescence signals and sizes of gold nanoparticles, the best way to get optimal gold nanoparticles is to control the reaction conditions via online chemiluminescence sensing systems. Therefore, a new method was developed for online synthesis of gold nanoparticles with a three-dimension hydrodynamic focusing microreactor, directly coupled with a microfluidic chemiluminescence sensing chip, which was coupled to a charge-coupled device camera for direct catalytical characterization of gold nanoparticles. All operations were performed in an automatic way with a program controlled by Matlab. Gold nanoparticles were synthesized through a single-phase reaction using glucose as a reducing agent and stabilizer at room temperature. The property of gold nanoparticles was easily controlled with the three-dimension microreactor during synthesis. The catalyst property of synthesized gold nanoparticles was characterized in a luminol-NaOCl chemiluminescence system. After optimizing parameters of synthesis, the chemiluminescence signal was enhanced to a factor of 171. The gold nanoparticles synthesized under optimal conditions for the luminol-NaOCl system were stable for at least one month. To further investigate the catalytic activity of synthesized gold nanoparticles in various situations, two methods were used to change the property of gold nanoparticles. After adding a certain amount of salt (NaCl), gold nanoparticles aggregated with a changed surface charge property and the catalytic activity was greatly enhanced. Glutathione was used as an example of molecules with thiol groups which interact with gold nanoparticles and reduce the catalytic activity. The chemiluminescence intensity was reduced by 98.9%. Therefore, we could show that using a microreactor for gold nanoparticles synthesis and direct coupling with microfluidic chemiluminescence sensing offers a promising monitoring method to find the best synthesis condition of gold nanoparticles for catalytic activity.

Nanomaterial-enhanced chemiluminescence reactions and their applications

Chemiluminescence (CL) analysis is a trace analytical method that possesses advantages including high sensitivity, wide linear range, easy operation, and simple instruments. With the development of nanotechnology, many nanomaterial (NM)-enhanced CL systems have been established in recent years and applied for the CL detection of metal ions, anions, small molecules, tumor markers, sequence-specific DNA, and RNA. This review summarizes the research progress of the nanomaterial-enhanced CL systems the past five years. These CL reactions include luminol, peroxyoxalate, lucigenin, ultraweak CL reactions, and so on. The CL mechanisms of the nanomaterial-enhanced CL systems are discussed in the first section. Nanomaterials take part in the CL reactions as the catalyst, CL emitter, energy acceptor, and reductant. Their applications are summarized in the second section. Finally, the challenges and opportunities are discussed.

Colorimetric determination of carbendazim based on the specific recognition of aptamer and the poly-diallyldimethylammonium chloride aggregation of gold nanoparticles

This paper proposes the idea of establishing carbendazim (CBZ) colorimetric determination in spiked water samples by specific aptamers of unlabeled carbendazim (CBZ), gold nanoparticles (AuNPs) and cationic polymer poly-diallyldimethylammonium chloride (PDDA). In the absence of CBZ, the CBZ aptamer will react with the cationic polymer PDDA by electrostatic interaction to form a complex structure. Therefore, the gold nanoparticles will remain dispersed due to the lack of PDDA. However, when CBZ is added into the sensory system, the CBZ-specific aptamer can selectively capture CBZ to form a stable complex structure. Due to the consumption of the aptamer, PDDA is unable to interact with the aptamer and begins to induce aggregation of AuNPs, thereby causing the color of the solution to change from red to blue. Colorimetric determination of CBZ based on the specific recognition of aptamer and the PDDA-induced aggregation of AuNPs has a detection limit of 2.2 nM, a linear range (R = 0.9960) from 2.2 to 500 nM. The method has good sensitivity and specificity, and the average recovery of CBZ is 94.9-104.8% in the application of actual water samples. This colorimetric method is simple, time-saving and low requirements for equipment, therefore, it holds great potential for CBZ detection in the environmental water samples.

Expanding the scope of chemiluminescence in bioanalysis with functional nanomaterials

Nanomaterial-enabled chemiluminescence (CL) detection has become a growing area of interest in recent years. We review the development of nanomaterial-based CL detection strategies and their applications in bioanalysis. Much progress has been achieved in the past decade, but most attempts still remain in the proof-of-concept stage. This review highlights recent advances in nanomaterials in CL detection and organizes them into three groups based on their role in detection: as a sensing platform, as a signal probe, and applications in homogeneous systems. Furthermore, we have discussed the critical challenges we are facing and future prospects of this field.

Sensitive CVG-AFS/ICP-MS label-free nucleic acid and protein assays based on a selective cation exchange reaction and simple filtration separation

Nowadays, label-free atomic spectrometric bioassays are attracting great research interest because of their advantages of low cost, simple design and operation, etc. Herein, a novel and simple chemical vapor generation-atomic fluorescence spectrometry (CVG-AFS)/inductively coupled plasma-mass spectrometry (ICP-MS) label-free detection method is presented for highly sensitive and selective assay of DNA and proteins. This work mainly combined a phenomenon that CdTe quantum dots (QDs) can be used to selectively differentiate free Hg2+ and the T-Hg2+-T complex, with the use of simple membrane filtration separation to improve the performance of the label-free bioassay methods. Upon hybridization with the DNA/protein (carcinoembryonic antigen, CEA) target, the T-Hg2+-T hairpin structure was opened and Hg2+ was released; this initiated the cation exchange reaction between Hg2+ and CdTe QDs which released Cd2+ simultaneously. Subsequently, the free Cd2+ was separated by the filtration membrane without separating the CdTe QDs, which could then be separated from the sample matrices for the CVG-AFS/ICP-MS assay. Under the optimal conditions, this method possessed high sensitivity for DNA and CEA determination with limits of detection (LODs) of 0.2 nM and 0.2 ng mL-1, and linear dynamic ranges of 1-160 nM and 0.5-20 ng mL-1, respectively, and exhibited excellent DNA sequence specificity and protein selectivity. This method preserves the advantages of the label-free atomic spectrometric bioassay, and combined with the selective cation exchange reaction and simple filtration separation to improve the performance.

A facile chemiluminescence sensing for ultrasensitive detection of heparin using charge effect of positively-charged AuNPs

Heparin is a glycosaminoglycan with the highest negative charge density of any known biological molecule. Herein, this highly negative charge structure of heparin and the charge effect from positively-charged AuNPs for luminol chemiluminescence (CL) reaction were combined to build a facile and sensitive CL strategy for detection of heparin. The highly negative charge structure of heparin molecules (four negatively-charged side groups per repeat unit) and the effective signal amplification of charge effect from positively-charged AuNPs make this analysis to display high sensitivity for heparin detection, and the detection limit is as low as 0.06 ng/mL. It is about two orders of magnitude lower than the previously reported colorimetric assay and far lower than the current analysis methods. The established CL strategy is to use the electrostatic interaction between heparin and signal probe (positively-charged AuNPs). Since polyanionic heparin has the highest negative charge in biological system, this CL sensing shows high selectivity for the detection of heparin, and hyaluronic acid (HA), an analogue of heparin, cannot cause interference. This CL sensing succeeded in detecting heparin in human serum samples. Besides, polycationic protamine, heparin antidote, can respond to the system's CL signals through its strong interactions with heparin, thus indirectly detecting protamine. For protamine in serum samples, the detection result was basically consistent with Coomassie brilliant blue assay.

Milk haptoglobin detection based on enhanced chemiluminescence of gold nanoparticles

The suggested research specifically addresses the major source of economic loss of the dairy industry, the bovine mastitis (BM), an inflammatory disease of mammary gland caused by bacterial intramammary infection. During udder inflammation, the concentrations of acute phase proteins (APP) in both plasma and milk are escalated, which can be distinctively utilized as predicting diagnostic biomarkers of cattle's BM clinical status. Herein, we demonstrate a liquid-phase luminol chemiluminescence (CL) system for sensitive detection of haptoglobin (Hp), a predictive APP of BM, by utilizing the binding capacity of hemoglobin (Hb). The CL intensity is linearly proportional to Hb-Hp complex formation, resulting in peroxidase-like activity inhibition of luminol-H₂O₂-Hb CL system. Enhanced CL, at least 10-fold effect within real samples, is attained by the addition of catalytically active cross-linked gold nanoparticles (GNPs) onto the luminol-H₂O₂ solution. Moreover, the influence of different somatic cell counts (representing subclinical and clinical BM status) and pathogen types (i.e., CNS and Streptococcus dysgalactiae) on the secreted milk Hp levels obtained from Holstein cows are established. The analyzed Hp concentrations are in agreement with a commercial enzyme-linked immunosorbent assay kit. The proposed CL sensing concept offers cost-effective, simple, label-free and reliable systematic analysis of Hp biomarker for BM, potentially initiating a positive effect on animals' health and overall economy of the dairy farms.

Nanotechnology-Enhanced No-Wash Biosensors for in Vitro Diagnostics of Cancer

In vitro biosensors have been an integral component for early diagnosis of cancer in the clinic. Among them, no-wash biosensors, which only depend on the simple mixing of the signal generating probes and the sample solution without additional washing and separation steps, have been found to be particularly attractive. The outstanding advantages of facile, convenient, and rapid response of no-wash biosensors are especially suitable for point-of-care testing (POCT). One fast-growing field of no-wash biosensor design involves the usage of nanomaterials as signal amplification carriers or direct signal generating elements. The analytical capacity of no-wash biosensors with respect to sensitivity or limit of detection, specificity, stability, and multiplexing detection capacity is largely improved because of their large surface area, excellent optical, electrical, catalytic, and magnetic properties. This review provides a comprehensive overview of various nanomaterial-enhanced no-wash biosensing technologies and focuses on the analysis of the underlying mechanism of these technologies applied for the early detection of cancer biomarkers ranging from small molecules to proteins, and even whole cancerous cells. Representative examples are selected to demonstrate the proof-of-concept with promising applications for in vitro diagnostics of cancer. Finally, a brief discussion of common unresolved issues and a perspective outlook on the field are provided.

The Applications of Gold Nanoparticle-Initialed Chemiluminescence in Biomedical Detection

Chemiluminescence technique as a novel detection method has gained much attention in recent years owning to the merits of high sensitivity, wider linear ranges, and low background signal. Similarly, nanotechnology especially for gold nanoparticles has emerged as detection tools due to their unique physical and chemical properties. Recently, it has become increasingly popular to couple gold nanoparticles with chemiluminescence technique in biological agents' detection. In this review, we describe the superiority of both chemiluminescence and gold nanoparticles and conclude the different applications of gold nanoparticle-initialed chemiluminescence in biomedical detection.

Design a New Strategy Based on Nanoparticle-Enhanced Chemiluminescence Sensor Array for Biothiols Discrimination

Array-based sensor is an interesting approach that suggests an alternative to expensive analytical methods. In this work, we introduce a novel, simple, and sensitive nanoparticle-based chemiluminescence (CL) sensor array for discrimination of biothiols (e.g., cysteine, glutathione and glutathione disulfide). The proposed CL sensor array is based on the CL efficiencies of four types of enhanced nanoparticle-based CL systems. The intensity of CL was altered to varying degrees upon interaction with biothiols, producing unique CL response patterns. These distinct CL response patterns were collected as “fingerprints” and were then identified through chemometric methods, including linear discriminant analysis (LDA) and hierarchical cluster analysis (HCA). The developed array was able to successfully differentiate between cysteine, glutathione and glutathione disulfide in a wide concentration range. Moreover, it was applied to distinguish among the above analytes in human plasma.

Simple and rapid chemiluminescence aptasensor for Hg2+ in contaminated samples: A new signal amplification mechanism

Detection of ultralow concentration of heavy metal ion Hg²⁺ is important for human health protection and environment monitoring because of the gradual accumulation in environmental and biological fields. Herein, we report a convenient chemiluminescence (CL) biosensing platform for ultrasensitive Hg²⁺ detection by signal amplification mechanism from positively charged gold nanoparticles ((+)AuNPs). It is based on (+)AuNPs charge effect and aptamer conformation change induced by target to stimulate the generation of CL in the presence of H₂O₂ and luminol without high salt medium. Notably particularly, the typical problem of the high salt medium from (-) AuNPs system, like influencing aptamers' bind with target and hindering CL reaction can be effectively addressed through the direct introduction of (+)AuNPs. Therefore, the proposed biosensing exhibits a high sensitivity toward target Hg²⁺ with a detection limit of 16 pM, which is far below the limit (10nM) defined by the U.S. Environmental Protection Agency in drinkable water, and is about 10-fold lower than the previously reported aptamer-based assays for Hg²⁺. This sensing platform provides a simple, rapid, and cost-effective approach for label-free sensitive detection of Hg²⁺. Moreover, it is universal for the detection of other targets. Undoubtedly, such a direct utilizing of (+)AuNPs' charge effect will provide a new signal amplification way for label-free aptamer-based CL analysis.

A simple and rapid chemiluminescence aptasensor for acetamiprid in contaminated samples: Sensitivity, selectivity and mechanism

Ultralow concentration and selective detection of pesticide residue is important to evaluate the environmental and biological pollution and the threat to human health which single component pesticide can bring. Herein, we report an amplified chemiluminescence (CL) sensing platform for ultrasensitive and selective acetamiprid (widely used pesticide) detection. It is based on aptamer's high binding affinity to target and the relevance between AuNPs' morphology and its catalytic effect to stimulate the generation of CL in the presence of H2O2 and luminol. Moreover, AuNPs morphological slight change induced by aptamers' conformation during targets binding could lead to the significant change of catalytic properties. Therefore, the proposed sensing platform for pesticide residue exhibited a high sensitivity toward acetamiprid with a detection limit of 62pM, which was about 100-fold lower than that of other aptamer-based sensor for acetamiprid detection. Because of the intrinsic specificity of aptamer's recognization, this sensing platform has high selectivity. So, this sensing platform provides a label-free and cost-effective approach for sensitive and selective detection of single component pesticide residue. More importantly, this CL method was successfully used to determine acetamiprid in real contaminated samples.

Synergistic catalysis by gold nanoparticles and metal ions for enhanced chemiluminescence

The first report of individual and synergistic roles of alkali metal ions and gold nanoparticles in the enhancement of luminol-Urea–H₂O₂ chemiluminescence. A maximum of 600% increase over control was evident for NaCl in synergy with gold nanoparticles.

Au nanoparticles enhanced fluorescence detection of DNA hybridization in picoliter microfluidic droplets

This work reports a facile microfluidic device for Au-nanoparticle enhanced fluorescence detection of tiny amount of nucleotides within droplets in a high-throughput way. Droplets containing single strand DNA probe and relevant complementary strands DNA(cDNA) are generated in flow-focusing manner and the hybridization between them is realized in droplets flowing along a long serpentine channel. In order to find the optimal experimental condition, finite element method simulation is used to predict the interface evolution between the two phase liquids. Based on the fluorescence emited by intercalator reacted with the generated double-strand DNA(dsDNA), the target cDNA with a concentration of 1nM can be detected in droplets. And when we adopt Au nanoparticles to immobilize DNA probe which can amplify the fluorescence intensity, 10pM completary DNA could be detected. Due to the advantages in high-throughput and compartmentalization of this droplet platform, the detection procedure can be finished in 3 h. Our method shows good potential application in facile, sensitive, low cost and fast DNA detection for applications in personal health care.

Luminol functionalized gold nanoparticles as colorimetric and chemiluminescent probes for visual, label free, highly sensitive and selective detection of minocycline

In this work, luminol functionalized gold nanoparticles (LuAuNPs) were used as colorimetric and chemiluminescent probes for visual, label free, sensitive and selective detection of minocycline (MC). The LuAuNPs were prepared by simple one-pot reduction of HAuCl₄ with luminol, which exhibited a good chemiluminescence (CL) activity owing to the presence of luminol molecules on their surface and surface plasmon resonance absorption. In the absence of MC, the color of LuAuNPs was wine red and their size was relatively small (∼25 nm), which could react with silver nitrate, producing a strong CL emission. Upon the addition of MC at acidic buffer solutions, the electrostatic interaction between positively charged MC and negatively charged LuAuNPs caused the aggregation of LuAuNPs, generating a purple or blue color. Simultaneously, the aggregated LuAuNPs did not effectively react with silver nitrate, producing a weak CL emission. The signal change was linearly dependent on the logarithm of MC concentration in the range from 30 ng to 1.0 μg for colorimetric detection and from 10 ng to 1.0 μg for CL detection. With colorimetry, a detection limit of 22 ng was achieved, while the detection limit for CL detection modality was 9.7 ng.

Effect of aggregated silver nanoparticles on luminol chemiluminescence system and its analytical application

We found that after silver nanoparticles (AgNPs) aggregated, its catalytic activity on luminol CL reaction obviously changed, and the change characteristic was closely related to the sizes of AgNPs. UV-visible spectra, X-ray photoelectron spectra, zeta potential and transmission electron microscopy studies were carried out to investigate the CL effect mechanism. The different CL responses of aggregated AgNPs with different size were suggested to be due to the two effects of quantum size and electron density in nanoparticle's conduction bands, and which one played a major role. The poisonous organic contaminants such as anilines, could induce the aggregation of AgNPs, were observed to affect effectively the luminol-H2O2-7 nm and 15 nm AgNPs CL systems and were detectable by use of a flow injection method with the enhanced or inhibited CL detection.

Chemiluminescence determination of trimetazidine via inducing the aggregation of gold nanoparticles

A simple, rapid and sensitive chemiluminescence (CL) method combined with flow injection analysis was developed for the determination of trimetazidine. Trimetazidine was found to significantly increase the CL signal arising from N-bromosuccinimide-luminol reaction in the presence of gold nanoparticles. The enhanced CL intensity was proportional to trimetazidine concentration in the range of 0.01-5.0 μg/mL, with a limit of detection (3 sb) of 6.7 ng/mL. The relative standard deviation was 2.8% for 11 repetitive measurements of 0.1 μg/mL trimetazidine solution. The practicality of the method was evaluated by determining trimetazidine in pharmaceutical formulations and in spiked human serum samples. Moreover, the possible CL reaction mechanism was also discussed.

Enhanced effect of aggregated gold nanoparticles on luminol chemiluminescence system and its analytical application

Some organic compounds containing groups of OH, NH2, or SH, which could induce the aggregation of gold nanoparticles (AuNPs), were observed to enhance effectively the luminol-H2O2-2.6 nm AuNPs CL system. It was found that the aggregation of AuNPs was an important effect factor for the catalytic activity of AuNPs on luminol CL system. The aggregated AuNPs could effectively enhance luminol CL signal compared with the dispersed one. The enhanced effect was closely related to the sizes of AuNPs. Among the studied AuNPs with seven sizes, 2.6 nm AuNPs had the greatest enhancement effect on luminol CL system after its aggregation. The CL enhancement mechanism was investigated, and the marked enhancement of aggregated 2.6 nm AuNPs for luminol CL system was supposed to originate from the decrease of AuNPs' surface negative charge density compared to its dispersed state. For the luminol-H2O2-2.6 nm AuNPs CL system in the presence of organic compounds containing groups of OH, NH2, or SH, more than one factor played the role in influencing the CL intensity. It was found that the enhanced effect of aggregated 2.6 nm AuNPs induced by such organic compounds was much more significant than the inhibition effect of reducing groups of OH, NH2, or SH, which made it applicable for the determination of this kind of compounds.

Conjugated polyelectrolytes-initiated chemiluminescence: a biosensing platform for label-free and homogeneous DNA detection

In this study, it was found that conjugated polyelectrolytes (CPEs) would initiate the strong chemiluminescence (CL) emission of luminol-H2O2 in weak basic media. Using CL spectra, ultraviolet visible light spectra, fluorescence spectra and electron spin resonance (ESR) spectra, the catalytic mechanism of CPEs on luminol-H2O2 CL was discussed in detail. Furthermore, it was found that the catalytic activity of poly [3-(3'-N,N,N-triethylamino-1'-propyloxy)-4-methyl-2,5-thiophene hydro chloride] (PMNT) (a kind of cationic CPEs) on the luminol-H2O2 CL system was closely relevant to the conformation of PMNT. The CL intensity of luminol-H2O2-PMNT system in the presence of single-stranded DNA was much larger than that in the presence of double-stranded DNA. By taking advantage of this phenomenon, a label-free and homogeneous CL detection of DNA hybridization is proposed. The detection limit of target DNA (3σ) was estimated to be as low as 3.7×10(-13)M. The present CL method for DNA hybridization detection offers the advantages of being simple, cheap, rapid and sensitive.

An ultrasensitive chemiluminescence biosensor for carcinoembryonic antigen based on autocatalytic enlargement of immunogold nanoprobes

A sensitive flow injection chemiluminescence assay for carcinoembryonic antigen (CEA) detection based on signal amplification with gold nanoparticles (NPs) is reported in the present work. The sandwich system of CEA/anti-CEA/goat-anti-mouse IgG functionalized Au nanoparticles was used as the sensing platform. In order to improve detection sensitivity, a further gold enlargement step was developed based on the autocatalytic Au deposition of gold nanoprobes via the reduction of AuCl₄⁻ to Au⁰ on their surface in the presence of NH₂OH·HCl. AuCl₄⁻, which is a soluble product of gold nanoprobes, served as an analyte in the CL reaction for the indirect measurement of CEA. Under optimized conditions, the CL intensity of the system was linearly related to the logarithm of CEA concentration in the range of 100 pg·mL⁻¹ to 1,000 ng·mL⁻¹, with a detection limit of 20 pg·mL⁻¹.

Chemiluminescent cholesterol sensor based on peroxidase-like activity of cupric oxide nanoparticles

A chemiluminescent cholesterol sensor with good selectivity and enhanced sensitivity was constructed based upon the peroxidase-like activity of cupric oxide nanoparticles. Cupric oxide nanoparticles can catalyze the oxidation of luminol by H2O2, which was produced by the reaction of cholesterol and oxygen that was catalyzed by cholesterol oxidase. Therefore, the oxidation of cholesterol could be transduced into the chemiluminescence of luminol by combining these two reactions. Under the optimum conditions, the CL intensity was proportional to the concentration of cholesterol over the range of 0.625-12.5μM and a detection limit was 0.17μM. The applicability of proposed method has been validated by determination of cholesterol in milk powder and human serum samples with satisfactory results.

CdS nanoparticles-enhanced chemiluminescence and determination of baicalin in pharmaceutical preparations

CdS nanoparticles (CdS NPs) of different sizes were synthesized by the citrate reduction method. It was found that CdS NPs could enhance the chemiluminescence (CL) of the luminol-potassium ferricyanide system and baicalin could inhibit CdS NPs-enhanced luminol-potassium ferricyanide CL signals in alkaline solution. Based on this inhibition, a flow-injection CL method was established for determination of baicalin in pharmaceutical preparations and human urine samples. Under optimized conditions, the linear range for determination of baicalin was 5.0 x 10(-6) to 1.0 x 10(-3) g/L. The detection limit at a signal-to-noise ratio of 3 was 1.7 x 10(-6) g/L. CL spectra, UV-visible spectra and transmission electron microscopy (TEM) were used to investigate the CL mechanism. The method described is simple, selective and obviates the need of extensive sample pretreatment.

Gold nanoparticles in the clinical laboratory: principles of preparation and applications

In order to meet the challenges of effective healthcare, the clinical laboratory is constantly striving to improve testing sensitivity while reducing the required time and cost. Gold nanoparticles (AuNPs) are proposed as one of the most promising tools to meet such goals. They have unique optophysical properties which enable sensitive detection of biomarkers, and are easily amenable to modification for use in different assay formats including immunoassays and molecular assays. Additionally, their preparation is relatively simple and their detection methods are quite versatile. AuNPs are showing substantial promise for effective practical applications and commercial utilization is already underway. This article covers the principles of preparation of AuNPs and their use for development of different diagnostic platforms.

Chemiluminescence biosensors for DNA detection using graphene oxide and a horseradish peroxidase-mimicking DNAzyme

In this communication, we demonstrate that graphene oxide (GO) greatly inhibits the peroxidatic activity of a horseradish peroxidase-mimicking DNAzyme. Combining this observation with the unique DNA/GO interactions, an ultrasensitive GO-based chemiluminescence DNA biosensing platform is developed.

4-(dimethylamino)butyric acid@PtNPs as enhancer for solid-state electrochemiluminescence aptasensor based on target-induced strand displacement

A solid-state electrochemiluminescence (ECL) aptasensor based on target-induced aptamer displacement for highly sensitive detection of thrombin was developed successfully using 4-(dimethylamino)butyric acid (DMBA)@PtNPs labeling as enhancer. Such a special aptasensor included three main parts: ECL substrate, ECL intensity amplification and target-induced aptamer displacement. The ECL substrate was made by modifying the complex of Pt nanoparticles (PtNPs) and tris(2,2-bipyridyl) ruthenium (II) (Ru(bpy)(3)(2+)) (Ru-PtNPs) onto nafion@multi-walled carbon nanotubes (nafion@MWCNTs) modified electrode surface. A complementary thrombin aptamer labeled by DMBA@PtNPs (Aptamer II) acted as the ECL intensity amplification. The thrombin aptamer (TBA) was applied to hybridize with the labeled complementary thrombin aptamer, yielding a duplex complex of TBA-Aptamer II on the electrode surface. The introduction of thrombin triggered the displacement of Aptamer II from the self-assembled duplex into the solution and the association of inert protein thrombin on the electrode surface, decreasing the amount of DMBA@PtNPs and increasing the electron transfer resistance of the aptasensor and thus resulting large decrease in ECL signal. With the synergistic amplification of DMBA and PtNPs to Ru(bpy)(3)(2+) ECL, the aptasensor showed an enlarged ECL intensity change before and after the detection of thrombin. As a result, the change of ECL intensity has a direct relationship with the logarithm of thrombin concentration in the range of 0.001-30 nM. The detection limit of the proposed aptasensor is 0.4 pM. Thus, the approach is expected to open new opportunities for protein diagnostics in clinical as well as bioanalysis in general.

Silver nanoparticle-initiated chemiluminescence reaction of luminol-AgNO3 and its analytical application

Ag(+) has been regarded as an inert chemiluminescent oxidant. In this work, it was found that in the presence of silver nanoparticles (AgNPs), AgNO(3) could react with luminol to produce strong chemiluminescence (CL). The AgNPs with smaller size could initiate stronger CL emission. To investigate the CL mechanism of the AgNPs-luminol-AgNO(3) system, the UV-visible spectra and the CL spectrum of the CL system were obtained. The CL reaction mechanism involving catalysis was proposed. Compared with the reported nanoparticles-luminol-H(2)O(2) CL system, the AgNPs-luminol-AgNO(3) CL system has the advantages of low background and good stability. Moreover, the new CL system was used in immunoassay for IgG.

Label free DNA detection based on gold nanoparticles quenching fluorescence of Rhodamine B

A novel and sensitive label free DNA detection method using gold nanoparticles (GNPs) and Rhodamine B (RB) has been developed. The assay is based on the following two properties. One is the different adsorption properties of single-stranded and double-stranded DNA on GNPs in colloidal solution. The other is the different quenching ability of aggregated GNPs and dispersed GNPs on RB. Un-aggregated GNPs could effectively quench the fluorescence of RB. However, the quenching ability greatly decreases after GNPs aggregated. The hybridization of probe DNA and target DNA is monitored by the fluorescence detection after the RB is added to the solution. Under the optimal experimental conditions, the detection limit of this assay is 2.9×10(-13) mol L(-1).

Immunochromatographic strip test for detection of genus Cronobacter

Members of the genus Cronobacter are opportunistic pathogens formerly known as Enterobacter sakazakii, which induce severe meningitis and sepsis in neonates and infants, with a high fatality rate. In this work, a simple and rapid immunochromatographic strip test for the detection of this pathogen was developed. Following the shortened bacteria cultivation and isolation of DNA, a specific gene sequence targeting 16S rRNA from Cronobacter spp. was amplified by PCR using 5'-end labelled specific primers. The PCR product, amplicon labelled with digoxigenin on one side and biotin on the other side, was directly added to the immunochromatographic strip test, composed of nitrocellulose membrane with bound antibody against digoxigenin in the test line. The visualization was mediated by colloidal carbon conjugated to neutravidin, and the appearance of grey/black line was indicative of the presence of specific amplicon. Colour intensity of the test line in pathogen-positive assay was visually distinguishable from that of negative sample within 10 min. The visual detection limit of PCR product was 8 ng. The specificity of the developed method was confirmed by standard microbiological techniques. Whole detection procedure with the incorporated immunostrip was applied to analysis of infant formulae samples, contaminated with less than 10 cells of Cronobacter spp. per 10 g. The results from immunochromatographic test indicated the absolute agreement with those from standard microbiological methods. Moreover, the developed procedure considerably reduced the total analysis time to 16 h whereas the reference microbiological method needs 6-7 days.

A sensitive, label-free, aptamer-based biosensor using a gold nanoparticle-initiated chemiluminescence system

We report a label-free, aptamer-based chemiluminescent biosensor. The biosensor relies upon the catalytic activity of unmodified gold nanoparticles (AuNPs) on the luminol-H(2)O(2) chemiluminescence (CL) reaction, and the interaction of unmodified AuNPs with the aptamer. The unmodified AuNPs can effectively differentiate unstructured and folded aptamer. The binding of the aptamer with the target can induce the AuNP aggregation in the presence of 0.5 M NaCl, and after aggregation the catalytic activity of the AuNPs on the luminol-H(2)O(2) CL reaction is greatly enhanced. During the assay, no covalent functionalization of the AuNPs or aptamer is required. The detection limit of thrombin was estimated to be as low as 26 fM, and the sensitivity was more than 4 orders of magnitude better than that of known AuNP-based colorimetric methods for the detection of thrombin. This aptamer-based biosensor offers the advantages of being simple, cheap, rapid, and sensitive.

Hydroxylamine-amplified gold nanoparticles for the homogeneous detection of sequence-specific DNA

Herein, we report the development of a simple, sensitive, inexpensive, and homogeneous detection method for the analysis of DNA hybridization based on the optical properties of hydroxylamine-amplified gold nanoparticles (Au NPs) in solution phase. The assay relies on a sandwich-type DNA hybridization in which DNA targets are first hybridized with capture DNA probes immobilized on the surface of magnetic beads and then sandwiched with Au NPs modified with biotinylated reporter DNA. Au NPs, after being anchored on the magnetic beads, are then dispersed in solution by the dehybridization and enlarged by using a mixture of HAuCl(4) and NH(2)OH. The Au NP growth signal which is used for the quantitative analysis of sequence-specific DNA can be easily monitored by the naked eye directly or an UV-vis spectrophotometer. Surface plasmonic signature of the enlarged Au NPs and the kinetics of the Au NP growth in the homogenous phase containing of HAuCl(4) and NH(2)OH have also been studied. As a result, such a homogeneous assay allows the detection of 30-base DNA targets down to the 100 amol level, which offers great promise for facilitating sensitive detection of other biorecognition events.