Direct immobilisation of antibodies on a bioinspired architecture as a sensing platform

Bio-inspired polydopamine layer as a versatile functionalisation protocol for silicon-based photonic biosensors

Photonic biosensors have made major advances in recent years, achieving very high sensitivity, and progressing towards point-of-care deployment. By using photonic resonances, sensors can be label-free, which is particularly attractive for a low-cost technological realisation. A key remaining issue is the biological interface and the efficient and reliable immobilisation of binder molecules such as antibodies; many protocols are currently in use that have led to widely varying sensor performance. Here, we study a very simple and robust surface functionalisation protocol for silicon photonics, which is based on polydopamine, and we demonstrate both its simplicity and its high performance. The use of polydopamine (PDA) is inspired by molluscs, especially mussels, that employ dopamine to adhere to virtually any surface, especially in an aqueous environment. We studied the versatility of the PDA protocol by showing compatibility with 5 different disease biomarkers (Immunoglobulin (IgG), C-reactive protein (CRP), Tumour Necrosis factor-α (TNF-α), Interleukin-6 (IL-6), Matrix metalloproteinase (MMP-9) and show that the protocol is resistant to hydrolysis during incubation; the loss of functionality due to hydrolysis is a major issue for many of the functionalisation protocols commonly used for silicon-based sensors. The study using guided mode resonance-based sensors highlights the wide dynamic range of the protocol (0.01 ng/mL to 1 μg/mL), using IgG, CRP and MMP-9 protein biomarkers as exemplars. In addition, we show that the surface chemistry allows performing measurements in 10% human serum with a sensitivity as low as 10 ng/mL for IgG. We suggest that adopting this protocol will make it easier for researchers to achieve biofunctionalisation and that the biosensor community will be able to achieve more consistent results.

Graphene Oxide-Magnetic Nanoparticles Loaded Polystyrene-Polydopamine Electrospun Nanofibers Based Nanocomposites for Immunosensing Application of C-Reactive Protein

The large surface area/volume ratio and controllable surface conformation of electrospun nanofibers (ENFs) make them highly attractive in applications where a large surface area is desired, such as sensors and affinity membranes. In this study, nanocomposite-based ENFs were produced and immobilization of Anti-CRP was carried out for the non-invasive detection of C-reactive protein (CRP). Initially, the synthesis of graphene oxide (GO) was carried out and it was modified with magnetic nanoparticles (MNP, Fe₃O₄) and polydopamine (PDA). Catechol-containing and quinone-containing functional groups were created on the nanocomposite surface for the immobilization of Anti-CRP. Polystyrene (PS) solution was mixed with rGO-MNP-PDA nanocomposite and PS/rGO-MNP-PDA ENFs were produced with bead-free, smooth, and uniform. The surface of the screen-printed carbon electrode (SPCE) was covered with PS/rGO-MNP-PDA ENFs by using the electrospinning technique under the determined optimum conditions. Next, Anti-CRP immobilization was carried out and the biofunctional surface was created on the PS/rGO-MNP-PDA ENFs coated SPCE. Moreover, PS/rGO-PDA/Anti-CRP and PS/MNP-PDA/Anti-CRP immunosensors were also prepared and the effect of each component in the nanocomposite-based electrospun nanofiber (MNP, rGO) on the sensor response was investigated. The analytic performance of the developed PS/rGO-MNP-PDA/Anti-CRP, PS/rGO-PDA/Anti-CRP, and PS/MNP-PDA/Anti-CRP immunosensors were examined by performing electrochemical measurements in the presence of CRP. The linear detection range of PS/rGO-MNP-PDA/Anti-CRP immunosensor was found to be from 0.5 to 60 ng/mL and the limit of detection (LOD) was calculated as 0.33 ng/mL for CRP. The PS/rGO-MNP-PDA/Anti-CRP immunosensor also exhibited good repeatability with a low coefficient of variation.

3D hierarchically porous magnetic molybdenum trioxide@gold nanospheres as a nanogap-enhanced Raman scattering biosensor for SARS-CoV-2

The global pandemic of COVID-19 is an example of how quickly a disease-causing virus can take root and threaten our civilization. Nowadays, ultrasensitive and rapid detection of contagious pathogens is in high demand. Here, we present a novel hierarchically porous 3-dimensional magnetic molybdenum trioxide-polydopamine-gold functionalized nanosphere (3D mag-MoO3-PDA@Au NS) composed of plasmonic, semiconductor, and magnetic nanoparticles as a multifunctional nanosculptured hybrid. Based on the synthesized 3D mag-MoO3-PDA@Au NS, a universal "plug and play" biosensor for pathogens is proposed. Specifically, a magnetically-induced nanogap-enhanced Raman scattering (MINERS) detection platform was developed using the 3D nanostructure. Through a magnetic actuation process, the MINERS system overcomes Raman signal stability and reproducibility challenges for the ultrasensitive detection of SARS-CoV-2 spike protein over a wide dynamic range up to a detection limit of 10-15 g mL-1. The proposed MINERS platform will facilitate the broader use of Raman spectroscopy as a powerful analytical detection tool in diverse fields.

Polydopamine nanospheres as high-affinity signal tag towards lateral flow immunoassay for sensitive furazolidone detection

Currently, the low sensitivity and poor binding stability of detection probe prepared via electrostatic adsorption have become the dilemmas of colloidal gold-based lateral flow immunoassays (Au-LFIAs). In this connection, polydopamine nanospheres (PDA NPs) with an eminent covalent connectivity property were introduced as a promising substitute to improve the stability of probe and sensitivity of LFIA. Whereafter, the PDA NPs-based LFIA was applied for the monitoring of furazolidone (FZD) in food samples because of the potential carcinogenic/mutagenic effects to human of its metabolite (3-amino-2-oxazolidinone, AOZ). Compared with electrostatic adsorption, the binding stability of PDA NPs-based probes was superior. And, as expected, the PDA NPs-based LFIA biosensor exhibited higher sensitivity than that of the Au-LFIA with a detection limit of 3.5 ng mL^-1 for AOZ by naked-eye readout. Based on the significant enhanced binding stability and sensitivity, the PDA NPs-based LFIA is of certain spreading value for detecting other analytes.

Fluorometric detection of sulfate-reducing bacteria via the aggregation-induced emission of glutathione-gold(I) complexes

It is reported that gold(I)-thiolate complexes can display aggregation-induced emission (AIE) similar to organic fluorogens. On addition of lead(II) to glutathione-gold(I) complexes, a supermolecular structure of type GSH-Au(I)-Pb(II) is formed through strong coordination between Pb(II) and GSH. Its fluorescence is quenched by sulfide due to the formation of PbS which destroys the GSH-Au(I)-Pb(II) complex. The finding was used to design a method for fluorometric detection of sulfate-reducing bacteria (SRB) which produce sulfide. The time needed to reduce fluorescence to 10% of its initial intensity linearly dependent on the logarithm of the SRB concentrations in the ranging from 10 to 1 × 10^7 cfu mL^-1. The assay time is also reduced down to 4 days even if the SRB concentration is as low as 10 cfu mL^-1. Graphical abstract Schematic presentation of aggregation-induced emission (AIE)-active GSH-Au(I) complexes based fluorescence detection of SRB. The GSH-Au(I) complexes turn into aggregation and display strong emissive property in the presence of Pb²⁺. Then the fluorescence of GSH-Au(I)-Pb(II) complexes can be quenched by S^2- generated by SRB.

Dopamine-mediated immunoassay for bacteria detection

Traditional enzyme-linked immunosorbent assay (ELISA) with sufficient sensing specificity is a useful analytical approach for the detection of toxicologically important substances in in vivo systems or complicated biological systems. Increasing worldwide demand for analyses of bacteria by signal amplification and increasing concern regarding their safe development and use require a simple, stable, and sensitive detection assay for target evaluation and clinical diagnosis. A sensitive and selective immunoassay for detection of bacteria is constructed that combines horseradish peroxidase (HRP)-catalyzed signal amplification with the strong linker of the polydopamine-biotin complex on the surface of solid substances or biomolecules. The incorporation of HRP labeling and amplification increases the detection sensitivity by about one to two orders of magnitude compared with conventional ELISA systems. A linear relationship between the response and the logarithm of the bacterial concentration was observed in the range from 1.5 × 10² to 1.5 × 10⁷ colony-forming units per milliliter. This work demonstrates a new signal-amplification-based dopamine-mediated process for the development of a sensitive method. This dopamine-mediated immunoassay may be broadly applied in clinical diagnoses and for the monitoring of water environmental pollution. The approach proposed is distinct with simple protocols and easy processes, which allow it to be applied in a broad area.

Photoelectrochemical sensitive detection of insulin based on CdS/polydopamine co-sensitized WO3 nanorod and signal amplification of carbon nanotubes@polydopamine

An ultrasensitive photoelectrochemical sandwich immunosensor was designed for detection of insulin based on WO₃/CdS/polydopamine (WO₃/CdS/PDA) co-sensitized and PDA@carbon nanotubes (PDA@CNT) conjugates for signal amplification. The CdS nanoparticles were first deposited on the WO₃ nanorods via sequential chemical bath deposition to form the WO₃/CdS structure to enhance photocurrent. Then equipped with PDA to form the WO₃/CdS/PDA photosensitive structure. The PDA was used not only to reduce the toxicity of CdS but also adsorb insulin primary antibodies (Ab₁). Meanwhile, insulin secondary antibodies (Ab₂) were decorated by PDA@CNT conjugates for signal amplification and further enhance photocurrent. Different photocurrent intensities were obtained by the photoelectrochemical workstation at applied bias of 0V due to the different amount of the PDA@CNT conjugates introduced by the different concentrations of insulin. A good linear relationship was obtained between the increased photocurrent and insulin concentrations range from 0.01ngmL^-1 to 50ngmL^-1. And a detection limit of 2.8pgmL^-1 was obtained. The proposed sensor was applied to the determination of the insulin in human serum sample, and satisfactory results were obtained. The sensor presented good specificity, reproducibility and stability, thus it might find application in the clinical diagnosis of insulin or other biomarkers in the near future.

Recent developments in polydopamine: an emerging soft matter for surface modification and biomedical applications

After more than four billion years of evolution, nature has created a large number of fascinating living organisms, which show numerous peculiar structures and wonderful properties. Nature can provide sources of plentiful inspiration for scientists to create various materials and devices with special functions and uses. Since Messersmith proposed the fabrication of multifunctional coatings through mussel-inspired chemistry, this field has attracted considerable attention for its promising and exiciting applications. Polydopamine (PDA), an emerging soft matter, has been demonstrated to be a crucial component in mussel-inspired chemistry. In this review, the recent developments of PDA for mussel-inspired surface modification are summarized and discussed. The biomedical applications of PDA-based materials are also highlighted. We believe that this review can provide important and timely information regarding mussel-inspired chemistry and will be of great interest for scientists in the chemistry, materials, biology, medicine and interdisciplinary fields.

Stability research on polydopamine and immobilized albumin on 316L stainless steel

In this study, the polydopamine (PDA) film was coated on polished 316Lss and then thermally treated at 150 °C (labeled as PDA-Th150), and the stability of coatings was also investigated. Straining test indicated that PDA-Th150 coating performed better in affording sufficient adherence to 316 L SS substrate. Moreover, both PDA and PDA-Th150 coating suffered slight swelling during immersion in deionized water (pH = 6.5). X-ray photoelectron spectroscopy results showed that during immersion, latent nucleophilic reaction via amines inside PDA coating occurred. This led to an enhanced cross-linking and thus gradually promoted the coating stability. Moreover, larger amount of bovine serum albumin (BSA) was immobilized onto PDA-Th150 coating and performed well in anti-platelet adhesion. A high retention of immobilized BSA was observed even after immersion for 30 days. These tests suggested that PDA was stable enough and performed well in surface functionalization, which might enrich the research and application of PDA.

Ultrasensitive microfluidic analysis of circulating exosomes using a nanostructured graphene oxide/polydopamine coating

Exosomes are cell-derived nano-sized vesicles that have been recently recognized as new mediators for many cellular processes and potential biomarkers for non-invasive disease diagnosis and the monitoring of treatment response. To better elucidate the biology and clinical value of exosomes, there is a pressing need for new analytical technologies capable of the efficient isolation and sensitive analysis of such small and molecularly diverse vesicles. Herein, we developed a microfluidic exosome analysis platform based on a new graphene oxide/polydopamine (GO/PDA) nano-interface. To the best of our best knowledge, we report for the first time, the GO-induced formation of a 3D nanoporous PDA surface coating enabled by the microfluidic layer-by-layer deposition of GO and PDA. It was demonstrated that this nanostructured GO/PDA interface greatly improves the efficiency of exosome immuno-capture, while at the same time effectively suppressing non-specific exosome adsorption. Based on this nano-interface, an ultrasensitive exosome ELISA assay was developed to afford a very low detection limit of 50 μL(-1) with a 4 log dynamic range, which is substantially better than the existing methods. As a proof of concept for clinical applications, we adapted this platform to discriminate ovarian cancer patients from healthy controls by the quantitative detection of exosomes directly from 2 μL plasma without sample processing. Thus, this platform could provide a useful tool to facilitate basic and clinical investigations of exosomes for non-invasive disease diagnosis and to aid precision treatment.

Shape-controlled gold nanoparticles supported on MoS₂ nanosheets: synergistic effect of thionine and MoS₂ and their application for electrochemical label-free immunosensing

Herein, a facile approach for shape-controlled gold nanoparticle (AuNP) decorated thionine-MoS2 nanocomposites (AuNP-Thi-MoS2) had been reported by using the synergistic effect of MoS2 and Thi. Thi was not only used as an electrochemical indicator, but also as a reducing agent to tune the resulting morphologies of AuNPs. With the ratio of MoS2/Thi decreasing, the shapes of AuNPs changed from spherical, triangle, clover-like to flower-like nanostructures. TEM, XRD and XPS were employed to characterize the formation and chemical composition of AuNP-Thi-MoS2 nanocomposites. On the basis of synthesis, a MoS2-based label-free electrochemical immunosensor had been designed to detect carcino-embryonic antigen (CEA). The proposed immunosensor could detect as low as 0.52 pg mL(-1) CEA with excellent selectivity. Moreover, the expected immunosensor showed high stability and excellent reproducibility, which could detect CEA in human serum with satisfactory results. Therefore, the AuNP-Thi-MoS2 nanocomposites may be considered as a candidate sensing platform for fabrication of simple, label-free and ultrasensitive electrochemical sensors.

A biomimetic mussel-inspired photoelectrochemical biosensing chip for the sensitive detection of CD146

A universal biomimetic mussel-inspired photoelectrochemical biosensing chip was constructed by a polydopamine coating strategy.

First step toward near-infrared continuous glucose monitoring: in vivo evaluation of antibody coupled biomaterials

Continuous glucose monitoring (CGM) is crucial in diabetic care. Long-term CGM systems however require an accurate sensor as well as a suitable measuring environment. Since large intravenous sensors are not feasible, measuring inside the interstitial fluid is considered the best alternative. This option, unfortunately, has the drawback of a lag time with blood glucose values. A good strategy to circumvent this is to enhance tissue integration and enrich the peri-implant vasculature. Implants of different optically transparent biomaterials (poly(methyl-methacrylate) [PMMA] and poly(dimethylsiloxane) [PDMS]) - enabling glucose monitoring in the near-infrared (NIR) spectrum - were surface-treated and subsequently implanted in goats at various implantation sites for up to 3 months. The overall in vivo biocompatibility, tissue integration, and vascularization at close proximity of the surfaces of these materials were assessed. Histological screening showed similar tissue reactions independent of the implantation site. No significant inflammation reaction was observed. Tissue integration and vascularization correlated, to some extent, with the biomaterial composition. A modification strategy, in which a vascular endothelial-cadherin antibody was coupled to the biomaterials surface through a dopamine layer, showed significantly enhanced vascularization 3 months after subcutaneous implantation. Our results suggest that the developed strategy enables the creation of tissue interactive NIR transparent packaging materials, opening the possibility of continuous glucose monitoring.

A facile approach to construct versatile signal amplification system for bacterial detection

In this work, a facile approach to design versatile signal amplification system for bacterial detection has been presented. Bio-recognition elements and signaling molecules can be immobilized on the surface of Fe₃O₄@MnO₂ nanomaterials with the help of bioinspired polydopamine (PDA). Fe₃O₄@MnO₂ nanoplates were chosen as carrier for bio-recognizing and signaling molecules because this kind of nanomaterial was superparamagnetic and the existence of MnO₂ could enhance the polymerization of dopamine due to its strong oxidative ability. This nanocomposite system was versatile because PDA around Fe₃O₄@MnO₂ nanoplates provided a stable and convenient platform for immobilization of biological and chemical materials, and various kinds of bio-recognizing and signaling molecules could be immobilized by reaction with pendant amino groups of dopamine to meet different detection requirements. Since a substantial amount of signaling molecules were immobilized on the surface of the nanocomposites, so the sensitivity of detection would be improved when the prepared nanocomposites were selectively conjugated with target pathogen. In the experimental section, a sandwich-type electrochemical biosensor was developed to verify the amplified bacterial detection sensitivity. Concanavalin A (conA) and ferrocene (Fc) were chosen as bio-recognition elements and signaling molecules for detection of Desulforibrio caledoiensis, respectively. The conA and Fc modified nanocomposites were conjugated on electrode by the selective recognition between conA and target bacteria, and the bacterial population was obtained by quantification of the electrochemical signal of Fc moieties. The experimental results showed that the detection sensitivity for D. caledoiensis was improved by taking advantage of this signal amplification system.

Electrospun fibers immobilized with bone forming peptide-1 derived from BMP7 for guided bone regeneration

The development of ideal barrier membranes with appropriate porosity and bioactivity is essential for the guidance of new bone formation in orthopedic and craniomaxillofacial surgery. In this study, we developed bioactive electrospun fibers based on poly (lactide-co-glycolic acid) (PLGA) by immobilizing bone-forming peptide 1 (BFP1) derived from the immature region of bone morphogenetic protein 7 (BMP7). We exploited polydopamine chemistry for the immobilization of BFP1; polydopamine (PD) was coated on the electrospun PLGA fibers, on which BFP1 was subsequently immobilized under weakly basic conditions. The immobilization of BFP1 was verified by characterizing the surface chemical composition and quantitatively measured by fluorescamine assay. The immobilization of BPF1 on the electrospun fibers supported the compact distribution of collagen I and the spreading of human mesenchymal stem cells (hMSCs). SEM micrographs demonstrated the aggregation of globular mineral accretions, with significant increases in ALP activity and calcium deposition when hMSCs were cultured on fibers immobilized with BFP1 for 14 days. We then implanted the prepared fibers onto mouse calvarial defects and analyzed bone formation after 2 months. Semi-quantification of bone growth from representative X-ray images showed that the bone area was approximately 20% in the defect-only group, while the group implanted with PLGA fibers showed significant improvements of 44.27 ± 7.37% and 57.59 ± 15.24% in the groups implanted with PD-coated PLGA and with BFP1-coated PLGA, respectively. Based on these results, our approach may be a promising tool to develop clinically-applicable bioactive membranes for guided bone regeneration."

Catechol-based biomimetic functional materials

Catechols are found in nature taking part in a remarkably broad scope of biochemical processes and functions. Though not exclusively, such versatility may be traced back to several properties uniquely found together in the o-dihydroxyaryl chemical function; namely, its ability to establish reversible equilibria at moderate redox potentials and pHs and to irreversibly cross-link through complex oxidation mechanisms; its excellent chelating properties, greatly exemplified by, but by no means exclusive, to the binding of Fe(3+); and the diverse modes of interaction of the vicinal hydroxyl groups with all kinds of surfaces of remarkably different chemical and physical nature. Thanks to this diversity, catechols can be found either as simple molecular systems, forming part of supramolacular structures, coordinated to different metal ions or as macromolecules mostly arising from polymerization mechanisms through covalent bonds. Such versatility has allowed catechols to participate in several natural processes and functions that range from the adhesive properties of marine organisms to the storage of some transition metal ions. As a result of such an astonishing range of functionalities, catechol-based systems have in recent years been subject to intense research, aimed at mimicking these natural systems in order to develop new functional materials and coatings. A comprehensive review of these studies is discussed in this paper.

Fabrication of tunable micropatterned substrates for cell patterning via microcontact printing of polydopamine with poly(ethylene imine)-grafted copolymers

Cell patterning is an important tool for biomedical research. In this work, we modified a technique combining mussel-inspired surface chemistry and microcontact printing (μCP) to modulate surface chemistry for cell patterning. Polymerized dopamine on poly(dimethylsiloxane) stamps was transferred to several cell-unfavorable substrates via μCP. Since cells only attached to the polydopamine (PDA)-imprinted areas, cell patterns were formed on a variety of cell-unfavorable surfaces. The stability of PDA imprints was proved under several harsh conditions. The cell affinity of PDA was modulated by co-deposition with several poly(ethylene imine) (PEI)-based copolymers, such as PEI, PEI-g-PEG (poly(ethylene glycol)) and PEI-g-galactose. The imprints of PDA/PEI-g-PEG provide the formation of cell patterns on cell-favorable substrates. Neuronal PC12 cells were patterned via imprinting of PDA/PEI, while HepG2/C3A cells were arranged on the imprint of PDA/PEI-g-galactose. Finally, co-culture of HepG2/C3A cells and L929 fibroblasts was accomplished by our micropatterning approach. This study demonstrated this simple and economic technique provides a powerful tool for development of functional patterned substrates for cell patterning. This technique should profit the preparation of cell patterns to study fundamental cell biology and to apply to biomedical engineering such as cell-based biosensors, diagnostic devices and tissue engineering.

Tunable micropatterned substrates based on poly(dopamine) deposition via microcontact printing

A simple technique was developed to fabricate tunable micropatterned substrates based on mussel-inspired surface modification. Polydopamine (PDA) was developed on polydimethylsiloxane (PDMS) stamps and was easily imprinted to several substrates such as glass, silicon, gold, polystyrene, and poly(ethylene glycol) via microcontact printing. The imprinted PDA retained its unique reactivity and could modulate the chemical properties of micropatterns via secondary reactions, which was illustrated in this study. PDA patterns imprinted onto a cytophobic and nonfouling substrates were used to form patterns of cells or proteins. PDA imprints reacted with nucleophilic amines or thiols to conjugate molecules such as poly(ethylene glycol) for creating nonfouling area. Gold nanoparticles were immobilized onto PDA-stamped area. The reductive ability of PDA transformed silver ions to elemental metals as an electroless process of metallization. This facile and economic technique provides a powerful tool for development of a functional patterned substrate for various applications.

Bio-inspired strategy for on-surface synthesis of silver nanoparticles for metal/organic hybrid nanomaterials and LDI-MS substrates

A strategy for the on-surface synthesis of silver nanoparticles (AgNPs) on a variety of two- to three-dimensional material surfaces, utilizing polydopamine, an emerging surface modifying agent, is reported in this paper. This material-independent platform for AgNP synthesis is useful for fabricating organic/inorganic hybrid nanomaterials and for preparing substrates for laser desorption-ionization time-of-flight mass spectrometry (LDI-ToF MS).