Nonenzymatic electrochemical detection of glucose using well-distributed nickel nanoparticles on straight multi-walled carbon nanotubes

Highly dispersed noble metal nanoparticle composites on biomass-derived carbon-based carriers: synthesis, characterization, and catalytic applications

Precious metal nanoparticles have been widely investigated due to their excellent activity shown in catalysis and sensing. However, how to prepare highly dispersed noble metal nanoparticles to improve the lifetime of catalysts and reduce the cost is still an urgent problem to be solved. In this study, a carbon-based carrier material was prepared by an expansion method and loaded with Pd or Ag nanoparticles on this carbon material to synthesize precious metal nanoparticle composites, which were characterized in detail. The results show that the nanoparticles prepared using this method exhibit superior dispersion. Under the synergistic effect of noble metal nanoparticles and porous carbon carriers, the composites exhibited excellent catalytic degradation of p-nitrophenol and showed excellent sensing performance in the modified hydrogen peroxide sensor electrode. This approach is highly informative for the preparation of nanocomposites in medical and environmental fields.

Toward an Improved Electrocatalytic Determination of Immunomodulator COVID Medication Baricitinib Using Multiwalled Carbon Nanotube Nickel Hybrid

The study presents a first electrochemical method for the determination of the immunomodulator drug Baricitinib (BARI), crucial in managing COVID-19 patients requiring oxygen support. A unique electrode was developed by modifying graphite carbon nickel nanoparticles (NiNPs) with functionalized multiwalled carbon nanotubes (f.MWCNTs), resulting in nanohybrids tailored for highly sensitive BARI detection. Comparative analysis revealed the superior electrocatalytic performance of the nanohybrid-modified electrode over unmodified counterparts and other modifications, attributed to synergistic interactions between f.MWCNTs and nickel nanoparticles. Under optimized conditions, the sensors exhibited linear detection within a concentration range from 4.00 × 10-8 to 5.56 × 10-5 M, with a remarkably low detection limit of 9.65 × 10-9 M. Notably, the modified electrode displayed minimal interference from common substances and demonstrated high precision in detecting BARI in plasma and medicinal formulations, underscoring its clinical relevance and potential impact on COVID-19 treatment strategies.

A portable sensor for glucose detection in Huangshui based on blossom-shaped bimetallic organic framework loaded with silver nanoparticles combined with machine learning

In this work, we propose a blossom-like Ni, Co bimetallic metal-organic framework (NiCo-MOF) synthesized hydrothermally and decorated with silver nanoparticles (AgNPs) via chemical reduction for electrochemical enzyme-free glucose sensing. The NiCo-MOF nanostructures had large specific surface area and good sensing performance. The AgNPs enhanced the electrochemical performance of the MOF, resulting in excellent electrochemical activity. The sensor exhibited sensitivities of 1191.84 and 271.19 μA mM-1 cm-2 in the linear ranges of 0.005-1.125 and 1.525-5.325 mM, respectively, with a detection limit of 2.3 μM. The sensor was successfully applied for glucose determination in Huangshui (HS) using an artificial neural network as machine learning (ML) model. The R2 value near 1, low RMSE, and high RPD values of the proposed ML model demonstrate its excellent fitting and prediction performance. This will provide a fast and portable intelligent sensing analysis technology for the detection of glucose in HS.

A new formulation of Ni/Zn bi-metallic nanocomposite and evaluation of its applications for pollution removal, photocatalytic, electrochemical sensing, and anti-breast cancer

Nanocomposites have gained attention due to their variety of applications in different fields. In this research, we have reported a green synthesis of a bi-metallic nanocomposite of nickel and zinc using an aqueous extract of Citrus sinensis in the presence of chitosan (Ni/Zn@orange/chitosan). The nanocomposite was characterized using different techniques. We have examined various applications for Ni/Zn@orange/chitosan. The NPs were manufactured in spherical morphology with a particle range size of 17.34-90.51 nm. Ni/Zn@orange/chitosan showed an acceptable ability to remove dyes of Congo red and methyl orange from an aqueous solution after 80 min furthermore, it uptaking the drug mefenamic acid from a solution. Ni/Zn@orange/chitosan also exhibited great photocatalytic activity in synthesizing benzimidazole using benzyl alcohol and o-phenylenediamine. Ni/Zn@orange/chitosan was found as a potent electrochemical sensor to determine glucose. In the molecular and cellular section of the current research, the cells with composite nanoparticles were studied by MTT way about the anti-breast adenocarcinoma potentials malignant cell lines. The IC50 of composite nanoparticles were 320, 460, 328, 500, 325, 379, 350, and 396 μg/mL concering RBA, NMU, SK-BR-3, CAMA-1, MCF7, AU565, MDA-MB-468, and Hs 281.T breast adenocarcinoma cell lines, respectively. The results revealed the newly synthesized nanocomposite is a potent photocatalyst, dye pollution removal agent, and an acceptable new drug to treat breast cancer.

Partially Oxidized Carbon Nanomaterials with Ni/NiO Heterostructures as Durable Glucose Sensors

Conventional enzyme-based glucose biosensors have limited extensive applications in daily life because glucose oxidase is easily inactivated and is expensive. In this paper, we propose a strategy to prepare a new type of cost-effective, efficient, and robust nonenzymatic Ni-CNT-O for electrochemical glucose sensing. It is first followed by the pyrolysis of Ni-ABDC nanostrips using melamine to grow carbon nanotubes (CNTs) to give an intermediate product of Ni-CNT, which is further accompanied by partial oxidation to enable the facile formation of hierarchical carbon nanomaterials with improved hydrophilicity. A series of physicochemical characterizations have fully proved that Ni-CNT-O is a carbon-coated heterostructure of Ni and NiO nanoparticles embedded into coordination polymer-derived porous carbons. The obtained Ni-CNT-O exhibits a better electrocatalytic activity for glucose oxidation stemming from the synergistic effect of a metal element and a metal oxide than unoxidized Ni-CNT, which also shows high performance with a wide linear range from 1 to 3000 μM. It also offers a high sensitivity of 79.4 μA mM^-1 cm^-2, a low detection limit of 500 nM (S/N = 3), and a satisfactory long-term durability. Finally, this glucose sensor exhibits good reproducibility, high selectivity, as well as satisfactory results by comparing the current response of simulated serum within egg albumen.

Synthesis, Characterization, and Electrochemical Evaluation of Copper Sulfide Nanoparticles and Their Application for Non-Enzymatic Glucose Detection in Blood Samples

Glutathione-capped copper sulfide (CuxSy) nanoparticles with two different average sizes were successfully achieved by using a simple reduction process that involves only changing the reaction temperature. Temperature-induced changes in the size of CuxSy nanoparticles resulted in particles with different optical, morphological, and electrochemical properties. The dependence of electrochemical sensing properties on the sizes of CuxSy nanoparticles was studied by using voltammetric and amperometric techniques. The spherical CuxSy nanoparticles with the average particle size of 25 ± 0.6 nm were found to be highly conductive as compared to CuxSy nanoparticles with the average particle size of 4.5 ± 0.2 nm. The spherical CuxSy nanoparticles exhibited a low bandgap energy (Eg) of 1.87 eV, resulting in superior electrochemical properties and improved electron transfer during glucose detection. The sensor showed a very good electrocatalytic activity toward glucose molecules in the presence of interference species such as uric acid (UA), ascorbic acid (AA), fructose, sodium chloride, and sucrose. These species are often present in low concentrations in the blood. The sensor demonstrated an excellent dynamic linear range between 0.2 to 16 mM, detection limit of 0.2 mM, and sensitivity of 0.013 mA/mM. The applicability of the developed sensor for real field determination of glucose was demonstrated by use of spiked blood samples, which confirmed that the developed sensor had great potential for real analysis of blood glucose levels.

Study on SAW Methane Sensor Based on Cryptophane-A Composite Film

Surface Acoustic Wave (SAW) methane-sensing technology is a new way to detect methane at room temperature. However, the material and structure of the sensitive film are the important factors affecting the detection performance of the sensor. In this paper-with a SAW methane sensor using graphene-nickel cavitation-a composite film is proposed, which can work at room temperature. A delay linear dual-channel differential oscillator with center frequency of 204.3 MHz and insertion loss of -5.658 dB was designed; Cryptophane-A material was prepared by the "three-step method". The composite sensitive film was synthesized by a drop coating method, electrochemical deposition method and electroplating method. The composite film was characterized by SEM. The sensor performance test system and gas sensitivity test system were constructed to determine the response performance of the sensor at concentrations of 0~5% CH₄. The results showed that the sensor had a good response recovery performance in the test concentration range, and the frequency offset was positively correlated with methane concentration. The 90% average response time and recovery times were 41.2 s and 57 s, respectively. The sensor sensitivity was 809.4 ± 6.93 Hz/(1% CH₄). This study provides a good theoretical basis for the development of surface acoustic-wave methane sensors.

A sensitive, fast, selective, and reusable enzyme-free glucose sensor based on monodisperse AuNi alloy nanoparticles on activated carbon support

In this study, a glucose sensor modified with activated carbon supported gold-nickel (AuNi@AC) metal nanoparticles was prepared for the early diagnosis of diabetes. Electrochemical tests were carried out by determining the optimum working conditions of the prepared glucose sensor. The characterization analyses of the designed glucose sensor were performed by Transmission Electron Microscopy (TEM), X-Ray Diffraction (XRD), X-Ray Photoelectron Spectroscopy (XPS) and Raman Spectroscopy. It was determined that the average particle size of the nanoparticles in the AuNi alloy structure was 2.03 ± 0.37 nm. The determined detection limit of the AuNi@AC nanosensor was calculated as 0.41 μM as a result of the high linear range provided up to 1.7 mM. In addition, the sensitivity of AuNi@AC nanosensor to glucose, which has a high sensitivity value of 1955 μA mM^-1 cm^-2, was determined.

Fabrication of Polyaniline Ni-Complex Catalytic Electrode by Plasma Deposition for Electrochemical Detection of Phosphate through Glucose Redox Reaction as Mediator

We report here the preparation and characterization of polyaniline Ni-complex catalytic electrode by one-pot plasma deposition for the electrochemical detection of phosphate via the redox reaction of glucose. We first prepared a precursory solution by combining NiCl2 and 3-aminobenzoic acid in a mixed solution of methanol (MeOH) and water, and adding aniline as a conductive polymeric precursor for increasing the electron transfer potential. We then synthesized the catalytic electrode in a one-step cold plasma process by preparing the precursors on ITO glass. We characterized the obtained Ni-coordinate catalytic electrode via X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (SEM), and electrochemical methods. Electrochemical characterization produced stable redox properties of Ni3+/Ni2+ couples in a 0.1 M NaOH solution. Cyclic voltametric experiments have drastically increased electrocatalytic oxidation and reduction of glucose by increasing the concentration of phosphate (PO43−) ions using the prepared Ni-modified catalytic electrodes. From these results, the prepared catalytic electrode could be used as the electrochemical sensor for phosphate in actual water.

Non-enzymatic electrochemical detection of glucose using Ni-Cu bimetallic alloy nanoparticles loaded on reduced graphene oxide through a one-step synthesis strategy

In this work, Ni-Cu bimetallic alloy nanoparticles supported on reduced graphene oxide (Ni-Cu ANPs/RGO) was successfully fabricated through a one-step hydrothermal synthesis method, where simultaneous reduction of graphene oxide, nickel salt and copper salt was performed, and relevant characterization studies were executed. This synthetic method does not require surfactants and high temperature treatment, and is recommended as a green, convenient and effective way to produce composites. The unique two-dimensional architecture of the RGO provides a large specific surface area, contributing to loading more Ni-Cu ANPs, while the uniformly distributed Ni-Cu bimetallic alloy nanoparticles enhance the electrocatalytic performance of glucose oxidation. The non-enzymatic glucose biosensor based on Ni-Cu ANPs/RGO showed a wide linear range (from 0.01 μM to 30 μM), low detection limit (0.005 μM), and excellent sensitivity (1754.72 μA mM^-1 cm^-2). More importantly, the high reliability and the excellent selectivity in actual sample detection will broaden its practical application in electrochemical sensing.

Laser-Assisted Surface Modification of Ni Microstructures with Au and Pt toward Cell Biocompatibility and High Enzyme-Free Glucose Sensing

We investigated the influence of morphology of Ni microstructures modified with Au and Pt on their cell biocompatibility and electrocatalytic activity toward non-enzymatic glucose detection. Synthesis and modification were carried out using a simple and inexpensive approach based on the method of laser-induced deposition of metal microstructures from a solution on the surface of various dielectrics. Morphological analysis of the fabricated materials demonstrated that the surface of the Ni electrode has a hierarchical structure with large-scale 10 μm pores and small-scale 10 nm irregularities. In turn, the Ni-Pt surface has large-scale cavities, small-scale pores (1-1.5 μm), and a few tens of nanometer particles opposite to Ni-Au that reveals no obvious hierarchical structure. These observations were supported by impedance spectroscopy confirming the hierarchy of the surface topography of Ni and Ni-Pt structures. We tested the biocompatibility of the fabricated Ni-based electrodes with the HeLa cells. It was shown that the Ni-Au electrode has a much better cell adhesion than Ni-Pt with a more complex morphology. On the contrary, porous Ni and Ni-Pt electrodes with a more developed surface area than that of Ni-Au have better catalytic performance toward enzymeless glucose sensing, revealing greater sensitivity, selectivity, and stability. In this regard, modification of Ni with Pt led to the most prominent results providing rather good glucose detection limits (0.14 and 0.19 μA) and linear ranges (10-300 and 300-1500 μA) as well as the highest sensitivities of 18,570 and 2929 μA mM^-1 cm^-2. We also proposed some ideas to clarify the observed behavior and explain the influence of morphology of the fabricated electrodes on their electrocatalytic activity and biocompatibility.

Developments of the Electroactive Materials for Non-Enzymatic Glucose Sensing and Their Mechanisms

A comprehensive review of the electroactive materials for non-enzymatic glucose sensing and sensing devices has been performed in this work. A general introduction for glucose sensing, a facile electrochemical technique for glucose detection, and explanations of fundamental mechanisms for the electro-oxidation of glucose via the electrochemical technique are conducted. The glucose sensing materials are classified into five major systems: (1) mono-metallic materials, (2) bi-metallic materials, (3) metallic-oxide compounds, (4) metallic-hydroxide materials, and (5) metal-metal derivatives. The performances of various systems within this decade have been compared and explained in terms of sensitivity, linear regime, the limit of detection (LOD), and detection potentials. Some promising materials and practicable methodologies for the further developments of glucose sensors have been proposed. Firstly, the atomic deposition of alloys is expected to enhance the selectivity, which is considered to be lacking in non-enzymatic glucose sensing. Secondly, by using the modification of the hydrophilicity of the metallic-oxides, a promoted current response from the electro-oxidation of glucose is expected. Lastly, by taking the advantage of the redistribution phenomenon of the oxide particles, the usage of the noble metals is foreseen to be reduced.

Development of ESAT-6 Based Immunosensor for the Detection of Mycobacterium tuberculosis

Early secreted antigenic target of 6 kDa (ESAT-6) has recently been identified as a biomarker for the rapid diagnosis of tuberculosis. We propose a stable and reusable immunosensor for the early diagnosis of tuberculosis based on the detection and quantification of ESAT-6 via cyclic voltammetry (CV). The immunosensor was synthesized by polymerizing aniline dispersed with the reduced graphene oxide (rGO) and Ni nanoparticles, followed by surface modification of the electroconductive polyaniline (PANI) film with anti-ESAT-6 antibody. Physicochemical characterization of the prepared materials was performed by several analytical techniques, including FE-SEM, EDX, XRD, FT-IR, Raman, TGA, TPR, and BET surface area analysis. The antibody-modified Ni-rGO-PANI electrode exhibited an approximately linear response (R2 = 0.988) towards ESAT-6 during CV measurements over the potential range of -1 to +1 V. The lower detection limit for ESAT-6 was approximately 1.0 ng mL-1. The novelty of this study includes the development of the reusable Ni-rGO-PANI-based electrochemical immunosensor for the early diagnosis of tuberculosis. Furthermore, this study successfully demonstrates that electro-conductive PANI may be used as a polymeric substrate for Ni nanoparticles and rGO.

Copper and Nickel Microsensors Produced by Selective Laser Reductive Sintering for Non-Enzymatic Glucose Detection

In this work, the method of selective laser reductive sintering was used to fabricate the sensor-active copper and nickel microstructures on the surface of glass-ceramics suitable for non-enzymatic detection of glucose. The calculated sensitivities for these microsensors are 1110 and 2080 μA mM⁻¹·cm⁻² for copper and nickel, respectively. Linear regime of enzymeless glucose sensing is provided between 0.003 and 3 mM for copper and between 0.01 and 3 mM for nickel. Limits of glucose detection for these manufactured micropatterns are equal to 0.91 and 2.1 µM for copper and nickel, respectively. In addition, the fabricated materials demonstrate rather good selectivity, long-term stability and reproducibility.

A longitudinally expanded Ni-based metal-organic framework with enhanced double nickel cation catalysis reaction channels for a non-enzymatic sweat glucose biosensor

Nickel-based metal-organic frameworks (Ni-MOFs) have attracted increasing attention in non-enzymatic glucose sensing. However, the insufficient active Ni cation sites from a stacked MOF layer, the unclear Ni catalysis mechanism, and the severe liquid alkaline electrolyte remain challenging for practical applications. In this work, the sonication-induced longitudinal-expansion of Ni-MOFs increases the active nickel ion sites, which not only enhances the current response to glucose detection, but also shows the oxidation peak evolution of nickel ions with different sonication times, revealing the mechanism of different glucose detection channels. The Ni-MOF sonicated for 60 min (60 min Ni-MOF) displays enhanced Ni(iii)/Ni(ii) and more significant Ni(iv)/Ni(iii) double nickel cation channels for catalyzing glucose into glucolactone compared to the 0 min Ni-MOF (without sonication), showing optimized glucose detection ability with a high sensitivity of 3297.10 μA mM-1 cm-2, a low detection limit of ∼8.97 μM (signal-to-noise = 3) and a wide linear response range from 10 to 400 μM from the cyclic voltammetry test as well as a high sensitivity of 3.03 μA mM-1 cm-2, a low detection limit of ∼1.16 μM (signal-to-noise = 3) and a wide linear response range from 10 to 2000 μM from the chronoamperometry test. More importantly, an all-solid-state glucose biosensor using a PVA/NaOH solid-state electrolyte and a disposable 60 min Ni-MOF working electrode is assembled for non-enzymatic sweat glucose detection.

Printable 3D Carbon Nanofiber Networks with Embedded Metal Nanocatalysts

Carbon nanofiber (CNF) nanocatalyst hybrids hold great promise in fields such as energy storage, synthetic chemistry, and sensors. Current strategies to generate such hybrids are laborious and utterly incompatible with miniaturization and large-scale production. Instead, this work demonstrates that Ni nanoparticles embedded in three-dimensional (3D) CNFs of any shape and design can be easily prepared using electrospinning, followed by laser carbonization under ambient conditions. Specifically, a solution of nickel acetylacetonate /polyimide is electrospun and subsequently a design is printed via CO₂ laser (Ni-laser-induced carbon nanofiber (LCNFs)). This creates uniformly distributed small Ni nanoparticles (∼8 nm) very tightly adhered to the CNF network. Morphological and performance characteristics can be directly influenced by metal content and lasing power and hence adapted for the desired application. Here, Ni-LCNFs are optimized for nonenzymatic electrochemical sensing of glucose with great sensitivity of 2092 μA mM^-1 cm^-2 and a detection limit down to 0.3 μM. Its selectivity for glucose vs interfering species (ascorbic and uric acid) is essentially governed by the Ni content. Most importantly, this strategy can be adapted to a whole range of metal precursors and hence provide opportunities for such 3D CNF-nanocatalyst hybrids in point-of-care applications where high-performance but also sustainable and low-cost fabrications are of utmost importance.

Facile and scalable fabrication of nanostructured nickel thin film electrodes for electrochemical detection of formaldehyde

Fluorine doped tin oxide (FTO) substrates were deposited with thin metallic nickel films, having distinguishable surface morphologies, via a rapid, facile, and scalable approach i.e., aerosol assisted chemical vapor deposition (AACVD). The growth patterns of the nickel deposits were studied, showing a coalescing behavior as a function of the deposition time in a hierarchical fashion. These studies were followed by electrochemical measurements to design an efficient sensor for formaldehyde detection. The electrochemical responses were correlated with the surface characteristics of the films, whereas the optimized parameters were subjected to the evaluation of sensing performances. The developed sensor demonstrated a detection limit of 8.3 × 10^-6 M and a sensitivity of 0.18 A M^-1 within a linear range of 0-6.5 mM. Further, the sensor showed a response time of less than 5 s, selectivity against similar concentrations of methanol and formaldehyde, and recovery of ∼102% in a spiked fruit juice sample. Finally, the commercial viability of the fabrication procedure is tested using batch production analysis, and the high reproducibility of the data shows a promising future in mass production. It is envisaged that such low-cost fabrication procedures can be converted into many useful applications in the future.

Achieving Nonenzymatic Blood Glucose Sensing by Uprooting Saturation

The saturation of nonenzymatic blood glucose sensors at lower than normal blood glucose levels has blocked their practical applications. The mechanistic understanding of the saturation, however, has long been under debate. Employing cyclic voltammetry, amperometry, and FTIR with various electrolytes of varying concentrations, we were able to uproot the saturation cause. It was found to be related to the hydroxide ion concentration, which must be 11 times greater than that of the glucose concentration, contrary to the prior understanding. Together with the satisfactory sensitivity at high pH, nonenzymatic blood glucose sensing has finally been achieved, eliminating the usual problem of electrochemical current saturation as well as the need for enzyme found in the present technology.

Green preparation of core-shell Cu@Pd nanoparticles with chitosan for glucose detection

Although core-shell structure is favored by many applications, preparing it with green way is rarely been reported. Herein, a core-shell structured Cu@Pd-CS nanocomposite is greenly fabricated utilizing a natural chitosan and applied to glucose detection. As-obtained Cu@Pd-CS nanoparticles were characterized by transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and powder X-ray diffraction (XRD). When applied to glucose detection, the Cu@Pd-CS exhibits good stability, sensitivity and anti-interference. Moreover, it has a good linear relationship in glucose concentrations range of 0.1-1 mM with the sensitivity of 1.53 μA mM^-1 cm^-2 and 1-10 mM with the sensitivity of 23.00 μA mM^-1 cm^-2. This work proves the practicability of building metal-based core-shell structure nanoparticles with green resources and glucose detection application.

Electrodeposition of nickel nanostructures using silica nanochannels as confinement for low-fouling enzyme-free glucose detection

This work reports an enzyme-free glucose sensor based on nickel nanostructures electrodeposited on a fluorine-doped tin oxide (FTO) electrode modified with a silica nanochannel membrane (SNM).

Electrochemical non-enzymatic glucose sensors: recent progress and perspectives

This review summarizes recent advances in the development of electrocatalysts for non-enzymatic glucose detection. The sensing mechanism and influencing factors are discussed, and the perspectives and challenges are also addressed.

Hierarchical core-shell structured Ni3S2/NiMoO4 nanowires: a high-performance and reusable electrochemical sensor for glucose detection

Designing highly active electrode is important for the fabrication of electrochemical sensing platforms, and core-shell nanostructures with large specific surface areas and ease of accessibility are effective probes for the detection of biomolecules. In this work, we report the development of hierarchical core-shell Ni3S2/NiMoO4 nanowires on a nickel foam substrate (Ni-Ni3S2/NiMoO4) as a non-noble metal catalyst electrode for the electrochemical oxidation of glucose in alkaline electrolyte. As an electrochemical sensor for glucose detection, the fabricated hierarchical Ni-Ni3S2/NiMoO4 core-shell nanowires display an enhanced catalytic response, a fast response time of 1 s with a limit of detection (LOD) of 0.055 μM (S/N = 3), and a higher sensitivity of 10.49 μA μM-1 cm-2. Unlike Ni3S2 or NiMoO4 electrodes, the observed superior catalytic activity towards glucose is mainly due to the promotional effect of NiMoO4 nanosheets on the Ni3S2 nanowires, which can increase the large active surface area and generate numerous active sites within and on the surface walls of the nanowire structures. The developed Ni-Ni3S2/NiMoO4 nanowire electrode can selectively detect glucose in the presence of other carbohydrates, such as fructose, sucrose, lactose, maltose, galactose, mannose, and xylose, indicating potential anti-interference properties. The Ni-Ni3S2/NiMoO4 nanowire electrode is highly stable for reuse and its practical application is demonstrated using real blood serum samples. These results demonstrate that hierarchical core-shell Ni3S2/NiMoO4 nanowires show potential for application in the development of low-cost applied glucose sensors.

Single-Step Formation of Ni Nanoparticle-Modified Graphene-Diamond Hybrid Electrodes for Electrochemical Glucose Detection

The development of accurate, reliable devices for glucose detection has drawn much attention from the scientific community over the past few years. Here, we report a single-step method to fabricate Ni nanoparticle-modified graphene–diamond hybrid electrodes via a catalytic thermal treatment, by which the graphene layers are directly grown on the diamond surface using Ni thin film as a catalyst, meanwhile, Ni nanoparticles are formed in situ on the graphene surface due to dewetting behavior. The good interface between the Ni nanoparticles and the graphene guarantees efficient charge transfer during electrochemical detection. The fabricated electrodes exhibit good glucose sensing performance with a low detection limit of 2 μM and a linear detection range between 2 μM–1 mM. In addition, this sensor shows great selectivity, suggesting potential applications for sensitive and accurate monitoring of glucose in human blood.

Microwave-assisted synthesis of Pd3Ag nanocomposite via nature polysaccharide applied to glucose detection

In this work, a green strategy is performed to fabricate Pd₃Ag nanoparticles (NPs) using plant-extracted polysaccharide (Lilium brownie polysaccharide, LBP). As-obtained Pd₃Ag nanocomposite (Pd₃Ag-LBP/C) is surveyed including transmission election microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and powder X-ray diffraction (XRD). The result of glucose detection application shows that the Pd₃Ag-LBP/C glassy carbon electrode (GCE) exhibits good stability and sensitivity. It can completely cover the normal blood glucose concentration (3-8 mM) with high sensitivity of 77.20 μA mM^-1 cm^-2. This work undoubtedly has positive effects on green synthesis development. It not only proves the practicability of building nanomaterials by polysaccharide, but also offers an environmentally friendly way for fabricating other nanomaterials.

Recent advances in electrochemical non-enzymatic glucose sensors - A review

This review encompasses the mechanisms of electrochemical glucose detection and recent advances in non-enzymatic glucose sensors based on a variety of materials ranging from platinum, gold, metal alloys/adatom, non-precious transition metal/metal oxides to glucose-specific organic materials. It shows that the discovery of new materials based on unique nanostructures have not only provided the detailed insight into non-enzymatic glucose oxidation, but also demonstrated the possibility of direct detection in whole blood or interstitial fluids. We critically evaluate various aspects of non-enzymatic electrochemical glucose sensors in terms of significance as well as performance. Beyond laboratory tests, the prospect of commercialization of non-enzymatic glucose sensors is discussed.

Three-Dimensional Porous Nickel Frameworks Anchored with Cross-Linked Ni(OH)2 Nanosheets as a Highly Sensitive Nonenzymatic Glucose Sensor

A facile and scalable in situ microelectrolysis nanofabrication technique is developed for preparing cross-linked Ni(OH)₂ nanosheets on a novel three-dimensional porous nickel template (Ni(OH)₂@3DPN). For the constructed template, the porogen of NaCl particles not only induces a self-limiting surficial hot corrosion to claim the "start engine stop" mechanism but also serves as the primary battery electrolyte to greatly accelerate the growth of Ni(OH)₂. As far as we know, the microelectrolysis nanofabrication is superior to the other reported Ni(OH)₂ synthesis methods due to the mild condition (60 °C, 6 h, NaCl solution, ambient environment) and without any post-treatment. The integrated Ni(OH)₂@3DPN electrode with a highly suitable microstructure and a porous architecture implies a potential application in electrochemistry. As a proof-of-concept demonstration, the electrode was employed for nonenzymatic glucose sensing, which exhibits an outstanding sensitivity of 2761.6 μA mM^-1 cm^-2 ranging from 0.46 to 2100 μM, a fast response, and a low detection limit. The microelectrolysis nanofabrication is a one-step, binder-free, entirely green, and therefore it has a distinct advantage to improve clean production and reduce energy consumption.

Comparative analysis of single-walled and multi-walled carbon nanotubes for electrochemical sensing of glucose on gold printed circuit boards

In the present work, a comparative study was performed between single-walled carbon nanotubes and multi-walled carbon nanotubes coated gold printed circuit board electrodes for glucose detection. Various characterization techniques were demonstrated in order to compare the modified electrodes viz. cyclic voltammetry, electrochemical impedance spectroscopy and chrono-amperometry. Results revealed that single-walled carbon nanotubes outperformed multi-walled carbon nanotubes and proved to be a better sensing interface for glucose detection. The single-walled carbon nanotubes coated gold printed circuit board electrodes showed a wide linear sensing range (1 mM to 100 mM) with detection limit of 0.1 mM with response time of 5 s while multi-walled carbon nanotubes coated printed circuit board gold electrodes showed linear sensing range (1 mM to 100 mM) with detection limit of 0.1 mM with response time of 5 s. This work provided low cost sensors with enhanced sensitivity, fast response time and reliable results for glucose detection which increased the affordability of such tests in remote areas. In addition, the comparative results confirmed that single-walled carbon nanotubes modified electrodes can be exploited for better amplification signal as compared to multi-walled carbon nanotubes.

Synthesis of a novel Au nanoparticles decorated Ni-MOF/Ni/NiO nanocomposite and electrocatalytic performance for the detection of glucose in human serum

A nonenzymatic glucose electrochemical sensor was constructed based on Au nanoparticles (AuNPs) decorated Ni metal-organic-framework (MOF)/Ni/NiO nanocomposite. Ni-MOF/Ni/NiO nanocomposite was synthesized by one-step calcination of Ni-MOF. Then AuNPs were loaded onto the Ni-based nanocomposites' surface through electrostatic adsorption. Through characterization by transmission electron microscopy (TEM), high resolution TEM (HRTEM) and energy disperse spectroscopy (EDS) mapping, it is found that the AuNPs were well distributed on the surface of Ni-based nanocomposite. Cyclic voltammetric (CV) study showed the electrocatalytic activity of Au-Ni nanocomposite was highly improved after loading AuNPs onto it. Amperometric study demonstrated that the Au-Ni nanocomposites modified glassy carbon electrode (GCE) exhibited a high sensitivity of 2133.5 mA M^-1 cm^-2 and a wide linear range (0.4-900 μM) toward the oxidation of glucose with a detection limit as low as 0.1 μM. Moreover, the reproducibility, selectivity and stability of the sensor all exhibited outstanding performance. We applied the as-fabricated high performance sensor to measure the glucose levels in human serum and obtained satisfactory results. It is believed that AuNPs decorated Ni MOF/Ni/NiO nanocomposite provides a new platform for developing highly performance electrochemical sensors in practical applications.