Multi-wall carbon nanotube-polyaniline biosensor based on lectin–carbohydrate affinity for ultrasensitive detection of Con A

Recent Insights into Glucose-Responsive Concanavalin A-Based Smart Hydrogels for Controlled Insulin Delivery

Many efforts are continuously undertaken to develop glucose-sensitive biomaterials able of controlling glucose levels in the body and self-regulating insulin delivery. Hydrogels that swell or shrink as a function of the environmental free glucose content are suitable systems for monitoring blood glucose, delivering insulin doses adapted to the glucose concentration. In this context, the development of sensors based on reversible binding to glucose molecules represents a continuous challenge. Concanavalin A (Con A) is a bioactive protein isolated from sword bean plants (Canavalia ensiformis) and contains four sugar-binding sites. The high affinity for reversibly and specifically binding glucose and mannose makes Con A as a suitable natural receptor for the development of smart glucose-responsive materials. During the last few years, Con A was used to develop smart materials, such as hydrogels, microgels, nanoparticles and films, for producing glucose biosensors or drug delivery devices. This review is focused on Con A-based materials suitable in the diagnosis and therapeutics of diabetes. A brief outlook on glucose-derived theranostics of cancer is also presented.

Capacitive biosensors for label-free and ultrasensitive detection of biomarkers

Capacitive biosensors are label-free capacitors that can detect biomarkers with the outstanding advantages of simplicity, low cost, and ultrahigh sensitivity. A typical capacitive biosensor consists of a bioreceptor and a transducer, where the bioreceptor captures the biomarker to form a bioreceptor/biomarker conjugate and the transducer generates a detectable signal. In general, antibodies, aptamers, or proteins are exploited as the bioreceptor, while various electrodes including carbon electrodes (CEs), gold electrodes (AuEs), or interdigitated electrodes (IDEs) may serve as the transducer. Because the formation of bioreceptor/biomarker conjugates often leads to a change in capacitance, the capacitive signal is then employed for biomarker detection. This review summarizes recent advances in capacitive biosensors for the detection of biomarkers over the last five years. With a focus on the three common types of bioreceptors, i.e., antibodies, aptamers, and proteins, capacitive biosensors using CEs, AuEs, and IDEs as the transducers are discussed in detail. The immobilization of bioreceptors and signal amplification strategies are described to provide a robust overview of capacitive biosensors for biomarker detection. In addition, analytical methods and future prospects are given to support the application of capacitive biosensors.

Various types of electrochemical biosensors for leukemia detection and therapeutic approaches

Leukemia often initiates following dysfunctions in hematopoietic stem cells lineages. Various types of leukemia, including acute lymphoblastic leukemia (ALL), chronic myelogenous leukemia (CML), acute promyelocytic leukemia (APL), and human T-cell leukemia/lymphoma virus type 1 (HTLV-1) can thus call for different diagnosis and treatment options. One of the most important subjects in leukemia is the early detection of the disease for effective therapeutic purposes. In this respect, biosensors detecting the molecules of deoxyribonucleic acid (DNA) as analytes are called genosensors or DNA biosensors. Electrochemical sensors, as the most significant approach, also involve reacting of chemical solutions with sensors to generate electrical signals proportional to analyte concentrations. Biosensors can further help detect cancer cells in the early stages of the disease. Moreover, electrochemical biosensors, developed based on various nanomaterials (NMs), can increase sensitivity to the detection of leukemia-related genes, e.g., BCR/ABL as a fusion gene and promyelocytic leukemia/retinoic acid receptor alpha (PML/RARα). Therefore, the present review reflects on previous studies recruiting different NMs for leukemia detection.

Advances in Medical Wearable Biosensors: Design, Fabrication and Materials Strategies in Healthcare Monitoring

In the past decade, wearable biosensors have radically changed our outlook on contemporary medical healthcare monitoring systems. These smart, multiplexed devices allow us to quantify dynamic biological signals in real time through highly sensitive, miniaturized sensing platforms, thereby decentralizing the concept of regular clinical check-ups and diagnosis towards more versatile, remote, and personalized healthcare monitoring. This paradigm shift in healthcare delivery can be attributed to the development of nanomaterials and improvements made to non-invasive biosignal detection systems alongside integrated approaches for multifaceted data acquisition and interpretation. The discovery of new biomarkers and the use of bioaffinity recognition elements like aptamers and peptide arrays combined with the use of newly developed, flexible, and conductive materials that interact with skin surfaces has led to the widespread application of biosensors in the biomedical field. This review focuses on the recent advances made in wearable technology for remote healthcare monitoring. It classifies their development and application in terms of electrochemical, mechanical, and optical modes of transduction and type of material used and discusses the shortcomings accompanying their large-scale fabrication and commercialization. A brief note on the most widely used materials and their improvements in wearable sensor development is outlined along with instructions for the future of medical wearables.

A novel reduced graphene oxide/molybdenum disulfide/polyaniline nanocomposite-based electrochemical aptasensor for detection of aflatoxin B1

In this study, we developed a novel reduced graphene oxide/molybdenum disulfide/polyaniline@gold nanoparticles-based electrochemical aptasensor (termed as RGO/MoS2/PANI@AuNPs/Apt) for detection of aflatoxin B1 (AFB1). The RGO/MoS2/PANI nanocomposites were synthesized and characterized by multiple techniques, including scanning electron microscopy (SEM), transmission electron microscopy (TEM), infrared spectroscopy (FTIR), UV-visible spectroscopy, and X-ray photoelectron spectroscopy (XPS). A glassy carbon electrode (GCE) was then modified by the RGO/MoS2/PANI nanocomposites, coated with a chitosan (Cs) film, and followed by AuNPs attachment for immobilizing the AFB1 aptamers. In the presence of AFB1, the AFB1 binding-induced conformation change of the immobilized aptamer on the electrode surface results in the reduction of the electron transfer from a [Fe(CN)6]3-/4- redox couple in the solution to the GCE surface. Therefore, the aptamer-AFB1 binding event can be easily monitored by the peak current change of the RGO/MoS2/PANI@AuNPs/Apt through differential pulse voltammetry (DPV) measurement. Under the optimized conditions, the as-developed RGO/MoS2/PANI@AuNPs/Apt exhibits a wide linear range from 0.01 fg mL-1 to 1.0 fg mL-1 and a remarkably low detection limit (3σ) of 0.002 fg mL-1. The aptasensor also has good reproducibility as well as shows high selectivity against other fungal toxins, such as OTA and FB1. Moreover, the practicability of the RGO/MoS2/PANI@AuNPs/Apt was demonstrated by the analysis of AFB1 in the spiked wine samples.

Simultaneous quadruple-channel optical transduction of a nanosensor for multiplexed qualitative and quantitative analysis of lectins

A multichannel optical nanosensor capable of identifying and quantitating multiple lectins simultaneously was developed. The quadruple channel of fluorescence and scattering signals can be in situ collected from the same solution system, which offers high accuracy, discrimination resolution and measurement convenience. This nanosensor can in principle be generalized to the analysis of all lectins and saccharide binding organisms.

Glycoproteins functionalized natural and synthetic polymers for prospective biomedical applications: A review

Glycoproteins have multidimensional properties such as biodegradability, biocompatibility, non-toxicity, antimicrobial and adsorption properties; therefore, they have wide range of applications. They are blended with different polymers such as chitosan, carboxymethyl cellulose (CMC), polyvinyl pyrrolidone (PVP), polycaprolactone (PCL), heparin, polystyrene fluorescent nanoparticles (PS-NPs) and carboxyl pullulan (PC) to improve their properties like thermal stability, mechanical properties, resistance to pH, chemical stability and toughness. Considering the versatile charateristics of glycoprotein based polymers, this review sheds light on synthesis and characterization of blends and composites of glycoproteins, with natural and synthetic polymers and their potential applications in biomedical field such as drug delivery system, insulin delivery, antimicrobial wound dressing uses, targeting of cancer cells, development of anticancer vaccines, development of new biopolymers, glycoproteome research, food product and detection of dengue glycoproteins. All the technical scientific issues have been addressed; highlighting the recent advancement.

Glyconanomaterials for biosensing applications

Nanomaterials constitute a class of structures that have unique physiochemical properties and are excellent scaffolds for presenting carbohydrates, important biomolecules that mediate a wide variety of important biological events. The fabrication of carbohydrate-presenting nanomaterials, glyconanomaterials, is of high interest and utility, combining the features of nanoscale objects with biomolecular recognition. The structures can also produce strong multivalent effects, where the nanomaterial scaffold greatly enhances the relatively weak affinities of single carbohydrate ligands to the corresponding receptors, and effectively amplifies the carbohydrate-mediated interactions. Glyconanomaterials are thus an appealing platform for biosensing applications. In this review, we discuss the chemistry for conjugation of carbohydrates to nanomaterials, summarize strategies, and tabulate examples of applying glyconanomaterials in in vitro and in vivo sensing applications of proteins, microbes, and cells. The limitations and future perspectives of these emerging glyconanomaterials sensing systems are furthermore discussed.

Recent Progress in Lectin-Based Biosensors

This article reviews recent progress in the development of lectin-based biosensors used for the determination of glucose, pathogenic bacteria and toxins, cancer cells, and lectins. Lectin proteins have been widely used for the construction of optical and electrochemical biosensors by exploiting the specific binding affinity to carbohydrates. Among lectin proteins, concanavalin A (Con A) is most frequently used for this purpose as glucose- and mannose-selective lectin. Con A is useful for immobilizing enzymes including glucose oxidase (GOx) and horseradish peroxidase (HRP) on the surface of a solid support to construct glucose and hydrogen peroxide sensors, because these enzymes are covered with intrinsic hydrocarbon chains. Con A-modified electrodes can be used as biosensors sensitive to glucose, cancer cells, and pathogenic bacteria covered with hydrocarbon chains. The target substrates are selectively adsorbed to the surface of Con A-modified electrodes through strong affinity of Con A to hydrocarbon chains. A recent topic in the development of lectin-based biosensors is a successful use of nanomaterials, such as metal nanoparticles and carbon nanotubes, for amplifying output signals of the sensors. In addition, lectin-based biosensors are useful for studying glycan expression on living cells.

An efficient nanomaterial-based electrochemical biosensor for sensitive recognition of drug-resistant leukemia cells

A novel electrochemical cytosensor was developed for the fast and high-sensitivity recognition of drug-resistant leukemia K562/ADM cells based on the P-glycoprotein (P-gp) expression level on a cell membrane. The nanocomposite interface of the gold nanoparticles/polyaniline nanofibers (AuNPs/PANI-NF) was chosen to design the biosensor for electrochemical detection. Au/PANI-NF-based cytosensors coated with anti-P-glycoprotein (anti-P-gp) molecules could provide a biomimetic interface for the immunosensing of cell surface P-glycoprotein, and thus could capture the over-expression P-gp cells. Transmission electron microscopy (TEM) indicated that the gold nanoparticles were uniformly anchored along the structure of the PANI-NF surface, displaying fibrillar morphology with a diameter of ∼70 nm, and atomic force microscopy (AFM) further presented the morphology of the nanocomposite film. Owing to the high affinity of anti-P-gp for leukemia K562/ADM cells of the propounded sensing platform, the proposed biosensor exhibited excellent analytical performance for leukemia K562/ADM cells, ranging from 1.6 × 10(2) to 1.6 × 10(6) cells per mL with a detection limit of 80 cells per mL. Recovery experiments indicated that the sensitivity reported here is suitable for practical application. The cell surface P-gp expression level was analysed by flow cytometric experiments, which confirmed the above recognized result. This strategy is also a cost-effective and convenient operation, implying great promise for the sensitive recognition of cancer cells and cell surface receptors; thus, it is helpful in cancer diagnosis.

Shape-controlled ceria-reduced graphene oxide nanocomposites toward high-sensitive in situ detection of nitric oxide

Nitric oxide (NO) is an important signal molecule released by most cancer cells under drug stimulation or/and disease development but it is extremely challenging to in situ while real-time sensitively detect NO due to its large diffusivity, low concentration and fast decay. Herein, shape-controlled reduced graphene oxide nanocomposing with ceria (rGO-CeO2) was synthesized via hydrothermal reaction to construct a highly sensitive real-time sensing platform for NO detection. The crystal shape of CeO2 nanoparticles in rGO-CeO2 composites significantly affects the sensing performance of rGO-CeO2, of which the regular hexagonal nanocrystal CeO2 achieves the highest sensitivity (1676.06 mA cm(-2) M(-1)), a wide dynamic range (18.0 nM to 5.6 µM) and a low detection limit (9.6 nM). This attributes to a synergical effect from high catalytic activity of the specifically shaped CeO2 nanocrystal and good conductivity/high surface area of rGO. This work demonstrates a way by rationally compose individual merit components while well control the nanostructure for a superior synergistic effect to build a smart sensing platform, while offering a great application potential to sensitively real-time detect NO released from living cells for diagnosis or/and studies of complicated biological processes.

A signal-on electrochemiluminescence biosensor for detecting Con A using phenoxy dextran-graphite-like carbon nitride as signal probe

A novel signal-on electrochemiluminescence (ECL) biosensor for detecting concanavalin A (Con A) was fabricated with phenoxy dextran-graphite-like carbon nitride (DexP-g-C3N4) as signal probe. In this construction strategy, the nanocomposites of three-dimensional graphene and gold nanoparticles (3D-GR-AuNPs) were used as matrix for high loading of glucose oxidase (GOx), which served as recognition element for bounding Con A. Con A further interacted with DexP-g-C3N4 through a specific carbohydrate-Con A interaction to achieve a sandwiched scheme. With the increase of Con A incubated onto the electrode, the ECL signal resulted from DexP-g-C3N4 would enhance, thus achieving a signal-on ECL biosensor for Con A detection. Due to the integration of the virtues of 3D-GR-AuNPs and the excellent ECL performance of DexP-g-C3N4, the prepared biosensor exhibits a wide linear response range from 0.05 ng/mL to 100 ng/mL and a low detection limit of 17 pg/mL (S/N=3).

Square-wave voltammetry assays for glycoproteins on nanoporous gold

Electrochemical enzyme-linked lectinsorbent assays (ELLA) were developed using nanoporous gold (NPG) as a solid support for protein immobilization and as an electrode for the electrochemical determination of the product of the reaction between alkaline phosphatase (ALP) and p-aminophenyl phosphate (p-APP), which is p-aminophenol (p-AP). Glycoproteins or concanavalin A (Con A) and ALP conjugates were covalently immobilized onto lipoic acid self-assembled monolayers on NPG. The binding of Con A - ALP (or soybean agglutinin - ALP) conjugate to glycoproteins covalently immobilized on NPG and subsequent incubation with p-APP substrate was found to result in square-wave voltammograms whose peak difference current varied with the identity of the glycoprotein. NPG presenting covalently bound glycoproteins was used as the basis for a competitive electrochemical assay for glycoproteins in solution (transferrin and IgG). A kinetic ELLA based on steric hindrance of the enzyme-substrate reaction and hence reduced enzymatic reaction rate after glycoprotein binding is demonstrated using immobilized Con A-ALP conjugates. Using the immobilized Con A-ALP conjugate, the binding affinity of immunoglobulin G (IgG) was found to be 105 nM, and that for transferrin was found to be 650 nM. Minimal interference was observed in the presence of 5 mg mL-1 BSA as a model serum protein in both the kinetic and competitive ELLA. Inhibition studies were performed with methyl D-mannoside for the binding of TSF and IgG to Con A-ALP; IC50 values were found to be 90 μM and 286 μM, respectively. Surface coverages of proteins were estimated using solution depletion and the BCA protein concentration assay.

Electrochemical sensing of concanavalin A using a non-ionic surfactant with a maltose moiety

To electrochemically detect concanavalin A (ConA), a new method was developed using mixed micelles between a non-ionic surfactant with a maltose moiety and electroactive daunomycin. The surfactants, in which the length of the alkyl chain was different, were n-decyl-β-D-maltoside, n-dodecyl-β-D-maltoside, and n-tetradecyl-β-D-maltoside. The measurement principle was due to the micelle breakdown caused by the binding between the ConA and maltose moieties. When ConA was combined with maltose moieties at a concentration of surfactant that was near the critical micelle concentration, the daunomycin that formed the micelles was moved to a solution from the micelles. As a result, the peak current of daunomycin increased as the concentration of ConA was increased. The mechanism was proposed using voltammetry, spectrometry, and gel filtration. The linear range using n-tetradecyl-β-D-maltoside was 2.0×10(-9) to 8.0×10(-8) M of ConA, and it was the most sensitive in the presence of the three surfactants. To examine whether selective binding took place, measurements with several proteins were carried out. The electrode responses of daunomycin were not influenced by the presence of 5.0×10(-6) M protein. Furthermore, this method could be applied to the determination of ConA in a serum, and to the measurement of sugar chains that can be combined with ConA on the cell surface.

Synthesis of a Novel Polyaniline Glycopolymer and its Lectin Binding Studies

We report the multistep synthesis and polymerisation of a novel aniline derivative with a pendant α-d-mannose substituent. The α-D-mannose functionality was successfully introduced before polymerisation via copper-catalysed azide alkyne click chemistry and the resulting monomer was polymerised using general oxidative polymerisation conditions, producing a water soluble mannosylated polyaniline. The polymer was characterised by several techniques and compared with standard polyaniline. The selective binding of the polymer to Concanavalin A (ConA) was successfully demonstrated by the precipitation of polymer–ConA aggregates. Potential applications of these novel polyaniline glycopolymers could include the development of electroactive biomaterials with the ability to bind mannose receptors, or as sensors for proteins or microbes.

Electrogenerated poly(pyrrole-lactosyl) and poly(pyrrole-3'-sialyllactosyl) interfaces: toward the impedimetric detection of lectins

This paper reports on the impedimetric transduction of binding reaction between polymerized saccharides and target lectins. The controlled potential electro-oxidation of pyrrole-lactosyl and pyrrole-3'-sialyllactosyl at 0.95 V vs. Ag/AgCl, provides thin and reproducible poly(pyrrole-saccharide) films. The affinity binding of two lectins: Arachis hypogaea, (PNA) and Maackia amurensis (MAA) onto poly(pyrrole-lactosyl) and poly(pyrrole-3'-sialyllactosyl) electrodes, was demonstrated by cyclic voltammetry in presence of ruthenium hexamine and hydroquinone. In addition, rotating disk experiments were carried out to determine the permeability of both polypyrrole films and its evolution after incubating with lectin target. Finally, the possibility of using the poly(pyrrole-lactosyl) or poly(pyrrole-3'-siallyllactosyl) films for the impedimetric transduction of the lectin binding reaction, was investigated with hydroquinone (2 × 10(-3) mol L(-1)) as a redox probe in phosphate buffer. The resulting impedance spectra were interpreted and modeled as an equivalent circuit indicating that charge transfer resistance (R ct) and relaxation frequency (f°) parameters are sensitive to the lectin binding. R ct increases from 77 to 97 Ω cm(2) for PNA binding and from 93 to 131 Ω cm(2) for MAA binding. In parallel, f° decreases from 276 to 222 Hz for PNA binding and from 223 to 131 Hz for MAA binding. This evolution of both parameters reflects the steric hindrances generated by the immobilized lectins towards the permeation of the redox probe.

Glycosylated aniline polymer sensor: amine to imine conversion on protein-carbohydrate binding

In this report, functionalized mannosylated aniline polymer (manno-PANI) was investigated as an electrochemical platform to study carbohydrate-protein interactions by exploiting the conductivity change of manno-PANI when the specific lectin binding occurs. A systematic study was performed to characterize the interconversion of polyaniline content (from amine to imine) in manno-PANI by UV-vis spectroscopy during its binding with concanavalin A (Con A). Both X-ray photoelectron spectrometry (XPS) and UV-vis results suggest that Con A binding with the manno-PANI film triggers the switching of amine functionalities in the polyaniline backbone, converting them to imine forms. Electrochemical impedance spectroscopy (EIS) was used to quantify the specific interactions between Con A and mannose by measuring the impedance change of manno-PANI film for the detection of Con A. A linear relationship between the impedance and Con A concentration was obtained, and the detection limit reaches to 0.12 nM Con A in a buffer solution (pH=7.4), whereas the addition of nonspecific control lectins to the same manno-PANI film gave very little impedance variations. Stability characterization of the manno-PANI film over 20 weeks shows a maximum drift of only 3% from the original signal. Thus, the uniquely constructed carbohydrate-PANI hybrid is a promising new carbohydrate recognition moiety for studying carbohydrate-protein interactions, presumably leading to a new electrochemical method for characterization of carbohydrate-protein interactions and carbohydrate-mediated intercellular recognitions.

Electrical stimuli improve osteogenic differentiation mediated by aniline pentamer and PLGA nanocomposites

Electrical stimulation may improve the proliferation of animal cells. In the present study, osteoblasts were cultured on electroactive aniline pentamer (AP)/poly(lactic-co-glycolic acid) (PLGA) copolymer composites, on which electric pulse was imposed. The combination of polymer and electric pulse enhanced the osteogenic differentiation of the osteoblasts, characterized by the upregulated expression of bone morphogenetic protein (BMP)-2, collagen I and osteonectin and the phosphorylation of Samd4, in contrast to polymer or electrical pulse alone. This action occurred in a polymer content-dependent manner. Therefore, the action of the electric pulse, assisted by the electroactive polymer implant, may be promising in the expedition of injured bone repair.