Bimetallic AuPt nanochains: Synthesis and their application in electrochemical immunosensor for the detection of carcinoembryonic antigen

Coaxial dual-path electrochemical biosensing and logic strategy-based detection of lung cancer-derived exosomal PD-L1

Exosomal programmed death ligand-1 (ExoPD-L1) is a vital marker of immune activation in the early stages of tumor therapy and it can inhibit anti-tumor immune responses. However, due to the low expression of ExoPD-L1 in cancer cells, it is difficult to perform highly sensitive assays and accurately differentiate cancer sources. Therefore, we constructed a coaxial dual-path electrochemical biosensor for highly accurate identification and detection of ExoPD-L1 from lung cancer based on chemical-biological coaxial nanomaterials and nucleic acid molecular signal amplification strategies. The measurements showed that the detected ExoPD-L1 concentrations ranged from 6 × 102 particles per mL to 6 × 108 particles per mL, and the detection limit was 310 particles per mL. Compared to other sensors, the electrochemical biosensor designed in this study has a lower detection limit and a wider detection range. Furthermore, we also successfully identified lung cancer-derived ExoPD-L1 by analyzing multiple protein biomarkers expressed on exosomes through the "AND" logic strategy. This sensor platform is expected to realize highly sensitive detection and accurate analysis of multiple sources of ExoPD-L1 and provide ideas for the clinical detection of ExoPD-L1.

A biosensor based on graphene oxide nanocomposite for determination of carcinoembryonic antigen in colorectal cancer biomarker

Colorectal cancer is still a major global health concern, and early detection and accurate biomarker analyses are critical to its successful management. This paper describes the design and testing of a new biosensor based on a graphene oxide (GO) nanocomposite for the exact measurement of carcinoembryonic antigen (CEA), a well-known biomarker for colorectal cancer. The current study attempted to create a highly sensitive immunosensor for sensitive measurement of CEA based on a polypropylene-imine-dendrimer (PPI) and GO nanocomposite on GCE (PPI/GO/GCE). The PPI/GO nanocomposite served as an appropriate biocompatible nanostructure with a large surface area for immobilizing carcinoembryonic antigen (anti-CEA) and bovine serum albumin (BSA) molecules (BSA/anti-CEA/PPI/GO/GCE), thereby promoting the selectivity of electrochemical immunosensors, according to structural and electrochemical studies. Results showed that the BSA/anti-CEA/PPI/GO/GCE as a selective, sensitive, and stable immunosensor revealed a wide linear response from 0.001 to 2000 ng/mL, and a limit of detection of 0.3 pg/mL, which indicated comparable or better performance towards the CEA immunosensors in recent reports in the literature. This was due to the synergetic effect of the GO nanosheets and PPI with porous structure and more conductivity. Analytical results showed values of RSD (4.49%-5.04%) and recovery (90.00%-99.98%) are suitable for effective and accurate practical assessments in CEA in clinical samples. The capacity of the BSA/anti-CEA/PPI/GO/GCE to determine CEA in human blood was studied.

Highly Sensitive Immunosensing of Carcinoembryonic Antigen Based on Gold Nanoparticles Dotted PB@PANI Core-Shell Nanocubes as a Signal Probe

Herein, a method was developed for the sensitive monitoring of carcinoembryonic antigen (CEA) by gold nanoparticles dotted prussian blue@polyaniline core-shell nanocubes (Au NPs/PB@PANI). First, a facile low-temperature method was used to prepare the uniform PB@PANI core-shell nanocubes with the assistance of PVP, where PB acted as the electron transfer mediator to provide electrochemical signals, and the PANI with excellent conductivity and desirable chemical stability not only played the role of a protective layer to prevent etching of PB in basic media but also effectively improved electron transfer. Importantly, to further enhance the electrical conductivity and biocompatibility of PB@PANI and to further enhance the electrochemical signal and capture a large amount of Ab₂, Au NPs were doped on the surface of PB@PANI to form Au NPs/PB@PANI nanocomposites. Subsequently, benefiting from the advantages of core-shell structure nanoprobes and gold-platinum bimetallic nanoflower (AuPt NF), a sandwich-type electrochemical immunosensor for CEA detection was constructed, which provided a wide linear detection range from 1.0 pg·mL^-1 to 100.0 ng·mL^-1 and a low detection limit of 0.35 pg·mL^-1 via DPV (at 3σ). Moreover, it displayed a satisfactory result when the core-shell structure nanoprobe-based immunosensor was applied to determine CEA in real human serum samples.

A Sandwich-Type Electrochemical Immunosensor for Insulin Detection Based on Au-Adhered Cu5 Zn8 Hollow Porous Carbon Nanocubes and AuNP Deposited Nitrogen-Doped Holey Graphene

Rapid, accurate, and sensitive insulin detection is crucial for managing and treating diabetes. A simple sandwich-type electrochemical immunosensor is engineered using gold nanoparticle (AuNP)-adhered metal-organic framework-derived copper-zinc hollow porous carbon nanocubes (Au@Cu₅ Zn₈ /HPCNC) and AuNP-deposited nitrogen-doped holey graphene (NHG) are used as a dual functional label and sensing platform. The results show that identical morphology and size of Au@Cu₅ Zn₈ /HPCNC enhance the electrocatalytic active sites, conductivity, and surface area to immobilize the detection antibodies (Ab₂ ). In addition, AuNP/NHG has the requisite biocompatibility and electrical conductivity, which facilitates electron transport and increases the surface area of the capture antibody (Ab₁ ). Significantly, Cu₅ Zn₈ /HPCNC exhibits necessary catalytic activity and sensitivity for the electrochemical reduction of H₂ O₂ using (i-t) amperometry and improves the electrochemical response in differential pulse voltammetry. Under optimal conditions, the immunosensor for insulin demonstrates a wide linear range with a low detection limit and viable specificity, stability, and reproducibility. The platform's practicality is evaluated by detecting insulin in human serum samples. All these characteristics indicate that the Cu₅ Zn₈ /HPCNC-based biosensing strategy may be used for the point-of-care assay of diverse biomarkers.

Impedimetric aptasensor based on zirconium-cobalt metal-organic framework for detection of carcinoembryonic antigen

A zirconium-cobalt metal-organic framework (ZrCo-MOF) was prepared and used as sensing material to fabricate an aptasensor for trace detection of carcinoembryonic antigen (CEA). The ZrCo-MOF integrates the 3D porous structure and abundant defects of the MOF framework, the catalytic activity and inherent redox behavior of Co, and high stability of Zr-MOF, providing abundant active sites to effectively anchor aptamers. As a result, the ZrCo-MOF-based aptasensor shows high sensitivity to detect CEA via specific recognition between aptamer and CEA, as well as the formation of aptamer-CEA complex. A detection limit of 0.35 fg·mL^-1 was deduced from the electrochemical impedance spectroscopy within a wide linear range of 0.001-100 pg·mL^-1 for CEA, which was substantially lower than those of most reported CEA biosensors. The ZrCo-MOF-based aptasensor also shows good selectivity, reproducibility, regenerability, stability, and applicability for human serum sample. Therefore, the developed ZrCo-MOF-based aptasensor will be promising for ultrasensitive detection of biomarkers and the early diagnosis of cancer. This work presents a novel electrochemical aptasensor for the trace detection of carcinoembryonic antigen (CEA) based on a zirconium-cobalt metal-organic framework (ZrCo-MOF), which shows low detection limit of 0.35 fg·mL^-1, high selectivity as well as good reproducibility, regenerability, stability, and applicability. The result provides a promising approach to detect the cancer biomarkers in an early age.

Non-covalent functionalization of triazine framework decorated over reduced graphene oxide as a novel anode catalyst support for glycerol oxidation

The electrocatalytic performance of platinum-gold(Pt-Au) nanoparticles decorated non-covalent functionalization of triazine framework derived from poly(cyanuric chloride-co-biphenyl) over reduced graphene oxide (Poly(CC-co-BP)-RGO) was carried out for glycerol in basic medium and their oxidized products were analysed to support the enhanced activity. The surface morphology and the composition of the catalyst were obtained using X-ray diffraction, transmission electron microscopy and energy-dispersive X-ray spectroscopy. The electrooxidation results illustrate that the Pt-Au/Poly(CC-co-BP)-RGO catalyst exhibits improved catalytic activity and stability when compared to that of Pt/Poly(CC-co-BP)-RGO, Pt/Poly(CC-co-BP) and Pt/RGO catalysts. The better performed Pt-Au/Poly(CC-co-BP)-RGO catalyst was used as electrode material for the fabrication of single test direct alkaline glycerol fuel cell. The fuel cell performance was tested by varying the concentration of glycerol and the temperature of the cell. The maximum power density of 122.96 mWcm^-2 was obtained for Pt-Au/Poly(CC-co-BP)-RGO catalyst in single direct alkaline glycerol fuel cell under the optimum concentration of 2.0 M glycerol at 70 °C.

Gold-Platinum Nanodots with High-Peroxidase-like Activity and Photothermal Conversion Efficiency for Antibacterial Therapy

Combined therapeutic strategies for bacterial infection have attracted worldwide attention owing to their faster and more effective therapy with fewer side effects compared with monotherapy. In this work, gold-platinum nanodots (AuPtNDs) are simply and quickly synthesized by a one-step method. They not only exhibit powerful peroxidase-like activity but also confer a higher affinity for hydrogen peroxide (H2O2), which is 3.4 times that of horseradish peroxidase. Under 808 nm laser irradiation, AuPtNDs also have excellent photothermal conversion efficiency (50.53%) and strong photothermal stability. Excitingly, they can combat bacterial infection through the combination of chemodynamic and photothermal therapy. In vitro antibacterial results show that the combined antibacterial strategy has a broad-spectrum antibacterial property against both Escherichia coli (Gram negative, 97.1%) and Staphylococcus aureus (Gram positive, 99.3%). Animal experiments further show that nanodots can effectively promote the healing of bacterial infection wounds. In addition, owing to good biocompatibility and low toxicity, they are hardly traceable in the main organs of mice, which indicates that they can be well excreted through metabolism. These results reveal the application potential of AuPtNDs as a simple and magic multifunctional nanoparticle in antibacterial therapy and open up new applications for clinical anti-infective therapy in the near future.

Modification of Surface Bond Au Nanospheres by Chemically and Plasmonically Induced Pd Deposition

In this work we investigated methods of modifying gold nanospheres bound to a silicon surface by depositing palladium onto the surfaces of single nanoparticles. Bimetallic Au-Pd nanoparticles can thus be gained for use in catalysis or sensor technology. For Pd deposition, two methods were chosen. The first method was the reduction of palladium acetate by ascorbic acid, in which the amounts of palladium acetate and ascorbic acid were varied. In the second method we utilized light-induced metal deposition by making use of the plasmonic effect. Through this method, the surface bond nanoparticles were irradiated with light of wavelengths capable of inducing plasmon resonance. The generation of hot electrons on the particle surface then reduced the palladium acetate in the vicinity of the gold nanoparticle, resulting in palladium-covered gold nanospheres. In our studies we demonstrated the effect of both enhancement methods by monitoring the particle heights over enhancement time by atomic force microscopy (AFM), and investigated the influence of ascorbic acid/Pd acetate concentration as well as the impact of the irradiated wavelengths on the enhancement effect. It could thus be proven that both methods were valid for obtaining a deposition of Pd on the surface of the gold nanoparticles. Deposition of Pd on the gold particles using the light-assisted method could be observed, indicating the impact of the plasmonic effect and hot electron for Pd acetate reduction on the gold particle surface. In the case of the reduction method with ascorbic acid, in addition to Pd deposition on the gold nanoparticle surface, larger pure Pd particles and extended clusters were also generated. The reduction with ascorbic acid however led to a considerably thicker Pd layer of up to 54 nm in comparison to up to 11 nm for the light-induced metal deposition with light resonant to the particle absorption wavelength. Likewise, it could be demonstrated that light of non-resonant wavelengths was not capable of initiating Pd deposition, since a growth of only 1.6 nm (maximum) was observed for the Pd layer.

Ultrasensitive electrochemical detection of neuron-specific enolase based on spiny core-shell Au/CuxO@CeO2 nanocubes

As a specific biomarker, neuron-specific enolase (NSE) is an essential clinical indicator for diagnosing small cell lung cancer. In this paper, a sandwich-type electrochemical immunosensor was designed for the quantitative detection of NSE. AuPt nanoblock spherical nanoarchitectonics (AuPt NSNs), a bimetallic nanoparticle with a rugged morphology, were utilized as the substrate, which could enhance the electronic conduction and increase the immobilization capacity of the primary antibody (Ab₁). Moreover, through a simple hydrothermal method, Au/Cu_xO@CeO₂ was prepared as a spiny core-shell nanocube with cerium dioxide (CeO₂) and gold nanoparticles (Au NPs) loading. The combination of Cu₂O, CuO, and CeO₂ showed favorable catalytic activity toward hydrogen peroxide (H₂O₂). Furthermore, the deposition of Au NPs on the spiny surface structure enhanced the specific surface area and biocompatibility, thereby rendering it more effective for loading the second antibody (Ab₂). As the label material, the Au/Cu_xO@CeO₂ achieved signal amplification and sensitive detection with the immunosensor. Under optimal conditions, the designed immunosensor possessed a broad linear range of 50 fg mL^-1 to 100 ng mL^-1 and a limit of detection of 31.3 fg mL^-1, along with satisfactory performance in sensitivity, selectivity, and stability.

Electrochemical immunosensor based on binary nanoparticles decorated rGO-TEPA as magnetic capture and Au@PtNPs as probe for CEA detection

Using gold and magnetic nanoparticles co-decorated reduced graphene oxide-tetraethylenepentamine (rGO-TEPA/Au-MNPs) as the magnetic platform for capturing the primary antibody (Ab₁), separation and preconcentration of immunocomplex, a novel homogeneous electrochemical immunosensor was successfully developed. The newly prepared magnetic rGO-TEPA/Au-MNPs, compared with MNPs, exhibited better stability and enhanced electrical conductivity attributed to rGO-TEPA, and showed higher biorecognition efficiency due to AuNPs. In addition, Au@PtNPs were prepared and modified with secondary antibody (Ab₂) as an efficient signal probe for signal readout. Using carcinoembryonic antigen (CEA) as a model analyte, the prepared immunosensor demonstrated satisfactory properties like high stability, good repeatability and selectivity, wide linear range (5.0 pg mL^-1~200.0 ng mL^-1) as well as low detection limit (1.42 pg mL^-1). The homogenous electrochemical immunosensor was applied to the detection of CEA in human serum and was found to exhibit good correlation with the reference method. Thus, the proposed rGO-TEPA/Au-MNPs-based homogenous immunoassay platform might open up a new way for biomarker diagnosis. Graphical Abstract.

An amperometric biosensor based on Cu2O@Au nanocomposites for the detection of galectin-1 via lactose-galectin interactions

In this work, a novel label-free electrochemical biosensor is developed for the detection of galectin-1 (Gal-1) based on gold nanoparticle (AuNP) loaded octahedral Cu₂O (Cu₂O@Au) nanocomposites. The AuNPs on the surface of the Cu₂O nanocrystals not only enhance the electrochemical performance, but also serve as the binding sites for the lactose ligand which can specifically bind with Gal-1. The Cu₂O@Au nanocomposites provide the synergic effect of electrochemical signal amplification and lactose-galectin reaction as the recognition strategy. Under optimal conditions, the proposed biosensor exhibits a variation of electrochemical responses to different concentrations of Gal-1 ranging from 0.1 pg ml^-1 to 10 ng ml^-1. This work presents an alternative electrochemical biosensor for the detection of tumor biomarkers based on a simple and economical lactose ligand incorporated Cu₂O@Au biosensor platform.

Controllable Synthesis of Surface Pt-Rich Bimetallic AuPt Nanocatalysts for Selective Hydrogenation Reactions

Bimetallic nanocatalysts, with efficient and controllable catalytic performance, have a promising application in chemical production. In this study, surface Pt-rich bimetallic AuPt nanoparticles with different Pt/Au ratios were prepared and tested in selective hydrogenation reactions of substituted nitroaromatics. Au nanoparticles were first prepared with n-butyllithium as a rapid reducer, which were further used as seeds in the slow growth process of Pt atoms. Because of the employed sequential reduction method and the following atom diffusion, surface Pt-rich bimetallic AuPt nanoparticles were obtained. Compared with the uniform AuPt alloy nanocatalysts synthesized by the co-reduction method with n-butyllithium as the reducer and monometallic Pt nanocatalysts, the obtained surface Pt-rich AuPt bimetallic nanocatalysts presented an enhanced catalytic selectivity or activity. The performance enhancement is assigned to the optimized Au/Pt interaction in the surface Pt-rich bimetallic nanostructures. This work demonstrates that the optimization of the stoichiometry and construction of bimetallic materials is a feasible method to synthesize controllable and efficient nanocatalysts.

An Exfoliated Graphite-Based Electrochemical Immunosensor on a Dendrimer/Carbon Nanodot Platform for the Detection of Carcinoembryonic Antigen Cancer Biomarker

An electrochemical immunosensor for the quantification of carcinoembryonic antigen (CEA) using a nanocomposite of polypropylene imine dendrimer (PPI) and carbon nanodots (CNDTs) on an exfoliated graphite electrode (EG) is reported. The carbon nanodots were prepared by pyrolysis of oats. The nanocomposites (PPI and CNDTs) were characterized using X-ray powder diffraction (XRD), Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), high-resolution transmission electron microscopy (HRTEM) and scanning electron microscopy (SEM). The proposed immunosensor was prepared on an exfoliated graphite electrode sequentially by drop coating CNDTs, the electrodeposition of G2-PPI (generation 2 poly (propylene imine) dendrimer), the immobilization of anti-CEA on the modified electrode for 80 min at 35 °C, and dropping of bovine serum albumin (BSA) to minimize non-specific binding sites. Cyclic voltammetry was used to characterize each stage of the fabrication of the immunosensor. The proposed immunosensor detected CEA within a concentration range of 0.005 to 300 ng/mL with a detection limit of 0.00145 ng/mL by using differential pulse voltammetry (DPV). The immunosensor displayed good stability and was also selective in the presence of some interference species such as ascorbic acid, glucose, alpha-fetoprotein, prostate-specific antigen and human immunoglobulin. Furthermore, the fabricated immunosensor was applied in the quantification of CEA in a human serum sample, indicating its potential for real sample analysis.

An electrochemical sarcosine sensor based on biomimetic recognition

A nonenzymatic electrochemical sensor is described for the prostate cancer biomarker sarcosine (Sar). Riboflavin was employed to mimic the active center of the enzyme sarcosine oxidase for constructing the biomimetic sensor. The use of riboflavon (Rf) avoids the disadvantages of an enzymatic sensor, such as high cost and poor stability. A glassy carbon electrode (GCE) was modified with a graphene-chitosan (GR) composite and further modified with gold-platinum bimetallic nanoparticles in a polypyrrole (PPy) matrix in order to enhance the catalytic activity of the enzyme mimic. Finally, Rf was electrodeposited on the surface of the AuPt-PPy/GR-modified GCE. Under optimized conditions, the GCE provided high sensitivity and selectivity for Sar at around 0.61 V. Response covers the 2.5-600 μM concentration range, and the detection limit is 0.68 μM. The method was successfully applied to the determination of Sar in spiked urine with 98.0%-103.2% recovery. Graphical abstract Schematic presentation of the fabrication of the Rf/AuPt-PPy/GR/GCE surface and the measurement principle by differential pulse voltammetry (DPV).

A non-enzymatic electrochemical immunoassay for quantitative detection of Escherichia coli O157:H7 using Au@Pt and graphene

Herein, a non-enzymatic sandwich-type electrochemical immunoassay was fabricated for quantitative monitoring of Escherichia coli O157:H7 (E. coli O157:H7). Silica coated Fe₃O₄ magnetic nanoparticles (Fe₃O₄@SiO₂) were modified with mouse anti-E. coli O157:H7 monoclonal antibody (Ab₁) to act as capture probes to reduce detection time and increase the sensitivity of the immunoassay. The Au@Pt nanoparticles were loaded on neutral red (NR) functionalized graphene to form composite complex rGO-NR-Au@Pt. rGO-NR-Au@Pt has high specific surface area and good biocompatibility. rGO-NR-Au@Pt was used as the carriers of detection antibodies (Ab₂). Au@Pt catalyzed the reduction of hydrogen peroxide (H₂O₂) to detection of E. coli O157:H7 with the thionine (TH) as electron mediator to effectually amply the current signal. Under the optimized conditions, a linear relationship between the reduction peak current change (ΔI_pc) and the logarithm of the E. coli O157:H7 concentration is obtained in the range from 4.0 × 10³ to 4.0 × 10⁸ CFU mL^-1 and the limit of detection (LOD) is 4.5 × 10² CFU mL^-1 at a signal-to-noise ratio of 3. The immunoassay exhibits acceptable specificity, reproducibility and stability on the detection of E. coli O157:H7. Furthermore, the immunoassay showed good performance in pork and milk samples. The results suggest that this immunoassay will be promising in the food safety area.

A voltammetric immunosensor for clenbuterol based on the use of a MoS2-AuPt nanocomposite

An ultrasensitive immunosensor for the direct detection of the illegally used livestock feed clebuterol (CLB) is described. It is based on the use of a glassy carbon electrode modified with an MoS₂-AuPt nanocomposite and on biotin-streptavidin interaction. The use of MoS₂-AuPt accelerates electron transfer, and this leads to a sharp increase in the electrochemical signal for the electrochemical probe hydrogen peroxide. Differential pulse voltammetry was used to record the current signal at a peak potential of -0.18 V (vs SCE). Under optimal conditions, the electrode has a linear response in the 10 pg·mL^-1 to 100 ng·mL^-1 CLB concentration range and a 6.9 pg·mL^-1 detection limit (based on the 3σ criterium). This immunosensor is sensitive, highly specific and acceptably reproducible, and thus represents a valuable tool for the determination of CLB in pork. Graphical abstract Schematic of a voltammetric immunosensor for the determination of clenbuterol (CLB) based on the use of a nanocomposite prepared from molybdenum disulfide and a gold-platinum alloy (MoS₂-AuPt), and making use of the biotin-streptavidin system.

A sensitive detection method of carcinoembryonic antigen based on dsDNA-templated copper nanoparticles

A label-free fluorescence assay has been developed for the detection of carcinoembryonic antigen based on dsDNA-templated copper nanoparticles.

Electrochemical immunosensors - A powerful tool for analytical applications

Immunosensors are biosensors based on interactions between an antibody and antigen on a transducer surface. Either antibody or antigen can be the species immobilized on the transducer to detect antigen or antibody, respectively. Because of the strong binding forces between these biomolecules, immunosensors present high selectivity and very high sensitivity, making them very attractive for many applications in different science fields. Electrochemical immunosensors explore measurements of an electrical signal produced on an electrochemical transductor. This signal can be voltammetric, potentiometric, conductometric or impedimetric. Immunosensors utilizing electrochemical detection have been explored in several analyses since they are specific, simple, portable, and generally disposable and can carry out in situ or automated detection. This review addresses the potential of immunosensors destined for application in food and environmental analysis, and cancer biomarker diagnosis. Emphasis is given to the approaches that have been used for construction of electrochemical immunosensors. Additionally, the fundamentals of immunosensors, technology of transducers and nanomaterials and a general overview of the possible applications of electrochemical immunosensors to the food, environmental and diseases analysis fields are described.

Top-down nanofabrication of silicon nanoribbon field effect transistor (Si-NR FET) for carcinoembryonic antigen detection

Sensitive and quantitative detection of tumor markers is highly required in the clinic for cancer diagnosis and consequent treatment. A field-effect transistor-based (FET-based) nanobiosensor emerges with characteristics of being label-free, real-time, having high sensitivity, and providing direct electrical readout for detection of biomarkers. In this paper, a top–down approach is proposed and implemented to fulfill a novel silicon nano-ribbon FET, which acts as biomarker sensor for future clinical application. Compared with the bottom–up approach, a top–down fabrication approach can confine width and length of the silicon FET precisely to control its electrical properties. The silicon nanoribbon (Si-NR) transistor is fabricated on a Silicon-on-Insulator (SOI) substrate by a top–down approach with complementary metal oxide semiconductor (CMOS)-compatible technology. After the preparation, the surface of Si-NR is functionalized with 3-aminopropyltriethoxysilane (APTES). Glutaraldehyde is utilized to bind the amino terminals of APTES and antibody on the surface. Finally, a microfluidic channel is integrated on the top of the device, acting as a flowing channel for the carcinoembryonic antigen (CEA) solution. The Si-NR FET is 120 nm in width and 25 nm in height, with ambipolar electrical characteristics. A logarithmic relationship between the changing ratio of the current and the CEA concentration is measured in the range of 0.1–100 ng/mL. The sensitivity of detection is measured as 10 pg/mL. The top–down fabricated biochip shows feasibility in direct detecting of CEA with the benefits of real-time, low cost, and high sensitivity as a promising biosensor for tumor early diagnosis.

A novel label-free electrochemical immunosensor based on the enhanced catalytic currents of oxygen reduction by AuAg hollow nanocrystals for detecting carbohydrate antigen 199

Herein, bimetallic alloyed AuAg hollow nanocrystals (AuAg HNCs) were prepared by a simple one-pot aqueous method using polycytidysic acid (PCA) as the green growth-directing agent. The novel immunosensor for carbohydrate antigen 199 (CA199) was further constructed based on the enhanced catalytic currents of oxygen reduction reaction (ORR) by AuAg HNCs. By virtue of the good biocompatibility and catalytic activity of AuAg HNCs, the immunosensor exhibited superior analytical performance for the assay of CA199 under the optimal experimental conditions, the ORR signals linearly decreased with the increased CA199 concentrations in the range of 1 ~ 30UmL^-1, with the low detection limit of 0.228UmL^-1, improved stability, reproducibility and selectivity.

Recent Advances in Electrochemical Immunosensors

Immunosensors have experienced a very significant growth in recent years, driven by the need for fast, sensitive, portable and easy-to-use devices to detect biomarkers for clinical diagnosis or to monitor organic pollutants in natural or industrial environments. Advances in the field of signal amplification using enzymatic reactions, nanomaterials such as carbon nanotubes, graphene and graphene derivatives, metallic nanoparticles (gold, silver, various oxides or metal complexes), or magnetic beads show how it is possible to improve collection, binding or transduction performances and reach the requirements for realistic clinical diagnostic or environmental control. This review presents these most recent advances; it focuses first on classical electrode substrates, then moves to carbon-based nanostructured ones including carbon nanotubes, graphene and other carbon materials, metal or metal-oxide nanoparticles, magnetic nanoparticles, dendrimers and, to finish, explore the use of ionic liquids. Analytical performances are systematically covered and compared, depending on the detection principle, but also from a chronological perspective, from 2012 to 2016 and early 2017.

Theophylline-assisted, eco-friendly synthesis of PtAu nanospheres at reduced graphene oxide with enhanced catalytic activity towards Cr(VI) reduction

Theophylline as a naturally alkaloid is commonly employed to treat asthma and chronic obstructive pulmonary disorder. Herein, a facile theophylline-assisted green approach was firstly developed for synthesis of PtAu nanospheres/reduced graphene oxide (PtAu NSs/rGO), without any surfactant, polymer, or seed involved. The obtained nanocomposites were applied for the catalytic reduction and removal of highly toxic chromium (VI) using formic acid as a model reductant at 50°C, showing the significantly enhanced catalytic activity and improved recyclability when compared with commercial Pt/C (50%) and home-made Au nanocrystals supported rGO (Au NCs/rGO). It demonstrates great potential applications of the catalyst in wastewater treatment and environmental protection. The eco-friendly route provides a new platform to fabricate other catalysts with enhanced catalytic activity.

A switched catalysis qualified sealers capped one-step synthesis biocompatibility bimetallic scaffold film for Neu5Acα(2-6)Gal β MP Glycoside specific detection

In this work, a novel label-free biosensor was designed for the sensitive and selective determination of Neu5Acα(2-6)Gal β MP Glycoside using AuPt-PPy(polypyrrole) conductive nanocomposite film as the sensor platform. The introduced AuPt-PPy nanocomposite provided a large surface area for the immobilization of Sambucus nigra agglutinis (SNA) through a coupling agent for specifically recognizing analytes and exhibited high electrocatalytic activity toward the reduction of hydrogen peroxide (H2O2) as an analytical signal. Subsequently, to block the non-specific sites of the modified electrode, GOx was employed instead of the usual sealers. Most importantly, in the presence of glucose, these localized GOx further enhanced the electrochemical signal, which was achieved by the efficient catalysis of glucose. This study is the first that demonstrates the specific detection of Neu5Acα(2-6)Gal β MP Glycoside using AuPt-PPy as the electrocatalytic. Under optimal conditions, the electrochemical biosensor exhibited a wide linear range of 0.01 pgmL(-1)-800 ngmL(-1) with a low detection limit of 0.003 pgmL(-1) (S/N=3), due to the affinity between SNA and Neu5Acα(2-6)Gal β MP Glycoside. Therefore, the co-catalysis signal amplification approach has considerable potential in clinical applications and is suitable for the quantification of other biomarkers.

An ultrasensitive label-free electrochemical immunosensor based on signal amplification strategy of multifunctional magnetic graphene loaded with cadmium ions

Herein, a novel and ultrasensitive label-free electrochemical immunosensor was proposed for quantitative detection of human Immunoglobulin G (IgG). The amino functionalized magnetic graphenes nanocomposites (NH₂-GS-Fe₃O₄) were prepared to bond gold and silver core-shell nanoparticles (Au@Ag NPs) by constructing stable Au-N and Ag-N bond between Au@Ag NPs and -NH₂. Subsequently, the Au@Ag/GS-Fe₃O₄ was applied to absorb cadmium ion (Cd²⁺) due to the large surface area, high conductivity and exceptional adsorption capability. The functional nanocomposites of gold and silver core-shell magnetic graphene loaded with cadmium ion (Au@Ag/GS-Fe₃O₄/Cd²⁺) can not only increase the electrocatalytic activity towards hydrogen peroxide (H₂O₂) but also improve the effective immobilization of antibodies because of synergistic effect presented in Au@Ag/GS-Fe₃O₄/Cd²⁺, which greatly extended the scope of detection. Under the optimal conditions, the proposed immunosensor was used for the detection of IgG with good linear relation in the range from 5 fg/mL to 50 ng/mL with a low detection limit of 2 fg/mL (S/N = 3). Furthermore, the proposed immunosensor showed high sensitivity, special selectivity and long-term stability, which had promising application in bioassay analysis.

Screen-printed electrode produced by printed-circuit board technology. Application to Cancer Biomarker Detection by means of plastic antibody as sensing material

This research work presents, for the first time, a screen-printed electrode (SPE) made on a PCB board with silver tracks (Ag) and a three electrode configuration (AgxO-working, AgxO-counter and Ag/AgxO-reference electrodes), following the same approach as printed-circuit boards (PCBs). This low cost and disposable device was tested for screening a cancer biomarker in point-of-care. The selected biomarker was carcinogenic embryonic antigen (CEA) protein, routinely used to follow-up the progression of specific cancer diseases. The biosensor was constructed by assembling a plastic antibody on the Ag-working electrode area, acting as the biorecognition element of the device. The protein molecules that were entrapped on the polymer and positioned at the outer surface of the polypyrrole (PPy) film were removed by protease action. The imprinting effect was tested by preparing non-imprinted (NPPy) material, including only PPy as biorecognition element. Infrared and Raman studies confirmed the surface modification of these electrodes. The ability of the sensing material to rebind CEA was measured by several electrochemical techniques: cyclic voltammetry (CV), impedance spectroscopy (EIS) and square wave voltammetry (SWV). The linear response ranged from 0.05 to 1.25 pg/mL against logarithm concentration. Overall, producing screen-printed electrodes by means of conventional PCB technology showed promising features, mostly regarding cost and prompt availability. The plastic antibody-based biosensor also seems to be a promising tool for screening CEA in point-of-care, with low response time, low cost, good sensitivity and high stability.

Fabrication of Pd/P nanoparticle networks with high activity for methanol oxidation

The as-prepared Pd/P nanoparticle networks efficiently exhibit electrocatalytic activity and stability for methanol oxidation.

Proximity hybridization-regulated electrochemical stripping of silver nanoparticles via nanogold induced deposition for immunoassay

An electrochemical immunosensor was developed for detection of a biomarkerviatarget-induced proximity hybridization and electrochemical stripping analysis of silver nanoparticles.

Biosensors Incorporating Bimetallic Nanoparticles

This article presents a review of electrochemical bio-sensing for target analytes based on the use of electrocatalytic bimetallic nanoparticles (NPs), which can improve both the sensitivity and selectivity of biosensors. The review moves quickly from an introduction to the field of bio-sensing, to the importance of biosensors in today's society, the nature of the electrochemical methods employed and the attendant problems encountered. The role of electrocatalysts is introduced with reference to the three generations of biosensors. The contributions made by previous workers using bimetallic constructs, grouped by target analyte, are then examined in detail; following which, the synthesis and characterization of the catalytic particles is examined prior to a summary of the current state of endeavor. Finally, some perspectives for the future of bimetallic NPs in biosensors are given.

A novel electrochemical immunosensor based on the rGO-TEPA-PTC-NH₂ and AuPt modified C₆₀ bimetallic nanoclusters for the detection of Vangl1, a potential biomarker for dysontogenesis

The aberrant expression of Vangl1 is highly correlated with dysontogenesis, especially for neural tube defects. Therefore, the ultrasensitive detection of Vangl1 would provide a new approach for the specific early diagnostics in dysembryoplasia. However, no quantitative detection method is currently available. Herein, we describe the development of a new approach to fill this assay gap. We utilized C60-templated AuPt bimetallic nanoclusters for signal amplification because the promising C60 nanomaterial provides a large surface area for the in site reduction of bimetallic nanocomposites as well as excellent conductivity. To further amplify the electrochemical signal, reduced graphene oxide-tetraethylene pentamine (rGO-TEPA) and a derivative of 3,4,9,10-perylenetetracarboxylicdianhydride (PTC-NH2) were selected for modification of the electrode to provide more amino groups for the immobilization of antibodies and to enhance the conductivity. The electrochemical signal was primarily derived from the catalysis of H2O2 by C60-AuPt. Chronoamperometry was applied to record the electrochemical signals. Under optimal conditions, the prepared immunosensor exhibited a wide linear range from 0.1 pg mL(-1) to 450 pg mL(-1) and a low detection limit of 0.03 pg mL(-1). Moreover, the proposed method exhibited good stability and recovery, suggesting its potential for use in clinical research.